home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
OS/2 Shareware BBS: 29 Fixes_o
/
29-Fixes_o.zip
/
v41fix.zip
/
READ.ME
< prev
next >
Wrap
Text File
|
1997-12-15
|
4KB
|
122 lines
READ.ME for IC19488.EXE
Abstract:
---------
APAR Module(s) Version Abstract
------- ---------- ------- ---------------------------------------------
IC19488 afinet.sys 5.3001 TRAP 000E WHEN USING A TCPIP FUNCTION AFTER
aflean.sys INSTALLATION OF FI 1.2, JAVA 1.1.1, MPTS WR00600
AND TCPIP 4.1
Description:
------------
This package provides replacement modules for the "TCP/IP Version 4.1 for OS/2"
tcp/ip stack and DLL's. Note that service is cumulative. See the Change History
below for the APARs applied to the stack and DLL's since "TCP/IP Version 4.1 for
OS/2" GA.
Prerequisites:
-------------
You must have the following installed on your system:
- "TCP/IP Version 4.1 for OS/2", component id 5639B1700, R530
- "MPTS Version 5.30", WR08600.
Installation instructions:
--------------------------
1. You should create a temporary directory and decompress (unzip) IC19488.EXE
into it. Enter the following:
IC19488 .
No subdirectories are created.
2. Since some of the files are locked by the system (the DLL's), to replace
them you must now perform a shutdown of your OS/2 system.
The directions below will walk you thru the procedure for replacing
these files.
3. Reboot your system.
4. As soon as your system begins to boot, and you see the OS2 with a small
white block in the upper left corner of your screen, depress the ALT key and
the F1 key at the same time (ALT-F1).
5. The Recovery Choices screen should be displayed. Press either F2 or "C", as
appropriate for your level of OS/2 Warp, to get a command prompt.
6. Your system will now continue to boot, and should complete with an [X:\]
prompt, where "X" is your boot drive.
7. Change to the drive and temporary directory in which you unzipped the
IC19488.EXE file.
8. The files listed in this directory should replace ANY EXISTING FILES of
the same name currently on your system. DO NOT create a subdirectory for
these files and simply place it in your PATH in CONFIG.SYS. If you do,
it will create multiple copies of DLL'S, and EXE's etc, which could cause
erratic behavior of your system.
9. Place the files in directories as listed in the "Contents" section below.
Note that "y:" is the drive on which MPTN was installed, and "x:" is
the drive on which TCP/IP was installed (x: and y: are usually the same).
10. Reboot your system. You can use Ctrl-Alt-Del or type "exit" on the command
line.
11. Your system should now start normally and all file changes will be in
effect.
12. When your system has completed startup, you can verify that the new
TCP/IP stack is running by issuing the following command from an OS/2
command prompt:
INETVER
The following should be displayed:
Version numbers of TCP/IP protocol drivers:
SOCKETS.SYS 5.3001
AFOS2.SYS 5.3000
AFINET.SYS 5.3001
Contents
--------
The following is a list of the files contained in IC19488.EXE and
the directories in which they should be placed:
y:\mptn\protocol
12-15-97 9:31a 297984 0 afinet.sys
12-15-97 9:31a 198144 0 aflean.sys
11-05-97 9:27p 112128 0 sockets.sys
Change History
---------------
APAR Module(s) Version Abstract
------- ----------- ------- ---------------------------------------
IC19271 sockets.sys 5.3001 POWERWEB SERVER CANNOT BE STARTED
NOTE: This APAR is combined with IC19270. If
APAR IC19270 is installed, there is no need to
install this APAR.
IC19270 sockets.sys 5.3001 DATA PACKETS GREATER THAN 4K SENT TO YOURSELF
ARE NOT FREED
NOTE: This APAR is combined with IC19271. If
APAR IC19271 is installed, there is no need to
install this APAR.