home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
OS/2 Shareware BBS: 29 Fixes_o
/
29-Fixes_o.zip
/
us8210b4.dsk
/
IBMCOM
/
MACS
/
MACS.ZIP
/
ibmcom
/
macs
/
olitok32.nif
< prev
next >
Wrap
INI File
|
1993-05-12
|
4KB
|
121 lines
[OLITOK32]
Type = NDIS
Title = "Olicom Token-Ring Network Server Adapter"
Version = 1.04
DriverName = OLISRV$
Xports = NETBEUI LANDD
[FILE]
Name = OLITOK32.OS2
Path = IBMCOM\MACS
[Adapter]
tag=IoAddress
display = "Select adapter - I/O addresses"
type = decimal
default = "0"
range = 0-7
help = "This parameter is used when the adapter has been reconfigured by
means of the computer set-up program.
0 Primary Adapter (default, I/O address is A18h)
1 Alternate Adapter (I/O address is A24h)
2 Second primary (I/O address is A50h)
3 Second alternate (I/O address is A54h)
4 Third primary (I/O address is 1A18h)
5 Third alternate (I/O address is 1A24h)
6 Fourth primary (I/O address is 1A50h)
7 Fourth alternate (I/O address is 1A54h)"
[EarlyRelease]
display = "Early release"
type = string
strlength = 3
set = "yes","no"
default = "yes"
help = "This parameter specifies the early token release option for
Olicom Token-Ring 16/4 server network adapter cards. The early token
release option reduces the average time that another network adapter
card must wait to gain access to the network. Network adapter cards
that do not support the early token release option ignore this
parameter."
[NetAddress]
display = "Network adapter address"
type = hexstring
strlength = 12
range = 400000000000-4FFFFFFFFFFF
optional = yes
editable = yes
help = "This parameter overrides the network address of the network
adapter card. The value of this parameter is a hexadecimal string of
12 digits, as in 400001020304. The address
must be unique among all other network adapter addresses on the
network. Specify the network adapter address in IBM Token-Ring
Network format."
[MaxTransmits]
display = "Maximum number of queued transmits"
type = decimal
default = 80
range = 2-100
help = "This parameter specifies the maximum number of transmit queue
entries for the network adapter driver. For a server workstation or
gateway workstation, set this parameter to the result of multiplying
the Maximum Transmits Outstanding parameter against the Maximum Sessions
parameter located in the NETBIOS protocol."
[MaxFrameSize]
display = "MaxFrameSize"
type = decimal
range = 1000-17954
default = 17954
help = "This parameter specifies the maximum frame length the driver supports.
Some protocols (like the IBM NETBIOS driver for DOS) requires that the
maximum frame size is below a certain value. If this parameter is omitted
the maximum frame size is set to 17954 bytes on 16Mbit Token-Ring and 4472
bytes on 4Mbit Token-Ring. The MaxFrameSize parameter do not allocate any
resources in the driver."
[MaxRequests]
display = "Max. number of queued general requests"
type = decimal
range = 1-10
help = "Sets the maximum number of outstanding GeneralRequests and configures
the size of GeneralRquest Queue."
[FrameStatus]
display = "FrameStatus"
type = string
strlength = 3
set = "yes","no"
default = "no"
help = "This parameter specifies the value of the framestatus of a
transmitted frame. Some protocols depend on the actual frame status and
others requires a SUCCESS value on all transmitted frames.
If you cannot make a connection to a machine on an other ring you should
try to set this parameter to 'YES'.
'NO' is the default value, 'NO' gives better performance in a server"
[ReOpen]
display = "Re-open on lobe-error"
type = string
strlength = 3
set = "yes","no"
default = "no"
help = "This parameter specifies to the network driver whether it is should
try to reopen the adapter if it closes due to lobe-errors, or not.
The default is NO."
[NDIS201]
display = "Disable NDIS 2.02 support"
type = none
set = "yes","no"
default = "no"
help = "This parameter specifies to the network driver that it may only
support NDIS201 and not the IBM extension to the standard (NDIS 2.02).
If you want to use LSM, LNM or 802.2 the driver you should leave the
support for NDIS 2.02 on. If you want to do NDIS 2.01 conformance test
use the parameter. The default is that the parameter is not used."