home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
OS/2 Shareware BBS: 29 Fixes_o
/
29-Fixes_o.zip
/
ip0t600.zip
/
UN02206.INF
(
.txt
)
< prev
next >
Wrap
OS/2 Help File
|
2002-10-21
|
28KB
|
691 lines
ΓòÉΓòÉΓòÉ 1. Introduction ΓòÉΓòÉΓòÉ
TCP/IP for OS/2 v4.3
FixPak UN_2206
The following versions of TCP/IP are suitable for applying this FixPak.
This FixPak can be applied to:
- IBM TCP/IP for OS/2 v4.30
- IBM TCP/IP for OS/2 v4.31
- IBM TCP/IP for OS/2 v4.32
- WorkSpace On-Demand v2.0 clients with UN02200 or UN02205 installed.
We recommend using MPTS WRx8706 level with this FixPak.
It contains fixes for IBM TCP/IP for OS/2 v4.3, v4.31 and v4.32 Applications,
including FTP, FTPD, and TELNET. It also contains fixes for NFS, DDNS, and
DHCP servers.
Warning: 1 - Archiving is not enabled for this FixPak.
Warning: 2 - If you have installed a Dynamic Host Configuration Protocol
Server v4.3 on your system, please see the instructions in the Post
Installation Procedures section.
Please review the entire Installation section before proceeding. Service to
servers that use "Advanced Features" can be complex.
Good Insurance!
Have appropriate Bootable Standalone Service Diskettes.
ΓòÉΓòÉΓòÉ 1.1. Affected SYSLEVEL Files ΓòÉΓòÉΓòÉ
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Γöé
Γöé AFFECTED SYSLEVELS Γöé
Γöé Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
After installing this FixPak for some or all of the components listed below,
the CURRENT FixPak level of the associated SYSLEVEL file(s) will indicate
UNx2206 (where x indicates the country code.)
SYSLEVEL.TCP IBM TCP/IP for OS/2 v4.3
SYSLEVEL.NFS NFS for TCP/IP on OS/2
SYSLEVEL.DDN IBM OS/2 Dynamic Domain Name Server
SYSLEVEL.DHS IBM OS/2 Dynamic Host Configuration Protocol Server
ΓòÉΓòÉΓòÉ 1.2. Trademarks ΓòÉΓòÉΓòÉ
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Γöé
Γöé TRADEMARKS Γöé
Γöé Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
The following are trademarks of IBM Corporation:
o ADSM
o AT
o CM/2
o DB/2
o DB2/2
o IBM
o LAN Server
o LAN Server Ultimedia (LSU)
o MERVA
o Micro Channel
o Operating System/2
o OS/2
o OS/2 Warp
o OS/2 Warp Connect
o OS/2 Warp Server
o Presentation Manager (PM)
o PS/ValuePoint
o VisualAge
o Win-OS/2
o WorkSpace On-Demand
o XGA
The following are trademarks of other Corporations:
o Adaptec (Adaptec, Inc.)
o ATTISO (AT&T Corporation)
o C++ (American Telephone & Telegraph Company)
o Data Ease (International)
o Lotus 1-2-3 (Lotus Development Corporation)
o Microsoft (Microsoft Corporation)
o MS-DOS (Microsoft Corporation)
o SYTOS (Sytron Corporation)
o Q&A (Symantec)
o Q+E Database Editor (Pioneer)
o TE/2 (Oberon)
o Unicenter (Computer Associates International, Inc.)
o Windows (Microsoft Corporation)
o Windows NT (Microsoft Corporation)
o Word for Windows (Microsoft Corporation)
ΓòÉΓòÉΓòÉ 2. Installation ΓòÉΓòÉΓòÉ
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Γöé
Γöé INSTALLATION Γöé
Γöé Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
This FixPak uses Corrective Service Facility (CSF) 2-B Version 1.44 (provided
in the tools directory of this FixPak) for installation.
Complete instructions for the use of the updated SERVICE and FSERVICE commands
are provided with the CSF Version 2-B README.INF file on the FixTool Diskette.
Please read the CSF instructions for information on the use of CSF Version 2-B
backup and restore capabilities. You should also read the READ.ME file on the
FixTool diskette. It describes the new features included with Version 1.41 of
the FixTool.
Note: - Archiving is not enabled for this FixPak.
Installing the FixPak is essentially a three phase process:
Phase 1 - Quiesce the Target System
Stop all running applications so that LAN Server/Requester is not
in use. (This includes doing a 'net stop server').
Phase 2 - Install the FixPak
Use one of the following methods to replace system files with those
provided on this FixPak:
Selective Install
Redirected (CID) Install
Phase 3 - Return the Serviced System to Normal Operation
Perform a normal system boot.
Post Installation Procedures may be necessary to update Remote IPL images or
DOS LAN Requester clients.
Note: - If asked for permission to replace any files, respond Yes for hidden
or system files, or any private fixes that are indicated as newer than
the FixPak files.
ΓòÉΓòÉΓòÉ 2.1. Selective Install ΓòÉΓòÉΓòÉ
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Γöé
Γöé SELECTIVE INSTALL Γöé
Γöé Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
This method will apply fixes to selected subsystems, partitions, and
directories: The Corrective Service Facility will handle Locked Files
automatically so boot diskettes are not required before applying service.
1. At an OS/2 command prompt, perform a 'net stop server'.
2. Insert Service Tool diskette in the A drive.
3. At an OS/2 command prompt, type "A:SERVICE" and press Enter.
4. Insert FixPak Diskette 1 when prompted.
5. Follow the prompts to the CSF SERVICEABLE PRODUCTS panel. Review
the serviceable products selected on the panel and deselect any
products that you do not want to service at this time. Then
choose the SERVICE push button.
6. Enter (optional) backup path then choose the OK push button.
7. If the APPLICATION IN USE locked files panel is presented, choose
CONTINUE.
8. Follow prompts to complete the process.
9. Remove the diskette from drive A:, then perform the system
Shutdown procedure.
10. Reboot the system normally.
When problems such as insufficient disk space are encountered when performing
the Selective Install, use the Special Situation Install method to perform
service.
ΓòÉΓòÉΓòÉ 2.2. Redirected Installation (CID) Method ΓòÉΓòÉΓòÉ
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Γöé
Γöé REDIRECTED INSTALLATION Γöé
Γöé Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
This method is useful for those who are using the CID (Configuration,
Installation, and Distribution) Services as provided by IBM MPTS. The Selective
Install method is recommended for Servers exploiting 386 HPFS function, Fault
Tolerance, and/or Local Security.
CAUTION:
Before using FSERVICE to apply corrective service, review the sample response
file (RESPONSE.FIL) located on the FixTool diskette. Edit the RESPONSE.FIL, if
necessary, to ensure the service logfile is created in the correct location on
the target workstation.
:LOGFILE d:\os2\install\service.log
where d:\os2\install is the drive and location for the service logfile.
While setting up a CID server is beyond the scope of this document, we have
provided a sample LAN CID Utility REXX Command file segment (UN_2206.CID) that
may prove useful in setting up a CID server for this FixPak.
ΓòÉΓòÉΓòÉ 2.3. Bootable Standalone Service Diskettes ΓòÉΓòÉΓòÉ
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Γöé
Γöé BOOTABLE STANDALONE SERVICE DISKETTES Γöé
Γöé Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
Sometimes it becomes necessary to boot from diskette in order to perform
certain operations on fixed-disk, like installing this FixPak or running CHKDSK
/f.
All necessary files must be contained on diskette. Files from the fixed-disk
should not be referenced in A:\CONFIG.SYS or A:STARTUP.CMD. Otherwise Locked
Files can still exist on the fixed-disk.
Should the need arise to boot from diskette for any reason, you may:
o Use the Install diskette, Diskette 1, and Diskette 2 of Warp Server for
e-business. Escape to A:
o Or, if your hardware has been set up to boot from a CD, use the Server Pak
Installation CD and press F3 when prompted to escape to a command prompt.
CAUTION:
Servers that utilize 386 HPFS and Fault Tolerance must use custom Bootable
Standalone Service Diskettes. Regular HPFS boot diskettes, such as the OS/2
Installation diskettes, CANNOT mirror changes to Fault Tolerance partitions.
To create these custom boot diskettes, see Section 3.2.10 of the README.DOC
file in the IBMLAN directory.
ΓòÉΓòÉΓòÉ 2.3.1. Making OS/2 Bootable Diskettes ΓòÉΓòÉΓòÉ
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Γöé
Γöé MAKING OS/2 BOOTABLE DISKETTES Γöé
Γöé Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
Instructions for creating OS/2 bootable diskettes for requesters.
o For Warp Server for e-business versions:
Use the Install diskette, Diskette 1, and Diskette 2 of Warp Server
for e-business. Escape to A:
ΓòÉΓòÉΓòÉ 2.4. Special Situation Install ΓòÉΓòÉΓòÉ
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Γöé
Γöé SPECIAL SITUATION INSTALL Γöé
Γöé Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
This method will apply all fixes to all partitions and directories:
FSERVICE is used for CID installation of this FixPak, or when problems, such as
insufficient memory for the locked file device driver or corrupted disk drives,
are encountered using the Selective Install method. It does require booting
from diskette to insure that there are no Locked Files during the install
phase.
Warning: - Ensure that all drives to be updated are clean by performing a
CHKDSK /F on each drive before FSERVICE is invoked. There will be no
opportunity to clean up the drives after FSERVICE is invoked.
1. Review the FSERVICE Response File (RESPONSE.FIL on the Service
Tool diskette) and modify as needed to reflect the configuration
of the system to be serviced. Ensure the service logfile is
created in the correct location on the target workstation.
:Logfile d:\os2\install\service.log
where d:\os2\install is the drive and location for the service logfile.
2. Boot from the Bootable Standalone Service Diskettes.
3. Establish A: as the Current Directory.
4. Replace the Boot Diskette with the FixTool Diskette.
5. From the A: prompt, type "FSERVICE" and press Enter.
6. At the panel titled "Installing this Service Pak" press Enter
(Option 1).
7. Follow the prompts provided by the Corrective Service Facility.
8. Reboot the system normally.
ΓòÉΓòÉΓòÉ <hidden> Locked Files ΓòÉΓòÉΓòÉ
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Γöé
Γöé LOCKED FILES Γöé
Γöé Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
Sometimes it is essential that programs own (become the master of) system
resources such as Memory Blocks, Communication Ports, and Files. When a program
stakes claim to a file, that file is said to be Locked; no other program is
allowed to alter (replace or write to) it until the owning program explicitly
removes the lock.
.DLL Files can become Locked by residing in a directory that is included in
the LIBPATH string of CONFIG.SYS.
For example, NETAPI.DLL can be locked when \MUGLIB\DLL exists in the LIBPATH of
CONFIG.SYS.
ΓòÉΓòÉΓòÉ <hidden> Escape to A: from Install Diskettes ΓòÉΓòÉΓòÉ
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Γöé
Γöé ESCAPE TO COMMAND LINE FROM INSTALL DISKETTES Γöé
Γöé Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
To obtain the A: prompt when using the Warp Server for e-business installation
diskettes as Bootable Standalone Service Diskettes:
o Boot the system with Install Diskette in drive A.
o At the IBM Logo Screen - Insert Diskette 1, press Enter.
o When prompted - Insert Diskette 2, press Enter.
o At the IBM OS/2 Warp Server for e-business Setup and Installation
screen - Press F3 to go to a command prompt.
The A: prompt should appear. OS/2 programs, including FSERVICE.EXE, can be
run from here.
ΓòÉΓòÉΓòÉ 3. Post Installation Procedures ΓòÉΓòÉΓòÉ
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Γöé
Γöé POST INSTALLATION PROCEDURES Γöé
Γöé Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
All occurrences of 'tcpip\java\jvc.jar' listed in the 'SET CLASSPATH' statement
in cmd files need to change from:
SET CLASSPATH=....\tcpip\java\jvc.jar;...........
to
SET CLASSPATH=....\tcpip\java\jvc2.jar;...........
The fixpak has a routine that should make this change when the fixpak is
installed. However, if it fails to make the change the cmd file can be changed
with an editor to correct the problem. The related cmd files reside in the
tcpip\bin directory.
No Additional steps must be taken to complete service for TCP/IP.
ΓòÉΓòÉΓòÉ 3.1. MPTS Files Included in this FixPak ΓòÉΓòÉΓòÉ
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Γöé
Γöé MPTS FILES NEEDED FOR DHCP Γöé
Γöé Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
If you are servicing a Warp Server for e-Business system with a Dynamic Host
Configuration Protocol Server 4.3 installed, you may need 2 MPTS
files--DHCPCD.EXE and NSUPDATE.EXE which are included in MPTS fixpak WR08706.
ΓòÉΓòÉΓòÉ 4. Existing Problems ΓòÉΓòÉΓòÉ
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Γöé
Γöé EXISTING PROBLEMS Γöé
Γöé Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
There are no known problems with this FixPak at this time.
ΓòÉΓòÉΓòÉ 5. New Functions ΓòÉΓòÉΓòÉ
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Γöé
Γöé NEW FUNCTIONS Γöé
Γöé Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
This FixPak does not contain any changes, additions, or enhancements.
It is our policy not to include new function in FixPaks. However, as with any
policy there may be exceptions. If any exception occurs in the future, we will
communicate them to you in this section of the documentation.
ΓòÉΓòÉΓòÉ 6. Things that Changed ΓòÉΓòÉΓòÉ
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Γöé
Γöé THINGS THAT CHANGED Γöé
Γöé Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
The following sections describe APAR fix changes that have been made to the
product's executables, messages, or help text.
ΓòÉΓòÉΓòÉ 6.1. TCP/IP APARs ΓòÉΓòÉΓòÉ
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Γöé
Γöé INCLUDED APARS Γöé
Γöé Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
Note: This section describes TCP/IP 4.3 APARs that are corrected in UN_2206.
o APAR = IC25932 FTP SERVER (FTPD.EXE) WILL TRAP WITH SYS3175 DURING
PENETRATION TEST
Shortly after the 3 part handshake session sequence between an ftp client
and the ftp server (Warp Server for e-Business), a datastream of binary data
- without cr (carriage return) and lf (line feed) is sent at a speed of
256k. The data is sent right after the session has been established - no
user login. The trap comes immediately.
o APAR = IC26990 SYS3175 RUNNING IPFORMAT WITH -X SWITCH TO CREATE OUTPUT FILE
IN SNIFFER FORMAT
o APAR = IC27625 KILLING A RPC-CLIENT WHILE WAITING FOR SERVER-RESPONSE,
RESULTS IN A SYS3175 IN RPC32DLL.DLL.
o APAR = IC27721 THERE IS A PROBLEM IN FTPD WHERE THE DAEMON WILL CRASH THUS
CREATING A SITUATION WHERE FTP REQUESTS ARE DENIED.
o APAR = IC27838 FTP STOPS DUE TO AN INTERNAL ERROR.
Using Warp Server for e-Business(WSeB), Fixpak1, and TCPIP v4.3. After a few
days FTP terminates abnormally due to this error: DosRequestMutexSem error
for hexMutex: Return Code = 105
o APAR = IC29214/IC29215 LPRPORTD HANGS WAITING FOR A ACK FROM THE LPD (HP).
o APAR = IC29225 OS/2 FTPD SERVER DOES NOT ACCEPT GET COMMAND AFTER PREVIOUS
ERROR
o APAR = IC29248 NFS 3.0 CLIENT FAILS TO FIND FEW CASES OF FILE NAMES. CASE
CHAR. PROBLEM
o APAR = IC29254 AFTER UPGRADE NFS CLIENT FROM V2 TO V3, THEY SEE DUPLICATE
XID PROBLEM.
o APAR = IC29410 WHEN WINDOWS INTERNET EXPLORER ATTEMPTS TO CONNECT TO OS/2
FTP SERVER IT REPORTS AN ERROR
o APAR = IC29628 0X1A IS PLACED AT THE END OF FILE AFTER AN ASCII MODE FTP
TRANSFER.
o APAR = IC29640 TELNET (OR FTP) WAS NOT USING THE HARDWARE ADDRESS ADDED
THROUGH ARP (WITH -S PUB OPTION ) AND RAISED ARP QUERIES.
o APAR = IC29642 TRAP IN MIB_2.EXE WHILE ACCESSING SOME VARIABLE'S OF THE
GROUP TCP AND UDP.
o APAR = IC29852 WHEN A USER LOGS ON TO THE FTP SERVER, THE PASSWORD IS SHOWN
IN CLEAR TEXT IN THE LOG FILE.
o APAR = IC29898 TIME INTERVAL BETWEEN PRINT JOBS WAS HIGH.
o APAR = IC30022 UNABLE TO PRINT LARGE FILES THROUGH PSF/2, WHICH USES LPRMON
RC=8 ERROR OCCURS IN LPRMON WINDOW
o APAR = IC30034 PROBLEM WITH FTPD FROM WSEB CLIENT PAK AND OPTICAL DRIVES.
o APAR = IC30142 LPRPORTD PROCESS HANGS WHEN PRINTING SEVERAL SMALL JOBS TO
THE 8150 PRINTER.
o APAR = IC30274 COPYING FILES TO NFS MOUNTED DIRECTORY (OS/2 NFS SERVER)
GIVES PROBLEM IN COPYING AFTER INITIAL SUCCESS.AIX NFS CLIENT.
o APAR = IC30770 RXSOCK DOES NOT WORK PROPERLY WHEN USING OBJECT REXX
o APAR = IC30890 DEBUG MESSAGES GETTING LOGGED EVEN IF THE CONFIGURATION IS
SET TO NOT LOG THE MESSAGES.
o APAR = IC31610 MAKE FTPD RETURN ERROR IF IP ADDR. MENTIONED IN PORT CMD IS
DIFFERENT FROM THAT OF THE CONTROLLING HOST SYSTEM.
Make ftpd.exe return error if IP address mentioned in PORT cmd is different
from that of the controlling host system. To provide user with an option |
-e | so that when ftpd.exe is invoked with that option then verification of
IP address in PORT cmd is disabled.
o APAR = IC31611 MAKE FTPD.EXE LOG MESSAGES WITH THE CORRESPONDING SOCKET
NUMBER.
o APAR = IC31851 TELNET -T ANSI TRAPS
Running Telnet -t ansi hostname and typing in the login information quickly
before the prompt appears results in a trap.
o APAR = IC31852 ERROR REPOSITIONING CURSOR WHEN USING BACKSPACE KEY AFTER CLS
IN A TELNET -T ANSI DEFAULT SESSION
o APAR = IC31853 RUN REXX PROGRAM CALLING SYSCLS() THROUGH TELNET, TEXT WILL
BE LEFT ON LAST LINE
o APAR = IC31854 TELNET NOT DISPLAYING SPECIAL CHARACTERS
o APAR = IC31975 IAC NOT PROPERLY RETURNED TO THE CLIENT FROM SERVER WITH CODE
PAGE 866
o APAR = IC32064 WINDOW SIZE 25X80 DOESN'T WORK IN TELNET.
o APAR = IC32184 SENDMAIL CHECK_RELAY AND CHECK_RCPT RULESET NOT WORKING
PROPERLY
o APAR = IC32625 TRAP IN LPRPDRVR.PDR DUE TO MALLOC LIBRARY FUNCTION
o APAR = IC32688 LPRPORTD HANGS WHILE PRINTING TO LPD PRINTER.
o APAR = IC32980 LPRPORTD PROCESS HANGS WHEN PRINTING SEVERAL SMALL JOBS TO
THE 8150 PRINTER.
o APAR = IC33138 MULTIHOMED FTPD SERVER DOES NOT BUILD A DATA CONNECTION TO
THE CLIENT IF THE CLIENT USES AN ALIAS IP ADDRESS FOR CONNECTION
o APAR = IC33179 IN WINDOW SIZE WITH HEIGHT 43 , TELNET CLIENT BEEPS
CONTINUOUSLY IN COMMAND MODE
o APAR = IC33479 MEMORY LEAK DUE TO THE EXHAUSTIVE USE OF SYSTEM MBUFS BY
ROUTING TABLE ENTRIES.
o APAR = IC33811 SYS3175 TRAP IN TELNET.EXE WHEN SOCKS ERROR OCCURS
o APAR = IC33967 A DIRECTORY CANNOT BE REMOVED FROM THE FTP SERVER SIDE IF THE
CLIENT ACCESSES THE DIRECTORY AND QUITS CONNECTION.
o APAR = IC33972 LPRPORTD GIVES PROBLEM WHEN A ZERO BYTE FILE IS PRINTED.
ΓòÉΓòÉΓòÉ 6.2. NFS APARs ΓòÉΓòÉΓòÉ
o APAR = IC24063/IC24940 NFSD.EXE PROBLEM WITH SCO UNIX 7.0.1
o APAR = IC24434 NFSD.EXE FAILS TO START - "BIND FAILED WITH 10048 AT 885 IN
SVC.C"
o APAR = IC24762 PERMISSIONS NOT BEING UPDATED BY NFS SERVER.
o APAR = IC26147 NFS - SYS0050 ERROR DURING COPY OF FILE FROM OS/2 TO MVS
o APAR = IC28455 FILE CONTENTS GETTING CORRUPTED ON THE MOUNTED DRIVE WHEN
USING ANY EDITOR IN NFS 3.0
o APAR = IC28584 FILE ON NFS COULD NOT BE REMOVED BY DOS AND WIN/OS2 WINDOW.
o APAR = IC29667 NFS300.IFS MODULE IS NOT ABLE TO OPEN A FILE RESIDING ON SCO
UNIX SERVER DUE TO BUFFER CORRUPTION.
o APAR = IC30023 CREATING MORE THAN 64K FILES ON A NFS MOUNTED DRIVE CAUSES
NFSD TO TERMINATE.
o APAR = IC30220 OS/2 NFS SERVER FAILS TO RENAME FILES FROM AIX NFS CLIENT.
o APAR = IC30957 QMOUNT OUPUT FOR REMOTE DRIVES IS NOT PROPERLY FORMATTED.
o APAR = IC31976 NFS CLIENT(NFS300.IFS) DOES NOT PROCESS DBCS CHARS CORRECTLY.
o APAR = IC33052 TRAP D IN NFS300.IFS MODULE,USING PMSHELL GUI TO BROWSE THE
EXPORTED DIR FROM SUN SOLARIS M/C
o APAR = IC33808 DIRECTORY OPERATIONS INVOLVING DBCS FILE NAME GIVES PROBLEM
WITH NFS300.IFS MODULE.
ΓòÉΓòÉΓòÉ 6.3. DYNAMIC DOMAIN NAME SERVER APARs ΓòÉΓòÉΓòÉ
o APAR = IC27146 DNS IS INTERMITTENTLY UNABLE TO RESOLVE HOSTNAMES WHEN THE
QUERY IS FORWARDED TO EXTERNAL DNS ON THE INTERNET
o APAR = IC29258 DDNS ADMIN GUI NOT RECOGNIZING NAMED.CA ENTRIES_
o APAR = IC29302 SECONDARY DDNS NOT GETTING UPDATED.
o APAR = IC29511 PROBLEM WITH DDNS SERVER ADMINISTRATOR GUI (ORION.JAR).
o APAR = IC30288 STACK OVERFLOW IN DDNS
o APAR = IC30557 DNS RUNNING ON WSEB WILL STOP RESOLVING NAMES
o APAR = IC30610 THE DNS QUERY WAS NOT REFORWARDED BY DDNS SERVER
o APAR = IC33647 WINNT CLIENTS UNABLE TO RENEW DYNAMIC IPADRESSES FROM AN WSEB
DHCP SERVER.
o APAR = IC33648 DHCP SENDS MORE THAN THREE ARP PACKETS TO CHECK IF THE IP
ADDRESS IS ALREADY IN USE. THIS DEGRADES ITS PERFORMANCE.
o APAR = IC33688 WAITCUSRSOR PROBLEM WITH JAVA1.1.8 WITH DDNSSGUI/DHCPSGUI
APPLICATIONS.
ΓòÉΓòÉΓòÉ 6.4. DYNAMIC HOST SERVER APARs ΓòÉΓòÉΓòÉ
o APAR = IC31215 OFFER PACKET OF DHCP SERVER HAS DUPLICATE OPTION 54.
o APAR = IC32953 DHCPSD.EXE TRAPS (SYS3175) WHEN WIN 2000/XP CLIENTS GENERATE
DHCP REQUESTS.
o APAR = IC33647 WINNT CLIENTS UNABLE TO RENEW DYNAMIC IPADRESSES FROM AN WSEB
DHCP SERVER.
o APAR = IC33899 DHCP SERVER DOES NOT AUTHENTICATE DHCP REQUEST MESSAGE FOR
THE LISTED CLIENTS.
ΓòÉΓòÉΓòÉ 7. Appendix ΓòÉΓòÉΓòÉ
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Γöé
Γöé APPENDIX Γöé
Γöé Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
Appendix of other interesting topics.
ΓòÉΓòÉΓòÉ 7.1. Printing Information from this On-line Document ΓòÉΓòÉΓòÉ
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Γöé
Γöé PRINTING INFORMATION Γöé
Γöé Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
The OS/2 view function provides a print capability to the printer defined as
the "default" printer for your system. From the "Services" popup, selecting
print provides several options; Print All, Marked, or This Section(s),
Contents, or Index.
All but the Print Marked Sections are fairly self explanatory. To Print
"Marked" sections one must first know how to "Mark". It is best to do this with
the contents window fully expanded, ie. every section shows up in the content
panel. Then simply press the space bar when the section you chose is
highlighted or point and click the left mouse button while also holding the
ctrl key to "mark" a section for print.
The highlighting for "marked sections" is slightly larger than normal
highlighting. To notice the difference, select an item in the contents and
repeatedly press the space bar.
ΓòÉΓòÉΓòÉ <hidden> ΓòÉΓòÉΓòÉ
The item in the title line is a trademark of IBM Corporation
ΓòÉΓòÉΓòÉ <hidden> ΓòÉΓòÉΓòÉ
The item in the title line is a trademark of Microsoft Corporation
ΓòÉΓòÉΓòÉ <hidden> ΓòÉΓòÉΓòÉ
The item in the title line is a trademark of Apple Computer
ΓòÉΓòÉΓòÉ <hidden> ΓòÉΓòÉΓòÉ
The item in the title line is a trademark of Lotus Development Corporation
ΓòÉΓòÉΓòÉ <hidden> ΓòÉΓòÉΓòÉ
The item in the title line is a trademark of Ungermann-Bass, Inc.
ΓòÉΓòÉΓòÉ <hidden> ΓòÉΓòÉΓòÉ
The item in the title line is a trademark of Wall Data Corporation
ΓòÉΓòÉΓòÉ <hidden> ΓòÉΓòÉΓòÉ
The item in the title line is a trademark of Attachmate Corporation