home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
OS/2 Shareware BBS: 29 Fixes_o
/
29-Fixes_o.zip
/
PSF2CSD.ZIP
/
PSF2V110.BUC
< prev
Wrap
Text File
|
1994-04-09
|
36KB
|
525 lines
1
P S P B U C K E T T A B L E O F C O N T E N T
PSFOS2V1 PG 001
PSFOS2V1 SUBSET: PSF2/110 PG 007
1
UPGRADE: PSFOS2V1 INTRODUCTORY TEXT PG 001 OF 022
************************
* UPGRADE PSFOS2V1 *
************************
THIS UPGRADE CONTAINS INSTALLATION INFORMATION AND/OR HIGH
IMPACT/PERVASIVE APAR INFORMATION FOR VERSION 1, RELEASE 0,
MODIFICATION 0 FOR PSF FOR 0S/2.
************************************************************************
* P R O D U C T I N D E X *
************************************************************************
PID NUMBER SYSTEM DESCRIPTION SUBSET ID
5601298 OS/2 PSF/2 1.0 PSF2/100
5601298 OS/2 PSF/2 1.1 PSF2/110
5601298 OS/400 PSF/2 1.1 FOR OS/400 OS/400
UPGRADE: PSFOS2V1 ADDITIONAL TEXT PG 002 OF 022
HIGH IMPACT/PERVASIVE (HIPER) APAR INSTRUCTIONS
Included in this Upgrade may be one or more APARs that describe
problems that are of a High Impact or extremely pervasive nature. The
following fields provide an outline of those APARs in section 4:
"PROBLEM:" Brief description fo the APAR
"USERS AFFECTED:" If you have this Product/device/situation, you are
exposed to the problem. The APAR or PTF fix should be applied in
those cases.
"RECOMMENDATION:" Take action that is described, most often that will
be the application of an APAR or PTF fix.
VOLID'S
VOLID 1000 - Reflects corrective service (not on a PUT tape)
1
UPGRADE: PSFOS2V1 ADDITIONAL TEXT PG 003 OF 022
VOLID 9XXX - Reflects a PUT tape that the PTF can be located
on.
VOLID FXXX - Reflects a PUT tape. The 'F' represents a '9'
and the XXX represents a PUT number.
******* ATTENTION: MVS SMP/E USERS (CBPDO NO CHARGE OFFERING): *****
Customers ordering the Custom Built Product Delivery Offering (CBPDO)
also receive PSP information in softcopy.
In addition, CBPDO "VOLIDs" will appear in the PSP subset sections
3, 4 and 5. A VOLID of "1YWW", where Y is the year and WW is the week
within that year, indicates that the PTF was included on that CBPDO
and successive CBPDOs.
Customers wishing more information should contact their IBM Marketing
Branch Office.
UPGRADE: PSFOS2V1 ADDITIONAL TEXT PG 004 OF 022
1
UPGRADE: PSFOS2V1 ADDITIONAL TEXT PG 005 OF 022
UPGRADE: PSFOS2V1 ADDITIONAL TEXT PG 006 OF 022
1
UPGRADE: PSFOS2V1 SUBSET: PSF2/110 INTRODUCTORY TEXT PG 007 OF 022
***********************
* SUBSET PSF2/110 *
***********************
THIS SUBSET CONTAINS INSTALLATION INFORMATION FOR PSF/2 VERSION 1,
RELEASE 1, MODIFICATION 0.
************************************************************************
* C H A N G E S U M M A R Y *
************************************************************************
DATE LAST
CHANGED SECTION
1. 94/04/01 INSTALLATION INFORMATION
2. 93/02/23 DOCUMENTATION CHANGES
3. 94/04/01 GENERAL INFORMATION
4. YY/MM/DD SERVICE RECOMMENDATIONS NO ENTRIES
5. 94/04/01 CROSS PRODUCT DEPENDENCIES
UPGRADE: PSFOS2V1 SUBSET: PSF2/110 INTRODUCTORY TEXT PG 008 OF 022
SERVICE RECOMMENDATION SUMMARY
DATE APAR PTF VOLID COMMENTS
1. YY/MM/DD XXXXXXX XXXXXXX XXXX XXX
************************************************************************
* SECTION 1. I N S T A L L A T I O N I N F O R M A T I O N *
************************************************************************
THIS SECTION CONTAINS CHANGES TO THE PRODUCT'S PROGRAM DIRECTORY.
2. 93/02/15 If you are going to be sending jobs from HOST environment,
please make sure to obtain the 'Distributed Printing
With PSF/2'; 'An Installation Cookbook for System/370
Communication Manager/2, DataBase/2 Version'. There is
also an Extended Services Edition.
You can also get an AS/400 Cookbook with DB/2 OS/2 and
1
UPGRADE: PSFOS2V1 SUBSET: PSF2/110 INTRODUCTORY TEXT PG 009 OF 022
Communication Manager/2. These can be obtained through
your Pennant Rep or by calling the IBM Support Center
1-800-237-5511.
To further ensure that problems are not encountered, users
should also contact their Pennant Systems representative
to order the latest corrective service PTF for PSF/2
1.10.
o When selecting the components of PSF/2 1.10 Print
Server that are to be installed, do not select the
Resource Librarian unless you want to have your all of
your existing resource entries to be deleted and re-
placed with entries from the current installation.
1. 93/01/12 ITEM DELETED 94/04/01
************************************************************************
* SECTION 2. D O C U M E N T A T I O N C H A N G E S *
UPGRADE: PSFOS2V1 SUBSET: PSF2/110 INTRODUCTORY TEXT PG 010 OF 022
************************************************************************
THIS SECTION OUTLINES MAJOR ERRORS IN THE PRODUCT'S PUBLISHED
DOCUMENTATION.
3. 93/02/23 IBM PSF/2 GETTING STARTED VERSION 1.1 page 22 Token-ring
network software requirements first bullet first dash reads
apar OY51428. It should read OY51438.
2. 93/02/23 IBM PSF/2 GETTING STARTED VERSION 1.1 page 21 SDLC
communications link software requirements first bullet
first dash mentions apar OY51428. It should be OY51438.
1. 93/01/27 The PSF/2 Getting Started Manual (G544-3767-01) needs to be
changed to reflect the following:
- Page 44, item #2, the bulleted item that references Page
43, step 5 is incorrect. It is item C under Page 43,
step 5 that applies.
- Page 43, step 5, item C, needs to be expanded to assign
1
UPGRADE: PSFOS2V1 SUBSET: PSF2/110 INTRODUCTORY TEXT PG 011 OF 022
an alias to the \PSF2\BINSHARE subdirectory.
************************************************************************
* SECTION 3. G E N E R A L I N F O R M A T I O N *
************************************************************************
THIS SECTION CONTAINS GENERAL INFORMATION, I.E. SYSGEN HINTS/TIPS.
16. 93/09/15 For PSF/2 Channel attached printer hangs, the following
actions should be performed:
a) Ensure that you have at least PSF/2 CSD UR40232 on
(10/5/93).
b) Verify that the S/370 card isn't in the last slot
c) Change the interrupt level of the S/370 card to 10
d) Ensure the latest printer microcode is on
15. 93/09/13 PSF/2 1.1.0 is now supported with OS/2 2.1. Please see
Flash 9335. It can be referenced in ASKQ as item number
G023304.
UPGRADE: PSFOS2V1 SUBSET: PSF2/110 INTRODUCTORY TEXT PG 012 OF 022
PSF/2 1.1.0 problems with OS/2 2.1 Service Pack (CSD'S)
Flash 9405 updated 2/25/94. ASKQ Item G107005
14. 93/08/24 Corrective service diskette UR39825 for PSF/2 1.1 requires
that REXX be installed on OS/2. Failure to have REXX
installed results in message SYS1801 'OS/2 Precedures
Language 2 / REXX is not installed' when trying to install
CSD UR39825.
13. 93/07/02 Problem Summary: The output on a 4019/4029/4039 is
incorrout. The left side at the beginning of every
line has black marks that look like pems. This
happens on the very first word of each line. Some
of the words also look smeared and wavy and may
also have a dotted line through the word. It
follows no consistent error pattern.
Running on a d/t9595 or d/t9590 with the new BIDI
parallel port, what could be the problem? (It may
be that this would happen on other machines as
1
UPGRADE: PSFOS2V1 SUBSET: PSF2/110 INTRODUCTORY TEXT PG 013 OF 022
well.) The output is incorrout even when PSF/2 is
not used and/or installed.
Solution: It may be an arbitration level problem on the
parallel port. Have the user change the setting to
the following: Parallel Port Arbitration Level Y
Disabled " This can only be done through the
reference diskette for their machine. Other
settings may work, but this was found to solve the
problem in this particular situation.
12. 93/04/19 MVS apar OY62792 is required on PSF/MVS to prevent an
abend0C4 PIC11 at X'95' into APSCOPCI when printing to
PSF/2 using DPF. See Cross Product Dependencies Section.
11. 93/04/16 If you intend to install POSTSCRIPT support, be sure to
also click on Outline Fonts. POSTSCRIPT requires outline
fonts, and will not work until they are installed.
10. 93/03/11 MSGAIN1042E RC110 DOSOPEN ERROR ON F01B00xx.SBF
UPGRADE: PSFOS2V1 SUBSET: PSF2/110 INTRODUCTORY TEXT PG 014 OF 022
The above error was ncountered after multiple installations
of PSF/2 which led to the over writing of the DATABASE.
Follow the below procedure to correct the problem.
The procedure to clean out the DPF IPDS Resource database
is as follows:
1-Erase all resource files in the DPF resource
subdirectories. These subdirectories are defined in the
Spool Manager, and they are different for each Host
Receiver spool that is defined.
2-You need to delete the resource entries from the Database
Manager. Enter Query Manager, highlight the AINLIB
database. From there you select Actions, then Open.
This gives you a new screen where you need to select the
top most button (Tables and Views). This leads to yet
another screen, where you select Commands, then SQL
Query. This leads to the screen where you actually do
the deletes. Enter the command DELETE FROM IPDS_RESOURCE
in the large box, and the select Actions, then Run from
1
UPGRADE: PSFOS2V1 SUBSET: PSF2/110 INTRODUCTORY TEXT PG 015 OF 022
the menu. If there are errors, the database need to be
deleted and PSF/2 reinstalled (because the database is
probably dead).
9. 93/03/09 Errors while printing to a channel attached printer from a
MOD95 PC. If the 370 channel card isn't properly seated in
the MOD95 PC, traps and other errors may appear. A symptom
is that the printer will print for a while and then stop.
The channel cable seems to be unseating the channel card.
8. 93/02/04 Corrective service maintenance for PSF/2 is in the form of
Corrective Service Diskettes (CSD) and is available upon
request from the IBM Support Center. The CSDs are
identified by a PTF number and contain cumulative service.
The first CSD was issued the week of 1/8/93.
The current CSD as of 3/18/94 is UR40768 for English.
For information on future CSDs, call the IBM Support
Center.
UPGRADE: PSFOS2V1 SUBSET: PSF2/110 INTRODUCTORY TEXT PG 016 OF 022
7. 93/02/04 Direct all installation/configurations questions and
problems to Pennant Systems Technical Marketing Support or
Systems Engineers and they can provide support through the
HONE ASKQ system.
6. 93/02/03 If you receive message msgAIN0021e with PRT GROUP 1, ERROR
1414, RECEIVE TYPE 18, you need to set the DIP switches in
the 3820.
A card in the 3820 has two (2) dip switches that control
the CONTROL UNIT ADDRESS, which is different than the
STATION ADDRESS that the customer can set via
configuration. Only a CE can change the dip switch
settings. When you sync the address of the card to the
PSF/2 device panel everything works without error.
5. 93/01/29 When installing DPF to connect the host to PSF/2, the
following apars are required on the host:
(Please see Cross Product Dependencies for more)
1
UPGRADE: PSFOS2V1 SUBSET: PSF2/110 INTRODUCTORY TEXT PG 017 OF 022
OY51438 for MVS
PN23680 and PN26700 for VM
SA25232 or the most current apar level for OS/400
4. 93/01/25 ITEM DELETED 93/01/28
3. 93/01/19 Any PSF user with Group3 printers attached, using the
group3 writer proc and installing PSF/2 should change to
their SNA writer proc. Note, that when you change to the
SNA writer proc, the default for DATACK is UNBLOCK. You
should change this setting to DATACK=BLOCK. Failure to do
so may effect performance and error messages msgAIN0478e
and msgAIN0485i may be issued.
2. 92/12/02 At install time, install the first CSD and THEN define the
print queues. If this is not done, the print queues will
have to be deleted, the CSD installed, and then the print
queues will need to be defined.
UPGRADE: PSFOS2V1 SUBSET: PSF2/110 INTRODUCTORY TEXT PG 018 OF 022
1. 92/12/02 In the DPF Configuration Guide, page 91 needs to be
clarified. The note concerning the MAXDATA= parameter
needs to be specified in decimal. The 'Maximun RU size'
parameter as shown on the top panel on page 94 also needs
to be specified in decimal.
************************************************************************
* SECTION 4. S E R V I C E R E C O M M E N D A T I O N S *
************************************************************************
1. YY/MM/DD PROBLEM:
USERS AFFECTED:
RECOMMENDATION: INSTALL XXXXXXX ON VOLID XXXX
************************************************************************
* SECTION 5. C R O S S P R O D U C T D E P E N D E N C I E S *
************************************************************************
THIS SECTION CONTAINS INFORMATION THAT IS DEPENDENT UPON ANOTHER
1
UPGRADE: PSFOS2V1 SUBSET: PSF2/110 INTRODUCTORY TEXT PG 019 OF 022
PRODUCT OTHER THAN THIS SUBSET ID.
9. 94/04/01 INTERDEPENDENT PRODUCT: MVS/PSF 2.1.0 or 2.1.1
PROBLEM: PSF/MVS V2.1.0 Support for Inline Resources at the
document level. NEW FUNCTION
USERS AFFECTED: All PSF/MVS 2.1.0 and 2.1.1 users who wish
to use data set level inline fonts, page
segments or overlays.
RECOMMENDATION: Install PTF UW01310 on volid 9312.
8. 94/04/01 INTERDEPENDENT PRODUCT: MVS/PSF 2.1.0 or 2.1.1
PROBLEM: Form ID not being passed to RPM V3 or PSF/2 after
PTF UY94833 is applied.
USERS AFFECTED: All users of PSF/MVS 2.1.0 or PSF/MVS 2.1.1
with RPM or PSF/2 printers.
RECOMMENDATION: Install PTF UW04421 on volid 1413.
7. 94/04/01 INTERDEPENDENT PRODUCT: MVS/PSF 2.1.0 or 2.1.1
PROBLEM: New Function APAR to provide new FORMDEFS and
UPGRADE: PSFOS2V1 SUBSET: PSF2/110 INTRODUCTORY TEXT PG 020 OF 022
PAGEDEFS for use with DPF.
USERS AFFECTED: All PSF/MVS 2.1.0 or 2.1.1 Users who drive
HP-CL4 or PPDS printers via the DPF
function of PSF/2, use the fourth input
bin on the 3935 or use a 3900 Duplex
Printer.
RECOMMENDATION: Install PTF UW03721 (JPRF113) on volid 1413
6. 94/04/01 INTERDEPENDENT PRODUCT: MVS/PSF 2.1.0
PROBLEM: Distributed Print Function Support for PSF/2 (DPF)
USERS AFFECTED: All PSF/MVS 2.1.0 users who use the PSF/2
Distributed Print Function (DPF).
RECOMMENDATION: Install PTF UY87195 on volid 9210.
5. 93/09/15 INTERDEPENDENT PRODUCT: OS/2 2.0
PROBLEM: SYS0008 or TRAP0008 out of memory condition
USERS AFFECTED: All PSF/2 1.1 users.
RECOMMENDATION: Install OS/2 2.0 SERVICE PACK II
1
UPGRADE: PSFOS2V1 SUBSET: PSF2/110 INTRODUCTORY TEXT PG 021 OF 022
4. 93/09/14 INTERDEPENDENT PRODUCT: VSE/PSF2.2.0
PROBLEM: Remove requirement for job separator pages when
sending print jobs to RPM version 3.0 or DPF
(PSF/2) from VSE/PSF Version 2.2
USERS AFFECTED: All VSE/PSF 2.2 users that use RPM V3 or
DPF(PSF2)
RECOMMENDATION: INSTALL PTF UD48828 ON VOLID XXXX
3. 93/06/28 INTERDEPENDENT PRODUCT: MVS/PSF 2.1.0
PROBLEM: When printing to PSF/2 using DPF ABEND0C4 PIC11 at
x'95c' into APSCOPCI
USERS AFFECTED: ALL MVS/PSF 2.1.0 and 2.1.1
RECOMMENDATION: INSTALL PTF UY92850 ON VOLID 9304
INTERDEPENDENT PRODUCT: MVS/PSF 2.1.0 and 2.1.1
2. 93/06/28 PROBLEM: SEP=Y or HEADER=YES should not have to be
specified for DPF (PSF/2) to process jobs sent
down from PSF.
UPGRADE: PSFOS2V1 SUBSET: PSF2/110 INTRODUCTORY TEXT PG 022 OF 022
USERS AFFECTED: PSF/MVS 2.1.0 and 2.1.1 users with PSF/2
(DPF)
RECOMMENDATION: INSTALL PTF UW04421 ON VOLID 1413
1. 93/06/10 ITEM DELETED 93/09/15
************************************************************************
* I N F O R M A T I O N A L / D O C U M E N T A T I O N *
* APARS FOLLOW (IF ANY) *
************************************************************************
1