home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
OS/2 Shareware BBS: 29 Fixes_o
/
29-Fixes_o.zip
/
LSP138D1.DSK
/
DOS
/
IBMTOK.NIF
< prev
next >
Wrap
INI File
|
1994-11-02
|
5KB
|
160 lines
[IBMTOK]
Type = NDIS
Title = "IBM Token-Ring Network Adapters with NDIS support (IBMTOK.DOS)"
Version = 1.0
DriverName = IBMTOK$
Copyfile = LT2.MSG
[FILE]
Name = IBMTOK.DOS
[EARLYRELEASE]
display = "Early Token Release"
type = none
default = yes
set = yes,no
optional = yes
editable = yes
virtual = no
help = "This parameter specifies the Early Token Release option for
IBM Token-Ring 16/4 adapters. This option allows the adapter to
release a new token as soon as it has received back the header of its
previously-sent frame and thus reduces the average time that another
adapter must wait to gain access to the network. Adapters that do not
support the Early Token Release option ignore this parameter.
Enter YES or NO. The default for 16/4 adapters is YES."
[RAM]
display = "Shared RAM address"
type = hexadecimal
range = A000 - F000
step = 400
optional = yes
editable = yes
virtual = no
help = "This parameter specifies the physical location of the adapter in the
memory of the computer. The specified location must not conflict with that
of any other adapter installed in the workstation or with an address
that is used by an expanded-memory manager. The value entered must be
a hexadecimal number between A000 and F000 and must be a multiple of 400.
The default addresses are X'D800' for the primary adapter and X'C800'
for the alternate adapter."
[MAXTRANSMITS]
display = "Maximum number of queued transmits"
type = decimal
default = 6
range = 6 - 50
optional = yes
editable = yes
virtual = no
help = "This parameter specifies the maximum number of transmit-queue entries
for the adapter driver. For a server or gateway workstation, set
this parameter to the result of multiplying the Maximum Transmits
Outstanding parameter by the Maximum Sessions parameter
(these are NETBIOS parameters).
The value must be a decimal number between 6 and 50. The default is 6."
[RECVBUFS]
display = "Number of receive buffers"
type = decimal
default = 2
range = 2 - 60
optional = yes
editable = yes
virtual = no
help = "This parameter specifies the minimum number of receive buffers to be
configured in the memory of the adapter. Any memory left on the adapter
after other storage requirements have been satisfied will be configured
as additional receive buffers. If you specify too many buffers, the
adapter will not open. The value must be a decimal number
between 2 and 60. The default is 2."
[RECVBUFSIZE]
display = "Receive buffer size"
type = decimal
default = 256
range = 256 - 2040
step = 8
optional = yes
editable = yes
virtual = no
help = "This parameter specifies the length of the data portion of each
receive buffer in the memory of the adapter. The value must be a decimal
number between 256 and 2040 and must be divisible by 8. The default is 256."
[XMITBUFS]
display = "Number of transmit buffers"
type = decimal
default = 1
range = 1 - 16
optional = yes
editable = yes
virtual = no
help = "This parameter specifies the number of transmit buffers to be
configured in the memory of the adapter. Configuring a second transmit buffer
may improve transmission performance, but it reduces the amount of memory
available for storing received frames. The value must be a decimal
number between 1 and 16. The default is 1."
[XMITBUFSIZE]
display = "Transmit buffer size"
type = decimal
default = 2040
range = 256 - 17952
step = 8
optional = yes
editable = yes
virtual = no
help = "This parameter specifies the length of the transmit buffers in the
memory of the adapter. Set the value as follows:
Token-Ring Network Adapter (8KB memory)...............2080
Token-Ring Network Adapter II (16KB memory)...........2080
Token-Ring Network Adapter/A (16KB memory)............2080
Token-Ring Network 16/4 and 16/4 Adapter/A (64KB memory)
- If the ring speed is 4Mbps .........................4096
- If the ring speed is 16Mbps........................17952
If the value is set too high, the adapter will not open.
The value must be a decimal number between 256 and 17952 and must
be divisible by 8. The default is 2080."
[ALTERNATE]
display = "Alternate adapter"
type = none
default = no
set = yes,no
optional = yes
editable = yes
virtual = no
help = "If two IBM Token-Ring Network Adapters are installed in the
workstation, this parameter identifies the second adapter.
If you have only one adapter or are configuring for the first
adapter, use the default value of 'NO'.
Set this parameter to 'YES' if you are configuring for the second
adapter."
[NETADDRESS]
TAG = netaddress
DISPLAY = "Locally administered address"
TYPE = hexString
STRLENGTH = 12
range = 400000000000-7FFFFFFFFFFF
SCOPE = local
optional = yes
editable = yes
virtual = no
help = "This parameter overrides the network address of the network
adapter card. The value of this parameter is a hexadecimal string of
12 digits, such as '400001020304' (without the quotes), with a range from
400000000000 to 7FFFFFFFFFFF. The address must be unique among all
other network adapter addresses on the network.
Specify the network adapter address in IBM Token-Ring Network format."