home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
OS/2 Shareware BBS: 27 Fixes20
/
27-Fixes20.zip
/
xr0p002.txt
< prev
next >
Wrap
Text File
|
1995-08-06
|
3KB
|
81 lines
***************** FIXPAK FOR IBM OS/2 CSD LEVEL XR06200 *********************
IMPORTANT
---------
PLEASE READ THE FOLLOWING TERMS AND CONDITIONS. DOWNLOADING
THE SERVICE FIX THAT FOLLOWS, INDICATES YOUR ACCEPTANCE OF THE
FOLLOWING TERMS AND CONDITIONS:
- YOU MUST BE, AND YOU AGREE THAT YOU ARE, A PRIOR LICENSEE OF OS/2
VERSION 2.11
- YOU MAY MAKE COPIES OF THE OS/2 VERSION 2.11 SERVICE FIX EQUAL TO
THE NUMBER OF LICENSED COPIES OF OS/2 VERSION 2.11 YOU POSSESS
- YOU MAY ONLY USE THIS SERVICE FIX FOR MAINTENANCE PURPOSES
- ALL OTHER TERMS AND CONDITIONS OF YOUR OS/2 VERSION 2.11 LICENSE
AGREEMENT APPLY TO THIS SERVICE FIX; HOWEVER, THIS DOES NOT EXTEND ANY
WARRANTY OUTLINED IN SUCH AGREEMENT.
*****************************************************************************
***************************************
OS/2 2.11 FIXPAK = XR0P002
CORRECTIVE SERVICE LEVEL(CSD) = XR06200
***************************************
BUILD LEVEL 6.659
-----------------
AFFECTED MODULE(s):
------------------
LASERJET.DRV
GENERIC.DLL
HP_ADDF.DLL
PCLHELP.HLP
APAR(s) FIXED:
-------------
APAR= PJ14240
HOST PRINTING THROUGH COMMUNICATIONS MANAGER/2 USING HP LASERJET
SERIES II, FIRST LINE WILL NOT PRINT OR WILL PRINT HALF OF LINE
APAR= PJ12350
THE HP LASERJET, THE TIMES NEW FONT LETTERS OVERLAPP OR EXTRA
SPACES ARE ADDED IN BETWEEN LETTERS WHEN PRINTING FROM 123G
APAR= PJ12360
PM PRINT WILL DEFAULT TO THE OPPOSITE CASSETTE ( TRAY ) SELECTED
WITH THE KYOCERA F-2000A/F-2200S PRINTER ( LASERJET .DRV )
APAR= PJ11724
PRINTING FROM CM/2 3270 USING THE HPIV LASERJET DRIVER CAUSES AN
EXTRA BLANK PAGE TO BE EJECTED.
*************************************************************************
To INSTALL this fix perform the following steps :
Use these printer drivers as you would your original printer driver
diskettes that were shipped with OS/2.
- Unpack printer driver with LOADDSKF to a directory on your system or
to a diskette
- Open the printer object(s) and deselect all drivers you have
acquired this fix for and select another driver file as default.
- Close the printer object.
- Reboot the system without letting any print jobs print.
- Open the printer object settings and printer driver and select
install from one of the driver objects.
- The "Install New Printer Driver" dialog will appear.
- Select "Other OS/2 Printer Driver" and enter the drive and/or
directory that you have put the driver files into for the install.
- Press Install button and a message box will appear asking if you
would like to replace the driver with the new level and select yes.
- Close the "Install New Printer Driver" dialog and select the correct
driver for the print object
- Close print object.
You will now be ready to print using the driver. If you need additional
help installing the printer driver, please refer to the on-line help
facility.
Note:
If you are in a network environment, we suggest that you match printer
driver levels between both the server and the requestors.