home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
OS/2 Shareware BBS: 17 Fixes30
/
17-Fixes30.zip
/
xr0p012.rm1
< prev
next >
Wrap
Text File
|
1996-05-08
|
6KB
|
170 lines
***************** OS/2 PRINT SUBSYSTEM PRINTER DRIVER *********************
***************** FIXPAK FOR OS/2 WARP v3.00 AND ABOVE *********************
IMPORTANT
---------
PLEASE READ THE FOLLOWING TERMS AND CONDITIONS. DOWNLOADING
THE SERVICE FIX THAT FOLLOWS, INDICATES YOUR ACCEPTANCE OF THE
FOLLOWING TERMS AND CONDITIONS:
- YOU MUST BE, AND YOU AGREE THAT YOU ARE, A PRIOR LICENSEE OF OS/2
WARP VERSION 3.00
- YOU MAY MAKE COPIES OF THE OS/2 WARP VERSION 3.00 SERVICE FIX EQUAL TO
THE NUMBER OF LICENSED COPIES OF OS/2 WARP VERSION 3.00 YOU POSSESS
- YOU MAY ONLY USE THIS SERVICE FIX FOR MAINTENANCE PURPOSES
- ALL OTHER TERMS AND CONDITIONS OF YOUR OS/2 WARP VERSION 3.00 LICENSE
AGREEMENT APPLY TO THIS SERVICE FIX; HOWEVER, THIS DOES NOT EXTEND ANY
WARRANTY OUTLINED IN SUCH AGREEMENT.
*****************************************************************************
Note: Because of a change maded in the laserjet driver, module BROKER.DLL is
no longer needed. After installing this fixpak, you may wish to delete this
module from your system.
*****************************************************************************
***************************************
OS/2 PRINTER FIXPAK = XR0P012
***************************************
PRNTR LEVEL 30.461
***************************************
AFFECTED MODULE(s):
***************************************
LASERJET.DRV
LASERJET.HLP
FONTS
***************************************
APAR(s) FIXED:
***************************************
*************************************************************************
Note: Some fixed APARs may NOT be listed below. If you received this
FixPak through the IBM OS/2 support channel and your requested
APAR(s) is/are NOT listed, please install this FixPak, your
requested APAR(s) is/are included.
*************************************************************************
APAR= PJ16528
FORM SIZES FOR CUSTOM FORMS CREATED FOR LASERJET.DRV ARE
INCORRECT IF MORE THAN ONE CUSTOM FORM IS CREATED.
APAR= PJ17063
LASERJET.DRV PRINTS AN INCORRECT HORIZONTAL LINE WHEN USING
ENVELOPES.
APAR= PJ17300
PRINTING WITH AMIPRO GIVES A BLANK OUTPUT AREA IN THE MIDDLE OF
THE PAGE IN WARP 3.0 LASERJET DRIVER
APAR= PJ17998
PRINTING ON LANDSCAPE AND LEGAL OPTIONS IN IBM WORKS USING HP
LASERJET SERIES II PRINTS A VERTICAL LINE NEXT TO EACH CHARECTER.
APAR= PJ18508
PRINTING TO A HPLJ 4 (VER 30.443) FROM CM/2 1.11 PRINTS A BLANK
SPACE ON EACH AND EVERY LINE AT TWO PLACES ON THE DOCUMENT.
APAR= PJ18633
PRINTING TO A HPLJ 4 (VER 30.443) FROM CM/2 1.11 PRINTS A BLANK
SPACE ON EACH AND EVERY LINE AT TWO PLACES ON THE DOCUMENT.
APAR= PJ18783
AFTER SETTING THE FORMS WITH DIFFERENT OPTIONS FOR THE LASERJET
DRIVER, THE PRINT OUT COMES OUT ON PLAIN PAPER INSTEAD OF ENVELOPE.
APAR= PJ17901
PRINTING TO FILE AND THEN PERFORMING DRAG AND DROP CAUSES EXTRA
SHEETS OF PAPER BEFORE AND AFTER DOCUMENT ON HP LASERJET IIP.
APAR= PJ18996
WRONG OUTPUT WHEN USING LASERJET.DRV VER. 3.0.444
APAR= PJ19006
NOT PRINTING ON THE CORRECT FORM AFTER DEFINING THE FORMS WITH
LASERJET DRIVER.
APAR= PJ19228
WRONG OUTPUT WHEN USING LASERJET.DRV VER. 3.0.444
APAR= PJ19863
MIGRATING TO WARP FROM OS/2 2.11, THE LASERJET PRINTER PROPERTIES
HAVE CHANGED.
APAR= PJ19971
BLANK COLUMNS WHEN PRINTING FROM HP LASERJET 4P USING DRIVER VER
LASERJET.DRV VER 30.452.
APAR= PJ20078
PANASONIC KX-P4450 PRINTER PRINTS IN ENVELOPE SIZED AREA IF THE
PRINTER IS BOOTED WITH THE ENVELOPE TRAY INSTALLED.
APAR= PJ20648
STARWRITER FOR OS/2 VERSION 2.0 AND LASERJET.DRV FROM WARP.
YOU GET BIG SPOOLFILE.
APAR= PJ20661
AFTER APPLYING FIXPACK XR0P012.DSK FOR LASERJET, PRINTING FROM A
COMMAND LINE DOES NOT PRINT THE FIRST LINE OF THE DOCUMENT.
APAR= PJ20779
SYS3175 IN PMMERGE WHEN USING THE HPLASETJET DRIVER AND CALLING
THE GPICHARSTRINGAT API.
APAR= PJ21126
LASERJET.DRV FROM XR0P012 CORRUPT PRINT ON HP4 AND HP4M PRINTERS
APAR= PJ21163
WRONG OUTPUT WHEN USING LASERJET.DRV VER. 30.456.
APAR= PJ21260
"GIRAFFE" PATTERN PRINT PROBLEM LASERJET.DRV 30.456.
APAR= PJ21418
HP III DRIVER PRINTOUT CORRUPTION WHEN PRINTING DARK BACKGROUND
WINDOW IN A4 PAPER FORMAT.
APAR= PJ21735
LASERJET DRIVER NOT ALLOWS SELECTION OF THE A3 FORM FOR PRINTER
KYOCERA FS.6500.
APAR= PJ21887
LASERJET DRIVER WILL SKIP (AND NOT PRINT) A BLANK PAGE IN A
DOCUMENT IN AMIPRO AND IBMWORKS.
APAR= PJ21951
PRINTING TEXT FROM MS PMWORD IN 300 DPI USING CG TMS RMN FONT,
SIZE 10 , LASERJET.DRV DRIVER AND HP 4 GIVES OVERLAPPED CHARACT.
*************************************************************************
To INSTALL this fix perform the following steps :
Use these printer drivers as you would your original printer driver
diskettes that were shipped with OS/2.
- Unpack printer driver with LOADDSKF to a directory on your system or
to a diskette
- Open the printer object(s) and deselect all drivers you have
acquired this fix for and select another driver file as default.
- Close the printer object.
- Reboot the system without letting any print jobs print.
- Open the printer object settings and printer driver and select
install from one of the driver objects.
- The "Install New Printer Driver" dialog will appear.
- Select "Other OS/2 Printer Driver" and enter the drive and/or
directory that you have put the driver files into for the install.
- Press Install button and a message box will appear asking if you
would like to replace the driver with the new level and select yes.
- Close the "Install New Printer Driver" dialog and select the correct
driver for the print object
- Close print object.
You will now be ready to print using the driver. If you need additional
help installing the printer driver, please refer to the on-line help
facility.
Note:
If you are in a network environment, we suggest that you match printer
driver levels between both the server and the requestors.