home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
OS/2 Shareware BBS: 17 Fixes30
/
17-Fixes30.zip
/
wfp_01.zip
/
XR_WPK1.DSK
/
README.1ST
< prev
Wrap
Text File
|
1994-11-15
|
3KB
|
89 lines
*********** OS/2 FIXPAK FOR OS/2 Warp Version 3.0 ***********
IMPORTANT
PLEASE READ THE FOLLOWING TERMS AND CONDITIONS. DOWNLOADING
THE SERVICE FIX THAT FOLLOWS, INDICATES YOUR ACCEPTANCE OF
THE FOLLOWING TERMS AND CONDITIONS:
- YOU MUST BE, AND YOU AGREE THAT YOU ARE, A PRIOR LICENSEE
OF OS/2 WARP VERSION 3.0
- YOU MAY MAKE COPIES OF THE OS/2 WARP VERSION 3.0 SERVICE
FIX EQUAL TO THE NUMBER OF LICENSED COPIES OF OS/2 WARP
VERSION 3.0 YOU POSSESS
- YOU MAY ONLY USE THIS SERVICE FIX FOR MAINTENANCE PUR-
POSES
- ALL OTHER TERMS AND CONDITIONS OF YOUR OS/2 WARP VERSION
3.0 LICENSE AGREEMENT APPLY TO THIS SERVICE FIX; HOWEVER,
THIS DOES NOT EXTEND ANY WARRANTY OUTLINED IN SUCH
AGREEMENT.
*************************************************************
Note: You will need the OS/2 Warp FixPak installation disks
- WARPBDSK #1 and WARPBDSK #2 - to install this FixPak.
*************************************************************
***************************************
OS/2 2.11 FIXPAK = XR_WPK1
CORRECTIVE SERVICE LEVEL(CSD) = XR03000
***************************************
AFFECTED MODULE(s):
***************************************
COM.SYS
***************************************
APAR(s) FIXED:
***************************************
APAR= PJ15906
CUSTOMER IS UNABLE TO ACCESS PCMCIA MODEM ON AN IBM THINKPAD 720
(THE MODE COMMAND RETURNS AN ERROR).
Note: Some fixed APARs may NOT be listed above. If you received this
FixPak through the IBM OS/2 support channel and your requested
APAR(s) is/are NOT listed, please install this FixPak, your
requested APAR(s) is/are included.
*************************************************************************
*************************************************************************
To INSTALL this fix perform the following steps :
1. Insert WARPBDSK #1 in drive A
2. Open an OS/2 window or Full Screen
3. [C:\]Enter a:\service ; press the enter key
4. Follow displayed instructions
Note: When prompted, do the following for ARCHIVE specification:
5. Enter the path where a copy of replaced module(s) will be stored
in the ARCHIVE directory. Ex. D:\ARCHIVE.
6. Click on "OK"
Note: A "Reboot" could be required at this point. If so, follow instructions
displayed. If a "Reboot" is NOT required, then do;
7. Select NO for redisplay of "Product List" when displayed
8. Close the CSF window
9. Shut down and reboot your system.
***********************************************************************
Note 1: To view the Corrective Service Facility documentation do:
1. Insert WARPBDSK #1 in drive A
2. [C:\]Enter E a:readme.csf
Note 2: To print the Corrective Service Facility documentation do:
1. Insert diskette #1 in drive A
2. [C:\]Enter print a:readme.csf