home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
OS/2 Shareware BBS: 17 Fixes30
/
17-Fixes30.zip
/
hebwfw5.zip
/
README.1ST
< prev
next >
Wrap
Text File
|
1995-03-02
|
6KB
|
124 lines
OS/2 Warp For Windows: Update Installation Diskettes for XR0W005
03/02/95
This utility can be used to refresh your Warp 3.0 (for Windows)
Installation diskettes #0 and #1 with some of the Fixpack XR0W005 files.
It will work for either a Warp diskette-based or CDROM-based install.
Backup your original OS/2 Warp Installation Diskette #0 and diskette #1
before running this utility. Use the backup copy when running this utility.
This utility handles 3.5" and 5.25" installation diskettes. If you are
using 5.25" diskettes, free diskette space is very limited. Be sure to
delete any lines beginning with 'REM ' in CONFIG.SYS on the second 5.25"
diskette to conserve space BEFORE running this utility.
You should unpack WFWIN5.ZIP into a directory by itself using
the PKUNZIP.EXE utility. Total space required for WFWIN5.ZIP and the
un-zipped files is about 2.4 MB.
You may run this utility either from native DOS, or from Warp OS/2.
To run this utility from PC-DOS or MS-DOS,
1. Change your directory to the directory containing the unzipped files.
2. Type
UPDINST C: A:
where C: is the drive where the unzipped files reside, and
A: is the diskette drive where you will be inserting
the OS/2 Install diskette #0 and #1 that you want
to have updated.
To run this utility from Warp OS/2,
1. Start an OS/2 Fullscreen or Windowed session.
2. Change your directory to the directory containing the unzipped files.
3. Type
UPDINST C: A:
where C: is the drive where the unzipped files reside, and
A: is the diskette drive where you will be inserting
the OS/2 Install diskette #0 and #1 that you want
to have updated.
Please note:
This update utility should not be run for Warp "Fullpack" Install
Diskettes.
This utility ONLY updates your Warp Install diskettes #0 and #1.
It does not update Warp on your hard disk.
If you run this utility multiple times against the same set of Install
diskettes, you will need to edit CONFIG.SYS and remove duplicate
lines that contain SET COPYFROMFLOPPY=1. This will conserve
valuable diskette freespace.
When you have completed the update of your Warp Installation diskettes
#0 and #1 with this utility:
1. If Warp is not installed on your hard disk, then
proceed with the complete Warp Install process.
This will install the *original* OS/2 Warp onto
your hard disk.
2. When installation of OS/2 Warp is completed, you
should update Warp on your hard disk with the
full XR0W005 Corrective Service. Obtain the
Warp fixpack "WFP_05" (3 diskettes) and the
"kicker" diskettes "WKICKR" (2 diskettes).
The "kicker" diskettes are known as the
"Corrective Service Facility diskettes" and are
used to perform the actual installation of XR0W005.
To proceed with the Installation of OS/2 Warp,
shutdown your system and reboot with Warp Installation
diskette #0 in your diskette drive.
If Warp is already installed on your hard drive,
then apply the XR0W005 Corrective Service (if not
already completed).
Below is a list of files that will be replaced on the diskettes.
Note that this is a list of files that are expected to be already
on the diskettes. Files listed below with '*' will not be updated
if not present, regardless of diskette type. Also, files listed
below with '*' will be updated if present, even if they are not
expected to be on the diskette (shown as 'N/A').
3.5" 5.25" 3.5" 5.25"
diskette-based diskette-based CDROM-based CDROM-based
Diskette 0:
OS2DUMP X X X X
OS2KRNLI X X X X
OS2LDR X X X X
RESERVE.SYS X X X X
Diskette 1:
* AHA152X.ADD N/A N/A X X
* AHA164Z.ADD N/A N/A X X
* AIC7870.ADD N/A N/A X X
* BTSCSI.ADD N/A N/A X X
DOSCALL1.DLL X X X X
* HPFS.IFS X X X N/A
IBM1FLPY.ADD X X X X
IBM1S506.ADD X X X X
* IBM2FLPY.ADD X X X N/A
* IBM2SCSI.ADD X X X N/A
* IBMIDECD.FLT N/A N/A X X
* MITFX001.ADD N/A N/A X X
* OS2DASD.DMD X X X X
* PRINT01.SYS X X X N/A
* PRINT02.SYS X X X N/A
* SBCD2.ADD N/A N/A X X
SESMGR.DLL X X X X
* SONY31A.ADD N/A N/A X X
CONFIG.SYS ('SET COPYFROMFLOPPY=1' added to end of file)