home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
OS/2 Shareware BBS: 14 Text
/
14-Text.zip
/
landisgu.zip
/
A3T12MST.INF
(
.txt
)
Wrap
OS/2 Help File
|
1999-04-07
|
1MB
|
16,506 lines
ΓòÉΓòÉΓòÉ 1. About This Book ΓòÉΓòÉΓòÉ
This book supports IBM Enhanced Remote Access Connection Server for OS/2 Warp
Server. The book describes how to set up and use the connection server in your
network environment. Throughout the book, IBM Enhanced Remote Access
Connection Server for OS/2 Warp Server is described using different terms, such
as LAN Distance Connection Server, connection server, LAN Distance, and so on.
This book provides installation, setup, and management information for the
connection server. The online book LAN Distance Remote Guide provides
information about LAN Distance remote workstations. The LAN Distance Advanced
Guide is an advanced configuration guide and supplements the information
provided in the Remote Guide. For more details about remote workstations, use
the LAN Distance Remote Guide instead.
Note: Some product features are not supported, or not fully supported, for
the MS Windows version. For more information, see information about the LAN
Distance Remote Product for MS Windows in the LAN Distance Remote Guide online
book.
ΓòÉΓòÉΓòÉ 1.1. Who Should Use This Book ΓòÉΓòÉΓòÉ
This book is intended for LAN Distance administrators who will install, set up
and manage LAN Distance Connection Server and LAN Distance Remote workstations
to provide remote access to LAN resources.
This book assumes the LAN Distance administrator is familiar with networking
concepts and terms, communications hardware, and with the network operating
system and LAN applications used in their network.
ΓòÉΓòÉΓòÉ 1.2. How This Book Is Organized ΓòÉΓòÉΓòÉ
This book includes the following chapters and appendixes:
Introducing the Product highlights the features of the LAN Distance
product and describes the remote access environments it enables.
Setting Up the Product in Your LAN Environment describes the workstations
and resources in your LAN Distance wide area network and identifies some
planning considerations. Key differences between the MS Windows and OS/2
versions of the LAN Distance Remote product are also listed.
Quick Start lists required tasks for setting up your LAN Distance
Connection Server. It also describes required tasks for configuring a
LAN Distance Remote using the Settings notebook instead of Basic
Settings.
Installing the Product explains how to install a LAN Distance Connection
Server and choose an installation method for your LAN Distance
workstations.
Understanding the User Interface introduces you to the LAN Distance
Workstations window and its objects and actions.
Setting Up Ports and Modems explains how to configure the LAN Distance
product to use your modems and WAN adapters.
Setting Up the LAN Distance Bridge covers setting up the LAN Distance
bridge component for Token-Ring and Ethernet LANs and explains the
product's automatic and customized filtering options for improving
performance of the LAN Distance connection.
Setting Up Point-to-Point Protocol (PPP) describes the tasks you must
complete to set up point-to-point protocol (PPP) for LAN Distance.
Setting Up LAN Distance Security describes the security features of the
LAN Distance product and explains how to customize a security policy for
your LAN Distance system.
Setting Up to Run LAN Applications Remotely provides setup tips for
running your LAN applications remotely and describes protocol support
provided for OS/2.
Setting Up Some Popular LAN Applications describes setup steps and
configuration changes recommended for running some LAN applications
remotely.
Setting Up the Phone Book describes how to set up phone book entries for
the workstations that you want to call.
Dialing and Running LAN Applications describes how to establish a LAN
Distance connection and start your LAN applications. Special setup for
LAN-to-LAN connections and dialing out using the Dial Request applet are
also covered.
Answering Incoming Calls explains how to setup answer modes so your LAN
Distance workstation can answer calls.
Troubleshooting Tips provides steps for correcting some common problems.
Using System Management Tools describes the tools you can use to manage
your LAN Distance wide area network.
Detecting and Resolving Errors directs you to resources and procedures
for resolving problems.
Supported Hardware lists the modems and adapters that you can use with
the LAN Distance product. Special setup for Ethernet adapters is also
provided.
Command Line Interface Reference is a guide to the LAN Distance command
line interface. In addition to syntax information for LAN Distance
commands, this appendix includes example batch procedures.
Using OS2PING for Troubleshooting and LAN Distance Bridge Configuration
explains how to use OS2PING and LANPING to verify a communication path
and select LAN Distance bridge configuration values.
Modifying Modem Strings in a LAN Distance PIF File explains how to create
a new PIF file (modem type) by editing an existing PIF file, other
modifications to PIF files are also described. Additionally, the
Port/Modem utility, another option for creating modem types, is also
documented.
Creating a Co-Processor Parameter File explains how to create a
co-processor parameter file if you are setting up an ARTIC card that uses
non-micro channel (AT bus) hardware.
Example System Configuration Files contains samples of LAN Distance
configuration files and system configuration files.
Security Database Tools provides a discussion of security database tools.
Developing Security User Exits describes the development of user exits.
ΓòÉΓòÉΓòÉ 1.2.1. Highlighting Conventions ΓòÉΓòÉΓòÉ
Throughout this book, the following highlighting conventions are used:
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Table 1. Highlighting Conventions Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé HIGHLIGHTING Γöé USED TO IDENTIFY Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé BOLD Γöé Controls (when used in procedures), for Γöé
Γöé Γöé example: Γöé
Γöé Γöé Γöé
Γöé Γöé o Menu bar choices Γöé
Γöé Γöé o Radio buttons Γöé
Γöé Γöé o Push buttons Γöé
Γöé Γöé o List boxes Γöé
Γöé Γöé o Check boxes Γöé
Γöé Γöé o Entry fields Γöé
Γöé Γöé o Read-only entry fields Γöé
Γöé Γöé o Tab names Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé CAPITAL LETTERS Γöé o Commands Γöé
Γöé Γöé o Directory names Γöé
Γöé Γöé o File names Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Italics Γöé o Book and diskette names Γöé
Γöé Γöé o Variable names and values Γöé
Γöé Γöé o Technical terms when introduced Γöé
Γöé Γöé o Words of emphasis Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé "Monospace" Γöé o Coding examples Γöé
Γöé Γöé o Special characters Γöé
Γöé Γöé o Text reader must type Γöé
Γöé Γöé o Text displayed on the computer screen Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓòÉΓòÉΓòÉ 1.3. LAN Distance Library ΓòÉΓòÉΓòÉ
Documentation for the LAN Distance product includes books, online information,
and product information supplied in README files.
ΓòÉΓòÉΓòÉ 1.3.1. Books ΓòÉΓòÉΓòÉ
If you are setting up LAN Distance Remotes, you will need the LAN Distance
Remote Guide.
ΓòÉΓòÉΓòÉ 1.3.2. Online Information ΓòÉΓòÉΓòÉ
This book is designed to be used with the online information provided in the
Helps, Task Index and the Where & How.
Helps
Online help is an important component of the LAN Distance product
documentation. General help for windows and specific help for fields is
available when you select the Help push button from any window.
Task Index
The online task index is a comprehensive index of LAN Distance tasks. To
access the task index:
From the LAN Distance Workstations window, select Help from the menu
bar and Help index from the pull-down menu.
From any window, select the Help push button, then select the Index
push button.
Where & How Online Information
This online document identifies where you can complete configuration
information tasks in the LAN Distance Settings notebook and describes how
to modify your existing configuration through the Settings notebook.
README Files
The following README files are shipped with the LAN Distance product:
README file
This file contains updated technical information that you may need
to configure and use the LAN Distance Connection Server product.
To access the README file, before the product is installed, insert
Diskette 1. From an OS/2 command prompt, type A:TYPE README |
MORE, then press Enter. To print the README file type A:PRINT
README, then press Enter.
DSI_API.TXT
The dialer services interface (DSI) is an application program
interface (API) for the dialer services component of the LAN
Distance product.
README.X25
The LAN Distance product supports access to X.25 networks through
asynchronous modems with X.25 Packet Assembler Disassembler (PAD)
capabilities.
The READMEX25 file contains information you need to configure and
use X.25 PAD capabilities with the LAN Distance product.
Note: After installation, these files are installed in the WAL subdirectory.
ΓòÉΓòÉΓòÉ 1.4. Related Publications ΓòÉΓòÉΓòÉ
The following books may provide information helpful to setting up this product
or the applications you plan to use with this product:
Automated Installation for CID Enabled Extended Services, LAN Server V3.O
and Network Transportation Services/2
FFST/2 Administration Guide
IBM LAN Distance Configuration and Customization Guide
IBM LAN Technical Reference
IBM Token-Ring Network Architecture Reference
Multi-Protocol Transport Services Configuration Guide
LAN Support Program User's Guide
OS/2 LAN Server Network Administrator Reference, Volumes 2 and 3
Realtime Interface Co-Processor OS/2 Support Version 1.03 User's Guide
Supplement to LAN Technical Reference
Supplement to LAN Technical Reference (T-R 16/4 Adapter II)
TCP/IP OS/2 User's Guide
TCP/IP Installation and Maintenance Guide
The following Internic Standards and RFCs relate to point-to-point protocol
(PPP):
STD0051 The Point-to-Point Protocol (PPP)-obsoletes RFC1549, RFC1661, and
RFC1662
RFC1332 PPP IP Control Protocol (IPCP)
RFC1334 PPP Authentication Protocols (PAP and CHAP)
RFC1541 Dynamic Host Configuration Protocol (DHCP)
RFC1570 PPP Link Control Protocol (LCP) extensions
ΓòÉΓòÉΓòÉ 2. Introducing the Product ΓòÉΓòÉΓòÉ
This chapter introduces LAN Distance and explains the types of remote LAN
access environments that are supported.
Remote-to-LAN is probably the most common type of remote access. Stand-alone
LAN Distance remotes and PPP clients establish a connection by dialing a LAN
Distance Connection Server on a remote LAN. The LAN Distance connection allows
a LAN Distance remote or PPP client to access LAN application servers, host
gateways, printers and LAN workstations, just as though the LAN Distance Remote
or PPP client was a local node on the LAN.
The connection environments the LAN Distance product supports are explained in
LAN Distance Environments.
The following picture illustrates how you can set up LAN Distance Connection
Servers and LAN Distance Remotes in your environment to provide remote LAN
access.
Remote LAN Access Environments for the LAN Distance Product
ΓòÉΓòÉΓòÉ 2.1. Supported Communications Connections ΓòÉΓòÉΓòÉ
The LAN Distance product supports asynchronous, synchronous, ISDN and X.25
communications connections for remote LAN access environments.
For asynchronous communications using your workstation's COM port,
support is provided for many manufacturer's external modems, as well as
internal modems. Additionally, several asynchronous adapters, including
IBM's Dual Asynchronous and Wide Area Connector, are supported. See
Supported Hardware for a list of the asynchronous WAN hardware the LAN
Distance product supports.
Synchronous modems require the use of an adapter that supports
synchronous communications. See Supported Hardware for a list of the
synchronous WAN hardware (modems and adapters) supported. Several of the
asynchronous modems listed in Modems also support synchronous
communications as a configuration option. Setup considerations for
synchronous modems are described in Using Synchronous Modems and Leased
Lines.
ISDN basic rate and ISDN primary rate switched communications are
supported using the ISDN adapters in Wide Area Network Adapters.
The LAN Distance product supports access to X.25 networks through
asynchronous modems with X.25 Packet Assembler (PAD) capabilities. To
access the READMEX25 file, see Online Information.
ΓòÉΓòÉΓòÉ 2.2. LAN Distance Environments ΓòÉΓòÉΓòÉ
The LAN Distance product supports three types of remote LAN access
environments:
Remote-to-Remote
Remote-to-LAN
LAN-to-LAN
ΓòÉΓòÉΓòÉ 2.2.1. Remote-to-Remote ΓòÉΓòÉΓòÉ
Two LAN Distance Remotes can establish a LAN Distance connection as shown in
Remote-to-Remote Environment to form a virtual LAN. The remote-to-remote
environment is a simple, low-cost solution for stand-alone workstations that
require direct access to resources on other stand-alone workstations. For
example, the remote-to-remote environment can be used in a local office
environment in lieu of expensive LAN cabling or by traveling employees who need
access to their office workstations.
Remote-to-Remote Environment
ΓòÉΓòÉΓòÉ 2.2.1.1. Hardware Considerations ΓòÉΓòÉΓòÉ
Both LAN Distance Remotes must use compatible communications hardware to
establish a LAN Distance connection. For example, to establish an asynchronous
connection, the LAN Distance Remotes must have a COM port and modem, or an
adapter and modem combination that support and are set up for asynchronous
communications.
You can set up more than two LAN Distance Remotes to share resources in the
remote-to-remote environment. Each OS/2 LAN Distance Remote supports two
concurrent connections. MS Windows LAN Distance Remotes support one
asynchronous connection.
ΓòÉΓòÉΓòÉ 2.2.1.2. Software Considerations ΓòÉΓòÉΓòÉ
With the appropriate software, stand-alone LAN Distance Remotes can use a LAN
Distance connection to conference or to share data and local resources, such as
printers.
For example, using a peer networking product, such as IBM OS/2 LAN Server 3.0
peer services or LANtastic (for MS Windows workstations), LAN Distance Remotes
can share access to files and local resources. Using a desktop conferencing
product, such as OS/2 Person to Person/2, LAN Distance Remotes can conference
electronically.
Client/server applications can also be used in the remote-to-remote
environment. For example, a LAN Server application such as Time and Place/2 or
Lotus Notes can be used in the remote-to-remote environment by setting up one
LAN Distance Remote as the server, and one as the client.
ΓòÉΓòÉΓòÉ 2.2.1.3. Setting Up the LAN Distance Connection Server as a Stand-Alone Workstation ΓòÉΓòÉΓòÉ
As shown in Stand-Alone Server in Remote-to-Remote Environment, the LAN
Distance Connection Server product can be installed on a stand-alone
workstation to support more than two concurrent LAN Distance connections. This
set up is useful if a number of users on stand-alone workstations need to
access resources on a single server. For example, install LAN Server on a
stand-alone LAN Distance Remote that you want to use as the server. (No LAN
hardware is required for the LAN Server). A LAN Distance Remote running OS/2
LAN Requester or a MS Windows LAN Distance Remote running DOS LAN Requester can
dial the stand-alone LAN Server and access resources as though they were on a
local LAN.
Stand-Alone Server in Remote-to-Remote Environment
ΓòÉΓòÉΓòÉ 2.2.2. Remote-to-LAN ΓòÉΓòÉΓòÉ
A LAN Distance remote workstation or PPP client can establish a LAN Distance
connection to a LAN Distance Connection Server on the LAN as shown in
Remote-to-LAN Environment. The LAN Distance remote workstation or PPP client
functions as a remote node on the LAN. The LAN Distance connection provides
access to all LAN workstations and resources, allowing the LAN Distance remote
workstation or PPP client to access resources as though it were physically
connected to the LAN.
The remote-to-LAN environment is a flexible solution for users requiring access
to resources from remote locations, such as home or while traveling. Users can
dial the LAN Distance Connection Server on their office LAN and run the same
applications remotely that they use in the office.
Remote-to-LAN Environment
ΓòÉΓòÉΓòÉ 2.2.2.1. Hardware Considerations ΓòÉΓòÉΓòÉ
The LAN Distance Connection Server must have a supported Token-Ring or Ethernet
LAN adapter to provide remote access to the LAN. See Local Area Network
Adapters for a list of supported LAN adapters.
The LAN Distance Connection Server requires communications hardware for the
type of communications connections (asynchronous, synchronous and ISDN) and the
number of concurrent LAN Distance connections that you want to support.
The LAN Distance Remote does not require LAN hardware to connect to a LAN
Distance Connection Server and access LAN resources. LAN Distance Remotes do
require communications hardware, such as a modem and COM port or an adapter to
establish a connection with the LAN Distance Connection Server.
ΓòÉΓòÉΓòÉ 2.2.2.2. Software Considerations ΓòÉΓòÉΓòÉ
The LAN Distance Connection Server only requires OS/2 version 2.0 (or later),
it does not require any communications software (e.g. Communications Manager or
LAN Requester) to support a LAN Distance connection.
Over the LAN Distance connection, LAN Distance Remotes can run LAN applications
and networking software that use industry-standard NDIS-compliant protocols,
such as NetBIOS, IEEE 802.2, IPX, and TCP/IP. PPP clients can run LAN
applications and networking software that use TCP/IP. See Examples of
Supported LAN Protocols and Applications.
ΓòÉΓòÉΓòÉ 2.2.3. LAN-to-LAN Environments ΓòÉΓòÉΓòÉ
You can establish a LAN Distance connection between two LAN Distance Connection
Servers to form a casual bridge between two LANs as shown in LAN-to-LAN
Environments. LAN workstations on LAN A can use the LAN Distance connection to
access LAN resources on LAN B as though they were physically attached to LAN A.
Similarly, LAN workstations on LAN B can access resources on LAN A.
LAN-to-LAN Environments
Evaluate the following planning and setup considerations for the LAN-to-LAN
environment:
ΓòÉΓòÉΓòÉ 2.2.3.1. LAN Size ΓòÉΓòÉΓòÉ
The LAN-to-LAN environment is designed to allow a limited number of
workstations on a LAN to communicate with a limited number of workstations on
another LAN.
Connecting LANs with a large number (20 +) of workstations is recommended only
if the number of workstations that access the LAN Distance connection can be
limited to a small number (1 - 20). See Filtering Strategies for the
LAN-to-LAN Environment.
ΓòÉΓòÉΓòÉ 2.2.3.2. LAN Topology ΓòÉΓòÉΓòÉ
Consider the topology of the LANs you are connecting using the LAN Distance
product:
Do not use the LAN Distance product to establish a LAN-to-LAN connection
between two LANs if any type of connection or a bridge already exists
between the two LANs.
If the two LANs are connected to other LANs, workstations on the other
LANs could also access the LAN Distance connection. Customized filtering
criteria can be used to limit access to only the LAN workstations that
require access to the LAN Distance connection. See Customizing Filtering
Criteria.
ΓòÉΓòÉΓòÉ 2.2.3.3. Maximum Number of LAN Workstations ΓòÉΓòÉΓòÉ
If several LAN workstations in your environment require simultaneous access to
the LAN-to-LAN connection, the performance of the LAN-to-LAN connection will
vary based on:
The type of communications connection, the connection speed, and the
connection throughput
The workload of the LAN workstations using the connection
For example, if you use a modem that supports a connection speed of 38400 bps,
up to five LAN workstations with average usage requirements may expect average
response times. But if you use a 64K ISDN D channel, up to 10 LAN
workstations with average usage requirements may expect average response
times.
ΓòÉΓòÉΓòÉ 2.2.3.4. Improving Performance Factors ΓòÉΓòÉΓòÉ
Performance factors--connection throughput, connection speed, data volume and
response times-- for the LAN Distance connection can be improved using the
customized filtering capabilities of the LAN Distance product. See Types of
Filtering Supported for the LAN Distance Bridge. Automatic filtering cannot be
used for LAN-to-LAN connections.
ΓòÉΓòÉΓòÉ 2.2.3.5. Setting Up LAN Workstations and LAN Distance Connection Servers ΓòÉΓòÉΓòÉ
If an OS/2 LAN workstation needs to establish a connection to a LAN Distance
Connection Server or LAN Distance Remote on a separate LAN, set up the LAN
workstation to use the LDMKCALL program, set up the dialing LAN Distance
Connection Server to use the LDACCEPT program, and set up the answering LAN
Distance Connection Server or LAN Distance Remote to answer calls. See Using
the Dial Request Applet for LAN Dial Out.
ΓòÉΓòÉΓòÉ 2.2.3.6. Coordinating Security ΓòÉΓòÉΓòÉ
If security is enabled on the dialing and answering LAN Distance Connection
Servers, coordinate the security setup (user IDs and passphrases) for the
workstations participating in the LAN-to-LAN environment. See Setting Up LAN
Distance Connection Servers to Establish a LAN-to-LAN Connection.
ΓòÉΓòÉΓòÉ 2.3. Point-to-Point Protocol (PPP) ΓòÉΓòÉΓòÉ
Point-to-point protocol (PPP) is a protocol that is used throughout the
networking industry as a standardized method for interconnecting a variety of
hosts, bridges, and routers from one or more vendors. The key features of the
LAN Distance PPP support are:
LAN Distance connection server dynamically accepts calls from PPP clients
whose LAN applications use the TCP/IP protocol. This is in addition to
accepting calls from LAN Distance remote clients.
LAN Distance connection server supports multiple sessions of up to 128
LAN Distance remote clients and PPP clients, in any combination. The
maximum number of concurrent PPP connections is 64. The maximum number of
concurrent LAN Distance remote clients is 128.
PPP supports password authentication protocol (PAP) and
challenge-handshake authentication protocol (CHAP) using an integrated
database.
PPP IP address administration can be done in a combination of three ways:
- Client-specified
- Listed on the LAN Distance connection server
- Allocated by Dynamic Host Configuration Protocol (DHCP) services
Optionally allows the DHCP server to use the LAN Distance user ID to
update the DNS server.
ΓòÉΓòÉΓòÉ 3. Setting Up the Product in Your LAN Environment ΓòÉΓòÉΓòÉ
This chapter describes set up considerations for the workstations and resources
in your LAN Distance environment, and identifies some planning considerations
for adding the LAN Distance product to your LAN environment.
ΓòÉΓòÉΓòÉ 3.1. What Is a LAN Distance Wide Area Network? ΓòÉΓòÉΓòÉ
Your LAN Distance wide area network (WAN) is comprised of LAN Distance
workstations, PPP clients, LAN workstations, and LAN resources. The
workstations and resources on the LAN can participate in the LAN Distance wide
area network if they are attached to a LAN where the LAN Distance Connection
Server makes them available to LAN Distance Remotes.
For example, when the LAN Distance Remote shown in the shaded region of LAN
Distance Wide Area Network dials into the LAN Distance Connection Server, this
LAN Distance Remote and the LAN workstations and resources on the LAN Distance
Connection Server's LAN become part of the LAN Distance wide-area network. As
other LAN Distance Remotes shown in LAN Distance Wide Area Network dial into
the LAN, they are also added to the LAN Distance wide area network.
The different types of workstations and resources in a LAN Distance wide area
network are described in the following topics.
LAN Distance Wide Area Network
ΓòÉΓòÉΓòÉ 3.1.1. LAN Distance Connection Server ΓòÉΓòÉΓòÉ
The LAN Distance Connection Server dials and answers calls to establish
connections, routes and filters data to bridge the LAN Distance remote
workstations and PPP clients to the LAN, prevents unauthorized access to
provide security for LAN resources, and performs other administrative functions
for the LAN Distance wide area network.
The LAN Distance Connection Server package is installed on workstations
running OS/2 version 2.0 (or later).
The LAN Distance Connection Server allows multiple remote workstations to
dial in concurrently and access LAN resources. The number of remote
workstations supported is determined by your workstation's processing
power, its communications adapter(s), and the version of the LAN Distance
Connection Server product.
Two versions of the IBM LAN Distance Connection Server product are
available: the LAN Distance Connection Server 8-Port product supports up
to eight concurrent connections, and the LAN Distance Connection Server
product supports more than eight.
ΓòÉΓòÉΓòÉ 3.1.2. The LAN Distance Remote for OS/2 Product ΓòÉΓòÉΓòÉ
The OS/2 version of the LAN Distance Remote product is installed on
stand-alone workstations running OS/2 version 2.0 (or later). Up to two
concurrent LAN Distance connections are supported.
LAN applications and networking software that use industry-standard
NDIS-compliant protocols, such as NetBIOS, IEEE 802.2, IPX, and TCP/IP
are supported.
LAN Distance Remotes do not require LAN hardware to use a LAN Distance
connection to access LAN resources. WAN communications hardware (such as
a modem and COM port or an adapter) is required for the type of
communications connection that you want to support.
If you want to use the same workstation on and off the LAN, the LAN
Distance Remote must have a LAN adapter installed. Users can use the
shuttle feature to switch between LAN-attached and stand-alone
configurations.
ΓòÉΓòÉΓòÉ 3.1.3. The LAN Distance Remote for MS Windows Product ΓòÉΓòÉΓòÉ
The features described in The LAN Distance Remote for OS/2 Product are also
supported for the MS Windows version of the LAN Distance Remote product.
Some key differences between the MS Windows and OS/2 versions of the product
are highlighted in the following list. Additional features that are not
supported or not fully supported for LAN Distance Remote for MS Windows product
are described in "The LAN Distance Remote Product for MS Windows" in LAN
Distance Remote Guide.
The version of the LAN Distance Remote product for MS Windows is
installed on stand-alone workstations running Microsoft Windows version
3.1 with DOS version 5.0 or later. The MS Windows LAN Distance Remote
supports one LAN Distance connection.
Only one asynchronous COM port connection (COM1 - COM4) is supported for
LAN Distance Remote MS Windows workstations. Multiport configuration and
ARTIC multiport adapters are supported only for the LAN Distance Remote
for OS/2 product.
The LAN Distance Remote for MS Windows product does not supply or install
LAN networking software. (NetBIOS is installed and configured.) If you
need to set up applications that require additional protocols, such as
802.2, you must separately install and configure these protocols. See
Protocol Support Provided for OS/2 and MS Windows LAN Distance Remotes.
ΓòÉΓòÉΓòÉ 3.1.4. Point-to-Point Protocol (PPP) Clients ΓòÉΓòÉΓòÉ
The following information pertains to point-to-point protocol (PPP) clients:
PPP clients can run LAN applications and networking software that use
TCP/IP.
PPP clients do not require LAN hardware to use a LAN Distance connection
in order to access LAN resources. WAN communications hardware, such as a
modem and COM port or an adapter, is required for the type of
communications connection you want to support.
LAN Distance connection server supports the following PPP clients:
- Microsoft Windows 95 Version 4.0 client
- IBM OS/2 Internet Dialer
- IBM 8235 DIALs Connect for Windows Version 4.1
- IBM 8235 DIALs for OS/2 Version 4.5.2 or IBM 8235 DIALs for OS/2
Version 4.03 client + patch
You can get the patch from the world wide web (WWW) at the following
URL. The patch is called "DIALs for OS/2 Version 4.03 patch 3" in
the 8235 Remote Access Server (Version 4.0) section.
http://www.networking.ibm.com/nes/nes8235.htm
- Microsoft Windows NT Version 4.0 client
The following restrictions apply to PPP support:
- Callback is not supported for PPP clients
- LAN Distance connection server does not support the ability to use
LAN Distance logical adapter network addresses with a PPP user
account. For more information, see Security for PPP Clients.
- You cannot change passphrases from the client. For more
information, see Security for PPP Clients.
- PPP clients cannot TCP/IP ping LAN Distance clients. LAN Distance
clients cannot TCP/IP ping PPP clients.
ΓòÉΓòÉΓòÉ 3.1.5. LAN Workstations ΓòÉΓòÉΓòÉ
When a LAN Distance Remote establishes a connection to a LAN Distance
Connection Server, all of the workstations and resources on the LAN Distance
Connection Server's LAN become part of the LAN Distance wide area network.
If you do not want to open up the workstations and resources on your LAN to
remote access, you can set up filtering criteria at the LAN Distance Connection
Server to control access to resources on the LAN.
If your LAN Distance Remotes will access applications on LAN workstations,
adjust the NetBIOS timers on the LAN workstation and, if necessary, modify its
applications to support remote access.
ΓòÉΓòÉΓòÉ 3.1.6. LAN Resources ΓòÉΓòÉΓòÉ
Resources on a LAN, such as printers, file servers, and host controllers, can
also be accessed by LAN Distance Remotes through the LAN Distance Connection
Server on the LAN. There are no set up requirements for these LAN resources.
ΓòÉΓòÉΓòÉ 3.2. Planning Considerations for Setting Up the LAN Distance Products ΓòÉΓòÉΓòÉ
Evaluate these planning considerations when you introduce the LAN Distance
product to your LAN environment:
Selecting the LAN workstation that you want to use as the LAN Distance
Connection Server
Setting up filtering at the LAN Distance Connection Server
Setting up the protocols on the LAN Distance Remote that you need to run
your LAN applications
Setting up your LAN applications for remote access
Setting up security at the LAN Distance Connection Server to control
unauthorized remote access
Setting up standard naming conventions to avoid duplicate LAN Distance
logical adapter network addresses
Setting up standard naming conventions to avoid duplicate NetBIOS names
Testing the LAN Distance product to verify that you can establish a LAN
Distance WAN connection
For information about security for point-to-point protocol (PPP) and creating
userids, see Security for PPP Clients.
For information about PPP and subnetting, see PPP Client IP Address
Considerations.
ΓòÉΓòÉΓòÉ 3.2.1. Selecting the LAN Distance Connection Server Workstation ΓòÉΓòÉΓòÉ
To select the LAN workstation that you want to use as the LAN Distance
Connection Server, evaluate the following set up considerations:
Use a supported LAN adapter
Select an OS/2 FIFO workstation
Evaluate memory and fixed disk requirements
Select a dedicated or nondedicated workstation
ΓòÉΓòÉΓòÉ 3.2.1.1. Use a Supported LAN Adapter ΓòÉΓòÉΓòÉ
The LAN adapter installed on the LAN Distance Connection Server must be
supported by the LAN Distance product. See Local Area Network Adapters for a
list of supported adapters.
ΓòÉΓòÉΓòÉ 3.2.1.2. Select an OS/2 FIFO Workstation ΓòÉΓòÉΓòÉ
The LAN Distance product supports workstations with FIFO and non-FIFO serial
communications (COM) ports. Non-FIFO workstations generally do not support
connection speeds greater than 9600 bps, regardless of the connection speed
supported by the attached modem. For this reason, FIFO machines, which
typically support higher connection speeds, are recommended for the LAN
Distance Connection Server.
Note: If you plan to install the LAN Distance Connection Server product on a
non-FIFO OS/2 workstation, you can try to optimize the connection speed for
your non-FIFO serial port. See Modifying the Speed for FIFO and non-FIFO
Serial (COM) Ports.
ΓòÉΓòÉΓòÉ 3.2.1.3. Evaluate Memory and Fixed Disk Requirements ΓòÉΓòÉΓòÉ
The LAN Distance Connection Server product requires 5.0 Mb of fixed-disk
storage space. First Failure Support Technology/2 (700 Kb) and required LAN
transports (2.2 Mb), if these products are not already installed.
The amount of memory recommended for running the LAN Distance Connection Server
product, OS/2, and one LAN application is 12.0 Mb. The requirements for your
LAN Distance Connection Server may vary depending on your LAN applications,
data and response time requirements, and your workstation's processor speed.
ΓòÉΓòÉΓòÉ 3.2.1.4. Select a Dedicated or Nondedicated Workstation ΓòÉΓòÉΓòÉ
The LAN Distance Connection Server can be set up on a dedicated workstation or
on a nondedicated workstation that is running other LAN applications in
addition to the LAN Distance product. To determine the best set up for your
LAN Distance Connection Server, review the following considerations.
ΓòÉΓòÉΓòÉ 3.2.2. Filtering LAN Data Frames at the Connection Server Workstation ΓòÉΓòÉΓòÉ
Setting up the LAN Distance product on a dedicated workstation may make it
easier to define LAN Distance filtering requirements for the following reasons:
Filtering criteria defined at the LAN Distance bridge apply not only to
data frames sent to the LAN Distance Connection Server and the LAN
Distance Remote workstation, but also to any LAN applications residing at
the LAN Distance Connection Server.
If you set up the LAN Distance product on a workstation running other LAN
applications, you must define filtering criteria so these LAN
applications can communicate with the necessary applications and
resources on the LAN.
ΓòÉΓòÉΓòÉ 3.2.2.1. Transparent Bridging on Ethernet LANs ΓòÉΓòÉΓòÉ
Setting up the LAN Distance Connection Server product on a dedicated
workstation may improve the performance of the LAN Distance bridge for the
following reasons.
On Ethernet LANs, the LAN Distance product uses transparent bridging to
route data frames. Transparent bridging is CPU intensive because each
data frame is processed at the LAN Distance bridge.
If the LAN Distance Connection Server is installed on a nondedicated
workstation where the LAN Distance bridge has to compete with other CPU
intensive activities, LAN data frames may not be processed as
efficiently.
ΓòÉΓòÉΓòÉ 3.2.2.2. Setting Up Filtering at the LAN Distance Connection Server ΓòÉΓòÉΓòÉ
If filtering is not enabled at the LAN Distance bridge, the traffic generated
by a busy LAN with large volumes of LAN traffic can easily flood the LAN
Distance WAN connection, causing performance and connection problems.
Filtering is required in most environments to maximize performance and
connection reliability of the LAN Distance WAN connection. The LAN Distance
Connection Server product supports automatic and customized filtering at the
LAN Distance bridge. Automatic filtering is set up and ready to go when you
install the LAN Distance Connection Server product. It can be used for most
applications and LAN Distance environments. For more information about LAN
Distance filtering capabilities, see Types of Filtering Supported for the LAN
Distance Bridge.
ΓòÉΓòÉΓòÉ 3.2.3. Supported LAN Protocols and Applications ΓòÉΓòÉΓòÉ
The LAN Distance product supports multiple protocols and applications through
the Network Driver Interface Specification (NDIS). Over a LAN Distance
connection, LAN Distance Remotes can run LAN applications and networking
software that use industry-standard NDIS-compliant protocols, such as NetBIOS,
IEEE 802.2, IPX, and TCP/IP. Over a LAN Distance connection, PPP clients can
run LAN applications and networking software that use TCP/IP.
Many LAN applications, including client-server applications, use LAN protocols
supported by the LAN Distance product. Some compatible LAN applications and
communications products include Lotus Notes, LANtastic, OS/2 Communications
Manager/2, AS/400, PC Support, and Personal Communications/3270 and 5250.
Some popular network operating systems using LAN protocols supported by the LAN
Distance product include OS/2 LAN Server, NetWare, Microsoft LAN Manager and
Banyan VINES.
For OS/2 and MS Windows LAN Distance Remotes, the LAN Distance product installs
and configures the NetBIOS protocol. If your OS/2 or MS Windows applications
require NDIS-compliant protocols other than NetBIOS, see Protocol Support
Provided for OS/2 and MS Windows LAN Distance Remotes.
ΓòÉΓòÉΓòÉ 3.2.4. Setting Up LAN Applications for Remote Access ΓòÉΓòÉΓòÉ
Because data transfer rates over WAN connections are considerably slower than
rates on a LAN, it may not be efficient to load applications or large data
files over a LAN Distance WAN connection. For example, some applications may
load as much as 5 Mb of code during start up. On a high-speed LAN, this can
take from 5 to 10 seconds, but over a WAN connection, using an asynchronous
modem running at 14400 bps, loading 5 Mb of code can take from 5 to 10 minutes.
To maximize the performance of the LAN Distance WAN connection, follow these
guidelines when setting up your LAN applications to support remote access:
Load applications from the LAN Distance Remote's hard disk and not from a
LAN-attached application server across the LAN Distance WAN connection.
When running an application from a drive on an application server, other
drives are normally allocated for shared data, templates and personal
data. When starting and stopping an application loaded from the LAN
Distance Remote's hard disk, these drives should be allocated and
deallocated dynamically (NET USE).
Some applications including word processors, spreadsheets, and
presentation applications can generate large data files. Files of 1 Mb,
which are not uncommon can take 10 or more minutes to load over the WAN
connection.
Users should keep these application files as small as possible. If large
data files are used, they should be copied once from the application
server on the LAN, then modified locally on the LAN Distance Remote.
Many applications periodically save changes. Set up the applications on
the LAN Distance Remote so that these frequent saves are executed
locally.
Some applications, such as wordprocessors and spreadsheets, use macros to
perform repetitive or complex tasks. Any macro files that are required
by the application should be loaded locally from the LAN Distance Remote'
hard disk and not remotely over the LAN Distance WAN connection.
Printing can also cause a number of problems because postscript files and
print files with graphics can be quite large. A simple 1-page printout
may require a large print file to be sent to the printer. If you
transmit print files over the LAN Distance WAN connection, it may take
considerable time to print a document.
It is not uncommon for applications to create temporary files and printer
spool files when formatting a printout. Make certain that any temporary
print files are created locally.
ΓòÉΓòÉΓòÉ 3.2.5. Setting Up Security at the LAN Distance Connection Server ΓòÉΓòÉΓòÉ
Adding remote access capabilities to your LAN exposes the LAN and its resources
to unauthorized remote access. Setting up LAN Distance security at the LAN
Distance Connection Server is recommended to help prevent unauthorized users
from accessing your LAN. LAN Distance security is an optional feature for LAN
Distance Connection Servers and operates independently from other security
systems on your LAN. To set up LAN Distance security, see Setting Up LAN
Distance Security.
ΓòÉΓòÉΓòÉ 3.2.6. Avoiding Duplicate Addresses ΓòÉΓòÉΓòÉ
LAN Distance logical adapter network addresses identify LAN Distance Remote and
LAN Distance Connection Servers in your LAN Distance wide area network, and
like LAN adapter addresses, LAN Distance logical adapter network addresses must
be unique throughout your network. A LAN Distance logical adapter network
address is either specified by you or automatically generated and assigned to
the LAN Distance Logical Adapter.
To avoid duplicate addresses, use a standardized naming convention to assign
LAN Distance logical adapter network address to LAN Distance Remotes and LAN
Distance Connection Servers. When assigning LAN Distance logical adapter
network addresses, consider the following:
If a LAN Distance logical adapter network address is automatically
generated during installation, it is not guaranteed to be unique within
your network.
If you use a LAN Distance Remote as a stand-alone and a LAN workstation,
use the LAN address as the LAN Distance logical adapter network address.
Because both configurations cannot be active at the same time, this
address is unique when the workstation is set up as a LAN workstation and
when it is a stand-alone LAN Distance Remote.
ΓòÉΓòÉΓòÉ 3.2.7. Avoiding Duplicate Names for NetBIOS Applications ΓòÉΓòÉΓòÉ
When you add a LAN Distance connection to your LAN environment, it is possible
to start a NetBIOS application on a LAN Distance Remote even if its NetBIOS
name is not unique. This can occur if a NetBIOS application is started on the
LAN Distance Remote before a connection to the LAN Distance Connection Server
is established.
LAN Distance Remote NetBIOS names are verified by the LAN Distance Connection
Server when a connection is established. If duplicate NetBIOS names are found,
the LAN Distance Connection Server will disconnect the connection. To avoid
problems with duplicate NetBIOS addresses, use a standardized naming convention
to centrally assign and record these names throughout your network.
ΓòÉΓòÉΓòÉ 3.2.7.1. Multiple NetBIOS Adapters ΓòÉΓòÉΓòÉ
NetBIOS 3.0 Interface supports only four adapters. If four NetBIOS logical
adapters are configured before LAN Distance installation or configuration, LAN
Distance assigns the fifth NetBIOS adapter number to the LAN Distance logical
adapter. Since this fifth adapter is not supported by NetBIOS 3.0, using LAPS
or MPTS, you must delete one of the previous NetBIOS logical adapter
configurations and then configure NetBIOS to be used by the LAN Distance
logical adapter.
ΓòÉΓòÉΓòÉ 3.2.8. Testing LAN Applications and LAN Distance Connections ΓòÉΓòÉΓòÉ
Test your LAN applications and LAN Distance WAN connections as you add LAN
Distance Connection Server and LAN Distance Remote workstations to your LAN
environment:
1. Make sure your LAN applications are operating correctly on the LAN before
you attempt to set up and run the same applications over the LAN Distance
connection.
2. Install and configure the LAN Distance Remote product on a stand-alone
workstation. Set up a phone book entry on the LAN Distance Remote to
call the LAN Distance Connection Server.
3. Install and configure the LAN Distance Connection Server product on a LAN
workstation. Start an answer mode to answer calls from the LAN Distance
Remote.
4. From the LAN Distance Remote, dial the LAN Distance Connection Server to
establish a LAN Distance connection.
5. To test a LAN application, start the LAN application on the LAN Distance
Remote, then complete any performance tuning needed to run the
application over the LAN Distance connection.
ΓòÉΓòÉΓòÉ 4. Quick Start ΓòÉΓòÉΓòÉ
This chapter summarizes required tasks for setting up a LAN Distance Connection
Server. Begin LAN Distance Connection Server set up by reviewing the required
tasks listed in Setup Tasks for a LAN Distance Connection Server .
Required set up tasks for OS/2 LAN Distance Remotes are listed in "Quick
Start for OS/2" in the LAN Distance Remote Guide.
Required set up tasks for MS Windows LAN Distance Remotes are listed in
"Quick Start for MS Windows Workstations" in the LAN Distance Remote
Guide.
ΓòÉΓòÉΓòÉ 4.1. Setup Tasks for a LAN Distance Connection Server ΓòÉΓòÉΓòÉ
Setup Checklist for a LAN Distance Connection Server is a guide for installing
and setting up a LAN Distance Connection Server. Tasks are divided into
required and optional categories and cross-referenced to topics in this book.
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Table 2. Setup Checklist for a LAN Distance Connection Server Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé TASK Γöé GO TO... Γöé DONE Γöé
Γöé Γöé Γöé Γöé
Γöé Γöé Γöé (X) Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé REQUIRED SETUP TASKS Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 1) Select a LAN workstation to Γöé Selecting the LAN Distance Con- Γöé Γöé
Γöé use as the LAN Distance Con- Γöé nection Server Workstation Γöé Γöé
Γöé nection Server. Γöé Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 2) Install prerequisite hardware Γöé Hardware and Software Require- Γöé Γöé
Γöé and software. Γöé ments for the LAN Distance Con- Γöé Γöé
Γöé Γöé nection Server Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 3) Install the LAN Distance Con- Γöé Steps for Installing the LAN Dis- Γöé Γöé
Γöé nection Server product. Γöé tance Connection Server Using Γöé Γöé
Γöé Γöé Diskettes Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 4) Stop all applications, shut Γöé Γöé Γöé
Γöé down and restart your work- Γöé Γöé Γöé
Γöé station. Double-click on the LAN Γöé Γöé Γöé
Γöé Distance icon to start the LAN Γöé Γöé Γöé
Γöé Distance product. Γöé Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 5) Open the Settings notebook to Γöé Opening an Action Window Γöé Γöé
Γöé complete configuration tasks. Γöé Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 6) For each COM port, ARTIC Γöé Setting Up a LAN Distance Port Γöé Γöé
Γöé port, and Other type of adapter Γöé Γöé Γöé
Γöé port that you want to use with Γöé Γöé Γöé
Γöé the LAN Distance product, set up Γöé Γöé Γöé
Γöé a LAN Distance port. Γöé Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 7) For each internal or external Γöé Configuring a Modem Type and Γöé Γöé
Γöé modem, set up a LAN Distance Γöé Assigning Ports to a Modem Type Γöé Γöé
Γöé modem type. Γöé Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 8) Assign each LAN Distance port Γöé Configuring a Modem Type and Γöé Γöé
Γöé that you set up to a modem type. Γöé Assigning Ports to a Modem Type Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 9) If your LAN Distance Con- Γöé Understanding Ethernet Bridges Γöé Γöé
Γöé nection Server is on an Ethernet Γöé Γöé Γöé
Γöé LAN, select Ethernet as your LAN Γöé Γöé Γöé
Γöé type. (Token-Ring is the default Γöé Γöé Γöé
Γöé setting.) Γöé Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 10) Record (or change) the LAN Γöé Changing a LAN Distance Logical Γöé Γöé
Γöé Distance logical adapter network Γöé Adapter Network Address Γöé Γöé
Γöé address assigned during installa- Γöé Γöé Γöé
Γöé tion. Γöé Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 11) If the LAN Distance Con- Γöé Defining Configuration Values for Γöé Γöé
Γöé nection Server is installed on a Γöé the LAN Distance Bridge Γöé Γöé
Γöé Token-Ring LAN that is connected Γöé Γöé Γöé
Γöé to other LAN segments, define a Γöé Γöé Γöé
Γöé bridge number, LAN segment ring Γöé Γöé Γöé
Γöé number, and WAN segment ring Γöé Γöé Γöé
Γöé number for the LAN Distance Γöé Γöé Γöé
Γöé bridge. Γöé Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 12) Verify that automatic fil- Γöé Using the Automatic Filtering Γöé Γöé
Γöé tering is enabled for the LAN Γöé Feature Γöé Γöé
Γöé Distance bridge. Γöé Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 13) Set up answer criteria to Γöé Auto Answer and Answer Modes Γöé Γöé
Γöé answer calls at the LAN Distance Γöé Γöé Γöé
Γöé Connection Server. Γöé Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 14) Stop all applications, shut Γöé Γöé Γöé
Γöé down and restart your workstation Γöé Γöé Γöé
Γöé to make your configuration Γöé Γöé Γöé
Γöé changes effective. Γöé Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé OPTIONAL TASKS Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Table 2. Setup Checklist for a LAN Distance Connection Server Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé TASK Γöé GO TO... Γöé DONE Γöé
Γöé Γöé Γöé Γöé
Γöé Γöé Γöé (X) Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Specify a name for your work- Γöé Changing Your Workstation Name Γöé Γöé
Γöé station to uniquely identify your Γöé Γöé Γöé
Γöé workstation icon. Γöé Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Customize your answer setup to Γöé Customizing Your Answer Modes Γöé Γöé
Γöé automatically start an answer Γöé Γöé Γöé
Γöé mode or a LAN application. Γöé Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé To control remote access to LAN Γöé Enabling LAN Distance Security Γöé Γöé
Γöé resources, enable security at the Γöé and Setting Up Required Fea- Γöé Γöé
Γöé LAN Distance Connection Server Γöé tures for a User Account Γöé Γöé
Γöé and set up user accounts to Γöé Γöé Γöé
Γöé require user log on. Γöé Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé To customize security for all Γöé Defining Policy Options for Your Γöé Γöé
Γöé user accounts, define LAN Dis- Γöé User Accounts Γöé Γöé
Γöé tance security policy. Γöé Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Customize filtering criteria for Γöé Types of Filtering Supported for Γöé Γöé
Γöé the LAN Distance bridge by Γöé the LAN Distance Bridge Γöé Γöé
Γöé defining filtering criteria. Γöé Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé To dial out to a LAN Distance Γöé Creating Phone Book Entries Γöé Γöé
Γöé workstation, set up a phone book Γöé Γöé Γöé
Γöé entry for each LAN Distance work- Γöé Γöé Γöé
Γöé station that you want to dial. Γöé Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé To accept dial requests from LAN Γöé Setting Up LAN Distance Con- Γöé Γöé
Γöé workstations, set up LDACCEPTC on Γöé nection Servers to Establish a Γöé Γöé
Γöé the LAN Distance Connection Γöé LAN-to-LAN Connection and and Γöé Γöé
Γöé Server, and define filtering cri- Γöé Filtering Strategies for the Γöé Γöé
Γöé teria for the LAN Distance Γöé LAN-to-LAN Environment Γöé Γöé
Γöé bridge. Γöé Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé To configure point-to-point Γöé Setting Up PPP Γöé Γöé
Γöé protocol (PPP). Γöé Γöé Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓòÉΓòÉΓòÉ 4.2. Setting Up a LAN Distance Remote Using the Settings Notebook ΓòÉΓòÉΓòÉ
The Settings notebook can be used to set up any type of communications
connection supported by the LAN Distance product.
LAN Distance Remotes setting up synchronous modems and adapters, ARTIC
adapters for multiport connections, and leased lines must use the
Settings notebook.
For LAN Distance Remotes using asynchronous and ISDN connections, the
Basic Settings path is the easiest way to complete configuration. See
Basic Settings set up tasks listed in "Quick Start for OS/2" in the LAN
Distance Remote Guide.
Setup Checklist for LAN Distance Remote Installation and Settings Notebook
Configuration summarizes the general tasks required to configure a LAN
Distance Remote using the Setting notebook. Tasks are divided into required
and optional categories and cross-referenced to topics in this book and the
LAN Distance Remote Guide.
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Table 3. Setup Checklist for LAN Distance Remote Installation and Settings Γöé
Γöé Notebook Configuration Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé TASK Γöé GO TO... Γöé DONE Γöé
Γöé Γöé Γöé Γöé
Γöé Γöé Γöé (X) Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé REQUIRED TASKS Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 1) Install prerequisite hardware Γöé "Hardware and Software Require- Γöé Γöé
Γöé and software. Γöé ments", in the LAN Distance Γöé Γöé
Γöé Γöé Remote Guide Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 2) Review any set up consider- Γöé Setting Up to Run LAN Applica- Γöé Γöé
Γöé ations for installing the LAN Γöé tions Remotely and Setting Up Γöé Γöé
Γöé applications that you want to run Γöé Some Popular LAN Applications Γöé Γöé
Γöé remotely. Γöé Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 3) Install the LAN applications Γöé Setting Up to Run LAN Applica- Γöé Γöé
Γöé that you want to run remotely and Γöé tions Remotely and and Setting Γöé Γöé
Γöé complete any application set up Γöé Up Some Popular LAN Applications Γöé Γöé
Γöé tasks that are required prior to Γöé Γöé Γöé
Γöé installing the LAN Distance Γöé Γöé Γöé
Γöé product. Γöé Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 4) Install the LAN Distance Γöé "Installing the LAN Distance Γöé Γöé
Γöé Remote product. Γöé Product Using Diskettes", in the Γöé Γöé
Γöé Γöé LAN Distance Remote Guide Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 5) Stop all applications, shut- Γöé "Installing the LAN Distance Γöé Γöé
Γöé down and restart your work- Γöé Product Using Diskettes", in the Γöé Γöé
Γöé station. Double-click on the LAN Γöé LAN Distance Remote Guide Γöé Γöé
Γöé Distance icon to start the LAN Γöé Γöé Γöé
Γöé Distance product. Γöé Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 6) Open the Settings notebook to Γöé Opening an Action Window Γöé Γöé
Γöé complete configuration tasks. Γöé Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 7) For each COM port, ARTIC Γöé Setting Up a LAN Distance Port Γöé Γöé
Γöé port, and Other type of adapter Γöé Γöé Γöé
Γöé port that you want to use with Γöé Γöé Γöé
Γöé the LAN Distance product, set up Γöé Γöé Γöé
Γöé a LAN Distance port. Γöé Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 8) For each internal or external Γöé Configuring a Modem Type and Γöé Γöé
Γöé modem, set up a LAN Distance Γöé Assigning Ports to a Modem Type Γöé Γöé
Γöé modem type. Γöé Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 9) Assign each LAN Distance port Γöé Configuring a Modem Type and Γöé Γöé
Γöé that you set up to a modem type. Γöé Assigning Ports to a Modem Type Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 10) If the LAN Distance Con- Γöé Understanding Ethernet Bridges Γöé Γöé
Γöé nection Server that you will Γöé Γöé Γöé
Γöé connect to is on an Ethernet LAN, Γöé Γöé Γöé
Γöé select Ethernet as your LAN type. Γöé Γöé Γöé
Γöé (Token-Ring is the default Γöé Γöé Γöé
Γöé setting.) Γöé Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 11) Record (or change) the LAN Γöé Changing a LAN Distance Logical Γöé Γöé
Γöé Distance logical adapter network Γöé Adapter Network Address Γöé Γöé
Γöé address assigned during installa- Γöé Γöé Γöé
Γöé tion. Γöé Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 12) Set up phone book entries to Γöé Creating Phone Book Entries Γöé Γöé
Γöé dial out from the LAN Distance Γöé Γöé Γöé
Γöé Remote Γöé Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 13) Stop all applications, shut Γöé Γöé Γöé
Γöé down, and restart your work- Γöé Γöé Γöé
Γöé station to make configuration Γöé Γöé Γöé
Γöé changes effective. Γöé Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 14) Complete any application set Γöé Setting Up Some Popular LAN Γöé Γöé
Γöé up tasks required after Γöé Applications Γöé Γöé
Γöé installing the LAN Distance Γöé Γöé Γöé
Γöé product to run your applications Γöé Γöé Γöé
Γöé remotely. Γöé Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé OPTIONAL TASKS Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Table 3. Setup Checklist for LAN Distance Remote Installation and Settings Γöé
Γöé Notebook Configuration Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé TASK Γöé GO TO... Γöé DONE Γöé
Γöé Γöé Γöé Γöé
Γöé Γöé Γöé (X) Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Specify a name for the LAN Dis- Γöé Changing Your Workstation Name Γöé Γöé
Γöé tance Remote to uniquely identify Γöé Γöé Γöé
Γöé the workstation icon. Γöé Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Use the shuttle feature to switch Γöé "Using the Shuttle Feature for Γöé Γöé
Γöé the LAN Distance Remote's config- Γöé OS/2" and "Using the Shuttle Γöé Γöé
Γöé uration from LAN-attached to Γöé Feature for MS Windows", in the Γöé Γöé
Γöé remote and remote to Γöé LAN Distance Remote Guide Γöé Γöé
Γöé LAN-attached. Γöé Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé If the LAN Distance Remote will Γöé Customizing Your Answer Modes Γöé Γöé
Γöé answer calls from LAN Distance Γöé Γöé Γöé
Γöé Connection Servers or LAN Dis- Γöé Γöé Γöé
Γöé tance Remotes, customize Γöé Γöé Γöé
Γöé autoanswer criteria. Γöé Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé To control access to the Γöé Enabling LAN Distance Security Γöé Γöé
Γöé resources on the LAN Distance Γöé and and Setting Up Required Fea- Γöé Γöé
Γöé Remote, enable security and set Γöé tures for a User Account Γöé Γöé
Γöé up user accounts. Γöé Γöé Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
Note: If the shuttle function was enabled during installation, your
workstation must be shuttled to a remote workstation to use the settings
notebook for configuration.
ΓòÉΓòÉΓòÉ 5. Installing the Product ΓòÉΓòÉΓòÉ
This chapter describes the installation methods the LAN Distance product
supports for LAN Distance Connection Servers and LAN Distance Remotes,
including redirected drive installation.
For the LAN Distance Connection Server, it describes preinstallation
tasks, lists diskette installation steps, and explains how to reinstall,
upgrade, and remove the LAN Distance Connection Server product.
To install the LAN Distance Remote product using diskettes, see
"Installing the LAN Distance Product Using Diskettes" in the LAN Distance
Remote Guide. The LAN Distance Remote Guide also covers reinstall,
remove, and upgrade topics for the LAN Distance Remote.
ΓòÉΓòÉΓòÉ 5.1. Hardware and Software Requirements for the LAN Distance Connection Server ΓòÉΓòÉΓòÉ
Before you install the LAN Distance Connection Server product, install
prerequisite software and the WAN hardware you want to configure for the LAN
Distance product.
IBM Warp Server Version 4.0 or later
Install the network operating system software and any LAN applications
that you will run on the LAN Distance Connection Server.
The LAN Distance Connection Server product requires 5.0 Mb of fixed-disk
storage space. Additional disk space is required to install FFST/2 (700
Kb) and required LAN transports (2.2 Mb), if these products are not
already installed.
The amount of memory recommended for running the LAN Distance Connection
Server product, OS/2, and one LAN application is 12.0 Mb. The
requirements for your LAN Distance Connection Server may vary depending
on your LAN applications, data and response time requirements, and your
workstation's processor speed.
Verify that the LAN adapter for the LAN Distance Connection Server is
supported by the LAN Distance product. See Local Area Network Adapters.
If you are using a supported Ethernet card, see the set up instructions
in Installing LAN Adapter Drivers Through LAPS.
A modem and/or adapter for asynchronous, synchronous, or ISDN
communications. See Supported Hardware for a list of supported modems
and adapters.
If you are using an adapter for asynchronous or ISDN communications,
install and configure the adapter using the adapter software, according
to the manufacturer's instructions.
Access to a switched or nonswitched (leased) telephone line to establish
an asynchronous, synchronous, or ISDN connection.
The following are additional planning considerations for setting up the LAN
Distance Connection Server.
WAN adapters used by the LAN Distance Connection Server product cannot be
used by other applications simultaneously.
If Communication Manager/2 is installed on your workstation and you plan
to set up an ISDN connection, set up Communications Manager so it is not
configured for ISDN. See Using the Communications Manager/2 3270
Emulation Feature.
If you are using IBM OS/2 Warp Server Version 4.0, verify that you are
using Multi-Protocol Transport Services (MPTS) Version 5.11 or later. If
you are using IBM OS/2 Warp Server Version 4 (SMP), verify that you are
using MPTS Version 5.2 or later with SMP MPTS APAR IC15968.
If you are using a DHCP server to assign IP addresses to PPP clients and
you would like the LAN Distance userid to be associated with the IP
address, you must use a DHCP server version that contains the "DNS proxy
A record update" feature. For IBM OS/2 Warp Server Version 4.0, APAR
IC15366 is required. For IBM OS/2 Warp Version 4 SMP feature, APAR
IC16980 is required.
If you plan to install the LAN Distance Connection Server product on a
non-FIFO OS/2 workstation, you can try to optimize the connection speed
for your non-FIFO serial port. See Modifying the Speed for FIFO and
non-FIFO Serial (COM) Ports.
ΓòÉΓòÉΓòÉ 5.2. Selecting an Install Method ΓòÉΓòÉΓòÉ
Use one of the following installation methods to install the LAN Distance
product:
Install using the product diskettes.
Install from a redirected drive (attended installation).
Install from a redirected drive using a response file (unattended
installation).
Note: To install the LAN Distance Remote product on a workstation using a
redirected installation method, the workstation must be physically connected
to a LAN.
ΓòÉΓòÉΓòÉ 5.2.1. Installing with Product Diskettes ΓòÉΓòÉΓòÉ
Installing from diskette is a simple procedure. From the workstation you want
to set up as a LAN Distance Connection Server or LAN Distance Remote, insert
Diskette 1 and start the installation program. Windows prompting you to make
selections and insert diskettes guide you through the installation program.
See Steps for Installing the LAN Distance Connection Server Using
Diskettes.
Steps for installing the LAN Distance Remote product using the product
diskettes are described in "Installing the LAN Distance Product Using
Diskettes" in the LAN Distance Remote Guide.
ΓòÉΓòÉΓòÉ 5.2.2. Installing from a Redirected Drive Using Diskette Images ΓòÉΓòÉΓòÉ
Redirected installation requires installing the LAN Distance product(s) once on
a code server. After the code server is set up, users can access diskette
images on the code server from a workstation physically connected to the LAN.
This type of redirected installation (attended) uses the same interface used
when installing from diskette. While you avoid swapping diskettes, you still
must supply answers to installation questions.
See Copying the Diskette Images to the Code Server.
See Steps to Install from a Redirected Drive Using Diskette Images.
ΓòÉΓòÉΓòÉ 5.2.3. Installing from a Redirected Drive Using a Response File ΓòÉΓòÉΓòÉ
You can use a response file to supply answers to installation questions. This
type of redirected installation (unattended) requires installing the LAN
Distance product(s) on a code server and preparing a response file for each
unique LAN Distance workstation that you plan to install. After installation
is started from the workstation, you are not required to respond to
installation questions. The instructions for creating response files are
described in Creating Response Files for LAN Distance Workstations.
See Copying the Diskette Images to the Code Server.
See Creating Response Files for LAN Distance Workstations.
ΓòÉΓòÉΓòÉ 5.3. Steps for Installing the LAN Distance Connection Server Using Diskettes ΓòÉΓòÉΓòÉ
To install the LAN Distance Connection Server product on a LAN workstation:
1. With Diskette 1 in the diskette drive, type A:INSTALL at an OS/2 command
prompt, and press Enter to start the installation program.
2. When the IBM Logo window is displayed, select the OK push button to start
installation.
3. From the Welcome window, you can select Quick Start for a summary of the
information you need to install the LAN Distance product. Select the OK
push button to display the Target Drive window.
4. From the Target Drive window, specify the drive where you want to install
the LAN Distance Connection Server product. LAN Distance files are
stored in the WAL directory on this drive.
Note: If LAN networking software is not already installed on your
workstation and you select a drive that is not the boot drive, a message
window gives you the option of installing LAN networking software on the
boot drive or the drive selected for LAN Distance installation.
5. In the succeeding windows, answer questions, and insert diskettes to
complete LAN Distance Connection Server installation.
Select the Help push button from any window if you need additional
information to make selections or enter values.
6. The Installation Complete window is displayed when the installation has
successfully completed. Select the OK push button to exit the install
program.
7. Remove any diskettes from the diskette drive, stop all currently active
applications, shutdown and restart your workstation.
The LAN Distance icon is displayed on the OS/2 desktop.
8. After you install the LAN Distance Remote product, read through the
README file. This file contains important information that you may need
to configure and use the LAN Distance Connection Server product.
To access the README file, insert Diskette 1. From an OS/2 command
prompt, type A:TYPE README | MORE, then press Enter. To print the README
file type A:PRINT README, then press Enter.
Note: To use the LAN Distance Connection Server product, you must configure
the LAN Distance Connection Server using the Settings Notebook. Required
steps are listed in Setup Checklist for a LAN Distance Connection Server.
ΓòÉΓòÉΓòÉ 5.4. Installing the LAN Distance Product from a Redirected Drive ΓòÉΓòÉΓòÉ
This section describes preparing a code server to support redirected
installation, tells you how to access diskette images from a redirected drive,
and provides steps for creating and using a response file to install the LAN
Distance product.
ΓòÉΓòÉΓòÉ 5.4.1. Copying the Diskette Images to the Code Server ΓòÉΓòÉΓòÉ
Select a workstation to use as the code server that has sufficient available
hard-disk space, and that can be accessed from workstations installing the LAN
Distance product from a redirected drive.
To copy the diskette images for the LAN Distance Remote or LAN Distance
Connection Server product to the code server, run the LDIMAGE utility:
1. Diskette 1 for the LAN Distance products contains the diskette images and
the LDIMAGE utility. Insert Diskette 1 for the product you want to copy
to the code server, go to an OS/2 command prompt, and type:
A:LDIMAGE /T:target
The target parameter is the fully-qualified path on the code server where
you want the diskette images copied. For example, to store the diskette
images in the IMAGES directory on the D drive, type:
A:LDIMAGE \IMAGES
2. The LDIMAGE utility creates a new directory for every diskette image
copied. The naming convention for these directories is:
LOnnnRx for the LAN Distance Remote for OS/2
LOnnnEx for the LAN Distance Connection Server 8-Port
LOnnnAx for the LAN Distance Connection Server
x is the number of the diskette image, and nnn is a version number for
the product.
Using the example in step Copying the Diskette Images to the Code Server,
if you copied the LAN Distance Remote product to the code server, the
diskette images would be saved to these directories:
d:\IMAGES\LOnnnR1
\LOnnnR2
3. Repeat step Copying the Diskette Images to the Code Server for each LAN
Distance product that you want to install from a redirected drive.
ΓòÉΓòÉΓòÉ 5.4.2. Steps to Install from a Redirected Drive Using Diskette Images ΓòÉΓòÉΓòÉ
After you copy diskette images to the code server, use the diskette images to
install the LAN Distance product on your workstation.
1. To verify the names of the diskette image directories, type DIR from the
target path you specified in step Copying the Diskette Images to the Code
Server.
For the example described in step Copying the Diskette Images to the Code
Server, you would type the following to display the directories created:
DIR d:\IMAGES\
The installation program for the LAN Distance products is located in the
first directory (R1, E1, or A1) displayed.
2. To start the installation program, specify the fully-qualified path to
the diskette images on the server (including the directory name for the
first diskette image).
For the previous example, you would type the following from an OS/2
command prompt:
d:\IMAGES\LOnnnR1\INSTALL
Note: When installing a LAN Distance Remote workstation from a redirected
drive using a response file, after restarting, the workstation continues to be
configured as a LAN workstation. To use the workstation as a stand-alone LAN
Distance workstation, use the shuttle feature to switch from a LAN workstation
to a remote workstation configuration. See "Using the Shuttle Feature for
OS/2" in the LAN Distance Remote Guide.
ΓòÉΓòÉΓòÉ 5.5. Creating Response Files for LAN Distance Workstations ΓòÉΓòÉΓòÉ
A response file is a text file containing required and optional keywords and
their values. Two sample response files (LD_REM.RSP and LD_SVR.RSP) are
supplied with the LAN Distance Connection Server product, see Sample LAN
Distance Response Files. These files are stored on Diskette 1 in the LAN
Distance Connection Server package. During installation these files are placed
in the WAL directory.
You can copy sample response files and modify keyword=value pairs to create
response files for LAN Distance workstations. A separate response file is
required for each LAN Distance workstation type. Descriptions for keywords are
in Keywords for Creating LAN Distance Response Files.
For general information regarding the structure, processing and design of
response files, see Automated Installation for CID Enabled Extended Services,
LAN Server V3.0 and Network Transportation Services/2.
Sample LAN Distance Response Files
LD_REM.RSP
Target = D:\
WorkstationType = Remote
ConnectionType = Async
Modem = IBM7855.PIF
Port = COM2
Phone = (512)477-9254
Address = 400012345678
LD_SVR.RSP
Target = D:\
WorkstationType = Server
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Table 4. Keywords for Creating LAN Distance Response Files Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé KEYWORD Γöé DESCRIPTION Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Target Γöé This keyword is optional for LAN Distance Remotes Γöé
Γöé Γöé and LAN Distance Connection Servers. It defines Γöé
Γöé Γöé the fully-qualified path where the diskette images Γöé
Γöé Γöé are copied on the code server. Γöé
Γöé Γöé Γöé
Γöé Γöé If the target keyword is not defined, the target Γöé
Γöé Γöé defaults to the boot drive. Γöé
Γöé Γöé Γöé
Γöé Γöé If the target keyword is defined in the response Γöé
Γöé Γöé file, it overrides the target path you specify at Γöé
Γöé Γöé the command line. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé WorkstationType= Γöé This keyword is optional. It identifies the work- Γöé
Γöé Remote, Server Γöé station type. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé ConnectionType = Γöé This keyword is required for ISDN. It identifies Γöé
Γöé ASYNC, ISDN Γöé the type of WAN hardware (ASYNC modem or ISDN Γöé
Γöé Γöé adapter) used to establish a LAN Distance con- Γöé
Γöé Γöé nection. ASYNC is the default value. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Modem = PIF file name Γöé This keyword is required for LAN Distance Remotes Γöé
Γöé Γöé if the connection type is ASYNC. PIF file names Γöé
Γöé Γöé for asynchronous modems are listed in Modems. No Γöé
Γöé Γöé default is provided for this keyword. If an Γöé
Γöé Γöé invalid file name is provided, modem configuration Γöé
Γöé Γöé is incomplete. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Port = COMx Γöé This keyword is required for LAN Distance Remotes Γöé
Γöé Γöé if the connection type is ASYNC. COMx identifies Γöé
Γöé Γöé the serial (COM) port that the asynchronous modem Γöé
Γöé Γöé is connected to. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Phone = 555-555-5555 Γöé This keyword is not required for LAN Distance Γöé
Γöé Γöé Remotes. It identifies the phone number of the Γöé
Γöé Γöé LAN Distance Remote or LAN Distance Connection Γöé
Γöé Γöé Server you want to connect to. Use decimal digits Γöé
Γöé Γöé (50-character maximum) to define the phone number; Γöé
Γöé Γöé use dashes, spaces, and commas to separate digits. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé LANType = TokenRing, Γöé This keyword is required for Ethernet. It identi- Γöé
Γöé Ethernet Γöé fies the type of LAN that the LAN Distance Con- Γöé
Γöé Γöé nection Server is connected to. Token-Ring is the Γöé
Γöé Γöé default value. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Address= 400012345678 Γöé This keyword is optional. This unique address is Γöé
Γöé Γöé a hexadecimal number in either Token-Ring or Γöé
Γöé Γöé Ethernet format. A default value is generated if Γöé
Γöé Γöé a value is not specified. Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓòÉΓòÉΓòÉ 5.5.1. Steps to Install from a Redirected Drive Using a Response File ΓòÉΓòÉΓòÉ
Review the command syntax for LAN Distance response files that follows before
you begin installation steps:
1. To start installation using a response file, type the following from an
OS/2 command line. The parameters shown in bold type are required.
d:\path\INSTALL /R:rspfile /T:target /G:group /L1:log
d: This parameter is required. It identifies the redirected
drive on the code server where the LAN Distance diskette
images are stored.
path This parameter is required. It defines the
fully-qualified path to the directory on the code server
that contains the first diskette image (R1, E1 or A1).
rspfile This parameter is required. It is the name of the
response file. It must be preceded by a fully-qualified
path that includes either a local or redirected drive
specification.
target This parameter is optional. If you do not specify a
target path (drive and/or directory) at the command line,
or define a target path in the response file, the LAN
Distance product is installed on the current boot drive.
group This parameter is optional. It is the path to your group
response file.
log This parameter is optional. It identifies the file name
and fully-qualified path where your installation error
messages are written.
If you do not specify a file name, error messages are
written to the WALINST.LOG file.
2. Response file installation takes several minutes. When installation is
complete, a command prompt is returned. If a command prompt is returned
quickly, check the error log.
3. After stopping all active applications, shut down and restart the
workstation to activate these changes.
Note: For LAN Distance Remotes, after you restart the workstation, the
workstation is automatically set up to operate as a stand-alone LAN Distance
Remote. To use the workstation on the LAN, use the Shuttle feature to switch
to from the remote to the LAN-attached configuration. See "Using the Shuttle
Feature for OS/2" in the LAN Distance Remote Guide.
ΓòÉΓòÉΓòÉ 5.6. Accessing Installation Error Log Files ΓòÉΓòÉΓòÉ
Installation information is saved in the following two files located in the
\OS2\INSTALL directory:
WALINST.LOG Contains LAN Distance installation messages
LAPSHIST.LOG Contains LAPS installation messages
ΓòÉΓòÉΓòÉ 5.7. Modifications Made to Your Configuration Files During Installation ΓòÉΓòÉΓòÉ
When you install the LAN Distance product, LAN Distance files are created and
some changes are made to your existing configuration files.
ΓòÉΓòÉΓòÉ 5.7.1. The LAN Distance Directory ΓòÉΓòÉΓòÉ
During installation, the LAN Distance WAL directory, is created. The LAN
Distance files shown in LAN Distance User Configuration Files are stored in the
WAL directory.
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Table 5. LAN Distance User Configuration Files Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé FILE NAME Γöé FILE DESCRIPTION Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé WCLLOCAL.INI Γöé Local configuration information for the LAN Dis- Γöé
Γöé Γöé tance workstation Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé WCBUSRF.ISF Γöé Security information from the user account data- Γöé
Γöé Γöé base Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé WCLDIAL.CXD Γöé Telephone numbers and connection information for Γöé
Γöé Γöé phone book entries Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé WCLNET.INI Γöé Modem configuration information Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé WCLIPADR.INI Γöé List of available IP addresses for point-to-point Γöé
Γöé Γöé protocol (PPP). The user creates the file using Γöé
Γöé Γöé an ASCII editor after installation is complete. Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓòÉΓòÉΓòÉ 5.7.2. System Configuration Files ΓòÉΓòÉΓòÉ
During installation, changes are also made to the CONFIG.SYS and PROTOCOL.INI
configuration files for your workstation. Backups of these system
configuration files are saved before the files are changed.
Configuration Files Changed During Installation describes the changes to these
files.
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Table 6. Configuration Files Changed During Installation Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé FILE Γöé BACKUP Γöé CHANGES Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé CONFIG.SYS Γöé d:\CONFIG.WALΓöé o The WAL directory is added to your path Γöé
Γöé Γöé Γöé specifications for: Γöé
Γöé Γöé Γöé - LIBPATH Γöé
Γöé Γöé Γöé - DPATH Γöé
Γöé Γöé Γöé - PATH Γöé
Γöé Γöé Γöé o The LAN Distance helps are added to the Γöé
Γöé Γöé Γöé HELP specification. Γöé
Γöé Γöé Γöé o The specifications for the LAN Distance Γöé
Γöé Γöé Γöé device drivers are added. Γöé
Γöé Γöé Γöé o The device drivers for LAPS and NetBIOS Γöé
Γöé Γöé Γöé are added. Γöé
Γöé Γöé Γöé o If FFST/2 is installed during LAN Distance Γöé
Γöé Γöé Γöé installation, appropriate statements for Γöé
Γöé Γöé Γöé it are added. Γöé
Γöé Γöé Γöé o Statements for the locked file device Γöé
Γöé Γöé Γöé driver are added temporarily to the top of Γöé
Γöé Γöé Γöé your CONFIG.SYS file. The statements are Γöé
Γöé Γöé Γöé removed the next time you start your work- Γöé
Γöé Γöé Γöé station. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé IBMCOM\ Γöé d:\WAL\ Γöé o If NetBIOS is installed during LAN Dis- Γöé
Γöé PROTOCOL.INI Γöé PROTOCOL.WAL Γöé tance installation, a section for Γöé
Γöé Γöé Γöé NETBEUI_NIF is added. Γöé
Γöé Γöé Γöé o Your NetBIOS timers are adjusted. See Γöé
Γöé Γöé Γöé Adjusting NetBIOS Timers for for the new Γöé
Γöé Γöé Γöé timer values. Γöé
Γöé Γöé Γöé o The number of NetBIOS NCBs, names, and Γöé
Γöé Γöé Γöé sessions are increased. Γöé
Γöé Γöé Γöé o A section is added for VLAN_kernel. Γöé
Γöé Γöé Γöé o A section for PDFH_NIF is added. Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓòÉΓòÉΓòÉ 5.8. Interrupting the LAN Distance Installation Program ΓòÉΓòÉΓòÉ
Interrupting the LAN Distance installation program is not recommended. If you
must interrupt installation, wait until the Target Drive window is displayed.
At this point in the installation, no files have been installed or changed so
you can install the LAN Distance product again without having to restore your
workstation.
If you interrupt installation after selecting the OK push button on the Target
Drive window, some files are installed and some are changed. Depending on how
much of the installation procedure has been performed, you may be able to use
the LDREMOVE program to restore your workstation. See Removing the LAN
Distance Connection Server Product.
ΓòÉΓòÉΓòÉ 5.9. Upgrading or Reinstalling the LAN Distance Connection Server Product ΓòÉΓòÉΓòÉ
You can upgrade from a previous release (or a beta release) of the LAN Distance
Connection Server product or reinstall the LAN Distance Connection Server
product on your workstation.
The steps for upgrading and reinstalling the LAN Distance Connection
Server product are the same.
Reinstalling or upgrading the LAN Distance Connection Server product
requires an additional 2.4 Mb of temporary disk space.
If you want to change your workstation type (LAN Distance Connection
Server or LAN Distance Remote), use LDREMOVE to remove the LAN Distance
Connection Server product, then install the LAN Distance Remote product.
When you reinstall or upgrade, your current LAN Distance files are
reinstalled, with the exception of user configuration files. See the LAN
Distance User Configuration Files table in The LAN Distance Directory.
The configuration information in these files is not changed.
If you upgrade to version 1.1 of the LAN Distance Connection Server
product, the automatic filtering feature is not enabled until you open
and close the Settings notebook.
If you do not want to save the information in your user configuration
files, use LDREMOVE to remove the LAN Distance product and then perform
an initial install.
To upgrade or reinstall the LAN Distance Connection Server product.
1. Insert Diskette 1 in the diskette drive, type A:INSTALL from an OS/2
command prompt, and press Enter.
2. When this message window shown in Message for Upgrade or Reinstallation
is displayed, select the OK push button to continue.
Message for Upgrade or Reinstallation
3. When the Reinstallation Complete window appears, select the OK push
button.
4. To use the LAN Distance Connection Server product, shut down and restart
your workstation.
Your Settings notebook configuration information has not been changed and
is active. Make any configuration changes through the Settings notebook.
ΓòÉΓòÉΓòÉ 5.10. Removing the LAN Distance Connection Server Product ΓòÉΓòÉΓòÉ
Run the LDREMOVE program to remove the LAN Distance Connection Server product
if you want to:
Remove the LAN Distance Connection Server product.
Remove a partially removed or partially installed LAN Distance Connection
Server product. If the LDREMOVE product was not used to remove the LAN
Distance product, or you interrupted the LAN Distance Connection Server
installation program, some LAN Distance files may not be removed, and
your system configuration files may not be restored.
Prepare to change your LAN Distance Connection Server to a LAN Distance
Remote.
To use the LDREMOVE program to remove the LAN Distance Connection Server
product:
1. From an OS/2 command line, type LDREMOVE.
If the LDREMOVE program is not found, insert Diskette 1 in the diskette
drive, type A:LDREMOVE, and press Enter. If the LDREMOVE program is
found, the Remove LAN Distance window is displayed. Go to step Removing
the LAN Distance Connection Server Product.
If the LDREMOVE program is not found, the REXX program needed to run the
LDREMOVE program may not be installed on your workstation, go to step
Removing the LAN Distance Connection Server Product.
2. Try using the LDREM command, which does not require the REXX program.
With Diskette 1 in the diskette drive, from an OS/2 command prompt, type
a:LDREM a: (where a: is the diskette drive).
3. From the Remove LAN Distance window, specify whether you want to archive
or delete LAN Distance configuration files.
Remove LAN Distance Window
Select the Delete configuration files radio button to remove LAN
Distance configuration files.
Select the Archive configuration files radio button to store a
backup copy of your LAN Distance configuration files.
The user configuration files listed in The LAN Distance Directory
are stored in the WAL\BACKUP directory. User configuration files
are not automatically restored when you install the LAN Distance
Connection Server program again. To restore the information in
these files, manually copy the files after you install the LAN
Distance Connection Server product.
The following files are also stored in the WAL\BACKUP directory when
you archive configuration files.
PROTOCOL.WAL Contains the PROTOCOL.INI file that was
active before you typed LDREMOVE
CONFIG.WAL Contains the CONFIG.SYS file that was
active before you typed LDREMOVE
4. Select the Remove push button to start the removal process.
5. When the LAN Distance Remove Complete window appears stating that removal
is complete, shut down and restart your workstation.
ΓòÉΓòÉΓòÉ 6. Understanding the User Interface ΓòÉΓòÉΓòÉ
The LAN Distance user interface is based on the object-action model of the
Workplace Shell implemented in OS/2 version 2.0 and later, where an object is
selected and then an action is selected to be applied to the object. Objects
within the LAN Distance user interface are represented by icons and names.
Your workstation is an example of a LAN Distance object. Objects are displayed
as items in windows, list boxes, and containers. Actions are selected using
pull-down menus, pop-up windows, and push buttons.
ΓòÉΓòÉΓòÉ 6.1. The LAN Distance Workstations Window ΓòÉΓòÉΓòÉ
The LAN Distance installation program adds the LAN Distance product icon, shown
in The LAN Distance Product Icon, to your OS/2 Workplace Shell. You can move
the icon anywhere in the Workplace Shell.
The LAN Distance Product Icon
To select the LAN Distance product icon and open your LAN Distance Workstations
window:
1. Locate the LAN Distance product icon.
2. Double click on the icon with mouse button 1.
The LAN Distance Workstations window displays as shown in The LAN Distance
Workstations Window. It is where you work with the workstations in your LAN
Distance wide area network.
The LAN Distance Workstations Window
To refresh or change the format of your LAN Distance Workstations window:
1. Open the LAN Distance Workstations window. and select the MyWorkstation
icon.
2. Select View from the menu bar.
3. Select:
Icon, to view workstations in an icon format.
Details, to view workstations in a details format.
Refresh now, to update your LAN Distance Workstations window. In
addition to refreshing the LAN Distance Remote workstations that you
dialed, your workstation sends a broadcast message to locate LAN
Distance Connection Servers. It might take several minutes for all
of their responses to be received, depending on LAN traffic, bridge
hops, and the number of LAN Distance Connection Servers that
respond.
The default name for your workstation icon is MyWorkstation. If you want to
change your name to something more descriptive, see Changing Your Workstation
Name.
Use the menu bar at the top of the LAN Distance Workstations window to begin
working with a LAN Distance workstation. LAN Distance Workstations Window,
Menu Bar describes the actions that can be selected from the menu bar.
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Table 7. LAN Distance Workstations Window, Menu Bar Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé ACTION Γöé CHOICE Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé SELECTED Γöé Choose service, management, and configuration action windows Γöé
Γöé Γöé from the pull-down menu for the selected workstation. Γöé
Γöé Γöé Γöé
Γöé Γöé Open an action window for a workstation from the pull-down. Γöé
Γöé Γöé For example, open MYWORKSTATION as Phone Book to dial to Γöé
Γöé Γöé another workstation. See LAN Distance Connection Server Γöé
Γöé Γöé Workstation Actions for information about all the action Γöé
Γöé Γöé windows that can be selected from this pull-down menu. Γöé
Γöé Γöé Γöé
Γöé Γöé If you are not already logged on to a secure LAN Distance Γöé
Γöé Γöé workstation, you are prompted to log on when you open an Γöé
Γöé Γöé action window for the workstation. See User IDs and Γöé
Γöé Γöé Passphrases for information about logging on. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé VIEW Γöé Select how LAN Distance objects are displayed in windows: Γöé
Γöé Γöé as icons or in a details format. Γöé
Γöé Γöé Γöé
Γöé Γöé Also, refresh your LAN Distance Workstations window or Γöé
Γöé Γöé change the order of the workstations displayed there. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé HELP Γöé Access online help for the LAN Distance Workstations window Γöé
Γöé Γöé or view the task index. Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓòÉΓòÉΓòÉ 6.2. Opening an Action Window ΓòÉΓòÉΓòÉ
To open an action window for a LAN Distance workstation:
1. Open the LAN Distance Workstations window and select the MyWorkstation
icon.
2. From the menu bar, select Selected and Open as.
3. Select an action window from the pull-down menu.
The Open as pull-down menu is shown in Open as Pull-Down Menu.
Open as Pull-Down Menu
Perform many actions by selecting action windows from the Open as pull-down
menu. On a secure LAN Distance workstation only those action windows that you
are authorized to open are included in the pull-down menu. For example, if you
are a LAN Distance administrator, the User Account Management notebook is not
included in the pull-down menu because only security administrators can update
security policies and the user account database.
If LAN Distance security is not enabled on a workstation, the Open as
pull-down menu includes only the action windows that a LAN Distance
administrator is authorized to open.
See Setting Up LAN Distance Security for information about LAN Distance
security, user types, and logging on.
ΓòÉΓòÉΓòÉ 6.2.1. Notebooks ΓòÉΓòÉΓòÉ
Opening some action windows results in opening a notebook. Notebooks are
divided into sections by tabs. To move through a notebook, select its tabs or
turn its pages using the arrows at the bottom right corner of the notebook.
Some notebooks have other notebooks nested within them.
A tab section can contain more than one page. Make sure you proceed completely
through all of the pages for a section when you access it.
ΓòÉΓòÉΓòÉ 6.2.2. Action Window ΓòÉΓòÉΓòÉ
LAN Distance Connection Server Workstation Actions describes all the action
windows that can be included in the Open as pull-down. The user type required
for each action window is also listed.
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Table 8. LAN Distance Connection Server Workstation Actions Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé OPEN AS... Γöé ACTION Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé PHONE BOOK Γöé Establish connections to LANs and other workstations. Γöé
Γöé Γöé Γöé
Γöé Γöé The phone book is your dialing directory. It contains phone Γöé
Γöé Γöé book entries for the information needed to establish con- Γöé
Γöé Γöé nections. Γöé
Γöé Γöé Γöé
Γöé Γöé Double clicking with mouse button 1 on MYWORKSTATION also Γöé
Γöé Γöé opens your Phone Book window. Γöé
Γöé Γöé Γöé
Γöé Γöé Required LAN Distance privilege: user Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé CALL AND PORT Γöé View and manage the calls established through the work- Γöé
Γöé MANAGEMENT Γöé station. Also, stop and start your port managers. Γöé
Γöé Γöé Γöé
Γöé Γöé Required LAN Distance privilege: user Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé LOGGED-ON Γöé View the users that are logged on to the workstation. Γöé
Γöé USERS Γöé Γöé
Γöé Γöé This action window is available only on secure LAN Distance Γöé
Γöé Γöé workstations. Γöé
Γöé Γöé Γöé
Γöé Γöé Required LAN Distance privilege: user Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé PERSONAL Γöé Manage your personal account on the workstation. Γöé
Γöé ACCOUNT Γöé Γöé
Γöé INFORMATION Γöé View your passphrase status and, optionally, change your Γöé
Γöé Γöé passphrase and your personal account description. Γöé
Γöé Γöé Γöé
Γöé Γöé This action window is available only on secure LAN Distance Γöé
Γöé Γöé workstations. Γöé
Γöé Γöé Γöé
Γöé Γöé Required LAN Distance privilege: user Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé USER ACCOUNT Γöé Manage the workstation security policy and its user account Γöé
Γöé MANAGEMENT Γöé database. Γöé
Γöé Γöé Γöé
Γöé Γöé Set up a user account database to designate which users are Γöé
Γöé Γöé allowed to remotely access the workstation or LAN. Γöé
Γöé Γöé Γöé
Γöé Γöé This action window is available only on secure LAN Distance Γöé
Γöé Γöé workstations. Γöé
Γöé Γöé Γöé
Γöé Γöé Required LAN Distance privilege: LAN Distance security Γöé
Γöé Γöé administrator Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé SETTINGS Γöé Configure the LAN Distance product. Γöé
Γöé Γöé Γöé
Γöé Γöé The Settings notebook contains many pages. Five of its tabs Γöé
Γöé Γöé lead to other notebooks: Γöé
Γöé Γöé Γöé
Γöé Γöé o Phone Book Γöé
Γöé Γöé o Answer Γöé
Γöé Γöé o Ports Γöé
Γöé Γöé o Modems Γöé
Γöé Γöé o Bridge Γöé
Γöé Γöé Γöé
Γöé Γöé Configuration changes you make in the Settings notebook or Γöé
Γöé Γöé its imbedded notebooks are not saved until you close the Γöé
Γöé Γöé Settings notebook. You can view and work with all of your Γöé
Γöé Γöé changes while the notebook is open. When you close the Set- Γöé
Γöé Γöé tings notebook, choose whether to accept or delete your Γöé
Γöé Γöé changes. Γöé
Γöé Γöé Γöé
Γöé Γöé The Settings notebook can be opened by any user. On a Γöé
Γöé Γöé secure LAN Distance workstation, the Settings notebook dis- Γöé
Γöé Γöé plays only the tabs that are granted to the user who opens Γöé
Γöé Γöé the notebook. For example, the notebook includes only the Γöé
Γöé Γöé Information tab for a LAN Distance user. If a LAN Distance Γöé
Γöé Γöé administrator opens the notebook, all of tabs, except Secu- Γöé
Γöé Γöé rity are available. Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Table 8. LAN Distance Connection Server Workstation Actions Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé OPEN AS... Γöé ACTION Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé MESSAGE LOG Γöé View error and warning messages generated by the LAN Dis- Γöé
Γöé Γöé tance product. Γöé
Γöé Γöé Γöé
Γöé Γöé Use the message log to investigate and correct LAN Distance Γöé
Γöé Γöé configuration and connection problems. Contact your desig- Γöé
Γöé Γöé nated support organization for additional help if you cannot Γöé
Γöé Γöé resolve a problem with the LAN Distance product. Γöé
Γöé Γöé Γöé
Γöé Γöé Required LAN Distance privilege: user Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé ERROR LOG Γöé Access the OS/2 error log facility and view the errors Γöé
Γöé Γöé logged there by the LAN Distance product. Γöé
Γöé Γöé Γöé
Γöé Γöé The information in the OS/2 error log is in hexadecimal Γöé
Γöé Γöé format. It is intended to help your designated support Γöé
Γöé Γöé organization resolve error situations. Γöé
Γöé Γöé Γöé
Γöé Γöé Required LAN Distance privilege: user Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé TRACKING Γöé Access information and tools for problem determination, Γöé
Γöé Γöé including the audit log. Tools include trace, dump, and Γöé
Γöé Γöé file retrieval facilities. Γöé
Γöé Γöé Γöé
Γöé Γöé On a secure LAN Distance workstation, the Tracking notebook Γöé
Γöé Γöé displays only the tabs that are granted to the user who Γöé
Γöé Γöé opens the notebook. For example, a LAN Distance user cannot Γöé
Γöé Γöé access an audit log, so the Audit tab is not displayed for a Γöé
Γöé Γöé LAN Distance user. Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓòÉΓòÉΓòÉ 6.3. Remotely Administering a LAN Distance Connection Server ΓòÉΓòÉΓòÉ
To manage a LAN Distance Connection Server from a remote location, select the
LAN Distance Connection Server in your LAN Distance Workstations window. The
following functions, however, are not available when you access a LAN Distance
Connection Server remotely:
Phone Book
Message log
Error log
Other restrictions on performing tasks remotely are:
The Security tab is not included in the Settings notebook for a remote
LAN Distance Connection Server.
Only a LAN Distance administrator can open the Tracking notebook on a
remote LAN Distance Connection Server.
ΓòÉΓòÉΓòÉ 6.4. Command Line Interface ΓòÉΓòÉΓòÉ
The LAN Distance product provides a command line interface as an alternative to
using its graphical user interface. Type commands directly at the OS/2 command
prompt or imbed them in command files to create batch procedures. Mix them
with your network operating system and LAN application commands to create
integrated procedures.
For example, use LAN Distance commands to start and stop the LAN Distance
product, log on, and dial. See Command Line Interface Reference for
information about the LAN Distance command line interface.
ΓòÉΓòÉΓòÉ 6.5. Stopping the LAN Distance Product ΓòÉΓòÉΓòÉ
Before stopping the LAN Distance product on your workstation, hang up all your
LAN Distance connections and close all your open notebooks. To stop the LAN
Distance product, close the LAN Distance Workstations window.
If you do not hang up your LAN Distance connections, the LAN Distance product
hangs them up before stopping. Also, any open notebooks are closed and the
changes are not saved.
ΓòÉΓòÉΓòÉ 6.6. Changing Your Workstation Name ΓòÉΓòÉΓòÉ
To change your LAN Distance workstation name from its default of MyWorkstation:
1. Open the LAN Distance Workstations window and select the MyWorkstation
icon.
2. From the menu bar, select Selected, Open as, and Settings.
3. Select the Workstation tab.
Use Settings Notebook, Workstation Tab as a guide for updating your LAN
Distance workstation name.
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Table 9. Settings Notebook, Workstation Tab Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé ENTRY FIELDS Γöé ACTIONS & INFORMATION Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé NAME OF THIS Γöé Specify your new LAN Distance workstation name. Γöé
Γöé LAN DISTANCE Γöé Γöé
Γöé WORKSTATION Γöé The icon for your workstation in the LAN Distance Work- Γöé
Γöé Γöé stations window includes your workstation name. Your work- Γöé
Γöé Γöé station name also identifies your workstation for call and Γöé
Γöé Γöé port management when security is disabled. (If security is Γöé
Γöé Γöé enabled, then your user ID identifies your workstation.) Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé DESCRIPTION Γöé Describe your workstation. Γöé
Γöé OF THIS LAN Γöé Γöé
Γöé DISTANCE Γöé Your workstation description is displayed when your LAN Dis- Γöé
Γöé WORKSTATION Γöé tance Workstations window is viewed in details format. Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓòÉΓòÉΓòÉ 6.7. Connecting to a Non-LAN Distance Workstation ΓòÉΓòÉΓòÉ
Your LAN Distance workstation runs in 1 of 2 modes to allow it to connect to
either LAN Distance or non-LAN Distance workstations.
Note: A PPP client is considered to be a LAN Distance client.
LAN Distance security functions are not available when your workstation is set
up to connect to a non-LAN Distance workstation.
To switch modes:
1. Open the Settings notebook and select the Workstation tab.
2. Select the Connect to a non-LAN Distance destination check box.
3. Restart the LAN Distance product to activate your new mode.
ΓòÉΓòÉΓòÉ 7. Setting Up Ports and Modems ΓòÉΓòÉΓòÉ
The LAN Distance product uses your WAN hardware (modems and WAN adapters) to
establish wide area connections. Before you can dial out or answer calls to
establish a LAN Distance connection, set up your LAN Distance ports.
This chapter describes:
Setting up ports and modem types
Enabling ISDN ports
Customizing your modem configuration
Creating new modem types
ΓòÉΓòÉΓòÉ 7.1. Modems and WAN Adapters ΓòÉΓòÉΓòÉ
Install your modems and WAN adapters, according to the manufacturer
instructions, before configuring your LAN Distance ports and modems.
Supported Hardware lists the modems and adapters that the LAN Distance product
supports. If your modem is not listed, you can try configuring your modem
using a similar modem type, or modify the PIF file for a listed modem to meet
the requirements of your unlisted modem.
The LAN Distance Connection Server requires exclusive use of its WAN resources.
When the LAN Distance product is running, other communications software can not
use the modems, adapters, and ports configured for the LAN Distance product.
The LAN Distance Connection Server supports up to 128 connections. Of these 128
connections, 64 can be PPP clients. In order to support more than 32
concurrent connections, a change must be made to config.sys. Each instance of
DEVICE=x:\IBMCOM\MACS\MACFH.OS2 supports 16 connections. By default, there are
two instances of this device driver loaded in the config.sys. To support more
than 32 connections, additional instances of this device driver must be loaded.
ΓòÉΓòÉΓòÉ 7.2. Ports and Modem Types ΓòÉΓòÉΓòÉ
A LAN Distance port is the access point to your workstation for wide area
connections. LAN Distance calls are dialed and answered through ports. One port
is configured for each modem, internal or external, that you are setting up for
the LAN Distance product.
Use this procedure to set up a LAN Distance port and its asynchronous or
synchronous modem:
1. Set up a LAN Distance port.
Configure one LAN Distance port for every modem on your workstation. The
LAN Distance product defines three types of ports:
Asynchronous COM ports with internal or external modems
ARTIC ports for asynchronous and synchronous external modems
Other for other types of asynchronous and synchronous WAN adapters
2. Configure a modem type.
Set up at least one modem type for every type of modem you want to use
with the LAN Distance product. Some examples of modem types are the IBM
7855 Modem, the Hayes Optima 14400 Modem, and the Codex 3260 Modem.
3. Assign your port to a modem type.
The assignment of a port to a modem type provides the association between
your ports and your modem. Assign each of your LAN Distance ports to a
modem type.
ΓòÉΓòÉΓòÉ 7.2.1. Using Synchronous Modems and Leased Lines ΓòÉΓòÉΓòÉ
If you are using a synchronous modem or a leased line, you will need to assign
one of the following generic modem types to your port.
Synchronous Switched Connection Modem
If you have a synchronous modem and a switched line, select this generic
modem type regardless of the brand of modem you are using. For example, if
you have an IBM 7855 modem that is configured for synchronous transmission
mode, select this modem type instead of the IBM 7855 modem type. (The IBM
7855 modem type listed in the Available modem types list box is set up for
asynchronous data transmission over a switched line.)
Asynchronous Leased Line Modem
If you have a leased line and are using an asynchronous modem, select this
modem type regardless of the brand of modem you are using. For example, if a
Hayes Optima modem is attached to your leased line, select this modem type
instead of the Hayes Optima modem type. (The Hayes Optima modem type listed
in the Available modem types list box is set up to use a switched telephone
line.)
Synchronous Leased Line Modem
If you have a synchronous modem and a leased line, select this modem type
regardless of the brand of modem you are using. For example, if you have an
IBM 7855 modem attached to your leased line, select this modem type instead
of the IBM 7855 modem type. (The IBM 7855 modem type listed in Available
modem types is set up to use a switched connection.)
ΓòÉΓòÉΓòÉ 7.2.2. Starting and Stopping Your Modem Types ΓòÉΓòÉΓòÉ
All your modem types are automatically started when you start the LAN Distance
product. After your modem types are started, you can dial and answer calls
through the ports assigned to modem types.
If you do not want your modem types started automatically, modify AUTOSTART
parameter in the PIF file for the modem type. Modifying Modem Strings in a LAN
Distance PIF File describes how to customize the configuration file for a modem
type.
All of the ports assigned to a modem type are started and stopped as a group.
If you want to manage ports individually or define different subgroups, you can
configure separate modem types. See Configuring a Modem Type and Assigning
Ports to a Modem Type for information about setting up multiple modem types to
manage your LAN Distance ports.
For more information about managing your modem types, see Using System
Management Tools.
ΓòÉΓòÉΓòÉ 7.2.3. Customizing Your Ports for Dialing and Answering ΓòÉΓòÉΓòÉ
You can configure phone book entries and answer modes so that certain ports are
set up to either dial or answer calls. See Setting Up the Phone Book and
Answering Incoming Calls for information about selecting ports for dialing and
answering.
ΓòÉΓòÉΓòÉ 7.3. The Inactivity Timeout Feature ΓòÉΓòÉΓòÉ
This feature allows the administrator of a Connection Server to specify
conditions for detecting a lack of activity over the various established
connections and can force a disconnection of the link when that inactivity
condition is present.
ΓòÉΓòÉΓòÉ 7.3.1. How Inactivity Timeout Works ΓòÉΓòÉΓòÉ
Every connection established by a machine where the inactivity timer is
installed and operating is subjected to a "usage" test every minute. The test
is somewhat like asking the question, "Over the past minute, have enough LAN
frames passed across this link?" If the link fails the test enough times in
succession without ever passing it, the link is broken.
LAN Distance must be told two pieces of information by the Connection Server
administrator:
How many minutes to tolerate inactivity on the link before forcing a
disconnection
The minimum number of LAN frames that must cross the link (in either
direction) within a one minute period for the link to be considered
active.
Inactivity Time Feature - Timers Page of Settings Notebook
This information is provided to the Connection Server through values assigned
to two new fields on the Timers page of the Settings notebook. The two fields
are Inactivity timeout, which specifies the number of minutes of inactivity to
tolerate before causing a line disconnect, and Inactivity threshold, which
states the minimum number of frames that must cross an active link in a
minute.
The value of the Inactivity threshold field can be any number from 0 to 99999,
but the test for sufficient usage of the link is skipped if the value is 0.
Similarly, Inactivity timeout can have a value between 0 and 999, with 0
disabling the inactivity timeout feature. Each field is initially set to zero
when the Connection Server is first installed.
ΓòÉΓòÉΓòÉ 7.3.2. Additional Information ΓòÉΓòÉΓòÉ
When disconnected, the remote workstation displays a WCL0310 message. In this
version, no other indication is given to a user, and there is no warning that a
disconnection is imminent.
The values specified for Inactivity timeout and Inactivity threshold apply to
all connections made to that Connection Server. They may not be customized or
disabled for individual connections or ports.
The value chosen for Inactivity threshold should be selected very carefully.
The number of frames that cross the link during a passive connection where no
real work is being performed can vary considerably from installation to
installation. These values depend upon the type and configuration of the
attached LAN. as well as the application being used on the remote workstation.
The value chosen must be high enough so that a connection across an idle link
is broken, but set low enough that low-intensity applications doing real work
are not accidentally disconnected.
Experimentation is required for each LAN environment where this feature is
installed. A simple LAN Distance link, with the LAN parameters configured as
recommended in the LAN Distances documentation, should see 4-5 frames cross
each minute when no work is being done. This can be modified by the presence of
LAN Requestor or Communications Manager. It is also necessary to experiment
with the value of Inactivity threshold in the environment being used to
determine an acceptable value.
ΓòÉΓòÉΓòÉ 7.4. Setting Up a LAN Distance Port ΓòÉΓòÉΓòÉ
To begin port set up:
1. Open the Settings notebook and select the Ports tab.
The window shown in Settings Notebook, Ports Tab is displayed.
Settings Notebook, Ports Tab
2. Select the Add push button.
3. Select the type of port you want to add.
4. Select OK.
The ports you have already configured are displayed in the Configured ports
list box. Select a push button to perform an action for a port. Your changes
are saved when you close the Ports notebook. Shut down and restart your
workstation to activate your changes.
To add a port, select the Add push button.
To delete a port, select the port you want to delete, then select the Delete
push button.
If you delete an active port, it remains active until you stop its modem type
or you restart your workstation. If you delete a port that is the only port
assigned to a modem type, the modem type is deleted also.
Deleting a port also removes it from any phone book entry or answer mode to
which it was assigned. Your phone book entries and answer modes are not
disabled by removing the port; the LAN Distance product chooses any available,
compatible port when dialing or answering calls.
ΓòÉΓòÉΓòÉ 7.4.1. Setting Up a COM Port ΓòÉΓòÉΓòÉ
Use Asynchronous COM Port as a guide for configuring an asynchronous COM port.
Set up one LAN Distance port for every asynchronous modem attached to one of
your COM ports.
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Table 10. Asynchronous COM Port Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé TAB Γöé ENTRY FIELDS Γöé ACTIONS & INFORMATION Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé COM PORT Γöé COM PORT Γöé Select the COM port for the LAN Distance Γöé
Γöé Γöé Γöé port. Γöé
Γöé Γöé Γöé Γöé
Γöé Γöé Γöé All the COM ports installed on your Γöé
Γöé Γöé Γöé workstation are included in this list Γöé
Γöé Γöé Γöé box. Select a COM port that is not Γöé
Γöé Γöé Γöé already in use by the LAN Distance Γöé
Γöé Γöé Γöé product or another communications Γöé
Γöé Γöé Γöé product. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé COM PORT Γöé TRANSMIT FIFO Γöé Define the number of bytes that can be Γöé
Γöé (Optional Γöé SIZE Γöé transmitted at one time using the asyn- Γöé
Γöé fields) Γöé Γöé chronous FIFO support for your WAN Γöé
Γöé Γöé Γöé adapter. Γöé
Γöé Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Γöé RECEIVE FIFO Γöé Define the number of bytes that trigger Γöé
Γöé Γöé SIZE Γöé the asynchronous FIFO support for your Γöé
Γöé Γöé Γöé WAN adapter. Γöé
Γöé Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Γöé IRQ Γöé Define the interrupt level for this Γöé
Γöé Γöé Γöé port. Each COM port must be assigned a Γöé
Γöé Γöé Γöé unique interrupt level. Γöé
Γöé Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Γöé BASE ADDRESS Γöé Define the memory address where the COM Γöé
Γöé Γöé Γöé port is installed. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé COM PORT Γöé LINE TYPE Γöé Select whether the port uses a switched Γöé
Γöé Γöé Γöé or a leased line. Γöé
Γöé Γöé Switched Γöé Γöé
Γöé Γöé Γöé If you are setting up a COM port for a Γöé
Γöé Γöé Nonswitched Γöé NULL modem, select SWITCHED. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé NOTE: Default values for these optional fields are defined. Changing Γöé
Γöé default values could cause your LAN Distance connections to fail. Leave the Γöé
Γöé field blank to accept the default value. Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓòÉΓòÉΓòÉ 7.5. Setting Up Supported ARTIC Adapters ΓòÉΓòÉΓòÉ
An ARTIC adapter is an IBM multiport adapter card for asynchronous and
synchronous communications that supports up to eight ports. The LAN Distance
product supports these ARTIC adapters:
IBM Realtime Interface Co-Processor Multiport for workstations with AT
bus (non-micro channel) hardware. If you are using this ARTIC adapter,
complete these tasks:
- Creating a Co-Processor Parameter File
- Steps for Setting Up an ARTIC Adapter
- Steps for Setting Up an ARTIC Port
IBM Realtime Interface Co-processor PortMaster/A for micro channel
workstations.
If you are using this ARTIC adapter, complete these tasks:
- Steps for Setting Up an ARTIC Adapter
- Steps for Setting Up an ARTIC Port
ΓòÉΓòÉΓòÉ 7.5.1. Steps for Setting Up an ARTIC Adapter ΓòÉΓòÉΓòÉ
1. Open the Settings notebook and select the Ports tab (Settings Notebook,
Ports Tab).
2. From the Ports tab, select the Add push button.
Settings Notebook, Ports Tab
3. From the window shown in Port Type/Adapter Type Window, select the ARTIC
port type, then select the OK push button.
Port Type/Adapter Type Window
4. The pop-up information window (Pop-Up Window for ARTIC Ports) is
displayed if the statements required for ARTIC support are not in your
CONFIG.SYS file.
Select the OK push button to automatically add the following statements
to your CONFIG.SYS file.
device=[d:][\path\]ICARICIO.SYS
run=[d:][\path\]ICARICCT.EXE -C32
Pop-Up Window for ARTIC Ports
5. The pop-up information window (ICAPARM.PRM Pop-Up Window) is displayed.
If you are setting up an IBM Realtime Interface Co-processor
PortMaster/A adapter, you do not need to create the ICAPARM.PRM
file.
If you are setting up an IBM Realtime Interface Co-Processor
Multiport adapter, you must create an ICAPARM.PRM file as described
in Creating a Co-Processor Parameter File before you complete Steps
for Setting Up an ARTIC Port.
Select the OK push button to continue.
ICAPARM.PRM Pop-Up Window
6. Close the Settings notebook. Close the LAN Distance product and shut
down and restart your workstation to save the changes made to your
CONFIG.SYS file.
ΓòÉΓòÉΓòÉ 7.5.2. Steps for Setting Up an ARTIC Port ΓòÉΓòÉΓòÉ
Complete these steps for each port on your ARTIC adapter that you want to set
up to use the LAN Distance product.
1. Open the Settings notebook and select the Ports tab to complete set up
for your ARTIC ports.
2. From the Ports tab, select the Add push button to display the window
shown in the following figure is displayed.
3. Select the ARTIC port type and select the OK push button. The ARTIC tab
shown in ARTIC Tab, Page 1 of 2 is displayed.
4. From Page 1 of 2 of the ARTIC tab (ARTIC Tab, Page 1 of 2), make any
changes to the default configuration values.
For a description of the fields on these pages, select the Help push
button.
ARTIC Tab, Page 1 of 2
5. From Page 2 of 2 of the ARTIC tab, make any changes to default
configuration values.
For a description of the fields on these pages, select the Help push
button.
Select Close from the system menu icon to return to the Settings
notebook.
6. Close the Settings notebook to save your configuration changes. Shut down
and restart your workstation.
Use Configuring an ARTIC Port as a guide for setting up one port for an ARTIC
adapter.
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Table 11. Configuring an ARTIC Port Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé TAB Γöé ENTRY FIELDS Γöé ACTIONS & INFORMATION Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé ARTIC, PAGE 1 Γöé ARTIC CARD Γöé Select your ARTIC card number. Γöé
Γöé Γöé NUMBER Γöé Γöé
Γöé Γöé Γöé Use the value that was configured when Γöé
Γöé Γöé Γöé you installed your ARTIC adapter. The Γöé
Γöé Γöé Γöé ARTIC CARD TYPE field is updated after Γöé
Γöé Γöé Γöé you make your selection here. Γöé
Γöé Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Γöé ARTIC CARD Γöé Select a port number for the port. Γöé
Γöé Γöé PORT NUMBER Γöé Γöé
Γöé Γöé Γöé Your port numbers are displayed here Γöé
Γöé Γöé Γöé after you select your ARTIC CARD NUMBER. Γöé
Γöé Γöé Γöé Select a unique value for every port you Γöé
Γöé Γöé Γöé set up for this ARTIC adapter. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé ARTIC, PAGE 1 Γöé MAXIMUM Γöé This value is used to allocate buffer Γöé
Γöé (Optional Γöé RECEIVES Γöé space for receiving frames. Γöé
Γöé fields) Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Γöé MAXIMUM TRANS- Γöé Define the maximum number of Γöé
Γöé Γöé MITS Γöé TransmitChains that can be received from Γöé
Γöé Γöé Γöé higher layer before acknowledgement is Γöé
Γöé Γöé Γöé required. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé ARTIC, PAGE 1 Γöé LINE TYPE Γöé Select whether the port uses a switched Γöé
Γöé Γöé Γöé or a leased line. Γöé
Γöé Γöé Switched Γöé Γöé
Γöé Γöé Γöé Γöé
Γöé Γöé Nonswitched Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé ARTIC, PAGE 2 Γöé LINE PROTOCOL Γöé Select whether this is an asynchronous Γöé
Γöé Γöé Γöé or synchronous port. Γöé
Γöé Γöé Asynchronous Γöé Γöé
Γöé Γöé Γöé Γöé
Γöé Γöé Synchronous Γöé Γöé
Γöé Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Γöé CLOCKING Γöé Select whether clocking signals are gen- Γöé
Γöé Γöé Γöé erated by the adapter (internal) or the Γöé
Γöé Γöé Internal Γöé modem (external). Γöé
Γöé Γöé Γöé Γöé
Γöé Γöé External Γöé This field applies only to synchronous Γöé
Γöé Γöé Γöé connections. Γöé
Γöé Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Γöé LINE SPEED Γöé Specify the internal clocking line Γöé
Γöé Γöé Γöé speed. Γöé
Γöé Γöé Γöé Γöé
Γöé Γöé Γöé This field applies only to internal Γöé
Γöé Γöé Γöé clocking for a synchronous connection. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé NOTE: Default values for these optional fields are defined. Changing Γöé
Γöé default values could cause your LAN Distance connections to fail. Leave the Γöé
Γöé field blank to accept the default value. Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓòÉΓòÉΓòÉ 7.5.3. Setting Up Ports for Other Types of WAN Adapters ΓòÉΓòÉΓòÉ
Use this process to set up a LAN Distance port for:
IBM Wide Area Connector (WAC) Adapter
Multiport adapters other than the ARTIC adapter
Any other adapter not supported by the previous two port configuration
procedures
Ports for these adapters are configured through LAN Adapter Protocol Support
(LAPS), shown in LAPS Configure Workstation Window.
LAPS Configure Workstation Window
Use Ports Notebook, Other Tab as a guide for setting up a port through LAPS.
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Table 12. Ports Notebook, Other Tab Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé TAB OR WINDOW Γöé ENTRY FIELDS Γöé ACTIONS & INFORMATION Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé OTHER Γöé PORT TITLE Γöé View your port title. Γöé
Γöé Γöé Γöé Γöé
Γöé Γöé Γöé Select the LAPS push button to proceed Γöé
Γöé Γöé Γöé to the LAPS interface. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé CONFIGURE WORK- Γöé NETWORK Γöé Select your WAN adapter. Γöé
Γöé STATION WINDOW Γöé ADAPTERS Γöé Γöé
Γöé Γöé Γöé Select the ADD push button to add your Γöé
Γöé Γöé Γöé WAN adapter to the CURRENT CONFIGURATION Γöé
Γöé Γöé Γöé list box. Γöé
Γöé Γöé Γöé Γöé
Γöé Γöé Γöé The LAPS interface is not typically used Γöé
Γöé Γöé Γöé for configuring WAN adapters. Many of Γöé
Γöé Γöé Γöé the fields and actions are for setting Γöé
Γöé Γöé Γöé up LAN protocols and LAN adapters. Γöé
Γöé Γöé Γöé Ignore these items when you configure Γöé
Γöé Γöé Γöé your WAN adapter. Γöé
Γöé Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Γöé CURRENT CON- Γöé Identify your ports. Γöé
Γöé Γöé FIGURATION Γöé Γöé
Γöé Γöé (Required for Γöé If you are setting up ports for a multi- Γöé
Γöé Γöé a multiport Γöé port adapter, you must identify every Γöé
Γöé Γöé adapter) Γöé port on your adapter. For each port: Γöé
Γöé Γöé Γöé Γöé
Γöé Γöé Γöé 1. Select your multiport adapter from Γöé
Γöé Γöé Γöé the CURRENT CONFIGURATION list box. Γöé
Γöé Γöé Γöé 2. Select the EDIT push button. Γöé
Γöé Γöé Γöé 3. Specify values for: Γöé
Γöé Γöé Γöé o Slot number of card number Γöé
Γöé Γöé Γöé o Port number Γöé
Γöé Γöé Γöé o Port name displayed in the PPAT Γöé
Γöé Γöé Γöé table Γöé
Γöé Γöé Γöé 4. Select OK. Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓòÉΓòÉΓòÉ 7.5.4. Setting Up ISDN Ports ΓòÉΓòÉΓòÉ
The LAN Distance product and the IBM Communication Manager/2 product cannot use
your ISDN adapters simultaneously. When you configure an ISDN port for the LAN
Distance product, this port can be used only by the LAN Distance product.
Configure your ISDN adapter and the telephone numbers for its channels outside
the LAN Distance product before enabling your LAN Distance ISDN ports.
To enable your ISDN ports:
1. Open the Settings notebook and select the Ports tab.
2. Check Enable ISDN ports.
To change your ISDN configuration after enabling your LAN Distance ISDN ports:
1. Disable your LAN Distance ISDN ports.
2. Run your ISDN configuration program.
3. Re-enable your LAN Distance ISDN ports.
ΓòÉΓòÉΓòÉ 7.6. Setting Up for a WAC Adapter ΓòÉΓòÉΓòÉ
NOTE: The WAC Adapter must be configured through LAPS in LAN Distance. DO NOT
configure this adapter through LAPS outside of LAN Distance.
After installing the WAC Adapter, the ROM address will be displayed on your
screen while your workstation is restarting. Write this ROM address down and
enter it during LAPS configuration.
To configure the WAC Adapter:
1. Open the Settings notebook
2. Select the LAPS tab
3. Select LAPS
4. Edit or add the WAC adapter to the list of already-installed adapters.
5. On the WAC Adapter configuration panel, note the following items:
Enter the ROM address of the WAC Adapter recorded above.
For "Line Mode" enter 0 for Constant RTS.
For "MAC Type Description" enter HDLC.
When selecting NRZ vs NRZI, be consistent with the way you
configured your modem in LAN Distance. If you used V.35 connection,
select NRZ by entering 0 for No. If you used generic synchronous
switched or synchronous leased line, select NRZI by entering 1 for
Yes.
NOTE: You may also use NRZ for generic synchronous switched or
synchronous leased line. However, you must carefully configure LAN
Distance to use it:
- Edit WCLNET.INI after all other installations to change the
encoding scheme from NRZI to NRZ.
- Make changes in Settings notebook to Phonebook and Answer
Criteria
For synchronous switched:
-- In the Settings notebook Phonebook tab, select Add.
-- Select the Modem tab
-- Change the Encoding Scheme to NRZ.
For synchronous leased line:
-- In the Settings notebook Phonebook tab, select Add.
-- Select the Connect tab
-- Change the Encoding Scheme to NRZ.
-- In the Settings notebook Answer Criteria tab, select Add.
-- Select the Connect tab
-- Change the Encoding Scheme to NRZ.
For "ANDIS PCM Support" enter 1 for YES.
For "Slot Number" enter the slot number in which the adapter is
inserted.
For "Port Number" enter the port for which the adapter is
configured. The upper port is the one farthest from the system
board; the lower port is the one closest to the system board.
For "Link Connection type" enter 1 for switched or 0 for
non-switched (leased line) connections.
For "Portname displayed in the PPAT table" enter a name to identify
the adapter to the port connection manager.
Typically, you can use default values for the rest of the
parameters.
ΓòÉΓòÉΓòÉ 7.7. Configuring a Modem Type and Assigning Ports to a Modem Type ΓòÉΓòÉΓòÉ
Set up at least one configuration for every unique modem type on your
workstation. Associate your logical ports with your physical WAN hardware by
assigning each port to a modem type. A modem type can have multiple ports
assigned as long as the number of ports does not exceed the actual number of
modems of that type installed on your workstation.
Configuring the same modem type more than once gives you the flexibility to:
Control your ports individually.
Customize your modems differently.
Support different communication connections and line types with the same
modem type.
All the ports for a modem type are managed together. This means that they are
started and stopped as a group. If you want to maintain individual control
over your ports and they all use the same modem type, configure a separate
modem type for each port. You can use the same modem type configuration as a
model for each one.
To customize the configuration of one of your modems without modifying the
configuration for all the modems of that type, set up an additional modem
type. You can base your customized configuration on the configuration of the
original modem type.
All of the modems for a modem type must use the same connection and line type.
For example, if your workstation uses IBM 7855 modems to support both switched
and leased lines, configure two IBM 7855 modem types: one to support the
switched connection and the other to support the nonswitched connection.
To begin modem type configuration:
1. Open the LAN Distance Workstations window and select MyWorkstation.
2. Select Selected from the menu bar.
3. Select Open as and Settings.
4. Select the Modems tab.
The window shown in Settings Notebook, Modems Tab is displayed.
Settings Notebook, Modems Tab
The modem types already configured are displayed in the Modem type assignments
list box. Select a push button to perform an action for a modem type. Your
changes are saved when you close the Modems notebook. Restart the LAN
Distance product to start your new modem type and its ports.
Select Assign push button to set up a new modem type. Available Modem Types
Window shows the window displayed when you assign a new modem type. When you
configure a new modem type, you must specify one or more ports for it.
To assign ports to a previously configured modem type, select the Change push
button.
If you delete an active modem type, its ports remain active until you stop the
modem type or you restart the LAN Distance product. cannot be used to dial or
answer calls until they are assigned to another modem type.
Available Modem Types Window
Use Settings Notebook, Modems Tab as a guide for configuring a modem type.
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Table 13. Settings Notebook, Modems Tab Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé TAB Γöé ENTRY FIELDS Γöé ACTIONS & INFORMATION Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé MODEMS Γöé AVAILABLE Γöé Select a modem type. Γöé
Γöé Γöé MODEM TYPES Γöé Γöé
Γöé Γöé Γöé If your modem is not listed in the AVAILABLE Γöé
Γöé Γöé Γöé MODEM TYPES list box, see Using a Listed Modem Γöé
Γöé Γöé Γöé Type to Configure Your Asynchronous Modem.. Γöé
Γöé Γöé Γöé Γöé
Γöé Γöé Γöé The modems types that support both asynchro- Γöé
Γöé Γöé Γöé nous and synchronous connections are config- Γöé
Γöé Γöé Γöé ured for an asynchronous connection, see Using Γöé
Γöé Γöé Γöé Synchronous Modems and Leased Lines. Γöé
Γöé Γöé Γöé Γöé
Γöé Γöé Γöé Use the push buttons to add, change or delete Γöé
Γöé Γöé Γöé ports for the modem type. The Ports window of Γöé
Γöé Γöé Γöé the Modems notebook is displayed when you add Γöé
Γöé Γöé Γöé a port. Γöé
Γöé Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Γöé CREATE NEW Γöé Set up a new modem type. Γöé
Γöé Γöé ASYNCHRONOUS Γöé Γöé
Γöé Γöé MODEM TYPE Γöé Select a modem type to use as a template for Γöé
Γöé Γöé USING ABOVE AS Γöé creating a new modem type configuration for an Γöé
Γöé Γöé MODEL Γöé unlisted modem. Try to select a modem type Γöé
Γöé Γöé Γöé similar to your unlisted modem, or select a Γöé
Γöé Γöé Γöé generic modem type. Γöé
Γöé Γöé Γöé Γöé
Γöé Γöé Γöé To customize the configuration values for your Γöé
Γöé Γöé Γöé new modem type, see Modifying Modem Strings in Γöé
Γöé Γöé Γöé a LAN Distance PIF File. Γöé
Γöé Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Γöé NEW MODEM Γöé Specify a new modem title. Γöé
Γöé Γöé TITLE Γöé Γöé
Γöé Γöé Γöé If you are creating a new modem type, identify Γöé
Γöé Γöé Γöé it uniquely with a new modem title. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé PORTS, Γöé SWITCHED Γöé Specify the phone number of the modem for the Γöé
Γöé PAGE 1 Γöé Γöé port. Γöé
Γöé Γöé PHONE NUMBER Γöé Γöé
Γöé Γöé (Optional) Γöé The phone number identifies the specific modem Γöé
Γöé Γöé Γöé that your port uses. Γöé
Γöé Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Γöé NONSWITCHED Γöé Specify the name of the leased line for the Γöé
Γöé Γöé Γöé port. Γöé
Γöé Γöé PERMANENT CON- Γöé Γöé
Γöé Γöé NECTION NAME Γöé The name identifies the leased line that your Γöé
Γöé Γöé Γöé port uses. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé PORTS, Γöé AVAILABLE Γöé Select a port to assign to this modem type. Γöé
Γöé PAGE 2 Γöé PORTS Γöé Γöé
Γöé Γöé Γöé A list of previously configured ports is dis- Γöé
Γöé Γöé Γöé played. Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓòÉΓòÉΓòÉ 7.8. What to Do If Your Modem Is Not Listed ΓòÉΓòÉΓòÉ
The Available modem types field, shown in the Available Modem Types Window
table in Configuring a Modem Type and Assigning Ports to a Modem Type, lists
the modems that the LAN Distance product is already set up to support.
If your modem is not listed in Available modem types field, you can try to
configure it using the following methods:
1. Select a listed modem type that will work for your modem. Complete the
steps in Using a Listed Modem Type to Configure Your Asynchronous Modem.
Try step What to Do If Your Modem Is Not Listed or step What to Do If
Your Modem Is Not Listed only after you have tried using several of the
listed modem types to configure your unlisted modem.
2. Use the graphical Port/Modem utility to create a new modem type. See
Using the Port/Modem Utility.
3. Manually create a PIF file for your modem using the PIF file of a listed
modem as a template. See Creating a New PIF File for a Modem Not in the
List.
Note: If you try all of these steps and are still unable to establish a LAN
Distance connection, contact your designated support organization for
assistance.
ΓòÉΓòÉΓòÉ 7.9. Using a Listed Modem Type to Configure Your Asynchronous Modem ΓòÉΓòÉΓòÉ
Repeat these steps until you find a listed modem type with configuration values
that work for your modem, or until you have tried all the listed modem types.
1. If you have not already configured a port for your new modem type, see
Setting Up a LAN Distance Port.
2. Open the Settings notebook and select the Modems tab. Select the Assign
push button to begin configuring your modem type.
3. Try to select a similar modem type from Available modem types list box,
using one or more of the following strategies:
a) Select a modem type with the same manufacturer.
b) If your modem is compatible with a listed modem type, select the
compatible modem type.
c) Select the Asynchronous Switched Connection Modem type.
d) Select any other listed modem type.
4. Check Create new asynchronous modem type using above as model and specify
a new name for your modem type in the New modem titlefield.
5. Select OK to continue.
6. Select the Add push button to assign ports to your new modem type. See
Configuring a Modem Type and Assigning Ports to a Modem Type for more
information.
7. Close the Settings notebook to save your new modem type configuration.
8. Restarting the LAN Distance product starts your new modem type and the
ports assigned to it. To stop or start a modem type without stopping and
restarting the LAN Distance product:
a) Open the LAN Distance Workstations window.
b) Select MyWorkstation.
c) Select Selected from the menu bar.
d) Select Open as and Call and port management.
The Call and Port Management - Port View is displayed.
e) Select View from the menu bar.
f) Select Modem types to change your view to your modem types.
g) Select your new Modem Type Name.
h) Select Selected from the menu bar.
i) Select an action:
Stop hard
Start
9. Your modem type is successfully configured if you can establish a
connection, send and receive data, and disconnect the modem.
If you cannot communicate using your new modem type, delete it through
the Modems tab of the Settings notebook, and try another listed modem
type.
If you are not able to find a listed modem type that works for your modem
type, try customizing a PIF file. See Creating a New PIF File for a Modem Not
in the List for information about updating PIF files.
Note: Software, modems and other hardware can also cause connection
problems. Troubleshooting Tips for troubleshooting information. You
can also use a null modem to test the connection and the modems as
described in the following topic.
ΓòÉΓòÉΓòÉ 7.10. Setting Up a Null Modem to Test Your LAN Distance Connection ΓòÉΓòÉΓòÉ
You can set up a null modem cable to test the connection between two LAN
Distance workstations before setting up a modem by setting up one workstation
to answer calls and one workstation to dial out.
Alternatively, if you experience problems with a connection after your modems
are configured for the LAN Distance product, setting up a null modem cable is
one way to determine if your modems are configured and functioning correctly.
The line type (switched or nonswitched) setup for null modems is unique. Set
up requirements are summarized in Line Type Configuration Settings for Null
Modems.
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Table 14. Line Type Configuration Settings for Null Modems Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé NULL MODEM CONFIGURATION SETTINGS Γöé SWITCHED OR NONSWITCHED Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Ports Γöé Switched Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Modems Γöé Nonswitched Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Phone Book Γöé Nonswitched Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Answer criteria Γöé Nonswitched Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
Steps for setting up a null modem cable to test a connection between a LAN
Distance Connection Server and a LAN Distance Remote are described in the
following topics:
Setting Up a Null Modem to Answer Calls
Setting Up a Null Modem to Dial Out
ΓòÉΓòÉΓòÉ 7.10.1. Setting Up a Null Modem to Answer Calls ΓòÉΓòÉΓòÉ
Complete the following steps to set up a LAN Distance Connection Server to
answer calls:
1. From the Settings notebook, select the Ports tab.
2. From the Ports tab, delete any ports from the Configured ports field that
you plan to use for null modems. Select Add to begin port configuration.
3. From the Select an adapter type field, select the COM port adapter type.
Select OK to continue port configuration.
4. From the COM port tab, select Switched for the Line type. Select Close
from the system menu icon to return to the Ports tab in the Settings
notebook.
5. Select the Modems tab. Delete any modem types from the Assignments for
modem types field that you plan to use for null modems. Select Assign to
begin modem configuration.
6. From the Available modem types field, select the Null Modem. Select OK
to continue modem configuration.
7. From the Ports tab within Modems settings, select Add to assign a port to
the Null Modem.
8. From the Null Modem - Settings window, verify that the Nonswitched radio
button is selected.
Specify a name in the Permanent connection name field. The name you
specify for the LAN Distance Connection Server and LAN Distance Remote
must match. Select OK to continue modem configuration.
9. From the Available ports field, select the COM port you configured in
step 3. Select OK to return to the Ports tab.
10. Select Close from the system menu symbol to return to the Settings
notebook.
11. Select the Answer tab. Select the Add push button to set up your LAN
Distance Connection Server to answer calls.
12. From the Answer Mode Criteria - Settings window, select PSTN for the
Network type and select Nonswitched for the Line type. Select OK to
continue answer mode configuration.
13. From the Answer tab within Answer settings, type a name for the answer
mode in the Answer mode name field.
Check the Enable answer mode on startup field.
14. Select Close from the system menu symbol to return to the Settings
notebook.
15. Close the Settings notebook. Shut down and restart your workstation to
make these changes effective.
ΓòÉΓòÉΓòÉ 7.10.2. Setting Up a Null Modem to Dial Out ΓòÉΓòÉΓòÉ
Complete the following steps to set up a LAN Distance Remote or a LAN Distance
Connection Server to dial out.
1. Complete steps 1 - 10 in Setting Up a Null Modem to Answer Calls.
2. Select the Phone Book tab in the Settings notebook. Select the Add push
button to add a phone book entry for the Null Modem.
3. From the New Entry - Settings window, select PSTN for the Network type
and select Nonswitched for the Line type. Select OK to continue phone
book entry configuration.
4. From the Entry tab within Phone Book settings, type a name for the phone
book entry in the Entry name field.
5. Select the Connect tab in Phone Book settings. Verify the information in
the Modem and Leased line fields.
6. Select Close from the system menu symbol to return to the Phone Book tab
in the Settings notebook.
7. Close the Settings notebook. Shut down and restart your workstation to
make these changes effective.
8. Dial out from the LAN Distance Remote to the connection server to test
your null modem connection.
ΓòÉΓòÉΓòÉ 8. Setting Up the LAN Distance Bridge ΓòÉΓòÉΓòÉ
This chapter explains the routing methods the LAN Distance bridge supports for
Token-Ring and Ethernet LANs, describes how to set up the LAN Distance bridge
for Token-Ring and Ethernet LANs, and explains the automatic and custom
filtering capabilities of the LAN Distance bridge.
ΓòÉΓòÉΓòÉ 8.1. Overview of the LAN Distance Bridge ΓòÉΓòÉΓòÉ
The bridge component of the LAN Distance Connection Server product routes and
filters data frames from the LAN segment to the WAN segment and from the WAN
segment to the LAN segment. The LAN Distance bridge can be configured to route
Token-Ring or Ethernet data frames.
If your LAN Distance Connection Server is installed on a Token-Ring LAN,
see set up requirements described in Understanding Token-Ring Bridges.
If your LAN Distance Connection Server is installed on an Ethernet LAN,
see set up requirements described in Understanding Ethernet Bridges.
PPP client frames are routed and not bridged.
The LAN Distance Bridge
ΓòÉΓòÉΓòÉ 8.2. Understanding Token-Ring Bridges ΓòÉΓòÉΓòÉ
This section describes how Token-Ring LANs route data and tells you how to
define LAN Distance bridge configuration values for Token-Ring LANs.
ΓòÉΓòÉΓòÉ 8.2.1. Source Routing Required for the LAN Distance Token-Ring Bridge ΓòÉΓòÉΓòÉ
Token-Ring bridges can support transparent or source routing of data frames.
When the LAN Distance Connection Server is installed on a Token-Ring LAN, the
LAN Distance bridge requires source routing information to route Token-Ring
data frames on and off the LAN and WAN segments. Source routing information
consists of a sequence of LAN segment numbers and bridge numbers stored in the
routing information field of a Token-Ring data frame. When the LAN Distance
Connection Server is installed on a Token-Ring LAN, a bridge number is assigned
to the LAN Distance bridge and segment numbers are assigned to the LAN segment
and the WAN segment.
Complete these tasks to support Token-Ring source routing at the LAN Distance
bridge:
Verify that the LAN Distance bridge is enabled. See Enabling and
Disabling the LAN Distance Bridge.
Verify that automatic filtering is enabled at the LAN Distance bridge.
See Using the Automatic Filtering Feature.
To configure the LAN Distance bridge to handle Token-Ring data frames,
specify a LAN Distance bridge number, and segment numbers for the LAN and
the LAN Distance WAN segment. See Defining LAN Distance Bridge
Token-Ring Configuration Values.
The bridges and routers in your LAN environment must be configured to
support source routing.
If you are running applications over a LAN Distance connection that allow
you to configure a source routing option, such as Banyan VINES or
NetWare, configure the application so its data frames contain source
routing information.
Note: The Token-Ring LAN adapter installed on the LAN Distance Connection
Server must be supported by the LAN Distance product. See Local Area Network
Adapters for a list of supported adapters.
ΓòÉΓòÉΓòÉ 8.3. Defining LAN Distance Bridge Token-Ring Configuration Values ΓòÉΓòÉΓòÉ
The LAN Distance bridge is identified by a bridge number, a LAN segment ring
number, and a WAN segment ring number. These values must be customized for
your network environment. See Defining Configuration Values for the LAN
Distance Bridge.
Note: For help configuring LAN Distance bridge configuration values, use the
Bridge utility. The utility named CALLBRDG.EXE provides an aid to the LAN
Distance Connection Server administrator in determining the bridge and ring
(segment) numbers of a Token-Ring LAN attached to the LAN Distance Connection
Server. Refer to the WAL subdirectory for the CALLBRDG.RME file for a
description of this utility. The OS2PING tool can also be used to define LAN
Distance bridge configuration values, see Using OS2PING for Troubleshooting and
LAN Distance Bridge Configuration.
ΓòÉΓòÉΓòÉ 8.3.1. Overview of Multisegmented Token-Ring LAN Environments ΓòÉΓòÉΓòÉ
Your Token-Ring LAN is one of three types:
Unsegmented
Segmented with one or more bridges
Segmented with several bridges and multiple paths to some destinations
Your Token-Ring LAN environment is unsegmented if you have no bridges linking
one LAN segment to another LAN segment. Your Token-Ring LAN environment is
segmented if your LAN comprises more than one LAN segment, connected by
bridges.
Token-Ring LAN and LAN Distance Bridges
Unsegmented LANs
If your Token-Ring LAN is unsegmented, the LAN Distance Remote 1 in
Token-Ring LAN and LAN Distance Bridges most closely resembles your
environment. This workstation dials into LAN Distance Connection Server
1 to access LAN 1. This Token-Ring LAN has no other bridges; LAN
resources are directly attached to the LAN. If your Token-Ring LAN is
unsegmented, accept the LAN Distance default values for your LAN segment
ring number, bridge number, and hop counts.
Segmented LANs
If your Token-Ring LAN is segmented with several bridges, the LAN
Distance Remote 2 in Token-Ring LAN and LAN Distance Bridges most closely
resembles your environment. This workstation dials into LAN Distance
Connection Server 2 to access LAN 1. Modifying 3 bridge settings makes 2
of the bridges available to access LAN 2 and the 3270 Controller on LAN
2. When the LAN Distance bridge is configured with LAN segment ring
number F03, the LAN Distance Connection Server matches the other bridges.
When the LAN Distance bridge number is set to 3, the bridge number is
unique for the LAN Distance product. When the hop counts are set to 2,
the LAN Distance Remote can cross the LAN Distance and the F03 bridge.
Segmented, multipath LANs
If your LAN is segmented with several bridges and multiple paths,
configure your LAN Distance bridge very carefully. In Token-Ring LAN and
LAN Distance Bridges, 2 bridges have identical LAN segment ring numbers
(F03/B02). To differentiate these bridges, each bridge must be assigned
a unique bridge number. Also, LAN Distance Connection Server 2 must have
a unique LAN Distance bridge number.
If your Token-Ring LAN is segmented, but you do not want remote workstations
to access resources outside your LAN segment, configure a unique LAN segment
ring number for your LAN Distance bridge. This prevents other LAN segments
from sending frames over your LAN Distance WAN connections and prevents remote
workstations from communicating with any resources outside your LAN segment.
You can also enhance the performance of your LAN Distance wide area network by
placing your LAN Distance Connection Server on the LAN segment that contains
the resources required by remote workstations and then configuring the LAN
Distance bridge to access only resources on its own LAN segment.
ΓòÉΓòÉΓòÉ 8.3.2. Defining Configuration Values for the LAN Distance Bridge ΓòÉΓòÉΓòÉ
To begin configuring your LAN Distance bridge on a Token-Ring LAN, open the
Settings notebook and select the Bridge tab.
The first page of your LAN Distance bridge notebook, shown in Settings
Notebook, Bridge Tab is displayed.
Settings Notebook, Bridge Tab
Use Settings Notebook, Bridge Tab as a guide for modifying your LAN Distance
bridge configuration. Your changes are saved when you close the Bridge
Settings notebook.
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Table 15. Settings Notebook, Bridge Tab Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé TAB Γöé ENTRY FIELDS Γöé ACTIONS & INFORMATION Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé BRIDGE, Γöé LOAD BRIDGE Γöé This field must be checked to allow LAN Dis- Γöé
Γöé PAGE 1 Γöé SUPPORT Γöé tance Remotes to access LAN resources on Γöé
Γöé Γöé Γöé Token-Ring and Ethernet LANs. Γöé
Γöé Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Γöé ENABLE AUTO- Γöé This field must be checked if you want the LAN Γöé
Γöé Γöé MATIC FIL- Γöé Distance product to use automatic filtering. Γöé
Γöé Γöé TERING Γöé Γöé
Γöé Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Γöé BRIDGE NUMBER Γöé Assign a number to the LAN Distance bridge. Γöé
Γöé Γöé Γöé Γöé
Γöé Γöé Γöé Your bridge number, LAN segment ring number, Γöé
Γöé Γöé Γöé and WAN segment ring number combine to form a Γöé
Γöé Γöé Γöé route designator for your LAN data frames. Γöé
Γöé Γöé Γöé The route designator must be unique on your Γöé
Γöé Γöé Γöé LAN Distance wide area network. One way to Γöé
Γöé Γöé Γöé make sure it is unique is to assign different Γöé
Γöé Γöé Γöé bridge numbers to each of the LAN Distance Γöé
Γöé Γöé Γöé bridges in your system. Γöé
Γöé Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Γöé MAXIMUM DATA Γöé Specify the largest data unit that can be Γöé
Γöé Γöé UNIT SIZE Γöé transmitted by the LAN Distance bridge. Γöé
Γöé Γöé Γöé Γöé
Γöé Γöé Γöé If your LAN Distance bridge receives a data Γöé
Γöé Γöé Γöé frame that exceeds this size, the frame is Γöé
Γöé Γöé Γöé discarded. Γöé
Γöé Γöé Γöé Γöé
Γöé Γöé Γöé o A large data frame incurs less overhead Γöé
Γöé Γöé Γöé for the amount of data being transmitted, Γöé
Γöé Γöé Γöé so it might be transmitted faster than a Γöé
Γöé Γöé Γöé set of smaller frames. Γöé
Γöé Γöé Γöé o WAN transmission errors might occur on Γöé
Γöé Γöé Γöé large data frames. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé BRIDGE, Γöé LAN SEGMENT Γöé Assign a ring number for the LAN Distance Γöé
Γöé PAGE 2 Γöé RING NUMBER Γöé bridge LAN segment. Γöé
Γöé Γöé Γöé Γöé
Γöé Γöé Γöé This number is the ring number of the LAN Γöé
Γöé Γöé Γöé segment on which your LAN Distance Connection Γöé
Γöé Γöé Γöé Server resides. Γöé
Γöé Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Γöé MAXIMUM NUMBER Γöé Specify the number of bridges a data frame can Γöé
Γöé Γöé OF NETWORK Γöé cross. Γöé
Γöé Γöé BRIDGE HOPS Γöé Γöé
Γöé Γöé Γöé Restrict the number of network segments that a Γöé
Γöé Γöé Γöé data frame can traverse before it reaches its Γöé
Γöé Γöé Γöé destination. A network segment hop occurs at Γöé
Γöé Γöé Γöé every bridge on your LAN, including the LAN Γöé
Γöé Γöé Γöé Distance bridge. If the LAN Distance bridge Γöé
Γöé Γöé Γöé detects that a frame has exceeded the config- Γöé
Γöé Γöé Γöé ured hop count, it discards the frame. Γöé
Γöé Γöé Γöé Γöé
Γöé Γöé Γöé Set your hop count high enough for the data Γöé
Γöé Γöé Γöé from your remote workstations to reach its Γöé
Γöé Γöé Γöé destination. Your LAN and WAN hop counts Γöé
Γöé Γöé Γöé should be the same. Γöé
Γöé Γöé Γöé Γöé
Γöé Γöé Γöé You can use hop counts to limit the trans- Γöé
Γöé Γöé Γöé mission of LAN data frames to a certain Γöé
Γöé Γöé Γöé geographic area. For example, setting your Γöé
Γöé Γöé Γöé hop count to 1 allows only frames from LAN Γöé
Γöé Γöé Γöé workstations on your LAN Distance Connection Γöé
Γöé Γöé Γöé Server's LAN to be forwarded onto your wide Γöé
Γöé Γöé Γöé area connections. Γöé
Γöé Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Γöé ACTIVE LAN Γöé View the active filtering criteria. Γöé
Γöé Γöé FILTER Γöé Γöé
Γöé Γöé Γöé One set of LAN segment filtering criteria can Γöé
Γöé Γöé Γöé be active at a time. Activate a set of fil- Γöé
Γöé Γöé Γöé tering criteria by selecting it in the LAN Γöé
Γöé Γöé Γöé segment filter criteria list box. Γöé
Γöé Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Γöé LAN SEGMENT Γöé Establish LAN segment filtering criteria. Γöé
Γöé Γöé FILTER CRI- Γöé Γöé
Γöé Γöé TERIA Γöé Use the push buttons to add, change, or delete Γöé
Γöé Γöé Γöé filtering criteria. See Types of Filtering Γöé
Γöé Γöé Γöé Supported for the LAN Distance Bridge. Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Table 15. Settings Notebook, Bridge Tab Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé TAB Γöé ENTRY FIELDS Γöé ACTIONS & INFORMATION Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé BRIDGE, Γöé WAN SEGMENT Γöé Assign a ring number for the LAN Distance Γöé
Γöé PAGE 3 Γöé RING NUMBER Γöé bridge's WAN segment. Γöé
Γöé Γöé Γöé Γöé
Γöé Γöé Γöé Your WAN segment ring number must be different Γöé
Γöé Γöé Γöé from your LAN segment ring number. Otherwise, Γöé
Γöé Γöé Γöé your WAN segment ring number can be any value Γöé
Γöé Γöé Γöé as long as it helps create a unique route des- Γöé
Γöé Γöé Γöé ignator. Γöé
Γöé Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Γöé MAXIMUM NUMBER Γöé Specify the number of bridges a data frame can Γöé
Γöé Γöé OF NETWORK Γöé cross. Γöé
Γöé Γöé BRIDGE HOPS Γöé Γöé
Γöé Γöé Γöé Restrict the number of network segments that a Γöé
Γöé Γöé Γöé data frame can cross before it reaches its Γöé
Γöé Γöé Γöé destination. Your LAN and WAN hop counts Γöé
Γöé Γöé Γöé should be the same. Γöé
Γöé Γöé Γöé Γöé
Γöé Γöé Γöé You can use hop counts to filter LAN traffic Γöé
Γöé Γöé Γöé by limiting transmission of data to a certain Γöé
Γöé Γöé Γöé geographic area. For example, prevent your Γöé
Γöé Γöé Γöé remote users from accessing other workstations Γöé
Γöé Γöé Γöé on your LAN by setting your hop count to 0. Γöé
Γöé Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Γöé ACTIVE WAN Γöé View the active filtering criteria. Γöé
Γöé Γöé FILTER Γöé Γöé
Γöé Γöé Γöé One set of LAN segment filtering criteria can Γöé
Γöé Γöé Γöé be active at a time. Activate a set of fil- Γöé
Γöé Γöé Γöé tering criteria by selecting it in the LAN Γöé
Γöé Γöé Γöé SEGMENT FILTER CRITERIA list box. Γöé
Γöé Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Γöé WAN SEGMENT Γöé Establish WAN segment filtering criteria. Γöé
Γöé Γöé FILTER CRI- Γöé Γöé
Γöé Γöé TERIA Γöé Use the push buttons to add, change, or delete Γöé
Γöé Γöé Γöé filtering criteria. See Types of Filtering Γöé
Γöé Γöé Γöé Supported for the LAN Distance Bridge. Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓòÉΓòÉΓòÉ 8.4. Understanding Ethernet Bridges ΓòÉΓòÉΓòÉ
Ethernet LANs support transparent routing of data frames. When the LAN Distance
bridge is operating in an Ethernet environment, the LAN Distance bridge
functions as a transparent bridge. Transparent bridges process each data frame,
comparing the source and destination address for the data frame to the source
and destination routing tables maintained at the LAN Distance bridge. Because
each data frame is processed, transparent bridging is CPU intensive.
Complete these steps to support Ethernet transparent routing at the LAN
Distance bridge:
Verify that the LAN Distance bridge is enabled. See Enabling and
Disabling the LAN Distance Bridge.
From the Address tab in the Setting notebook, select the Ethernet radio
button from the LAN type field.
If you are setting up the LAN Distance Connection Server product on an
Ethernet LAN, a dedicated workstation for the LAN Distance Connection
Server is recommended. See Select a Dedicated or Nondedicated
Workstation.
Verify that automatic filtering is enabled at the LAN Distance bridge.
See Using the Automatic Filtering Feature.
When you install the LAN Distance Connection Server on a Ethernet LAN,
source routing information, segment ring numbers and bridge numbers, are
not required.
Note: The Ethernet LAN adapter installed on the LAN Distance Connection
Server must be supported by the LAN Distance product. See Local Area Network
Adapters for a list of supported adapters.
ΓòÉΓòÉΓòÉ 8.5. Enabling and Disabling the LAN Distance Bridge ΓòÉΓòÉΓòÉ
The LAN Distance bridge function can be enabled and disabled from the Bridge
tab in the Settings notebook. When you install the LAN Distance Connection
Server, the Load bridge support field on the Bridge tab is enabled. To make
this default setting active, simply open and close the Settings notebook.
To disable the LAN Distance bridge on your LAN Distance Connection Server:
1. Open the Settings notebook and select the Bridge tab, shown in Defining
Configuration Values for the LAN Distance Bridge.
2. From the Bridge tab, uncheck the Load bridge support check box.
3. To make this change take effect, close the LAN Distance product, shut
down then restart your workstation.
ΓòÉΓòÉΓòÉ 8.6. Ethernet Bridge Configuration Considerations ΓòÉΓòÉΓòÉ
You do not need to configure an Ethernet Bridge if all your remote access
clients are PPP clients.
If you configure an Ethernet Bridge through the LAN Distance Settings notebook,
Settings modifies PROTOCOL.INI as follows:
Replacing the Ethernet adapter in the Bindings statements for NetBEUI and
TCPBEUI with the LAN Distance logical adapter.
Modifying and deleting statements in the NetBIOS section based on changes
to the Bindings statements for NetBEUI and TCPBEUI.
This reconfiguration may affect your LAN Server configuration.
The following example demonstrates how your LAN Server configuration could be
affected by the configuration of an Ethernet bridge.
Your system was configured as follows prior to configuring the Ethernet
bridge.
The MPTS adapters and protocols configuration panel displays the
following:
IBM LAN Adapter for Ethernet [IBMENI.OS2] ...
0 - IBM OS/2 NetBIOS
0 - IBM TCP/IP
2 - IBM OS/2 NetBIOS over TCP/IP
LAN Distance Logical Adapter ...
1 - IBM TCP/IP
1 - IBM OS/2 NetBIOS
The networks section in the LAN Server configuration file, IBMLAN.INI,
contains the following statements:
net1 = NETBEUI$,0,LM10,34,70,14
net2 = NETBEUI$,1,LM10,34,70,14
net3 = TCPBEUI$,2,LM10,34,70,14
After configuring the Ethernet bridge, you system is configured as follows:
The MPTS adapters and protocols configuration panel displays the
following:
LAN Distance Logical Adapter ...
0 - IBM OS/2 NetBIOS
2 - IBM OS/2 NetBIOS over TCP/IP
1 - IBM TCP/IP
IBM LAN Adapter for Ethernet [IBMENI.OS2] ...
0 - IBM TCP/IP
0 - [SR_BRIDGE]
[BRIDGEFH] ...
1 - [SR_BRIDGE]
The networks section in the LAN Server configuration file, IBMLAN.INI,
still contains the following statements:
net1 = NETBEUI$,0,LM10,34,70,14
net2 = NETBEUI$,1,LM10,34,70,14
net3 = TCPBEUI$,2,LM10,34,70,14
With this configuration, you get the following error when you shutdown and
reboot the system:
NET3406: An error occurred while opening network device drive
net2=NETBEUI$
NET3411: There was an error installing NETWKSTA.200.
To fix your configuration, you must step through the "LAN Services Adapters"
component configuration panels in the "OS/2 LAN Services
Installation/Configuration" program in the "OS/2 LAN Services" folder. When
you get to the "Adapter and Protocol Configuration" panel, add the IBM OS/2
NetBIOS and IBM OS/2 NetBIOS over TCP/IP back under the Ethernet adapter.
If you do not make any changes in the protocol and adapters configuration
panel, the program corrects the IBMLAN.INI file based on your current adapter
and protocol configuration when you "Apply the changes". However, remote
clients will not be able to access resources on your LAN for those networks
that are removed.
When you are done configuring LAN Services, your IBMLAN.INI file should remain
the same.
The MPTS adapters and protocols configuration panel displays the following:
IBM LAN Adapter for Ethernet [IBMENI.OS2] ...
0 - IBM OS/2 NetBIOS
0 - IBM TCP/IP
2 - IBM OS/2 NetBIOS over TCP/IP
0 - [SR_BRIDGE]
LAN Distance Logical Adapter ...
1 - IBM TCP/IP
1 - IBM OS/2 NetBIOS
[BRIDGEFH] ...
1 - [SR_BRIDGE]
ΓòÉΓòÉΓòÉ 8.7. Types of Filtering Supported for the LAN Distance Bridge ΓòÉΓòÉΓòÉ
Filtering is an important performance feature of the LAN Distance product. The
ability to filter data frames at the LAN Distance bridge prevents LAN data
frames from saturating the slower LAN Distance WAN connection and degrading its
performance. The LAN Distance product supports two types of filtering:
automatic and customized. applications and LAN Distance environments. If you
are setting up a LAN-to-LAN environment or using special applications, you can
customize filtering criteria to meet your requirements.
The following restrictions apply to the automatic filtering function:
Automatic filtering is not supported for a LAN Distance Remote set up as
a stand-alone server, such as a LAN Server or a Database/2 Server.
Disable automatic filtering if this restriction applies to your LAN
Distance setup.
Automatic filtering is not supported for the LAN-to-LAN environment. If
the answer mode for your port is set up for a LAN-to-LAN connection,
automatic filtering will not work. To deactivate the LAN-to-LAN feature
for an answer mode, simply uncheck the LAN-to-LAN connection check box.
Step Setting Up LAN Distance Connection Servers to Establish a LAN-to-LAN
Connection in Setting Up LAN Distance Connection Servers to Establish a
LAN-to-LAN Connection tells how to access this check box.
When automatic filtering is enabled, NetBIOS broadcast datagrams are not
forwarded to the LAN Distance Remotes. For example, a LAN
Server/Requester command of "NET SEND * HELLO WORLD" is not forwarded by
the LAN Distance bridge.
ΓòÉΓòÉΓòÉ 8.7.1. Using the Automatic Filtering Feature ΓòÉΓòÉΓòÉ
Automatic filtering is enabled on the LAN Distance Connection Server when you
install the LAN Distance product. each LAN Distance Remote that dials in to a
LAN Distance Connection Server. Automatic filtering is supported for the
NDIS-compliant protocols supported by the LAN Distance product.
ΓòÉΓòÉΓòÉ 8.7.1.1. How Automatic Filtering Works ΓòÉΓòÉΓòÉ
Automatic filtering works by screening data frames based on protocol-specific
criteria. Unique screening criteria is used for different protocol types.
For example, a LAN Distance Remote running LAN Requester sends out data frames
containing NetBIOS source names. The NetBIOS source name identifies the LAN
Server receiving data frames. The automatic filtering function maintains a
list of the NetBIOS source names received from the LAN Distance Remote and only
forwards data frames from these NetBIOS source names.
ΓòÉΓòÉΓòÉ 8.7.1.2. Disabling Automatic Filtering ΓòÉΓòÉΓòÉ
When automatic filtering is enabled, it applies to all ports configured for the
LAN Distance product. Automatic filtering is disabled when the Enable
automatic filtering check box on page 1 of 3 of the Bridge notebook is not
checked.
Note: Automatic filtering is disabled for ports that have answer modes
configured to accept LAN-to-LAN connections.
ΓòÉΓòÉΓòÉ 8.7.2. Customizing Filtering Criteria ΓòÉΓòÉΓòÉ
Customized filtering gives you the capability to define separate filtering
criteria for the WAN and LAN segments of your LAN Distance wide area network.
Data frames from the LAN and WAN segments are forwarded or rejected at the LAN
Distance bridge based on the filtering criteria you define. This advanced
filtering capability requires gathering information for the supported filtering
types that you want to use.
The custom filtering criteria that you define applies to all ports on the LAN
Distance Connection Server, including the ports that you have set up for
automatic filtering.
LAN segment filter criteria filters data frames sent to the WAN segment
from workstations or resources on a LAN segment. Define LAN segment
filter criteria on page 2 of 3 of the Bridge notebook.
WAN segment filter criteria filters data frames sent to the LAN from LAN
Distance Remotes on your WAN segment. Define WAN segment filter criteria
on page 3 of 3 of the Bridge notebook.
ΓòÉΓòÉΓòÉ 8.7.2.1. Defining Filter Criteria for a Filter Name ΓòÉΓòÉΓòÉ
Each set of WAN or LAN filter criteria that you define is identified by a
filter name. More than one filter name can be created for your WAN and LAN
segments, but only one filter name for the LAN segment and one filter name for
the WAN segment can be active.
You can define multiple filter types when you create a filter name, or you can
create a filter name using only one filter type. The LAN Distance bridge
supports the following filter types:
Source addresses
Range of source addresses
Bit mask destination address
Service Access Point (SAP)
NetBIOS names
ΓòÉΓòÉΓòÉ 8.7.2.2. Creating a Filter Name Using Only One Filter Type ΓòÉΓòÉΓòÉ
When you create a filter name using only one filter type, a logical OR is
always applied to each of the criteria that you define for the filter type.
This is true for the filter types that contain lists: source addresses, SAPs,
and NetBIOS names.
For example, if you define 4 source addresses for a filter name, data frames
are forwarded by the LAN Distance bridge that match source address 1, OR source
address 2, OR source address 3, OR source address 4.
ΓòÉΓòÉΓòÉ 8.7.2.3. Creating a Filter Name Using Multiple Filter Types ΓòÉΓòÉΓòÉ
If you define more than one type of filter criteria for a filter name, you can
apply a logical OR or AND to the different filter types.
ΓòÉΓòÉΓòÉ 8.7.2.3.1. Applying Logical OR to Different Filter Types ΓòÉΓòÉΓòÉ
This is the default setting for this option. When the Apply logical OR to
bridge filter criteria check box is selected, a logical OR is applied to the
criteria defined between different filter types.
For example, if you define an acceptable range of source addresses and 2
additional source addresses for a filter name, data frames are forwarded by the
LAN Distance bridge that fall within the source address range OR that match
source address 1 or source address 2.
ΓòÉΓòÉΓòÉ 8.7.2.3.2. Applying Logical AND to Different Filter Types ΓòÉΓòÉΓòÉ
When the Apply logical OR to bridge filter criteria check box is not checked, a
logical AND is applied to criteria defined between different filter types.
For example, if you define an acceptable range of source addresses and 5
NetBIOS names for a filter name, data frames are forwarded by the LAN Distance
bridge that fall within the source address range AND that match at least 1 OR
more of the 5 NetBIOS names.
ΓòÉΓòÉΓòÉ 8.8. Setting Up Filtering Criteria for the LAN and WAN Segments ΓòÉΓòÉΓòÉ
To begin setting up filtering criteria for either your LAN or WAN segment:
1. Select Settings and select the Bridge tab.
2. Go to Page 2 or Page 3 to set up filtering criteria for your LAN or WAN
segment.
The window for the LAN Segment page of the Bridge notebook is shown in Bridge
Tab, Page 2 of 3.
Bridge Tab, Page 2 of 3
Select a push button to perform an action for your filtering criteria. Your
changes are saved when you close the Bridge notebook, and activated after you
shut down and restart your workstation.
Only one set of filtering criteria can be active at a time; however, you can
combine different types of filtering criteria, such as SAPs and NetBIOS names,
in one set. To activate a set of filtering criteria, select it from the
filtering criteria list box for the LAN or WAN segment.
Use Filtering Criteria as a guide for setting up your filtering criteria. This
table applies to setting up filtering criteria for your LAN and WAN segments.
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Table 16. Filtering Criteria Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé TAB Γöé ENTRY FIELDS Γöé ACTIONS & INFORMATION Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé NAME Γöé FILTER NAME Γöé Specify a name for this set of filtering cri- Γöé
Γöé Γöé Γöé teria. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé SAPS Γöé ACCEPT FRAMES Γöé Specify if and how source SAPs should be used Γöé
Γöé Γöé FROM THE SPEC- Γöé for filtering LAN data. Γöé
Γöé Γöé IFIED SAPS Γöé Γöé
Γöé Γöé Γöé Configure your LAN Distance bridge to accept Γöé
Γöé Γöé REJECT ALL Γöé or reject data frames from the SAPS specified Γöé
Γöé Γöé FRAMES FROM Γöé in CURRENT SAP FILTERS. Γöé
Γöé Γöé THE SPECIFIED Γöé Γöé
Γöé Γöé SAPS Γöé For example, to disallow certain LAN protocols Γöé
Γöé Γöé Γöé from participating in your LAN Distance wide Γöé
Γöé Γöé NO SOURCE SAP Γöé area network, select the REJECT radio button Γöé
Γöé Γöé FILTERING Γöé and specify those SAPs in your LAN segment Γöé
Γöé Γöé Γöé filtering criteria. This prevents frames from Γöé
Γöé Γöé Γöé those SAPs from being transmitted over your Γöé
Γöé Γöé Γöé wide area connections. On the other hand, if Γöé
Γöé Γöé Γöé you want to support only a certain set of LAN Γöé
Γöé Γöé Γöé protocols remotely, select the ACCEPT radio Γöé
Γöé Γöé Γöé button in the filtering criteria for your WAN Γöé
Γöé Γöé Γöé segment and specify the LAN protocols whose Γöé
Γöé Γöé Γöé frames you will accept. Γöé
Γöé Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Γöé CURRENT SAP Γöé Specify the names of the source SAPs to use Γöé
Γöé Γöé FILTERS Γöé for filtering. Γöé
Γöé Γöé Γöé Γöé
Γöé Γöé Γöé Use the push buttons to add, change, or delete Γöé
Γöé Γöé Γöé source SAPs for your filtering criteria. Γöé
Γöé Γöé Γöé Γöé
Γöé Γöé Γöé Source SAPs for some common LAN protocols are: Γöé
Γöé Γöé Γöé Γöé
Γöé Γöé Γöé SNA x'04', unless reconfigured Γöé
Γöé Γöé Γöé TCP/IP x'AA' Γöé
Γöé Γöé Γöé NETBIOS x'F0' Γöé
Γöé Γöé Γöé NETWARE** x'E0' Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Table 16. Filtering Criteria Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé TAB Γöé ENTRY FIELDS Γöé ACTIONS & INFORMATION Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé ADDRESSES, Γöé ACCEPT FRAMES Γöé Specify if and how source LAN Distance logical Γöé
Γöé PAGE 1 Γöé FROM THE SPEC- Γöé adapter network addresses should be used for Γöé
Γöé Γöé IFIED SOURCE Γöé filtering LAN data. Γöé
Γöé Γöé ADDRESSES Γöé Γöé
Γöé Γöé Γöé Configure your LAN Distance bridge to accept Γöé
Γöé Γöé REJECT ALL Γöé or reject data frames from the workstations Γöé
Γöé Γöé FRAMES FROM Γöé with the LAN Distance logical adapter network Γöé
Γöé Γöé THE SPECIFIED Γöé addresses specified in CURRENT ADDRESS Γöé
Γöé Γöé SOURCE Γöé FILTERS. The LAN Distance bridge compares the Γöé
Γöé Γöé ADDRESSES Γöé source address (SA) field of data frames to Γöé
Γöé Γöé Γöé the LAN Distance logical adapter network Γöé
Γöé Γöé NO SOURCE Γöé addresses in your filtering criteria. Γöé
Γöé Γöé ADDRESS FIL- Γöé Γöé
Γöé Γöé TERING Γöé For example, to allow only certain work- Γöé
Γöé Γöé Γöé stations to access your LAN remotely, select Γöé
Γöé Γöé Γöé the ACCEPT radio button in the filtering cri- Γöé
Γöé Γöé Γöé teria for your WAN segment and list the LAN Γöé
Γöé Γöé Γöé Distance logical adapter network addresses of Γöé
Γöé Γöé Γöé the remote workstations. Γöé
Γöé Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Γöé CURRENT Γöé Specify the LAN Distance logical adapter Γöé
Γöé Γöé ADDRESS Γöé network addresses of the source workstations Γöé
Γöé Γöé FILTERS Γöé to use for filtering. Γöé
Γöé Γöé Γöé Γöé
Γöé Γöé Γöé Use the push buttons to add, change, or delete Γöé
Γöé Γöé Γöé source workstations for your filtering cri- Γöé
Γöé Γöé Γöé teria. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé ADDRESSES, Γöé ACCEPT FRAMES Γöé Specify if and how a source LAN Distance Γöé
Γöé PAGE 2 Γöé FROM THE Γöé logical adapter network address range should Γöé
Γöé Γöé ADDRESSES Γöé be used for filtering LAN data. Γöé
Γöé Γöé WITHIN THE Γöé Γöé
Γöé Γöé SOURCE ADDRESS Γöé Configure your LAN Distance bridge to accept Γöé
Γöé Γöé RANGE Γöé or reject data frames from the workstations Γöé
Γöé Γöé Γöé with LAN Distance logical adapter network Γöé
Γöé Γöé REJECT ALL Γöé addresses in the range specified in CURRENT Γöé
Γöé Γöé FRAMES FROM Γöé ADDRESS FILTERS. Γöé
Γöé Γöé THE ADDRESSES Γöé Γöé
Γöé Γöé WITHIN THE Γöé Γöé
Γöé Γöé SOURCE ADDRESS Γöé Γöé
Γöé Γöé RANGE Γöé Γöé
Γöé Γöé Γöé Γöé
Γöé Γöé NO SOURCE Γöé Γöé
Γöé Γöé ADDRESS RANGE Γöé Γöé
Γöé Γöé FILTERING Γöé Γöé
Γöé Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Γöé CURRENT Γöé Specify the source LAN Distance logical Γöé
Γöé Γöé ADDRESS Γöé adapter network address range to use for fil- Γöé
Γöé Γöé FILTERS Γöé tering. Γöé
Γöé Γöé Γöé Γöé
Γöé Γöé Γöé Use the push buttons to add, change, or delete Γöé
Γöé Γöé Γöé a source address range for your filtering cri- Γöé
Γöé Γöé Γöé teria. Specify the range by its lower and Γöé
Γöé Γöé Γöé upper limits. Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Table 16. Filtering Criteria Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé TAB Γöé ENTRY FIELDS Γöé ACTIONS & INFORMATION Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé ADDRESSES, Γöé FORWARD FRAMES Γöé Specify if and how a destination address bit Γöé
Γöé PAGE 3 Γöé TO THE Γöé mask should be used for filtering LAN data. Γöé
Γöé Γöé ADDRESSES Γöé Γöé
Γöé Γöé WHICH MATCH Γöé Configure your LAN Distance bridge to accept Γöé
Γöé Γöé THE BIT MASK Γöé or reject data frames whose destination Γöé
Γöé Γöé Γöé address (DA) matches a bit mask specified in Γöé
Γöé Γöé FILTER OUT ALL Γöé BIT MASK. Use bit masks to filter data by Γöé
Γöé Γöé FRAMES TO THE Γöé functional addresses, especially those Γöé
Γöé Γöé ADDRESSES Γöé addresses generated by specialized applica- Γöé
Γöé Γöé WHICH MATCH Γöé tions. Γöé
Γöé Γöé THE BIT MASK Γöé Γöé
Γöé Γöé Γöé Γöé
Γöé Γöé NO DESTINATION Γöé Γöé
Γöé Γöé ADDRESS BIT Γöé Γöé
Γöé Γöé MASK FILTERING Γöé Γöé
Γöé Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Γöé BIT MASK Γöé Specify a bit mask to use for filtering desti- Γöé
Γöé Γöé Γöé nation addresses. Γöé
Γöé Γöé Γöé Γöé
Γöé Γöé Γöé Use bit masks for functional address fil- Γöé
Γöé Γöé Γöé tering. The destination address (DA) field of Γöé
Γöé Γöé Γöé data frames is compared to your bit mask. A Γöé
Γöé Γöé Γöé match is found if any of the bits set to 1 in Γöé
Γöé Γöé Γöé the bit mask are also set to 1 in your desti- Γöé
Γöé Γöé Γöé nation address field. Γöé
Γöé Γöé Γöé Γöé
Γöé Γöé Γöé Bit masks for some common functional addresses Γöé
Γöé Γöé Γöé are: Γöé
Γöé Γöé Γöé Γöé
Γöé Γöé Γöé NETBIOS x'C00000000080' Γöé
Γöé Γöé Γöé LAN MANAGER* x'C00000002000' Γöé
Γöé Γöé Γöé USER-DEFINED x'C00000080000' through Γöé
Γöé Γöé Γöé x'C00040000000' Γöé
Γöé Γöé Γöé Γöé
Γöé Γöé Γöé Use the push buttons to add, change, or delete Γöé
Γöé Γöé Γöé destination address bit masks for your fil- Γöé
Γöé Γöé Γöé tering criteria. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé NETBIOS Γöé ACCEPT FRAMES Γöé Specify if and how NetBIOS names should be Γöé
Γöé Γöé WITH THE SPEC- Γöé used for filtering LAN data. Γöé
Γöé Γöé IFIED NETBIOS Γöé Γöé
Γöé Γöé NAMES Γöé Γöé
Γöé Γöé Γöé Γöé
Γöé Γöé FILTER OUT ALL Γöé Γöé
Γöé Γöé FRAMES WITH Γöé Γöé
Γöé Γöé THE SPECIFIED Γöé Γöé
Γöé Γöé NETBIOS NAMES Γöé Γöé
Γöé Γöé Γöé Γöé
Γöé Γöé NO NETBIOS Γöé Γöé
Γöé Γöé NAME FILTERING Γöé Γöé
Γöé Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Γöé CURRENT NAME Γöé Specify NetBIOS names to use for filtering. Γöé
Γöé Γöé FILTERS Γöé Γöé
Γöé Γöé Γöé An example of a NetBIOS name is one defined in Γöé
Γöé Γöé Γöé an IBMLAN.INI file. Γöé
Γöé Γöé Γöé Γöé
Γöé Γöé Γöé Use the push buttons to add, change, or delete Γöé
Γöé Γöé Γöé NetBIOS names in your filtering criteria. Γöé
Γöé Γöé Γöé Γöé
Γöé Γöé Γöé Filtering is performed on all NetBIOS names Γöé
Γöé Γöé Γöé that match the name or portion of the NetBIOS Γöé
Γöé Γöé Γöé name that is entered. Γöé
Γöé Γöé Γöé Γöé
Γöé Γöé Γöé To use wild card filtering, place the first Γöé
Γöé Γöé Γöé characters of the NetBIOS name in the entry Γöé
Γöé Γöé Γöé field. All trailing characters are omitted. Γöé
Γöé Γöé Γöé For example, the value AUS, used as a fil- Γöé
Γöé Γöé Γöé tering criteria, selects all names starting Γöé
Γöé Γöé Γöé with AUS. Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓòÉΓòÉΓòÉ 8.9. Filtering Strategies for the LAN-to-LAN Environment ΓòÉΓòÉΓòÉ
Automatic filtering is not supported for the LAN-to-LAN environment shown in
LAN-to-LAN Environments. The filtering requirements for your LAN-to-LAN
environment depend on the number of workstations that require access to the LAN
Distance WAN connection and overall performance requirements.
Customize filtering criteria and define the LAN Distance bridge hop count to:
Limit access to the LAN Distance WAN connection to only those LAN
workstations that require access.
Improve the performance of the LAN Distance WAN connection by limiting
the volume of LAN traffic.
In the following examples, filtering strategies are provided for four
LAN-to-LAN setups. Select the example that is similar to your setup. As
defined for these examples, a small LAN has 1 - 20 workstations, a medium LAN
has 20 - 50 workstations, and a large LAN has 50+ workstations.
ΓòÉΓòÉΓòÉ 8.9.1. Example 1: Small LAN Connecting to Small LAN ΓòÉΓòÉΓòÉ
Because there are not a large number of workstations on either LAN that require
access to the LAN Distance WAN connection, filtering may not be required to
limit the volume of LAN traffic. When connecting a small number of
workstations, performance requirements--the capacity (speed) of the connection
and desired response times--are the primary consideration for defining
filtering criteria.
ΓòÉΓòÉΓòÉ 8.9.2. Example 2: Small LAN Connecting to Medium LAN ΓòÉΓòÉΓòÉ
If all of the workstations on the medium LAN have access to the resources on
the small LAN, the volume of LAN traffic could easily inundate the LAN Distance
connection. Define filtering criteria at the LAN Distance Connection Server on
the medium LAN. Limit access to the LAN Distance connection to only the
workstations on the small LAN that require access to resources on the medium
LAN.
ΓòÉΓòÉΓòÉ 8.9.3. Example 3: Small LAN Connecting to Large Enterprise LAN ΓòÉΓòÉΓòÉ
A large enterprise LAN typically has multiple LAN segments connected by
permanent bridges. To restrict the volume of LAN traffic on the LAN Distance
connection, limit the resources on the enterprise LAN that the workstations on
the small LAN can access. From the LAN Distance Connection Server on the
enterprise LAN, define filtering criteria and use the bridge hop count to limit
access only to these resources.
ΓòÉΓòÉΓòÉ 8.9.4. Example 4: Medium LAN Connecting to a Medium LAN ΓòÉΓòÉΓòÉ
Connecting LANs with a large number of workstations is only recommended if the
number of workstations that require access to the LAN Distance connection can
be limited to a small number. Identify the workstations on both LANs that
require access to the LAN Distance connection. At each of the LAN Distance
Connection Servers, use filtering criteria and the LAN Distance bridge hop
count to limit access to only those workstations that require access.
ΓòÉΓòÉΓòÉ 8.10. Using Bit-Inverted Addresses to Filter Traffic between Token-Ring and Ethernet LAN Segments ΓòÉΓòÉΓòÉ
Multisegmented LANs can contain both Token-Ring and Ethernet segments. Hardware
bridges between Token-Ring and Ethernet LANs use bit-inversion to convert
Token-Ring and Ethernet addresses. To filter traffic from a LAN type different
than the LAN type on which the LAN Distance Connection Server is installed,
specify the bit-inverted address for the LAN resource that you want to filter.
For example, if the address for the Ethernet LAN workstation shown in Filtering
Traffic from an Ethernet LAN is 123456789ABC, you would specify the
bit-inverted address (482C6A1E593D) when defining filter criteria at the LAN
Distance Connection Server. To bit-invert LAN addresses, see Using
Bit-Inverted Addresses to Filter Traffic between Token-Ring and Ethernet LAN
Segments.
Filtering Traffic from an Ethernet LAN
ΓòÉΓòÉΓòÉ 8.10.1. How to Bit-Invert LAN Addresses ΓòÉΓòÉΓòÉ
The following example lists steps for bit-inverting LAN address 123456789ABC.
1. Separate the 12-character hexadecimal address into six 2-character sets.
Example: 12 34 56 78 9A BC
2. Reverse the positions of the characters in each 2-character set.
Example: 21 43 65 87 A9 CB
3. Then convert each character using the following table.
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÉ
Γöé CHARACTER Γöé 0 Γöé 1 Γöé 2 Γöé 3 Γöé 4 Γöé 5 Γöé 6 Γöé 7 Γöé 8 Γöé 9 Γöé A Γöé B Γöé C Γöé D Γöé E Γöé F Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöñ
Γöé Conver- Γöé 0 Γöé 8 Γöé 4 Γöé C Γöé 2 Γöé A Γöé 6 Γöé E Γöé 1 Γöé 9 Γöé 5 Γöé D Γöé 3 Γöé B Γöé 7 Γöé F Γöé
Γöé sion Γöé Γöé Γöé Γöé Γöé Γöé Γöé Γöé Γöé Γöé Γöé Γöé Γöé Γöé Γöé Γöé Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÿ
Example: 482C6A1E593D
ΓòÉΓòÉΓòÉ 9. Setting Up Point-to-Point Protocol (PPP) ΓòÉΓòÉΓòÉ
There are several tasks you must do to configure the connection server to
support PPP clients. These tasks include:
Reviewing IP address considerations for PPP clients
Configuring a TCP/IP protocol router. This includes:
- Binding the IBM TCP/IP protocol to certain adapters
- Setting TCP/IP configuration information.
Updating the \WAL\WCLLOCAL.INI file and adding PPP operating parameters.
Administering IP addresses for PPP connections. You can administer IP
addresses in three ways:
- Local IP address listing
- DHCP server services
- Client IP address configuration.
Creating userids for PPP clients.
The setup tasks are described in the sections that follow. Information about
creating userids for PPP clients is described in Security for PPP Clients.
ΓòÉΓòÉΓòÉ 9.1. PPP Client IP Address Considerations ΓòÉΓòÉΓòÉ
The LAN Distance connection server supports two ways of routing frames between
the LAN and the WAN for PPP clients:
LAN and WAN are different networks
TCP/IP has two interfaces configured, each with an IP address from a
different subnet. PPP clients must be assigned an IP address from the
same subnet that is assigned to the WAN interface.
LAN and WAN are the same network
The TCP/IP proxy ARP feature allows two interfaces to be configured with
IP addresses from the same network. For example, the LAN is using a
Class B network number of 172.16.x.x, which does not understand subnets.
The IP address 172.16.1.26 is assigned to the LAN interface and
172.16.2.8 is assigned to the WAN interface. Using a router subnet mask
of 255.255.255.0 causes frames to be routed between the LAN and the WAN.
When a PPP client connects and is assigned an IP address of 172.16.2.x,
the LAN Distance connection server adds ARP and route entries, as
required, for the proxy ARP configuration. The TCP/IP router responds to
ARP requests from the LAN to a PPP client with its own hardware address.
When the connection server receives a frame that is intended for the PPP
client, the TCP/IP router forwards the frame to the correct client based
on the ARP and Route table entries.
Note: An alternative way to configure the two TCP/IP interfaces is to use
two different subnet masks. For example, assume that all workstations on the
LAN are using a subnet mask of 255.255.255.0. Use 255.255.255.0 for the LAN
interface and 255.255.255.128 for the WAN interface.
ΓòÉΓòÉΓòÉ 9.2. Configuring a TCP/IP Protocol Router ΓòÉΓòÉΓòÉ
The LAN Distance connection server bridges all data frames from LAN Distance
clients between the LAN and the WAN as described in the previous section.
However, for PPP clients, data frames are sent to the TCP/IP stack bound to the
LAN Distance logical adapter. Therefore, you must configure TCP/IP as a router
between the LAN and the WAN.
To configure TCP/IP for routing, you must first bind the IBM TCP/IP protocol to
the:
LAN adapter
LAN Distance logical adapter
After this is complete, you must set some TCP/IP configuration information for
PPP. The steps to complete these tasks are described in the next two
sections.
Note: When the LAN Distance connection server is configured for transparent
bridging and the TCP/IP router is configured, LAN Distance clients will not be
able to TCP/IP ping the LAN or WAN TCP/IP interfaces on the connection server.
ΓòÉΓòÉΓòÉ 9.2.1. Binding the IBM TCP/IP Protocol to the LAN Adapters ΓòÉΓòÉΓòÉ
The first step in configuring TCP/IP for routing is to bind the IBM TCP/IP
protocol to the:
LAN adapter
LAN Distance logical adapter
Complete the following steps:
1. To bind the IBM TCP/IP protocol to the adapters, use the Adapters and
Protocol Support application. You can start the application in one of
three ways:
If LAN Server is installed, open the LAN Services File and Print
folder. Double-click the OS/2 LAN Services
Installation/Configuration icon. Select the Tailored pushbutton on
the Easy or Tailored Installation/Configuration panel. Then select
the Install or configure this workstation radio button on the
Installation Tasks panel to continue to the Adapter and Protocol
Configuration window.
Enter mpts from an OS/2 command prompt.
Open the OS/2 System folder. Open the System Setup folder.
Double-click on the MPTS Adapters and Protocols icon.
2. If MPTS was started from an OS/2 command prompt or from the OS/2 System
Folder, then when the Configure window is displayed, select the LAN
adapters and protocols radio button. Click on the Configure push button.
3. Use the Adapter and Protocol Configuration window to bind the IBM TCP/IP
protocol to the adapters.
Note: LAN Distance assumes the LAN adapter that is used for routing is
the first adapter that is the same LAN type as the connection server
(Ethernet or Token Ring) and is configured for TCP/IP.
In the Current Configuration list box, highlight the LAN adapter you will
use for routing. Highlight the IBM TCP/IP protocol in the Protocols list
box. Click on the Add push button directly under the Protocols list box.
The window is redisplayed and shows IBM TCP/IP below the LAN adapter you
selected.
4. In the Current Configuration list box, highlight the LAN Distance logical
adapter. Highlight the IBM TCP/IP protocol in the Protocols list box.
Click on the Add push button directly under the Protocols list box.
The window is redisplayed and shows IBM TCP/IP below the LAN Distance
logical adapter you selected.
The following is a Token Ring example of how the Current Configuration
list box might look after you bind the TCP/IP protocol to the two
adapters.
IBM Compatible Token-Ring Network Adapter (IBMTOK.OS2)..........
0 - IBM IEEE 802.2
0 - IBM TCP/IP
LAN Distance Logical Adapter..........
1 - IBM OS/2 NETBIOS
1 - IBM TCP/IP
The following is an Ethernet example of how the Current Configuration
list box might look after you bind the TCP/IP protocol to the two
adapters.
LAN Distance Logical Adapter..........
1 - IBM OS/2 NETBIOS
1 - IBM TCP/IP
SMC Ethernet MCA Adapter Family (SMC8000.OS2)..........
0 - [SR_BRIDGE]
0 - IBM TCP/IP
[BRIDGEFH]..........
1 - [SR_BRIDGE]
5. Select the appropriate push buttons to close the Adapters and Protocol
Support application.
6. The application updates the CONFIG.SYS file. You are asked to select the
appropriate drives for the file and the Update CONFIG.SYS check box.
7. Select the appropriate push buttons to close the application.
8. After you close the application, you must set some TCP/IP configuration
information. See Setting TCP/IP Configuration Information for PPP.
ΓòÉΓòÉΓòÉ 9.2.2. Setting TCP/IP Configuration Information for PPP ΓòÉΓòÉΓòÉ
After you bind the IBM TCP/IP protocol to the adapters, you must set TCP/IP
configuration information for PPP. You must configure a LAN interface for the
LAN adapter and a LAN interface for the LAN Distance logical adapter.
The application you use depends on whether or not you have TCP/IP installed.
1. Follow the procedure that best describes your configuration:
If TCP/IP is not installed, use Multi-Protocol Transport Services
(MPTS). You can access MPTS by entering mpts from an OS/2 command
prompt or by double-clicking on the MPTS Adapters and Protocols icon
in the System Setup folder.
If TCP/IP is installed, use the TCP/IP Configuration application.
You can access the application by entering tcpcfg from an OS/2
command prompt or by double-clicking on the TCP/IP Configuration
icon in the TCP/IP folder.
2. With either of the above configurations, you must configure an interface
for the LAN adapter. Then, configure an interface for the LAN Distance
logical adapter.
Note: The IP addresses for the two interfaces cannot be assigned by
DHCP if the ObtainIPaddr parameter in the \WAL\WCLLOCAL.INI file is set
to DHCP.
3. Next, create a default route.
4. Some networks require dynamic routing. If your network requires dynamic
routing, then start ROUTED. TCP/IP must be installed in order to start
ROUTED.
5. After you have completed these steps, close the application.
6. You must now shut down your OS/2 system and then restart it.
ΓòÉΓòÉΓòÉ 9.3. Specifying PPP Parameters in the \WAL\WCLLOCAL.INI File ΓòÉΓòÉΓòÉ
When the LAN Distance connection server starts, it gets specific operating
information from the \WAL\WCLLOCAL.INI file. You need to include operating
parameters for point-to-point protocol (PPP) in this file.
1. Edit the \WAL\WCLLOCAL.INI file using an ASCII editor.
2. Update a PPP section to the file as follows. Additional information
about the parameters follows the example.
[PPP]
ObtainIPaddr={LIST, DHCP, USERSPEC}
pppSecurity={PAP, CHAP}
DDNS={YES, NO}
ClientsDomainNm=domain name
DHCPMaxWait=seconds
Where:
ObtainIPaddr = indicates where PPP gets the IP addresses
for a PPP session.
LIST = Get IP addresses from the
\WAL\WCLIPADR.INI file.
DHCP = Get IP addresses from a DHCP server
that is operating on the LAN.
USERSPEC = The client workstation or workstations
have configured their own IP addresses.
You can use LIST, DHCP, and USERSPEC together.
pppSecurity = indicates whether PPP uses PAP security
or CHAP security for user authentication.
PAP = Use PAP security for user authentication.
CHAP = Use CHAP security for user authentication.
You can use PAP and CHAP together.
DDNS = indicates whether PPP will enable DDNS
for PPP sessions.
YES = PPP will enable DDNS.
NO = PPP will not enable DDNS.
You cannot use YES and NO together.
ClientsDomainNm = indicates the domain name of the client.
DHCPMaxWait = indicates the interval, in seconds, that the
LAN Distance connection server waits for a
response from any DHCP server.
You can specify a value from 2-40 seconds.
The following provides more information about the configuration parameters and
options.
ObtainIPaddr
For the ObtainIPaddr parameter, you can use the LIST, DHCP, and USERSPEC
options together. PPP tries to use the first option that is specified.
If the option does not work, PPP tries to use the next specified option,
and so on. If you do not explicitly specify an option, the default
option is USERSPEC. The following are some examples showing how you can
specify the three options:
ObtainIPaddr=LIST
ObtainIPaddr=LIST,DHCP,USERSPEC
ObtainIPaddr=USERSPEC,DHCP
ObtainIPaddr=DHCP
pppSecurity
For the pppSecurity parameter, you can use the PAP and CHAP options
together, in any order. PPP tries to use the first option that is
specified. If the option does not work, PPP tries to use the next
specified option. If you do not explicitly specify an option, the
default option is CHAP. The following are some examples showing how you
can specify the two options:
pppSecurity=PAP,CHAP
pppSecurity=CHAP
pppSecurity=CHAP,PAP
For more information, see Creating Userids for PPP Clients.
DDNS
The DDNS parameter indicates whether the LAN Distance userid should be
used as the host name that is associated with the IP address. The IP
address is obtained from the DHCP server. You can specify either YES or
NO, but not both. If you specify YES, the dynamic name server (DNS) is
updated when an IP address is obtained. If you do not explicitly specify
an option, the default option is NO. The DDNS parameter is only used
when an IP address is obtained using DHCP. The following show how you
can specify the two options:
DDNS=YES
DDNS=NO
In order to specify YES, the DHCP server must support the fully qualified
domain name as an option. The DNS must let someone other than the client
update the fully qualified domain name to IP address mapping.
LAN Distance uses the following options in the DHCP messages:
Option 81 - Fully qualified domain name option
Option 12 - Host name option
Option 15 - Domain name option
ClientsDomainNm
This parameter is used only when DDNS=YES. If you do not specify a
value, the domain name is obtained from \MPTN\ETC\RESOLV2 on the Warp
server. Otherwise, the value you specify is used as the domain name.
You can specify the name as follows:
ClientsDomainNm=domain-name
DHCPMaxWait
For the DHCPMaxWait parameter, you can specify a value from 2-40 seconds.
If the LAN Distance connection server does not receive a response from
the DHCP server in the number of seconds you specify, the connection
server does not get an IP address from DHCP for that specific PPP session
request. The LAN Distance connection server retries two times. The
default timeout value is 3. You can specify the number of seconds as
follows:
DHCPMaxWait=5
DHCPMaxWait=20
If the ObtainIPaddr parameter specifies DHCP and DHCP is followed by
either LIST or USERSPEC, the PPP client connecting to the Lan Distance
Connection Server must be able to remain active during the time period
that the connection server is waiting for a response from the DHCP
server. Since the LAN Distance Connection Server will always retry two
times, the client must be able to wait for the number of seconds
specified by this parameter times two. Example: If the DHCPMaxWait
parameter is set to 3, then the client must be able to wait for a
connection response for at least 6 seconds. Some PPP clients will time
out in as little as 8 seconds.
ΓòÉΓòÉΓòÉ 9.4. Administering IP Addresses for PPP Connections ΓòÉΓòÉΓòÉ
There are three ways you can administer IP addresses for point-to-point
protocol (PPP) connections:
Local IP address listing
DHCP server services
Client IP address configuration
The administration information is described in the following sections.
ΓòÉΓòÉΓòÉ 9.4.1. Using the Local IP Address Listing ΓòÉΓòÉΓòÉ
To administer the IP addresses for point-to-point protocol (PPP) connections,
you can use the local IP address listing in the \WAL\WCLIPADR.INI file. The
\WAL\WCLIPADR.INI file contains an ASCII text listing of the IP addresses that
are reserved for the connection server to use for PPP connections. LAN
Distance processes the listing as follows. When there is a request for an IP
address, the IP address is assigned for the duration of the PPP connection.
The IP address cannot be reused until the PPP connection ends.
The \WAL\WCLIPADR.INI file is used for administering IP addresses if the
ObtainIPaddr parameter in the \WAL\WCLLOCAL.INI file specifies LIST. The
ObtainIPaddr parameter allows the LIST option to be specified with the DHCP and
USERSPEC options. PPP tries to use the first option that is specified. If the
option does not work, PPP tries to use the second option, and so on. For more
information about the ObtainIPaddr parameter, see Specifying PPP Parameters in
the \WAL\WCLLOCAL.INI File.
To use the local IP address listing, do the following:
1. Edit or create the \WAL\WCLIPADR.INI file using an ASCII editor.
2. Add the following information to the file using the specified format:
[IPADDRESSES]
x.x.x.x
y.y.y.y-z.z.z.z
Where:
x.x.x.x represents a single IP address that
can be assigned for a PPP connection.
y.y.y.y-z.z.z.z represents a range of IP addresses that
can be assigned for a PPP connection.
ΓòÉΓòÉΓòÉ 9.4.2. Using DHCP Server Services ΓòÉΓòÉΓòÉ
You can use DHCP server services to administer the IP addresses for
point-to-point protocol (PPP) connections. Using DHCP lets the LAN Distance
connection server submit requests on behalf of a PPP client to a DHCP server.
Client-generated DHCP requests over the PPP connection are not supported; only
LAN Distance connection server requests are supported. LAN Distance obtains an
IP address from a DHCP server and passes the address to the PPP client. LAN
Distance maintains the lease for the IP address on behalf of the client.
Note: If the LAN Distance connection server fails to renew the lease for an
IP address, the client can no longer use the IP address. When the lease
expires, the ARP table entries associated with the client's IP address are
deleted from the connection server. Once the ARP table entries are deleted,
the client can no longer use TCP/IP. The client does not receive notification
that the IP address can no longer be used. The client must disconnect from the
LAN Distance connection server and then reconnect in order to obtain a new IP
address. A message is written to the LAN Distance connection server message
log when this scenario occurs.
Setting up DHCP services requires a good working knowledge of network
management. If you do not feel comfortable using this option, see Using the
Local IP Address Listing for an easier way to administer IP addresses.
DHCP server services are used for administering IP addresses if the
ObtainIPaddr parameter in the \WAL\WCLLOCAL.INI file specifies DHCP. The
ObtainIPaddr parameter allows the DHCP option to be specified with the LIST and
USERSPEC options. PPP tries to use the first option that is specified. If the
option does not work, PPP tries to use the second option, and so on. For more
information about the ObtainIPaddr parameter, see Specifying PPP Parameters in
the \WAL\WCLLOCAL.INI File.
ΓòÉΓòÉΓòÉ 9.4.3. Using the Client IP Address Configuration ΓòÉΓòÉΓòÉ
A third method of administering IP addresses is to assign a unique IP address
to each PPP client. This address is used with a PPP client dialer application.
To use this method, each user must configure a unique IP address at the PPP
client workstation.
The client IP address configuration is used for administering IP addresses if
the ObtainIPaddr parameter in the \WAL\WCLLOCAL.INI file specifies USERSPEC.
The ObtainIPaddr parameter allows the USERSPEC option to be specified with the
LIST and DHCP options. PPP tries to use the first option that is specified.
If the option does not work, PPP tries to use the second option, and so on.
For more information about the ObtainIPaddr parameter, see Specifying PPP
Parameters in the \WAL\WCLLOCAL.INI File.
Note: This method of administering IP addresses can be a difficult method to
control. You could have problems whenever changes to the network are required
or if users use duplicate IP addresses.
ΓòÉΓòÉΓòÉ 10. Setting Up LAN Distance Security ΓòÉΓòÉΓòÉ
Adding remote access capabilities to your LAN can make your LAN and its
resources vulnerable to unauthorized remote access. The security features
provided by the LAN Distance product control access to the LAN Distance
Connection Server and help prevent LAN access by unauthorized users.
This chapter describes LAN Distance security features, covers planning
considerations, and provides steps for enabling security, logging on to a
secure LAN Distance Connection Server, setting up user accounts, defining a
security policy, and changing your passphrase.
All of the security features described in this chapter are optional and
are supported for the LAN Distance Connection Server and the OS/2 LAN
Distance Remote product. Because controlling access to LAN resources is
so important, this chapter focuses on setting up security at a LAN
Distance Connection Server.
The security features for PPP clients are described in Security for PPP
Clients.
The security features supported for the MS Windows LAN Distance Remote
are described in Security for MS Windows LAN Distance Remote
Workstations.
See Security Database Tools for additional tools that can be used for security
administration on a LAN Distance Connection Server.
ΓòÉΓòÉΓòÉ 10.1. Understanding Required and Optional Security Features ΓòÉΓòÉΓòÉ
LAN Distance security supports a range of security features that allows you to
set up as much, or as little, security as your environment requires. This
section focuses on the LAN Distance security features required for each user
account that you set up. Optional security features are not required for user
accounts. See Setting Up Optional Features for a User Account for more
information.
ΓòÉΓòÉΓòÉ 10.1.1. User IDs and Passphrases ΓòÉΓòÉΓòÉ
When a LAN Distance remote workstation dials a secure LAN Distance Connection
Server, they are prompted for a user ID and passphrase. When a PPP client
dials a secure LAN Distance connection server, the client must provide a user
ID and passphrase as part of their dialer configuration. As the security
administrator, you define a user ID for each authorized user; passphrases are
optional. The user ID and passphrase the user specifies when logging on must
match the user ID and passphrase you defined for that user account at your
secure LAN Distance Connection Server.
LAN Distance Remote Logon Window
Note: A PPP client user cannot change the passphrase remotely. For more
information about security features that you cannot use for PPP clients, see
Security for PPP Clients.
You can also require users to logon with a passphrase. Either the user or the
security administrator can change the passphrase. If the user changes the
passphrase and then forgets it, you cannot look up the passphrase. A user with
security administrator privilege must specify a new passphrase for the
forgetful user before they can log on.
Warning: If you forget the passphrase for your personal security administrator
account, you cannot log on to your secure LAN Distance Connection Server and
access the user account database. If only one security administrator account
is defined at this LAN Distance Connection Server, access to the user account
database cannot be recovered.
ΓòÉΓòÉΓòÉ 10.1.2. User Privilege Types ΓòÉΓòÉΓòÉ
As the security administrator, you assign a user type for each user authorized
to access your secure LAN Distance Connection Server. The tasks each user is
allowed to perform will vary based on:
The user type you assign: user, system administrator, or security
administrator.
The type of secure LAN Distance workstation the user logs on to.
Whether the user is logging on to a local or nonlocal workstation.
Whether the user is logged on from a PPP client.
The following topics show the menu items different user types can access from
the Open as pull-down menu when logging on to a secure LAN Distance Connection
Server. In the following examples, the user and system administrator are
logging on from a nonlocal workstation, and the security administrator is
logging on at a local workstation.
Note: In the following sections, the workstations in the examples are LAN
Distance workstations, not PPP clients.
ΓòÉΓòÉΓòÉ 10.1.2.1. User ΓòÉΓòÉΓòÉ
When a user logs on to a nonlocal LAN Distance Connection Server, the menu
items shown in User Logged on to a Secure LAN Distance Connection Server are
displayed in the Open as pull-down menu. Users can:
View call activity for ports and view the modems currently in use at the
LAN Distance Connection Server through call and port management.
View users logged on to the LAN Distance Connection Server.
Access their personal account information at the LAN Distance Connection
Server and change their passphrases.
User Logged on to a Secure LAN Distance Connection Server
ΓòÉΓòÉΓòÉ 10.1.2.2. System Administrator ΓòÉΓòÉΓòÉ
When a system administrator logs on to a nonlocal LAN Distance Connection
Server, the menu items shown in System Administrator Logged on to a Secure LAN
Distance Connection Server are displayed in the Open as pull-down menu. In
addition to the user tasks listed above, a system administrator can:
Start and stop active calls for ports and modem types at the LAN Distance
Connection Server through call and port management.
View and change configuration settings for the LAN Distance Connection
Server through the Settings notebook.
Access the Tracking notebook tools to view statistics for system
management and view error information for problem determination.
Note: The system administrator cannot enable or disable security through the
Settings notebook, and cannot access user accounts in the User Account
Management notebook.
System Administrator Logged on to a Secure LAN Distance Connection Server
ΓòÉΓòÉΓòÉ 10.1.2.3. Security Administrator ΓòÉΓòÉΓòÉ
When a security administrator logs on locally to a secure LAN Distance
Connection Server, the menu items shown in Security Administrator Logged on to
a Secure LAN Distance Connection Server are displayed in the Open as pull-down
menu. In addition to the tasks that users and system administrators can
perform, a security administrator can:
Select a phone book entry in the phone book to dial out and establish a
connection.
If the security administrator logs on to the LAN Distance Connection
Server from a nonlocal workstation, the LAN Distance Connection Server
phone book cannot be accessed.
Add and change user account information through the User Account
Management notebook.
Enable and disable security for the LAN Distance Connection Server from
the Security tab in the Settings notebook.
View any errors or messages logged for the LAN Distance Connection
Server.
If the security administrator logs on to the LAN Distance Connection
Server from a nonlocal workstation, the security administrator does not
have access to error and message logs at the LAN Distance Connection
Server.
Security Administrator Logged on to a Secure LAN Distance Connection Server
ΓòÉΓòÉΓòÉ 10.2. Planning Considerations for LAN Distance Security ΓòÉΓòÉΓòÉ
Review the planning considerations covered in this section before setting up
security on a LAN Distance Connection Server or LAN Distance Remote.
ΓòÉΓòÉΓòÉ 10.2.1. Implementing Local Security on a LAN Distance Remote ΓòÉΓòÉΓòÉ
The primary purpose of LAN Distance security is to prevent unauthorized access
to resources on your LAN. If a LAN Distance Remote in your environment is used
as a stand-alone application or database server, you can set up local security
to control access to resources at the LAN Distance Remote.
The security features for the LAN Distance Remote are the same as those
available on the LAN Distance Connection Server, and the steps for setting up
security on the LAN Distance Remote are identical to those for the LAN Distance
Connection Server. See Steps for Setting Up Security on a LAN Distance
Workstation.
ΓòÉΓòÉΓòÉ 10.2.2. Security for MS Windows LAN Distance Remote Workstations ΓòÉΓòÉΓòÉ
Local security for a LAN Distance Remote is supported only for OS/2 LAN
Distance Remotes. Security administrators can set up user IDs and passphrases
at the LAN Distance Connection Server to validate access from a MS Windows LAN
Distance Remote. MS Windows LAN Distance Remotes, like OS/2 LAN Distance
Remotes, can dial into a secure LAN Distance Connection Server, access their
personal account information and change their passphrases.
ΓòÉΓòÉΓòÉ 10.2.3. Creating User Accounts ΓòÉΓòÉΓòÉ
As the security administrator, you create user accounts for every user
authorized to remotely access a secure LAN Distance Connection Server. User
accounts contain required security features (user IDs and user types), plus any
optional security features. The security administrator creates user accounts
through the User Account Management notebook:
User accounts are stored in the user account database file (WCBUSRF.ISF)
in the WAL directory.
Only users with a security administrator account can access the User
Account Management notebook.
To control access to the User Account Management notebook a limited
number of trusted security administrators should have a user account at a
secure LAN Distance Connection Server.
After you create user accounts at the LAN Distance Connection Server, you
can set up identical user accounts on another secure LAN Distance
workstation simply by copying the WCBUSRF.ISF file to the WAL directory
on that workstation.
Users logged on to a secure LAN Distance Connection Server can view
general information about their user account and change their passphrase
through the Personal Account Information notebook.
For information about security features that are not available for PPP
clients, see Security for PPP Clients.
ΓòÉΓòÉΓòÉ 10.2.4. Protecting LAN Distance Passphrases ΓòÉΓòÉΓòÉ
In the LAN Distance user account database, passwords are saved in two forms:
One-way encrypted form, which is only used for LAN Distance clients
Data encryption standard (DES) form, which is only used for PPP clients.
LAN Distance passphrases are one-way encrypted to form a password key. The
password key is stored in its encrypted form in the user account database at
the secure LAN Distance Connection Server. As added protection, the password
key is encrypted with a secret session key before it is transmitted.
To support PPP clients, the LAN Distance user account database also saves the
passphrase using DES encryption.
LAN Distance security adds another layer of security that supplements security
provided by other systems on the LAN. Anyone monitoring your LAN Distance WAN
connection cannot see the encrypted LAN Distance passphrase, but they can see
passwords you use to log on to other systems that do not encrypt passwords.
Passphrases should be unique across all of the secure systems that you log on
to.
For example, if you need to log on to other systems, such as a LAN Server or a
3270 host, make certain that the passphrase used to log on to the LAN Distance
Connection Server and the passwords used for the LAN Server and the 3270 host
sessions are different. You can set a minimum passphrase length to help make
the LAN Distance passphrase unique. (See Description of Policy Options.)
ΓòÉΓòÉΓòÉ 10.2.5. Avoiding Multiple LAN Distance Logons ΓòÉΓòÉΓòÉ
When security is enabled at a LAN Distance Remote and at the LAN Distance
Connection Server, the user at the LAN Distance Remote can avoid multiple
logons if the same LAN Distance user ID and passphrase are defined at the
secure LAN Distance workstations.
For example, after the user logs on to their secure LAN Distance Remote and
establishes a connection to the secure LAN Distance Connection Server, the user
ID and passphrase used to log on to the LAN Distance Remote is used to
automatically log on the user at the LAN Distance Connection Server.
Note: Any additional logons required by secure systems on the LAN occur after
the user establishes a connection to the LAN Distance Connection Server.
ΓòÉΓòÉΓòÉ 10.2.6. Physical Security for LAN Distance Workstations ΓòÉΓòÉΓòÉ
LAN Distance security can be effective only if your LAN Distance workstation is
physically secure. When you enable security at a LAN Distance Connection Server
or LAN Distance Remote user account information, such as user IDs and password
keys (encrypted passphrase), is stored in the WCBUSRF.ISF file. To ensure that
unauthorized users cannot access this file, physically secure your secure LAN
Distance Connection Server and restrict access to a limited number trusted
security administrators.
ΓòÉΓòÉΓòÉ 10.2.7. Encrypting LAN Data Sent over the LAN Distance Connection ΓòÉΓòÉΓòÉ
LAN Distance does not encrypt LAN data sent over the LAN Distance WAN
connection. To encrypt LAN data sent over the LAN Distance connection, purchase
special data encryption devices and employ them at both ends of the LAN
Distance connection.
ΓòÉΓòÉΓòÉ 10.2.8. Using the LAN Distance Bridge Filtering Criteria to Restrict Access ΓòÉΓòÉΓòÉ
In addition to LAN Distance security, you can use custom filtering criteria to
help prevent unauthorized access to LAN resources. For example, to restrict
LAN access to a limited set of LAN Distance logical adapter network addresses,
define these addresses through the Bridge tab in the Settings notebook. For
steps, see Customizing Filtering Criteria. You can also use other custom
filtering criteria--SAPs and NetBIOS names--to restrict access to LAN
resources.
ΓòÉΓòÉΓòÉ 10.3. Security for PPP Clients ΓòÉΓòÉΓòÉ
The LAN Distance connection server supports password authentication protocol
(PAP) and challenge-handshake authentication protocol (CHAP) that PPP clients
can use. For information about specifying the PAP and CHAP options, see
Specifying PPP Parameters in the \WAL\WCLLOCAL.INI File.
For PPP clients, you must create userids using this version of LAN Distance.
For information about creating userids, see Creating Userids for PPP Clients.
The following features are not supported for PPP clients:
PPP clients cannot perform security administration functions
PPP clients cannot change their own passphrases
The logical adapter network address and callback security features for
user accounts are not supported for PPP clients
The maximum age and maximum logon attempts policy options are not
enforced for PPP clients.
ΓòÉΓòÉΓòÉ 10.3.1. Creating Userids for PPP Clients ΓòÉΓòÉΓòÉ
If security is enabled on the connection server, you must create userids for
any PPP clients. For previous versions of LAN Distance, the security database
saves passwords in a one-way encrypted form. Because of this, the passwords for
existing userids cannot be used to support password authentication protocol
(PAP) or challenge-handshake authentication protocol (CHAP), which the
connection server uses for passphrase authentication. For all current userids,
you must either change the passphrase or create a new user account and
passphrase. You can do this using the LAN Distance User Account Manager
notebook or offline using the CMPRINT and CMMERGE tools.
The database that this version of LAN Distance updates is compatible with the
old servers.
The passphrase considerations are:
The LAN Distance passphrases are case sensitive. If the PPP client does
not support case sensitivity, define the initial passphrase in all
uppercase.
The LAN Distance passphrase can be up to 32 characters. If the PPP
client does not support long passphrases, create the initial passphrase
using the limitations of the client.
ΓòÉΓòÉΓòÉ 10.4. Steps for Setting Up Security on a LAN Distance Workstation ΓòÉΓòÉΓòÉ
Follow these general steps to set up LAN Distance security at a LAN Distance
Connection Server or OS/2 LAN Distance Remote. Each step is described in
detail in sections that follow.
1. Enable security at the LAN Distance workstation.
2. Log on to your LAN Distance workstation using the default user account
for the security administrator.
3. Set up a user account that contains required information (user ID and
user type) for each user that needs to log on to your secure LAN Distance
workstation.
4. Define any optional security features for user accounts.
5. Define security policy options for passphrases and user IDs that apply to
all user accounts.
ΓòÉΓòÉΓòÉ 10.5. Enabling LAN Distance Security ΓòÉΓòÉΓòÉ
LAN Distance security must be enabled on a LAN Distance Connection Server or
LAN Distance Remote before you can set up user accounts.
Settings Notebook, Security Tab
To enable Lan Distance security,
1. Select Settings from the Open as pull down menu.
2. From the Settings notebook select the Security tab.
3. From the Security tab page, (see Settings Notebook, Security Tab) select
the Enable LAN Distance security checkbox. If the Enable LAN Distance
security checkbox is not checked, LAN Distance security is disabled.
4. To activate security on your LAN Distance workstation, close the Settings
notebook. Then stop and restart the LAN Distance product.
ΓòÉΓòÉΓòÉ 10.6. Enabling Third Party Authentication Protocol ΓòÉΓòÉΓòÉ
Third party authentication is used for remote dial-in only.
The fields related to this checkbox are grayed out if LAN Distance security is
disabled.
To enable third party authentication, you must first enable LAN Distance
security.
1. Select the Enable Third party authentication protocol checkbox to turn on
third party authentication for the LAN Distance connection server only.
2. In the User exit name field, type the user exit DLL name. The maximum
length for this field is 8 characters. Do not enter the DLL extension.
3. Select Disable remote LAN Distance authentication if you want to use only
the third party authentication. Not selecting this checkbox allows you
to use both the LAN Distance and the third party authentication.
ΓòÉΓòÉΓòÉ 10.7. Enabling Share Security Database ΓòÉΓòÉΓòÉ
To use a security database on a redirected LNA drive:
1. Select the Enable share security database checkbox.
2. Type the drive and path of the database in Location.
The shared security database information, the user exit name, and remote
authentication options are added automatically to the WCLLOCAL.INI file.
Note: After security is enabled on your workstation, security at the local
workstation must be disabled by a security administrator.
ΓòÉΓòÉΓòÉ 10.8. Logging On Initially to Your Secure LAN Distance Workstation ΓòÉΓòÉΓòÉ
After restarting the LAN Distance product, log on to your secure LAN Distance
workstation using the default user account for the security administrator.
1. Select the icon for your secure LAN Distance workstation. From the Open
as pull-down menu, select Logon.
2. From the LAN Distance Logon window (LAN Distance Logon Window), type the
default userid (in upper- or lowercase) and the default password. Then
select the OK button.
If you installed Remote Access Services (PPP Server) while installing
OS/2 Warp Server for e-business or if you installed Remote Access
Services (PPP Server) from 'Selective Install for Networking' on the OS/2
Warp Server for e-business, the default security administrator userid and
passphrase is the same as the userid and passphrase that you entered
during installation.
If you installed Remote Access Services (PPP Server) directly from the
CID\SERVER\PPPSRV directory on the OS/2 Warp Server for e-business CD,
the default security administrator userid is SECADMIN and its passphrase
is SECADMIN (all in uppercase).
PPP Server passphrases are case sensitive. The passphrase entered during
installation will be in uppercase. Be sure to type the passphrase in
uppercase the first time you logon to the PPP Server.
LAN Distance Logon Window
3. From the pop-up message window, select the OK push button.
4. From the Change Passphrase window (Change Passphrase Window), type a new
passphrase in the New Passphrase field.
Note: Passphrases are case-sensitive. The default minimum length for
passphrases is 8 characters.
Type your new passphrase again in the Verify Passphrase field.
Change Passphrase Window
If you specify a valid passphrase, you are logged on as a security
administrator. If you specify an invalid passphrase, the log on attempt
will fail and you will be prompted to log on again.
Warning: If you exceed the default maximum number of four unsuccessful
logon attempts, you must refresh your security database file. You can
use one of the following methods:
Remove LAN Distance from your system and then reinstall it. Enable
security before you log on again.
Get the default security database file from the first Remote Access
Services (PPP Server) diskette or diskette directory.
Note: On the OS/2 Warp Server for e-business CD, the contents of
the first diskette are located in \CID\SERVER\PPPSRV\LO510A1.
Use PKUNZIP2.EXE to unzip the INITRS.ZIP file into a temporary
directory.
Copy the WCBUSRF.ISF into the WAL directory on your server.
The default security ID is now SECADMIN and the passphrase is
SECADMIN (all in uppercase).
ΓòÉΓòÉΓòÉ 10.9. Setting Up Required Features for a User Account ΓòÉΓòÉΓòÉ
As the security administrator for your secure LAN Distance workstation, you
must add a user account for every user authorized to access your workstation
remotely. Use the User Account Management notebook to set up these required
security features for user accounts:
User ID
User Type
ΓòÉΓòÉΓòÉ 10.9.1. Adding a User ID and User Type ΓòÉΓòÉΓòÉ
1. After you log on to the secure LAN Distance workstation as a security
administrator, select User Account Management from the Open as pull-down
menu.
2. From the User Account Management notebook (User Account Management
Notebook), select the Add push button.
User Account Management Notebook
3. From the Type tab (Type Tab, User Account Management Notebook), specify
required information for the new user.
Type Tab, User Account Management Notebook
In the User ID field, specify a user ID.
In the User type field, select a user type. For information about
user types, see User Privilege Types.
In the Account status field, select the Active push button.
Activating the user account allows the user to log on to your secure
LAN Distance workstation.
Deactivating a user account prevents the user from logging to the
secure LAN Distance workstation and saves the information in the
user's account. A user account is deactivated if the user exceeds
the maximum number of unsuccessful logon attempts.
ΓòÉΓòÉΓòÉ 10.10. Setting Up Optional Features for a User Account ΓòÉΓòÉΓòÉ
Use the User Account Management notebook to set up these optional security
features for user accounts:
Passphrases
Logon Time Intervals
Logical Adapter Network Addresses
Callback
ΓòÉΓòÉΓòÉ 10.10.1. Defining a Passphrase for a User Account ΓòÉΓòÉΓòÉ
As the security administrator, you can require a user to supply a passphrase
when logging on to a secure LAN Distance workstation. Passphrases are
described in User IDs and Passphrases, and considerations for using passphrases
are described in Protecting LAN Distance Passphrases.
From the Passphrase tab, the security administrator can:
Specify whether a passphrase is required to log on to a secure LAN
Distance workstation
Define a passphrase for a user account.
Change a passphrase for a user account.
To specify a passphrase for a user account:
1. From the User Account Management notebook, select the Passphrase tab
(Passphrase Tab, User Account Management Notebook).
2. Select the Passphrase required check box.
Passphrase Tab, User Account Management Notebook
3. Type the passphrase in the Passphrase field and the Passphrase for
verification field.
Note: Passphrases are case-sensitive.
4. To verify that the passphrase you specified is valid, select the Verify
passphrase push button.
ΓòÉΓòÉΓòÉ 10.10.2. Defining Logon Time Intervals for a User Account ΓòÉΓòÉΓòÉ
A LAN Distance security administrator can specify the days of the week and the
time of day that a user can log on to the LAN Distance Connection Server. If a
user attempts to log on at a time that is not within the defined interval, the
log on will fail.
From the Interval tab, the security administrator can add, change, or delete a
log on time interval for a user account:
1. From the User Account Management notebook, select the Interval tab
(Interval Tab, User Account Management Notebook).
The default logon time interval is from Sunday to Saturday and from 00:00
to 24:00, allowing the user to log on at any time.
2. To restrict the days or hours that a user is allowed to log on to the
secure LAN Distance workstation, select the Change push button.
Interval Tab, User Account Management Notebook
3. From the Change Logon Time Interval window (Change Logon Time Interval
Window), select the days and the times when the user is allowed to log
on. Select the OK push button.
Change Logon Time Interval Window
You can specify multiple log on intervals. If log on intervals overlap,
the earliest time is used as the starting point and the latest time is
used as the stopping point.
Note: Changes made to the log on time interval are saved when you close
the User Account Management notebook.
ΓòÉΓòÉΓòÉ 10.10.3. Defining Valid Logon Addresses for a User ΓòÉΓòÉΓòÉ
A security administrator can specify up to 8 LAN Distance logical adapter
network addresses for a user account. Logon will fail if the user logs on from
a LAN Distance workstation with a LAN Distance logical adapter network address
not in the list.
This feature allows the user to log on to the LAN Distance Connection Server
from more than one workstation. For example, a user might log on from a
portable workstation when traveling and from a home terminal when working at
home.
Note: This feature is not available for use with PPP clients.
1. From the User Account Management notebook, select the Addresses tab
(Addresses Tab, User Account Management Notebook).
Addresses Tab, User Account Management Notebook
2. Specify the LAN Distance logical adapter network addresses for the LAN
Distance workstations the user can log on from.
If no LAN Distance logical adapter network addresses are listed, the user
can log on to the secure LAN Distance workstation from any LAN Distance
workstation.
ΓòÉΓòÉΓòÉ 10.10.4. Setting Up Callback for a LAN Distance Remote ΓòÉΓòÉΓòÉ
For LAN Distance Remotes, the security administrator can set up the callback
feature. Callback provides additional security and allows long distance costs
to be charged to the LAN Distance Connection Server.
Note: Callback is not available for use with PPP clients.
If callback is enabled for a user account, the user is prompted to log on after
dialing the LAN Distance Connection Server. The LAN Distance Connection Server
then disconnects the call and calls the user back using a fixed or variable
phone book entry. After a connection is established, the user is authenticated
and automatically logged on to the LAN Distance Connection Server.
To enable callback for a user account:
1. From the User Account Management notebook, select the Callback tab
(Callback Tab, User Account Management Notebook).
Callback Tab, User Account Management Notebook
2. Select the Callback check box.
3. Select the Fixed or Variable radio button to specify whether the callback
telephone number for this user does not change (fixed) or does change
(variable).
4. Type the name of the phone book entry that the secure LAN Distance
workstation will use to call this user back.
ΓòÉΓòÉΓòÉ 10.11. Defining Policy Options for Your User Accounts ΓòÉΓòÉΓòÉ
The security administrator can define a security policy that applies to all
user accounts. For example, the security administrator may want to define a
policy for LAN Distance passphrases that is similar to other security systems
on the LAN.
ΓòÉΓòÉΓòÉ 10.11.1. Description of Policy Options ΓòÉΓòÉΓòÉ
The security administrator can define a security policy using any of the
following options.
Minimum Passphrase Length
A passphrase can contain 4 to 32 mixed-case characters (including
blanks). This flexible format makes passphrases easier to define and
offers improved security. The default is 8 characters.
To ensure the LAN Distance passphrase is unique, the security
administrator can set the minimum length greater than the maximum length
defined for other systems on the LAN.
Duplicate Passphrases Checked
The security administrator can define the number of unique passphrase (0
to 8) that must be used before a passphrase can be reused. The default
is 8 passphrases. If 0 is selected, no duplicate check is performed.
Maximum Passphrase Age
The security administrator can define the age limit (1 to 999 days) for a
passphrase. Users must change their passphrases on or before the day
this age limit is reached. The default is 30 days.
Minimum Passphrase Age
The security administrator can define the minimum number of days (0 to
999) that can pass before users can change their passphrases. The
default is 0. If 0 is selected, users can change their passphrase at any
time.
Maximum Number of Logon Attempts for a User ID
The security administrator can define the number of unsuccessful logon
attempts (1 to 9) allowed. The default is 4, which means if a user fails
to log on after 4 tries, their user account is deactivated. Only a
security administrator can reactivate a deactive account.
Note: Automatic logons are counted as a log on attempt. Set this value
to a minimum value of 2 so an unsuccessful automatic logon does not
prevent a user from accessing a secure LAN Distance workstation.
For information about the policy options as they apply to PPP clients, see
Security for PPP Clients.
ΓòÉΓòÉΓòÉ 10.11.2. Steps for Defining Policy Options ΓòÉΓòÉΓòÉ
Follow these steps to define a policy option for all user accounts in the User
Account Management notebook for your secure LAN Distance workstation:
1. From the User Account Management notebook, select the Policy tab.
The options you can define and their default values are described in
Defining Policy Options for Your User Accounts.
Policy Tab, User Account Management Notebook
2. Specify the values for the options you want to define.
3. Policy option changes effective when you close the User Account
Management notebook, stop and restart the LAN Distance product.
ΓòÉΓòÉΓòÉ 10.12. Changing Your Passphrase ΓòÉΓòÉΓòÉ
Users logged on to a secure LAN Distance Connection Server can view general
information about their user accounts, and change their passphrases through the
Personal Account Information notebook.
To change the passphrase for your user account:
1. Select the icon for the secure LAN Distance workstation from the LAN
Distance Workstations window.
2. From the Open as pull-down menu, select the Personal Account Information
menu item.
From the General tab, you can view information about your user account
and change the description for your user account in the User comment
field.
3. Select the Passphrase tab (Passphrase Tab, Personal Account Information
Notebook). Type your current passphrase in the Current passphrase field.
Passphrase Tab, Personal Account Information Notebook
4. Type your new passphrase in the New passphrase field and the New
passphrase for verification field.
Note: Passphrases are case-sensitive.
5. To verify that the passphrase you specified is valid, select the Verify
passphrase push button.
ΓòÉΓòÉΓòÉ 11. Setting Up to Run LAN Applications Remotely ΓòÉΓòÉΓòÉ
This chapter explains the protocol support provided by the LAN Distance
product, describes how to set up LAN protocols in addition to NetBIOS, tells
you how to verify or change a LAN Distance logical adapter network address, and
provides guidelines for adjusting NetBIOS timers on LAN Distance workstations
and LAN workstations.
ΓòÉΓòÉΓòÉ 11.1. Tips for Setting Up LAN Applications ΓòÉΓòÉΓòÉ
Before setting up your LAN applications to run over a LAN Distance
connection, make sure that your LAN applications are functioning
correctly in the LAN environment.
Install the LAN Distance Remote product after you install the LAN
applications that you want to run over the LAN Distance connection.
You may need to modify the configuration for your LAN applications to run
these applications over the slower LAN Distance WAN connection. Before
installing your LAN applications on the LAN Distance Remotes, see Setting
Up Some Popular LAN Applications.
ΓòÉΓòÉΓòÉ 11.2. Understanding the Protocol Support Provided by the LAN Distance Product ΓòÉΓòÉΓòÉ
LAN applications use many different protocols including NetBIOS in the OS/2 LAN
Server environment, IPX/SPX in the NetWare environment, and NetBIOS for
Microsoft LAN Manager. The LAN Distance product supports multiple protocols
through the industry-standard Network Driver Interface Specification (NDIS).
product utilizes the network driver architecture provided by NDIS to allow you
to set up NDIS-compliant protocols to run over the LAN Distance Logical
Adapter.
LAN Distance Product Components
ΓòÉΓòÉΓòÉ 11.2.1. Examples of Supported LAN Protocols and Applications ΓòÉΓòÉΓòÉ
Over a LAN Distance connection, LAN Distance Remotes can run LAN applications
and networking software that use NDIS-compliant protocols. protocols supported
by the LAN Distance product and lists some popular LAN applications,
communications software, and network operating systems that use these
protocols.
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Table 17. Supported LAN Protocols and Examples of LAN Applications Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé SUPPORTED Γöé LAN APPLICATIONS Γöé
Γöé PROTOCOLS Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé NETBIOS Γöé OS/2 LAN Server Γöé Microsoft LAN Manager Γöé
Γöé Γöé OS/2 LAN Requester Γöé (NetBEUI) Γöé
Γöé Γöé Person to Person/2 Γöé DOS LAN Requester Γöé
Γöé Γöé LAN Peer Services Γöé Lotus Notes Γöé
Γöé Γöé LANtastic Γöé cc:Mail** Γöé
Γöé Γöé OS/2 Extended Services* Γöé Time and Place/2 Γöé
Γöé Γöé (Database Manager) Γöé System Performance Monitor/2 Γöé
Γöé Γöé DATABASE 2 for OS/2* Γöé Γöé
Γöé Γöé Γöé Γöé
Γöé Γöé Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé IEEE 802.2 Γöé OS/2 Extended Services* Γöé DATABASE 2 for OS/2 Γöé
Γöé SNA(1) Γöé (Communication Manager) Γöé Personal Communications/3270 Γöé
Γöé Γöé Communications Manager/2 Γöé Personal Communications/5250 Γöé
Γöé Γöé AS/400* PC Support Γöé IBM System Network ArchitectureΓöé
Γöé Γöé Γöé (SNA) for OS/2 Γöé
Γöé Γöé Γöé Γöé
Γöé Γöé Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé TCP/IP Γöé TCP/IP for OS/2 Γöé LAN NetView* for OS/2 Γöé
Γöé Γöé TCP/IP for MS Windows Γöé Γöé
Γöé Γöé Γöé Γöé
Γöé Γöé Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé IPX Γöé Novell NetWare Server Γöé Novell NetWare Requester Γöé
Γöé Γöé Γöé Γöé
Γöé Γöé Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé NOTE: (1)The LAN Distance product supports remote access for SNA applica- Γöé
Γöé tions, such as IBM Communications Manager/2 3270 Emulation and Personal Γöé
Γöé Communications/3270, which run over 802.2. See set up steps for 802.2 Γöé
Γöé applications in Setting Up Some Popular LAN Applications. Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓòÉΓòÉΓòÉ 11.2.2. Protocol Support Provided for OS/2 and MS Windows LAN Distance Remotes ΓòÉΓòÉΓòÉ
NetBIOS is installed and configured for OS/2 and MS Windows LAN Distance
Remotes. If the LAN applications that you want to run over the LAN Distance
connection use the NetBIOS protocol, no additional protocol set up is required
to run these applications remotely.
ΓòÉΓòÉΓòÉ 11.2.2.1. OS/2 LAN Distance Remotes ΓòÉΓòÉΓòÉ
For OS/2 LAN Distance Remotes, in addition to NetBIOS, the IEEE 802.2 protocol
is installed when the LAN Distance Remote product is installed, but it is not
configured. If you need the 802.2 protocol to run your LAN applications,
configure the 802.2 protocol through the LAPS tab in the Settings notebook.
See Configuring Additional LAN Protocols Required for Your OS/2 LAN
Applications.
If you need protocols in addition to NetBIOS and IEEE 802.2, after you
separately install these protocols, you can configure these protocols to run
over the LAN Distance Logical Adapter through the LAPS tab in the Settings
notebook.
ΓòÉΓòÉΓòÉ 11.2.2.2. MS Windows LAN Distance Remotes ΓòÉΓòÉΓòÉ
The LAN Distance Remote for MS Windows installs NetBIOS and NetWare Requester
support (ODI2NDI), but does not install the IEEE 802.2 LAN protocol. If you
need 802.2 to run your MS Windows applications, install the LAN Support Program
(LSP) before you install the LAN Distance product. See Setting Up a MS Windows
Remote to Run 802.2 Applications.
If you need to run MS Windows applications that require other protocols, these
protocols are typically installed with the application, and require special
configuration to work with the LAN Distance product. See Setting Up Some
Popular LAN Applications.
ΓòÉΓòÉΓòÉ 11.3. Configuring Additional LAN Protocols Required for Your OS/2 LAN Applications ΓòÉΓòÉΓòÉ
If your OS/2 applications require NDIS-compliant protocols other than NetBIOS,
first install the required protocols, then follow these steps in this section
to configure the protocols through the LAPS tab in the Settings notebook.
Note: Set up your LAN protocols at the workstation on which you run your LAN
applications. For example, if your LAN Distance Remote runs the 3270 emulation
feature of IBM Communications Manager/2 to access a host on a LAN, configure
the IEEE 802.2 LAN protocol at your LAN Distance Remote. IEEE 802.2 does not
need to be configured on the LAN Distance Connection Server that you dial for
access to the LAN.
1. Open the Settings notebook and select the LAPS tab, then select the LAPS
push button to open the LAPS Configure Workstation window.
LAPS Configure Workstation Window
2. From the Current Configuration list box, select the LAN Distance Logical
Adapter.
3. From the Protocols list box, select the LAN protocol used by your LAN
application(s).
4. Select Add from the Protocols list box to add the protocol you selected
to the protocols currently configured for the LAN Distance Logical
Adapter.
5. Repeat steps 3 and 4 for each additional protocol you need to configure
for the LAN Distance Logical Adapter.
6. Select OK to exit the Configure Workstation window and return to the LAPS
tab in the Settings notebook.
7. From the LAPS tab, double-click on the system menu symbol in the upper
left corner to close the Settings notebook and save protocol changes.
8. Shut down and restart your OS/2 workstation.
ΓòÉΓòÉΓòÉ 11.4. Setting Up a MS Windows Remote to Run 802.2 Applications ΓòÉΓòÉΓòÉ
If you plan to run MS Windows applications that require the 802.2 protocol, you
can use the LAN Support Program (LSP) version 1.35 and later to install and
configure the NDIS-compliant version of 802.2.
ΓòÉΓòÉΓòÉ 11.4.1. Determine the Appropriate Method for Installing LSP ΓòÉΓòÉΓòÉ
The easiest method is to install LSP before you install the LAN Distance Remote
product. See Installing LSP Before You Install the LAN Distance Product.
You can also install LSP after you install the LAN Distance product. Use this
method (described in Installing LSP After the LAN Distance Remote Is Installed)
only if the LAN Distance product is already installed and at least one of the
following statements apply:
Your workstation does not have a LAN adapter and you have no adapter
option diskette available.
Note: Some versions of LSP may include an adapter option on the LSP
diskette in the A:\DOS directory.
You cannot remove the LAN Distance Remote product before installing LSP.
You installed LSP without NDIS 802.2 support.
ΓòÉΓòÉΓòÉ 11.5. Installing LSP Before You Install the LAN Distance Product ΓòÉΓòÉΓòÉ
Follow these steps (based on LSP version 1.35) to install LSP before you
install the LAN Distance Remote product:
Note: If you want to use the LSP installation method described here, but the
LAN Distance Remote product is already installed, use the LDREMOVE command to
remove the LAN Distance Remote product.
1. Insert the LSP diskette in the diskette drive, type A:DXMAID, and press
Enter to start the LSP installation program.
2. Press Enter at the IBM Logo panel and information panels to get to the
Environment Information panel.
3. From the Environment Information panel, specify the following options for
your workstation:
Configuration for this computer? Yes
Use existing configuration information? Yes
Do you have adapter option diskettes? Yes
Are you configuring for 2 adapters? No
Do you need 802.2 interface support? Yes
Press Enter.
4. When the Process Adapter Option Diskette panel is displayed, insert the
adapter option diskette in the diskette drive, specify the path that
contains the DOS NDIS files (for example, A:\DOS) and press Enter.
An information panel is displayed when the software driver configuration
is complete.
5. Remove the adapter option diskette from the diskette drive, insert the
LSP diskette, and press Enter to continue LSP installation.
6. From the Selections for Adapter Window, select the appropriate adapter
for your workstation so it is displayed in the Primary Adapter Window.
If your workstation does not have a LAN adapter, select:
IBM Token-Ring Network Adapters with NDIS support (IBMTOK.DOS).
Note: If you do not have a LAN adapter, record your adapter selection
to use when you edit the CONFIG.SYS file.
7. Press the Tab key to get to the Selections for Protocol Window.
8. From the Selections for Protocol Window, select:
IBM DOS IEEE 802.2 Protocol for NDIS (DXME0MOD.SYS)
This selection is displayed in the Protocol Window.
9. From the Selections for Protocol Window, select:
IBM DOS NETBIOS (DXMT0MOD.SYS)
This selection is displayed in the Protocol Window.
10. If you have a LAN adapter and want to ensure that your LAN applications
(such as Personal Communications/3270** or AttachMate**) are running
correctly before installing the LAN Distance product, press PF5.
From the IBM DOS NETBIOS (DXMT0MOD.SYS) panel, change the value for the
Extra SAPs and Extra stations fields to 5. Press PF4 to save your
changes.
11. Press PF4 to begin LSP installation and follow instructions displayed on
the screen.
12. If you do not have a LAN adapter on your workstation, change the
CONFIG.SYS file to avoid an error message when you restart you
workstation.
Use an ASCII text editor to edit the CONFIG.SYS file, and remove the
appropriate device driver statement according to the adapter you selected
in the Selections for Adapter Window.
For example, if you selected:
IBM Token-Ring Network Adapters with NDIS support (IBMTOK.DOS)
delete the following line in the CONFIG.SYS file:
DEVICE=\LSP\IBMTOK.DOS
ΓòÉΓòÉΓòÉ 11.5.1. Adjusting NetBIOS Timers ΓòÉΓòÉΓòÉ
WAN connections do not support the high data transmission speeds supported for
LAN connections. To accommodate slower speeds on the LAN Distance WAN
connection, adjust the NetBIOS timers for all the workstations that participate
in your LAN Distance wide area network.
LAN Distance Connection Servers
LAN Distance Remotes
OS/2 LAN Workstations
ΓòÉΓòÉΓòÉ 11.5.2. Adjusting NetBIOS Timers on LAN Distance Workstations ΓòÉΓòÉΓòÉ
NetBIOS timers are automatically increased when the LAN Distance product is
installed to accommodate line speeds as slow as 9600 bps., and to minimize
connection problems and unnecessary retransmission of data frames on the LAN
Distance connection.
If you experience connection problems, you may need to increase NetBIOS timers
through the Timers tab in the Settings notebook. Use Guidelines for Changing
NetBIOS Timers as a guide to changing NetBIOS timers.
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Table 18. Guidelines for Changing NetBIOS Timers Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé NETBIOS TIMERS Γöé DESCRIPTION OF NETBIOS TIMERS Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé INACTIVITY TIMER Γöé THE VALUE FOR THIS TIMER DETERMINES HOW OFTEN NETBIOS Γöé
Γöé - TI Γöé CHECKS AN INACTIVE LINK TO VERIFY THAT THE LINK IS STILL Γöé
Γöé Γöé OPERATIONAL Γöé
Γöé Γöé Γöé
Γöé Γöé The NetBIOS default value for this timer is 30,000 Γöé
Γöé Γöé milliseconds. Γöé
Γöé Γöé Γöé
Γöé Γöé Increase the setting for this timer if your line speed Γöé
Γöé Γöé is slower than 9600 bps. Γöé
Γöé Γöé Γöé
Γöé Γöé The value for this timer should be set to maintain the Γöé
Γöé Γöé following relationship to the other NetBIOS timers: Γöé
Γöé Γöé Γöé
Γöé Γöé Acknowledgment timer <= Response timer <= Inactivity timeΓöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé RESPONSE TIMER - Γöé THE VALUE FOR THIS TIMER SPECIFIES THE DELAY THAT SHOULD Γöé
Γöé T1 Γöé OCCUR BEFORE RETRANSMITTING AN UNACKNOWLEDGED FRAME Γöé
Γöé Γöé Γöé
Γöé Γöé The NetBIOS default value for this timer is 500 milli- Γöé
Γöé Γöé seconds. The LAN Distance product increases its value Γöé
Γöé Γöé to 10,000 milliseconds. Γöé
Γöé Γöé Γöé
Γöé Γöé Increase the setting for this timer if your line speed Γöé
Γöé Γöé is slower than 9600 bps. Γöé
Γöé Γöé Γöé
Γöé Γöé As a rule, the response timer (T1) should be 2-5 times Γöé
Γöé Γöé larger than the acknowledgement timer (T2). Γöé
Γöé Γöé Γöé
Γöé Γöé The value for this timer should be set to maintain the Γöé
Γöé Γöé following relationship to the other NetBIOS timers: Γöé
Γöé Γöé Γöé
Γöé Γöé Acknowledgment timer <= Response timer <= Inactivity timeΓöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé ACKNOWLEDGEMENT Γöé THE VALUE FOR THIS TIMER SPECIFIES THE DELAY THAT SHOULD Γöé
Γöé TIMER - T2 Γöé OCCUR BEFORE ACKNOWLEDGING A RECEIVED FRAME WHEN THE Γöé
Γöé Γöé NUMBER OF MAXIMUM FRAMES SENT IS LESS THAN THE CONFIG- Γöé
Γöé Γöé URED MAXIMUM Γöé
Γöé Γöé Γöé
Γöé Γöé The NetBIOS default value for this timer is 200 milli- Γöé
Γöé Γöé seconds. The LAN Distance product increases its setting Γöé
Γöé Γöé to 2,000 milliseconds. Γöé
Γöé Γöé Γöé
Γöé Γöé Increase the setting for this timer if your line speed Γöé
Γöé Γöé is slower than 9600 bps. Γöé
Γöé Γöé Γöé
Γöé Γöé The value for this timer should be set to maintain the Γöé
Γöé Γöé following relationship to the other NetBIOS timers: Γöé
Γöé Γöé Γöé
Γöé Γöé Acknowledgment timer <= Response timer <= Inactivity timeΓöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓòÉΓòÉΓòÉ 11.5.3. Adjusting NetBIOS Timers for OS/2 LAN Workstations ΓòÉΓòÉΓòÉ
The NetBIOS timers on LAN workstations accessed by LAN Distance Remotes, such
as an IBM Server domain controller, must be set to the LAN Distance default
settings listed in Guidelines for Changing NetBIOS Timers table in Adjusting
NetBIOS Timers on LAN Distance Workstation.
To adjust NetBIOS timers on a LAN workstation, complete these steps:
1. From an OS/2 command prompt, go to the IBMCOM directory and type LAPS or
MPTS to start the LAPS program. From the logo window, select the
Configure push button.
2. From the Configuration pop-up window, select the Configure LAN transports
radio button, then select the OK push button.
3. From the Current Configuration field in the Configure Workstations
window, verify that the NetBIOS protocol is listed as one of the
protocols configured for your LAN adapter.
If NetBIOS is listed, go to step Adjusting NetBIOS Timers for OS/2 LAN
Workstations.
If NetBIOS is not listed, select NetBIOS from the Protocols field and
select Add to add this protocol to your LAN adapter.
4. In the Current Configuration list box, select NetBIOS to highlight it in
the list box.
5. Select the Edit push button.
6. Click on the scroll bars to locate the Ti, T1, and T2 timer fields. Use
the table in Adjusting NetBIOS Timers on LAN Distance Workstations as a
guide to set these timers to the LAN Distance defaults.
ΓòÉΓòÉΓòÉ 11.6. Changing a LAN Distance Logical Adapter Network Address ΓòÉΓòÉΓòÉ
When you install the LAN Distance Connection Server or LAN Distance Remote
product, a LAN Distance logical adapter network address is assigned to your LAN
Distance Logical Adapter. Your LAN Distance logical adapter network address
must be unique among all the workstations and resources in your LAN Distance
wide area network and it must adhere to the required address format for your
LAN type.
For Token-Ring LANs, the format is:
12-character hex value
Range = 400000000000 through 7FFFFFFFFFFF
For Ethernet LANs, the format is:
12-character hex value in IEEE 802.3 Ethernet format
Range = 020000000000 through FEFFFFFFFFFF
If you switch LAN types, the LAN Distance product automatically converts your
LAN Distance logical adapter network address to the proper format for your
current LAN type.
To change or verify a LAN Distance logical adapter network address on a LAN
Distance Connection Server or LAN Distance Remote, complete these steps:
1. Open the Settings notebook and select the Address tab.
From page 1 of 2, you can change or verify your LAN Distance logical
adapter network address.
Address Tab, Page 1 of 2
Note: Most LAN Distance Remotes use only one or two protocols and
require only one LAN Distance logical adapter network address. If you
require more than five LAN protocols to run your LAN applications,
configure an additional LAN Distance logical adapter network address on
page 2 of 2.
2. Type a 12-character hexadecimal address in the LAN Distance logical
adapter network address field to change this address.
3. Close the Settings notebook to save your changes.
ΓòÉΓòÉΓòÉ 12. Setting Up Some Popular LAN Applications ΓòÉΓòÉΓòÉ
This chapter describes how to set up your LAN Distance Remote and LAN Distance
Connection Server workstations to support some popular network operating
systems and LAN applications.
ΓòÉΓòÉΓòÉ 12.1. Using LAN Server and LAN Requester ΓòÉΓòÉΓòÉ
From your OS/2 or MS Windows LAN Distance Remote, you can use the LAN Requester
product to access a LAN Server. You can also establish a LAN Distance
connection between LAN Server workstations on separate LANs. These
configurations are illustrated in LAN Requester and LAN Server Setup.
LAN Requester and LAN Server Setup
ΓòÉΓòÉΓòÉ 12.1.1. Set Up Considerations ΓòÉΓòÉΓòÉ
Review the following set up considerations for using the LAN Requester and LAN
Server products with the LAN Distance product.
The LAN Distance product supports version 1.12 and higher of the IBM LAN
Server and LAN Requester products.
Install the LAN Server and Requester products before you install the LAN
Distance product.
Install the LAN Distance Remote product on your stand-alone LAN Requester
workstation to establish a connection to a LAN Server workstation.
As shown in Using LAN Server and LAN Requester, the LAN Distance
Connection Server product can be installed on any LAN workstation. It
does not need to be installed on your LAN Server to access resources at
the LAN Server workstation.
If you are using LAN Server or LAN Requester 3.0, install Corrective
Service Diskette (CSD) IPO7001 on:
- every LAN Requester 3.0 workstation using LAN Distance to establish
a connection to a LAN Server
- every LAN Server 3.0 workstation that you will access using the LAN
Distance product.
To obtain CSD IPO7001, contact IBM Software Solutions at 1-800-992-4777
(United States), 1-800-465-2222 (Canada), or 1-800-426-1774
(International).
Recommended configuration changes for LAN Server and LAN Requester are
described in Modifying LAN Server and Requester Configurations.
If you are running version 1.12 or 3.0 of DOS LAN Requester on a MS
Windows LAN Distance Remote, you should install CSD IPO7003. See Using
DOS LAN Requester.
If you are running DOS LAN Requester, complete the steps described in
Changing DOS LAN Requester Performance Parameters.
ΓòÉΓòÉΓòÉ 12.1.2. Modifying LAN Server and Requester Configurations ΓòÉΓòÉΓòÉ
Because of the slower data transfer speeds over the LAN Distance connection,
you can experience problems with large file transfers, the XCOPY command,
session timeouts, and logging on to a LAN Server.
To avoid these problems, make the following modifications for:
every LAN Server that has resources you will access using the LAN
Distance product.
every LAN Requester workstation using the LAN Distance product.
ΓòÉΓòÉΓòÉ 12.1.3. Modify NetBIOS Timers for LAN Server Workstations ΓòÉΓòÉΓòÉ
NetBIOS timers are automatically adjusted when the LAN Distance product is
installed on a workstation. If the LAN Distance product is not installed on a
LAN Server that you need to access, manually adjust the NetBIOS timers through
LAPS. LAN Distance default settings for NetBIOS timers are listed in Adjusting
NetBIOS Timers for OS/2 LAN Workstations.
ΓòÉΓòÉΓòÉ 12.1.3.1. Modify the LAN Server SRVHEURISTICS Parameter ΓòÉΓòÉΓòÉ
1. Locate the SRVHEURISTICS parameter in the LAN Server IBMLAN.INI file.
2. Change bit 15 (marked by an ) in the SRVHEURISTICS parameter from 1 to
any number from 2 to 8. This sets the timeout value to the maximum value
of 127 seconds. If this does not improve performance, set the timeout
value to infinite by setting bit 15 to 9.
1
(bit position counter->) 0123456789012345678
SRVHEURISTICS = 1111014111131102133
ΓòÉΓòÉΓòÉ 12.1.3.2. Increase the LAN Server SESSTIMEOUT Parameter ΓòÉΓòÉΓòÉ
1. Locate the SESSTIMEOUT parameter, in the LAN Server IBMLAN.INI file.
2. Increase this value from 45 to 300 seconds to help prevent a LAN server
session from timing out.
ΓòÉΓòÉΓòÉ 12.1.3.3. Modify the LAN Requester WRKHEURISTICS Parameter ΓòÉΓòÉΓòÉ
1. Locate the WRKHEURISTICS parameter in the LAN Requester IBMLAN.INI file.
2. Change bits 11, 12, and 13 (marked by an ) in the WRKHEURISTICS
parameter to 0.
1 2 3
(bit position counter->) 0123456789012345678901234567890123
WRKHEURISTICS = 1111111121300011110001011120111221
ΓòÉΓòÉΓòÉ 12.1.3.4. Increase the LAN Requester SESSTIMEOUT Parameter ΓòÉΓòÉΓòÉ
1. Locate the SESSTIMEOUT parameter, in the LAN Server IBMLAN.INI file.
2. Increase this value from 45 to 300 seconds to help prevent a LAN server
session from timing out.
ΓòÉΓòÉΓòÉ 12.1.4. Using DOS LAN Requester ΓòÉΓòÉΓòÉ
The LAN Distance product supports versions 1.12 and later of DOS LAN Requester.
If you are using DOS LAN Requester 3.0 with the MS Windows LAN Distance Remote
product, install Corrective Service Diskette (CSD) IPO7003.
To obtain CSD IPO7003 for DOS LAN Requester, contact IBM Software Solutions at
1-800-992-4777 (United States), 1-800-465-2222 (Canada), or 1-800-426-1774
(International).
If you cannot obtain CSD IPO7003, edit the DOSLAN.INI file found in the DOSLAN
directory, and change the /NMS:0 parameter to /NMS:3. If this parameter does
not exist, then add /NMS:3 to any of the existing parameter lines or a new
line.
ΓòÉΓòÉΓòÉ 12.1.5. Changing DOS LAN Requester Performance Parameters ΓòÉΓòÉΓòÉ
Make the following additions and changes to performance parameters in the
DOSLAN.INI file before starting DOS LAN Requester on the LAN Distance Remote:
1. From a DOS command prompt, go to the DOSLAN directory and locate the
DOSLAN.INI file.
2. Use an ASCII editor to add the following statement to the DOSLAN.INI
file:
/NMS:3 /NVS:2 /API
3. Set the /NBS (network buffer size) parameter to match the value for the
sizereqbuf parameter in the IBMLAN\IBMLAN.INI file on the IBM LAN Server.
For example, if the value for the sizereqbuf in the IBMLAN.INI file is
4096, set the /NBS parameter in the DOSLAN.INI file to:
/NBS:4K
4. Change the /BBS (big buffer size) parameter so it is 1K larger than the
/NBS parameter specified in step Changing DOS LAN Requester Performance
Parameters.
5. Change the fourth character in the /WKS (DLR heuristics) parameter to 0
and the last character to 1.
/WKS:111021101021211
For more information about tuning DOS LAN Requester performance parameters,
see IBM OS/2 LAN Server Network Administrator Reference Volume 2: Performance
Tuning.
ΓòÉΓòÉΓòÉ 12.2. Microsoft LAN Manager ΓòÉΓòÉΓòÉ
If you are using Microsoft LAN Manager with LAN Distance, complete the setup
and tuning steps in the following sections.
ΓòÉΓòÉΓòÉ 12.2.1. OS/2 - LAN Manager Requester ΓòÉΓòÉΓòÉ
Install LAN Manager Requester for OS/2
NOTE: Because LAN Distance requires OS/2 version 2.0 or higher, you must
install Microsoft LAN Manager Requester version 2.2.
When the LAN Manager Requester installation program prompts you for your
LAN adapter type, select your LAN adapter type from the list. If your
workstation does not have a LAN adapter, select ANY LAN adapter type in
the list. Do not select "No adapter". This is the easiest way to get
LAN Manager Requester set up.
Copy your CONFIG.SYS to CONFIG.LAN. (optional)
Copy this file if you have a LAN adapter in your workstation and you
intend to use LAN Manager in both a LAN-attached environment and in a
remote environment with LAN Distance. You will use the (.LAN) file when
you are in a LAN-attached environment.
You can also copy your \LANMAN\LANMAN.INI file to \LANMAN\LANMAN.LAN at
this point. Keeping a separate copy of this for your LAN-attached
environment will give you slightly improved performance when you are
directly attached to the LAN.
Edit your CONFIG.SYS:
1. Delete or REM the PROTMAN.OS2 device statement from your CONFIG.SYS:
REM DEVICE=C:\LANMAN\PROTMAN\DRIVERS\PROTMAN.OS2
2. Delete or REM the DEVICE= statement for your LAN adapter. Perform
this step EVEN if you have a LAN adapter in your workstation. For
example, if you selected IBM Token Ring adapter when you installed
LAN Manager Requester, delete or REM the IBMTOK.OS2 driver statement
in your CONFIG.SYS:
REM DEVICE = C:\...\IBMTOK.OS2
Edit your STARTUP.CMD:
(Temporarily) remark out the starting of the LAN Manager Requester:
REM NET START WORKSTATION
REM NET LOGON ...
Edit LANMAN.INI:
1. If you are using LAN Manager with NetBEUI, edit your net statement
to look like the following:
net1 = netbios$, 0, nb30
LAN Distance cannot start unless you make this change.
2. Add/change the wrkheuristics parameter in the [workstation] section
to look like the following:
[workstation]
; 0 1 2 3
; 01234567890123456789012345678901234
wrkheuristics = 11111111213000111110010111200112211
If you already have a wrkheuristics parameter, the only changes that
you need to change for LAN Distance are to change the 11th, 12th,
and 13th bits (counting from 0) from a 1 to a 0. These are the RAW
data transfer protocol bits. See the Microsoft LAN Manager
Administrator's Reference for a full description of these
heuristics.
3. Edit/add the sesstimeout value in the [workstation] section as
follows:
[workstation]
sesstimeout = 300
Install the LAN Distance Remote for OS/2 product and use the Basic
Settings Option to configure your initial setup.
Edit CONFIG.SYS
Check/edit statements in your CONFIG.SYS to make sure they look like the
following. Make sure they appear in this relative order.
LIBPATH=C:\IBMCOM\DLL;C:\LANMAN\NETLIB;....
;only want IBMCOM version of this
DEVICE=C:\IBMCOM\PROTMAN.OS2 /I:C:\IBMCOM
;only want IBMCOM version of this
DEVICE=C:\IBMCOM\PROTOCOL\NETBEUI.OS2
RUN=C:\IBMCOM\PROTOCOL\NETBIND.EXE
RUN=C:\IBMCOM\LANMSGEX.EXE
;only want IBMCOM version of this
DEVICE=C:\IBMCOM\PROTOCOL\NETBIOS.OS2
DEVICE=C:\WAL\WCLVPCM.OS2
DEVICE=C:\IBMCOM\MEMMAN.OS2
DEVICE=C:\IBMCOM\VLAN.OS2
RUN=C:\IBMCOM\VLANINIT.EXE
DEVICE=C:\IBMCOM\MACS\PDFH.OS2
DEVICE=C:\IBMCOM\MACS\MACFH.OS2
DEVICE=C:\IBMCOM\MACS\WCLCPMAC.OS2
; have to move these to here
DEVICE=C:\LANMAN\NETPROG\RDRHELP.SYS
IFS=C:\LANMAN\NETPROG\NETWKSTA.SYS /i:C:\LANMAN
DEVICE=C:\LANMAN\NETPROG\NETVDD.SYS
Note: If you install LAN Distance before you install LAN Manager
Requester, your CONFIG.SYS will look quite a bit different than this. You
may notice multiple versions of PROTMAN.OS2 and NETBEUI.OS2 being loaded.
Be sure to REM out the versions in the \LANMAN paths, and use the
versions in the \IBMCOM path.
Copy your CONFIG.SYS to CONFIG.REM. (optional)
Copy this file if you have a LAN adapter in your workstation and you
intend to use LAN Manager in both a LAN-attached environment and in a
remote environment with LAN Distance. You will use the (.REM) file when
you are using LAN Distance in a remote environment.
If you are keeping a separate copy of \LANMAN\LANMAN.INI for your LAN
environment, you must copy \LANMAN\LANMAN.INI to \LANMAN\LANMAN.REM.
Complete steps further below under "LAN Manager Server".
"SHUTTLING" on an OS/2 Workstation
The Shuttle feature in the LAN Distance Remote for OS/2 does not work
with LAN Manager Requester. The steps above have enabled you to manually
"shuttle" between a LAN-attached and a remote environment.
When you are LAN-attached, simply copy your CONFIG.LAN to CONFIG.SYS and
LANMAN.LAN to LANMAN.INI (if appropriate) and restart your workstation.
When you are in a remote environment, copy your .REM files and restart
your workstation.
TCP/IP NOTE:
The LAN Manager TCP/IP protocol does not work with LAN Distance.
ΓòÉΓòÉΓòÉ 12.2.2. LAN Manager Server ΓòÉΓòÉΓòÉ
Complete the following tuning steps so that the LAN Manager server can work
with the slower LAN Distance WAN connections:
Edit the LANMAN.INI file:
1. Edit the sesstimeout value in the [workstation] section as follows:
[workstation]
sesstimeout = 300
2. Add a srvheuristics parameter (or change the current one) in the
[server] section:
[server]
; 0 1
; 01234567890123456789
srvheuristics = 11110151111211021331
If you already have a srvheuristics parameter, the only change
necessary for LAN Distance is to change bit 15 from a 0 to a 2. This
will increase the Opportunistic Lock Timeout. See the Microsoft LAN
Manager Administrator's Reference for a full description of these
heuristics.
If you are running the NETBIOS protocol over a LAN Distance WAN
connection, edit the PROTOCOL.INI file:
The NETBIOS timer values must be relaxed to handle the slower WAN
connection. Add or the change the following parameters in the
NETBEUI_XIF section:
[NETBEUI_XIF]
TI = 60000
T1 = 10000
T2 = 2000
ΓòÉΓòÉΓòÉ 12.3. Using the Communications Manager/2 3270 Emulation Feature ΓòÉΓòÉΓòÉ
A LAN Distance Remote can dial into a LAN and use the 3270 Emulation feature of
IBM Communication Manager/2 to access a LAN-attached host controller as shown
in Communication Manager/2 Set Up.
Communication Manager/2 Set Up
Review the following set up considerations for using Communications Manager/2
and its 3270 emulation feature.
The LAN Distance product supports versions 1.0 and 1.1 of the
Communications Manager/2 product.
Version 1.1 of the Communications Manager/2 product routes data frames
using general broadcast instead of source routing frames (used in version
1.0 of the Communications Manager/2 product).
If you are running version 1.1, verify that the hop count defined at the
LAN Distance bridge is large enough to allow Communication Manager/2
general broadcast frames to reach the receiving workstation. See Example
2: Using OS2PING to Verify the LAN Distance Bridge Hop Count.
Install Communications Manager/2 before you install the LAN Distance
product.
If you are running Communications Manager/2 with SNA, configure the 802.2
protocol when you install Communications Manager/2.
Configure the 802.2 LAN protocol on the LAN Distance Remote where the
Communications Manager/2 product is installed. See Configuring
Additional LAN Protocols Required for Your OS/2 LAN Applications.
Set the maximum number of network bridge hops at the LAN Distance bridge
so the data frames sent from the LAN Distance Remote running 3270
emulation can be received at the 3745 controller. See Defining
Configuration Values for the LAN Distance Bridge.
The LAN Distance product and Communications Manager/2 cannot
simultaneously support ISDN. If you plan to run LAN Distance over an
ISDN connection, you cannot simultaneously run Communications Manager/2
if it is configured for ISDN.
To use the CM/2 v1.11 PSTN "SNA Phone Connections" feature with LAN
Distance PSTN support, apply a CM/2 file for APAR JR08194. This file can
be obtained through IBM Service and Support by referencing this APAR
number.
ΓòÉΓòÉΓòÉ 12.4. Using NetWare Server and NetWare Requester ΓòÉΓòÉΓòÉ
A LAN Distance Remote running the NetWare Requester product can remotely access
a NetWare Server by dialing a LAN Distance Connection Server on the NetWare
LAN.
From your NetWare Requester workstation, you can use the LAN Distance product
to establish a connection to a NetWare Server as shown in NetWare Requester and
NetWare Server Set Up.
NetWare Requester and NetWare Server Set Up
The LAN Distance product supports the following versions of the NetWare
products:
NetWare Requester for OS/2 versions 2.x, 3.1x, 4.0 (or later)
NetWare Server versions 2.x, 3.1x, 4.0 (or later)
The LAN Distance product uses the IBM NetWare Requester Support protocol
driver, ODI2NDI, to support the NetWare products. ODI2NDI can operate
concurrently with the NetBIOS, IEEE 802.2, and TCP/IP LAN protocols over a
single LAN Distance connection.
ΓòÉΓòÉΓòÉ 12.4.1. Setting Up a NetWare Server ΓòÉΓòÉΓòÉ
On a Token-Ring LAN, your LAN Distance Connection Server uses source-routing
bridge software to support connections with LAN Distance Remotes. To run a
NetWare Server with the LAN Distance product on a Token-Ring LAN, load the
NetWare source-routing driver, ROUTE.NLM, on the NetWare Server.
To load the NetWare source-routing driver, type LOAD ROUTE BOARD=x (x is the
adapter number of the NetWare Server's LAN adapter). See your NetWare
documentation for more information.
You do not need to restart the NetWare Server to enable ROUTE.NLM.
The ROUTE.NLM driver adds source routing information to all LAN data frames
transmitted by the NetWare Server's LAN adapter.
The ROUTE.NLM driver is required only for NetWare Servers that are accessed
remotely.
Note: No special setup is required to remotely access a NetWare Server that
is on an Ethernet LAN.
ΓòÉΓòÉΓòÉ 12.4.2. Setting Up a NetWare Requester for OS/2 ΓòÉΓòÉΓòÉ
To set up your LAN Distance Remote to use the NetWare Requester for OS/2
product to access a NetWare Server over a LAN Distance connection:
1. Install the NetWare Requester product before installing the LAN Distance
Remote product.
2. During NetWare installation, select the appropriate network interface
card driver:
If your NetWare Server is on an Ethernet LAN, select the appropriate
network interface card driver for the Ethernet adapter.
If your NetWare Server is on a Token-Ring LAN, select TOKEN.SYS as
the network interface card driver.
This places the ROUTE.SYS device driver statement in your CONFIG.SYS
file so the Token-Ring data frames contain the source routing
information required by the LAN Distance product.
3. Install the LAN Distance Remote product on your workstation. See
"Installing the LAN Distance Product Using Diskettes" in the LAN Distance
Remote Guide.
4. Open the Settings notebook and select the LAPS tab, then select the LAPS
push button to open the LAPS Configure Workstation window.
5. From the Current Configuration list box, select the LAN Distance Logical
Adapter.
6. From the Protocols list box, select the IBM NetWare Requester Support
protocol.
Select Add from the Protocols list box to add IBM NetWare Requester
Support to the protocols currently configured for the LAN Distance
logical adapter.
7. In the Current Configuration field, select the LAN Distance Logical
Adapter and select Edit.
8. Record the 12-character hexadecimal address displayed in the Network
adapter address field and select Cancel.
9. In the Current Configuration field, select NetWare Requester Support and
select Edit.
The Parameters for IBM NetWare Requester Support window (Parameters for
IBM NetWare Requester Support) is displayed.
Parameters for IBM NetWare Requester Support
10. Enter the 12-character hexadecimal value you recorded earlier in the
Network adapter address field.
11. Configure the frame header support to match the type of LAN frame used by
your NetWare Server. Type Yes in the appropriate field and select OK.
If you do not know the LAN frame type, see your LAN administrator. For
Token-Ring networks, the most common LAN frame type is TOKEN-RING. For
Ethernet networks, the most common LAN frame type is ETHERNET_ 802.3.
12. To save your changes, exit LAPS, and close the Settings notebook.
Note: Before restarting your workstation to activate these changes,
complete the steps in NetWare Connection ID Error Message (NWD0115 or
REQ0815). for the version of NetWare Requester installed on your
workstation.
For a NetWare server to support clients using packet burst in a WAN
environment, the NetWare server must have PBURST.EXE or later fix.
PBURST.EXE has packet burst files with a new packet burst algorithm for WAN
links to fix problems where:
Burst retries could saturate WAN links due to low retry timeout values.
Workstations hang when duplicate packets from a previous burst are
received in the middle of the current burst.
PBURST.NLM is for use on NetWare 3.11 file servers. PBWANFIX.NLM (which
requires patchman) is for use on NetWare 3.12 and 4.01 file servers.
This NetWare fix is available through IBM Support and Service by referencing
APAR IC07834.
ΓòÉΓòÉΓòÉ 12.5. NetWare Connection ID Error Message (NWD0115 or REQ0815). ΓòÉΓòÉΓòÉ
If you are running the NetWare Requester on your LAN Distance Remote, when you
start your LAN Distance Remote workstation you will receive a NetWare error
message indicating that the NetWare Requester cannot locate the NetWare Server.
attempts to locate the NetWare Server on the LAN before a LAN Distance
connection is established.
The following recommendations are for running OS/2 NetWare Requester. Note
that a few of the steps only apply to a token ring environment.
To improve performance, copy frequently used NetWare utilities to the
OS/2 NetWare requester. For example: LOGON.EXE, LOGOUT.EXE, MAP.EXE and
SLIST.EXE.
The following is a sample NET.CFG. Use this configuration when first
attempting to use the OS/2 NetWare requester over LAN Distance. Do not
use the normal buffer size of 4202 for a token ring environment, use
1514.
NetWare Requester
Default Login Drive L
cache buffers 30
directory services off
Link Support
Buffers xx 1514
For a token ring environment, LAN Distance requires that all frames have
source routing information. This means that ROUTE.NLM must be loaded on
the NetWare server and ROUTE.SYS must be loaded for the OS/2 NetWare
requester.
The OS/2 NetWare requester must have a fix for NWREQ.SYS.
The OS/2 NetWare requester has a fixed timeout value for resending frames
when there has been no response from the server. Over a slow link this
can cause frames to be retransmitted several times causing slow
performance and REQ1040 and REQ1039 error messages from NETWARE.
The NWREQ.SYS fix increases the timeout value. There is a side effect of
this fix. When the LAN Distance connection is dropped, it will take
several minutes for NetWare to destroy the default drive due to the
longer timeout value. You may notice this when you are trying to
shutdown OS/2.
This NetWare fix is available through IBM Support and Service by
referencing APAR IC07834.
ΓòÉΓòÉΓòÉ 12.5.1. NetWare Requester for OS/2 Version 2.1 (or Later). ΓòÉΓòÉΓòÉ
If you are running NetWare Requester for OS/2 Version 2.1 (or later), error
message REQ0815 displays when you start your LAN Distance Remote. To clear the
error, press the Enter key.
After you establish a connection to the LAN Distance Connection Server, the
NetWare Requester will automatically locate the NetWare Server and operate
normally.
ΓòÉΓòÉΓòÉ 12.5.2. NetWare Requester for OS/2 Versions Prior to 2.1 ΓòÉΓòÉΓòÉ
If you are running a version of the NetWare Requester released prior to version
2.1, in addition to receiving error message NWD0115, a delay of approximately
3-1/2 minutes occurs when you start the LAN Distance Remote. During the delay,
only a blank OS/2 desktop is displayed. After the delay, error message SYS0059
is displayed. When you establish a connection to the LAN Distance Connection
Server, the NetWare Requester can locate the NetWare Server and operate
normally.
If you want to avoid these error messages and the delay when starting your LAN
Distance Remote, perform the following steps.
1. Use an ASCII editor to comment out the following statement in your
CONFIG.SYS file:
REM RUN C:\NETWARE\NWDAEMON.EXE
2. Restart your workstation and establish a connection to your LAN Distance
Connection Server. Before logging on to the NetWare Server, type the
following at an OS/2 command prompt:
DETACH C:\NETWARE\NWDAEMON.EXE
3. Each time you restart your workstation, before logging on to the NetWare
Server, complete step NetWare Requester for OS/2 Versions Prior to 2.1.
ΓòÉΓòÉΓòÉ 12.5.3. Setting Up NetWare Requester for MS Windows ΓòÉΓòÉΓòÉ
You can set up NetWare Requester support during LAN Distance installation or
after you install the LAN Distance product. The NetWare Requester product must
be installed before you can enable NetWare Requester support.
To enable NetWare Requester support during LAN Distance installation:
1. When the NetWare Directory window displays, specify the fully-qualified
path for the drive and directory where the NetWare Requester product is
installed on your workstation (for example, c:\NWCLIENT).
2. When the NetWare Frame Type window displays, specify the type of frame
header used by the NetWare Server.
For Token-Ring LANs, the most common frame type is TOKEN-RING. For
Ethernet LANs, the most common frame type is ETHERNET_802.3. If you do
not know your frame type, see your LAN administrator.
To enable NetWare Requester support after the LAN Distance product is
installed, enable NetWare Requester support through the Settings notebook:
1. Open the LAN Distance group window.
2. Double-click on the Settings icon to display the Settings notebook.
3. Select the NetWare tab.
4. Select Enable NetWare Requester Support
5. In the NetWare Path field, specify the drive and directory where the
NetWare Requester product is installed on your workstation (for example,
c:\NWCLIENT).
6. In the Frame Type field, specify the type of frame header used by the
NetWare Server.
For Token-Ring LANs, the most common frame type is TOKEN-RING. For
Ethernet LANs, the most common frame type is ETHERNET_802.3. If you do
not know your frame type, see your LAN administrator.
7. Close the Settings notebook.
8. When the LAN Distance-Settings dialog box is displayed, select the Yes
push button to save your changes.
9. Shut down and restart your workstation.
ΓòÉΓòÉΓòÉ 12.5.4. Running NetWare Requester on a LAN Distance Remote ΓòÉΓòÉΓòÉ
Review the following considerations for running NetWare Requester on a LAN
Distance Remote:
ΓòÉΓòÉΓòÉ 12.5.4.1. Copying Utilities to the NetWare Requester ΓòÉΓòÉΓòÉ
Because the WAN connection cannot efficiently transfer large data files, you
should copy frequently used NetWare utilities from the NetWare Server to a
local drive on the NetWare Requester. Some frequently used utilities include
LOGON.EXE, LOGOUT.EXE, MAP.EXE and SLIST.EXE. These utilities are stored in
the SYS:PUBLIC\ directory on the NetWare Server. By running these utilities
from a local drive on the LAN Distance Remote, you avoid the delay involved in
loading large files over the LAN Distance connection.
ΓòÉΓòÉΓòÉ 12.5.4.2. Verifying the MaxFrame Value Defined at the NetWare Server ΓòÉΓòÉΓòÉ
When NetWare Requester is installed on the LAN Distance Remote, the MaxFrame
parameter in the [SOCKDD_MOD] section of the WAL\PROTOCOL.INI file is set to
the default MaxFrame value (1514) for the NetWare Server. The MaxFrame values
defined for the NetWare Requester and NetWare Server should match so these
workstations send compatible frame sizes.
For the NetWare Requester, make sure the MaxFrame values in the [SOCKDD_MOD]
and [COMx] sections of the WAL\PROTOCOL.INI match. (COMx identifies the COM
port you are using for LAN Distance; for example, COM1 or COM2.)
ΓòÉΓòÉΓòÉ 12.6. Using TCP/IP for OS/2 ΓòÉΓòÉΓòÉ
The LAN Distance product supports version 1.2.1 and later of the Using TCP/IP
for OS/2 product. You can install TCP/IP on these types of workstations:
LAN-attached workstation that you are setting up as a LAN Distance
Remote.
Stand-alone workstation that you are setting up as a LAN Distance Remote.
ΓòÉΓòÉΓòÉ 12.7. Setting Up TCP/IP on a LAN-Attached Workstation ΓòÉΓòÉΓòÉ
To set up TCP/IP on a LAN-attached workstation or on a stand-alone workstation
that already has a LAN adapter installed:
1. Install and configure Using TCP/IP for OS/2 using the automated tool,
ICAT, shown in TCP/IP Version 3.0.
TCP/IP Version 3.0
2. From an OS/2 command line, use the COPY command to copy these files from
\TCPIP\BIN to \IBMCOM\PROTOCOL.
TCPIP.NIF
INET.SYS
IFNDIS.SYS
3. Shut down and restart your workstation.
4. Use LAPS to configure the TCP/IP protocol for your LAN adapter.
From an OS/2 command line, go to the IBMCOM directory and type LAPS or
MPTS to start the LAPS program.
LAPS Logo Window
5. From the logo window (shown in LAPS Logo Window), select the Configure
push button. From the Configure pop-up window, select the Configure LAN
transports radio button, and the Continue push button to open the
Configure Workstation window.
6. From the Configure Workstation window (shown in LAPS Configure
Workstation Window), be sure the Current Configuration list box displays
your LAN adapter. Otherwise, select your LAN adapter from the Network
Adapters field, and select the Add push button to add it to the Current
Configuration list box.
LAPS Configure Workstation Window
7. From the Protocols list box, select the IBM TCP/IP protocol. Select the
Add push button to add this protocol to your LAN adapter.
8. Select OK to exit the Configure Workstation window.
9. Select the Exit push button from the LAPS logo window to exit LAPS.
10. Shut down and restart your workstation before you complete step Setting
Up TCP/IP on a LAN-Attached Workstation.
11. Install the LAN Distance product.
12. Shut down and restart your workstation.
Note: You can use the shuttle feature to switch between the LAN-attached
configuration and the standalone LAN Distance Remote configuration. See "Using
the Shuttle Feature for OS/2" in the LAN Distance Remote Guide.
ΓòÉΓòÉΓòÉ 12.7.1. Setting Up TCP/IP on a Stand-Alone Workstation ΓòÉΓòÉΓòÉ
To set up TCP/IP on a stand-alone Remote that does not have a LAN adapter
installed:
1. Install the LAN Distance product.
2. Shut down and restart your workstation.
3. Install and configure TCP/IP using the automated tool, ICAT, shown in
TCP/IP Version 3.0 in Using TCP/IP for OS/2.
4. From an OS/2 command line, use the COPY command to copy these files from
\TCPIP\BIN to \IBMCOM\PROTOCOL.
TCPIP.NIF
INET.SYS
IFNDIS.SYS
5. Shut down and restart your workstation.
6. Add the TCP/IP protocol to the LAN Distance Logical Adapter.
a) From the LAPS tab in the Settings notebook, select the LAPS push
button to open the LAPS Configure Workstation window (shown in LAPS
Configure Workstation Window).
You can also access the LAPS program from an OS/2 command line. Go
to the IBMCOM directory and type LAPS to start the LAPS program.
b) Steps for adding TCP/IP to the LAN Distance Logical Adapter are
listed in Setting Up TCP/IP on a LAN-Attached Workstation through
Setting Up TCP/IP on a LAN-Attached Workstation.
.
LAPS Configure Workstation Window
7. After you shut down and restart you workstation, you can verify that
TCP/IP is configured correctly. Go to the LAPS tab in the Settings
notebook, and select the LAPS push button to open the LAPS Configure
Workstation window.
If TCP/IP is configured for the LAN Distance Logical Adapter, it is added
to the LAN Distance Logical Adapter in the Current Configuration list
box, as shown in LAPS Configure Workstation Window.
LAPS Configure Workstation Window
ΓòÉΓòÉΓòÉ 12.8. Using TCP/IP for DOS ΓòÉΓòÉΓòÉ
Install TCP/IP for DOS on a MS Windows workstation before you install the LAN
Distance Remote product.
If you installed TCP/IP for DOS after you installed the LAN Distance Remote
product, you must follow these steps for TCP/IP to work:
1. Use an ASCII editor to edit the CONFIG.SYS file, and be sure that the
TCP/IP DEVICE= statement appears after the section of LAN Distance
configuration statements. The following statement is an example TCP/IP
DEVICE= statement:
DEVICE=C:\TCPDOS\BIN\DOSTCP.SYS
2. Use an ASCII text editor and ensure that the TCP/IP section is copied
from the \LSP\PROTOCOL.INI file to the C:\WAL\PROTOCOL.INI file, where
C:\WAL is the correct drive and pathname of your WAL directory.
Change the Bindings value to SOCKDD_MOD, as shown below:
Bindings=SOCKDD_MOD
3. Use an ASCII text editor to add the following line to the AUTOEXEC.BAT
file:
CALL TCPSTART
ΓòÉΓòÉΓòÉ 12.9. Special Considerations for Running OS/2 802.2 Applications ΓòÉΓòÉΓòÉ
If you experience problems running 802.2 applications, such as IBM
Communication Manager, you may need to increase 802.2 timers through LAPS:
1. Open the Settings notebook and select the LAPS tab, then select the LAPS
push button to open the LAPS Configure Workstation window shown in LAPS
Configure Workstation Window in Setting Up TCP/IP on a LAN-Attached
Workstation.
2. From the Current Configuration list box, select the IBM IEEE 802.2
protocol.
3. Select the Edit push button to increase the Group 1 response timer - T1
and the Group 2 response timer - T2 for the IBM IEEE 802.2 protocol.
4. Select OK to exit the Configure Workstation window and return to the LAPS
tab in the Settings notebook.
5. From the LAPS tab, double-click on the system menu symbol in the upper
left corner to close the Settings notebook and save changes.
6. Shut down and restart your workstation.
ΓòÉΓòÉΓòÉ 12.10. Installing LSP After the LAN Distance Remote Is Installed ΓòÉΓòÉΓòÉ
This section describes how to install LAN Support Program (LSP) for 802.2
support after the LAN Distance Remote product is installed.
Use this method to install LSP only if one of the following statements apply.
If none of these statements apply, see Installing LSP Before You Install the
LAN Distance Product.
Your workstation does not have a LAN adapter, AND you have no adapter
option diskette available.
Note: Some versions of LSP may include an adapter option on the LSP
diskette.
You cannot remove the LAN Distance Remote product before installing LSP.
You installed LSP without NDIS 802.2 support.
The following steps are based on LSP version 1.35:
1. Insert the LSP diskette in the diskette drive, type A:DXMAID, and press
Enter to start the LSP installation program.
2. Press Enter to get past the IBM logo screen and Information panels to the
Environment Information panel.
3. From the Environment Information panel, specify the following options for
your workstation:
Configuration for this computer? Yes
Use existing configuration information? Yes
Do you have adapter option diskettes? No
Are you configuring for 2 adapters? No
Do you need 802.2 interface support? Yes
Press Enter.
4. From the Selections for Adapter Window, select:
SOCKDD_MOD
The selection is displayed in the Primary Adapter Window.
5. Press the Tab key to get to the Selections for Protocol Window.
6. From the Selections for Protocol Window, select:
IBM DOS IEEE 802.2 Protocol for NDIS (DXME0MOD.SYS)
This selection is displayed in the Protocol Window.
7. From the Selections for Protocol Window., ensure that the following
protocol is not selected:
IBM DOS NETBIOS (DXMT0MOD.SYS)
This selection should not be displayed in the Protocol Window.
8. Press PF4 to begin LSP installation and follow any further instructions.
9. Use an ASCII text editor and remove the following statement from the
AUTOEXEC.BAT file:
\LSP\NETBIND
10. Use an ASCII text editor and make the following changes to the CONFIG.SYS
file:
a) Replace the following LSP protman device statement:
DEVICE=\LSP\PROTMAN.DOC /I:\LSP
with this LAN Distance protman device statement:
DEVICE=C:\WAL\PROTMAN.DOS /I:C:\WAL
where C:\WAL is the correct drive letter and path for the WAL
directory in BOTH places in the statement.
b) Ensure that the following device statements are in the CONFIG.SYS
file in this order:
DEVICE=C:\WAL\PROTMAN.DOS /I:C:\WAL
DEVICE=\LSP\DXMA0MOD.SYS 001
DEVICE=C:\WAL\DXMJ0MOD.SYS
DEVICE=\LSP\DXME0MOD.SYS 001
where C:\WAL is the correct drive letter and path for the WAL
directory.
c) The LSP install program may add a REM statement that instructs you
to remove some DEVICE= statements. Remove only the REM statement.
DO NOT remove any DEVICE= statements.
11. The LSP install program adds a section defining the 802.2 support to the
\LSP\PROTOCOL.INI file. You must copy this section from the
\LSP\PROTOCOL.INI file to the \WAL\PROTOCOL.INI file.
Do not copy the entire PROTOCOL.INI file. Move only the following
section defining the 802.2 support:
[DXME0_xxx]
DriverName = DXME0$
Bindings = VLANMAC_MOD
where xxx is different, depending on which LSP version you are
installing.
Copy this section to the bottom of the \WAL\PROTOCOl.INI file.
12. Shut down and restart your workstation.
The following are 2 additional steps that are required for a token ring
environment:
1. In a token ring environment, run PCCONFIG and make sure End Node Source
Routing is enabled.
2. Optionally, the Banyan Server can be configured to use Source Level
Routing (SLR). This is done under the Manage Communications option.
However, the server will use SLR in all responses to clients that are
using SLR.
ΓòÉΓòÉΓòÉ 12.11. Using Banyan VINES ΓòÉΓòÉΓòÉ
The LAN Distance product supports VINES Revision 4.11(5), 5.5x (or later) VINES
NDIS device drivers. Requester and Banyan VINES Server products are described
in this section.
After installing the Banyan VINES Requester product, modify the
CONFIG.SYS file.
Configure source routing for the Banyan VINES Requester product.
After installing the LAN Distance Remote product on the Banyan VINES
Requester workstation, modify the PROTOCOL.INI file.
Configure source routing for the Banyan VINES Server.
ΓòÉΓòÉΓòÉ 12.11.1. Setting Up the Banyan VINES Requester ΓòÉΓòÉΓòÉ
1. Install the Banyan VINES Requester product using the VCLIENT command, or
manually install the product and copy the appropriate NDIS and VINES
device drivers.
Refer to the Banyan VINES manual (Managing VINES Workstations) for
installation support.
2. When the Banyan VINES Requester product is installed, use an ASCII editor
to add the following statement (if it does not already exist) to the end
of the CONFIG.SYS file.
DEVICE=x:\VINESDRIVERS\BN_NDIS\NDISBAN2.SYS
x represents the drive where the Banyan VINES Requester product is
installed.
3. To configure source routing on the Banyan VINES Requester, from an OS/2
command prompt, go to the VINES directory and type PCCONFIG.
Select Network Card Settings. Make sure Enable EndNode Source Routine is
set to Y.
4. Install the LAN Distance Remote product on the Banyan VINES Requester
workstation.
Whether you use Basic Settings or the Settings notebook for
configuration, complete step Setting Up the Banyan VINES Requester
before shutting down your workstation.
Before you complete step Setting Up the Banyan VINES Requester, the
LAN Distance Remote must be shuttled to the stand-alone
configuration.
- If you install the LAN Distance Remote product on a
LAN-attached workstation, before installation is done, the
Shuttle message window displays. Select Yes to shuttle your
workstation to the stand-alone environment.
- If you install the LAN Distance Remote product on a stand-alone
workstation, the stand-alone configuration is active.
5. After LAN Distance Remote installation, but before you shut down and
restart the workstation, use an ASCII editor to edit the
IBMCOM\PROTOCOL.INI file.
Add or modify the [VINES_nif] section of the PROTOCOL.INI file to match
the following:
[VINES_nif]
DriverName = NDISBAN$
Bindings = PDFH_nif
6. Shut down and restart your workstation.
7. Start the LAN Distance Remote product.
8. To start the Banyan VINES Requester product, from an OS/2 command prompt,
go to the VINES directory, and type BAN.
ΓòÉΓòÉΓòÉ 12.11.2. Configuring Source Routing for the Banyan VINES Server ΓòÉΓòÉΓòÉ
1. From the Operator Menu, select System Maintenance. Then, select
Configure/Diagnose Server.
2. Select Add Card/Change Card Configuration.
3. Make sure Enable End Node Source Routing is set to Y.
ΓòÉΓòÉΓòÉ 12.11.3. Additional Tips for Using Banyan VINES ΓòÉΓòÉΓòÉ
To update the VINES device drivers on the LAN Distance Remote, use the
VINES command NEWREV instead of the VCLIENT command.
Install local copies of all your frequently used VINES utilities and
place these files in your VINES (or appropriate) subdirectory. The
following are some files recommended for copying:
- LOGIN.EXE
- LOGIN.MSB
- LOGOUT.EXE
- LOGOUT.MSB
- INTLDATA.BIN
Load Banyan VINES with the "slr.nl" switch and execute login locally, for
example:
BAN /nl
LOGIN
The following Banyan fix is in the Banyan Maintenance release 5.54(5). If this
release is not available, then contact your Banyan SE.
You must modify the Banyan VINES protocol drivers for Banyan VINES and
LAN Distance to work together correctly:
Adjustable metrics were added for the NDIS protocol. This required
modification to the server and client side drivers. The server side is
adjusted dynamically; therefore, no configuration is required. On the
client side an additional parameter was added for the NDIS configuration:
METRIC=xx
- where xx is the configured metric for the client interface
If the metric parameter is not used, NDIS will default to 2 for Ethernet
and 16meg token ring, 4 for 4 meg token ring. This metric is a timeout
value for determining when to retransmit a frame.
The following summarizes metric parameters values:
Serial Port Speeds Metric values
9600, 19,200 90
38,400 80
57,600 and higher 45
This parameter goes in the PROTOCOL.INI [VINES_XIF] section:
[VINES_XIF]
DRIVERNAME=NDISBAN$
BINDINGS="SOCKDD_MOD"
LANABASE=0
METRIC=90
ΓòÉΓòÉΓòÉ 13. Setting Up the Phone Book ΓòÉΓòÉΓòÉ
The phone book is the directory of information the LAN Distance product needs
to dial workstations. Create a phone book entry for every workstation you
dial, including workstations you connect to over a leased line. A phone book
entry is required to dial any remote location, even over a nonswitched line.
Configure your LAN Distance ports and modems before setting up your phone book;
some phone book entry fields require port information. See Setting Up Ports and
Modems for information about LAN Distance ports.
This chapter describes how to:
Set up phone book entries for asynchronous and synchronous connections
using a switched line.
Set up phone book entries for asynchronous and synchronous connections
using a leased line.
Set up phone book entries for ISDN switched connections.
Configure a phone book entry to automatically start your LAN applications
or command files.
ΓòÉΓòÉΓòÉ 13.1. Creating Phone Book Entries ΓòÉΓòÉΓòÉ
To begin configuring a phone book entry, open the Settings notebook and select
the Phone Book tab.
The Phone Book tab is shown in Settings Notebook, Phone Book Tab.
Settings Notebook, Phone Book Tab
Select a push button to perform an action for a phone book entry. Your changes
are saved when you close the Phone Book - Settings notebook.
Entry Type Window - Settings describes the Entry Type Window - Settings that is
displayed when you add a phone book entry.
Use Asynchronous or Synchronous Switched Line Phone Book Entry, Asynchronous or
Synchronous Leased Line Phone Book Entry, and ISDN Switched Line Phone Book
Entry in Asynchronous and Synchronous (PSTN) Switched Line Connections as
guides to setting up phone book entries for specific connection and line types.
The Copy push button sets up a new phone book entry using information from an
existing phone book entry. After naming your new phone book entry, close the
Phone Book - Settings notebook to save it. Then, select the Change push button
to customize your new phone book entry.
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Table 19. Entry Type Window - Settings Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé FIELD Γöé ACTIONS & INFORMATION Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé NETWORK TYPE Γöé Select the connection type for the phone book entry : Γöé
Γöé Γöé Γöé
Γöé Γöé PSTN - Public Systems Telephone Network (asynchronous or Γöé
Γöé Γöé synchronous) Γöé
Γöé Γöé Γöé
Γöé Γöé ISDN - Integrated Services Digital Network Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé LINE TYPE Γöé Select the line type for the phone book entry: Γöé
Γöé Γöé Γöé
Γöé Γöé Switched Γöé
Γöé Γöé Γöé
Γöé Γöé Nonswitched (leased or permanent connection) Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓòÉΓòÉΓòÉ 13.1.1. Asynchronous and Synchronous (PSTN) Switched Line Connections ΓòÉΓòÉΓòÉ
Use Asynchronous or Synchronous Switched Line Phone Book Entry for setting up a
phone book entry for an asynchronous or synchronous switched line connection.
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Table 20. Asynchronous or Synchronous Switched Line Phone Book Entry Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé TAB Γöé ENTRY FIELDS Γöé ACTIONS & INFORMATION Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé ENTRY Γöé ENTRY NAME Γöé Specify a name for the phone book entry. Γöé
Γöé Γöé Γöé Γöé
Γöé Γöé Γöé The name of the phone book entry must be Γöé
Γöé Γöé Γöé unique within the phone book. Γöé
Γöé Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Γöé DESCRIPTION Γöé Describe the phone book entry. Γöé
Γöé Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Γöé CALLBACK ENTRY Γöé Select whether the phone book entry can be Γöé
Γöé Γöé Γöé used for callback. Γöé
Γöé Γöé Γöé Γöé
Γöé Γöé Γöé Only phone book entries that are marked as Γöé
Γöé Γöé Γöé callback entries can be selected from the list Γöé
Γöé Γöé Γöé box in the callback options for a user Γöé
Γöé Γöé Γöé account. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé NUMBERS Γöé TELEPHONE Γöé View the telephone numbers for the phone book Γöé
Γöé Γöé NUMBER Γöé entry. Γöé
Γöé Γöé Γöé Γöé
Γöé Γöé Γöé Each phone book entry contains a call list of Γöé
Γöé Γöé Γöé one or more telephone numbers. When you dial Γöé
Γöé Γöé Γöé the phone book entry, the numbers in the call Γöé
Γöé Γöé Γöé list are dialed in the order specified, until Γöé
Γöé Γöé Γöé a successful connection is established or the Γöé
Γöé Γöé Γöé dial retry limit is reached. (See Customizing Γöé
Γöé Γöé Γöé Your Dialing Setup for information about dial Γöé
Γöé Γöé Γöé retry). Γöé
Γöé Γöé Γöé Γöé
Γöé Γöé Γöé Being able to configure multiple telephone Γöé
Γöé Γöé Γöé numbers allows you to dial alternative numbers Γöé
Γöé Γöé Γöé when the primary telephone number is busy or Γöé
Γöé Γöé Γöé not answering. Γöé
Γöé Γöé Γöé Γöé
Γöé Γöé Γöé Select a push button to add, change, or delete Γöé
Γöé Γöé Γöé telephone numbers in your call list. A window Γöé
Γöé Γöé Γöé containing these fields is displayed when you Γöé
Γöé Γöé Γöé add or change a telephone number: Γöé
Γöé Γöé Γöé Γöé
Γöé Γöé Γöé o TELEPHONE NUMBER TO BE DIALED Γöé
Γöé Γöé Γöé o DIALING ORDER Γöé
Γöé Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Γöé TELEPHONE Γöé Specify the telephone number of the work- Γöé
Γöé Γöé NUMBER TO BE Γöé station to be dialed. Γöé
Γöé Γöé DIALED Γöé Γöé
Γöé Γöé Γöé Specify the complete telephone number that is Γöé
Γöé Γöé Γöé required to complete the call. For example, Γöé
Γöé Γöé Γöé include the area code for long distance tele- Γöé
Γöé Γöé Γöé phone numbers. Γöé
Γöé Γöé Γöé Γöé
Γöé Γöé Γöé If you always precede your telephone numbers Γöé
Γöé Γöé Γöé with a particular dialing prefix (such as a Γöé
Γöé Γöé Γöé '9') consider updating your modem dialing Γöé
Γöé Γöé Γöé string. Phone book entries do not need to Γöé
Γöé Γöé Γöé include the dialing prefix because all calls Γöé
Γöé Γöé Γöé dialed through the modem will automatically Γöé
Γöé Γöé Γöé have the dialing prefix added to them. See Γöé
Γöé Γöé Γöé Modifying a Dial String for Outside Calls for Γöé
Γöé Γöé Γöé information about modem dialing strings. Γöé
Γöé Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Γöé DIALING ORDER Γöé Select the telephone number position in the Γöé
Γöé Γöé Γöé dialing order list. Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Table 20. Asynchronous or Synchronous Switched Line Phone Book Entry Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé TAB Γöé ENTRY FIELDS Γöé ACTIONS & INFORMATION Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé MODEM Γöé ASYNCHRONOUS Γöé For an asynchronous connection, select the Γöé
Γöé Γöé Γöé modem class that best matches that of the Γöé
Γöé Γöé MODEM CLASS Γöé dialed workstation modem. Γöé
Γöé Γöé Γöé Γöé
Γöé Γöé Γöé When you dial the phone book entry, an avail- Γöé
Γöé Γöé Γöé able modem is selected whose class is closest Γöé
Γöé Γöé Γöé to the selected modem class. If a close match Γöé
Γöé Γöé Γöé is not found or the best modem is not avail- Γöé
Γöé Γöé Γöé able, another modem is used. The call does Γöé
Γöé Γöé Γöé not fail because the desired modem is not Γöé
Γöé Γöé Γöé available. Γöé
Γöé Γöé Γöé Γöé
Γöé Γöé Γöé Modem class represents the fastest modulation Γöé
Γöé Γöé Γöé standard supported by an asynchronous modem. Γöé
Γöé Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Γöé SYNCHRONOUS Γöé For a synchronous connection, select the Γöé
Γöé Γöé Γöé dialed workstation's modem encoding scheme. Γöé
Γöé Γöé ENCODING Γöé Γöé
Γöé Γöé SCHEME Γöé Two encoding schemes are supported: NRZ and Γöé
Γöé Γöé Γöé NRZI. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé PORT Γöé PORT BY TELE- Γöé Select a port to use when dialing the phone Γöé
Γöé Γöé PHONE NUMBER Γöé book entry. Γöé
Γöé (Optional) Γöé Γöé Γöé
Γöé Γöé Γöé If you do not select a port, an available port Γöé
Γöé Γöé Γöé is selected for you when you dial the phone Γöé
Γöé Γöé Γöé book entry. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé AUTOSTART Γöé AUTOSTART Γöé Start a LAN application automatically after a Γöé
Γöé Γöé PROGRAM WHEN Γöé connection is successfully established using Γöé
Γöé (Optional) Γöé CONNECTION Γöé the phone book entry. Γöé
Γöé Γöé ESTABLISHED Γöé Γöé
Γöé Γöé Γöé Use Phone Book Entry, Autostart Tab for Γöé
Γöé Γöé Γöé setting up the Autostart feature. for setting Γöé
Γöé Γöé Γöé up the Autostart feature. Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓòÉΓòÉΓòÉ 13.1.2. Asynchronous and Synchronous (PSTN) Leased Line Connections ΓòÉΓòÉΓòÉ
Use Asynchronous or Synchronous Leased Line Phone Book Entry for setting up a
phone book entry for an asynchronous or synchronous leased line connection.
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Table 21. Asynchronous or Synchronous Leased Line Phone Book Entry Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé TAB Γöé ENTRY FIELDS Γöé ACTIONS & INFORMATION Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé ENTRY Γöé ENTRY NAME Γöé Specify a name for the phone book entry. Γöé
Γöé Γöé Γöé Γöé
Γöé Γöé Γöé The name of the phone book entry must be Γöé
Γöé Γöé Γöé unique within the phone book. Γöé
Γöé Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Γöé DESCRIPTION Γöé Describe the phone book entry. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé CONNECT Γöé MODEM Γöé Select the modem type associated with the Γöé
Γöé Γöé Γöé leased line for the phone book entry. Γöé
Γöé Γöé Γöé Γöé
Γöé Γöé Γöé The modem types that are assigned leased lines Γöé
Γöé Γöé Γöé are displayed in the list box. Γöé
Γöé Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Γöé LEASED LINE Γöé Select the leased line to be used when dialing Γöé
Γöé Γöé NAME Γöé the phone book entry. Γöé
Γöé Γöé Γöé Γöé
Γöé Γöé Γöé Your leased line names are displayed after you Γöé
Γöé Γöé Γöé select your modem. Γöé
Γöé Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Γöé ENCODING Γöé For a synchronous connection, select the Γöé
Γöé Γöé SCHEME Γöé dialed workstation modem encoding scheme. Γöé
Γöé Γöé Γöé Γöé
Γöé Γöé Γöé Two encoding schemes are supported: NRZ and Γöé
Γöé Γöé Γöé NRZI. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé AUTOSTART Γöé AUTOSTART Γöé Start a LAN application automatically after a Γöé
Γöé Γöé PROGRAM WHEN Γöé connection is successfully established using Γöé
Γöé (Optional) Γöé CONNECTION Γöé the phone book entry. Γöé
Γöé Γöé ESTABLISHED Γöé Γöé
Γöé Γöé Γöé Use Phone Book Entry, Autostart Tab for Γöé
Γöé Γöé Γöé setting up the Autostart feature. for setting Γöé
Γöé Γöé Γöé up the Autostart feature. Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓòÉΓòÉΓòÉ 13.1.3. ISDN Switched Line Connections ΓòÉΓòÉΓòÉ
Use ISDN Switched Line Phone Book Entry for setting up a phone book entry for
an ISDN switched line connection.
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Table 22. ISDN Switched Line Phone Book Entry Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé TAB Γöé ENTRY FIELDS Γöé ACTIONS & INFORMATION Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé ENTRY Γöé ENTRY NAME Γöé Specify a name for the phone book entry. Γöé
Γöé Γöé Γöé Γöé
Γöé Γöé Γöé The name of the phone book entry must be Γöé
Γöé Γöé Γöé unique within the phone book. Γöé
Γöé Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Γöé DESCRIPTION Γöé Describe the phone book entry. Γöé
Γöé Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Γöé CALLBACK ENTRY Γöé Select whether the phone book entry can be Γöé
Γöé Γöé Γöé used for callback. Γöé
Γöé Γöé Γöé Γöé
Γöé Γöé Γöé Only phone book entries that are marked as Γöé
Γöé Γöé Γöé callback entries can be selected from the list Γöé
Γöé Γöé Γöé box in the callback options for a user Γöé
Γöé Γöé Γöé account. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé NUMBERS Γöé TELEPHONE Γöé View the telephone numbers for the phone book Γöé
Γöé Γöé NUMBER Γöé entry. Γöé
Γöé Γöé Γöé Γöé
Γöé Γöé Γöé Each phone book entry contains a call list of Γöé
Γöé Γöé Γöé one or more telephone numbers. When you dial Γöé
Γöé Γöé Γöé the phone book entry, the numbers in the call Γöé
Γöé Γöé Γöé list are dialed in the order specified, until Γöé
Γöé Γöé Γöé a successful connection is established or the Γöé
Γöé Γöé Γöé dial retry limit is reached. (See Customizing Γöé
Γöé Γöé Γöé Your Dialing Setup for information about dial Γöé
Γöé Γöé Γöé retry). Γöé
Γöé Γöé Γöé Γöé
Γöé Γöé Γöé Being able to configure multiple telephone Γöé
Γöé Γöé Γöé numbers enables you to dial alternative Γöé
Γöé Γöé Γöé numbers when the primary telephone number is Γöé
Γöé Γöé Γöé busy or not answering. Γöé
Γöé Γöé Γöé Γöé
Γöé Γöé Γöé Select a push button to add, change, or delete Γöé
Γöé Γöé Γöé telephone numbers in the phone book entry. A Γöé
Γöé Γöé Γöé window containing the following fields is dis- Γöé
Γöé Γöé Γöé played when you add or change a telephone Γöé
Γöé Γöé Γöé number. Γöé
Γöé Γöé Γöé Γöé
Γöé Γöé Γöé o TELEPHONE NUMBER TO BE DIALED Γöé
Γöé Γöé Γöé o DIALING ORDER Γöé
Γöé Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Γöé TELEPHONE Γöé Specify the telephone number of the work- Γöé
Γöé Γöé NUMBER TO BE Γöé station to be dialed. Γöé
Γöé Γöé DIALED Γöé Γöé
Γöé Γöé Γöé Specify the complete telephone number that is Γöé
Γöé Γöé Γöé required to complete the call. For example, Γöé
Γöé Γöé Γöé include the area code for long distance tele- Γöé
Γöé Γöé Γöé phone numbers. Γöé
Γöé Γöé Γöé Γöé
Γöé Γöé Γöé If you always precede your telephone numbers Γöé
Γöé Γöé Γöé with a particular dialing prefix (such as a Γöé
Γöé Γöé Γöé '9') consider updating your modem dialing Γöé
Γöé Γöé Γöé string. Phone book entries do not need to Γöé
Γöé Γöé Γöé include the dialing prefix because all calls Γöé
Γöé Γöé Γöé dialed through the modem will automatically Γöé
Γöé Γöé Γöé have the dialing prefix added to them. See Γöé
Γöé Γöé Γöé Modifying a Dial String for Outside Calls for Γöé
Γöé Γöé Γöé information about modem dialing strings. Γöé
Γöé Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Γöé DIALING ORDER Γöé Select the telephone number position in the Γöé
Γöé Γöé Γöé call list. Γöé
Γöé Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Γöé NUMBER TYPE Γöé Select the telephone number type. Γöé
Γöé Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Γöé NUMBERING PLAN Γöé Select the telephone number plan. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé DATA RATE Γöé 64 KBPS Γöé Select the appropriate rate for calls dialed Γöé
Γöé Γöé 56 KBPS Γöé for the phone book entry. Γöé
Γöé Γöé Γöé Γöé
Γöé Γöé Γöé If you are not sure of the appropriate data Γöé
Γöé Γöé Γöé rate, select 64 KBPS. Change it to 56 KBPS if Γöé
Γöé Γöé Γöé you cannot dial this phone book entry success- Γöé
Γöé Γöé Γöé fully. Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Table 22. ISDN Switched Line Phone Book Entry Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé TAB Γöé ENTRY FIELDS Γöé ACTIONS & INFORMATION Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé CALLER ID Γöé DO NOT SEND Γöé Select whether you want your telephone number Γöé
Γöé Γöé TELEPHONE Γöé sent to the dialed workstation. Γöé
Γöé (Optional) Γöé NUMBER Γöé Γöé
Γöé Γöé SEND TELEPHONE Γöé Your local telephone number is your caller ID. Γöé
Γöé Γöé NUMBER Γöé If you choose to send your caller ID, the Γöé
Γöé Γöé Γöé local telephone number specified through the Γöé
Γöé Γöé Γöé CHANNEL tab is sent to the dialed workstation. Γöé
Γöé Γöé Γöé If no telephone number is configured there, Γöé
Γöé Γöé Γöé the LAN Distance product chooses one of your Γöé
Γöé Γöé Γöé local telephone numbers for dialing the call Γöé
Γöé Γöé Γöé and sends that number. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé CHANNEL Γöé ANY TELEPHONE Γöé Use any local telephone number to dial the Γöé
Γöé Γöé NUMBER Γöé phone book entry. Γöé
Γöé (Optional) Γöé Γöé Γöé
Γöé Γöé Γöé The LAN Distance product selects any available Γöé
Γöé Γöé Γöé local telephone number (port) for you when you Γöé
Γöé Γöé Γöé dial the phone book entry. Γöé
Γöé Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Γöé SPECIFIC LOCAL Γöé Select the telephone number of a local channel Γöé
Γöé Γöé TELEPHONE Γöé to be used when dialing the phone book entry. Γöé
Γöé Γöé NUMBER Γöé Γöé
Γöé Γöé Γöé Γöé
Γöé Γöé LOCAL TELE- Γöé Γöé
Γöé Γöé PHONE NUMBER Γöé Γöé
Γöé Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Γöé ANY CHANNEL Γöé Use any available channel when dialing the Γöé
Γöé Γöé Γöé phone book entry. Γöé
Γöé Γöé Γöé Γöé
Γöé Γöé Γöé Any available channel whose telephone number Γöé
Γöé Γöé Γöé matches the LOCAL TELEPHONE NUMBER is used Γöé
Γöé Γöé Γöé when you dial the phone book entry. Γöé
Γöé Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Γöé SPECIFIC Γöé Specify a channel to use when dialing the Γöé
Γöé Γöé CHANNEL Γöé phone book entry. Γöé
Γöé Γöé Γöé Γöé
Γöé Γöé CHANNEL NUMBER Γöé If you specify a LOCAL TELEPHONE NUMBER, then Γöé
Γöé Γöé Γöé CHANNEL NUMBER must be configured for that Γöé
Γöé Γöé Γöé telephone number. Otherwise, an error occurs Γöé
Γöé Γöé Γöé when you dial the phone book entry. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé AUTOSTART Γöé AUTOSTART Γöé Start a LAN application automatically after a Γöé
Γöé Γöé PROGRAM WHEN Γöé connection is successfully established using Γöé
Γöé (Optional) Γöé CONNECTION Γöé the phone book entry. Γöé
Γöé Γöé ESTABLISHED Γöé Γöé
Γöé Γöé Γöé Use Phone Book Entry, Autostart Tab for Γöé
Γöé Γöé Γöé setting up the Autostart feature. for setting Γöé
Γöé Γöé Γöé up the Autostart feature. Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓòÉΓòÉΓòÉ 13.2. Automatically Starting a LAN Application ΓòÉΓòÉΓòÉ
Configure your phone book entry to automatically start a LAN application or
command file on your workstation after you establish a LAN Distance connection.
The tasks in this section apply to both LAN applications and command files.
To configure autostart settings for an existing phone book entry:
1. Open the Settings notebook and select the Phone Book tab.
2. Select a phone book entry.
3. Select the Change push button.
4. Select the Autostart tab.
Use Phone Book Entry, Autostart Tab as a guide for configuring your autostart
settings.
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Table 23. Phone Book Entry, Autostart Tab Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé ENTRY FIELDS Γöé ACTIONS & INFORMATION Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé AUTOSTART Γöé Start a LAN application automatically after a connection is Γöé
Γöé PROGRAM WHEN Γöé established using the phone book entry. Γöé
Γöé CONNECTION Γöé Γöé
Γöé ESTABLISHED Γöé The LAN application is automatically started on the dialing Γöé
Γöé Γöé workstation. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé PROGRAM TITLE Γöé Specify the program name for the OS/2 Window List. Γöé
Γöé Γöé Γöé
Γöé Γöé This name is added to the OS/2 Window List after the LAN Γöé
Γöé Γöé Distance product starts your LAN application. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé PATH AND FILE Γöé Specify the fully-qualified name of your LAN application. Γöé
Γöé NAME Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé PARAMETERS Γöé Specify the input parameters to your LAN application. Γöé
Γöé (Optional) Γöé Γöé
Γöé Γöé If your LAN application enables input parameters, specify Γöé
Γöé Γöé their values here. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé PROGRAM TYPE Γöé Specify your LAN application program type. Γöé
Γöé Γöé Γöé
Γöé Γöé Choose a program type: Γöé
Γöé Γöé Γöé
Γöé Γöé o Default Γöé
Γöé Γöé o CMD Γöé
Γöé Γöé o Full-screen Γöé
Γöé Γöé o PM Γöé
Γöé Γöé o Windowed Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé INITIAL Γöé Specify the window size for your LAN application. Γöé
Γöé WINDOW SIZE Γöé Γöé
Γöé Γöé Choose a window size: Γöé
Γöé Γöé Γöé
Γöé Γöé o Normal Γöé
Γöé Γöé o Maximized Γöé
Γöé Γöé o Minimized Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé START IN Γöé Select whether your LAN application is to be started in the Γöé
Γöé Γöé foreground or background. Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓòÉΓòÉΓòÉ 13.3. Customizing a Phone Book Entry for Calling Card Use ΓòÉΓòÉΓòÉ
Warning: Every time you dial out from your LAN Distance Remote workstation
using a calling card, calling card information for that phone book entry is
recorded in a LAN Distance file, and can be viewed by anyone who has access to
your machine.
You have the option of including calling card information when you define a
telephone number for a LAN Distance Remote or LAN Distance Connection Server.
This allows you to charge the cost for a long distance connection to your
calling card.
You can temporarily customize telephone numbers from the Phone Book, or you can
add or change telephone numbers through the Settings notebook by making the
appropriate selections from the Phone Book tab. See Creating Phone Book
Entries.
ΓòÉΓòÉΓòÉ 13.3.1. Example: Adding Calling Card Information to a Telephone Number ΓòÉΓòÉΓòÉ
Adding Calling Card Information to a Phone Book Entry shows a telephone number
that is set up to use a calling card number. In this example, the telephone
number (4445551234) is preceded by a number that identifies the long distance
carrier (102880) and a 0. After the telephone number is dialed, the modem
pauses (,,) to wait for a gong tone before dialing the calling card number.
The comma (,) dial modifier is used to instruct the modem to pause for 2
seconds. Use several commas for a longer delay.
The comma is a dial modifier that is common to most modems. Any dial modifier
defined for your modem can be entered in the Telephone number to be dialed
field. For more information about dial modifiers, see your modem manual.
Adding Calling Card Information to a Phone Book Entry
ΓòÉΓòÉΓòÉ 13.3.2. Maximum Number of Characters for a Telephone Number ΓòÉΓòÉΓòÉ
A LAN Distance telephone number field can contain a maximum of 50 characters.
Your modem buffer may hold more or less than the maximum number of 50
characters. The dial prefix (ATDT) and suffix (\CR) transmitted with the
telephone number reduces the buffer space for your modem by 5 characters.
If the information for your calling card and telephone number exceeds the
maximum number of 50 characters, you can customize the dial string in the PIF
file for your modem type. For more information, see Modifying a Dial String
for Outside Calls.
ΓòÉΓòÉΓòÉ 14. Dialing and Running LAN Applications ΓòÉΓòÉΓòÉ
This chapter describes how to establish LAN Distance connections and run LAN
applications over the connections. This chapter applies only to LAN Distance
Remotes and stand-alone LAN Distance Connection Servers. The following
information is described in this chapter:
Establishing a LAN Distance connection
Running your LAN applications over a LAN Distance connection
Hanging up a LAN Distance connection
Customizing your dial setup
ΓòÉΓòÉΓòÉ 14.1. Establishing a LAN Distance Connection ΓòÉΓòÉΓòÉ
The actions you perform to establish a LAN Distance connection are much the
same as those performed when placing a normal telephone call. These actions
include the following:
1. Select a phone book entry and dial it.
2. Wait until the dialed workstation answers your call.
3. Exchange information, such as your user identification, with the dialed
workstation.
4. After your connection is established, run your LAN applications over it.
5. End the call by hanging up.
The concept of dialing and answering applies to connections made over switched
and nonswitched lines (even though a telephone number is not required for
nonswitched lines).
To dial a LAN Distance workstation, first open the phone book using step
Establishing a LAN Distance Connection or Establishing a LAN Distance
Connection. Then complete step Establishing a LAN Distance Connection.
1. Open the LAN Distance Workstations window, and double-click on the
MyWorkstation icon.
2. Open the LAN Distance Workstations window, and select the Phone Book from
the Open as pull-down menu.
3. Select the phone book entry for the LAN Distance workstation that you
want to call.
The Phone Book window is shown in Phone Book Window.
Note: If your country code is not US or Great Britain, tabs will not display
in the Phone Book window.
Phone Book Window
Phone Book Entry Window Push Buttons describes the actions for the push
buttons on the Phone Book window.
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Table 24. Phone Book Entry Window Push Buttons Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé PUSH BUTTONS Γöé ACTIONS & INFORMATION Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé DIAL Γöé Select a phone book entry and push the DIAL push button to Γöé
Γöé Γöé dial the phone book entry. Γöé
Γöé Γöé Γöé
Γöé Γöé Your phone book entry contains a call list of one or more Γöé
Γöé Γöé telephone numbers. When you dial the phone book entry, the Γöé
Γöé Γöé numbers in your call list are dialed in the order specified, Γöé
Γöé Γöé until a successful connection is established or your dial Γöé
Γöé Γöé retry limit is reached (see Customizing Your Dialing Setup). Γöé
Γöé Γöé Γöé
Γöé Γöé Having multiple telephone numbers for one phone book entry Γöé
Γöé Γöé enables you to dial alternative numbers when you get busy Γöé
Γöé Γöé signals. Γöé
Γöé Γöé Γöé
Γöé Γöé Logon is required when you dial a secure LAN Distance work- Γöé
Γöé Γöé station (seeLogging On to a Secure LAN Distance Γöé
Γöé Γöé Workstation). Γöé
Γöé Γöé Γöé
Γöé Γöé A secure LAN Distance workstation might perform callback Γöé
Γöé Γöé when you place a call to it; callback is performed automat- Γöé
Γöé Γöé ically (see Callback). Γöé
Γöé Γöé Γöé
Γöé Γöé The Phone Book Entry window is displayed for the duration of Γöé
Γöé Γöé your call. Minimize the Phone Book Entry window if you do Γöé
Γöé Γöé not want it displayed. Status indicates your call status, Γöé
Γöé Γöé such as when it is in the process of connecting and when the Γöé
Γöé Γöé connection is established. Γöé
Γöé Γöé Γöé
Γöé Γöé Use the Call and Port Management window to view and manage Γöé
Γöé Γöé your calls (see Using System Management Tools). Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé ALTERNATE Γöé Change your call list temporarily. Γöé
Γöé Γöé Γöé
Γöé Γöé Update the call list to: Γöé
Γöé Γöé Γöé
Γöé Γöé o Dial a telephone number not included in the call list. Γöé
Γöé Γöé o Specify a different dialing order. Γöé
Γöé Γöé o Change telephone numbers. For example, you can add a Γöé
Γöé Γöé calling card number to long distance telephone numbers. Γöé
Γöé Γöé Γöé
Γöé Γöé Use the push buttons to add, change, and delete telephone Γöé
Γöé Γöé numbers in your call list. Reset ignores your changes. Γöé
Γöé Γöé Γöé
Γöé Γöé Changes to your call list are temporary; they are not dis- Γöé
Γöé Γöé played the next time you open the phone book. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé HANG UP Γöé Hang up the call. Γöé
Γöé Γöé Γöé
Γöé Γöé Stop your LAN applications before hanging up a call. If Γöé
Γöé Γöé they are still running when the call ends, they might detect Γöé
Γöé Γöé connection errors and fail. Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓòÉΓòÉΓòÉ 14.2. Logging On to a Secure LAN Distance Workstation ΓòÉΓòÉΓòÉ
A user account must be set up for you on every secure LAN Distance workstation
that you dial. When you dial a secure LAN Distance workstation, you are
required to log on to it. When you log on, the LAN Distance product verifies
your user ID and passphrase (if specified) with your user account on the secure
LAN Distance workstation.
If security is enabled on your workstation and the workstation you are dialing,
two logons are required: one for your workstation and one for the dialed
workstation. The second logon is attempted automatically for you when you
dial. If your user ID and passphrase are the same for both workstations, the
automatic logon succeeds. However, if your user IDs and passphrases are
different, you are prompted to log on to the dialed workstation.
You remain logged on to the secure LAN Distance workstation until:
You log off
The LAN Distance product is stopped on the secure LAN Distance
workstation
Your connection to the secure LAN Distance workstation ends
The Logon window displays as shown in Logon Window.
Logon Window
Use Logon as a guide for logging on to a secure LAN Distance workstation.
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Table 25. Logon Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé ENTRY FIELDS Γöé ACTIONS & INFORMATION Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé USER ID Γöé Specify your user ID for the workstation Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé PASSPHRASE Γöé Specify your passphrase. Γöé
Γöé Γöé Γöé
Γöé Γöé The LAN Distance product uses a passphrase, rather than a Γöé
Γöé Γöé password, for user authentication. The passphrase allows Γöé
Γöé Γöé imbedded spaces and mixed case characters so that you can Γöé
Γöé Γöé create flexible and complex combinations. Γöé
Γöé Γöé Γöé
Γöé Γöé A passphrase is required for logon if one is defined in your Γöé
Γöé Γöé user account on the secure LAN Distance workstation. Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓòÉΓòÉΓòÉ 14.3. Callback ΓòÉΓòÉΓòÉ
Your user account at a secure LAN Distance workstation can require that
callback be performed for your calls. The procedure for callback is:
1. You dial and log on to the secure LAN Distance workstation.
2. The secure LAN Distance workstation hangs up.
3. The secure LAN Distance workstation calls you back.
4. Your workstation answers the callback call.
5. You are logged on automatically to the secure LAN Distance workstation
again.
Callback is performed only for calls originating from a LAN Distance Remote.
Callback is performed to either a fixed or variable location. Fixed callback
dials a pre-configured telephone number. Variable callback prompts you for a
telephone number to dial.
If your workstation is not already enabled to answer calls, auto answer is
automatically activated so that you can receive the callback call. If auto
answer cannot be activated, callback fails and your connection might not be
established.
ΓòÉΓòÉΓòÉ 14.4. Starting and Running Your LAN Application ΓòÉΓòÉΓòÉ
When you run your LAN applications over LAN Distance connections, they operate
as if they are being run over a LAN to other LAN workstations.
You have a number of options for starting and running your LAN applications
remotely:
Start your LAN application after you establish a LAN Distance connection.
Set up your phone book entry to automatically start your LAN application.
See Automatically Starting a LAN Application for information about
autostarting your LAN applications.
Create a command file that contains LAN Distance commands for dialing and
application commands for running your LAN application.
See Command Line Interface Reference for information about the LAN
Distance command line interface.
Note: The LAN Distance product performs no code page translation of the data
it transmits over your wide area connections. Make sure your LAN
applications handle any code page differences that might occur between
workstations.
ΓòÉΓòÉΓòÉ 14.5. Ending a Call ΓòÉΓòÉΓòÉ
Your LAN Distance connection remains active until:
You hang up
The workstation you dialed hangs up
A connection problem occurs, such as a line failure
The LAN Distance product is stopped on your workstation or the dialed
workstation
To hang up a call, select Hang Up on the Phone Book window (see Phone Book
Endtry Window Push Buttons in Establishing a LAN Distance Connection). You
can also hang up a call through the Call and Port Management window (see Using
System Management Tools).
A pop-up message displays when your LAN Distance connection hangs up. If you
do not want this notification, see Customizing Your Dialing Setup for
instructions on disabling it.
ΓòÉΓòÉΓòÉ 14.6. Customizing Your Dialing Setup ΓòÉΓòÉΓòÉ
Configure your dial settings to enable and disable call event pop-up messages
and to customize dial retry.
To begin configuring your dial settings, open the Settings notebook and select
the Dial tab. Use Settings Notebook, Dial Tab as a guide to customizing your
dial settings.
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Table 26. Settings Notebook, Dial Tab Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé FIELD Γöé ACTIONS & INFORMATION Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé INCOMING CALL Γöé Select whether a pop-up displays when an incoming call is Γöé
Γöé Γöé received. Γöé
Γöé Γöé Γöé
Γöé Γöé This pop-up applies to only a LAN Distance Remote. It is Γöé
Γöé Γöé part of your autoanswer setup. See Customizing Auto Answer Γöé
Γöé Γöé Messages for a LAN Distance Remote for more information. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé UNEXPECTED Γöé Select whether a pop-up displays when a call that your work- Γöé
Γöé DISCONNECT OF Γöé station has answered hangs up unexpectedly. Γöé
Γöé INCOMING CALL Γöé Γöé
Γöé Γöé This pop-up applies to only a LAN Distance Remote. It is Γöé
Γöé Γöé part of your autoanswer setup. See Customizing Auto Answer Γöé
Γöé Γöé Messages for a LAN Distance Remote for more information. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé UNEXPECTED Γöé Select whether a pop-up displays when a call that you dialed Γöé
Γöé DISCONNECT OF Γöé hangs up unexpectedly. Γöé
Γöé OUTGOING CALL Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé RETRY COUNT Γöé Specify the number of times your call list is retried. Γöé
Γöé Γöé Γöé
Γöé Γöé Use dial retry to give your calls additional chances to be Γöé
Γöé Γöé answered. until a LAN Distance connection is successfully Γöé
Γöé Γöé established or your dial retry limit is reached. Each tele- Γöé
Γöé Γöé phone number in your call list is dialed once before Γöé
Γöé Γöé starting the next dial retry. Γöé
Γöé Γöé Γöé
Γöé Γöé A value of 1 for RETRY COUNT means that your call list is Γöé
Γöé Γöé dialed twice. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé RETRY Γöé Specify the number of seconds between dial retries. Γöé
Γöé INTERVAL Γöé Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓòÉΓòÉΓòÉ 14.7. Setting Up LAN Distance Connection Servers to Establish a LAN-to-LAN Connection ΓòÉΓòÉΓòÉ
You can establish a LAN-to-LAN connection between a dialing LAN Distance
Connection Server and an answering LAN Distance Connection Server on separate
LANs. After the connection is established, LAN workstations on one LAN can
access LAN workstations on the other LAN. See LAN-to-LAN Environments.
Note: Do not use the LAN Distance product to establish a LAN-to-LAN
connection between two LANs if any type of connection or a bridge already
exists between the two LANs.
To establish a LAN Distance connection between 2 LAN Distance Connection
Servers:
1. Set up the filtering criteria required for your LAN-to-LAN environment,
see the filtering considerations described in Improving Performance
Factors.
2. The WAN segment ring number configured for the LAN Distance bridges on
the 2 LANs you are connecting must match. (The LAN segment ring numbers
must be different.)
3. Start the LAN Distance product on the dialing and answering LAN Distance
Connection Servers.
4. From the dialing LAN Distance Connection Server, create a phone book
entry to call the answering LAN Distance Connection Server. See Creating
Phone Book Entries.
5. From the answering LAN Distance Connection Server, open the Settings
notebook and select the Answer tab.
6. From the Answer mode list box on the Answer tab, select the answer mode
needed to establish a connection with the dialing LAN Distance Connection
Server.
If an answer mode with the required criteria is not defined, create an
answer mode by selecting the Add push button.
With the required answer mode highlighted in the Answer mode list box,
select the Change push button. Select the LAN-to-LAN connection check
box for this answer mode to set up the answering LAN Distance Connection
Server to receive calls from the dialing LAN Distance Connection Server.
Note: Automatic filtering is disabled for ports that have answer modes
configured to accept LAN-to-LAN connections. See Types of Filtering
Supported for the LAN Distance Bridge.
7. Select the Start mode push button to activate this answer mode, or
automatically start this answer mode by selecting Enable answer mode on
startup.
8. From the dialing LAN Distance Connection Server, select the phone book
entry created in step Setting Up LAN Distance Connection Servers to
Establish a LAN-to-LAN Connection to establish a LAN Distance connection
with the answering LAN Distance Connection Server.
ΓòÉΓòÉΓòÉ 14.8. Using the Dial Request Applet for LAN Dial Out ΓòÉΓòÉΓòÉ
The dial request applet provided in the LAN Distance Connection Server product
allows any OS/2 LAN workstation to request that a LAN Distance Connection
Server establish a connection to an answering LAN Distance Connection Server or
LAN Distance Remote. See LAN-to-LAN Environments.
The dial request applet is made of 2 programs: LDMKCALL and LDACCEPT.
To use the dial request applet to make a LAN-to-LAN connection:
Set up the LAN Distance Connection Servers to establish a LAN-to-LAN
connection as described in Setting Up LAN Distance Connection Servers to
Establish a LAN-to-LAN Connection.
Set up LAN workstations to use LDMKCALL that require dial out capability.
Set up a dialing LAN Distance Connection Server to use LDACCEPT to
receive call requests, and set up an answering LAN Distance Connection
Server to answer calls.
Note: The dial request applet uses NetBIOS. If your NetBIOS resources are
not adequate, you can receive the following error message when you
start LDMKCALL or LDACCEPT:
Request resource(s) not available
If you get this message, go to LAPS to increase one or more of these NetBIOS
parameters: names, sessions, and commands (network control blocks).
ΓòÉΓòÉΓòÉ 14.8.1. Setting Up an OS/2 LAN Workstation ΓòÉΓòÉΓòÉ
To set up an OS/2 LAN workstation to dial out using the LDMKCALL program,
complete these steps:
1. Install and configure the NetBIOS LAN protocol on the LAN workstation.
NetBIOS can be configured through LAPS, which is provided with NTS/2 and
MPTS. If you are running the LAN Requester product, NetBIOS is already
configured.
2. Install the LDMKCALL program on your workstation. LDMKCALL is located in
the WAL directory on the LAN Distance Connection Server.
Copy LDMKCALL.EXE from the WAL directory located on your LAN
Distance Connection Server to a diskette by typing the following
from an OS/2 command line.
COPY LDMKCALL.EXE A:
From the LAN workstation, copy LDMKCALL.EXE from diskette to a drive
and directory (path) location of your choice. The path you choose
must be defined in the PATH statement in your CONFIG.SYS file. From
an OS/2 command line, type:
COPY a:LDMKCALL.EXE x:\
ΓòÉΓòÉΓòÉ 14.8.2. Setting Up LAN Distance Connection Servers ΓòÉΓòÉΓòÉ
To set up the dialing LAN Distance Connection Server to use the LDACCEPT
program, and set up the answering LAN Distance Connection Server to answer,
complete the steps in Setting Up LAN Distance Connection Servers to Establish a
LAN-to-LAN Connection.
ΓòÉΓòÉΓòÉ 14.8.3. Dialing Out from an OS/2 LAN Workstation ΓòÉΓòÉΓòÉ
Use the LDMKCALL program to make a call request to a LAN Distance Connection
Server and to hang up a LAN Distance connection.
ΓòÉΓòÉΓòÉ 14.8.3.1. Dialing Out Using LDMKCALL and LDACCEPT ΓòÉΓòÉΓòÉ
To make a call request, complete these steps:
1. Set up the dialing LAN Distance Connection Server to dial and set up the
answering LAN Distance Connection Server to answer. See the steps in
Setting Up an OS/2 LAN Workstation and Setting Up LAN Distance Connection
Servers.
2. If LAN Distance security is enabled on the answering LAN Distance
Connection Server, it must also be enabled on the dialing LAN Distance
Connection Server. See Enabling and Disabling the LAN Distance Bridge.
If security is enabled on both LAN Distance Connection Servers, the user
ID and passphrase used to logon to the dialing LAN Distance Connection
Server must also be defined in the user account database at the answering
LAN Distance Connection Server. See Creating User Accounts.
3. Start the LDACCEPT program on the dialing LAN Distance Connection Server
by typing LDACCEPT at an OS/2 command prompt.
The name of the NetBIOS session is displayed when the LDACCEPT program is
started, for example LDLS400012345678. The LAN workstation uses the
NetBIOS session name to send dial or hangup requests to the dialing LAN
Distance Connection Server The dialing LAN Distance Connection Server is
ready to accept call requests from LAN workstations.
4. From the LAN workstation, go to an OS/2 command prompt, and type:
LDMKCALL /D:directoryname /S:netbiosname /N:phonenumber /A:adapter
/D:directoryname
This parameter is required. It is the name of the phone book
entry at the dialing LAN Distance Connection Server that is used
to establish the connection.
/S:netbiosname
This parameter is required. It is the applet's NetBIOS name that
receives the call request. This NetBIOS name is displayed at the
dialing LAN Distance Connection Server when the LDACCEPT applet
is started.
/N:phonenumber
This parameter is optional. If a phone number is not supplied,
the phone number in the phone book entry is used. If a phone
number is provided, it overrides the phone number in the phone
book entry.
/A:adapter
This parameter is optional. Specify the NetBIOS adapter number
(0-15) to be used by the dial request applet. The NetBIOS
adapter number defaults to 0.
5. The LDMKCALL program sends a dial or hang up request to the LAN Distance
Connection Server that issues the LDIST DIAL or LDIST HANGUP command.
The results of these commands are displayed following the LDMKCALL
command. Refer to the Command Line Interface Reference for a description
of the LDIST command.
ΓòÉΓòÉΓòÉ 14.8.3.2. Ending a Connection Using LDMKCALL ΓòÉΓòÉΓòÉ
You can end a connection started using the LDMKCALL program from any LAN
Distance Connection Server or LAN workstation that has the LDMKCALL program
installed. To end a connection, complete these steps:
1. From the LAN workstation, go to an OS/2 command prompt, and type:
LDMKCALL HANGUP /D:directoryname /S:netbiosname /A:adapter
/D:directoryname
This parameter is required. It is the name of the phone book
entry at the dialing LAN Distance Connection Server that is used
to establish the connection.
/S:netbiosname
This parameter is required. It is the name of the LAN Distance
Connection Server dial request applet used to establish the
connection, for example LDLS400012345678.
/A:adapter
This parameter is optional. Specify the NetBIOS adapter number
(0-15) to be used by the dial request applet. The NetBIOS
adapter number defaults to 0.
ΓòÉΓòÉΓòÉ 15. Answering Incoming Calls ΓòÉΓòÉΓòÉ
Choose whether or not your workstation accepts incoming calls and, optionally,
configure which LAN Distance ports are used to answer those calls.
Your ports must be set up before your workstation can answer calls. See Setting
Up Ports and Modems for information about LAN Distance ports.
This chapter describes how to:
Enable and disable the autoanswer feature
Customize your answer criteria
Automatically start your LAN applications after a LAN Distance connection
is established
Receive notification of incoming calls (LAN Distance Remote only)
ΓòÉΓòÉΓòÉ 15.1. Auto Answer and Answer Modes ΓòÉΓòÉΓòÉ
Autoanswer allows your workstation to answer incoming calls automatically.
Calls are accepted or rejected without any active intervention by you.
An answer mode is an answering state for a workstation and it is based on a set
of answer criteria that determine which incoming calls are accepted. For
example, your workstation can be configured to accept calls over only a
specific leased line. Include the name of the leased line in the answer
criteria for an answer mode and activate the answer mode to answer calls over
only that leased line.
Two answer modes are installed on your workstation:
PSTN_ALL_CALLS
ISDN_ALL_CALLS
When they are activated, your workstation can accept all incoming calls for a
connection type.
Two additional answer modes, used only for callback, are installed on a LAN
Distance Remote:
CALLBACK_PSTN
CALLBACK_ISDN
These answer modes are used by the phone book to place the LAN Distance Remote
in autoanswer mode if a LAN Distance Connection Server is configured to call
the LAN Distance Remote back.
To activate or deactivate autoanswer on your workstation:
1. Open the Settings notebook and select the Answer tab.
2. Select an Answer mode.
3. Select one of the radio buttons, as appropriate:
Start mode
Stop mode
4. Repeat these steps for every answer mode you want to activate or
deactivate.
Note: These steps activate autoanswer one time only. To activate the answer
mode the next time you run the LAN Distance product, you must perform
the same steps again.
The Answer page of the Settings notebook displays as shown in Settings
Notebook, Answer Tab.
Settings Notebook, Answer Tab
To automatically activate an answer mode every time you run the LAN Distance
product:
1. Open the Answer tab of the Settings notebook.
2. Select answer mode you want to automatically activate.
3. Select the Change push button.
4. Check Enable answer mode on startup.
5. Repeat these steps for every answer mode you want to activate
automatically.
ΓòÉΓòÉΓòÉ 15.2. Customizing Your Answer Modes ΓòÉΓòÉΓòÉ
The answer criteria for an answer mode determines which calls your workstation
answers. To begin customizing an answer mode open the Settings notebook and
select the Answer tab.
Select a push button to perform an action for an answer mode. Your changes are
saved when you close the Answer page of the Settings notebook.
Entry Type Window - Settings describes the Entry Type Window - Settings that is
displayed when you add an answer mode.
Use Asynchronous or Synchronous (PSTN) Switched Line Connections, Asynchronous
or Synchronous Leased Line Answer Modes, and ISDN Switched Line Answer Mode as
guides to set up answer modes for specific connection and line types. Set up
at least one answer mode for every WAN connection type over which your
workstation accepts calls. Also, a separate answer mode is required for each
leased line on your workstation.
The Copy push button sets up a new answer mode using information from an
existing answer mode. Name your new answer mode, close the Answer page of the
Settings notebook to save it, and then select the Change push button to
customize your new answer mode.
If you delete an active answer mode, it remains active until you disable it or
you stop the LAN Distance product.
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Table 27. Entry Type Window - Settings Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé FIELD Γöé ACTIONS & INFORMATION Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé NETWORK TYPE Γöé Select the connection type for the answer mode: Γöé
Γöé Γöé Γöé
Γöé Γöé PSTN - Public Systems Telephone Network (asynchronous or Γöé
Γöé Γöé synchronous) Γöé
Γöé Γöé Γöé
Γöé Γöé ISDN - Integrated Services Digital Network Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé LINE TYPE Γöé Select the line type for the answer mode: Γöé
Γöé Γöé Γöé
Γöé Γöé Switched Γöé
Γöé Γöé Γöé
Γöé Γöé Nonswitched (leased or permanent connection) Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓòÉΓòÉΓòÉ 15.2.1. Asynchronous and Synchronous (PSTN) Switched Line Connections ΓòÉΓòÉΓòÉ
Use Asynchronous or Synchronous Switched Line Answer Modes as a guide for
setting up an answer mode for an asynchronous or synchronous switched line
connection.
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Table 28. Asynchronous or Synchronous Switched Line Answer Modes Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé TAB Γöé ENTRY FIELDS Γöé ACTIONS & INFORMATION Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé ANSWER Γöé ANSWER MODE Γöé Specify a name for the answer mode. Γöé
Γöé Γöé NAME Γöé Γöé
Γöé Γöé Γöé The name of your answer mode must be unique on Γöé
Γöé Γöé Γöé your workstation. Γöé
Γöé Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Γöé DESCRIPTION Γöé Describe the answer mode. Γöé
Γöé Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Γöé ENABLE ANSWER Γöé Select whether you want to automatically acti- Γöé
Γöé Γöé MODE ON Γöé vate the answer mode every time you start the Γöé
Γöé Γöé STARTUP Γöé LAN Distance product. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé PORT Γöé ALL PORTS Γöé Select whether you will accept calls on all or Γöé
Γöé Γöé SPECIFIC PORTS Γöé specific ports. Γöé
Γöé (Optional) Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Γöé PORT LIST Γöé Select which ports are allowed to answer Γöé
Γöé Γöé Γöé calls. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé AUTOSTART Γöé AUTOSTART Γöé Start a LAN application automatically after a Γöé
Γöé Γöé PROGRAM WHEN Γöé connection is successfully established using Γöé
Γöé (Optional) Γöé CONNECTION Γöé this answer mode. Γöé
Γöé Γöé ESTABLISHED Γöé Γöé
Γöé Γöé Γöé Use Autostart Tab, Answer Mode as a guide for Γöé
Γöé Γöé Γöé setting up the Autostart as a guide for Γöé
Γöé Γöé Γöé setting up the Autostart feature. Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓòÉΓòÉΓòÉ 15.2.2. Asynchronous and Synchronous (PSTN) Leased Line Connections ΓòÉΓòÉΓòÉ
Use Asynchronous or Synchronous Leased Line Answer Modes as a guide for setting
up an answer mode for an asynchronous or synchronous leased line connection.
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Table 29. Asynchronous or Synchronous Leased Line Answer Modes Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé TAB Γöé ENTRY FIELDS Γöé ACTIONS & INFORMATION Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé ANSWER Γöé ANSWER MODE Γöé Specify a name for the answer mode. Γöé
Γöé Γöé NAME Γöé Γöé
Γöé Γöé Γöé The name of your answer mode must be unique on Γöé
Γöé Γöé Γöé your workstation. Γöé
Γöé Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Γöé DESCRIPTION Γöé Describe the answer mode. Γöé
Γöé Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Γöé ENABLE ANSWER Γöé Select whether you want to automatically acti- Γöé
Γöé Γöé MODE ON Γöé vate the answer mode every time you start the Γöé
Γöé Γöé STARTUP Γöé LAN Distance product. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé CONNECT Γöé MODEM Γöé Select the modem type for the leased line for Γöé
Γöé Γöé Γöé the answer mode. Γöé
Γöé Γöé Γöé Γöé
Γöé Γöé Γöé The modem types that are assigned leased lines Γöé
Γöé Γöé Γöé are displayed in the list box. Γöé
Γöé Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Γöé LEASED LINE Γöé Specify the name of the leased line that can Γöé
Γöé Γöé NAME Γöé accept incoming calls. Γöé
Γöé Γöé Γöé Γöé
Γöé Γöé Γöé Your leased line names are displayed after you Γöé
Γöé Γöé Γöé select your modem. Γöé
Γöé Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Γöé ENCODING Γöé For a synchronous connection, select the Γöé
Γöé Γöé SCHEME Γöé dialing workstation's modem encoding scheme. Γöé
Γöé Γöé Γöé Γöé
Γöé Γöé Γöé Two encoding schemes are supported: NRZ and Γöé
Γöé Γöé Γöé NRZI. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé AUTOSTART Γöé AUTOSTART Γöé Start a LAN application automatically after a Γöé
Γöé Γöé PROGRAM WHEN Γöé connection is successfully established using Γöé
Γöé (Optional) Γöé CONNECTION Γöé this answer mode. Γöé
Γöé Γöé ESTABLISHED Γöé Γöé
Γöé Γöé Γöé Use Autostart Tab, Answer Mode as a guide for Γöé
Γöé Γöé Γöé setting up the Autostart as a guide for Γöé
Γöé Γöé Γöé setting up the Autostart feature. Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓòÉΓòÉΓòÉ 15.2.3. ISDN Switched Line Connections ΓòÉΓòÉΓòÉ
Use ISDN Switched Line Answer Mode as a guide for setting up an answer mode for
an ISDN switched connection.
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Table 30. ISDN Switched Line Answer Mode Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé TAB Γöé ENTRY FIELDS Γöé ACTIONS & INFORMATION Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé ANSWER Γöé ANSWER MODE Γöé Specify a name for the answer mode. Γöé
Γöé Γöé NAME Γöé Γöé
Γöé Γöé Γöé The name of your answer mode must be unique on Γöé
Γöé Γöé Γöé your workstation. Γöé
Γöé Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Γöé DESCRIPTION Γöé Describe the answer mode. Γöé
Γöé Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Γöé ENABLE ANSWER Γöé Select whether you want to automatically acti- Γöé
Γöé Γöé MODE ON Γöé vate the answer mode every time you start the Γöé
Γöé Γöé STARTUP Γöé LAN Distance product. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé LOCAL Γöé ALL TELEPHONE Γöé Select whether any channel or specific chan- Γöé
Γöé Γöé NUMBERS Γöé nels can answer calls. Γöé
Γöé (Optional) Γöé SPECIFIC TELE- Γöé Γöé
Γöé Γöé PHONE NUMBERS Γöé Γöé
Γöé Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Γöé CURRENT LOCAL Γöé Select the telephone numbers of the channels Γöé
Γöé Γöé TELEPHONE Γöé that can accept calls. Γöé
Γöé Γöé NUMBERS Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé NUMBERS Γöé ACCEPT ALL Γöé Select whether and how to screen calls from Γöé
Γöé Γöé CALLS Γöé specific telephone numbers. Γöé
Γöé Γöé ACCEPT ONLY Γöé Γöé
Γöé Γöé CALLS FROM Γöé Γöé
Γöé Γöé SPECIFIC Γöé Γöé
Γöé Γöé NUMBERS Γöé Γöé
Γöé Γöé REJECT CALLS Γöé Γöé
Γöé Γöé FROM SPECIFIC Γöé Γöé
Γöé Γöé NUMBERS Γöé Γöé
Γöé Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Γöé CURRENT Γöé View the telephone numbers from which you Γöé
Γöé Γöé CALLING NUMBER Γöé accept or reject calls. Γöé
Γöé Γöé FILTERS Γöé Γöé
Γöé Γöé Γöé Select a push button to add, change, or delete Γöé
Γöé Γöé Γöé a telephone number in your filters. A window Γöé
Γöé Γöé Γöé containing these fields is displayed when you Γöé
Γöé Γöé Γöé add or change a telephone number: Γöé
Γöé Γöé Γöé Γöé
Γöé Γöé Γöé o Telephone number Γöé
Γöé Γöé Γöé o Screening indicator Γöé
Γöé Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Γöé TELEPHONE Γöé Specify a telephone number from which you will Γöé
Γöé Γöé NUMBER Γöé accept or reject calls. Γöé
Γöé Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Γöé SCREENING Γöé Select whether the telephone number is sup- Γöé
Γöé Γöé INDICATOR Γöé plied by the network, the dialing workstation, Γöé
Γöé Γöé Γöé or either. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé AUTOSTART Γöé AUTOSTART Γöé Start a LAN application automatically after a Γöé
Γöé Γöé PROGRAM WHEN Γöé connection is successfully established using Γöé
Γöé (Optional) Γöé CONNECTION Γöé this answer mode. Γöé
Γöé Γöé ESTABLISHED Γöé Γöé
Γöé Γöé Γöé Use Autostart Tab, Answer Mode as a guide for Γöé
Γöé Γöé Γöé setting up the autostart as a guide for Γöé
Γöé Γöé Γöé setting up the autostart feature. Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓòÉΓòÉΓòÉ 15.3. Starting Your LAN Application Automatically ΓòÉΓòÉΓòÉ
Configure your answer criteria to automatically start a LAN application or a
command file on your workstation after you answer a call and establish a LAN
Distance connection. The tasks in this section apply to LAN applications and
command files.
To configure autostart settings for an existing answer mode:
1. Open the Settings notebook, and select the Answer tab.
2. Select an answer mode.
3. Select the Change push button.
4. Select the Autostart tab.
Use Autostart Tab, Answer Mode as a guide for configuring your autostart
settings.
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Table 31. Autostart Tab, Answer Mode Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé ENTRY FIELDS Γöé ACTIONS & INFORMATION Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé AUTOSTART Γöé Start a LAN application automatically after a connection is Γöé
Γöé PROGRAM WHEN Γöé established using this answer mode. Γöé
Γöé CONNECTION Γöé Γöé
Γöé ESTABLISHED Γöé The LAN application is automatically started on the Γöé
Γöé Γöé answering workstation. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé PROGRAM TITLE Γöé Specify the program name for the OS/2 Window List. Γöé
Γöé Γöé Γöé
Γöé Γöé This name is added to the OS/2 window list after the LAN Γöé
Γöé Γöé Distance product starts your LAN application. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé PATH AND FILE Γöé Specify the fully-qualified name of your LAN application. Γöé
Γöé NAME Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé PARAMETERS Γöé Specify the input parameters to your LAN application. Γöé
Γöé (Optional) Γöé Γöé
Γöé Γöé If your LAN application allows input parameters, specify Γöé
Γöé Γöé their values here. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé PROGRAM TYPE Γöé Specify your LAN application program type. Γöé
Γöé Γöé Γöé
Γöé Γöé Choose a program type: Γöé
Γöé Γöé Γöé
Γöé Γöé o Default Γöé
Γöé Γöé o CMD Γöé
Γöé Γöé o Full-screen Γöé
Γöé Γöé o PM Γöé
Γöé Γöé o Windowed Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé INITIAL Γöé Specify the window size for your LAN application. Γöé
Γöé WINDOW SIZE Γöé Γöé
Γöé Γöé Choose a window size: Γöé
Γöé Γöé Γöé
Γöé Γöé o Normal Γöé
Γöé Γöé o Maximized Γöé
Γöé Γöé o Minimized Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé START IN Γöé Select whether your LAN application is to be started in the Γöé
Γöé Γöé foreground or background. Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓòÉΓòÉΓòÉ 15.4. Customizing Auto Answer Messages for a LAN Distance Remote ΓòÉΓòÉΓòÉ
Pop-up messages notify you when an incoming call ends unexpectedly, such as
when your connection experiences a line failure. A pop-up message also displays
when a call is received and accepted by your workstation.
The pop-up message is displayed until you acknowledge them.
If you do not want to be notified of these call events, disable the messages.
To specify when you receive pop-up messages:
1. Select Settings and select the Dial tab.
2. Choose whether to display pop-up messages for:
Incoming call
Unexpected disconnect of incoming call
ΓòÉΓòÉΓòÉ 16. Troubleshooting Tips ΓòÉΓòÉΓòÉ
This chapter contains troubleshooting tips for these situations:
Error messages during LAN Distance Remote for MS Windows installation
Restoring a LAN Distance Connection Server if you interrupt installation
Message WCL0233 displays when you start the LAN Distance product
Message WCL0567
Message WCL0589 and WCL0219
Message VL10128 displays when you start the LAN Distance Connection
Server
Virtual LAN kernel message displays
LAN Distance COM port flooded with LAN data
Problems establishing a LAN Distance connection
Problems running IBM LAN Server and Requester
IBM Communication Manager/2 3270 emulation error message displays
Unable to communicate with the Banyan VINES Server.
Avoiding the NetWare connection error on the NetWare Requester
Delay when starting up your LAN application
ΓòÉΓòÉΓòÉ 16.1. Error Messages During LAN Distance Remote for MS Windows Installation ΓòÉΓòÉΓòÉ
If the upper memory on your DOS workstation is not being utilized correctly,
when you install the LAN Distance Remote for MS Windows product, you can
receive error messages similar to these:
Severe error writing to drive C:
Application error
A decompression error has occurred...
If you receive such an error message, verify that the parameter values
specified for the DEVICE=EMM386.SYS (or equivalent) statement in your
CONFIG.SYS are correct, or comment out the EMM386 line in your CONFIG.SYS file.
If you make changes to the CONFIG.SYS file, stop all applications, restart your
workstation, then install the LAN Distance Remote for MS Windows product again.
ΓòÉΓòÉΓòÉ 16.2. Restoring Your Workstation If You Interrupt Installation ΓòÉΓòÉΓòÉ
If you interrupt installation, try using the LDREMOVE program to restore your
workstation. Follow the steps in Removing the LAN Distance Connection Server
Product. If the LDREMOVE (or LDREM) program is successful, your workstation is
restored, and you can install the LAN Distance product after you shut down and
restart your workstation.
If the LDREMOVE program fails, follow these steps before you shut down and
restart your workstation:
1. Remove the following statements from your CONFIG.SYS file:
DEVICE=C:\OS2INSTALL\IBMLANLK.SYSRUN=C:\OS2\INSTALL\IBMLANLK.EXE C:\OS2\INSTALL\WALLOCK.LST
2. Run the LDREMOVE program.
If LDREMOVE is successful, then your workstation is restored and you can
install the LAN Distance product after you shut down and restart your
workstation.
ΓòÉΓòÉΓòÉ 16.3. Avoiding Message WCL0233 When Restarting Your Workstation ΓòÉΓòÉΓòÉ
This message is displayed if 1) you have a workstation with non-FIFO COM ports
and 2) the serial port speed for the COM port is set to 38400 bps or greater.
Because workstations without FIFO buffering generally cannot support
transmission speeds exceeding 9600 bps, the LAN Distance product automatically
resets this value.
To keep this message from displaying each time you start the LAN Distance
product, change the value of the SerialPortSpeed parameter in the WCLNET.INI
file to 9600 bps. (If you prefer, you can change this parameter in the PIF
file for your modem).
1. Stop the LAN Distance product.
2. From an OS/2 command prompt, go to the WCLNET.INI file in the WAL
directory.
3. In the WCLNET.INI file, locate the SerialPortSpeed parameter.
Use an ASCII editor to change the SerialPortSpeed value to 9600 bps.
4. Close the WCLNET.INI file and save your changes.
5. Restart the LAN Distance product.
Note: Some non-FIFO machines with faster processors (25 MHz and above)
and modems (14400 bps or better) can support higher transmission speeds,
see Performance Tuning for Non-FIFO Workstations.
ΓòÉΓòÉΓòÉ 16.4. Message WCL0567 ΓòÉΓòÉΓòÉ
This message indicates that the LAN Distance logical adapter (PDFH) is not
correctly configured for use by Remote Access Services (PPP Server).
Follow the steps below to verify that the LAN Distance logical adapter is
correctly configured.
1. Use MPTS or the LAN Services Installation/Configuration program to view
the protocols that are bound to the LAN Distance logical adapter.
If neither "IBM OS/2 NetBIOS" nor "IBM OS/2 NetBIOS over TCPIP" are bound
to the LAN Distance logical adapter, add one of them to the adapter.
If the LAN Distance logical adapter is correctly configured, note the
number of logical adapters that are configured and the logical adapter
numbers that are assigned to the protocols that are bound to the LAN
Distance logical adapter.
2. Use an editor to view the value that is assigned to the ADAPTER parameter
in the SRDDEFS section in WCLLOCAL.INI.
This value tells Remote Access Services (PPP Server) how many logical
adapters it needs to initialize for use with "IBM OS/2 NetBIOS" or with
"IBM OS/2 NetBIOS over TCPIP". The default value is 2.
If you have assigned a logical adapter value greater than 1 to the "IBM
OS/2 NetBIOS" or "IBM OS/2 NetBIOS over TCPIP" protocols that are bound
to the LAN Distance logical adapter, then you can change the
configuration in one of two ways:
a) Use MPTS or the LAN Services Installation/Configuration program to
reorder the logical number assignments such that the LAN Distance
logical adapter protocols mentioned above have assignments of 0 or
1.
b) Or, use the editor to increase the value for the ADAPTER parameter
in the SRDDEFS section in WCLLOCAL.INI as appropriate.
ΓòÉΓòÉΓòÉ 16.5. Message WCL0589 ΓòÉΓòÉΓòÉ
These messages may indicate that your modem is not configured properly. If you
created a new PIF file (modem type) for your modem, make sure the AT commands
in its initialization string are set for the configuration requirements
described in Creating a New PIF File for a Modem Not in the List.
ΓòÉΓòÉΓòÉ 16.6. Message VL10128 at OS/2 System Start Up ΓòÉΓòÉΓòÉ
This message is displayed when you reboot your Connection Server and is saved
in the \IBMLAN\LANTRAN.LOG file. It indicates that the MAC frame size
configured for the Token-Ring adapter is smaller than the maximum data unit
size (MAC frame size) configured for the LAN Distance Connection Server
product.
If you are using an IBM Token-Ring 16/4 adapter, complete the steps
listed in Increasing the Shared RAM Size on Token-Ring 16/4 Adapters.
If you are using an IBM Token-Ring /A adapter, complete the steps listed
in Changing Parameters for Token-Ring/A Adapters.
ΓòÉΓòÉΓòÉ 16.6.1. Increasing the Shared RAM Size on Token-Ring 16/4 Adapters ΓòÉΓòÉΓòÉ
To support remote access, the Token-Ring LAN adapter on the LAN Distance
Connection Server should have a shared RAM size of 16 KB. When you installed
the adapter, its shared RAM size is defaulted to a value less than 16 KB.
For micro channel adapters, use the reference diskette for the Token-Ring
adapter to change the shared RAM size to 16 KB.
For non-micro channel adapters, see your adapter documentation for
instructions on setting the shared RAM size for your adapter to 16 KB.
ΓòÉΓòÉΓòÉ 16.6.2. Changing Parameters for Token-Ring/A Adapters ΓòÉΓòÉΓòÉ
Change the following parameters only if you are using a Token-Ring/A adapter on
the LAN Distance Connection Server:
1. Open the Settings notebook and select the Bridge tab.
2. Change the value in the Maximum data unit size field to 1500.
3. Select the LAPS tab, then select the LAPS push button to open the LAPS
Configure Workstation window.
4. From the Current Configuration list box, select your Token-Ring adapter,
then select Edit.
5. Scroll to the Bridge transmit control RAM field, and change the value to
5296. Select the OK push button.
6. To save your configuration changes, exit LAPS, close the Settings
notebook, then shut down and restart your workstation.
ΓòÉΓòÉΓòÉ 16.7. Virtual LAN Kernel Message ΓòÉΓòÉΓòÉ
The following message may be saved in the \IBMLAN\LANTRAN.LOG file when you
restart your workstation after installing the the LAN Distance Connection
Server product. This message does not indicate a problem. It is the result of
the LAN Distance virtual LAN kernel device driver attempting to locate the
FFST/2 device driver.
The IBM Virtual LAN Kernel could not attach
to the FFST/2 device driver EPWDD.SYS
ΓòÉΓòÉΓòÉ 16.8. LAN Distance Remote COM Port Flooded with LAN Data ΓòÉΓòÉΓòÉ
If the LAN Distance Remote COM port is flooded with LAN data, you may notice
some or all of the following problems:
Inability to transfer data or slow data transfer
The receive data light for your LAN Distance Remote modem is constantly
lit
The LAN Distance connection drops unexpectedly
Inability to log on to a LAN Distance Connection Server
If you experience any of these problems, filtering may not be set up at the
LAN Distance bridge or the Token-Ring route designator defined for the LAN
Distance bridge may not be unique.
See Types of Filtering Supported for the LAN Distance Bridge and Defining LAN
Distance Bridge Token-Ring Configuration Values.
ΓòÉΓòÉΓòÉ 16.9. Problems Establishing a LAN Distance Connection ΓòÉΓòÉΓòÉ
You can experience problems establishing or maintaining a LAN Distance
connection. The most common causes of connection problems are related to your
LAN Distance configuration and your communications hardware setup.
This section describes steps to correct connection problems caused by the
following:
Answer mode not started at the LAN Distance Connection Server
Modem fails to initialize
Defective modem cable
Filtering is not enabled at the LAN Distance Connection Server
FIFO transmit size needs adjusting
Secure LAN Distance workstation does not call back
Duplicate LAN adapter address
Non-LAN-Distance destination mis-match
External modem configuration overriding LAN Distance modem settings
COM port speed needs adjusting
ΓòÉΓòÉΓòÉ 16.9.1. Answer Mode Not Started at the LAN Distance Connection Server ΓòÉΓòÉΓòÉ
If an answer mode is not started at the dialed LAN Distance workstation, one of
the error messages is displayed. In this situation, LAN Distance appears to
establish a connection, but then drops the connection.
WCL0318W: The remote modem is not answering.
The call cannot be connected.
WCL0334W: The called workstation rejected the call.
The call cannot be connected.
WCL0336E: The called workstation did not respond to
requests to exchange information with the
LAN Distance product.
WCL0340E: The called workstation is not responding.
The call cannot be connected.
To start an answer mode at a LAN Distance Connection Server, see Auto Answer
and Answer Modes.
ΓòÉΓòÉΓòÉ 16.9.2. Modem Fails to Initialize ΓòÉΓòÉΓòÉ
If you dial out to establish a connection with a LAN Distance workstation and
receive a message similar to one of the following, your modem may not be
properly configured to use the LAN Distance product. Your modem may appear to
establish a connection, but the "Connected" message is never displayed in the
Status field of the phone book.
WCL0221: LAN Distance could not initialize the modem.
WCL0336E: The called workstation did not respond to requests
to exchange information with the LAN Distance
product.
To check your modem configuration, try any of the following recommendations
that apply to your modem setup.
ΓòÉΓòÉΓòÉ 16.9.2.1. Asynchronous Switched Modem ΓòÉΓòÉΓòÉ
If you are setting up the LAN Distance product to use an asynchronous switched
modem, your modem is either listed or not listed in the Available modem types
field.
If your modem is listed, verify that the modem type you selected matches
your modem.
If your modem is not listed, verify that the modem you selected is
"similar" to your modem. See Using a Listed Modem Type to Configure Your
Asynchronous Modem.
Note: You can use the Port/Modem utility to select and test the
connection between a similar modem and a COM port. See Using the
Port/Modem Utility.
ΓòÉΓòÉΓòÉ 16.9.2.2. Synchronous Modem, Null Modem or Leased Line ΓòÉΓòÉΓòÉ
If you are setting up the LAN Distance product to use a synchronous modem, a
null modem, or a leased line, select the appropriate generic modem type from
the Available modem types list box. See Using Synchronous Modems and Leased
Lines.
ΓòÉΓòÉΓòÉ 16.9.2.3. Custom PIF File ΓòÉΓòÉΓòÉ
If you created a custom PIF file using a similar modem as a template and
continue to experience connection problems, check the following configuration
values in the PIF file you created.
Note: You can also use the Port/Modem utility to test the PIF file you
created. See Using the Port/Modem Utility.
DTE Rate
The initialization string for your modem must set the DTE rate to "fixed".
This is the speed at which data is passed between the serial port and the
modem.
AutoBaudDetect
The Default keyword in the AutoBaudDetect section of the PIF file should be
set to "off".
DSR (Data Set Ready) Signal
The initialization string for your modem must set the modem DSR signal to go
from on to off when a connection ends. (For most modems, the correct
command is &S1.) Use your modem manual to verify the correct command for
your modem.
CD (Carrier Detect)
The initialization string for your modem must be set so the modem tracks the
status of the carrier detect signal. (For most modems, this command is
&C1.) Use your modem manual to verify the correct command for your modem.
Some modem manuals refer to the CD as the DCD or RLSD.
Flow Control
The LAN Distance product requires hardware (RTS/CTS) flow control. Verify
that the initialization parameters for your modem use RTS/CTS line signals
for flow control, and do not use XON, XOFF characters for flow control.
ΓòÉΓòÉΓòÉ 16.9.2.4. IBM 7855 Modem ΓòÉΓòÉΓòÉ
External configuration is required to use the IBM7855 modem with the LAN
Distance product. See External Settings for the IBM7855 Modem.
ΓòÉΓòÉΓòÉ 16.9.3. Defective Modem Cable ΓòÉΓòÉΓòÉ
If the following message is displayed when you try to establish a connection to
a LAN Distance Remote or LAN Distance Connection Server, the workstation you
dialed may have a defective modem cable. Some modems are more sensitive to
cable wiring than others.
Test the modem cable on the dialed workstation using another asynchronous
software product. OS/2 version 2.1 users can access the PM Terminal product in
the Productivity folder on the WorkPlace Shell. Or switch the modem cable
attached to the dialed workstation with a cable that you know is functioning.
WCL0336E: The called workstation did not respond to
requests to exchange information with the LAN
Distance product.
ΓòÉΓòÉΓòÉ 16.9.4. Filtering Is Not Enabled at the LAN Distance Connection Server ΓòÉΓòÉΓòÉ
If filtering is disabled at the LAN Distance Connection Server, the LAN
Distance connection can quickly become flooded with LAN data frames. You may
notice the following symptoms:
Inability to transfer data or slow data transfer rate
The receive data light on your modem is constantly lit
The LAN Distance connection drops unexpectedly
Inability to log on to a LAN Distance Connection Server
To enable filtering for the LAN Distance Connection Server, see Customizing
Filtering Criteria.
ΓòÉΓòÉΓòÉ 16.9.5. FIFO Transmit Size Needs Adjusting ΓòÉΓòÉΓòÉ
If your modem does not support the default FIFO transmit size (14) used by the
LAN Distance product, you can experience time-outs, random disconnects, and
slow response times when running LAN applications over a LAN Distance
connection.
Most modems will accept the default value. For some modems, including the
Hayes Optima 9600 and the Hayes Ultra 9600, you may need to lower the LAN
Distance FIFO transmit size to 7 (or the recommended value) if you experience
these problems. The recommend value for the parameter is n-1, where n is the
size of the FIFO buffer for your modem.
To change the FIFO transmit size for your modem:
1. Open the Settings notebook and select the Ports tab.
2. From the Configured ports field, select your COM port, then select the
Change push button.
3. From the COM port tab, specify a number in the Transmit FIFO size (0-16)
field to replace the default.
4. Close the COM port tab and close the Ports tab.
5. Close the Settings notebook.
6. Stop the LAN Distance product and shut down and restart your workstation
so this change can take effect.
ΓòÉΓòÉΓòÉ 16.9.6. Secure LAN Distance Workstation Does Not Call Back ΓòÉΓòÉΓòÉ
If you dial a secure LAN Distance workstation and a "Waiting for Callback"
message is displayed indefinitely in the Status field of the Phone Book, the
secure LAN Distance workstation may fail to respond for one of these reasons:
The secure LAN Distance workstation is turned off, or the LAN Distance
product is not started. Verify that the secure LAN Distance workstation
is turned on and the LAN Distance product is started.
The phone book entry the secure LAN Distance workstation uses to call
back the dialing workstation is incorrect. Check the phone book entry
name and the information defined for the phone book entry.
ΓòÉΓòÉΓòÉ 16.9.7. Using Duplicate LAN Adapter Address ΓòÉΓòÉΓòÉ
If a connection to a LAN Distance Connection Server is established temporarily,
then the following message is displayed.
WCL0310W: The call to 'EntryName' has disconnected.
This message may be displayed because your LAN Distance logical adapter network
address not unique. Consult your LAN administrator to find out if your LAN
Distance logical adapter network address is assigned to a resource on the LAN.
To specify a new LAN Distance logical adapter network address, complete these
steps:
1. Open the Settings notebook and select the Address tab.
2. Specify a new address in the LAN Distance logical adapter network address
field.
3. Close the Settings notebook, then shut down and restart your workstation
so your new address is active.
ΓòÉΓòÉΓòÉ 16.9.8. WCL0336E Message for Non-LAN Distance Destination Mismatch ΓòÉΓòÉΓòÉ
The Connect to a non-LAN Distance destination field must be the same (enabled
or disabled) on the dialing and answering workstations to establish a
connection. If this selection is different, one of the following error
messages is displayed.
WCL0336E: The called workstation did not respond to requests
to exchange information with the LAN Distance
product.
WCL0310W: The call to 'EntryName' has disconnected.
In general, the Connect to a non-LAN Distance destination option should not be
selected. If neither workstation has LAN Distance security enabled, you can
select the Connect to a non-LAN Distance destination field to improve
performance of the LAN Distance connection.
To verify or change the setting for Connect to a non-LAN Distance destination:
1. Open the Settings notebook and select the Workstation tab.
2. Change the Connect to a non-LAN Distance destination.
3. Close the Settings notebook.
4. Close the LAN Distance Workstations and shut down and restart your
workstation to make this change effective.
ΓòÉΓòÉΓòÉ 16.9.9. External Modem Configuration Overriding LAN Distance Modem Settings ΓòÉΓòÉΓòÉ
If you have problems using your modem with the LAN Distance product, the
external configuration settings for your modem may be overriding some of the
configuration settings (AT commands) required by the LAN Distance product. Use
your modem manual to assure the external settings of your modem do not override
the required settings for the LAN Distance product described in Creating a New
PIF File for a Modem Not in the List.
Most modems can be configured to work with the LAN Distance product simply by
selecting the supported modem (PIF file) from the Available modem types list
box. However, some modems such as the IBM 7855 modem, require external
configuration to work with the LAN Distance product. See Modems Requiring
External Configuration.
ΓòÉΓòÉΓòÉ 16.9.10. Serial (COM) Port Speed Needs Adjusting ΓòÉΓòÉΓòÉ
If the value for the SerialPortSpeed parameter in the WCLNET.INI file is too
large, you can experience trouble establishing and maintaining a LAN Distance
connection. Errors indicating that your FIFO or non-FIFO serial port speed is
too large include WCL0221, WCL0336, and spontaneous disconnects.
If you experience these errors, reduce the value of the SerialPortSpeed
parameter in the WCLNET.INI file:
1. Stop the LAN Distance product.
2. Open the WCLNET.INI file in the WAL directory and locate the
SerialPortSpeed value.
3. Using any text editor, try reducing this value as follows:
38400 to 19200
19200 to 14400(**)
14400 to 9600
4. Close the WCLNET.INI file and save your changes.
Note: If you later change port and modem assignments through the
Settings notebook, the WCLNET.INI file is recreated and changes made to
the SerialPortSpeed parameter are not saved.
5. Start the LAN Distance product.
ΓòÉΓòÉΓòÉ 16.10. Problems Using Point-to-Point Protocol ΓòÉΓòÉΓòÉ
If you are using point-to-point protocol (PPP), you might have problems with
the following:
Establishing a PPP connection
Using the password authentication protocol (PAP) or the
challenge-handshake authentication protocol (CHAP)
Resolving the IP address for a PPP connection
The following sections provide information about how you can correct these
problems.
ΓòÉΓòÉΓòÉ 16.10.1. Problems Establishing a PPP Connection ΓòÉΓòÉΓòÉ
If you are unable to establish a point-to-point protocol (PPP) connection,
check the following:
Check the settings notebook and make sure auto startup for the connection
server services is set.
Check the port/modem status. From the LAN Distance - Workstation window,
choose Selected, Open as, and call and port management.
ΓòÉΓòÉΓòÉ 16.10.2. Problems Using PAP or CHAP Authentication ΓòÉΓòÉΓòÉ
If you are having problems using either the password authentication protocol
(PAP) or the challenge-handshake authentication protocol (CHAP), check the
following:
Check that the Security Enabled setting is properly configured in the
settings notebook
Ensure that the correct authentication setting is specified in the
\WAL\WCLLOCAL.INI file. In the file, the PPPsecurity parameter can be
set to PAP, CHAP, or both. For more information, see Specifying PPP
Parameters in the \WAL\WCLLOCAL.INI File.
ΓòÉΓòÉΓòÉ 16.10.3. Problems Resolving IP Addresses for PPP Connections ΓòÉΓòÉΓòÉ
If you are having problems resolving IP addresses for a PPP connection, check
the following:
Ensure that the correct IP address options are specified in the
\WAL\WCLLOCAL.INI file. In the file, you can set the ObtainIPaddr
parameter to LIST, DHCP, and USERSPEC. For more information, see
Specifying PPP Parameters in the \WAL\WCLLOCAL.INI File.
If you specify the USERSPEC option for the ObtainIPaddr parameter in the
\WAL\WCLLOCAL.INI file, check the IP address configuration on the client
workstation.
If you specify the LIST option for the ObtainIPaddr parameter in the
\WAL\WCLLOCAL.INI file, check that the \WAL\WCLIPADR.INI file has a
sufficient number of addresses to equal the number of PPP connections.
For more information, see Using the Local IP Address Listing.
If you specify the DHCP option for the ObtainIPaddr parameter in the
\WAL\WCLLOCAL.INI file, check that a DHCP server is available on the
network and that the server is configured correctly.
ΓòÉΓòÉΓòÉ 16.11. Problems Running DOS LAN Requester ΓòÉΓòÉΓòÉ
The following problems can occur when using the IBM LAN Server and Requester
products with the LAN Distance product.
DOS LAN Requester cannot start
Inability to log on to the LAN Server Domain Controller
Before trying any of the solutions described here, verify that your LAN
Server and LAN Requester workstations are set up correctly. See Using LAN
Server and LAN Requester.
ΓòÉΓòÉΓòÉ 16.11.1. DOS LAN Requester Cannot Start ΓòÉΓòÉΓòÉ
If you start DOS LAN Requester after you start MS Windows, you will receive the
following message:
Cannot start because of a program conflict
To resolve this error, start DOS LAN Requester before you start MS Windows by
typing NET START from a DOS command line. If you want to autostart DOS LAN
Requester, add the NET START statement to the AUTOEXEC.BAT file.
ΓòÉΓòÉΓòÉ 16.11.2. Inability to Log On to the LAN Server Domain Controller ΓòÉΓòÉΓòÉ
If you are running version 2.0 or 3.0 of the DOS LAN Requester product on a MS
Windows LAN Distance Remote, you may experience problems logging on to the LAN
Server Domain Controller. The DOS LAN Requester code incorrectly defaults the
mailslot number to 0 instead of 3.
To avoid logon problems, install CSD IPO7003 for the DOS LAN Requester product.
This CSD correctly defaults the mailslot number to 3.
If you do not have access to this CSD, make the following change to the /NMS
(mailslot number) parameter:
1. From the MS Windows RUN command line, open the DOSLAN directory and
locate the DOSLAN.INI file.
2. Use an ASCII editor to change the value for /NMS:0 to /NMS:3.
ΓòÉΓòÉΓòÉ 16.12. Problems Running IBM LAN Server and Requester ΓòÉΓòÉΓòÉ
The following problems can occur when using the IBM LAN Server and Requester.
Logon problems
Large file copy problems
Insufficient NetBIOS resources
ΓòÉΓòÉΓòÉ 16.12.1. Logon Problems with IBM LAN Server 2.0 ΓòÉΓòÉΓòÉ
If you install the LAN Server 2.0 product after installing the LAN Distance
product, you may experience problems when you try to log on to the LAN Server
from the LAN Distance Remote running LAN Requester.
The following messages indicate a compatibility problem between the NetBIOS
driver shipped with the LAN Distance product and the NetBIOS driver shipped
with LAN Server 2.0.
LAN Requester failing to start.
or
Failed logon attempt.
If you enter NET ERROR at the OS/2 command prompt, the following messages are
displayed:
NET3106: An unexpected NCB was received.
NET3140: The service has stopped due to repeated
consecutive occurrence of an NCB error.
To resolve this error, make the NetBIOS driver required by the LAN Server 2.0
product the active NetBIOS driver.
1. From an OS/2 command prompt, type:
cd \IBMCOM\PROTOCOL
2. Make the NetBIOS driver used by IBM LAN Server 2.0 active by typing the
following command:
COPY A:\NETBIOS.LS2 NETBIOS.OS2
3. Shut down and restart your LAN Distance workstation.
ΓòÉΓòÉΓòÉ 16.12.2. Inability to Log On to the LAN Server ΓòÉΓòÉΓòÉ
If you can establish a connection from the LAN Distance Remote to the LAN
Distance Connection Server, but cannot log on to the LAN Server using LAN
Requester, one of the following messages is displayed:
Domain Controller not Available.
or
The Server is not responding.
If you receive one of these messages, complete the following steps, then try
logging on to the LAN Server:
1. Complete the steps for setting up LAN Requester and LAN Server described
in Modifying LAN Server and Requester Configurations.
2. Verify and adjust the LAN Distance bridge hop count. LAN Requester data
frames may not be able to reach the LAN Server because the hop count at
intervening bridges is not large enough. See Understanding Token-Ring
Bridges and Example 2: Using OS2PING to Verify the LAN Distance Bridge
Hop Count.
3. Verify that the LAN Distance bridge configuration values (bridge number,
LAN segment ring number, and WAN segment ring number) are configured
correctly at the LAN Distance Connection Server. See Settings Notebook,
Bridge Tab.
4. Verify that filtering is enabled on the LAN Distance Connection Server.
See Types of Filtering Supported for the LAN Distance Bridge.
5. Adjust serial (COM) port speed for your modem. See Serial (COM) Port
Speed Needs Adjusting.
6. Adjust the FIFO transmit buffer size for your modem, see FIFO Transmit
Size Needs Adjusting.
ΓòÉΓòÉΓòÉ 16.12.3. Insufficient NetBIOS Resources ΓòÉΓòÉΓòÉ
When running IBM LAN Server 4.0 with IBM LAN Distance Advanced Server you may
experience problems with insufficient NetBIOS resources. Two possible symptoms
indicate this problem:
When starting LAN Distance error message WCL554 appears stating that the
LAN Distance product requires more NetBIOS resources than are available.
The NetBIOS protocol does not load at system startup.
If either of these symptoms occur, the following steps are recommended:
NOTE: Restart your workstation after each step to see if the problem is
solved. If the problem remains, try the next step.
1. Remove any unnecessary NetBIOS applications.
2. Edit the \IBMLAN\IBMLAN.INI file.
In the [Network] section, reduce the number of NCBs. See example below:
Γòæ
V
NETx=NETBEUI$, 0, LM10, yyy , 175, zzz
to
Γòæ
V
NETx=NETBEUI$, 0, LM10, yyy , 125, zzz
where x = 1,2....
yyy = Number of Netbios Sessions
zzz = Number of Netbios Names
3. Determine the maximum number of calls that are expected to dial into the
LAN Distance server at any one time.
Edit the \WAL\WCLLOCAL.INI file with any ASCII editor.
Under [SRDDEFS] reduce the SESSIONS = parameter from 32 to the
maximum number of calls.
For example, if you expect a maximum of 16 calls at any one time,
set SESSIONS = 16.
Change COMMANDS = 90 to the new SESSIONS value times 3.
For example, if the new SESSIONS value is 16, then set COMMANDS to
48. This reduces the number of NetBIOS resources that the LAN
Distance product will attempt to take when it is started.
[SRDDEFS] [SRDDEFS]
maxconversations = 10 maxconversations = 10
adapter = 2 adapter = 2
sessions = 32 to sessions = 16
commands = 90 commands = 48
datagram = 6 datagram = 6
ΓòÉΓòÉΓòÉ 16.12.4. Large File Copy Problems ΓòÉΓòÉΓòÉ
When copying files larger than 2 KB or using XCOPY to copy multiple files, the
file(s) may not be copied, or may not be copied completely.
You may receive one of the following messages.
NET3193: A virtual circuit error occurred on the session
to STLCORE. The NCB command and return code are
the data.
NET3190: Netwksta Internal Error has occurred.
1. Complete the steps for setting up LAN Requester and LAN Server described
in Modifying LAN Server and Requester Configurations.
2. Adjust the serial (COM) port speed for your modem. See Serial (COM) Port
Speed Needs Adjusting.
3. Adjust the FIFO transmit buffer size for your modem, see FIFO Transmit
Size Needs Adjusting.
ΓòÉΓòÉΓòÉ 16.12.5. File Copy Problems on TCPIP Network ΓòÉΓòÉΓòÉ
You will not be able to copy large files from a file server after you have made
a successful point-to-point (PPP) connection if you have not correctly
configured the TCPIP maximum transmission unit (MTU) value for your network
environment.
Symptoms include the following:
You are able to edit and copy very small files on the file server from
your PPP client.
When you try to copy larger files on the file server from your PPP
client, the OS/2 session where the copy command was issued appears to
hang.
After your copy command appears to hang, other TCPIP commands, such as
PING, do not work in other OS/2 sessions on the PPP client.
IP traces show that the file server received the commands, but does not
respond back.
Check the documentation for your adapter on the PPP Server and verify that the
MTU values currently configured on both the PPP Server and the PPP client are
not greater than the MTU value specified in your documentation.
The following table lists the MTU values for common communiciations adapters.
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Table 32. Common Communications Adapters MTU Values Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé MAXIMUM TRANSMISSION UNIT Γöé ADAPTER Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 1500 Γöé Default Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 1462 Γöé PCNet Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 1492 Γöé Ethernet on an IEEE 802.3 network Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 4400 Γöé Token-Ring 16/4 Adapter/A card on a 16 MB Γöé
Γöé Γöé token-ring network Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 576 Γöé X.25 coprocessor Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓòÉΓòÉΓòÉ 16.13. IBM Communications Manager 3270 Emulation Error Message ΓòÉΓòÉΓòÉ
If your LAN Distance Remote is running the 3270 emulation feature of IBM
Communications Manager/2 to access a host on a LAN, and you receive one of the
following messages, LAPS is configured incorrectly. To configure LAPS, see
Setting Up to Run LAN Applications Remotely.
ACS 2390 ALERT: An unexpected OS/2 function call
or
802.2 LAN Transport error has closed the logical LAN adapter
Set up considerations for using the 3270 emulation feature of Communications
Manager/2 are described in Using the Communications Manager/2 3270 Emulation
Feature.
ΓòÉΓòÉΓòÉ 16.14. Banyan VINES Requester Error Message ΓòÉΓòÉΓòÉ
If source routing is not configured for the Banyan VINES Requester and Server,
the following message is received when the BAN/nl command is issued from the
Banyan VINES Requester.
BAN: Unable to establish communications to the VINES Server.
See your system administrator.
To configure source routing for the Banyan VINES Requester, see Setting Up the
Banyan VINES Requester.
To configure source routing for the Banyan VINES Server, see Configuring Source
Routing for the Banyan VINES Server.
ΓòÉΓòÉΓòÉ 16.15. Avoiding the NetWare Connection Error on the NetWare Requester ΓòÉΓòÉΓòÉ
The following message can occur when you restart the LAN Distance Remote after
the NetWare Requester product is installed on the LAN Distance Remote. This
message occurs because the NetWare Requester is trying to locate the NetWare
Server before a LAN Distance connection is established.
NWD0115: Error getting connection ID (0X880F)
To avoid this error message when you start your workstation:
1. Use an ASCII editor to comment out the following statement in your
CONFIG.SYS file:
REM RUN C:\NETWARE\NWDAEMON.EXE
2. Restart your workstation and establish a connection to your LAN Distance
Connection Server. Before logging on to the NetWare Server, type the
following at an OS/2 command prompt:
DETACH C:\NETWARE\NWDAEMON.EXE
3. Each time you restart your workstation, complete step Avoiding the
NetWare Connection Error on the NetWare Requester before logging on to
the NetWare Server.
ΓòÉΓòÉΓòÉ 16.16. Delay When Starting Up Your LAN Application ΓòÉΓòÉΓòÉ
Certain applications are optimized for the LAN Distance connections.
Client-server applications, such as IBM Communications Manager/2, that are
installed on the LAN Distance Remote and pass data to the LAN are ideal for
use with the LAN Distance product.
Applications loaded on an application server, such as word processors,
spreadsheets, and databases, and started remotely from a LAN Distance Remote,
transmit executable files over the LAN Distance WAN connection, causing a start
up delay. For example, a 1 Mb file can easily take 10 minutes to load over a
LAN Distance WAN connection at speeds of 14400 bps. For more information, see
Setting Up LAN Applications for Remote Access.
If you experience a lengthy delay when you start up a LAN application from an
application server on the LAN, try the following solutions:
Move the application to the LAN Distance Remote and use the LAN Distance
connection to pass the data from the application to the LAN. For example,
install the word processing application on the LAN Distance Remote and
access the document files from the LAN.
Move part of the application to the LAN Distance Remote and use the LAN
Distance connection to access the remainder of the application. For
example with NetWare, you can copy the LOGON.EXE file to the LAN Distance
Remote, significantly shortening the logon process.
While working with client-server applications remotely, you can
simultaneously use a remote control application over the LAN Distance
connection to access large, non-client-server applications on the LAN.
ΓòÉΓòÉΓòÉ 16.17. Microcom Modem ΓòÉΓòÉΓòÉ
The following problems occasionally occur when using the Microcom modem with
the LAN Distance product:
After having successfully connected with the Microcom modem, further
attempts to reconnect with the modem or to connect with another modem
have failed.
The Microcom modem will not initially connect with certain modems.
The following are symptoms of the above problems:
The modem appears "deaf" to dialing strings.
The modem fails to go off hook.
The modem DTR signal fails to turn on.
Using other PIF files, specifically MICROPRT.PIF, will alleviate the problems
in a few cases.
ΓòÉΓòÉΓòÉ 17. Using System Management Tools ΓòÉΓòÉΓòÉ
This chapter describes how to use the following LAN Distance system management
tools to manage any LAN Distance workstation that you have the authority to
access. Use these tools to monitor use of ports and modems; view LAN Distance
bridge statistics; and gather audit statistics related to security, calls, and
links.
Call and Port Management
Manages communication resources for a workstation. Using call and port
management, you can monitor port use and, if necessary, disconnect a call
through a port. You also can monitor, start, and stop modem types. For
more information, see Call and Port Management.
Tracking Notebook
Gathers management data for a selected workstation. Using the tools in the
Tracking notebook, you can collect LAN Distance workstation configuration
and statistical information regarding security, calls, and links. For more
information, see Using the System Management Tools in the Tracking Notebook.
SNMP for LAN Distance Bridge Management
Gathers LAN Distance bridge configuration and statistical information to use
for performance tuning. For more information, see Managing the LAN Distance
Bridge Using the TCP/IP SNMP Tool.
ΓòÉΓòÉΓòÉ 17.1. Call and Port Management ΓòÉΓòÉΓòÉ
Call and port management provides information about ports and modem types.
Port
A physical device that enables connections for a workstation.
Modem type
A manager that logically groups the operation of ports for a workstation.
You can use call and port management when:
Your LAN Distance Remote starts a connection with another LAN Distance
workstation, but cannot complete the connection. Use call and port
management to disconnect the call.
Your LAN Distance Connection Server must be shut down for maintenance.
Use call and port management to stop modem types and disconnect any LAN
Distance Remotes after they complete their necessary communications.
(This is known as a "soft stop".)
An authorized user accesses your LAN Distance Connection Server. Use
call and port management to stop the related modem type and immediately
disconnect the user. (This is known as a "hard stop".)
Call and port management windows display information about ports and modem
types for LAN Distance workstations.
You can select and manage a specific port or modem type. Call and Port
Management Views for Port and Modem Types shows how call and port management
windows can be used to manage ports and modem types. Like other LAN Distance
product functions, call and port management is object-oriented.
You can perform call and port management for any LAN Distance workstation that
you can select and access in the LAN Distance Workstations window. In Call
and Port Management Views for Port and Modem Types, a Call and Port Management
- Port View is displayed for the LAN Distance Remote while a Call and Port
Management - Modem Type View is displayed for the LAN Distance Connection
Server. You can display either view for a selected LAN Distance workstation.
Call and Port Management Views for Port and Modem Types
ΓòÉΓòÉΓòÉ 17.1.1. Viewing Call Activity for a Port ΓòÉΓòÉΓòÉ
Call and port management displays information about the ports used by a LAN
Distance workstation. Use this information to make management decisions
regarding the use of port resources. For example, if you end a call, but the
port does not appear to disconnect, you can verify the status of the port.
Based upon this information, you can decide whether to disconnect the port.
Call and port management provides the following information:
Call direction
Local phone number
Status or availability
User ID
Modem type
Connection type
Connection speed
Entry name
Workstation name
To display port information:
1. Open the LAN Distance Workstations window.
2. Select the icon of the workstation to be managed, then Selected, Open as,
and Call and port management.
The Call and Port Management - Port View window (Call and Port Management
- Port View Window) is displayed.
Call and Port Management - Port View Window
The Call and Port Management - Port View window displays information regarding
each port used by a LAN Distance workstation. The Call and Port Management -
Port View is 1 of 2 main views for call and port management. (The Call and
Port Management - Modem Type View displays information about modem types,
which manage the ports. See Viewing Call Activity for a Modem Type.)
Port information includes:
Call Direction
A call can have 1 of 5 directions:
Note: Port icons only display connection arrows when a call session is
active.
Active permanent connection
The call is active for a permanent or leased line connection.
Inactive permanent connection
No call is active for a permanent or leased line connection.
Inactive port
No call is active for the port.
Incoming call
The call is coming into the port from another location. When an
incoming call is disconnected and you dial the previous caller, the
port displays an incoming call.
Outgoing call
The call is going out from the port to another location.
Local Phone Number
Displays the local phone number used for the port. If you do not configure a
phone number, "Unspecified" is displayed.
Status
Displays the status of a call for the port. The status can be:
Available The port is available for use.
Connected The call is physically established and can incur phone
charges.
Connecting The port is establishing a connection.
Disconnecting The call is ending. If the call remains in a
disconnecting status for a long time, the call has not
properly disconnected.
Unavailable The port is unavailable for use. For example, a port
can be unavailable when its modem type is stopped.
User ID
Displays the logon ID of the LAN Distance user when security is enabled and
a connection is established.
Modem Type Name
Displays the name of the modem type used for a port. For example, an
asynchronous leased line can be named ASYNCLL.
Modem Type Status
Displays the status of the modem type used for a port.
Started The modem type is started and available for use.
Starting The modem type is currently starting.
Stopped The modem type is stopped.
Stopping The modem type is currently stopping.
Connection Type
Displays the connection type used for a call. The connection type can be:
Integrated Services Digital Network
Although ISDN is not a modem, a connection type can manage ISDN
ports.
Public Switched Telephone Network
After the call is connected, the true connection type can be
asynchronous or synchronous.
Connection Speed
Displays the speed of the connection for active calls.
Entry Name
Indicates the name used in the phone book for the answer criteria or an
outgoing call when calls are active.
Workstation Name
Displays the name of the called workstation when calls are active.
ΓòÉΓòÉΓòÉ 17.1.2. Viewing Connection Details for a Port ΓòÉΓòÉΓòÉ
If you need information about how a port is being used, call and port
management provides actual port connection details. For example, to verify the
charges that are incurred for a call, you can use the Connection Details
window. The Connection Details window can display the call start time of the
connection.
To display port connection details:
1. Open the LAN Distance Workstations window.
2. Select the icon of the workstation to be managed, then Selected, Open as,
and Call and port management.
The Call and Port Management - Port View window (Call and Port Management
- Port View Window) is displayed.
3. Select a port, and then Open as Connection details.
The Connection Details window is displayed.
Connection Details Window
The Connection Details window displays information about the connection
established by a port. Connection details include:
Start time
Displays the time the call was established for the port.
Start date
Displays the date the call was established for the port.
Remote number
Displays the telephone number of the workstation you called. The remote
number of an incoming call is displayed only for an ISDN configured call.
Mode
Displays the mode of a port. Depending on the modem type that controls the
port, the field displays:
Non-switched
The port connection uses a physical link that does not require
dialing. The port has either a PSTN or ISDN modem type.
Permanent
The port connection uses a leased line, such as a null modem cable.
The port has a ISDN modem type.
Switched
The port connection uses a telephone network. The port has either a
PSTN or ISDN modem type.
DSR (Data Set Ready) Signal
Indicates whether the modem signal is ready to receive information. The
field displays:
0 A signal is not present.
1 A signal is present.
Note: If the port is not connected or uses ISDN, the field is blank.
CD (Carrier Detect) Signal
Indicates whether the modem detects a carrier signal. The field displays:
0 A signal is not present.
1 A signal is present.
Note: If the port is not connected, the field is blank.
Port name
Displays the alias assigned to the port. If the port uses ISDN, an alias is
not displayed.
ΓòÉΓòÉΓòÉ 17.1.3. Disconnecting a Call ΓòÉΓòÉΓòÉ
When you need to disconnect a port from a connection, you can use call and port
management. For example, if a port has a physical connection but does not
respond, you can disconnect the port and try to reconnect. Disconnecting a port
can help you manage your port resources. For example, you can disconnect a
call if a call is stuck or an unauthorized user accesses the LAN Distance
Connection Server.
Warning: When you disconnect a call, any active processing related to the call
stops, and related data can be lost.
To disconnect a call:
1. Open the LAN Distance Workstations window.
2. Select the icon of the workstation to be managed, then Selected, Open as,
and Call and port management.
The Call and Port Management - Port View window (Call and Port Management
- Port View Window) is displayed.
3. Select a port for which you want to disconnect a call, then select
Selected, and Hangup.
The port is disconnected.
ΓòÉΓòÉΓòÉ 17.1.4. Viewing Call Activity for a Modem Type ΓòÉΓòÉΓòÉ
Call and port management displays information about the modem types that manage
LAN Distance workstation ports. You can use this information to manage modem
types. For example, to see the ports managed by a modem type for a LAN
Distance Remote, use the Call and Port Management - Modem Type View window.
Call and port management provides the following information about modem types:
Mode type name
Status
Connection type
Number of defined ports
To display modem type information:
1. Open the LAN Distance Workstations window.
2. Select the icon of the workstation to be managed, then Selected, Open as,
and Call and port management.
The Call and Port Management - Port View window (Call and Port Management
- Port View Window) is displayed.
3. Select View, then Modem types.
The Call and Port Management - Modem Type View window (Call and Port
Management - Modem Type View Window) is displayed.
.
Call and Port Management - Modem Type View Window
The Call and Port Management - Modem Type View provides information about
modem types. The Call and Port Management - Modem Type View is 1 of 2 main
views for call and port management. (The Call and Port Management - Port View
displays information about all the ports on a LAN Distance workstation. See
Viewing Call Activity for a Port) Modem type information includes:
Name
Displays the name of the modem type used for a port. For example, an
asynchronous leased line can be named ASYNCLL.
Status
Displays the status for the modem type. The status can be:
Started The modem type is started and available for use.
Starting The modem type is currently starting.
Stopped The modem type is stopped.
Stopping The modem type is currently stopping.
Connection Type
Displays the connection type this modem uses. The connection type can be:
Integrated Services Digital Network
Although ISDN communication does not require a modem, a LAN Distance
modem type can manage ISDN ports.
Public Switched Telephone Network
After the call is connected, the true connection type can be
asynchronous or synchronous.
Ports Defined
Displays the number of ports defined for a modem type. The number varies
according to the kind of modem type used:
ISDN Number of B channels
PSTN Number of ports
ΓòÉΓòÉΓòÉ 17.1.5. Viewing the Ports Managed by a Modem Type ΓòÉΓòÉΓòÉ
Call and port management provides detailed information about the ports managed
by a modem type. You can use this information to make management decisions
regarding the use of a specific port or set of ports. For example, if a
security breach occurs and requires you to disconnect all incoming calls for a
specified modem type, use the Modem Type Details window.
To display detailed information about a modem type:
1. Open the LAN Distance Workstations window.
2. Select the icon of the workstation to be managed, then Selected, Open as,
and Call and port management.
The Call and Port Management - Port View window (Call and Port Management
- Port View Window) is displayed.
3. Select View, then select Modem types.
The Call and Port Management - Modem Type View window is displayed.
4. Select a modem type, then Selected, and Open as Modem Type details.
The Modem Type Details window (Modem Type Details Window) is displayed.
Modem Type Details Window
The Modem Type Details window displays the individual ports for the selected
modem type. Ports displayed in the Modem Type Details window are logically
grouped according to their modem type.
Call Direction
A call can have 1 of 5 directions:
Note: Port icons only display connection arrows when a call session is
active.
Active permanent connection
The call is active for a permanent (leased-line) connection.
Inactive permanent connection
No call is active for a permanent (leased-line) connection.
Inactive port
No call is active for the port.
Incoming call
The call is coming into the port from another location. When an
incoming call is disconnected and you dial the previous caller, the
port displays an incoming call.
Outgoing call
The call is going out from the port to another location.
Local Phone Number
Displays the local phone number used for the port. If you do not configure
a phone number, "Unspecified" is displayed.
Status
Displays the status of a call for the port. The status can be:
Available The port is available for use.
Connected The call is physically established and can incur phone
charges.
Connecting The port is establishing a connection.
Disconnecting The call is ending. If the call remains in a
disconnecting status for a long time, the call has not
properly disconnected.
Unavailable The port is unavailable for use. For example, a port
can be unavailable when its modem type is stopped.
User ID
Displays the logon ID of the LAN Distance user when security is enabled and
a connection is established.
Connection Type
Displays the connection type used for this port. The connection type can
be:
Integrated Services Digital Network
Although ISDN is not a modem, a connection type can manage ISDN
ports.
Public Switched Telephone Network
After the call is connected, the true connection type can be
asynchronous or synchronous.
Connection Speed
Displays the speed of the connection for active calls.
Entry Name
Indicates the name used in the phone book for the answer criteria or an
outgoing call when calls are active.
Workstation Name
Displays the name of the called workstation when calls are active.
ΓòÉΓòÉΓòÉ 17.1.6. Stopping a Modem Type ΓòÉΓòÉΓòÉ
Call and port management lets you stop a modem type and stop all of its port
connections. For example, before you bring down a LAN Distance Connection
Server for maintenance, you can stop the related modem types. This ensures
that all active port connections are disabled before shutdown.
Warning: If you stop a modem type, any call connection using that modem type
are ended.
Because stopping a modem type ends connections, you can stop a modem type in 1
of 2 ways: soft or hard.
A soft stop stops a modem type after all current connections complete.
A soft stop can be used to bring down a LAN Distance Connection Server
for maintenance and avoid interrupting current calls.
A hard stop immediately ends a connection for a modem type. A hard stop
can be used to quickly bring down a LAN Distance Connection Server or
disconnect active calls in an emergency.
To stop a modem type:
1. Open the LAN Distance Workstations window.
2. Select the icon of the workstation to be managed, then Selected, Open as,
and Call and port management.
The Call and Port Management - Port View window (Call and Port Management
- Port View Window) is displayed.
3. Select View, then Modem types.
The Call and Port Management - Modem Type View window (Call and Port
Management - Modem Type View Window) is displayed.
4. Select a modem type, then select Selected.
5. You can stop a modem type in 1 of 2 ways:
To stop a modem type after all currently processing activities
complete, select Stop soft.
To stop a modem type immediately, regardless of outstanding calls,
processing calls, or answering calls, select Stop hard.
The modem type is stopped.
ΓòÉΓòÉΓòÉ 17.1.7. Starting a Modem Type ΓòÉΓòÉΓòÉ
Call and port management lets you start modem types that have been stopped.
To start a modem type:
1. Open the LAN Distance Workstations window.
2. Select the icon of the workstation to be managed, then Selected, Open as,
and Call and port management.
The Call and Port Management - Port View window (Call and Port Management
- Port View Window) is displayed.
3. Select View, then Modem types.
The Call and Port Management - Modem Type View window (Call and Port
Management - Modem Type View Window) is displayed.
4. Select a modem type, then Selected and Start.
The modem type is started.
ΓòÉΓòÉΓòÉ 17.2. Using the System Management Tools in the Tracking Notebook ΓòÉΓòÉΓòÉ
The Tracking notebook lets you monitor several different aspects of a LAN
Distance workstation. Like other LAN Distance product functions, the Tracking
notebook is object-oriented. You can use tracking management for any
workstation that you can select and access in the LAN Distance Workstations
window.
The ability to use tracking functions depends on your user type and the
location of the LAN Distance workstation that you intend to manage. Your user
type can be:
Administrator
A user who can perform advanced LAN Distance management functions.
User
A user who can perform basic LAN Distance functions.
You can manage the LAN Distance workstation from 2 locations:
Locally Managing locally occurs when you are using the managed LAN Distance
workstation. For example, you can locally manage the LAN Distance
Remote that you are using at your desk.
Remotely Managing remotely occurs when you are not sitting at the managed LAN
Distance workstation. For example, you can remotely manage a LAN
Distance Connection Server in another building using the LAN Distance
Remote at your desk.
The Tracking notebook consists of many tabs, which display according to user
type and location of the target workstation. The functions available in the
Tracking notebook are:
General
Trace
Dump
Audit
Retrieve
This section describes audit and retrieve, which are instrumental tools for
system management. General, trace, and dump are used for problem
determination. For more information about problem determination, see
Detecting and Resolving Errors.
ΓòÉΓòÉΓòÉ 17.2.1. Using the Auditing Tool ΓòÉΓòÉΓòÉ
Audit is an administrative tool that captures statistical information about:
Security
- logon errors and security violations
- changes to user account, personal account, or security policy
Calls
- call origin
- start time
- stop time
Links
- bytes passed
- bytes retransmitted
This information is logged to the audit file. You can create a program to
automatically extract information from the audit file to create reports, such
as weekly usage of LAN Distance by each user. The audit file can be accessed
locally or remotely using the Retrieve tool. See Using the Retrieve Tool.
With security enabled, only users designated as administrators are authorized
to use audit or retrieve its output. With security disabled, any user can use
audit or access its output.
An additional feature of audit is the ability to automatically start a
user-supplied program when the audit file is full, or at a scheduled time or
interval.
The audit features are available from the 3 pages of the Audit tab of the
Tracking notebook. To open the Audit tab:
1. Open the LAN Distance Workstations window.
2. Select the icon of the workstation to be audited, then Selected, Open as,
and Tracking.
The Audit tab (Tracking Notebook, Audit Tab) is displayed.
Tracking Notebook, Audit Tab
To audit your workstation:
1. In the Current settings group box, select the statistics to audit for
this workstation. If you locally change the current audit statistics
settings and close the Tracking notebook, you must start and stop the LAN
Distance product before your changes take effect.
2. Select the right arrow at the bottom of the window to go to page 2 (Audit
Tab, Page 2 of 3).
3. In the Filename of Audit file on xx field, enter the name for the audit
file, or use the default file name, WCLAUDIT.001. The xx displays the
Workstation name for the target workstation.
4. In the Maximum file size (in Kbytes) field, enter a maximum file size, or
use the default file size of 64.
5. In the File format group box, select either ASCII or Binary as the file
format.
6. Select the right arrow at the bottom of the window to see page 3 (Audit
Tab, Page 3 of 3).
7. Optional - In the Report program field, enter the name of the
user-supplied report program to be called when the program scheduling
conditions you specify in step Using the Auditing Tool are met.
8. To create a new file or overwrite the existing file when the audit file
exceeds its maximum size, select one of the following radio buttons from
the When Audit file is full group box:
New file Creates a new audit file
Wrap Overwrites the existing audit file
9. Optional - To run a user-supplied report program, select the Run program
check box.
10. Optional - To disable program scheduling, select Do not schedule in the
Program scheduling group box.
11. To specify when a user-supplied program runs, select one of the following
radio buttons:
Daily Runs the report program on a daily basis
Weekly Runs the report program on a weekly basis
Monthly Runs the report program on a monthly basis
12. To finish creating an audit file, select the Apply push button.
The audit file is created on the target workstation when the first audit
event occurs. If the target workstation is remotely managed, use the
Retrieve tab to access the audit file. For more information, see Using
the Retrieve Tool.
Audit Tab, Page 2 of 3
Audit Tab, Page 3 of 3
ΓòÉΓòÉΓòÉ 17.2.1.1. Selecting the Statistics to Audit ΓòÉΓòÉΓòÉ
Three different categories of statistics are available for auditing: security
statistics, call statistics, and link statistics. You can select more than 1
category from the Audit tab in the Tracking notebook.
Note: Security statistics is a valid selection even if the workstation is
configured with security disabled. No statistics are logged while security is
disabled, but when security is enabled statistics are logged without further
changes to the audit selection.
Select any combination of statistics you wish to enable in the Current Settings
group box:
Security statistics
Reports user ID and user account information
Calls statistics
Reports call session information
Link statistics
Reports call connection information
Note: When you locally change the current audit statistics settings and
close the Tracking notebook, you must start and stop the LAN Distance
product before changes take effect.
ΓòÉΓòÉΓòÉ 17.2.1.2. Security Statistics ΓòÉΓòÉΓòÉ
Security statistics are logged only if security is enabled. However, Security
statistics is a valid selection regardless of how security is configured.
Security statistics include the following events:
Session Duration/User ID
Logon and Logoff time and user ID are logged as entries.
Logon Errors
Logon errors include:
Invalid passphrase
Expired passphrase
New passphrase duplication
Invalid user ID
Inactive account
Logon limit exceeded
Invalid logon time
Invalid MAC address
User cancelled logon
No response from user
Unsolicited SRD link drop
User Account Database Changes
When an addition, change, or deletion is made to the user account or
security policy, an entry is made noting either the success or failure of
the action and the user ID attempting the action.
Security Status
When security is disabled, an entry is made noting either the success or
failure of the action and the user ID attempting the action.
The following example shows part of a security audit file. This entry
describes how the SECADMIN user made a logon attempt to a LAN Distance
Connection Server. This entry shows a date, time, LAN adapter address (MAC),
and user ID.
Security audit: 000168FE
Date: 1993/08/10 Time: 21:03:22
Logon
MAC address: 40003D1B754D
User ID: SECADMIN ((null))
Call ID: 16401318
ΓòÉΓòÉΓòÉ 17.2.1.3. Call Statistics ΓòÉΓòÉΓòÉ
Call statistics are captured at the beginning and end of a call.
Call statistics include:
Call origin This is the ID of the user who originated the call.
Call start This is the date and time the call was placed.
Call stop This is the date and time the call was concluded.
Call statistics Either active or inactive
The following example shows part of a call statistics audit. This entry
describes how the SECADMIN user at the COLBYREMOTE workstation started an
incoming call session. This entry shows:
Date
Time
Session ID
Connection instance
Connection type
Workstation name
User ID
LAN adapter address (MAC)
and other information
Call audit: Call started
Date: 1993/08/10 Time: 21:03:32 Duration: 0 seconds
Return code: 0000
Entry: PSTN_ALL_CALLS
Call ID: 16401318 Link instance: B20FDC78
Call type: Incoming
Link type: Incoming
Workstation: COLBYREMOTE
User: SECADMIN
MAC Address: 4000276D25F6
Number of calls: 1
Callback directory name:
Callback variable number:
ΓòÉΓòÉΓòÉ 17.2.1.4. Link Statistics ΓòÉΓòÉΓòÉ
Link statistics are captured at the time the link is terminated.
Link statistics include:
Total bytes received Total number of bytes received during a call session
Total frames received Total number of frames received during a call session
Total bytes transmitted Number of bytes sent during a call session
Total frames transmitted Total number of frames sent during a call session
The following example shows part of a link statistics audit. This entry
describes how the B20FDC78 call ID issued a disconnect request to a LAN
Distance Connection Server. This entry shows:
Audit event
Date
Time
Call ID
Instance type
Modem type
Local number
Link statistic: B20FD830
Audit event: Link stopping
Date: 1993/08/10 Time: 21:06:00Duration: 177 seconds
Return code:0000
Entry:
Link ID: B20FDC78
Instance type: Incoming - Disconnect request issued
PCM: ROLM244PC (VSERIES)
Local number: 80972
ΓòÉΓòÉΓòÉ 17.2.2. Specifying the Audit File and Its Characteristics ΓòÉΓòÉΓòÉ
Several controls over the audit file are available:
Name of the file
Maximum size of the file
Format of the file
Audit information can be saved to a single file that wraps when the
Maximum file size is reached, or another file can be created to hold
additional audit information when the Maximum file size is reached.
ΓòÉΓòÉΓòÉ 17.2.2.1. Audit File Default Path ΓòÉΓòÉΓòÉ
The default path for the audit file is \WAL. You have the option of specifying
a path other than the default in the Filename of Audit file on this workstation
field.
The file name is specified in the same field, located on Audit Tab, Page 2 of 3
in the Tracking notebook. The default file name is WCLAUDIT.001. This file is
stored on the target workstation. To define a unique file name, specify a file
name from 1 to 8 characters in length. For the 3-character file extension, you
can either:
Leave the numeric file extension blank so it can be sequentially numbered
from 001.
Specify the numeric extension (001 to 999) that you want sequential
numbering to start with. For example, if you entered STATSFIL.017, the
next audit file created will be named STATSFIL.018.
ΓòÉΓòÉΓòÉ 17.2.2.2. Deciding on the Format of the File ΓòÉΓòÉΓòÉ
The most compact form for a file is binary format. A binary format can be used
as input to some user-supplied parsers that format and display the contents.
The file can also be created in a more readable ASCII format. Both formats can
be used by a user-supplied program for displaying or reporting purposes.
Note: After the file is created in either of the 2 formats, audit cannot
convert from one format to the other. If you change the format, you should
also change the file name or extension, or both.
ΓòÉΓòÉΓòÉ 17.2.2.3. Specifying the Maximum Size of the Audit File ΓòÉΓòÉΓòÉ
The size of the file is specified on the Audit Tab, Page 2 of 3, in the
Tracking notebook. The size of the file must be from 1 to 5000 KB specified in
increments of 1 kilobytes (KB or 1024 bytes). For example, if you specify 100,
the file size will be 100,000 KB. The default size is 64 KB.
Because the size of the audit file can reach only 5000 KB, specify whether
audit information should be saved to a new file or overwrite the information in
the current file. Specify this option in the When Audit file is full group box
on the Audit Tab, Page 3 of 3 in the Tracking notebook.
New file
Select this radio button to create a new audit file when the audit file
exceeds its maximum size limit. For more information about how files are
automatically named see Audit File Default Path.
Wrap
Select this radio button to wrap new information and overwrite the existing
audit file when it exceeds its size limit.
These selections take effect as soon as you select Apply push button.
In addition, you can specify that a user-supplied program start as soon as the
maximum size limit is reached by the audit file. Use this option with either
the New file or Wrap options. For more information, see Automatically
Starting a User-Supplied Program.
ΓòÉΓòÉΓòÉ 17.2.2.4. Accessing the Audit File ΓòÉΓòÉΓòÉ
If you are at the workstation, you can access an ASCII audit file with any text
editor. If you are remote, you can access the audit file by using the Retrieve
tool. For more information, see Using the Retrieve Tool.
Note: The first 10 bytes of every audit file provide the file control
information and are always in binary format.
ΓòÉΓòÉΓòÉ 17.2.3. Automatically Starting a User-Supplied Program ΓòÉΓòÉΓòÉ
The ability to trigger a specified program to automatically generate audit
reports provides you with some flexibility in working with the audit file. You
can designate that a specified program automatically start based on a schedule
defined by you and/or when the audit file reaches the value defined for the
Maximum file size field.
ΓòÉΓòÉΓòÉ 17.2.3.1. Why Would You Want to Do This ΓòÉΓòÉΓòÉ
A frequent reason for automatically starting a user-supplied program is to
create a custom report that extracts only the information you require in a
format that suits your individual purpose. A user-supplied program can start
as soon as the audit file reaches the size you specified, or whenever you
schedule the program to start. Some additional reasons to start a user-supplied
program include archiving the audit file(s) to another system or notifying a
user that the audit file is full.
ΓòÉΓòÉΓòÉ 17.2.3.2. Specifying Which Program to Start ΓòÉΓòÉΓòÉ
Specify the name of the user-supplied program to start automatically on the
Audit Tab, Page 3 of 3, in the Tracking notebook. This must be a fully
qualified file name that includes the path. For example:
C:\ADMNPRGS\USERPROG.EXE
Or, the program must be in a path specified in the PATH= statement of the
CONFIG.SYS file.
This program can be an executable file or a REXX program.
ΓòÉΓòÉΓòÉ 17.2.3.3. How to Schedule the Program ΓòÉΓòÉΓòÉ
Specify when the user-supplied program should start by making 1 of the
following selections:
Select the Run program option on the Audit Tab, Page 3 of 3, so the
user-supplied program starts when the value in Maximum file size is
reached.
Schedule the program to run periodically by specifying a time to run the
program on the Audit Tab, Page 3 of 3.
Note: The program time selections are not mutually exclusive.
Daily Select the hour of the day to start the program.
Weekly Select the day of the week to start the program. Audit starts the
program as soon after midnight as possible of the scheduled day.
Monthly Select which day of the month you want the program to start. Audit
starts the program as soon after midnight as possible of the
specified day of the month. If you select the 31st of the month,
audit starts the program on the last day of the month.
When the LAN Distance program is running, it starts the user-supplied program
within a minute after the specified time. This occurs even if the
user-supplied program had just run due to reaching the Maximum file size
value. If the LAN Distance program is not running when the scheduled time
occurs, then the user-supplied program starts as soon as the LAN Distance
program is starting.
Note: While a user-supplied program can be run with either the wrap or new
file option, the wrap option is not recommended because with this option the
audit file contents can change at any time. This could result in program or
data errors.
When the user-supplied program starts, the LAN Distance Remote program passes
the following information as command line parameters:
File name Name of the audit file. For more information about how an
audit file is named, see Audit File Default Path.
File size Double word maximum size of the file in ASCII (actual size may
be less)
Indicators Two 1-byte indicators (in ASCII, for example "AN")
Format 'A' - ASCII
'B' - binary
File full option 'N' - new file
'W' - wrap
ΓòÉΓòÉΓòÉ 17.2.4. Using the Retrieve Tool ΓòÉΓòÉΓòÉ
Use the retrieve tool to obtain the following files from a LAN Distance
workstation that you are not using:
General information
Trace
Dump
Audit Log
Error Log
Message Log
Note: When you remotely configure the Settings notebook or retrieve the
audit file, your files can be detected by different types of media monitoring.
Passphrases or other sensitive information in these files are accessible to
other users. For example, if you had the following statements in your
CONFIG.SYS file:
SET HOSTNAME=USERID
SET TELNET.PASSPHRASE.ID=PASSPHRASE
Other users may be able to see your user ID and passphrase while retrieving
general information file.
To retrieve information remotely:
1. Open the LAN Distance Workstations window.
2. Select the icon of the LAN Distance Connection Server from which the
files are to be retrieved, then Selected, Open as, and Tracking.
3. Select the Retrieve tab (Tracking Notebook, Retrieve Tab).
4. In the File to retrieve from xx list box, select the file that you want
to retrieve from the target workstation. The xx displays the name of the
target workstation.
5. In the Filename to use on this workstation field, enter the name you want
the file to have at the local workstation that is to receive the file.
The default path is \WAL.
6. To finish retrieving the file, select the Retrieve push button.
The retrieved file is stored at the local workstation.
Tracking Notebook, Retrieve Tab
ΓòÉΓòÉΓòÉ 17.2.4.1. Deciding Which File to Retrieve ΓòÉΓòÉΓòÉ
Use the File to retrieve from xx list box to select a file that the Retrieve
tool can access:
Trace-output file
This is the file name you specified when you copied a trace file from the
Trace tab in the Tracking notebook. For more information, see Tracing for
OS/2 Workstations.
Audit-output file
This is the file name you specified on page 2 of the Audit tab in the
Tracking notebook. For more information, see Using the Auditing Tool.
Dump-output file
This is the file name you specified when you performed a dump from the Dump
tab in the Tracking notebook. For more information, see Dumping Information
to a File.
General information-output file
This is the name of the file you specified on the General tab when you
captured a workstation file. For more information, see Capturing
Workstation Configuration Information.
Message log
File name is WAL\WCL.DAT on the LAN Distance Connection Server. This
appears as message log in the list. For more information, see Viewing Error
Messages.
Error log
File name is \OS2\SYSTEM\LOG001.DAT on the LAN Distance Connection Server.
This appears as error log in the list.
Note: Use the default file name for the error log, so that the Retrieve
tool can use this information. For more information, see Viewing the Error
Log.
ΓòÉΓòÉΓòÉ 17.2.4.2. Naming the Retrieved Information ΓòÉΓòÉΓòÉ
Use the Filename to use on this workstation field to specify the file name that
the retrieved file receives when it is stored on the LAN Distance workstation
that you are using. The default directory is WAL. If you do not specify a
file name, a default file name is provided. The default file name is displayed
after you select a file to retrieve.
The format of the file name depends on the file system of the workstation where
the file is to be stored. A maximum of 256 characters can be used if the file
system used on the workstation where the file to be stored is the OS/2 HPFS
(high performance file system). But if that workstation's file system is FAT
(file allocation table), the maximum file name length is 8 characters with a
3-character extension.
If a file with that name already exists on the local workstation, a warning is
displayed, asking for confirmation to overwrite the file.
ΓòÉΓòÉΓòÉ 17.2.4.3. Starting the Retrieve Process ΓòÉΓòÉΓòÉ
Select the Retrieve push button to begin the retrieval process. No retrieval
occurs until this push button is selected. A notification is displayed of
either the success or failure of the retrieval.
ΓòÉΓòÉΓòÉ 17.3. Managing the LAN Distance Bridge Using the TCP/IP SNMP Tool ΓòÉΓòÉΓòÉ
Simple Network Management Protocol (SNMP) is a network management tool for
TCP/IP networks. For SNMP support, the LAN Distance product requires that OS/2
TCP/IP 1.2.1 or later be installed on your LAN Distance Connection Server.
You can set up the LAN Distance Connection Server to use SNMP to gather bridge
routing information, which can be used for performance tuning. Use the SNMP
product in the LAN Distance environment to:
View LAN Distance bridge statistics for base (dot1Base) and source
(dot1dSr) bridge functions. These functions are defined in Network
Working Group Request for Comments (RFC) 1236 and listed in Using SNMP to
Manage the LAN Distance Bridge .
View LAN Distance bridge statistics from an SNMP client workstation on
the LAN. If you want to use SNMP on a client workstation, complete step
Setting Up a LAN Distance Connection Server to U se SNMP in Setting Up
a LAN Distance Connection Server to Use SNMP for the client workstation.
To support SNMP, the LAN Distance Connection Server installs an SNMP bridge
subagent that interfaces with the SNMP agent provided in the TCP/IP for OS/2
product.
ΓòÉΓòÉΓòÉ 17.3.1. Setting Up a LAN Distance Connection Server to Use SNMP ΓòÉΓòÉΓòÉ
To set up a LAN Distance Connection Server to use SNMP, complete the following
steps:
1. Install OS/2 TCP/IP version 1.2.1 or later.
2. Configure the SNMP agent for OS/2 TCP/IP SNMP. See TCP/IP Version 1.2.1
Installation and Maintenance Guide.
3. Install the LAN Distance Connection Server product.
The SNMP bridge subagent (RLSNMP.EXE) and a text file (RLMIB.TBL)
containing definitions for the variables managed by the SNMP bridge
subagent are installed in the WAL directory.
4. Append the RLMIB.TBL text file to the MIB2.TBL text file in the TCPIP\ETC
directory.
This allows the SNMP agent to resolve the LAN Distance SNMP bridge
subagent variables and handle requests for the LAN Distance bridge.
5. Shut down and restart the LAN Distance Connection Server to make
effective changes to the SNMP bridge subagent files.
ΓòÉΓòÉΓòÉ 17.3.2. Using SNMP to Manage the LAN Distance Bridge ΓòÉΓòÉΓòÉ
To use SNMP to manage the LAN Distance bridge, complete these steps from the
LAN Distance Connection Server:
1. Start the TCP/IP for OS/2 SNMP program to start the SNMP agent
(SNMPD.EXE).
For information on starting the SNMP program, see TCP/IP Version 1.2.1
for OS/2 User's Guide, and the TCP/IP Version 1.2.1 Installation and
Maintenance Guide.
2. Start the LAN Distance subagent (RLSNMP.EXE) from an OS/2 command prompt
by typing:
RLSNMP <host name> <community name>
Specify the host and community names defined for the SNMP program.
For more information about using the SNMP program, see the TCP/IP Version
1.2.1 for OS/2 User's Guide, and the TCP/IP Version 1.2.1 Installation and
Maintenance Guide.
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Table 33. Supported SNMP Variables for the LAN Distance Bridge Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé SUPPORTED SNMP BRIDGE VARIABLES Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé dot1dBaseBridgeAddress Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 1.3.6.1.2.1.17.1.1.0 Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé display Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé dot1dBaseNumPorts Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 1.3.6.1.2.1.17.1.2.0 Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé number Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé dot1dBaseType Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 1.3.6.1.2.1.17.1.3.0 Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé number Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé dot1dBasePort Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 1.3.6.1.2.1.17.1.4.1.1. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé number Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé dot1dBasePortIfIndex Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 1.3.6.1.2.1.17.1.4.1.2. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé number Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé dot1dBasePortCircuit Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 1.3.6.1.2.1.17.1.4.1.3. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé object Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé dot1dBasePortDelayExceededDiscards Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 1.3.6.1.2.1.17.1.4.1.4. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé number Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé dot1dBasePortMtuExceededDiscards Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 1.3.6.1.2.1.17.1.4.1.5. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé counter Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé dot1dSrPort Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 1.3.6.1.2.1.17.3.1.1.1. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé number Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé dot1dSrPortHopCount Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 1.3.6.1.2.1.17.3.1.1.2. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé number Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé dot1dSrPortLocalSeg Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 1.3.6.1.2.1.17.3.1.1.3. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé number Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé dot1dSrPortBridgeNum Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 1.3.6.1.2.1.17.3.1.1.4. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé number Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé dot1dSrPortTargetSeg Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 1.3.6.1.2.1.17.3.1.1.5. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé number Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Table 33. Supported SNMP Variables for the LAN Distance Bridge Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé SUPPORTED SNMP BRIDGE VARIABLES Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé dot1dSrPortLargestFrame Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 1.3.6.1.2.1.17.3.1.1.6. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé number Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé dot1dSrPortSteSpanMode Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 1.3.6.1.2.1.17.3.1.1.7. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé number Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé dot1dSrPortSpecInFrames Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 1.3.6.1.2.1.17.3.1.1.8. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé counter Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé dot1dSrPortSpecOutFrames Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 1.3.6.1.2.1.17.3.1.1.9. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé counter Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé dot1dSrPortApeInFrames Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 1.3.6.1.2.1.17.3.1.1.10. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé counter Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé dot1dSrPortApeOutFrames Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 1.3.6.1.2.1.17.3.1.1.11. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé counter Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé dot1dSrPortSteInFrames Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 1.3.6.1.2.1.17.3.1.1.12. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé counter Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé dot1dSrPortSteOutFrames Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 1.3.6.1.2.1.17.3.1.1.13. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé counter Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé dot1dSrPortSegMismatchDisc Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 1.3.6.1.2.1.17.3.1.1.14. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé counter Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé dot1dSrPortDupSegDisc Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 1.3.6.1.2.1.17.3.1.1.15. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé counter Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé dot1dSrPortHopCtExcDisc Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 1.3.6.1.2.1.17.3.1.1.16. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé counter Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓòÉΓòÉΓòÉ 18. Detecting and Resolving Errors ΓòÉΓòÉΓòÉ
If a problem occurs using the LAN Distance product, problem determination
information is available to help you diagnose and solve the problem. Use
Tracking to either display problem determination information or collect it in a
file.
All of the tracking features described in this chapter are supported for
the LAN Distance Connection Server and the OS/2 LAN Distance Remote
product.
The tracking features supported for the MS Windows LAN Distance Remote
are described in Tracing for MS Windows Remotes and Viewing the Error Log
for MS Windows Workstations.
This chapter describes how to:
Capture workstation configuration information
Trace
Collect dump information
The Tracking notebook has two tabs that are not described in this chapter.
Audit is a system management tool; see Using the Auditing Tool. Retrieve
functions obtain general, trace, dump, and audit information from remote
workstations. See Using the Retrieve Tool.
ΓòÉΓòÉΓòÉ 18.1. Capturing Workstation Configuration Information ΓòÉΓòÉΓòÉ
Select the General tab to gather LAN Distance system configuration information
for a select workstation. Use this information during LAN Distance problem
determination. General information is stored in the general file, named by
you.
You can access the general file for your workstation or a remote LAN Distance
Connection Server. For information about retrieving a general file from a
remote LAN Distance workstation, see Using the Retrieve Tool.
To capture general information for a LAN Distance workstation:
1. Open the LAN Distance Workstations window and select the MyWorkstation
icon for the workstation you want to capture system configuration
information for.
2. From the menu bar, select Selected, Open as, and Tracking.
3. Select the General tab.
The General window displays as shown in Tracking Notebook, General Tab.
Tracking Notebook, General Tab
Use General Window as a guide to capturing general information. Target
workstation is the workstation you are capturing general information for.
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Table 34. General Window Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé FIELDS Γöé ACTIONS & INFORMATION Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé NAME Γöé View the name of the target workstation. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé VERSION Γöé View the version number of the LAN Distance product Γöé
Γöé Γöé installed on the target workstation. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé DATE Γöé View the date when the information on the General window was Γöé
Γöé Γöé initially displayed. Γöé
Γöé Γöé Γöé
Γöé Γöé This date changes when you select the REFRESH push button or Γöé
Γöé Γöé close and reopen the Tracking notebook. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé TIME Γöé View the time when the information on the General window was Γöé
Γöé Γöé initially displayed. Γöé
Γöé Γöé Γöé
Γöé Γöé This time changes when you select the REFRESH push button or Γöé
Γöé Γöé close and reopen the Tracking notebook. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé WORKSTATION Γöé View the LAN Distance workstations to which the user at the Γöé
Γöé AND USER ID Γöé target workstation is logged on. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé MAC ADDRESSES Γöé VIEW THE MAC ADDRESSES THAT ARE AVAILABLE FOR THE TARGET Γöé
Γöé Γöé WORKSTATION. Γöé
Γöé Γöé Γöé
Γöé Γöé The MAC addresses originate from the workstation's Γöé
Γöé Γöé PROTOCOL.INI file. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé FILENAME OF Γöé SPECIFY THE NAME OF THE FILE TO WHICH YOU ARE CAPTURING Γöé
Γöé GENERAL FILE Γöé WORKSTATION INFORMATION. Γöé
Γöé ON XX Γöé Γöé
Γöé Γöé If you are capturing information for your workstation, XX is Γöé
Γöé Γöé "this workstation" If you are capturing information for a Γöé
Γöé Γöé remote LAN Distance Connection Server, XX is the name of the Γöé
Γöé Γöé LAN Distance Connection Server. Γöé
Γöé Γöé Γöé
Γöé Γöé The general file is created on the target workstation. If Γöé
Γöé Γöé you captured information for a remote LAN Distance Con- Γöé
Γöé Γöé nection Server, use the RETRIEVE tab in the Tracking note- Γöé
Γöé Γöé book to access the general file (see Using the Retrieve Γöé
Γöé Γöé Tool). Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé CAPTURE Γöé Select the CAPTURE push button to begin capturing informa- Γöé
Γöé Γöé tion. Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
The General file contains information from many sources. The following
information is displayed in the General window:
CONFIG.SYS file
PROTOCOL.INI file
NETWORK.INI file
WCLLOCAL.INI file
WCLNET.INI file
LANTRAN.LOG file
WCLDIAL.CXD file
In addition, the general file contains information about configured ports and
ARTIC adapters (if applicable).
ΓòÉΓòÉΓòÉ 18.2. Tracing for OS/2 Workstations ΓòÉΓòÉΓòÉ
Select the Trace tab to collect data about internal LAN Distance events.
Collect trace information to assist your designated support organization with
problem determination.
To collect Trace information for a LAN Distance workstation:
1. Open the LAN Distance Workstations window and select the MyWorkstation
icon for the workstation you are collecting trace information for.
2. From the menu bar, select Selected, Open as, and Tracking.
3. Select the Trace tab.
The Trace window displays as shown in Tracking Notebook, Trace Tab.
Tracking Notebook, Trace Tab
Use Trace Window as a guide to capturing trace information. The target
workstation is the workstation you are capturing trace information for.
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Table 35. Trace Window Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé FIELDS Γöé ACTIONS & INFORMATION Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé TRACEPOINT Γöé View the status of the trace points that are defined. Γöé
Γöé NAME AND Γöé Γöé
Γöé STATUS Γöé The STATUS for a trace point can be: Γöé
Γöé Γöé Γöé
Γöé Γöé ON The trace point is active. Γöé
Γöé Γöé BLANK The trace point is inactive. Γöé
Γöé Γöé Γöé
Γöé Γöé To enable tracing, select one or more trace points: Γöé
Γöé Γöé Γöé
Γöé Γöé o Double-click on a trace point to toggle it between ON Γöé
Γöé Γöé and OFF Γöé
Γöé Γöé o Select a trace point and then select the START push Γöé
Γöé Γöé button. (The STOP push button deactivates a trace Γöé
Γöé Γöé point.) Γöé
Γöé Γöé Γöé
Γöé Γöé NOTE: You can select several trace points and select the Γöé
Γöé Γöé START push button to activate many trace points at once. Γöé
Γöé Γöé Γöé
Γöé Γöé Select the STOP ALL push button to stop all trace points. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé BUFFER SIZE Γöé Specify the size of your trace buffer. Γöé
Γöé (*64 K) Γöé Γöé
Γöé Γöé BUFFER SIZE(*64 K) ranges from 1 to 16, where each is a unit Γöé
Γöé Γöé of 64 Kb. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé RECORD TRUN- Γöé Specify the maximum length for your trace records. Γöé
Γöé CATION Γöé Γöé
Γöé Γöé If a trace record exceeds the maximum length specified, it Γöé
Γöé Γöé is truncated. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé WRAP COUNT Γöé Specify a wrap count for the trace buffer. Γöé
Γöé Γöé Γöé
Γöé Γöé The trace buffer wraps when it is full and the oldest data Γöé
Γöé Γöé in the buffer is overwritten. To minimize the amount of Γöé
Γöé Γöé wrapping that occurs, increase BUFFER SIZE or decrease Γöé
Γöé Γöé RECORD TRUNCATION. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé FILENAME OF Γöé Specify the name of the file to which trace information is Γöé
Γöé TRACE FILE ON Γöé copied. Γöé
Γöé XX Γöé Γöé
Γöé Γöé If you are capturing information for your workstation, xx is Γöé
Γöé Γöé THIS WORKSTATION. If you are capturing information for a Γöé
Γöé Γöé remote LAN Distance Connection Server workstation, xx is the Γöé
Γöé Γöé REMOTE WORKSTATION NAME. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé COPY Γöé Select the COPY push button to copy your trace information Γöé
Γöé Γöé to your file. Γöé
Γöé Γöé Γöé
Γöé Γöé If a trace point is ON, you cannot copy information for any Γöé
Γöé Γöé trace point. The trace file is created on the target work- Γöé
Γöé Γöé station. If you are copying information for a remote LAN Γöé
Γöé Γöé Distance Connection Server, use the RETRIEVE tab in the Γöé
Γöé Γöé tracking notebook to access the trace file (see Using the Γöé
Γöé Γöé Retrieve Tool).). Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé START Γöé Select the START push button to activate the selected trace Γöé
Γöé Γöé points. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé STOP Γöé Select the STOP push button to disable the selected trace Γöé
Γöé Γöé points. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé STOP ALL Γöé Select the STOP ALL push button to disable all trace points. Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓòÉΓòÉΓòÉ 18.3. Tracing for MS Windows Remotes ΓòÉΓòÉΓòÉ
Open the Tracking window to collect data about internal LAN Distance events.
Collect trace information to assist your designated support organization with
problem determination.
To collect Trace information for a MS Windows LAN Distance workstation, open
the Tracking window:
1. From the LAN Distance Workstations window, select the MyWorkstation icon
for the workstation you are collecting trace information for.
2. From the LAN Distance group window, double-click on the Tracking icon.
The Tracking window displays as shown in Tracking Window for MS Windows.
Tracking Window for MS Windows
Use Tracking Window as a guide to capturing trace information. The target
workstation is the workstation you are capturing trace information for.
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Table 36. Tracking Window Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé FIELDS Γöé ACTIONS & INFORMATION Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé TRACE POINTS Γöé View the status of the trace points that are defined. Γöé
Γöé AND STATUS Γöé Γöé
Γöé Γöé The STATUS for a trace point can be: Γöé
Γöé Γöé Γöé
Γöé Γöé ON The trace point is active. Γöé
Γöé Γöé BLANK The trace point is inactive. Γöé
Γöé Γöé Γöé
Γöé Γöé To enable tracing, select one or more trace points: Γöé
Γöé Γöé Γöé
Γöé Γöé o Double-click on a trace point to toggle it between ON Γöé
Γöé Γöé and OFF Γöé
Γöé Γöé o Select a trace point and then select the START push Γöé
Γöé Γöé button. (The STOP push button deactivates a trace Γöé
Γöé Γöé point.) Γöé
Γöé Γöé Γöé
Γöé Γöé NOTE: You can select several trace points and select the Γöé
Γöé Γöé START push button to activate many trace points at once. Γöé
Γöé Γöé Γöé
Γöé Γöé Select the STOP ALL push button to stop all trace points. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé FILE WRAP SIZEΓöé Specify the size of your trace file. Γöé
Γöé (*1k) Γöé Γöé
Γöé Γöé FILE WRAP SIZE(*1k) ranges from 1 to 810, where each is a Γöé
Γöé Γöé unit of 1 Kb. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé RECORD TRUN- Γöé Specify the maximum length for your trace records. Γöé
Γöé CATION Γöé Γöé
Γöé Γöé If a trace record exceeds the maximum length specified, it Γöé
Γöé Γöé is truncated. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé WRAP COUNT Γöé Specify a wrap count for the trace file. Γöé
Γöé Γöé Γöé
Γöé Γöé The trace file wraps when it is full and the oldest data in Γöé
Γöé Γöé the file is overwritten. To minimize the amount of wrapping Γöé
Γöé Γöé that occurs, increase FILE WRAP SIZE or decrease RECORD Γöé
Γöé Γöé TRUNCATION. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé TRACE Γöé Specify the name of the file to which trace information is Γöé
Γöé FILENAME Γöé copied. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé START Γöé Select the START push button to activate the selected trace Γöé
Γöé Γöé points. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé STOP Γöé Select the STOP push button to disable the selected trace Γöé
Γöé Γöé points. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé START ALL Γöé Select the START ALL push button to activate all trace Γöé
Γöé Γöé points. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé STOP ALL Γöé Select the STOP ALL push button to disable all trace points. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé VIEW Γöé Select the VIEW push button to view the collected tracing Γöé
Γöé Γöé information. Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓòÉΓòÉΓòÉ 18.4. Dumping Information to a File ΓòÉΓòÉΓòÉ
The Dump tab contains all of the control information for capturing Dump data to
a file. You can select a dump point and a file name, capturing all of the dump
information into that file. Collect dump information to send to your designated
support organization. The dump information is stored in the dump file, which
is named by an authorized user. The dump file can be accessed locally or
remotely. For more information about retrieving a dump file from a remotely
managed LAN Distance workstation, see Using the Retrieve Tool.
To capture dump information about a LAN Distance workstation:
1. Open the LAN Distance Workstations window and select the MyWorkstation
icon for the workstation you are collecting dump information for.
2. From the menu bar, select Selected, Open as, and Tracking.
3. Select the Dump tab (Tracking Notebook, Dump Tab)
4. In the Dump points field, select a dump point for which you want to
capture information.
5. In the Filename of Dump file on xx field, enter the file name where you
want to capture the workstation information. The xx displays this
workstation or the remote workstation name depending on the location of
the target workstation.
6. To store the dump information to the file specified in Filename of Dump
file on xx, select the Dump push button.
The dump file is created on the target workstation. If the target
workstation is remotely managed, use the Retrieve tab to access the dump
file. For more information about Retrieve, see Using the Retrieve Tool.
Tracking Notebook, Dump Tab
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Table 37. Dump Window Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé FIELDS Γöé ACTIONS & INFORMATION Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé DUMP POINTS Γöé Specify the Dump points to use. Γöé
Γöé Γöé Γöé
Γöé Γöé The DUMP POINTS field displays all of the defined dump Γöé
Γöé Γöé points. Next to each dump point in the list is a corre- Γöé
Γöé Γöé sponding product name. You can activate one dump point at a Γöé
Γöé Γöé time. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé FILENAME OF Γöé Specify the name of the file to which Dump information is Γöé
Γöé DUMP FILE ON Γöé copied. Γöé
Γöé XX Γöé Γöé
Γöé Γöé In the FILENAME OF DUMP FILE ON XX field, enter the name of Γöé
Γöé Γöé the file into which you want the dump data to be captured. Γöé
Γöé Γöé The xx displays THIS WORKSTATION or the REMOTE WORKSTATION Γöé
Γöé Γöé NAME depending on the location of the target workstation. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé DUMP Γöé Select the Dump push button to capture the information to Γöé
Γöé Γöé the file name that you specified in the FILENAME OF DUMP Γöé
Γöé Γöé FILE ON XX field. Γöé
Γöé Γöé Γöé
Γöé Γöé Capturing the dump information stores this file at the Γöé
Γöé Γöé target workstation. For more information about remotely Γöé
Γöé Γöé retrieving tracking information from a target workstation, Γöé
Γöé Γöé see Using the Retrieve Tool. Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓòÉΓòÉΓòÉ 18.5. Viewing Error Messages ΓòÉΓòÉΓòÉ
The message log receives and displays error and warning indications for the LAN
Distance product. Use the message log to monitor the performance of a LAN
Distance workstation. The message log file can be accessed using FFST/2's
message log facility, MSGLOGF.EXE. To invoke MSGLOGF.EXE:
1. Open the LAN Distance Workstations window, select the MyWorkstation icon.
2. From the menu bar, select Selected, Open as, and Message log.
Note:
1. You can also access the message log by entering MSGLOGF WCL.DAT on an
OS/2 command line from the \WAL directory.
2. When no message log (WCL.DAT) exists, an error message is displayed.
ΓòÉΓòÉΓòÉ 18.6. Error Reports ΓòÉΓòÉΓòÉ
LAN Distance administrators also can use error reports for LAN Distance
Connection Servers that are active. Error reports inform the LAN Distance
administrator that a problem that exists on a LAN Distance Connection Server.
Unlike error messages, error reports automatically display error information
about a LAN Distance Connection Server to all users with administrator
privileges who are logged on to the LAN Distance Connection Server using the
LAN Distance product. Error reports appear as pop-up windows and are logged in
the LAN Distance administrator's message log.
ΓòÉΓòÉΓòÉ 18.6.1. Using Pop-Up Windows ΓòÉΓòÉΓòÉ
Pop-up windows can contain warnings, error indications, and informational
messages. When a pop-up window is displayed, select a push button to
acknowledge the message, and possibly indicate an action you can take. If you
want pop-up windows to be displayed:
1. Select the Workstation tab in the Settings notebook.
2. Select Display LAN Distance messages.
Note: Do not select pop-up window message display for an unattended LAN
Distance Remote. When a message requires a user response, an unattended LAN
Distance Connection Server could interrupt the function of a LAN Distance
Remote.
ΓòÉΓòÉΓòÉ 18.7. Viewing the Error Log ΓòÉΓòÉΓòÉ
The error log receives and displays indications of errors that occur during a
LAN Distance workstation's operation. These errors are unique to LAN Distance
and can be used by designated support organization to fix a LAN Distance
product problem. The error log includes error-specific data that can be used
to isolate and identify the exact nature of the problem.
To view the error log:
1. From the LAN Distance Workstations window, select the MyWorkstation icon.
2. From the menu bar, select Selected, Open as, and Error log.
Note: You can also view the error log by entering SYSLOG on an OS/2 command
line.
ΓòÉΓòÉΓòÉ 18.8. Viewing the Error Log for MS Windows Workstations ΓòÉΓòÉΓòÉ
The error log receives and displays indications of errors that occur during a
LAN Distance workstation's operation. These errors are unique to LAN Distance
and can be used by designated support organization to fix a LAN Distance
product problem. The error log includes error-specific data that can be used
to isolate and identify the exact nature of the problem. To view the error
log:
1. Open the Tracking window as described in Tracing for MS Windows Remotes.
2. Select the View push button to view any errors logged by LAN Distance.
Note: You do not have to activate any trace points to have LAN Distance
errors logged in the trace file.
ΓòÉΓòÉΓòÉ 18.9. Viewing Alerts ΓòÉΓòÉΓòÉ
Alerts are pre-defined, expedited messages on the LAN, reporting an event that
requires operator intervention or attention. Alerts can be sent to a central
LAN management point. The LAN Distance product uses alerts to report various
types of communications errors for ISDN, asynchronous, and synchronous
connections.
Every alert generated by the LAN Distance product is copied to a dump file, and
is logged separately from error logs. You can view alerts through FFST/2's
dump formatter. To use the dump formatter, enter EPWDF on an OS/2 command
line. You can specify configuration information to control the way that alerts
are displayed by the dump formatter. For more information about routing alerts
and the dump formatter, refer to the FFST/2 Administrative Guide.
The LAN Distance product also generates internal alerts called error reports.
Error reports allow a LAN Distance Connection Server to report an error to the
LAN Distance administrator regardless of where the administrator is logged on.
For more information about error reports, see Error Reports.
ΓòÉΓòÉΓòÉ 19. Supported Hardware ΓòÉΓòÉΓòÉ
This appendix lists the hardware supported by this release of the LAN Distance
product. See the README file for a list of any modems, WAN adapters, and LAN
adapters that were added after this book was published.
Changes or additions made to the list of supported hardware after the product
shipped are documented in the MODEMS.TXT and the ADAPTERS.TXT files which are
available from these sources:
CompuServe users can access the IBM PSPAPROD forum and access these files
in the LAN Distance product's library section.
Users with access to IBMLink through OS2BBS can access these files in the
REMOTE section of the OS/2 Software Library (3), OS/2 Selective Fixes
(1).
ΓòÉΓòÉΓòÉ 19.1. Modems ΓòÉΓòÉΓòÉ
Modems used by the LAN Distance product must be homologated in the country of
use. The LAN Distance product does not provide DTE support for country-specific
homologation requirements.
The minimum baud rate of a modem used by LAN Distance is 9600.
Modems Supported by the LAN Distance Product lists the LAN Distance generic
modems, IBM modems, and other manufacturer's modems listed for the LAN Distance
product when this book was published.
Note: Two dialog descriptor files (.DDF) are included to support leased line
enhancements for the ASYNCLL.PIF and SYNCLL.PIF files. These two files,
NODIALOG.DDF and NODIAL2.DDF are designed to replace files of the same name.
These files must be used if the ASYNCLL.PIF or SYNCLL.PIF files included in
this package are used.
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Table 38. Modems Supported by the LAN Distance Product Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé MODEMS Γöé PIF FILE NAME Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé LAN DISTANCE GENERIC MODEMS Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Any Modem Not In This List Γöé NOTLIST.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Asynchronous Switched Connection Modem Γöé ASYNCSW.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Asynchronous Leased Line Modem Γöé ASYNCLL.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Generic Mwave Modem Γöé MWAVE.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Null Modem Γöé NULMODEM.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Synchronous Switched Connection Modem Γöé SYNCSW.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Synchronous Leased Line Modem Γöé SYNCLL.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Switched 56 V.35 Modem Γöé SWITCH56.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé SYNCHRONOUS MODEMS (SWITCHED 56) Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Northern Telecom Meridian Datapath V.35 Modem Γöé MERIDIAN.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Motorola UDS** DSU170 V.35 Synchronous Modem Γöé UDSDU170.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé DIGITAL SWITCHING ADAPTER Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé IBM MWave Windsurfer 14400 Modem Γöé WINDSURF.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé PCMCIA MODEMS Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Apex PCMCIA** Fax/Modem IBP - 1414 Γöé APEXPCM.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé AT&T KeepInTouch PCMCIA Modem Γöé ATTPCMC.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Banksia PCMCIA Data/Fax Modem Γöé BANKSIAP.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé BocaModem 14.4bps V.32bis PCMCIA Modem Γöé BOCAPCM.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Hayes Optima 144 PCMCIA Modem Γöé OPTIMAP.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé IBM PCMCIA Data/Fax Modem Γöé IBMPCMCI.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé IBM Microelectronics 14.4/14.4 Data/Fax Modem Γöé IBMTORON.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Megahertz** C5144 Data/Fax Modem Γöé MHC5144.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Megahertz XJ1144FM PCMCIA Data/Fax Modem Γöé MH144PCM.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Megahertz XJ196FM PCMCIA Data/Fax Modem Γöé MH96PCM.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Motorola CELLect 14.4 PCMCIA Modem Γöé MOTOCELL.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé INTERNAL MODEMS Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Apex Freedom 14/96 Data/Fax Laptop Modem Γöé APEX1496.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé BocaModem 14.4 V.32bis Internal Modem Γöé BOCA144I.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Data Race** RediCard** Internal Modem Γöé DRREDIMI.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Data Race Thinkpad Internal Modem Γöé DRTURBO.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé IBM ASYNC/SDLC V.32 Modem/A Γöé IBMV32A.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé IBM High Speed Internal Data/Fax Modem Γöé IBMHSINT.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé IBM PS/2 14.4 Data/Fax Modem Adapter/A Γöé IBM144.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Infotel 1414VOE V.32bis/V.32 FAX Modem Γöé INFOTL14.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Intel SatisFAXtion Modem/400e Γöé INTFAX4E.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Practical Peripherals FX PS/2 Internal Modem Γöé PPFXPS2.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Practical Peripherals PM 14400FX Internal Modem Γöé PPPM144.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé ZOOM EVFPV32bis Internal Modem Γöé ZMPV32BI.PIF Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Table 38. Modems Supported by the LAN Distance Product Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé MODEMS Γöé PIF FILE NAME Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé ZOOM EVFXV32 Internal Modem Γöé ZMFXV32I.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé EXTERNAL MODEMS Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Angia 14.4 Data/Fax Modem Γöé ANGIA144.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Apex Freedom 14/96 Dat/Fax Laptop Modem Γöé APEX1496.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé AT&T Comsphere 3820 Γöé ATT3820.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé AT&T DataPort Γöé ATTDP.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Banksia MyFastModem 28800 Γöé MYFMODEM.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Banksia MyModem 14400 Γöé MYMODEM.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé BocaModem 14.4 V.32bis External Modem Γöé BOCA144E.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé BocaModem 14.4 V.32bis Internal Modem Γöé BOCA144I.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé BocaModem V.FAST Externa. Modem Γöé BOCAFAST.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Complete PC 14400 TurboModem Γöé COMPLETE.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Creatix LX 144 VF High Speed Modem Γöé LC144VF.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Digicom Eagle Plus V.32 Γöé EAGLEP.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé GVC FM-144V External Fax Modem Γöé GVCFM144.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé GVC SM-96 External Modem Γöé GVCSM96.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Haeussler Dat/Fax Modem H-144 Γöé HAEUSS.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Hayes ACCURA** 144 + FAX144 Modem Γöé ACCURA14.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Hayes ACCURA 288 V.FC + FAX Modem Γöé ACCURA28.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Hayes ACCURA 96 + FAX96 Modem Γöé ACCURA96.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Hayes Optima 14400 Modem Γöé OPTIMA14.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Hayes Optima 9600 Modem Γöé OPTIMA96.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Hayes Optima 28800 Modem Γöé OPTIMA28.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Hayes Ultra** 14400 Modem Γöé ULTRA144.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Hayes Ultra 9600 Modem Γöé ULTRA96.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé IBM 7851 14.4Kbps Data/Fax Modem Γöé IBM7851.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé IBM 7855 Modem (stand-alone and rack-mount models) Γöé IBM7855.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé IBM Mwave Waverunner Digital Modem Γöé WAVERUNR.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Intel** 14.4EX Modem Γöé INT144EX.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Intel PCFM7600 14.4/14.4 External Modem Γöé INPCFM76.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Intel SatisFAXtion** Modem/400 Γöé INTFAX4.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Macronix Fax/Modem Γöé MACRONIX.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Microcom** DeskPorte FAST** Modem Γöé MICVFAST.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Microcom HDFast Modem Γöé HDFAST.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Microcom High Density 4232bis Modem Γöé MICROHDM.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Microcom MicroPorte** 4232bis Portable Modem Γöé MICROPRT.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Microcom QX/4232bis** Modem Γöé MICROCOM.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Motorola Codex 3220 Plus Γöé CODX3220.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Motorola Codex 3260 Modem Γöé CODX3260.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Motorola Codex 3261 Fast Γöé CODX326X.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Motorola UDS FasTalk 32bx** Modem Γöé FASTALK.PIF Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Table 38. Modems Supported by the LAN Distance Product Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé MODEMS Γöé PIF FILE NAME Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Motorola UDS V.3229 Modem Γöé UDSV3229.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Multitech** 1432 Modem Γöé MT1432.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Multitech 1432MU Modem Γöé MT1432MU.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Multitech 932 Modem Γöé MT932.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé NEC 19632E Intelligent Modem Γöé NEC19632.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Practical Peripherals FXMT Modem Γöé PPFXMT.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Practical Peripherals FXSA Modem Γöé PPFXSA.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Practical Peripherals PM 14400FX PKT Modem Γöé PPPM144P.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Racal-Datacom** ALM3223 Modem Γöé ALM3223.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Racal-Datacom ALM3226 V.32bis Modem Γöé ALM3226.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Rolm** 244PC Telephone Γöé ROLM244.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé SupraFAX** V.32bis Modem Γöé SUPRAFAX.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Telebit** T1600 Modem Γöé TBT1600.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Telebit T2500 Modem Γöé TBT2500.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Telebit T3000 Modem Γöé TBT3000.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Telebit Trailblazer** Plus Modem Γöé TELEBIT.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Telebit WorldBlazer Modem Γöé WLDBLAZE.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé USRobotics Courier Dual Standard V.FC Γöé USRCDS28.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé USRobotics Courier HST DS** Γöé USRHSTDS.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé USRobotics Courier HST DS 28800 Γöé USRCOU28.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé USRobotics Sportster 14400** Modem Γöé USRSPORT.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé USRobotics Sportster 28800 Modem Γöé USRSP288.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé USRobotics WorldPort 14400** Modem Γöé USRWPORT.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé USRobotics WorldPort 9600 Modem Γöé USRWPRT9.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé ViVa 14.4/FAX Modem Γöé VIVA144.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Zenith Data Systems 2000 Laptop Modem Γöé ZEN2000.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé ZOOM EVFPV32bis Modem Γöé ZMFPV32B.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé ZOOM EVFXV32 Modem Γöé ZMFXV32.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé ZOOM V.32bis High Speed External Modem Γöé ZOOMV32B.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé ZyXEL U-1496 Modem Γöé ZYXEL.PIF Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓòÉΓòÉΓòÉ 19.2. Null Modem Cables ΓòÉΓòÉΓòÉ
If your workstation uses a null modem, make sure the cable is wired as:
(FG) 1----------------------1 (FG) Pin 1 straight through
(TD) 2----------------------3 (RD) Pin 2 and 3 are crossed
(RD) 3----------------------2 (TD)
(RTS) 4----------------------5 (CTS) Pin 4 and 5 are crossed
(CTS) 5----------------------4 (RTS)
(SG) 7----------------------7 (SG) Pin 7 straight through
(DSR) +--6 6---+ (DSR) Pin 6 and 8 together to
| | Pin 20 of the other side
(CD) +--8----------------------20 | (DTR)
|
(DTR) 20-----------------------8---+ (CD)
ΓòÉΓòÉΓòÉ 19.3. Wide Area Network Adapters ΓòÉΓòÉΓòÉ
A list of Wide Area Network adapters supported by the LAN Distance product are
available from the World Wide Web at:
http:\\www.austin.ibm.com\pspinfo\ldwan.htm
ΓòÉΓòÉΓòÉ 19.4. Local Area Network Adapters ΓòÉΓòÉΓòÉ
A list of Local Area Network adapters supported by the LAN Distance product are
available from the World Wide Web at:
http:\\www.austin.ibm.com\pspinfo\ldlan.htm
ΓòÉΓòÉΓòÉ 19.5. Setting Up LAN Adapters to Use the LAN Distance Product ΓòÉΓòÉΓòÉ
The LAN adapters supported by the LAN Distance product are listed in Local Area
Network Adapters Supported by the LAN Distance Product. Before you can set up
your supported LAN adapter to use the LAN Distance product, its adapter
driver(s) must be installed through LAPS after you install the LAN Distance
Connection Server product.
If the workstation on the LAN that you plan to use as the LAN Distance
Connection Server already has a LAN adapter configured, the adapter
driver(s) for the LAN adapter are already installed. Complete the steps
listed in Setting Up a LAN Adapter Through the Settings Notebook.
If the LAN workstation that you plan to use as the LAN Distance
Connection Server does not yet have a supported LAN adapter configured,
the adapter drivers for the LAN adapter are not installed. Complete
steps in Installing LAN Adapter Drivers Through LAPS, before completing
steps listed in Setting Up a LAN Adapter Through the Settings Notebook.
ΓòÉΓòÉΓòÉ 19.6. Setting Up a LAN Adapter Through the Settings Notebook ΓòÉΓòÉΓòÉ
If your supported LAN adapter is already configured for your LAN, complete
these steps to set up your adapter after installing the LAN Distance Connection
Server product:
1. Open the Settings notebook and select the Address/LAN tab.
2. From the Adapter for bridging list, use the scroll bars to select your
LAN adapter.
Note: If your LAN adapter is not displayed, close the Settings notebook
and do not save your configuration changes. You must complete steps
listed in Installing LAN Adapter Drivers Through LAPS before you can set
up your LAN adapter through the Settings notebook.
3. Close the Address/LAN tab. From the Settings notebook, complete any
additional configuration required for your LAN Distance Connection
Server, then close the Settings notebook.
4. Stop the LAN Distance Connection Server product, shut down and restart
your workstation.
ΓòÉΓòÉΓòÉ 19.6.1. Installing LAN Adapter Drivers Through LAPS ΓòÉΓòÉΓòÉ
To install the required adapter drivers for your LAN adapter, you need the
option diskette for your adapter. You may also need to refer to the adapter
documentation that describes how to install your LAN adapter drivers through
LAPS.
After you install the LAN Distance Connection Server product, complete these
steps to install the LAN adapter drivers for your LAN adapter:
1. From an OS/2 command prompt, go to the IBMCOM directory, and type LAPS or
MPTS to start the LAPS program.
2. Insert the adapter option diskette in the diskette drive.
3. From the logo window (LAPS Logo Window), select the Install push button
to copy the files needed to support your LAN adapter.
LAPS Logo Window
4. From the Install Additional Network Drivers pop-up window (Install
Additional Network Drivers), type the fully qualified path (drive and
directory) to your LAN adapter drivers.
Select the OK push button to return to the LAPS Logo window, and then
select the Exit push button to save your changes and exit LAPS.
5. If the LAN adapter driver you first installed is not on the list of
supported adapters but is plug-compatable with a supported adapter, you
need to add the name of the Network Information File (NIF) to the LAN
Distance configuration. To add the NIF file name:
a) Edit the \WAL\WCLLOCAL.INI file.
b) Locate the [TOKENRINGMACS] and [ETHERNETMACS] sections in the INI
file.
c) Add the name of your drivers NIF file to the appropriate Token-Ring
or Ethernet section. For example, if the adapter you just added is
an Ethernet driver and the NIF file for the driver is named
ENETXMP.NIF, add the NIF file name to the [ETHERNETMACS] section.
d) Save the updated \WAL\WCLLOCAL.INI file.
Install Additional Network Drivers
6. Start the LAN Distance product and then complete the steps listed in
Setting Up a LAN Adapter Through the Settings Notebook.
ΓòÉΓòÉΓòÉ 19.6.2. Modifying Parameters for a LAN Adapter Through LAPS ΓòÉΓòÉΓòÉ
If your LAN adapter supports configuration through LAPS, you can modify
configuration parameters such as interrupts, base address and shared RAM,
through LAPS. For additional information, refer to your adapter documentation.
1. Start the LAPS program and select Configure from the LAPS logo window to
open the Configure Workstation window.
2. From the Configure Workstation window (Configure Workstation Window),
select your LAN adapter from the Current Configuration list box.
Configure Workstation Window
3. Select the Edit push button to modify the parameters for your LAN adapter
(Parameters for IBM LAN Adapter for LAN). When you have completed
modifying the parameters, select the OK push button to save your changes
and return to the Configure Workstation window.
Parameters for IBM LAN Adapter for LAN
(IBMENI.OS2)
4. From the Configure Workstation window, select OK and exit LAPS.
ΓòÉΓòÉΓòÉ 19.7. Performance Tuning for Non-FIFO Workstations ΓòÉΓòÉΓòÉ
The OS/2 LAN Distance products supports FIFO and non-FIFO serial communications
(COM) ports. If you install the LAN Distance product on a workstation that
does not have FIFO buffering, you may receive message WCL0223 when you start
your workstation.
ΓòÉΓòÉΓòÉ 19.7.1. Determining If Your Workstation Is Non-FIFO ΓòÉΓòÉΓòÉ
To see if you have a FIFO or non-FIFO workstation, complete these steps:
1. At the OS/2 command prompt, enter:
MODE COM1
2. If the system response is BUFFER = N/A, you have a non-FIFO machine.
3. If the system response is BUFFER = AUTO or anything other than BUFFER =
N/A, then you have a FIFO workstation.
ΓòÉΓòÉΓòÉ 19.7.2. Performance Tuning Steps for Non-FIFO Workstations ΓòÉΓòÉΓòÉ
Non-FIFO workstations generally do not support connection speeds greater than
9600 bps, regardless of the connection speed supported by the attached modem.
You can try to increase your LAN Distance connection speed by completing the
steps that follow if 1) your non-FIFO workstation has a processing speed of 25
Mhz or greater and 2) the modem attached to the COM port supports transmission
speeds greater than 9600 bps.
1. Stop the LAN Distance product.
2. Open the WCLNET.INI file in the WAL directory and locate the
SerialPortSpeed value.
3. Using any text editor, try increasing this value as follows:
9600 to 14400(**)
14400 to 19200
19200 to 38400
4. Close the WCLNET.INI file and save your changes.
Note: If you later change port and modem assignments through the
Settings notebook, the WCLNET.INI file is recreated and changes made to
the SerialPortSpeed parameter are not saved.
5. Start the LAN Distance product.
If you can establish a LAN Distance connection and access LAN resources, you
have successfully increased the connection speed for your non-FIFO COM port.
Errors indicating that the serial port speed value is too large include
messages WCL0221, WCL0336, and spontaneous disconnects. If you experience
these errors, reduce the value of the SerialPortSpeed in the WCLNET.INI file
to 9600.
ΓòÉΓòÉΓòÉ 19.8. Modems Requiring External Configuration ΓòÉΓòÉΓòÉ
The LAN Distance product supplies .PIF files for each of the modems supported
by the LAN Distance product. The .PIF file for your modem is configured when
you select your supported modem from the Available modem types list box on the
Modems tab in the Settings notebook.
Most modems can be configured to work with the LAN Distance product simply by
selecting the supported modem from the Available modem types list box. However
some modems, such as the IBM 7855 modem, also require external configuration,
as described in the following topic.
ΓòÉΓòÉΓòÉ 19.8.1. External Configuration for the IBM 7855 Modem ΓòÉΓòÉΓòÉ
After you configure the IBM7855 modem through the Settings notebook, external
configuration is required to use the IBM7855 modem with the LAN Distance
product.
Configure the IBM7855 modem through the front panel of the modem, or use an
application such as the IBM7855 configuration tool. You can obtain the IBM7855
tool from these sources:
CompuServe users can access the IBM PSPAPROD forum, go to the library
section for the LAN Distance product, and download the IBM7855 tool and
user documentation.
Users with access to IBMLink through OS2BBS can access the IBM7855 tool
and user documentation from the REMOTE section of the OS/2 Software
Library (3), OS/2 Selective Fixes (1).
External Settings for the IBM7855 Modem describes the options you must set for
the front panel controls to externally configure your modem the LAN Distance
product. For reference, the extended AT commands for these options are also
provided.
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Table 39. External Settings for the IBM7855 Modem Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé FRONT PANEL Γöé SELECTED OPTION DESCRIPTION Γöé AT COMMANDS Γöé
Γöé CONTROL Γöé Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Operating Mode Γöé Idle and connect async Γöé &M Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Command Set Γöé AT commands Γöé %L Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Network Γöé &L Γöé Public Switched Γöé
Γöé Γöé Γöé Network (PSTN) Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé PSN Speed Γöé 12000 bps Γöé &AP Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé RLSD Control Γöé RLSD is ON only during a connection Γöé &C Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé RFS Control Γöé RFS follows V.25bis rules Γöé &R Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé DSR Control Γöé DSR follows DTR Γöé &S Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé DTR Control Γöé DTR drop ends PSN connection Γöé &D Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé ECL Start Γöé Accept ECL link request Γöé /N Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Compression Γöé Data compression enabled Γöé %C Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé DTE Interface Γöé Speed buffering disabled Γöé /M Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé DTE Flow Control Γöé DTE uses RTS flow control Γöé /Q Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Modem Flow Γöé Modem uses RFS flow control Γöé /R Γöé
Γöé Control Γöé Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Call Progress Γöé Enable BUSY and DIALTONE detect Γöé X Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Handshake Timer Γöé 60 seconds Γöé S7 Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Character Format Γöé 8N1 Γöé &B Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Message Γöé Messages enabled Γöé Q Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Result Codes Γöé Messages are verbose Γöé V Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Character Echo Γöé Async character echo enabled Γöé E Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé ECL clocked size Γöé 64 Γöé /A Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Autoanswer Γöé 2 rings Γöé SO Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Retrain Control Γöé Short retrains Γöé %E Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Fall Back Γöé Fall back 1 rate Γöé %F Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Fall Forward Γöé Fall forward disabled Γöé %G Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Speaker Volume Γöé Loud volume Γöé L Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Speaker Control Γöé Speaker ON until carrier detect Γöé M Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Message Display Γöé Compact messages Γöé %V Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓòÉΓòÉΓòÉ 20. Command Line Interface Reference ΓòÉΓòÉΓòÉ
This appendix describes the commands you enter at the OS/2 command prompt to
perform LAN Distance functions.
ΓòÉΓòÉΓòÉ 20.1. Getting Help ΓòÉΓòÉΓòÉ
At the OS/2 command prompt, enter LDIST HELP for help with the syntax of LDIST
commands.
ΓòÉΓòÉΓòÉ 20.2. Command Syntax ΓòÉΓòÉΓòÉ
The commands in this appendix are described with syntax diagrams.
The following will help you use the syntax diagrams to enter commands:
Read the syntax diagram from left to right and top to bottom.
The command name and required parameters are displayed on the baseline:
>>ΓöÇΓöÇCOMMAND NAMEΓöÇΓöÇrequired parameterΓöÇΓöÇ><
Optional parameters are displayed below the baseline:
>>ΓöÇΓöÇCOMMAND NAMEΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇ><
ΓööΓöÇoptional parameterΓöÇΓöÿ
When you can choose from two or more parameters, the values are displayed
in a vertical stack.
When a parameter is required, one value in the stack is displayed on the
baseline:
>>ΓöÇΓöÇCOMMAND NAMEΓöÇΓöÇΓö¼ΓöÇrequired choice 1ΓöÇΓö¼ΓöÇΓöÇ><
ΓööΓöÇrequired choice 2ΓöÇΓöÿ
When a parameter is optional, the entire stack of values is displayed
below the baseline:
>>ΓöÇΓöÇCOMMAND NAMEΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇ><
Γö£ΓöÇoptional choice 1ΓöÇΓöñ
ΓööΓöÇoptional choice 2ΓöÇΓöÿ
ΓòÉΓòÉΓòÉ 20.3. Command Conventions ΓòÉΓòÉΓòÉ
This appendix uses the following conventions to describe commands in the syntax
diagrams and examples.
UPPERCASE
Uppercase bold letters indicate commands and keyword parameters. You
can enter command and keyword parameters in uppercase (LDIST DIAL),
lowercase (ldist dial), or mixed-case letters.
italics
Lowercase italics indicate variable parameters that you must replace
with a value. For example, replace userid with your user ID.
/PARAMETER: variable
When a parameter has two parts, a parameter name and a variable, use
a colon (:) to separate the parameter name from the variable.
When your variable parameters include spaces, place double quotation
marks before and after the string of characters. For example, enter
/PASSPHRASE:"The rain in Spain".
ΓòÉΓòÉΓòÉ 20.4. Creating Command Files ΓòÉΓòÉΓòÉ
Create a command (.CMD) file with LAN Distance commands to simplify routine
dialing tasks.
The following sample REXX command file uses LDIST commands to dial a
workstation. If the connection to the workstation is successful, the command
file then uses IBM LAN Requester commands to log on and access file resources.
Sample REXX Procedure for Dialing
/****************************************************************************/
/* This program will start the LAN Distance product, dial a phone book */
/* entry called MYSRVR, log onto the LAN Distance Connection Server */
/* (providing a passphrase), log the user onto the LAN server, and access */
/* two network drives. Optionally, if the user starts this program */
/* specifying a /p (or /P) parameter, the user will be prompted for the */
/* phone number, user ID, and passphrase to be used for this execution */
/* of the program. Also, help is provided if ? is specified when starting */
/****************************************************************************/
arg provide
'echo off'
if provide = '?' then do
say 'This program will start LAN Distance, dial a number from your'
say 'phone book, log your ID onto the LAN Distance server, log an ID onto'
say 'the LAN server, and attach network drives. If you wish to provide'
say 'a number to dial, and a user ID/passphrase at the time you execute'
say 'this program, start this program using the /p option. (i.e. DIALSRV /p)'
say ' '
say ' '
say 'To execute the program now, with prompts for number to call, user ID'
say 'and passphrase, enter the letter p now. To end the program now, just'
say 'press Enter...'
pull gonogo
if gonogo <> 'P' then
signal END_NOW
provide = '/P'
end
/***************************************************************************/
/* First, start LAN Distance */
/***************************************************************************/
say 'Starting LAN Distance...'
'ldstart'
/***************************************************************************/
/* Next, call the Phonebook entry named MYSRVR, and log on user REMOTE1, */
/* providing the passphrase, which in this case is 'password'. */
/***************************************************************************/
if provide = ' ' then do
say 'Calling the LAN Distance Connection Server...'
'ldist dial /D:MYSRVR /U:REMOTE1 /P:password'
end
/**************************************************************************/
/* If running in 'Prompt' mode, get required number, User ID and password */
/**************************************************************************/
if provide = '/P' then do
say 'Enter the number you want to dial:'
pull newnum
say ' '
say ' '
say 'Enter your User ID for signing onto the LAN Distance server:'
pull userid
say ' '
say ' '
say 'Enter your passphrase, if this User ID requires a passphrase:'
say '(Remember, your passphrase is case sensitive.)'
parse pull password
say 'Calling the LAN Distance Connection Server...'
'ldist dial /D:"DIAL LOCATION" /N:'||newnum' /U:'||userid' /P:'||password
end
/***************************************************************************/
/* Now, log onto the LAN server domain TESTDOM, as user BJONES */
/***************************************************************************/
'logon bjones /D:testdom'
/***************************************************************************/
/* And attach a couple of aliases as drives M: and X: Of course, these */
/* drives can be changed to whatever the user wishes to access during the */
/* execution of this program, or can be deleted or replaced with other */
/* operations the user wishes to perform. */
/***************************************************************************/
'net use m: testfile'
'net use x: tools'
/***************************************************************************/
/* End of procedure */
/***************************************************************************/
END_NOW:
'echo on'
say ' '
say ' '
say ' '
say 'Finished!'
exit
This sample REXX command file releases use of the file resources, and stops the
LAN Distance connection.
Sample REXX Procedure to Hang Up
/***************************************************************************/
/* This program will reverse the process initiated by DIALSRV.CMD. That */
/* is, it will drop the network drives M: and X: (which were attached */
/* during DIALSRV), and log the user off the LAN server. It will then */
/* (optionally) stop LAN Distance, hanging up all active calls. */
/* Help is provided if ? is the load-time option. */
/***************************************************************************/
arg provide
'echo off'
if provide = '?' then do
say 'This program will drop the connection to the network drives M: and X:'
say 'which were attached by the program DIALSRV. Then this program will '
say 'log the user off from the LAN Server, then (optionally) will stop '
say 'LAN Distance, hanging up the active call to the LAN Distance Connection'
say 'server.'
say ' '
say ' '
say 'To execute this program now, enter the letter p. To exit this '
say 'program now, just press Enter...'
pull gonogo
if gonogo <> 'P' then
signal END_NOW
provide = '/P'
end
/***************************************************************************/
/* First, drop use of the network drives M: and X: */
/***************************************************************************/
say 'Dropping use of network drives...'
'net use m: /d'
'net use x: /d'
/***************************************************************************/
/* Next, log the user off from the LAN Server. */
/***************************************************************************/
say 'Logging off from LAN Server...'
'logoff'
/**************************************************************************/
/* If running in 'Prompt' mode, see if they want to stop LAN Distance. */
/**************************************************************************/
if provide = '/P' then do
say ' '
say ' '
say 'Do you want to hang up your calls and stop LAN Distance? (Y/N)'
pull stopit
if stopit <> 'Y' then
signal END_NOW
end
/***************************************************************************/
/* Stop the LAN Distance product, which will also hang up all active calls.*/
/***************************************************************************/
say 'Stopping LAN Distance...'
'ldist stop /Y'
/***************************************************************************/
/* End of procedure */
/***************************************************************************/
END_NOW:
'echo on'
say ' '
say ' '
say ' '
say 'Finished!'
exit
For more information on REXX, see the OS/2 REXX Reference and the OS/2 REXX
User's Guide.
ΓòÉΓòÉΓòÉ 20.4.1. Using Return Codes with Commands ΓòÉΓòÉΓòÉ
Successful LAN Distance commands return a value of 0; unsuccessful commands
return non-zero values. Check the return code from a command to determine if
your command procedure should continue or exit.
ΓòÉΓòÉΓòÉ 20.5. LDSTART ΓòÉΓòÉΓòÉ
LDSTART
Purpose
Starts LAN Distance services and (optionally) opens the LAN Distance
Workstations window.
Examples
This example starts the LAN Distance product.
LDSTART
This command will start the LAN Distance product and open the LAN
Distance Workstations window.
LDSTART START /UI
Syntax
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Γöé
Γöé >>ΓöÇΓöÇLDSTARTΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇ>< Γöé
Γöé ΓööΓöÇSTART /UIΓöÇΓöÿ Γöé
Γöé Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
Parameters
When you use the LDSTART command without parameters, the LAN Distance
product is started but the LAN Distance Workstations window is not
opened.
You can use the following parameter with this command:
START /UI Specifies that the LAN Distance Workstations window
should be opened. Issuing the LDSTART START /UI
command is equivalent to opening the LAN Distance icon
on the desktop.
Remarks
Use the LDSTART command to start LAN Distance when you want to use
LAN Distance functions by entering commands rather than through the
user interface.
The LDSTART command:
Starts basic services in the LAN Distance product so that your
workstation can communicate with other LAN Distance
workstations.
Starts any modem types configured as AUTOSTART = YES in the
WCLNET.INI file. These modem types are ready to place outgoing
calls and receive calls.
Starts autoanswer for any answer modes that are configured as
Enable answer mode on startup. This means that your LAN
Distance workstation is ready to receive incoming calls.
Note: If you will use the product through the LDIST command
interface, and you are not going to open the LAN Distance
Workstations window, you must issue the LDSTART command before
issuing LDIST commands.
ΓòÉΓòÉΓòÉ 20.6. LDIST START ΓòÉΓòÉΓòÉ
LDIST START
Purpose
Starts a modem type or starts autoanswer.
Examples
The following command starts autoanswer for an answer mode. named
PSTN_ALL_CALLS:
LDIST START /A:PSTN_ALL_CALLS
Syntax
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Γöé
Γöé >>ΓöÇΓöÇLDIST STARTΓöÇΓöÇΓö¼ΓöÇ/A:answermodeΓöÇΓö¼ΓöÇΓöÇ>< Γöé
Γöé ΓööΓöÇ/M:modemtypeΓöÇΓöÇΓöÿ Γöé
Γöé Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
Parameters
You must specify a parameter with LDIST START:
/A:answermode Specifies the name of the answer mode to be started.
answer mode names are case-sensitive.
/M:modemtype Specifies the name of the modem type to be started.
Remarks
Use this command to start autoanswer or to start a modem type after
the LAN Distance product has been started.
ΓòÉΓòÉΓòÉ 20.7. LDIST STOP ΓòÉΓòÉΓòÉ
LDIST STOP
Purpose
Stops a modem type, autoanswer, or the LAN Distance product.
Examples
The following command will stop a modem type named "HAYES_MODEMS". No
new connections will be made for this modem type, but any current
connections will remain active until the users disconnect them.
LDIST STOP /M:HAYES_MODEMS
The following command will stop the modem type named "HAYES_MODEMS",
and immediately stop any active connections for the modem type.
LDIST STOP /M:HAYES_MODEMS /IMMEDIATE
The following command will stop the LAN Distance product (including
any active connections). You will not be prompted with a pop-up
message to confirm the stop.
LDIST STOP /IMMEDIATE /Y
Syntax
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Γöé
Γöé >>ΓöÇΓöÇLDIST STOPΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇ>< Γöé
Γöé Γö£ΓöÇ/A:answermodeΓöÇΓöñ ΓööΓöÇ/IMMEDIATEΓöÇΓöÿ ΓööΓöÇ/YΓöÇΓöÿ Γöé
Γöé ΓööΓöÇ/M:modemtypeΓöÇΓöÇΓöÿ Γöé
Γöé Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
If you issue the LDIST STOP command without parameters, the LAN
Distance product is stopped. If you issue the LDIST STOP command
with a parameter of answermode or a modemtype, only the item
specified is stopped. You can use the following parameters with this
command:
Parameters
/A:answermode Specifies the name of the answer mode to be stopped.
No new incoming calls for answermode will be accepted.
answer mode names are case-sensitive.
/M:modemtype Specifies the name of the modem type to be stopped. No
new calls will be accepted for modemtype.
If calls are active for modemtype, and you do not use
the IMMEDIATE option, the LDIST STOP command will not
complete until the calls are stopped.
/I(MMEDIATE) Specifies whether connections should be stopped
immediately.
If the IMMEDIATE option is specified on a LDISTSTOP
command, all LAN Distance services (including active
connections) will be stopped immediately.
If the IMMEDIATE option is specified for autoanswer,
autoanswer will be stopped and all incoming calls
associated with the answer mode will be immediately
disconnected.
If the IMMEDIATE option is specified for a modem type,
the modem type will be stopped (no longer available
for making calls), and any active calls for the modem
type will be immediately disconnected.
If the IMMEDIATE option is not specified, connections
will remain active until users end them. For example,
if a LDIST STOP /A: is issued, no new incoming calls
will be allowed, but active connections associated
with the answer mode will remain active until ended by
users. The LDIST STOP command will not complete until
the calls are stopped.
/Y(ES) Bypasses the confirmation pop-up message. This option
is available when you are stopping the LAN Distance
product. If you use this keyword parameter, you will
not get a pop-up message to confirm the stop. If you
do not supply this parameter, a pop-up message will
prompt you to confirm that you want to stop the LAN
Distance product.
Remarks
If the LDIST STOP command is issued, any open LAN Distance windows
will be closed and the LAN Distance product will be stopped.
ΓòÉΓòÉΓòÉ 20.8. LDIST LOGON ΓòÉΓòÉΓòÉ
LDIST LOGON
Purpose
Obtains access to a LAN Distance workstation.
Examples
The following example shows the commands necessary to dial out of a
secure LAN Distance workstation. The workstation could be a secure
LAN Distance Remote or a secure LAN Distance Connection Server.
LDIST LOGON /S:MyWorkstation /U:MyUserId /P:MyPassphrase
LDIST DIAL /D:RemoteServer
Syntax
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Γöé
Γöé >>ΓöÇΓöÇLDIST LOGONΓöÇΓöÇ/S:serverΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇopt./P:passphraseΓöÇΓöÇ>< Γöé
Γöé ΓööΓöÇ/U:useridΓöÇΓöÿ Γöé
Γöé Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
Parameters
You must use the following parameters with this command:
/S:server The name of the secure LAN Distance Connection Server
or LAN Distance Remote that you are logging on to.
/U:userid Your user ID. If you do not supply this parameter, a
pop-up window will prompt you for the information.
/P:passphrase Your passphrase. If you do not supply this parameter,
a pop-up window will prompt you for the information.
Passphrases are case-sensitive.
Remarks
Use the LDIST LOGON command to obtain access to a machine before
dialing out with the LDIST DIAL command. Log on only to workstations
that are enabled for LAN Distance security.
Specifying a user ID and passphrase with the LDIST LOGON command is
not required. If you enter LDIST LOGON, the LAN Distance Logon
window is displayed.
Note: The keyboard lights for the Caps Lock, Scroll Lock and Num
Lock may fail to light up if you use one of these keys to enter user
ID and passphrase information in the LAN Distance Logon window. This
problem is only temporary. When the LAN Distance Logon window is
closed, these lights will function normally.
ΓòÉΓòÉΓòÉ 20.9. LDIST LOGOFF ΓòÉΓòÉΓòÉ
LDIST LOGOFF
Purpose
Logs off a LAN Distance workstation.
Examples
The following example shows the command for logging off a workstation
named "MyWorkstation".
LDIST LOGOFF /S:MyWorkstation
Syntax
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Γöé
Γöé >>ΓöÇΓöÇLDIST LOGOFFΓöÇΓöÇ/S:serverΓöÇΓöÇ>< Γöé
Γöé Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
Parameters
You must use the following parameter with this command.
/S:server The name of the secure LAN Distance Connection Server
or LAN Distance Remote that you are logging off.
Remarks
If you are logging off a workstation with open windows, the windows
will be closed.
If you log off a secure workstation that you have dialed, the
connection to that workstation remains active.
ΓòÉΓòÉΓòÉ 20.10. LDIST DIAL ΓòÉΓòÉΓòÉ
LDIST DIAL
Purpose
Dials a LAN Distance workstation and (optionally) automatically logs
on to that workstation.
Examples
The following example demonstrates making a call from the command
line for phone book entry "Remote Server".
LDIST DIAL /D:"Remote Server" /U:UserId /P:"The rain in Spain"
The status displayed will look similar to the following example,
depending on your modem type and the redial and callback
configuration.
ATDT555-5555
RING
RING
CONNECT ECL/9600
Waiting for callback
The request has completed successfully.
You may notice a delay between receiving the modem's CONNECT message
and the completion message, while the LAN Distance product exchanges
information with the workstation you are dialing.
Syntax
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Γöé
Γöé >>ΓöÇΓöÇLDIST DIALΓöÇΓöÇ/D:direntryΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇopt./U:useridΓöÇΓöÇ> Γöé
Γöé ΓööΓöÇ/N:numberΓöÇΓöÿ Γöé
Γöé Γöé
Γöé >ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇ>< Γöé
Γöé ΓööΓöÇ/P:passphraseΓöÇΓöÿ Γöé
Γöé Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
Parameters
You must use the following parameters with this command.
/D:direntry Name of the phone book entry. This is the name of a
phone book entry that was configured in the Phone Book
- Settings notebook. Phone book entry names are
case-sensitive.
/N:number This is an optional telephone number to override the
telephone number configured in direntry. If direntry
has more than one number configured (for redial), this
number will override the first configured number.
This number is not permanently stored in the
configuration for direntry.
/U:userid User ID for automatic logon to the secure LAN Distance
workstation that is being dialed.
/P:passphrase Passphrase for automatic logon to the secure LAN
Distance workstation that is being dialed.
Passphrases are case-sensitive.
Remarks
If a user ID and passphrase are given, the LAN Distance product will
automatically log on after a connection is established. If a user ID
and passphrase are not supplied and the LAN Distance workstation you
are dialing is secure, a pop-up window will prompt you for logon
information.
As the connection is being made, modem status is displayed. If the
connection cannot be made and you configured for automatic redial,
redial status is displayed. Also, callback status is displayed if
your workstation must be called back.
The connection can be disconnected with the LDIST HANGUP command or
through the LAN Distance Phone Book window.
ΓòÉΓòÉΓòÉ 20.11. LDIST HANGUP ΓòÉΓòÉΓòÉ
LDIST HANGUP
Purpose
Hangs up an active outgoing connection.
Examples
The following command will hang up an active connection with phone
book entry "Remote Server".
LDIST HANGUP /D:"Remote Server"
Syntax
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Γöé
Γöé >>ΓöÇΓöÇLDIST HANGUPΓöÇΓöÇ/D:direntryΓöÇΓöÇ>< Γöé
Γöé Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
Parameters
You must use the following parameter with this command.
/D:direntry Name of the phone book entry. Phone book entry names
are case-sensitive.
Remarks
You can use this command whether the connection was made with the
LDIST DIAL command or through the Phone Book window.
ΓòÉΓòÉΓòÉ 20.12. LDSHUTTL ΓòÉΓòÉΓòÉ
LDSHUTTL
Purpose
Allows a LAN Distance Remote to function as LAN or stand-alone
workstation. Use this command to move a workstation between a LAN
environment and a stand-alone environment.
Examples
This command will shuttle your workstation to function on a LAN.
LDSHUTTL LAN
Syntax
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Γöé
Γöé >>ΓöÇΓöÇLDSHUTTLΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇ>< Γöé
Γöé Γö£ΓöÇLANΓöÇΓöÇΓöÇΓöÇΓöñ Γöé
Γöé ΓööΓöÇREMOTEΓöÇΓöÿ Γöé
Γöé Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
Parameters
You can use the following parameters with this command. If a
parameter is not specified, a pop-up window will prompt you for the
environment to shuttle to.
REMOTE Specifies that the workstation should be switched to
function in a stand-alone environment.
LAN Specifies that the workstation should be switched to
function in a LAN environment.
Remarks
Two configurations are maintained for the workstation, one that sends
LAN protocol data over a LAN adapter, and one that sends LAN protocol
data over your WAN hardware.
The shuttle function switches the workstation to use the appropriate
configuration for the environment specified. After you enter the
LDSHUTTL command, you must shutdown and restart your workstation.
The LAN Distance product operates only when your workstation is in a
stand-alone environment.
ΓòÉΓòÉΓòÉ 20.13. LDREMOVE ΓòÉΓòÉΓòÉ
LDREMOVE
Purpose
Removes the LAN Distance product from your workstation.
Examples
This command will remove the LAN Distance product from your
workstation.
LDREMOVE
Syntax
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Γöé
Γöé >>ΓöÇΓöÇLDREMOVEΓöÇΓöÇ>< Γöé
Γöé Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
Remarks
When you enter this command, a window will display to confirm that
you want to remove the product from your workstation.
If you have erased the LAN Distance files from your workstation, you
can still use the LDREMOVE command to remove LAN Distance
configuration information from your workstation. To do this, insert
the Diskette 1 in the diskette drive, and type LDREMOVE.
ΓòÉΓòÉΓòÉ 21. Using OS2PING for Troubleshooting and LAN Distance Bridge Configuration ΓòÉΓòÉΓòÉ
OS2PING is a multipurpose tool designed for Token-Ring LAN configuration and
problem determination. OS2PING is provided with the LAN Distance product so
you can use it for troubleshooting and LAN Distance bridge configuration tasks:
Verify that a communications path exists between 2 workstations in your
LAN Distance wide area network.
Verify that the hop count defined at the LAN Distance bridge is large
enough to allow data from the sending workstation to reach the receiving
workstation.
Gather routing information to configure the LAN Distance bridge on a
Token-Ring LAN in a multisegmented network environment.
MSWIN MS Windows LAN Distance Remotes can use LANPING, the DOS version of
OS2PING. See Using the LANPING Tool for MS Windows.
ΓòÉΓòÉΓòÉ 21.1. Using the OS2PING Tool ΓòÉΓòÉΓòÉ
The OS2PING tool is installed in the WAL directory when the LAN Distance
product is installed. You can run OS2PING from a LAN Distance Remote or
LAN Distance Connection Server.
OS2PING requires the IEEE 802.2 LAN protocol. Add the 802.2 LAN protocol
to the protocols configured for the LAN Distance Logical Adapter. See
Configuring Additional LAN Protocols Required for Your OS/2 LAN
Applications.
Online help for the OS2PING tool is provided in the OS2PING.INF file. To
view help information, from an OS/2 command line, type:
VIEW OS2PING.INF
The syntax for the OS2PING command is shown below. In place of the -a
parameter, specify the Token-Ring or Ethernet address of the destination
workstation. The -r parameter is the option to return and display
routing information.
OS2PING -a=1234567890ABC -r
The bridge or router hardware between different LANs (Token-Ring and
Ethernet) can bit-inverse LAN addresses. This is a consideration when
using OS2PING across different LAN types. Follow these guidelines:
- If the destination address is on a Token-Ring LAN, use the
Token-Ring address, regardless of the LAN type (Token-Ring or
Ethernet) used by the LAN Distance product.
- If the destination address is on a Ethernet LAN, bit inverse the
Ethernet address, regardless of the LAN type (Token-Ring or
Ethernet) used by the LAN Distance product.
Note: For information about bit-inversing LAN addresses, see Using
Bit-Inverted Addresses to Filter Traffic between Token-Ring and Ethernet
LAN Segments.
ΓòÉΓòÉΓòÉ 21.2. Using the LANPING Tool for MS Windows ΓòÉΓòÉΓòÉ
MS Windows LAN Distance Remotes can use LANPING as OS2PING is used: to verify a
physical connection, check the hop count defined for the LAN Distance bridge,
and gather information for LAN Distance bridge configuration.
LANPING is installed when the MS Windows LAN Distance Remote product is
installed. LANPING is located in the WAL directory. You can run LANPING
from a MS Windows LAN Distance Remote workstation.
LANPING requires the IEEE 802.2 LAN protocol. Use LSP to install the
802.2 protocol. See Determine the Appropriate Method for Installing LSP.
The syntax for the LANPING command is shown below. Specify this command
from the MS Windows Run Command Line or from a DOS command prompt. In
place of the -a parameter, specify the Token-Ring or Ethernet address of
the destination. The -r parameter is the option to return and display
routing information.
LANPING -a=1234567890ABC -r
ΓòÉΓòÉΓòÉ 21.3. Example 1: Using OS2PING to Verify a Communications Connection ΓòÉΓòÉΓòÉ
If you experience problems establishing a connection to a LAN Distance
workstation, or to another workstation (or resource) in your network, use the
OS2PING tool to verify that a your workstation's address can communicate with a
destination workstation's address.
Multisegmented Token-Ring LAN Environment
In the following example, the LAN Distance Remote shown in Multisegmented
Token-Ring LAN Environment is using OS2PING to verify 1) the communications
path from LAN Distance Remote to the LAN Distance Connection Server on LAN
segment CEA and 2) the communications path to the LAN Server Domain Controller
on LAN CEA.
To verify that a communications path exists between the LAN Distance Remote and
the LAN Distance Connection Server on LAN segment CEA:
1. Establish a LAN Distance connection from the LAN Distance Remote to the
LAN Distance Connection Server on segment CEA.
2. To verify that the LAN Distance Remote can communicate with the LAN
Distance Connection Server, run OS2PING from the LAN Distance Remote
using the LAN Distance logical adapter network address of the LAN
Distance Connection Server (400012345678).
From an OS/2 command prompt, type OS2PING -a=400012345678 -r, then press
Enter.
3. If OS2PING returns routing information, as shown in OS2PING Token-Ring
Routing Information, the LAN Distance Remote and LAN Distance Connection
Server can communicate over the LAN Distance connection. If the No
Responses Received Message is displayed, one of the following problems
can exist:
An incorrect LAN Distance logical adapter network address was
specified for the LAN Distance Connection Server.
The LAN Distance Remote or LAN Distance Connection Server is not
correctly configured.
To verify that a communication path exists between the LAN Distance Remote and
the LAN Server Domain Controller on LAN CEA:
1. Establish a LAN Distance connection from the LAN Distance Remote to the
LAN Distance Connection Server on LAN segment CEA.
2. To verify that the LAN Distance Remote can communicate with the LAN
Server Domain Controller on LAN segment CEA, run OS2PING from the LAN
Distance Remote using the LAN network address of the LAN Server Domain
Controller (400087654321).
From an OS/2 command prompt, type OS2PING -a=400087654321 -r, then press
Enter.
3. If a communications path exists between the LAN Distance Remote and the
LAN Server Domain Controller, OS2PING returns routing information. If
multiple paths between workstations exist, more than one line of routing
information is displayed as shown in the example in OS2PING Token-Ring
Routing Information.
Note: If your destination address is an Ethernet address, routing
information is not displayed because transparent bridging is used by
Ethernet LANs.
OS2PING Token-Ring Routing Information
OS2PING: First response received
OS2PING: ADDR=xxxxxxxxxxxx Route was:
(002) 1 --> (cea) 7 --> (b22) 5 --> (c3a)
OS2PING: Later response(s) :
OS2PING: ADDR=xxxxxxxxxxxx Route was:
(002) 1 --> (cea) 7 --> (b22) 5 --> (c3a)
OS2PING: ADDR=xxxxxxxxxxxx Route was:
(002) 1 --> (cea) 7 --> (4ab) 2 --> (c21) 3 --> (b31) 5-->(c3a)
If a physical connection does not exist, or an incorrect address was
used, OS2PING returns the "No responses received message" See Resolving
the `No Responses Received' Message..
ΓòÉΓòÉΓòÉ 21.4. Example 2: Using OS2PING to Verify the LAN Distance Bridge Hop Count ΓòÉΓòÉΓòÉ
If you experience problems establishing a LAN Distance connection, use the
OS2PING tool to verify that the hop count defined for the LAN Distance bridge
is large enough to allow data frames from the sending workstation to reach the
receiving workstation.
In the following example, the LAN Distance Remote shown is using OS2PING to
count the number of bridges between the LAN Distance Remote on WAN segment 002
and the LAN Server on LAN segment C3A.
1. Establish a LAN Distance connection from the LAN Distance Remote to the
LAN Distance Connection Server on LAN segment CEA.
2. Run OS2PING using the LAN network address of the LAN Server on C3A to
count the number of bridges between the LAN Distance Remote and the LAN
Server (400012345ABC).
3. From an OS/2 command line, type OS2PING -a=400012345ABC -r, then press
Enter.
4. OS2PING displays routing information for the path between the LAN
Distance Remote and the LAN Server on LAN segment C3A.
OS2PINGToken - RingRoutingInformation
(002) 1 --> (CEA) 7 --> (B22) 5 --> (C3A)
(WAN-1) LD Bridge (LAN-2) Bridge (LAN-3) Bridge (LAN-4)
The routing information displayed in OS2PING Token-Ring Routing Information
indicates:
Three bridges were crossed from the LAN Distance Remote on segment 002 to
the LAN Server on segment C3A. (One LAN Distance bridge and 2 Token-Ring
bridges.)
For this example, the hop count defined for the LAN Distance bridge
should be equal to or greater than 3.
ΓòÉΓòÉΓòÉ 21.5. Example 3: Using OS2PING to Define LAN Distance Bridge Configuration Values ΓòÉΓòÉΓòÉ
This example uses the routing information from Example 2 to show how to
interpret OS2PING routing information, and use this routing information to
configure the LAN Distance bridge.
ΓòÉΓòÉΓòÉ 21.5.1. Interpreting OS2PING Routing Information ΓòÉΓòÉΓòÉ
The routing information displayed in OS2PING Token-Ring Routing Information
indicates:
The values in parentheses are segment ring numbers. 002 is the WAN
segment ring number and CEA, B22, and C3A are the LAN segment ring
numbers.
The LAN Distance bridge is number 1, and the other Token-Ring LAN bridges
are numbered 7 and 5.
Three bridges (one LAN Distance bridge and 2 Token-Ring bridges) were
crossed from the LAN Distance Remote on WAN segment 002 to the LAN Server
on LAN segment C3A.
LAN Distance Connection Server segment ring number is CEA.
OS2PING Token-Ring Routing Information
(002) 1 --> (CEA) 7 --> (B22) 5 --> (C3A)
(WAN-1) LD Bridge (LAN-2) Bridge (LAN-3) Bridge (LAN-4)
ΓòÉΓòÉΓòÉ 21.5.2. Defining Configuration Values for the LAN Distance Bridge ΓòÉΓòÉΓòÉ
The routing information from Example 1: Using OS2PING to Verify a
Communications Connection is used as an example to define the LAN Distance
bridge configuration values shown in LAN Distance Bridge Configuration Example.
Bridge configuration values are entered on pages 1, 2, and 3 of the Bridge tab
in the Settings notebook. See Setting Up the LAN Distance Bridge.
Remember these requirements for LAN Distance bridge configuration values:
In a multisegmented LAN environment, the LAN Distance bridge number, LAN
segment ring number, and WAN segment ring number must combine to form a
unique route designator.
The hop count defined for the LAN Distance bridge should be equal to or
greater than the number of bridges (including the LAN Distance bridge)
between the sending and receiving workstations.
Your LAN Distance LAN segment ring number must match the number defined
for your LAN segment at other bridges in your LAN environment.
Your LAN Distance WAN segment ring number must be unique.
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Table 40. LAN Distance Bridge Configuration Example Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé FIELD Γöé VALUE Γöé EXPLANATION Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Bridge Γöé 1 Γöé OS2PING returned routing information, so the default Γöé
Γöé number Γöé Γöé LAN Distance bridge number of 1 can be used. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé LAN Γöé CEA Γöé This is the segment number for the LAN that the LAN Γöé
Γöé segment Γöé Γöé Distance Connection Server is connected to. Γöé
Γöé ring Γöé Γöé Γöé
Γöé number Γöé Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Maximum Γöé 3 Γöé The network bridge hop number defined for the LAN Γöé
Γöé number of Γöé Γöé segment (page 2 of 2) should match the network bridge Γöé
Γöé network Γöé Γöé hop number defined for the WAN segment (page 3 of 3). Γöé
Γöé bridge Γöé Γöé Γöé
Γöé hops Γöé Γöé Calculate the minimum value for the hop count by adding Γöé
Γöé Γöé Γöé the LAN Distance bridge and the 2 Token-Ring bridges Γöé
Γöé Γöé Γöé between the LAN Distance Remote on segment 002 and the Γöé
Γöé Γöé Γöé LAN Server on segment cea. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé WAN Γöé 002 Γöé OS2PING returned routing information, so the default Γöé
Γöé segment Γöé Γöé WAN segment ring number of 2 can be used. Γöé
Γöé ring Γöé Γöé Γöé
Γöé number Γöé Γöé The WAN segment ring number must be different than the Γöé
Γöé Γöé Γöé LAN segment ring number. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Maximum Γöé 3 Γöé The network bridge hop number defined for the WAN Γöé
Γöé number of Γöé Γöé segment (page 3 of 3) should match the network bridge Γöé
Γöé network Γöé Γöé hop number defined for the LAN segment (page 2 of 2). Γöé
Γöé bridge Γöé Γöé Γöé
Γöé hops Γöé Γöé Calculate the minimum value for the hop count by adding Γöé
Γöé Γöé Γöé the LAN Distance bridge and the 2 Token-Ring bridges Γöé
Γöé Γöé Γöé between the LAN Distance Remote on segment 002 and the Γöé
Γöé Γöé Γöé LAN Server on segment CEA. Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓòÉΓòÉΓòÉ 21.5.3. Resolving the `No Responses Received' Message. ΓòÉΓòÉΓòÉ
If OS2PING is unable to find the destination address you specify, the following
message is returned:
OS2PING: No responses received during 10 second wait.
This message can be displayed for any of the following reasons:
The default -wait parameter (10 seconds) does not allow enough time for a
response to be returned.
An incorrect address was specified for the destination workstation.
A workstation on the LAN may not be correctly attached to the LAN or
correctly configured for LAN communications.
The hop counts defined for the LAN Distance bridge or other hardware
bridges are not large enough to allow data from the sending workstation
to reach the receiving workstation.
The segment numbers for your LAN Distance bridge are not configured
correctly.
The following troubleshooting steps address these problems. If you receive
the No Responses Received Message, try using these steps to test your
communications connections.
1. The -wait parameter specifies the amount of time (in seconds) to wait for
a response. Increase the -wait parameter (the default is 10 seconds).
In this example, the -wait parameter is increased to 30 seconds.
OS2PING -a=1234567890ABC -r -w=30
2. To verify that the LAN Distance Connection Server is properly attached to
the LAN, from the LAN Distance Connection Server run OS2PING using the
address of LAN workstation on the LAN Distance Connection Server's LAN
segment. If routing information is returned, the LAN Distance Connection
Server is properly attached and configured for LAN communications.
3. To verify the address for the destination LAN workstation on the LAN,
from the LAN Distance Connection Server run OS2PING using the destination
address of the LAN workstation. If routing information is returned, you
know 1) that you are using the correct destination address and 2) that
the LAN Distance Connection Server can communicate with the destination
LAN workstation.
4. To verify the LAN Distance WAN connection between a LAN Distance Remote
and a LAN Distance Connection Server, from the LAN Distance Remote run
OS2PING using the LAN Distance logical adapter network address of the LAN
Distance Connection Server. If routing information is returned, the 2
workstations can communicate over the LAN Distance WAN connection.
5. To check the hop counts between a LAN Distance Remote and a destination
workstation on the LAN, from the LAN Distance Remote run OS2PING using
the address of a workstation on each LAN segment between the LAN Distance
WAN segment and the destination workstation's LAN segment.
For example, if the destination workstation is on LAN-4, from the LAN
Distance Remote, run OS2PING using the destination address of a
workstation on LAN-1, LAN-2, and LAN-3.
If routing information is returned for all of the LANs except for LAN-3,
try increasing the hop count for bridge between LAN-2 and LAN-3.
6. To ensure that the segment numbers for your LAN Distance bridge are
configured correctly, review the information in Defining Configuration
Values for the LAN Distance Bridge.
ΓòÉΓòÉΓòÉ 22. Modifying Modem Strings in a LAN Distance PIF File ΓòÉΓòÉΓòÉ
Product information files (PIFs) contain the configuration values and modem
string information needed to initialize a modem. Each modem type supported by
the LAN Distance product has its own PIF file (stored in the WAL directory). A
sample PIF file for the IBM7855 modem is provided in this appendix.
The following tasks are described in this chapter:
Use the graphical Port/Modem utility to create a modem type for a modem
not listed in the Available modem types list box. See Using the
Port/Modem Utility.
Manually create a new PIF file for a modem type not listed in the
Available modem types list box. See Creating a New PIF File for a Modem
Not in the List.
Use the graphical Port/Modem utility to customize an asynchronous modem's
dial string for calling card user. See Modifying a Dial String for
Outside Calls.
Manually customize an asynchronous modem's dial string for calling card
use by editing the PIF file. See Modifying a Dial String for Outside
Calls.
Use the graphical Port/Modem utility to modify the serial port speed for
your asynchronous modem. See Modifying the Speed for FIFO and non-FIFO
Serial (COM) Ports.
Manually modify the serial port speed for asynchronous modems. See
Modifying the Speed for FIFO and non-FIFO Serial (COM) Ports.
Note: To modify configuration values and modem strings in a LAN Distance PIF
file, you need technical knowledge of modems and experience in configuring
communications software.
The instruction manual for your modem contains important information about AT
command set modem commands, dial modifiers, and default configuration values
for your modem. You will need to refer to your modem user documentation to
complete the tasks described in this chapter.
ΓòÉΓòÉΓòÉ 22.1. Using the Port/Modem Utility ΓòÉΓòÉΓòÉ
Use the Port/Modem utility to create a new modem type to configure your
unlisted modem if:
You are unable to configure your unlisted modem using a listed modem as
described in What to Do If Your Modem Is Not Listed.
You cannot establish a connection using the PIF file you created in
Creating a New PIF File for a Modem Not in the List.
After you create a new modem type for your unlisted modem, you can use the
Port/Modem utility to configure your new modem type and test the new modem
type to see if it will work with the LAN Distance product.
ΓòÉΓòÉΓòÉ 22.1.1. Starting the Port/Modem Utility ΓòÉΓòÉΓòÉ
To start the Port/Modem utility, type CFMODEM from an OS/2 command prompt.
Port/Modem Utility Notebook
ΓòÉΓòÉΓòÉ 22.1.2. Creating a New Modem Type for a COM Port ΓòÉΓòÉΓòÉ
Follow these steps to create a new modem type for your unlisted modem using the
Port/Modem utility:
1. Start the Port/Modem utility. From the Port/Modem utility notebook
(shown below), select the Strings tab.
2. From the Strings tab, select the Select modem type push button.
Port/Modem Notebook, Available Modem Types Window
Select a similar modem type from the Available modem types list box
(Port/Modem Notebook, Available Modem Types Window) to use as a model for
creating your new modem type. To select a similar modem type, use the
following guidelines:
Select a modem type from the same manufacturer.
If your modem is compatible with a listed modem type, select the
compatible modem.
Select the Asynchronous Switched Connection Modem type.
Select any of the other modem types listed.
3. Select the Create a new asynchronous modem type using the selected modem
type as a model check box.
4. Specify a title for the new modem type in the modem type field. A title
is required to identify your new modem type among the many modem types
listed in the Available modem types field.
Select the OK push button. The title of the modem type you are creating
is displayed in the Modem title field on the Strings tab (Port/Modem
Notebook, Strings Tab).
Port/Modem Notebook, Strings Tab
5. Create an initialization string for your new modem type, select the Build
string push button. The Port/Modem Build String window (Port/Modem
Notebook, Build Strings Window) is displayed.
Port/Modem Notebook, Build Strings Window
6. Use the documentation for your unlisted modem to answer questions 1
through 19 on the Build Strings window.
Answers to these questions are unique to your modem and are used to build
the initialization string for your modem (shown on Page 1 of 2 of the
Strings tab).
When you have answered all the questions, select the OK push button.
7. From the Strings tab, select the Save push button to save the
initialization string (Initialization 1 and Initialization 2) created for
your new modem type.
Note: Optional configuration values for fine tuning your modem are
available on Page 2 of 2 of the Strings tab.
ΓòÉΓòÉΓòÉ 22.1.3. Configuring a New Modem Type ΓòÉΓòÉΓòÉ
Follow these steps to configure the new modem type:
1. Select the Ports tab (Port/Modem Utility Notebook, Ports Tab) to define
required COM port parameters and assign a COM port to your modem type.
Port/Modem Utility Notebook, Ports Tab
From the COM port field, select the COM port (COM1, COM2...) that your
modem is connected to.
From the Line type field, select the Switched radio button. (Use this
default setting for switched and nonswitched telephone lines)
2. Select the Save push button to save the configuration settings for your
COM port.
3. Select the Assign tab and select the Assign push button to display the
Port/Modems Assignments window (Port/Modem Assignments Window).
4. From the Available modem types list box, select the modem type you
created.
From the Unassigned configured ports list box, select your COM port.
Port/Modem Assignments Window
Select the Link push button to link your COM port and modem type
selections.
Selecting the Link push button displays the Phone number window. This
gives you the option of specifying a telephone number or a permanent
connection name.
5. Select Exit from the Port/Modem Assignments window, to return to the
Assign tab. The COM port and modem type you linked are displayed in the
list box (Port/Modem Notebook, Assign Tab).
Port/Modem Notebook, Assign Tab
ΓòÉΓòÉΓòÉ 22.1.4. Testing the New Modem Type ΓòÉΓòÉΓòÉ
Follow these steps to test the new modem type:
1. From the Assign tab (Port/Modem Notebook), select the Test string push
button to test the initialization string for your new modem type.
If you receive a message stating that the maximum speed for your port has
been updated, this indicates that your new modem type can use the
initialization string you created. It also indicates that you should be
able to dial out and establish a LAN Distance connection using your
modem.
If you receive a message stating that there is an error with the
initialization string you created, return to the Port/Modem Build Strings
window to verify the answers supplied to questions 1 through 19. Use
your modem manual to verify your answers. Then rebuild and retest your
initialization string.
Note: If you are unable use the modem type created using the Port/Modem
utility to establish a LAN Distance connection, and you tried creating a new
PIF file for your modem type, contact your designated support organization for
assistance.
ΓòÉΓòÉΓòÉ 22.2. Creating a New PIF File for a Modem Not in the List ΓòÉΓòÉΓòÉ
If you are unable to establish a LAN Distance connection with your unlisted
modem using a listed modem type as described in What to Do If Your Modem Is Not
Listed, you can:
Create a new modem type using the graphical Port/Modem utility. See Using
the Port/Modem Utility.
Manually create a new modem type by creating a new PIF file. Complete the
steps listed in this section.
Follow these steps to create a PIF file:
Select a PIF File to Use as a Template
1. Open the Settings notebook, select the Modems tab and select the Assign
push button.
2. From the Available modem types field, scroll through the list to identify
a modem similar to yours.
3. Try the following strategies, as listed, to select a comparable modem
type from the Available modem types field:
a) Select a modem made by the same manufacturer.
b) If your modem is compatible with a supported modem type, select the
compatible modem type.
c) Select the Asynchronous Switched Connection Modem type.
d) Select any remaining listed modem type.
Record the name of the modem type you identify as similar to your modem.
4. In Modems Supported by the LAN Distance Product in Modems, find the PIF
file name that matches the modem type you recorded in step Creating a New
PIF File for a Modem Not in the List.
5. Make a copy of that PIF file to use as a template.
From an OS/2 command prompt, type CD WAL to go to the WAL directory.
Type COPY oldfile.PIF newfile.PIF. Oldfile is the name of the PIF
file identified in step Creating a New PIF File for a Modem Not in
the List and newfile is the new name of your new PIF file.
Modify the Template PIF File for Your Modem
Use any ASCII text editor to modify the template PIF file. This example
uses the OS/2 system editor.
6. To modify the template PIF file to create a PIF file for your modem:
From an OS/2 command prompt, type CD WAL to go to the WAL directory.
From the WAL directory, type E newfile.PIF and press Enter. Newfile
is the new name of your new PIF file.
7. In your template PIF file, modify the following parameters. The values
listed here are taken from the example PIF file for the IBM 7855 Modem,
provided later in this section.
PIF = IBM7855.PIF
This parameter contains the name of the file you are using as a
template. Choose an 8-character file name that is specific to
your modem, and use PIF as the file extension, for example
PDQMODEM.PIF.
Title = "IBM 7855 Modem"
Choose a title description that is specific to your modem and will
be easy for you to recognize in a list of other modems. You can
enter up to 60 characters, for example "PDQ Giga Bit Screamer".
The opening and closing quote marks are required. If you have
already specified a title description, you do not need to change
it.
[SerialPortSpeed]
The default value for the serial port speed specifies the speed at
which data is passed between the serial port and the modem. It is
also called the modem-to-computer or DTE line speed. Use your
modem manual to determine the speed to specify when the modem is
using internal data buffering. The left and right brackets are
required.
[Initialization1] [Initialization2:]
8. In the template PIF file, you may need to change the default
initialization string to meet the configuration requirements described in
steps a through g. The commands for these configuration requirements can
vary from modem to modem, consult your modem manual for the correct
commands for your modem.
AT command set commands are entered on the Default = lines of the
[Initialization1] and [Initialization2] section of the PIF file.
Use LAN Distance required characters to represent the following
characters in the initialization string.
Characters LAN Distance Required Characters
carriage return character \CR
line feed character \LF
backslash character \\
Change your template PIF file as follows:
a) DTR (Data Terminal Ready)
The DTR signal indicates to the modem when the computer is ready to
send and receive information. Different modem commands cause the
modem to interpret the DTR signal in various ways.
Select the modem command that configures the modem to hang up and
enter the command state if the DTR signal turns off. The modem
should not respond to incoming calls when the DTR signal is low. Do
not configure the DTR command so the modem resets when an on-to-off
transition occurs. (For most modems, the correct command is &D2).
b) CD (Carrier Detect)
The CD signal tracks the presence or absence of the carrier signal
from the modem on the other end of the line. Some modem manuals
refer to the CD as the DCD or RLSD. Modems can be configured to
interpret the CD in several ways. Select the CD modem command that
causes the modem to track the status of the carrier detect signal.
(For most modems, this command is &C1.)
c) DSR (Data Set Ready)
The DSR is a signal the modem sends to the computer to indicate that
the modem is ready to start a dialog. Configure the DSR for your
modem to go from on to off when a connection ends. (For most modems,
the correct command is &S1.)
d) RTS/CTS
Several types of flow control are supported for most modems. RTS and
CTS signals support bidirectional hardware flow control. (Some
modem manuals refer to CTS as RFS.) Configure your modem so it
supports RTS/CTS flow control. The AT modem command for this
feature varies from modem to modem.
e) Data Buffering
Data buffering prevents loss of data during transmission. It is
essential for all communications in which the modem-to-computer
(DTE) speed is faster than the modem-to-modem (DCE) speed. Select
the data buffering AT command to enable data buffering for your
modem. The AT modem command for this feature varies from modem to
modem.
f) Automatic Answer
Set up the modem to automatically answer a call on the second ring.
For most modems, this command is S0=n, where n specifies the number
of rings before the modem automatically answers the call. Set n to
2.
g) Character Echo
The character echo feature can be configured to display or not
display commands received by the modem when it is in the command
state. Select the modem command that enables character echo. (For
most modems, this command is E1.)
h) Verbose Response Mode
Modems display responses or result codes to accept or reject
commands. Result codes are also sent to report on connection
progress. Most modems are defaulted to the report result codes as
words, instead of numbers. Make sure your modem is set to report
responses as words (verbose response mode). (For most modems, this
command is V1.)
9. Save your new PIF file in the \WAL directory.
Configure Your Modem Using the PIF File You Created
10. Start the LAN Distance product.
11. Open the Settings notebook.
12. If you already have a port configured, continue with step Creating a New
PIF File for a Modem Not in the List. If you do not have a port
configured, configure one:
a) Select the Ports tab, then select the Add push button.
b) Select a port then select OK.
c) Select the COM port you will assign to the modem.
d) Select Switched for Line type.
e) Close the COM port window.
You now have a port configured.
13. Select the Modems tab. Delete any modem type assigned to your configured
port.
This only deletes the association between a modem type and a configured
port. It does not delete either the modem type or the port
configuration. The deletion is necessary in order to pick up the changes
made to the PIF file.
14. Select the Assign push button.
15. From the Available modem types field, select the modem type you created
for your modem then select OK.
The modem type you created will have the name you entered in the Title
keyword during step Creating a New PIF File for a Modem Not in the List.
16. From the Ports tab within Modem settings, select Add to continue modem
configuration.
17. Select Switched for the type of telephone line. You may also specify an
optional Phone Number for the modem. Select OK.
18. From the Available ports field, select the configured port that you want
to assign to the modem type. Select OK.
19. Close the Ports tab.
20. Close the Settings notebook and select Yes to save changes.
21. If you made changes to the Ports tab, stop all applications, shut down
and restart your workstation.
If you only made changes to the Modems tab, stop and restart the LAN
Distance product.
22. Establishing a LAN Distance Connection describes how to establish a
connection.
23. If you cannot communicate using your modem, retry the steps described in
the Select a PIF File to Use as a Template procedure and the Modify the
Template PIF File for Your Modem procedure, (steps Creating a New PIF
File for a Modem Not in the List through Creating a New PIF File for a
Modem Not in the List).
Note: If you are unable use the PIF file to establish a LAN Distance
connection, and you have tried creating a new modem type using the Port/Modem
utility, contact your designated support organization for assistance.
ΓòÉΓòÉΓòÉ 22.3. Customizing the Dial String for Asynchronous Modems ΓòÉΓòÉΓòÉ
You may want to modify the modem string to automatically access an outside line
or use your calling card each time you dial out through that modem type. When
you change the dial string in the PIF file, remember that the dial string is
changed for each call placed through any modem managed by this modem type.
Choose one of the following methods to customize the dial string for your modem
type:
Use the graphical Port/Modem utility to customize the dial string for
your modem. Edit the Dial Prefix and Dial Suffix fields on pages 1 and 2
of the Strings tab. See Using the Port/Modem Utility.
Manually customize the dial string in the PIF file by completing the
steps listed in this section.
To manually customize the dial string in the PIF file for a modem, complete
these steps:
Modifying the Dial String for an Asynchronous Modem
1. Match a PIF file name to your modem type using Modems Supported by the
LAN Distance Product in the Supported Hardware.
2. PIF files contain values required to use your modem with the LAN Distance
product. Make a backup copy of the file you are modifying so you always
have a copy of your modem's original PIF file.
From an OS/2 command prompt, type CD\ WAL to go to the WAL
directory.
From the WAL directory, type COPY filename.PIF filename.BAK.
Filename is the name of the PIF file identified in step Customizing
the Dial String for Asynchronous Modems.
3. Use any ASCII text editor, such as the OS/2 system editor, to modify your
modem's dial string.
From an OS/2 command prompt, type CD\ WAL to go to the WAL
directory.
From the WAL directory, type E filename.PIF Filename is the name
you gave the copy of your modem's PIF file.
4. Modify the dial string for your dialing requirements.
In the PIF file for your modem type, locate the DialPrefix and
DialSuffix. The dial string for your modem is made up of the DialPrefix
and DialSuffix sections in a PIF file as shown in the following example.
[DialPrefix]
Display = D12
Type = String
StrLength = 255
Default = "ATDT"
Optional = NO
Help = H12
[DialSuffix]
Display = D13
Type = String
StrLength = 255
Default = "\CR"
Optional = NO
Help = H13
When you modify the DialPrefix and DialSuffix in your modem's PIF file:
a) See your modem user manual to determine the dial modifiers to use to
modify the dial string for your modem.
b) Add numbers and dial modifiers at the end of the Default = "ATDT"
command in the DialPrefix section at the beginning of the
Default = "\CR" command in the DialSuffix section, depending on the
telephone requirements.
c) When you modify the dial string, represent the following characters
using LAN Distance required characters:
Characters LAN Distance Required Characters
carriage return character \CR
line feed character \LF
backslash character \\
d) The modem responds to the commands in the DialPrefix before the
telephone number is dialed, and to the commands in the DialSuffix
after the telephone number is dialed. Example 1: Customizing the
Dial String to Make Outside Calls
To dial "9" and wait for a second dial tone, add "9W" to the end of the
default DialPrefix string. The "W" dial modifier instructs the modem to
wait for a second dial tone before proceeding.
Modifying a Dial String for Outside Calls
[DialPrefix]
Display = D12
Type = String
StrLength = 255
Default = "ATDT9W"
Optional = NO
Help = H12
Example 2: Customizing the Dial String for Calling Card Use
When using a calling card to make a long distance call, the telephone
number is usually preceded by a number identifying the long distance
carrier and a 0. Add these numbers to the end of the default DialPrefix
string. Once the telephone number is dialed, the modem must pause to
wait for a gong tone, and then dial the calling card number. The comma
(,) dial modifier instructs the modem to pause for 2 seconds. Several
commas can be used for a longer delay. The commas and the calling card
number are added to the beginning of the default DialSuffix string.
Modifying a Dial String for Calling Card Use
[DialPrefix]
Display = D12
Type = String
StrLength = 255
Default = "ATDT102880"
Optional = NO
Help = H12
[DialSuffix]
Display = D13
Type = String
StrLength = 255
Default = ",,51282300001234\CR"
Optional = NO
Help = H13
In Modifying a Dial String for Calling Card Use, when a call is made the
modem dials the long distance carrier identifier (10288), 0, and then
the telephone number specified in the phone book. After dialing the
telephone number, the modem pauses for 4 seconds (2 commas) and then
dials the calling card number (51282300001234).
Warning: If a LAN Distance Connection Server dials out through a modem
type customized with a calling card number, this number can be accessed
by LAN Distance Remotes that dial the LAN Distance Connection Server
through call and port management. If a LAN Distance Remote dials out
through a modem type customized with a calling card number, this number
can be accessed only from the dialing LAN Distance Remote.
5. When you finish modifying the dial string, save your PIF file in the WAL
directory.
Configure Your Modem Using the Modified PIF File
6. Start the LAN Distance product if it is not started.
7. Open the Settings notebook.
8. If you already have a port configured, continue with step Customizing the
Dial String for Asynchronous Modems. If you do not have a port
configured, configure one:
a) Select the Ports tab, then select the Add push button.
b) Select a port then select OK.
c) Select the COM port you will assign to the modem.
d) Select Switched for Line type.
e) Close the COM port window.
You now have a port configured.
9. Select the Modems tab. Delete any modem type assigned to your configured
port.
Note: This only deletes the association between a modem type and a
configured port. It does not delete either the modem type or the port
configuration. The deletion is necessary in order to pick up the changes
made to the PIF file.
10. Select the Assign push button.
11. From the Available modem types field, select the modem type for your
modem then select OK.
12. From the Ports tab within Modem settings, select the Add push button to
continue modem configuration.
13. Select Switched for the type of telephone line. You can also specify an
optional Phone Number for the modem. Select OK.
14. From the Available ports field, select the configured port that you want
to assign to the modem type. Select OK.
15. Close the Ports tab.
16. Close the Settings notebook and select Yes to save changes.
17. If you made changes to the Ports tab, stop all applications, shut down
and restart your workstation.
If you only made changes to the Modems tab, stop and restart the LAN
Distance product.
18. Establishing a LAN Distance Connection describes how to establish a
connection.
19. If you cannot communicate using your modem or the dial string is not
passing the values you have configured, check the previous steps.
ΓòÉΓòÉΓòÉ 22.4. Modifying the Speed for FIFO and non-FIFO Serial (COM) Ports ΓòÉΓòÉΓòÉ
Because OS/2 non-FIFO workstations generally do not support connection speeds
greater than 9600 bps, the LAN Distance product sets the serial port speed for
non-FIFO modems to 9600 bps. You can try to optimize your serial port speed if
1) your OS/2 non-FIFO workstation has a processing speed of 25 Mhz or greater
or 2) the modem attached to the COM port supports transmission speeds greater
than 9600 bps.
Note: You may also need to change the serial port speed for a FIFO serial
port if you receive errors WCL0221, WCL0336, or experience spontaneous
disconnects.
Choose one of the following methods to modify the serial port speed:
Using the graphical Port/Modem utility, you can change the serial port
speed for your modem by editing the SerialPortSpeed parameter on Page 2
of 2 of the Strings tab. See Using the Port/Modem Utility.
Manually change the serial port speed in the PIF file by completing the
steps listed in this section.
To manually change the default serial port speed in your PIF file, complete
these steps:
1. Follow the steps in Modifying a Dial String for Outside Calls, except,
substitute step Customizing the Dial String for Asynchronous Mod Modems
with step Modifying the Speed for FIFO and non-FIFO Serial (COM) Ports.
2. Specify a new value for the Default keyword (see step Modifying the Speed
for FIFO and non-FIFO Serial (COM) Ports) in the SerialPortSpeed section
of the PIF file to increase the serial port speed for your modem.
SerialPortSpeed Section in a PIF File
[SerialPortSpeed]
Display = D4
Type = Decimal
Default = 19200
Range = 1200-115200
Optional = NO
Help = H4
3. Try incrementing this value as follows:
9600 to 14400(**)
14400 to 19200
19200 to 38400
ΓòÉΓòÉΓòÉ 22.5. Example LAN Distance PIF File for the IBM 7855 Modem ΓòÉΓòÉΓòÉ
PIF files contain multiple sections and list keyword=value pairs within each
section. Sample PIF File for the IBM 7855 Modem is the PIF file for the IBM
7855 modem.
When you create a PIF file for your modem, you must change certain
configuration values in the PIF file you are using as a template. Values you
may need to change appear in bold type in Sample PIF File for the IBM 7855
Modem.
Using the Port/Modem utility, you can change the configuration values for your
modem type by editing the fields on pages 1 and 2 of the Strings tab. See
Using the Port/Modem Utility.
Sample PIF File for the IBM 7855 Modem
[IBM7855]
DLL = WCLVPCM
Entry = StartVPCM
Autostart = YES
PIF = IBM7855.PIF
Title = "IBM 7855 Modem"
[Strings]
D1 = "Synchronicity"
D2 = "Modem Class"
D3 = "Auto Baud Detect"
D4 = "Serial Port Speed"
D5 = "Flow Control"
D10 = "First Initialization String"
D11 = "Second Initialization String"
D12 = "Dial Prefix String"
D13 = "Dial Suffix String"
D14 = "Success Response String"
D15 = "Failure Response String"
D16 = "Connection Prefix String"
D17 = "Connection Suffix String"
D18 = "Escape String"
D19 = "Hangup String"
D20 = "Ring Back String"
D21 = "Busy String"
D22 = "No Carrier String"
D23 = "No Dialtone String"
D24 = "No Answer String"
D25 = "Voice String"
D26 = "Ring String"
H2 = "Select the fastest modulation standard that the modem supports."
H3 = "If Auto Baud Detect is on, then the Port Manager will
automatically change the serial port speed to match the speed at
which the modems connect. If Auto Baud Detect is off, then the
serial port speed will remain fixed."
H4 = "Enter the speed at which the computer will communicate
with the modem. This speed may change if Auto Baud Detect is on."
H5 = "Select the type of flow control that is used to limit the
flow of data between the computer and the modem."
H10 = "This is the first initialization string that is sent
to the modem."
H11 = "This is the second initialization string that is sent
to the modem."
H12 = "This is the first part of the string that commands
the modem to dial a phone number. The dial prefix string is
followed by a phone number and the dial suffix string."
H13 = "This string finishes the dial command sent to the modem."
H14 = "The modem returns this response string if a
command is successful."
H15 = "The modem returns this response string if a
command is unsuccessful."
H16 = "This is the beginning of a connection response string
returned by the modem when a connection is successful."
H17 = "This is the end of the connection response string
returned by the modem."
H18 = "This is the escape sequence that is sent to modem to
bring the modem back to the command state."
H19 = "This string commands the modem to hang up the phone."
H20 = "The modem returns this response string when it
detects that the phone is ringing at the remote end."
H21 = "The modem returns this response string if the
phone is busy at the remote end."
H22 = "The modem returns this response string if the switched
connection is achieved, but no carrier signal is detected."
H23 = "The modem returns this response string if there is no
dial tone on the telephone line."
H24 = "The modem returns this response string if the remote
end did not answer the call."
H25 = "The modem returns this response string if the switched
connection is achieved, but a person answered the call."
H26 = "The modem returns this response string if an incoming
call is being received."
M1 = "Unspecified"
M2 = "V.22 1200 bps"
M3 = "V.22bis 2400 bps"
M4 = "V.32 9600 bps"
M5 = "V.32bis 14400 bps"
M6 = "Proprietary"
ON = "On"
OFF = "Off"
F1 = "None"
F2 = "RTS/CTS"
F3 = "XON/XOFF"
[DialogType]
Type = String
Default = "ATCMD.DDF"
Editable = NO
Paneled = NO
[Synchronicity]
Display = D1
Default = "Asynchronous"
Editable = NO
[ModemClass]
Display = D2
Type = String
Default = "V.32"
Set = M1, M2, M3, M4, M5, M6
SetValues = "Unspecified","V.22","V.22bis""V.32","V.32bis","Proprietary"
Optional = NO
Help = H2
[AutoBaudDetect]
Display = D3
Type = String
Default = "Off"
Set = ON, OFF
SetValues = "On","Off"
Optional = NO
Help = H3
[SerialPortSpeed]
Display = D4
Type = Decimal
Default = 19200
Range = 1200-115200
Optional = NO
Help = H4
[FlowControl]
Display = D5
Type = String
Default = "RTS/CTS"
Set = F1, F2, F3
Setvalues = "None","RTS/CTS","XON/XOFF"
Optional = NO
Help = H5
[Initialization1]
Display = D10
Type = String
StrLength = 255
Default = "ATI3\CR"
Optional = NO
Help = H10
[Initialization2]
Display = D11
Type = String
StrLength = 255
Default= "ATE1Q0V1X4S7=60S0=2\\R2.\\Q2\\X0.\\\N3\ \V1&D2&S1&R0&C1&IO\CR"
Optional = NO
Help = H11
[DialPrefix]
Display = D12
Type = String
StrLength = 255
Default = "ATDT"
Optional = NO
Help = H12
[DialSuffix]
Display = D13
Type = String
StrLength = 255
Default = "\CR"
Optional = NO
Help = H13
[Success]
Display = D14
Type = String
StrLength = 255
Default = "OK\CR\LF"
Optional = NO
Help = H14
[Failure]
Display = D15
Type = String
StrLength = 255
Default = "ERROR\CR\LF"
Optional = NO
Help = H15
[ConnectPrefix]
Display = D16
Type = String
StrLength = 255
Default = "CONNECT"
Optional = NO
Help = H16
[ConnectSuffix]
Display = D17
Type = String
StrLength = 255
Default = "\CR\LF"
Optional = NO
Help = H17
[Escape]
Display = D18
Type = String
StrLength = 255
Default = "+++"
Optional = NO
Help = H18
[Hangup]
Display = D19
Type = String
StrLength = 255
Default = "ATH\CR"
Optional = NO
Help = H19
[RingBack]
Display = D20
Type = String
StrLength = 255
Default = "RING\CR\LF"
Optional = NO
Help = H20
[Busy]
Display = D21
Type = String
StrLength = 255
Default = "BUSY\CR\LF"
Optional = NO
Help = H21
[NoCarrier]
Display = D22
Type = String
StrLength = 255
Default = "NO CARRIER\CR\LF"
Optional = NO
Help = H22
[NoDialtone]
Display = D23
Type = String
StrLength = 255
Default = "NO DIALTONE\CR\LF"
Optional = NO
Help = H23
[NoAnswer]
Display = D24
Type = String
StrLength = 255
Default = "NO ANSWER\CR\LF"
Optional = NO
Help = H24
[Voice]
Display = D25
Type = String
StrLength = 255
Default = "VOICE\CR\LF"
Optional = NO
Help = H25
[Ring]
Display = D26
Type = String
StrLength = 255
Default = "RING\CR\LF"
Optional = NO
Help = H26
ΓòÉΓòÉΓòÉ 23. Creating a Co-Processor Parameter File ΓòÉΓòÉΓòÉ
To set up your IBM Realtime Interface Co-Processor Multiport Adapter to use the
LAN Distance product, follow the instructions described in this section, then
complete the steps in Steps for Setting Up an ARTIC Adapter and Steps for
Setting Up an ARTIC Port.
The co-processor parameter file is an ASCII text file that defines values for
parameters used to configure your ARTIC co-processor adapter(s) that use AT bus
hardware. This file is used by the OS/2 device driver (ICARICIO.SYS) to
initialize the co-processor adapter.
ΓòÉΓòÉΓòÉ 23.1. Instructions for Creating the Co-Processor Parameter File ΓòÉΓòÉΓòÉ
Use any ASCII text editor to create the co-processor file for your IBM Realtime
Interface Co-Processor Multiport Adapter.
Name the co-processor file ICAPARM.PRM.
Save the ICAPARM.PRM file to the root directory of your boot drive.
For each co-processor adapter installed on your workstation, you must
include one line (record) of values to define the required parameters.
Example Co-Processor Parameter File shows a co-processor parameter file
with two records defined for a workstation with two co-processor
adapters.
The record for each co-processor adapter must:
- Begin with a "#" character and end with a ";" character, except the
last record, which must end with a "$" character. Records that do
not begin with a "#" character are treated as comments.
- Contain fields (02A0, 0, 6C, etc.) expressed in hexadecimal values
using upper- or lowercase characters.
- Use a space or comma to separate each field.
- Be listed in the correct order. The record order in the ICAPARM.PRM
file is associated with the logical card number for the co-processor
adapter.
In Example Co-Processor Parameter File, the first record (# 02A0...)
is associated with logical co-processor adapter 0, and the second
record (# 0AA0...) is associated with logical co-processor adapter
1.
Example Co-Processor Parameter File
# 02A0 0 6C 10 10 10 10 0F E010 ; First co-processor adapter
# 0AA0 0 6D 10 10 10 10 0F E010 $ Last co-processor adapter
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | Compare degate 1 and 0
| | | | | | | Compare degate 2
| | | | | | MAXTIME
| | | | | MAXQUEUE
| | | | MAXPRI
| | | MAXTASK
| | Page value
| Megabyte value
Co-processor adapter I/O address
ΓòÉΓòÉΓòÉ 23.2. Descriptions of Parameters for the Co-Processor File ΓòÉΓòÉΓòÉ
The parameters that you must include in the record for your co-processor
adapter are described in this section.
For more information about the parameters in this file, refer to The Realtime
Interface Co-Processor OS/2 Support 1.03 User's Guide(order number - S04G1029).
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Table 41. Descriptions of Parameters for the Co-Processor File Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé PARAMETER CHARACTERISTICS Γöé DEFINITION Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé CO-PROCESSOR ADAPTER BASE I/O Γöé This value is set by the switches on the Γöé
Γöé ADDRESS Γöé Interface Co-Processor Multiport Adapter, Γöé
Γöé Γöé Model 2. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Hex Value (Word) Γöé Physical Co-Processor Adapter Number Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 02A0h Γöé Co-Processor Adapter 0 Γöé
Γöé 06A0h Γöé Co-Processor Adapter 1 Γöé
Γöé 0AA0h Γöé Co-Processor Adapter 2 Γöé
Γöé 0EA0h Γöé Co-Processor Adapter 3 Γöé
Γöé 12A0h Γöé Co-Processor Adapter 4 Γöé
Γöé 16A0h Γöé Co-Processor Adapter 5 Γöé
Γöé 1AA0h Γöé Co-Processor Adapter 6 Γöé
Γöé 1EA0h Γöé Co-Processor Adapter 7 Γöé
Γöé 22A0h Γöé Co-Processor Adapter 8 Γöé
Γöé 26A0h Γöé Co-Processor Adapter 9 Γöé
Γöé 2AA0h Γöé Co-Processor Adapter 10 Γöé
Γöé 2EA0h Γöé Co-Processor Adapter 11 Γöé
Γöé 32A0h Γöé Co-Processor Adapter 12 Γöé
Γöé 36A0h Γöé Co-Processor Adapter 13 Γöé
Γöé 3AA0h Γöé Co-Processor Adapter 14 Γöé
Γöé 3EA0h Γöé Co-Processor Adapter 15 Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé MEGABYTE VALUE Γöé The megabyte value indicates which megabyte Γöé
Γöé Γöé of system unit storage is used for the co- Γöé
Γöé Γöé processor adapter's window. A megabyte Γöé
Γöé Γöé value of 0 indicates that the window is Γöé
Γöé Γöé located in the first megabyte of system unit Γöé
Γöé Γöé storage. A value of 1 indicates that the Γöé
Γöé Γöé window is located in the second megabyte of Γöé
Γöé Γöé system unit storage. Γöé
Γöé Γöé Γöé
Γöé Γöé See the description of the Page Value param- Γöé
Γöé Γöé eter regarding placement of the window. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Range (Byte) Γöé 00h - 0Fh Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé PAGE VALUE Γöé The page value is an offset (in increments Γöé
Γöé Γöé of 8 KB) within the megabyte specified by Γöé
Γöé Γöé the megabyte value. This value indicates Γöé
Γöé Γöé the location of the co-processor adapter's Γöé
Γöé Γöé shared storage window within the specified Γöé
Γöé Γöé megabyte. A page value of 0 indicates the Γöé
Γöé Γöé window is located at the beginning of the Γöé
Γöé Γöé megabyte specified by the megabyte value. Γöé
Γöé Γöé When assigning the location of the co- Γöé
Γöé Γöé processor, the adapter's shared storage Γöé
Γöé Γöé window should not overlap the window of Γöé
Γöé Γöé another co-processor adapter. In addition, Γöé
Γöé Γöé regions are 128 KB wide and are defined by Γöé
Γöé Γöé the type of memory devices that reside in Γöé
Γöé Γöé those regions. If a co-processor adapter is Γöé
Γöé Γöé configured as an 8-bit device, it cannot Γöé
Γöé Γöé reside in the same 128 KB region as an 8-bit Γöé
Γöé Γöé device. Conversely, if a co-processor Γöé
Γöé Γöé adapter is configured as a 16-bit device, it Γöé
Γöé Γöé cannot reside in the same 128 KB region as Γöé
Γöé Γöé an 8-bit device. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Range (Byte) Γöé 00h - 7Fh Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé MAXTASK Γöé This is the highest task number that can be Γöé
Γöé Γöé loaded on a given co-processor adapter. Γöé
Γöé Γöé Task 0 is reserved for the Realtime Control Γöé
Γöé Γöé Microcode. This value should be selected Γöé
Γöé Γöé carefully to avoid reserving unnecessary Γöé
Γöé Γöé space in the Realtime Control Microcode's Γöé
Γöé Γöé data area. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Range (Byte) Γöé 00h - F8h Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Recommended Hex Value Γöé 10 Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Table 41. Descriptions of Parameters for the Co-Processor File Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé PARAMETER CHARACTERISTICS Γöé DEFINITION Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé MAXPRI Γöé This is the highest priority level that may Γöé
Γöé Γöé be assigned to a task loaded on this co- Γöé
Γöé Γöé processor adapter. This value should be Γöé
Γöé Γöé selected carefully to avoid reserving unnec- Γöé
Γöé Γöé essary space in the Realtime Control Micro- Γöé
Γöé Γöé code's data area. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Range (Byte) Γöé 01h - FFh Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Recommended Hex Value Γöé 10 Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé MAXQUEUE Γöé This is the highest queue number available Γöé
Γöé Γöé for application tasks executing on the co- Γöé
Γöé Γöé processor adapter. This value should be Γöé
Γöé Γöé selected carefully to avoid reserving unnec- Γöé
Γöé Γöé essary space in the Realtime Control Micro- Γöé
Γöé Γöé code's data area. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Range (Byte) Γöé 00h - FEh Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Recommended Hex Value Γöé 10 Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé MAXTIME Γöé This is the highest timer number reserved Γöé
Γöé Γöé for application tasks executing on the given Γöé
Γöé Γöé co-processor adapter. This value should be Γöé
Γöé Γöé selected carefully to avoid reserving unnec- Γöé
Γöé Γöé essary space in the Realtime Control Micro- Γöé
Γöé Γöé code's data area. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Range (Byte) Γöé 00h - FEh Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Recommended Hex Value Γöé 10 Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé COMPARE DEGATE 2 Γöé When this address, in conjunction with Γöé
Γöé Γöé Compare Degate 1 and 0, is accessed by the Γöé
Γöé Γöé system unit, the co-processor adapter's Γöé
Γöé Γöé shared storage window automatically degates Γöé
Γöé Γöé from the system unit memory bus. If the Γöé
Γöé Γöé system unit architecture only supports 1 Γöé
Γöé Γöé megabyte of memory, this parameter is Γöé
Γöé Γöé limited to 00h - 0Fh. 00h - FFh is valid Γöé
Γöé Γöé only in a system designed for 16 megabytes Γöé
Γöé Γöé of memory. This field should have a value Γöé
Γöé Γöé of 0 to disable the feature. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Range (Byte) Γöé 00h - FFh Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Your System Unit Γöé Recommended Hex Value - Compare Degate 2 Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé IBM 5531, 7531, or 7532 IndustΓöéi0F Γöé
Γöé Computer; PC XT; PC AT; PS/2 Γöé Γöé
Γöé Model 25 or 30; IBM 5531, 7531Γöé Γöé
Γöé and 7532 Industrial Computer Γöé Γöé
Γöé Γöé Γöé
Γöé IBM 7552 Industrial Computer Γöé 0C Γöé
Γöé Γöé Γöé
Γöé IBM 7541, 7542, 7561, 7562 andΓöé Any Value Γöé
Γöé 7568 Industrial Computer; PS/2Γöé Γöé
Γöé Model 50, 50Z, 55, 60, 70, or Γöé0 Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé COMPARE DEGATE 1 AND 0 Γöé When this address, in conjunction with Γöé
Γöé Γöé Compare Degate 2, is accessed by the system Γöé
Γöé Γöé unit, the co-processor adapter automatically Γöé
Γöé Γöé degates its shared storage window from the Γöé
Γöé Γöé system unit bus. (See the description for Γöé
Γöé Γöé Compare Degate 2.) To disable this feature, Γöé
Γöé Γöé the field has a value of 0. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Range (Word) Γöé 0000h - FFFFh Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Your System Unit Γöé Recommended Hex Value - Compare Degate 1 and Γöé
Γöé Γöé 0 Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Table 41. Descriptions of Parameters for the Co-Processor File Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé PARAMETER CHARACTERISTICS Γöé DEFINITION Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé IBM 5531, 7531, or 7532 IndustΓöéiE010 Γöé
Γöé Computer; PC XT; PC AT; PS/2 Γöé Γöé
Γöé Model 25 or 30; IBM 5531, 7531Γöé Γöé
Γöé and 7532 Industrial Computer Γöé Γöé
Γöé Γöé Γöé
Γöé IBM 7552 Industrial Computer Γöé 0000 Γöé
Γöé Γöé Γöé
Γöé IBM 7541, 7542, 7561, 7562 andΓöé Any Value Γöé
Γöé 7568 Industrial Computer; PS/2Γöé Γöé
Γöé Model 50, 50Z, 55, 60, 70, or Γöé0 Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓòÉΓòÉΓòÉ 24. Example System Configuration Files ΓòÉΓòÉΓòÉ
This appendix contains configuration file samples for a LAN Distance Connection
Server, an OS/2 LAN Distance Remote, and a MS Windows LAN Distance Remote.
ΓòÉΓòÉΓòÉ 24.1. Example PROTOCOL.INI for a LAN Distance Connection Server ΓòÉΓòÉΓòÉ
[PROT_MAN]
DRIVERNAME = PROTMAN$
[VLAN_KERNEL]
DRIVERNAME = VLANKNL$
CFGTYPE = "Locked"
MODE = "LEARN_WFLOWS"
LANTYPE = "802.5"
MAXADDRESSES = 3500
[sr_bridge]
DriverName = BRIDGE$
Bridgenum = 15
Maxframe = 2052
Spanningtree = NO
CfgType = "Locked"
Bindings = IBMTOK_nifB,BRIDGEFH
Ringnum = 0xA52,0x222
Maxhopcount = 6,3
Filtercriteria = Criteria_
Prionbindings = IBMTOK_nif,PDFH_nif
[BRIDGEFH]
DriverName = LANFH$01
CfgType = "Locked"
[ARTIC0000]
DriverName = WCLARMC$
CFGTYPE = "LOCKED"
RICCARDTYPE = 3
RICMICROCODE = "C:\ICA\ICARCM.COM"
RICMACCODE = "C:\IBMCOM\WCLARTSK.EXE"
RICCARDNO = 0
RICPORTNO = 0
RICTASKNO = 255
RICPORTTYPE = 0
LINEPROTOCOL = 1
NRZI = 1
RTS = 0
RTSDROPDELAY = 0
CLOCKING = 1
LINESPEED = "9600"
MAXFRAMESIZE = 2088
MAXTRANSMITS = 6
MAXRECEIVES = 6
OUTBOARDDLC = 0
PCMSUPPORT = 1
CONNTYPE = 1
PORTNAME = "ARTIC0000"
[ARTIC0001]
DriverName = WCLARMC$
CFGTYPE = "LOCKED"
RICCARDTYPE = 3
RICMICROCODE = "C:\ICA\ICARCM.COM"
RICMACCODE = "C:\IBMCOM\WCLARTSK.EXE"
RICCARDNO = 0
RICPORTNO = 1
RICTASKNO = 255
RICPORTTYPE = 0
LINEPROTOCOL = 1
NRZI = 1
RTS = 0
RTSDROPDELAY = 0
CLOCKING = 1
LINESPEED = "9600"
MAXFRAMESIZE = 2088
MAXTRANSMITS = 6
MAXRECEIVES = 6
OUTBOARDDLC = 0
PCMSUPPORT = 1
CONNTYPE = 1
PORTNAME = "ARTIC0001"
[ARTIC0002]
DriverName = WCLARMC$
CFGTYPE = "LOCKED"
RICCARDTYPE = 3
RICMICROCODE = "C:\ICA\ICARCM.COM"
RICMACCODE = "C:\IBMCOM\WCLARTSK.EXE"
RICCARDNO = 0
RICPORTNO = 2
RICTASKNO = 255
RICPORTTYPE = 0
LINEPROTOCOL = 1
NRZI = 1
RTS = 0
RTSDROPDELAY = 0
CLOCKING = 1
LINESPEED = "9600"
MAXFRAMESIZE = 2088
MAXTRANSMITS = 6
MAXRECEIVES = 6
OUTBOARDDLC = 0
PCMSUPPORT = 1
CONNTYPE = 1
PORTNAME = "ARTIC0002"
[ARTIC0003]
DriverName = WCLARMC$
CFGTYPE = "LOCKED"
RICCARDTYPE = 3
RICMICROCODE = "C:\ICA\ICARCM.COM"
RICMACCODE = "C:\IBMCOM\WCLARTSK.EXE"
RICCARDNO = 0
RICPORTNO = 3
RICTASKNO = 255
RICPORTTYPE = 0
LINEPROTOCOL = 1
NRZI = 1
RTS = 0
RTSDROPDELAY = 0
CLOCKING = 1
LINESPEED = "9600"
MAXFRAMESIZE = 2088
MAXTRANSMITS = 6
MAXRECEIVES = 6
OUTBOARDDLC = 0
PCMSUPPORT = 1
CONNTYPE = 1
PORTNAME = "ARTIC0003"
[ARTIC0004]
DriverName = WCLARMC$
CFGTYPE = "LOCKED"
RICCARDTYPE = 3
RICMICROCODE = "C:\ICA\ICARCM.COM"
RICMACCODE = "C:\IBMCOM\WCLARTSK.EXE"
RICCARDNO = 0
RICPORTNO = 4
Value Changed
RICTASKNO = 5
Value Changed
RICPORTTYPE = 0
LINEPROTOCOL = 1
NRZI = 1
RTS = 0
RTSDROPDELAY = 0
CLOCKING = 1
LINESPEED = "9600"
MAXFRAMESIZE = 2088
MAXTRANSMITS = 6
MAXRECEIVES = 6
OUTBOARDDLC = 0
PCMSUPPORT = 1
CONNTYPE = 1
PORTNAME = "ARTIC0004"
[ARTIC0005]
DriverName = WCLARMC$
CFGTYPE = "LOCKED"
RICCARDTYPE = 3
RICMICROCODE = "C:\ICA\ICARCM.COM"
RICMACCODE = "C:\IBMCOM\WCLARTSK.EXE"
RICCARDNO = 0
RICPORTNO = 5
RICTASKNO = 255
RICPORTTYPE = 0
LINEPROTOCOL = 1
NRZI = 1
RTS = 0
RTSDROPDELAY = 0
CLOCKING = 1
LINESPEED = "9600"
MAXFRAMESIZE = 2088
MAXTRANSMITS = 6
MAXRECEIVES = 6
OUTBOARDDLC = 0
PCMSUPPORT = 1
CONNTYPE = 1
PORTNAME = "ARTIC0005"
[ARTIC0006]
DriverName = WCLARMC$
CFGTYPE = "LOCKED"
RICCARDTYPE = 3
RICMICROCODE = "C:\ICA\ICARCM.COM"
RICMACCODE = "C:\IBMCOM\WCLARTSK.EXE"
RICCARDNO = 0
RICPORTNO = 6
RICTASKNO = 255
RICPORTTYPE = 0
LINEPROTOCOL = 1
NRZI = 1
RTS = 0
RTSDROPDELAY = 0
CLOCKING = 1
LINESPEED = "9600"
MAXFRAMESIZE = 2088
MAXTRANSMITS = 6
MAXRECEIVES = 6
OUTBOARDDLC = 0
PCMSUPPORT = 1
CONNTYPE = 1
PORTNAME = "ARTIC0006"
[ARTIC0007]
DriverName = WCLARMC$
CFGTYPE = "LOCKED"
RICCARDTYPE = 3
RICMICROCODE = "C:\ICA\ICARCM.COM"
RICMACCODE = "C:\IBMCOM\WCLARTSK.EXE"
RICCARDNO = 0
RICPORTNO = 7
RICTASKNO = 255
RICPORTTYPE = 0
LINEPROTOCOL = 1
NRZI = 1
RTS = 0
RTSDROPDELAY = 0
CLOCKING = 1
LINESPEED = "9600"
MAXFRAMESIZE = 2088
MAXTRANSMITS = 6
MAXRECEIVES = 6
OUTBOARDDLC = 0
PCMSUPPORT = 1
CONNTYPE = 1
PORTNAME = "ARTIC0007"
[IBMLXCFG]
NETBEUI_nif = netbeui.nif
PDFH_nif = PDFH.NIF
IBMTOK_nif = IBMTOK.NIF
[NETBEUI_nif]
DriverName = netbeui$
Bindings = PDFH_nif,IBMTOK_nif
ETHERAND_TYPE = IBM Corporation"
USEADDRREV = "YES"
OS2TRACEMASK = 0xFFFF
SESSIONS = 64
NCBS = 100
NAMES = 40
SELECTORS = 5
USEMAXDATAGRAM = "NO"
ADAPTRATE = 1000
WINDOWERRORS = 0
MAXDATARCV = 4168
TI = 60000
T1 = 10000
T2 = 2000
MAXIN = 1
MAXOUT = 1
NETBIOSTIMEOUT = 1500
NETBIOSRETRIES = 8
NAMECACHE = 0
PIGGYBACKACKS = 1
DATAGRAMPACKETS = 2
PACKETS = 350
LOOPPACKETS = 1
PIPELINE = 5
MAXTRANSMITS = 6
MINTRANSMITS = 2
DLCRETRIES = 10
[PDFH_nif]
DriverName = PDFH$
NETADDRESS = "t4000412E068A"
[IBMTOK_nif]
DriverName = IBMTOK$
ADAPTER = "PRIMARY"
MAXTRANSMITS = 6
RECVBUFS = 2
RECVBUFSIZE = 256
XMITBUFS = 1
ENABLEBRIDGE
[Criteria_]
VALID_SADDRS = t10005A8B1278,t10005AAC3CD8,t400015000082
ΓòÉΓòÉΓòÉ 24.1.1. Example WCLNET.INI for a LAN Distance Connection Server ΓòÉΓòÉΓòÉ
[DONOTREMOVE]
KEYWORD = VALUE
[REMOTELAN01]
DLL = WCLVPCM
ENTRY = StartVPCM
AUTOSTART = YES
PIF = OPTIMA14.PIF
TITLE = Hayes Optima 14400 Modem
PCMNAME = OPTIMA14
[OPTIMA14]
DialogType = "ATCMD.DDF"
PortName = "ARTIC0000","ARTIC0001","ARTIC0002","ARTIC0003","ARTIC0004",
"ARTIC0005","ARTIC0006","ARTIC0007"
PermConnection = "NO","NO","NO","NO","NO","NO","NO","NO"
PhoneNumber = "5-0209","5-0210","5-0211","5-0212","5-0213","5-0214",
"5-0215", "5-0216"
Synchronicity = "Asynchronous"
ModemClass = "V.32bis"
AutoBaudDetect = "Off"
SerialPortSpeed = 38400
FlowControl = "RTS/CTS"
Initialization1 = "ATI0\CR"
Initialization2 = "ATE1Q0V1M1N1W2X4Y0&C1&D2&K3&Q5&R0&S1&T5S7=60S0=2S37=0\CR"
DialPrefix = "ATDT"
DialSuffix = "\CR"
Success = "OK\CR\LF"
Failure = "ERROR\CR\LF"
ConnectPrefix = "CONNECT"
ConnectSuffix = "\CR\LF"
Escape = "+++"
Hangup = "ATH\CR"
RingBack = "RING\CR\LF"
Busy = "BUSY\CR\LF"
NoCarrier = "NO CARRIER\CR\LF"
NoDialtone = "NO DIALTONE\CR\LF"
NoAnswer = "NO ANSWER\CR\LF"
Voice = "VOICE\CR\LF"
Ring = "RING\CR\LF"
ΓòÉΓòÉΓòÉ 24.1.2. Example CONFIG.SYS for a LAN Distance Connection Server ΓòÉΓòÉΓòÉ
IFS=C:\OS2\HPFS.IFS /CACHE:64 /CRECL:4
PROTSHELL=C:\OS2\PMSHELL.EXE
SET USER_INI=C:\OS2\OS2.INI
SET SYSTEM_INI=C:\OS2\OS2SYS.INI
SET OS2_SHELL=C:\OS2\CMD.EXE
SET AUTOSTART=PROGRAMS,TASKLIST,FOLDERS,CONNECTIONS
SET RUNWORKPLACE=C:\OS2\PMSHELL.EXE
SET COMSPEC=C:\OS2\CMD.EXE
LIBPATH=C:\IBMCOM\DLL;C:\IBMLAN\NETLIB;C:\MUGLIB\DLL;C:\OS2\DLL;C:\OS2\MDOS;C:\;C:\OS2\APPS\DLL;
C:\ICA;C:\WAL\DLL;
SET PATH=C:\IBMLAN\NETPROG;C:\MUGLIB;C:\OS2;C:\OS2\SYSTEM;C:\OS2\MDOS\WINOS2;C:\OS2\INSTALL;C:\;
C:\OS2\MDOS;C:\OS2\APPS;C:\ICA;C:\WAL;
SET DPATH=C:\IBMCOM;C:\IBMLAN\NETPROG;C:\IBMLAN;C:\MUGLIB;C:\OS2;C:\OS2\SYSTEM;C:\OS2\MDOS\WINOS2;
C:\OS2\INSTALL;C:\;C:\OS2\BITMAP;C:\OS2\MDOS;C:\OS2\APPS;C:\ICA;C:\WAL;
SET PROMPT=$i[$p]
SETHELP=C:\OS2\HELP;C:\OS2\HELP\TUTORIAL;C:\WAL;
SET GLOSSARY=C:\OS2\HELP\GLOSS;
SET IPF_KEYS=SBCS
PRIORITY_DISK_IO=YES
FILES=20
DEVICE=C:\IBMCOM\LANMSGDD.OS2/I:C:\IBMCOM
DEVICE=C:\IBMCOM\PROTMAN.OS2I:C:\IBMCOM
DEVICE=C:\IBMCOM\PROTOCOL\LANPDD.OS2
DEVICE=C:\IBMCOM\PROTOCOL\LANVDD.OS2
DEVICE=C:\OS2\TESTCFG.SYS
DEVICE=C:\OS2\DOS.SYS
DEVICE=C:\OS2\PMDD.SYS
BUFFERS=30
IOPL=YES
DISKCACHE=1024,LW,AC
MAXWAIT=3
MEMMAN=SWAP,PROTECT
SWAPPATH=C:\OS2\SYSTEM. 2048 2048
BREAK=OFF
THREADS=256
PRINTMONBUFSIZE=134,134,134
COUNTRY=001,C:\OS2\SYSTEM\COUNTRY.SYS
SET KEYS=ON
REM SET DELDIR=C:\DELETE,512;D:\DELETE,512;E:\DELETE,512;
BASEDEV=PRINT02.SYS
BASEDEV=IBM2FLPY.ADD
BASEDEV=IBM2SCSI.ADD /LED
BASEDEV=OS2DASD.DMD
SET BOOKSHELF=C:\IBMLAN\BOOK;C:\OS2\BOOK;
SET EPMPATH=C:\OS2\APPS;
REM DEVICE=C:\OS2\APPS\SASYNCDB.SYS
PROTECTONLY=NO
SHELL=C:\OS2\MDOS\COMMAND.COM
C:\OS2\MDOS
FCBS=16,8
RMSIZE=640
DEVICE=C:\
OS2\MDOS\VEMM.SYS
DOS=LOW,NOUMB
DEVICE=C:\OS2\MDOSV\DPX.SYS
DEVICE=C:\OS2\MDOSV\XMS.SYS /UMB
DEVICE=C:\OS2\MDOS\VDPMI.SYS
DEVICE=C:\OS2\MDOS\VCDROM.SYS
DEVICE=C:\OS2\MDOS\VWIN.SYS
DEVICE=C:\OS2\PCMCIA.SYS
DEVICE=C:\OS2\MDOS\VPCMCIA.SYS
DEVICE=C:\OS2\MDOS\VMOUSE.SYS
DEVICE=C:\OS2\POINTDD.SYS
DEVICE=C:\OS2\MOUSE.SYS
DEVICE=C:\OS2\COM.SYS
DEVICE=C:\OS2\MDOS\VCOM.SYS
CODEPAGE=437,850
DEVINFO=KBD,US,C:OS2\KEYBOARD.DCP
BASEDEV=XGA.SYS
DEVICE=C:\OS2\XGARING0.SYS
DEVINFO=SCR,VGA,C:\OS2\VIOTBL.DCP
SET VIDEO_DEVICES=VIO_XGA
SET VIO_XGA=DEVICE(BVHVGA,BVHXGA)
DEVICE=C:\
OS2\MDOS\VVGA.SYS
DEVICE=C:\OS2\MDOS\VXGA.SYS
**********************************************************
***Add if NetBIOS not already added
**********************************************************
DEVICE=C:\IBMCOM\PROTOCOL\NETBEUI.OS2
DEVICE=C:\IBMLAN\NETPROG\RDRHELP.200
IFS=C:\IBMLAN\NETPROG\NETWKSTA.200 / I:C:\IBMLAN /N
DEVICE=C:\IBMCOM\PROTOCOL\NETBIOS.OS2
RUN=C:\OS2\EPW.EXE
**************************************************************
*** ARTIC installation
**************************************************************
DEVICE=C:\ICA\ICARICIO.SYS
RUN=C:\ICA\ICARICCT.EXE -32
RUN=C:\
IBMLAN\NETPROG\LSDAEMON.EXE
RUN=C:\OS2\SYSTEM\LOGDAEM.EXE
RUN=C:\OS2\EPWROUT.EXE 1
DEVICE=C:\OS2\LOG.SYS
****************************************************
*** Add for LAN Distance
****************************************************
DEVICE=C:\WAL\WCLVPCM.OS2
DEVICE=C:\IBMCOM\MEMMAN.OS2
DEVICE=C:\IBMCOM\VLAN.OS2
RUN=C:\IBMCOM\VLANINIT.EXE
DEVICE=C:\IBMCOM\MACS\PDFH.OS2
DEVICE=C:\IBMCOM\MACS\MACFH.OS2RUN=C:\IBMCOM\WCLLDRIC.EXE
RUN=C:\IBMCOM\PROTOCOL\NETBIND.EXE
RUN=C:\IBMCOM\LANMSGEX.EXE
DEVICE=C:\IBMCOM\MACS\BRIDGEFH.OS2
DEVICE=C:\IBMCOM\PROTOCOL\BRIDGE.OS2
DEVICE=C:\IBMCOM\MACS\IBMTOK.OS2
DEVICE=C:\IBMCOM\MACS\WCLARMAC.OS2
ΓòÉΓòÉΓòÉ 24.2. OS/2 LAN Distance Remote Configuration Files ΓòÉΓòÉΓòÉ
ΓòÉΓòÉΓòÉ 24.2.1. Example PROTOCOL.INI for a LAN Distance Remote ΓòÉΓòÉΓòÉ
[PROT_MAN]
DriverName = PROTMAN$
[VLAN_KERNEL]
DRIVERNAME = VLANKNL$
CFGTYPE = "Locked"
MODE = "LEARN_WFLOWS"
LANTYPE = "802.5"
MAXADDRESSES = 512
[COM1]
DRIVERNAME = WCLCPMC$
CFGTYPE = "LOCKED"
PCMSUPPORT = "YES"
MACTYPE = "802.5"
CONN_TYPE = "SWITCHED"
PORTNAME = "COM1"
[IBMLXCFG]
LANDD_nif = LANDD.NIF
NETBEUI_nif = NETBEUI.NIF
ODI2NDI_nif = ODI2NDI.NIF
TCPIP_nif = TCPIP.NIF
PDFH_nif = PDFH.NIF
[LANDD_nif]
DriverName = LANDD$
Bindings = PDFH_nif
ETHERAND_TYPE = "I"
SYSTEM_KEY = 0x0
OPEN_OPTIONS = 0x2000
TRACE = 0x0
LINKS = 8
MAX_SAPS = 3
MAX_G_SAPS = 0
USERS = 3
TI_TICK_G1 = 255
T1_TICK_G1 = 15
T2_TICK_G1 = 3
TI_TICK_G2 = 255
T1_TICK_G2 = 25
T2_TICK_G2 = 10
IPACKETS = 250
UIPACKETS = 100
MAXTRANSMITS = 6
MINTRANSMITS = 2
TCBS = 64
GDTS = 30
ELEMENTS = 800
[NETBEUI_nif]
DriverName = netbeui$
Bindings = PDFH_nif
ETHERAND_TYPE = IBM Corporation"
USEADDRREV = "YES"
OS2TRACEMASK = 0x0
SESSIONS = 70
NCBS = 125
NAMES = 51
SELECTORS = 5
USEMAXDATAGRAM = "NO"
ADAPTRATE = 1000
WINDOWERRORS = 0
MAXDATARCV = 512
TI = 60000
T1 = 10000
T2 = 2000
MAXIN = 1
MAXOUT = 1
NETBIOSTIMEOUT = 500
NETBIOSRETRIES = 8
NAMECACHE = 0
PIGGYBACKACKS = 1
DATAGRAMPACKETS = 2
PACKETS = 350
LOOPPACKETS = 1
PIPELINE = 5
MAXTRANSMITS = 6
MINTRANSMITS = 2
DLCRETRIES = 5
[ODI2NDI_nif]
DriverName = odi2ndi$
Bindings = PDFH_nif
NETADDRESS = "T4000000000AA"
TOKEN-RING = "yes"
TOKEN-RING_SNAP = "no"
ETHERNET_802.3 = "no"
ETHERNET_802.2 = "no"
ETHERNET_II = "no"
ETHERNET_SNAP = "no"
TRACE = 0x0
[TCPIP_nif]
DriverName = TCPIP$
Bindings = PDFH_nif
[PDFH_nif]
DriverName = PDFH$
NETADDRESS = "4000000000AA"
ΓòÉΓòÉΓòÉ 24.2.2. Example WCLNET.INI for a LAN Distance Remote ΓòÉΓòÉΓòÉ
[DONOTREMOVE]
KEYWORD = VALUE
[REMOTELAN01]
DLL = WCLVPCM
Entry = StartVPCM
Autostart = YES
PIF = OPTIMA14.PIF
Title = "Hayes Optima 14400 Modem"
PCMNAME = OPTIMA14
[OPTIMA14]
PortName = COM1
PermConnection = No
PhoneNumber = "Unspecified"
DialogType = "ATCMD.DDF"
Synchronicity = "Asynchronous"
ModemClass = "V.32bis"
AutoBaudDetect = "Off"
SerialPortSpeed = 38400
FlowControl = "RTS/CTS"
Initialization1 = "ATI0\"
Initialization2 ="ATE1Q0V1M1N1S95=40X4Y0&C1&D2&K3&Q5&R0&S1&T5S7=60S0=2S37=0\CR"
DialPrefix = "ATDT"
DialSuffix = "\CR"
[OPTIMA14], continued
Success = "OK\CR\LF"
Failure = "ERROR\CR\LF"
ConnectPrefix = "CONNECT"
ConnectSuffix = "\CR\LF"
Escape = "+++"
Hangup = "ATH\CR"
RingBack = "RING\CR\LF"
Busy = "BUSY\CR\LF"
NoCarrier = "NO CARRIER\CR\LF"
NoDialtone = "NO DIALTONE\CR\LF"
NoAnswer = "NO ANSWER\CR\LF"
Voice = "VOICE\CR\LF"
Ring = "RING\CR\LF"
ΓòÉΓòÉΓòÉ 24.2.3. Example CONFIG.SYS for a LAN Distance Remote ΓòÉΓòÉΓòÉ
IFS=D:\OS2\HPFS.IFS /CACHE:64 /CRECL:4
DEVICE=D:\IBMCOM\LANMSGDD.OS2DEVICE=D:\IBMCOM\PROTMAN.OS2DEVICE=D:\IBMCOM\PROTOCOL\LANDD.OS2
DEVICE=D:\IBMCOM\PROTOCOL\LANDLLDD.OS2
DEVICE=E:\CMLIB\R0CSDD.SYS
DEVICE=D:\IBMCOM\PROTOCOL\LANPDD.OS2
DEVICE=D:\IBMCOM\PROTOCOL\LANVDD.OS2
PROTSHELL=D:\OS2\PMSHELL.EXE
SET USER_INI=D:\OS2\OS2.INI
SET SYSTEM_INI=D:\OS2\OS2SYS.INI
SET OS2_SHELL=D:\OS2\CMD.EXE
SET AUTOSTART=PROGRAMS,TASKLIST,FOLDERS,CONNECTIONS
SET RESTARTOBJECTS=NO
SET RUNWORKPLACE=D:\OS2\PMSHELL.EXE
SET COMSPEC=D:\OS2\CMD.EXE
LIBPATH=D:\IBMCOM\DLL;D:\MUGLIB\DLL;D:\IBMLAN\NETLIB;.;D:\OS2\DLL;D:\OS2\
MDOS;D:\;D:\OS2\APPS\DLL;E:NOTES;E:\NETWARE;E:\TCPIP\DLL;
E:\CMLIB\DLL;Y:\;E:\WAL\DLL;
SET PATH=D:\IBMLAN\NETPROG;D:\MUGLIB;D:\OS2;D:\OS2\SYSTEM;D:\OS2\MDOS\
WINOS2;D:\OS2\INSTALL;D:\;D:\OS2\MDOS;D:\OS2\APPS;E:\NOTES;L:\OS2;
P:\OS2;E:\NETWARE;E:\TCPIP\BIN;D:\IBMCOM;E:\CMLIB;E:\WAL;
SET DPATH=D:\IBMCOM;D:\IBMLAN\NETPROG;D:\IBMLAN;D:\MUGLIB;D:\OS2;D:\OS2\SYSTEM;
D:\OS2\MDOS\WINOS2;D:\OS2\INSTALL;D:\;D:\OS2\BITMAP;D:\OS2\MDOS;
D:\OS2\APPS;E:\NETWARE;E:\CMLIB;E:\WAL;
SET PROMPT=$i[$p]
HELP\TUTORIAL;E:\TCPIP\HELP;E:\CMLIB;E:\WAL;
SET GLOSSARY=D:\OS2\HELP\GLOSS;
SET IPF_KEYS=SBCS
PRIORITY_DISK_IO=YES
FILES=20
TRACEBUF=63
DEVICE=D:\OS2\TESTCFG.SYS
DEVICE=D:\OS2\DOS.SYS
DEVICE=D:\OS2\PMDD.SYS
BUFFERS=30
IOPL=YES
DISKCACHE=2048,LW,AC:D
MAXWAIT=3
MEMMAN=SWAP,PROTECT
SWAPPATH=D:\OS2\SYSTEM 2048 2048
BREAK=OFF
THREADS=256
PRINTMONBUFSIZE=134,134,134 COUNTRY=001,D:\OS2\SYSTEM\COUNTRY.SYS
SET KEYS=ON
REM SET DELDIR=C:\DELETE,512;D:\DELETE,512;E:\DELETE,512;
BASEDEV=PRINT02.SYS
BASEDEV=IBM2FLPY.ADD
BASEDEV=IBM2SCSI.ADD /LED
BASEDEV=OS2DASD.DMD
SET BOOKSHELF=D:\IBMLAN\BOOK;D:\OS2\BOOK;E:\CMLIB\BOOK;
SET EPMPATH=D:\OS2\APPS;
REM DEVICE=D:\OS2\APPS\SASYNCDB.SYS
PROTECTONLY=NO
SHELL=D:\OS2\MDOS\COMMAND.COM D:\OS2\MDOS
FCBS=16,8
RMSIZE=640
DEVICE=D:\OS2\MDOS\VEMM.SYS
DOS=LOW,NOUMB
DEVICE=D:\OS2\MDOS\VDPX.SYS
DEVICE=D:\OS2\MDOS\VXMS.SYS /UMB
DEVICE=D:\OS2\MDOS\VDPMI.SYS
DEVICE=D:\OS2\MDOS\VCDROM.SYS
DEVICE=D:\OS2\MDOS\VWIN.SYS
REM DEVICE=D:\OS2\PCMCIA.SYS
REM DEVICE=D:\OS2\MDOS\VPCMCIA.SYS
DEVICE=D:\OS2\MDOS\MOUSE.SYS
DEVICE=D:\OS2\POINTDD.SYS
DEVICE=D:\OS2\MOUSE.SYS
DEVICE=D:\OS2\COM.SYS
DEVICE=D:\OS2\VCOM.SYS
CODEPAGE=437,850
DEVINFO=KBD,US,D:\OS2\KEYBOARD.DCP
DEVINFO=SCR,VGA,D:\OS2\VIOTBL.DCP
SET VIDEO_DEVICES=VIO_VGA
SET VIO_VGA=DEVICE(BVHVGA)
DEVICE=D:\OS2\MDOS\VVGA.SYS DEVICE=D:\IBMCOM\PROTOCOL\NETBEUI.OS2
DEVICE=D:\IBMLAN\NETPROG\RDRHELP.200
***************************************************************
***REM--- NetWare Requester statements BEGIN ---
***************************************************************
DEVICE=E:\NETWARE\LSL.SYS RUN=E:\NETWARE\DDAEMON.EXE
DEVICE = D:\IBMCOM\PROTOCOL\ODI2NDI.OS2
REM DEVICE=E:\NETWARE\TOKEN.SYS
DEVICE=E:\NETWARE\ROUTE.SYS
DEVICE=E:\NETWARE\IPX.SYS
REM DEVICE=E:\NETWARE\SPX.SYS
REM RUN=E:\NETWARE\SPDAEMON.EXE
REM DEVICE=E:\NETWARE\NMPIPE.SYS
REM DEVICE=E:\NETWARE\NPSERVER.SYS
REM RUN=E:\NETWARE\NPDAEMON.EXE NP_COMPUTERNAME
DEVICE=E:\NETWARE\NWREQ.SYS
IFS=E:\NETWARE\NWIFS.IFS
******************************************************************
***REM --- Comment the next line out if running Tbird
***REM --- Then execute DETACH
***REM --- After Connection has established with the Tbird Server
******************************************************************
E:\NETWARE\NWDAEMON.EXE
REM RUN=E:\NETWARE\NWDAEMON.EXE
REM DEVICE=E:\NETWARE\NETBIOS.SYS
REM RUN=E:\NETWARE\NBDAEMON.EXE
DEVICE=E:\NETWARE\VIPX.SYS
DEVICE=E:\NETWARE\VSHELL.SYS
*******************************************************************
***REM --- NetWare Requester statements END ---
*******************************************************************
IFS=D:\IBMLAN\NETPROG\NETWKSTA.200/I:D:\IBMLAN /N
DEVICE=D:\IBMCOM\PROTOCOL\NETBIOS.OS2
RUN=D:\IBMLAN\NETPROG\LSDAEMON.EXE
DEVICE=D:\OS2\LOG.SYS
DEVICE=D:\IBMCOM\PROTOCOL\INET.SYS
DEVICE=D:\IBMCOM\PROTOCOL\IFNDIS.SYS
RUN=D:\OS2\SYSTEM\LOGDAEM.EXE
RUN=D:\OS2\EPWROUT.EXE 1
RUN=D:\OS2\EPW.EXE
SET ETC=E:\TCPIP\ETC
SET TMP=E:\TCPIP\TMP
RUN=E:\TCPIP\BIN\CNTRL.EXE
IFS=E:\TCPIP\BIN\NFS200.IFS
SET TELNET.PASSWORD.ID=dragon
SET HOSTNAME=host1
DEVICE=E:\
CMLIB\ACSLANDD.SYS
DEVICE=E:\CMLIB\CMKFMDE.SYS
SET DRVLTR=D
RUN=D:\IBMCOM\PROTOCOL\LANDLL.EXE
RUN=D:\IBMCOM\PROTOCOL\NETBIND.EXE
RUN=D:\IBMCOM\LANMSGEX.EXE
DEVICE=E:\WAL\WCLVPCM.OS2
DEVICE=D:\IBMCOM\MEMMAN.OS2
DEVICE=D:\IBMCOM\VLAN.OS2
RUN=D:\IBMCOM\VLANINIT.EXE
DEVICE=D:\IBMCOM\MACS\MACFH.OS2
DEVICE=D:\IBMCOM\MACS\WCLCPMAC.OS2
DEVICE=D:\IBMCOM\MACS\PDFH.OS2
ΓòÉΓòÉΓòÉ 24.3. MS Windows LAN Distance Remote Configuration Files ΓòÉΓòÉΓòÉ
ΓòÉΓòÉΓòÉ 24.3.1. Example PROTOCOL.INI for a MS Windows LAN Distance Remote ΓòÉΓòÉΓòÉ
[PROTOCOL_MANAGE]
DriverName=PROTMAN$
[NETBEUI]
DriverName=NETBEUI$
Bindings=SOCKDD_MOD
NCBS=32
Sessions=32
Names=17
MaxDatarcv=4168
MaxTransmits=6
TI=60000
T1=10000
T2=2000
[DXME0_NIF]
DriverName = DXME0$
Bindings=SOCKDD_MOD
[IBM_TCPIP_V21]
DriverName=DOSNDIS$
Bindings=SOCKDD_MOD
[SOCKDD_MOD]
DriverName=VLANMAC$
LanType="TokenRing"
Mode="Flows"
MaxFrame=618
ΓòÉΓòÉΓòÉ 24.3.2. Example AUTOEXEC.BAT for a MS Windows LAN Distance Remote ΓòÉΓòÉΓòÉ
@ECHO OFF
C:\WAL\DOSBIND
SET ETC=D:\TCPDOS\ETC
LH /L:0;3,42432/S C:\DOS\SMARTDRV.EXE
LH /L:2,6400 C:\DOS\DOSKEY
PROMPT $P$G
PATH C:\WAL;C:\WINDOWS;C:\DOSLAN;C:\DOS;C:\TOOLS;D:\NOTES;D:\TCPDOS\BIN;
SET TEMP=C:\DOS
NET START
CALL TCPSTART
ΓòÉΓòÉΓòÉ 24.3.3. Example CONFIG.SYS for a MS Windows LAN Distance Remote ΓòÉΓòÉΓòÉ
DEVICE=C:\DOS\HIMEM.SYS
DEVICE=C:\DOS\EMM386.EXE NOEMS HIGHSCANX=D800-DBFFX=CC00-CDFF
BUFFERS=10
FILES=40
DOS=UMB
LASTDRIVE=Z
FCBS=4,0
DEVICEHIGH /L:2,12048 =C:\DOS\SETVER.EXE
DOS=HIGH
SHELL=C:\COMMAND.COM /E:2000 /P
STACKS=9,256
DEVICEHIGH=C:\DOS\ANSI.SYS
DEVICE=C:\WAL\PROTMAN.DOS/I: C:\WAL
DEVICE=C:\LSP\DXMA0MOD.SYS
DEVICEHIGH=C:\WAL\DXMJ0MOD.SYS
DEVICE=C:\LSP\DXME0MOD.SYS
DEVICEHIGH=C:\WAL\DOSVMAC.SYS
DEVICEHIGH=C:\WAL\PCMDD.SYS
DEVICEHIGH=D:\TCPDOS\BIN\DOSTCP.SYS
ΓòÉΓòÉΓòÉ 25. Security Database Tools ΓòÉΓòÉΓòÉ
This appendix discusses the security database tools available in LAN Distance
5.0.
The LAN Distance Security Database Tools allow the LAN Distance security
administrator to manage the security database and perform the following tasks:
Add users without using the User Account Management window
Print a report of the security database
Back up the security database without shutting down LAN Distance.
The security database tools are:
CMBACKUP
CMPRINT
CMPROCES
ΓòÉΓòÉΓòÉ 25.1. CMBACKUP ΓòÉΓòÉΓòÉ
CMBACKUP provides a command line interface that allows you to back up the
database while LAN Distance is running. The database can be backed up to a
specific file. This tool accepts an input file name as a parameter and copies
the security database using this file name.
SYNTAX:
CMBACKUP <output_file>
where:
<output_file> is the name of the backup file the user
wants to save the security database to.
If this option is ignored, the default backup file is
WCBUSRF.BAK.
ΓòÉΓòÉΓòÉ 25.2. CMPRINT ΓòÉΓòÉΓòÉ
CMPRINT provides a command line interface that you can use to print a list of
the users in the security database.
All of the userIDs and user comments in the LAN Distance security database are
printed in to a specified file.
SYNTAX:
CMPRINT </FI:input_file> </FO:output_file>
where:
/FI:input_file specifies the name of the input LAN
Distance Security Database file. The default is
WCBUSRF.ISF.
/FO:output_file specifies the name of the output
file. The default is CMPRINT.REP.
ΓòÉΓòÉΓòÉ 25.3. CMPROCES ΓòÉΓòÉΓòÉ
The CMPROCES tool provides a batch processing capability for LAN Distance.
This tool reads user information from a Script file and adds user data to the
security database.
SYNTAX:
CMPROCES </CT:control> </FI:infile> </FO:outfile>
where:
CT: Control parameter
AD for add user to database
ME for merge the database
/FO: output file name
The output filename is the name of the report file. This report file
contains the userIDs and the return code of the requested action. The
default output file for adding a user is CMADD.REP.
/FI: input file name
If the control parameter is ADb, the input file is a Script file
containing user information to be added. If the control parameter is ME,
the input file is the security database to be merged. The default file
name of the input file is WCBUSRF.INI.
The format of the Script file for adding a user is one line of user
information per user. The user information line contains the control key
and user information in the following format:
/ID: userID /PS :passphrase /CM: user comment /UT: user type
where:
/ID: The maximum length of the userID is 10 characters. This control
key is required. The userID is not case-sensitive.
/PW: The maximum length of the passphrase is 32 characters. This
control key is ignored when the passphrase of user account is set
to "not required." The passphrase is case-sensitive.
/CM: The user comment is optional. The maximum length of user comment
is 40 characters and it is not case-sensitive.
/UT: The user type is optional and the default is user. There are
three types of user available:
U = USER
A = ADMINISTRATOR
S = SECURITY ADMINISTRATOR
ΓòÉΓòÉΓòÉ 26. Developing Security User Exits ΓòÉΓòÉΓòÉ
This appendix discusses the security user exits available in LAN Distance 5.0.
ΓòÉΓòÉΓòÉ 26.1. Security User Exit Enablement ΓòÉΓòÉΓòÉ
LAN Distance now supports two optional levels of security for restricted access
to the LAN and its resources. One level is the existing LAN Distance security
(User Account Management), included in the LAN Distance product. The second
level is a security user exit package that is distributed separately from the
LAN Distance product. LAN Distance supports any OEM-provided security user
exit package that is developed in conformance with the LAN Distance Generalized
Security User Exit API.
What Is a Security User Exit Package?
A security user exit package consists of two user exit modules: one for the
client and one for the server. The client and server user exit modules work
together to implement the user authentication protocol defined by the security
user exit package. A user authentication protocol is a series of user exit
messages/tokens exchanged between the client and server user exit modules when
validating the user of a LAN Distance client workstation that is calling a LAN
Distance connection server.
Using Multiple Security User Exit Packages
One LAN Distance client workstation can use a different security user exit
package to access each different LAN Distance server workstation it calls. A
LAN Distance server workstation must use only one security user exit package to
allow access from all LAN Distance client workstations that call it.
Using Security User Exit Packages with LAN Distance Security
Security user exit packages can be used with or without LAN Distance security
(User Account Management). If LAN Distance security is used with the security
user exit package, the authentication will take place first through the user
exit and second through LAN Distance security.
Enabling Security User Exit
To enable the user-supplied security exit, follow the OEM-provided security
exit instructions.
LAN Distance Security User Exit Development Toolkit
A development toolkit for the LAN Distance Security User Exit for OS/2 and
Windows is available. The toolkit contains:
- Specification of the LAN Distance Generalized Security User Exit API
- Description of how a LAN Distance security user exit can be
installed/registered at LAN Distance workstations
- Sample source code for developing your own LAN Distance security user
exit package
The toolkit is available through IBM Service and Support by referencing APAR
IC07742.
ΓòÉΓòÉΓòÉ 27. Notices ΓòÉΓòÉΓòÉ
Sixth Edition (April 1997)
The following paragraph does not apply to the United Kingdom or any country
where such provisions are inconsistent with local law: INTERNATIONAL BUSINESS
MACHINES CORPORATION PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY
KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states
do not allow disclaimer of express or implied warranties in certain
transactions; therefore, this statement may not apply to you.
This publication could include technical inaccuracies or typographical errors.
Changes are periodically made to the information herein; these changes will be
incorporated in new editions of the publication. IBM may make improvements
and/or changes in the product(s) and/or the program(s) described in this
publication at any time.
This publication was developed for products and services offered in the United
States of America. IBM may not offer the products, services, or features
discussed in this document in other countries, and the information is subject
to change without notice. Consult your local IBM representative for
information on the products, services, and features available in your area.
Requests for technical information about IBM products should be made to your
IBM reseller or IBM marketing representative.
ΓòÉΓòÉΓòÉ 27.1. Copyright Notices ΓòÉΓòÉΓòÉ
(C)Copyright International Business Machines Corporation 1992, 1997. All
rights reserved.
Note to U.S. Government Users - Documentation related to restricted rights -
Use, duplication or disclosure is subject to restrictions set forth in GSA ADP
Schedule Contract with IBM Corp.
ΓòÉΓòÉΓòÉ 27.2. Disclaimers ΓòÉΓòÉΓòÉ
References in this book to IBM products, programs, or services do not imply
that IBM intends to make these available in all countries in which IBM
operates. Any reference to an IBM product, program, or service is not intended
to state or imply that only that IBM product, program, or service may be used.
Subject to IBM's valid intellectual property or other legally protectable
rights, any functionally equivalent product, program, or service may be used
instead of the IBM product, program, or service. The evaluation and
verification of operation in conjunction with other products, except those
expressly designated by IBM, are the responsibility of the user.
IBM may have patents or pending patent applications covering subject matter in
this document. The furnishing of this document does not give you any license
to these patents. You can send license inquiries, in writing, to:
IBM Director of Licensing
IBM Corporation
500 Columbus Avenue
Thornwood, NY 10594
U.S.A.
Asia-Pacific users can inquire, in writing, to the IBM Director of
Intellectual Property and Licensing, IBM World Trade Asia Corporation, 2-31
Roppongi 3-chome, Minato-ku, Tokyo 106, Japan.
Licensees of this program who wish to have information about it for the
purpose of enabling:(i)the exchange of information between independently
created programs and other programs (including this one) and (ii)the mutual
use of the information which has been exchanged, should contact IBM
Corporation, Department LZKS, 11400 Burnet Road, Austin, TX 78758 U.S.A. Such
information may be available, subject to appropriate terms and conditions,
including in some cases, payment of a fee.
ΓòÉΓòÉΓòÉ 27.3. Trademarks ΓòÉΓòÉΓòÉ
For a list of IBM and non-IBM trademarks, refer to the online book Trademarks
in the Information folder.
ΓòÉΓòÉΓòÉ 28. Glossary ΓòÉΓòÉΓòÉ
ΓòÉΓòÉΓòÉ 28.1. A ΓòÉΓòÉΓòÉ
ΓòÉΓòÉΓòÉ 28.1.1. ad hoc conferencing ΓòÉΓòÉΓòÉ
ad hoc conferencing
A dynamic environment in which two or more LAN Distance workstations dial in to
a common LAN Distance workstation (the hub) and conference with each other
across the virtual LAN connections. See also hub.
ΓòÉΓòÉΓòÉ 28.1.2. administrator ΓòÉΓòÉΓòÉ
administrator
See LAN Distance administrator.
ΓòÉΓòÉΓòÉ 28.1.3. Advanced Network Driver Interface Specification (ANDIS) ΓòÉΓòÉΓòÉ
Advanced Network Driver Interface Specification (ANDIS)
An upgraded version of the Network Driver Interface Specification (NDIS). It
is the interface between the LAN Distance logical adapter and the WAN adapter
MAC.
ΓòÉΓòÉΓòÉ 28.1.4. Advanced Peer-to-Peer Networking (APPN) ΓòÉΓòÉΓòÉ
Advanced Peer-to-Peer Networking (APPN)
An implementation of the Systems Network Architecture (SNA) LU 6.2 protocol
that allows interconnected systems to communicate and share the processing of
programs. APPN conforms to the IEEE 802.2 interface; applications using it are
supported by the LAN Distance product.
ΓòÉΓòÉΓòÉ 28.1.5. Advanced Program-to-Program Communications (APPC) ΓòÉΓòÉΓòÉ
Advanced Program-to-Program Communications (APPC)
An implementation of the Systems Network Architecture (SNA) LU 6.2 protocol
that allows interconnected systems to communicate and share the processing of
programs. APPC conforms to the IEEE 802.2 interface; applications using it are
supported by the LAN Distance product.
ΓòÉΓòÉΓòÉ 28.1.6. alert ΓòÉΓòÉΓòÉ
alert
A message sent to a system services control point to report that an error
occurred that requires operator intervention or attention. For the LAN
Distance product, alerts for communications errors are generated through
FFST/2. FFST/2 can be configured to forward the alerts to NetView or central
LAN management point.
ΓòÉΓòÉΓòÉ 28.1.7. ANDIS ΓòÉΓòÉΓòÉ
ANDIS
See Advanced Network Driver Interface Specification (ANDIS).
ΓòÉΓòÉΓòÉ 28.1.8. answer ΓòÉΓòÉΓòÉ
answer
To acknowledge an attempt from a remote workstation to establish a LAN Distance
connection. Answering a call does not imply a successful connection. The
dialing and answering workstations must negotiate to establish the connection.
ΓòÉΓòÉΓòÉ 28.1.9. answer criteria ΓòÉΓòÉΓòÉ
answer criteria
The set of specifications that enables a particular Answer Mode.
ΓòÉΓòÉΓòÉ 28.1.10. answer mode ΓòÉΓòÉΓòÉ
answer mode
A workstation state that allows incoming calls to be acknowledged, depending on
their conformity to a defined set of specifications. See also answer criteria.
Multiple answer modes (answering states based on different call acceptance
specifications) can be configured for a workstation.
ΓòÉΓòÉΓòÉ 28.1.11. APPC ΓòÉΓòÉΓòÉ
APPC
See Advanced Program-to-Program Communications (APPC).
ΓòÉΓòÉΓòÉ 28.1.12. APPN ΓòÉΓòÉΓòÉ
APPN
See Advanced Peer-to-Peer Networking (APPN).
ΓòÉΓòÉΓòÉ 28.1.13. ARTIC ΓòÉΓòÉΓòÉ
ARTIC
An IBM WAN adapter that provides asynchronous and synchronous transmission
support for up to 8 communication ports.
ΓòÉΓòÉΓòÉ 28.1.14. asynchronous transmission ΓòÉΓòÉΓòÉ
asynchronous transmission
A type of data communication in which transmission of a character or a block of
characters can begin at any time, but in which the bits that represent the
character or block have equal time duration.
ΓòÉΓòÉΓòÉ 28.1.15. audit log ΓòÉΓòÉΓòÉ
audit log
A record of all LAN Distance connection attempts, successful LAN Distance
connection activity, link statistics, and security events at a LAN Distance
Remote or LAN Distance Connection Server.
ΓòÉΓòÉΓòÉ 28.2. B ΓòÉΓòÉΓòÉ
ΓòÉΓòÉΓòÉ 28.2.1. Basic Settings ΓòÉΓòÉΓòÉ
Basic Settings
A highly guided, simplified path for installing and configuring a LAN Distance
Remote. Basic Settings supports asynchronous and ISDN switched line connection
types.
ΓòÉΓòÉΓòÉ 28.2.2. binding ΓòÉΓòÉΓòÉ
binding
The configurable association between two layers of communications software. Two
bindings are required by the LAN Distance product. First, the LAN protocol must
be bound to the LAN Distance logical adapter. Second, the LAN Distance logical
adapter must be bound to the WAN adapter MAC.
ΓòÉΓòÉΓòÉ 28.2.3. bridge ΓòÉΓòÉΓòÉ
bridge
A functional unit that connects two local area networks (LANs) that use the
same logical link control protocol but may use different medium access control
protocols.
ΓòÉΓòÉΓòÉ 28.2.4. broadcast message ΓòÉΓòÉΓòÉ
broadcast message
Synonymous with broadcast frame. A message that is transmitted to all
destinations on a local area network (LAN).
ΓòÉΓòÉΓòÉ 28.3. C ΓòÉΓòÉΓòÉ
ΓòÉΓòÉΓòÉ 28.3.1. callback ΓòÉΓòÉΓòÉ
callback
A feature, active during LAN Distance connection establishment, in which the
answering workstation re-initiates the connection by placing a call back to the
dialing workstation. The original dialing workstation must be a LAN Distance
Remote. This feature provides a level of security and can be used to manage
telephone charges by placing call control at the answering workstation.
ΓòÉΓòÉΓòÉ 28.3.2. callback type ΓòÉΓòÉΓòÉ
callback type
The method, fixed or variable, of obtaining the callback telephone number. It
determines whether the telephone number is already configured or if it is
supplied by the dialing user at connection time.
ΓòÉΓòÉΓòÉ 28.3.3. carbon copy ΓòÉΓòÉΓòÉ
carbon copy
A remote access technology in which keyboard and screen data are routed between
two workstations across a WAN connection. This technology is supported by LAN
Distance if it is NDIS enabled; however, it is not used by the LAN Distance
product.
ΓòÉΓòÉΓòÉ 28.3.4. CID ΓòÉΓòÉΓòÉ
CID
See Configuration, Installation and Distribution (CID).
ΓòÉΓòÉΓòÉ 28.3.5. communication port ΓòÉΓòÉΓòÉ
communication port
An access point for data to enter or exit a communication device. For example,
a serial port to which a modem is attached is a communication port.
ΓòÉΓòÉΓòÉ 28.3.6. Configuration, Installation and Distribution (CID) ΓòÉΓòÉΓòÉ
Configuration, Installation and Distribution (CID)
An IBM architecture for standard LAN installation and configuration operations.
The portions of CID implemented by the LAN Distance product are (1)
installation from a redirected drive and (2) use of a response file.
ΓòÉΓòÉΓòÉ 28.4. D ΓòÉΓòÉΓòÉ
ΓòÉΓòÉΓòÉ 28.4.1. device driver replacement ΓòÉΓòÉΓòÉ
device driver replacement
The technology, implemented by the LAN Distance product, in which a LAN adapter
is replaced by a WAN adapter MAC to transmit data across wide area connections.
The LAN Distance logical adapter and WAN adapter MAC send and receive LAN data
frames across a LAN Distance connection. This technology enables transparent
support of LAN applications and LAN protocols.
ΓòÉΓòÉΓòÉ 28.4.2. dial ΓòÉΓòÉΓòÉ
dial
To initiate a LAN Distance connection by placing a call to a target location.
This term applies to connections over switched and nonswitched lines, even
though the act of dialing a telephone number does not actually apply to
nonswitched lines.
ΓòÉΓòÉΓòÉ 28.4.3. dial-in ΓòÉΓòÉΓòÉ
dial-in
The action of establishing a LAN Distance connection to a LAN, by dialing a LAN
Distance Connection Server on the LAN.
ΓòÉΓòÉΓòÉ 28.4.4. dial-in port ΓòÉΓòÉΓòÉ
dial-in port
A LAN Distance communication port designated by the LAN Distance product to
answer incoming calls.
ΓòÉΓòÉΓòÉ 28.4.5. Dial Services Interface (DSI) ΓòÉΓòÉΓòÉ
Dial Services Interface (DSI)
A program interface to the dialing services of the LAN Distance product.
ΓòÉΓòÉΓòÉ 28.4.6. directed frame ΓòÉΓòÉΓòÉ
directed frame
A data frame that is intended to be delivered to a specific location and thus
contains the address of its destination.
ΓòÉΓòÉΓòÉ 28.4.7. duplicate address checker ΓòÉΓòÉΓòÉ
duplicate address checker
A LAN Distance feature to ensure that workstations dialing in to a LAN have a
unique LAN adapter address.
ΓòÉΓòÉΓòÉ 28.5. E ΓòÉΓòÉΓòÉ
ΓòÉΓòÉΓòÉ 28.5.1. error log ΓòÉΓòÉΓòÉ
error log
A workstation log of error information, for use in problem determination by
your designated support organization. The LAN Distance product uses FFST/2 to
record error log information.
ΓòÉΓòÉΓòÉ 28.5.2. error message log ΓòÉΓòÉΓòÉ
error message log
A workstation file containing a copy of all error and warning messages
generated at that workstation. It might also contain Error Reports. (See also
Error Report).
ΓòÉΓòÉΓòÉ 28.5.3. error report ΓòÉΓòÉΓòÉ
error report
An error message generated by a remote LAN Distance Connection Server, sent to
a LAN Distance administrator as a pop-up, and written to the LAN Distance
administrator's error message log.
ΓòÉΓòÉΓòÉ 28.5.4. Ethernet ΓòÉΓòÉΓòÉ
Ethernet
A 10-megabit baseband local area network that allows multiple stations to
access the transmission medium without prior coordination. It avoids contention
by using carrier sense and deference, and resolves contention by using
collision detection and transmission.
ΓòÉΓòÉΓòÉ 28.6. F ΓòÉΓòÉΓòÉ
ΓòÉΓòÉΓòÉ 28.6.1. filtering ΓòÉΓòÉΓòÉ
filtering
Synonymous with traffic filtering. A LAN Distance feature that limits the LAN
traffic that flows across a LAN Distance connection to only the data frames
that apply to the participating workstations. Filtering criteria are
configurable and can be based on the type of LAN data frame being transmitted
and the source or destination of that data.
ΓòÉΓòÉΓòÉ 28.6.2. First Failure Support Technology/2 (FFST/2) ΓòÉΓòÉΓòÉ
First Failure Support Technology/2 (FFST/2)
A software product that provides a set of Application Program Interfaces for
OS/2 programs to invoke for aid in problem determination. Functions provided
by FFST/2 include logging and displaying errors, formatting and routing alerts,
and generating data dumps. FFST/2 is included in the LAN Distance product
packages.
ΓòÉΓòÉΓòÉ 28.6.3. fixed callback ΓòÉΓòÉΓòÉ
fixed callback
A type of callback in which the telephone number to be dialed is always the
same.
ΓòÉΓòÉΓòÉ 28.6.4. frame ΓòÉΓòÉΓòÉ
frame
A data structure consisting of fields defined by a protocol for the
transmission of user and control data.
ΓòÉΓòÉΓòÉ 28.6.5. functional address ΓòÉΓòÉΓòÉ
functional address
A Token-Ring destination address used to identify widely-used functions. It is
typically used to specify the destination for a broadcast message.
ΓòÉΓòÉΓòÉ 28.7. G ΓòÉΓòÉΓòÉ
ΓòÉΓòÉΓòÉ 28.8. H ΓòÉΓòÉΓòÉ
ΓòÉΓòÉΓòÉ 28.8.1. hang up ΓòÉΓòÉΓòÉ
hang up
To end a LAN Distance connection.
ΓòÉΓòÉΓòÉ 28.8.2. homologation ΓòÉΓòÉΓòÉ
homologation
The enforcement of certain country or network requirements regarding the use of
telephone circuits and other networks by computers. The LAN Distance product
requires the modems that it uses to be homologated.
ΓòÉΓòÉΓòÉ 28.8.3. hub ΓòÉΓòÉΓòÉ
hub
A LAN Distance Connection Server workstation acting as an intermediary for ad
hoc conferencing among multiple LAN Distance workstations. The hub workstation
typically runs LAN application server software, such as OS/2 LAN Server, to
manage communications among the conferencing workstations. The hub must be an
OS/2 workstation.
ΓòÉΓòÉΓòÉ 28.9. I ΓòÉΓòÉΓòÉ
ΓòÉΓòÉΓòÉ 28.9.1. IBM LAN Distance Remote ΓòÉΓòÉΓòÉ
IBM LAN Distance Remote
The IBM product that provides security and remote LAN access for individual
workstations to other workstations and LANs.
ΓòÉΓòÉΓòÉ 28.9.2. IBM LAN Distance Connection Server ΓòÉΓòÉΓòÉ
IBM LAN Distance Connection Server
The IBM product that provides security and routing capabilities to allow remote
workstations to access LAN resources.
ΓòÉΓòÉΓòÉ 28.9.3. IEEE 802.2 ΓòÉΓòÉΓòÉ
IEEE 802.2
A standard defined by the Institute of Electrical and Electronics Engineers
(IEEE) for logical link control within a local area network. IEEE 802.2 is one
of the standards supported by the LAN Distance product for LAN protocol
software.
ΓòÉΓòÉΓòÉ 28.9.4. IEEE 802.5 ΓòÉΓòÉΓòÉ
IEEE 802.5
A standard defined by the Institute of Electrical and Electronics Engineers
(IEEE) for framing and error detection within a Token-Ring network. IEEE 802.5
is the framing standard used by the LAN Distance logical adapter.
ΓòÉΓòÉΓòÉ 28.9.5. integrated services digital network (ISDN) ΓòÉΓòÉΓòÉ
integrated services digital network (ISDN)
A digital end-to-end telecommunication network that supports multiple services
including, but not limited to, voice and data.
ΓòÉΓòÉΓòÉ 28.9.6. ISDN ΓòÉΓòÉΓòÉ
ISDN
See integrated services digital network (ISDN).
ΓòÉΓòÉΓòÉ 28.10. J ΓòÉΓòÉΓòÉ
ΓòÉΓòÉΓòÉ 28.11. K ΓòÉΓòÉΓòÉ
ΓòÉΓòÉΓòÉ 28.12. L ΓòÉΓòÉΓòÉ
ΓòÉΓòÉΓòÉ 28.12.1. LAN ΓòÉΓòÉΓòÉ
LAN
See local area network (LAN).
ΓòÉΓòÉΓòÉ 28.12.2. LAN adapter ΓòÉΓòÉΓòÉ
LAN adapter
A card which is installed on a workstation and is used to attach the
workstation to a local area network (LAN).
ΓòÉΓòÉΓòÉ 28.12.3. LAN Adapter Protocol Support (LAPS) ΓòÉΓòÉΓòÉ
LAN Adapter Protocol Support (LAPS)
LAN networking software that allows selection and binding of LAN protocols to
LAN adapters. It is required by and shipped with the LAN Distance product.
ΓòÉΓòÉΓòÉ 28.12.4. LAN application ΓòÉΓòÉΓòÉ
LAN application
A program that shares data and resources among workstations through the
transmission of data across a local area network (LAN). LAN applications must
adhere to an NDIS-compliant LAN protocol, such as NetBIOS IEEE 802.2, or
TCP/IP, to be supported by the LAN Distance product.
ΓòÉΓòÉΓòÉ 28.12.5. LAN workstation ΓòÉΓòÉΓòÉ
LAN workstation
A workstation physically residing on a local area network (LAN). Contrast to a
stand-alone workstation.
ΓòÉΓòÉΓòÉ 28.12.6. LAN Distance administrator ΓòÉΓòÉΓòÉ
LAN Distance administrator
A user-type designation for the user who performs LAN Distance system
management tasks. See user and see also LAN Distance security administrator for
the other user types defined by the LAN Distance product.
ΓòÉΓòÉΓòÉ 28.12.7. LAN Distance bridge ΓòÉΓòÉΓòÉ
LAN Distance bridge
A bridge established by a LAN Distance Connection Server for the wide area
connections to its LAN. The LAN Distance bridge routes and filters LAN traffic
for the LAN Distance wide area network.
ΓòÉΓòÉΓòÉ 28.12.8. LAN Distance Connection Server ΓòÉΓòÉΓòÉ
LAN Distance Connection Server
See IBM LAN Distance Connection Server.
ΓòÉΓòÉΓòÉ 28.12.9. LAN Distance Connection Server ΓòÉΓòÉΓòÉ
LAN Distance Connection Server
The LAN Distance connection agent for a LAN. It is the location of central
answering, system management, and security resources for the LAN Distance
connection to a LAN.
ΓòÉΓòÉΓòÉ 28.12.10. LAN Distance Remote ΓòÉΓòÉΓòÉ
LAN Distance Remote
See IBM LAN Distance Remote.
ΓòÉΓòÉΓòÉ 28.12.11. LAN Distance Remote ΓòÉΓòÉΓòÉ
LAN Distance Remote
A workstation on which the LAN Distance Remote product is installed. It can
establish LAN Distance connections to or from a LAN Distance Remote and a LAN
Distance Connection Server.
ΓòÉΓòÉΓòÉ 28.12.12. LAN Distance security administrator ΓòÉΓòÉΓòÉ
LAN Distance security administrator
A user-type designation for the user who manages LAN Distance security,
including configuration of the security policy and administration of the user
account database. See user and see also LAN Distance administrator for the
other user types defined by the LAN Distance product.
ΓòÉΓòÉΓòÉ 28.12.13. LAN Distance system ΓòÉΓòÉΓòÉ
LAN Distance system
The set of workstations that a LAN Distance administrator supports. It
includes the workstations on which the LAN Distance product is installed and
all the workstations that can participate in LAN Distance wide area
connections.
ΓòÉΓòÉΓòÉ 28.12.14. LAN Distance wide area network ΓòÉΓòÉΓòÉ
LAN Distance wide area network
The set of workstations that can communicate with each other over their
interrelated LAN Distance connections. In the remote-to-remote environment, it
includes the entire virtual LAN. In the remote-to-LAN environment, it includes
remote workstations, the LAN Distance Connection Server to which they are
connected, and the LAN-attached workstations that are allowed to communicate
with the remote workstations.
ΓòÉΓòÉΓòÉ 28.12.15. LAN protocol ΓòÉΓòÉΓòÉ
LAN protocol
The protocol used for information transfer among the workstations attached on a
LAN. The LAN protocols supported by the LAN Distance product must be
NDIS-compliant (for example, IEEE 802.2, NetBIOS, and TCP/IP).
ΓòÉΓòÉΓòÉ 28.12.16. LAN resource ΓòÉΓòÉΓòÉ
LAN resource
A directory or file resource, printer, or serial device that is physically
attached to a LAN and is managed by the LAN's administrative software.
ΓòÉΓòÉΓòÉ 28.12.17. LAN Requester ΓòÉΓòÉΓòÉ
LAN Requester
A component of the OS/2 program that allows users to access shared network
resources made available by an OS/2 LAN Server. Using the client/server model,
the LAN Requester component would reside on the client workstation.
ΓòÉΓòÉΓòÉ 28.12.18. LAN Server ΓòÉΓòÉΓòÉ
LAN Server
See OS/2 LAN Server.
ΓòÉΓòÉΓòÉ 28.12.19. LAN transport protocol ΓòÉΓòÉΓòÉ
LAN transport protocol
Synonymous with LAN protocol.
ΓòÉΓòÉΓòÉ 28.12.20. LAPS ΓòÉΓòÉΓòÉ
LAPS
See LAN Adapter Protocol Support (LAPS).
ΓòÉΓòÉΓòÉ 28.12.21. leased line ΓòÉΓòÉΓòÉ
leased line
A telecommunications line on which connections do not have to be established by
dialing a telephone number; the line is reserved for use between specific
locations and is activated directly. See also nonswitched line.
ΓòÉΓòÉΓòÉ 28.12.22. line ΓòÉΓòÉΓòÉ
line
The physical medium, such as a telephone wire, used to transmit data.
ΓòÉΓòÉΓòÉ 28.12.23. local area network (LAN) ΓòÉΓòÉΓòÉ
local area network (LAN)
A network comprising two or more units physically connected for the purpose of
local resource sharing. The network is generally limited to a moderate-sized
geographic area, such as a single office building or campus.
ΓòÉΓòÉΓòÉ 28.12.24. logical adapter network address ΓòÉΓòÉΓòÉ
logical adapter network address
A unique identifier for a workstation or resource participating in a LAN
Distance wide area network. The LAN Distance product uses this address to
accomplish LAN traffic filtering and routing.
ΓòÉΓòÉΓòÉ 28.13. M ΓòÉΓòÉΓòÉ
ΓòÉΓòÉΓòÉ 28.13.1. media access control (MAC) ΓòÉΓòÉΓòÉ
media access control (MAC)
The communications software that controls the interface between the LAN
protocol software and the workstation's LAN or WAN adapter.
ΓòÉΓòÉΓòÉ 28.13.2. modem (modulator/demodulator) ΓòÉΓòÉΓòÉ
modem (modulator/demodulator)
A device that converts digital data to an analog signal that can be transmitted
on a telecommunication line, and converts the analog signal received to digital
data.
ΓòÉΓòÉΓòÉ 28.13.3. modem type ΓòÉΓòÉΓòÉ
modem type
An item in the LAN Distance product used to configure a modem. A modem type can
be synchronous or asynchronous. Many modem types are listed as modem brand
names.
ΓòÉΓòÉΓòÉ 28.13.4. Multi-Protocol Transport Services (MPTS). ΓòÉΓòÉΓòÉ
Multi-Protocol Transport Services (MPTS).
LAN networking software that allows selection and binding of LAN protocols to
LAN adapters. MPTS is a successor product to NTS/2 and contains the LAPS
function.
ΓòÉΓòÉΓòÉ 28.14. N ΓòÉΓòÉΓòÉ
ΓòÉΓòÉΓòÉ 28.14.1. NDIS ΓòÉΓòÉΓòÉ
NDIS
See Network Driver Interface Specification (NDIS).
ΓòÉΓòÉΓòÉ 28.14.2. NetBIOS ΓòÉΓòÉΓòÉ
NetBIOS
A LAN protocol that provides application program interfaces to the network
adapter for establishing sessions and transmitting data. It is one of the LAN
protocols supported by the LAN Distance product.
ΓòÉΓòÉΓòÉ 28.14.3. NetBIOS name ΓòÉΓòÉΓòÉ
NetBIOS name
The name by which a node is known. It is used as the basis for communication
between application programs.
ΓòÉΓòÉΓòÉ 28.14.4. NetView/2 ΓòÉΓòÉΓòÉ
NetView/2
An OS/2 program product for central LAN management. Configuring the interface
between FFST/2 and NetView/2 provides NetView/2 access to LAN Distance
information.
ΓòÉΓòÉΓòÉ 28.14.5. Network Driver Interface Specification (NDIS) ΓòÉΓòÉΓòÉ
Network Driver Interface Specification (NDIS)
An industry standard interface between network adapter software and LAN
transport protocols. The interface into the LAN Distance logical network
adapter is compliant with NDIS, and supports any LAN protocol that is also
compliant, such as IEEE 802.2, NetBIOS, and TCP/IP.
ΓòÉΓòÉΓòÉ 28.14.6. Network Transport Services/2 (NTS/2) ΓòÉΓòÉΓòÉ
Network Transport Services/2 (NTS/2)
A software product that includes the particular LAN networking software, LAPS,
required by the LAN Distance product. It also includes support for the
Configuration, Installation and Distribution (CID) facility.
ΓòÉΓòÉΓòÉ 28.14.7. non-directed frame ΓòÉΓòÉΓòÉ
non-directed frame
A data frame whose destination is not limited to a single location. Its
destination is specified as a functional address, group address, or All
Stations.
ΓòÉΓòÉΓòÉ 28.14.8. nonswitched line ΓòÉΓòÉΓòÉ
nonswitched line
A telecommunications line on which connections do not have to be established by
dialing a telephone number; that is, the line is reserved for use between
specific locations and is activated directly. Contrast with switched line. For
PSTN connections, nonswitched lines are referred to as leased lines.
ΓòÉΓòÉΓòÉ 28.14.9. notebook ΓòÉΓòÉΓòÉ
notebook
A graphical representation that resembles a bound notebook containing pages
separated into sections by tabbed dividers. A user can turn the pages of a
notebook to move from one section to another.
ΓòÉΓòÉΓòÉ 28.15. O ΓòÉΓòÉΓòÉ
ΓòÉΓòÉΓòÉ 28.15.1. object ΓòÉΓòÉΓòÉ
object
A visual component of a user interface on which an action can be performed.
ΓòÉΓòÉΓòÉ 28.15.2. object-oriented user interface ΓòÉΓòÉΓòÉ
object-oriented user interface
A type of user interface that implements the object-action paradigm of
selecting an object and then selecting an action to apply to that object.
ΓòÉΓòÉΓòÉ 28.15.3. OEM ΓòÉΓòÉΓòÉ
OEM
Original Equipment Manufacturer. The designation applied to hardware and
software developed by a company other than IBM.
ΓòÉΓòÉΓòÉ 28.15.4. OS/2 LAN Server ΓòÉΓòÉΓòÉ
OS/2 LAN Server
A program that allows resources to be shared with other computers on a local
area network (LAN). It contains both the client and server components.
ΓòÉΓòÉΓòÉ 28.16. P ΓòÉΓòÉΓòÉ
ΓòÉΓòÉΓòÉ 28.16.1. passphrase ΓòÉΓòÉΓòÉ
passphrase
A secret string of characters known to a computer system and a particular user
who must specify it to gain access to the system and its data. A passphrase
allows imbedded spaces and mixed case characters to support more flexible and
complex combinations than a password allows. LAN Distance security relies on a
user ID to identify a user and can optionally require a passphrase to
authenticate that user.
ΓòÉΓòÉΓòÉ 28.16.2. personal account ΓòÉΓòÉΓòÉ
personal account
An entry in the user account database that contains security specifications for
a particular user. A Personal Account is the subset of fields that the
specific user can alter, the passphrase and user description. The complete set
is managed by the LAN Distance security administrator.
ΓòÉΓòÉΓòÉ 28.16.3. phone book ΓòÉΓòÉΓòÉ
phone book
The LAN Distance product contains two type of phone books. Each entry in the
phone book notebook under the Settings tab contains all information needed for
dialing a particular workstation. Open as leads to a phone book used to dial
other LAN Distance workstations.
ΓòÉΓòÉΓòÉ 28.16.4. phone book entry ΓòÉΓòÉΓòÉ
phone book entry
A single named object within the phone book settings notebook.
ΓòÉΓòÉΓòÉ 28.16.5. point-to-point protocol (PPP) ΓòÉΓòÉΓòÉ
point-to-point protocol (PPP)
A protocol that is used throughout the networking industry as a standardized
method for interconnecting a variety of hosts, bridges, and routers from one or
more vendors.
ΓòÉΓòÉΓòÉ 28.16.6. port ΓòÉΓòÉΓòÉ
port
See communication port.
ΓòÉΓòÉΓòÉ 28.16.7. PPP ΓòÉΓòÉΓòÉ
PPP
See point-to-point protocol (PPP).
ΓòÉΓòÉΓòÉ 28.16.8. privilege ΓòÉΓòÉΓòÉ
privilege
A security designation that entitles a user to perform a set of tasks.
Privileges are based on the user-type definitions of user, LAN Distance
administrator, and LAN Distance security administrator, and are assigned within
a user account.
ΓòÉΓòÉΓòÉ 28.16.9. protocol ΓòÉΓòÉΓòÉ
protocol
The set of rules governing the operation of functional units of a communication
system that must be followed for communication to take place.
ΓòÉΓòÉΓòÉ 28.16.10. protocol stack ΓòÉΓòÉΓòÉ
protocol stack
Within the LAN Distance product, a synonym for LAN protocol.
ΓòÉΓòÉΓòÉ 28.16.11. protocol stack timer ΓòÉΓòÉΓòÉ
protocol stack timer
A configurable parameter associated with the operation of a LAN protocol.
ΓòÉΓòÉΓòÉ 28.16.12. PSTN ΓòÉΓòÉΓòÉ
PSTN
See Public Switched Telephone Network (PSTN).
ΓòÉΓòÉΓòÉ 28.16.13. Public Switched Telephone Network (PSTN) ΓòÉΓòÉΓòÉ
Public Switched Telephone Network (PSTN)
Any switching system that provides a circuit switched to many customers. Four
types exist in the USA: Telex, TWS, telephone, and Broadband Exchange. Within
the LAN Distance product, PSTN encompasses asynchronous and synchronous
connections.
ΓòÉΓòÉΓòÉ 28.17. Q ΓòÉΓòÉΓòÉ
ΓòÉΓòÉΓòÉ 28.18. R ΓòÉΓòÉΓòÉ
ΓòÉΓòÉΓòÉ 28.18.1. README ΓòÉΓòÉΓòÉ
README
A file included in a software package to document very recent information. It
supplements formal product documentation and ensures that information is
up-to-date when a product is shipped to users. In the LAN Distance product, the
file is located in the /WAL subdirectory.
ΓòÉΓòÉΓòÉ 28.18.2. redirected drive ΓòÉΓòÉΓòÉ
redirected drive
A LAN feature allowing one LAN-attached workstation to access a drive on
another LAN-attached workstation using a simple drive designation uniquely
equated to the target workstation's drive.
ΓòÉΓòÉΓòÉ 28.18.3. remote-to-LAN ΓòÉΓòÉΓòÉ
remote-to-LAN
A LAN Distance environment in which a standalone workstation connects to a LAN
and accesses its workstations and resources. The standalone workstation
connects to the LAN by dialing a LAN Distance Connection Server on the LAN. See
also dial-in.
ΓòÉΓòÉΓòÉ 28.18.4. remote-to-remote ΓòÉΓòÉΓòÉ
remote-to-remote
A LAN Distance environment in which two workstations are connected to form a
LAN Distance wide area network. Each workstation can access the other's
resources and LAN applications over the LAN Distance connection. See also
virtual LAN.
ΓòÉΓòÉΓòÉ 28.18.5. response file ΓòÉΓòÉΓòÉ
response file
A CID file used to supply answers to an installation program's prompts. These
answers are the responses users specify during a window-driven installation.
ΓòÉΓòÉΓòÉ 28.18.6. ring ΓòÉΓòÉΓòÉ
ring
A network configuration in which devices are connected by unidirectional
transmission links to form a closed path.
ΓòÉΓòÉΓòÉ 28.19. S ΓòÉΓòÉΓòÉ
ΓòÉΓòÉΓòÉ 28.19.1. SAP ΓòÉΓòÉΓòÉ
SAP
Service Access Point. A logical protocol identifier that allows a system to
route data between a remote device and the appropriate communications support.
For example, the SAP value for NetBIOS is hex F0.
ΓòÉΓòÉΓòÉ 28.19.2. secure LAN Distance workstation ΓòÉΓòÉΓòÉ
secure LAN Distance workstation
A LAN Distance workstation on which LAN Distance security is enabled. LAN
Distance security helps to prevent unauthorized users from accessing the LAN
Distance workstation. See also security policy.
ΓòÉΓòÉΓòÉ 28.19.3. Security Administrator ΓòÉΓòÉΓòÉ
Security Administrator
See LAN Distance security administrator.
ΓòÉΓòÉΓòÉ 28.19.4. security policy ΓòÉΓòÉΓòÉ
security policy
The set of rules that can be customized to enable the security requirements of
a particular user environment. Examples of configurable items include Maximum
allowed logon attempts and passphrase durations.
ΓòÉΓòÉΓòÉ 28.19.5. Settings ΓòÉΓòÉΓòÉ
Settings
Also Settings Notebook. The object within the LAN Distance product through
which configuration tasks are performed.
ΓòÉΓòÉΓòÉ 28.19.6. shuttle ΓòÉΓòÉΓòÉ
shuttle
The LAN Distance feature that allows a workstation to switch between a
stand-alone LAN Distance Remote and a Non-LAN Distance LAN-attached
workstation. It is associated with physically moving the workstation on and
off the LAN.
ΓòÉΓòÉΓòÉ 28.19.7. stand-alone workstation ΓòÉΓòÉΓòÉ
stand-alone workstation
A workstation that runs application programs independently of another system,
and is not LAN-attached. Contrast to LAN workstation.
ΓòÉΓòÉΓòÉ 28.19.8. switched line ΓòÉΓòÉΓòÉ
switched line
A telecommunication line in which the connection is established by dialing.
Contrast with nonswitched line. This terms applies to both PSTN and ISDN
connections.
ΓòÉΓòÉΓòÉ 28.19.9. switched link ΓòÉΓòÉΓòÉ
switched link
A wide area connection between workstations.
ΓòÉΓòÉΓòÉ 28.19.10. synchronous transmission ΓòÉΓòÉΓòÉ
synchronous transmission
A type of data communication in which the sending and receiving of characters
are controlled by timing signals.
ΓòÉΓòÉΓòÉ 28.20. T ΓòÉΓòÉΓòÉ
ΓòÉΓòÉΓòÉ 28.20.1. TCP/IP ΓòÉΓòÉΓòÉ
TCP/IP
Transport Control Protocol/Internet Protocol. An NDIS-compliant communications
protocol that integrates unlike computer systems and networks. An
NDIS-compliant version of TCP/IP for OS/2 is one of the LAN protocols supported
by the LAN Distance product.
ΓòÉΓòÉΓòÉ 28.20.2. Token-Ring ΓòÉΓòÉΓòÉ
Token-Ring
A LAN with a ring topology that passes tokens from one attaching device to
another using the NetBIOS protocol.
ΓòÉΓòÉΓòÉ 28.20.3. traffic filtering ΓòÉΓòÉΓòÉ
traffic filtering
Synonymous with filtering. A configurable LAN Distance Connection Server
feature that reduces the amount of LAN traffic that flows across a connection
to only the data frames that are needed by the participating workstations.
ΓòÉΓòÉΓòÉ 28.21. U ΓòÉΓòÉΓòÉ
ΓòÉΓòÉΓòÉ 28.21.1. user ΓòÉΓòÉΓòÉ
user
A security classification for the user who performs the LAN Distance tasks
associated with establishing and using LAN Distance connections, for example,
dialing and running LAN applications. See LAN Distance administrator and see
also LAN Distance security administrator for the other user types defined by
the LAN Distance product.
ΓòÉΓòÉΓòÉ 28.21.2. user account ΓòÉΓòÉΓòÉ
user account
A record in the user account database that contains security specifications for
a particular user. It is organized by user ID and includes information such as
passphrase and privilege. It is managed by a LAN Distance security
administrator.
ΓòÉΓòÉΓòÉ 28.21.3. user account database ΓòÉΓòÉΓòÉ
user account database
A directory of LAN Distance user information. It is used to perform user
identification and authentication for establishing LAN Distance connections and
restricting access to certain tasks.
ΓòÉΓòÉΓòÉ 28.21.4. user ID ΓòÉΓòÉΓòÉ
user ID
User identification; a unique name that identifies a user.
ΓòÉΓòÉΓòÉ 28.21.5. user type ΓòÉΓòÉΓòÉ
user type
A specific type of user that is granted a fixed set of privileges. Each
different type of user is granted a different set of privileges. See User, see
administrator, and see Security Administrator.
ΓòÉΓòÉΓòÉ 28.22. V ΓòÉΓòÉΓòÉ
ΓòÉΓòÉΓòÉ 28.22.1. variable callback ΓòÉΓòÉΓòÉ
variable callback
A type of callback in which the telephone number to be dialed changes according
to the location of the workstation.
ΓòÉΓòÉΓòÉ 28.22.2. virtual LAN ΓòÉΓòÉΓòÉ
virtual LAN
A network consisting of individual workstations connected through the LAN
Distance product. It operates just as a physically connect LAN, through the
applications and LAN protocols supported transparently across the LAN Distance
connections.
ΓòÉΓòÉΓòÉ 28.23. W ΓòÉΓòÉΓòÉ
ΓòÉΓòÉΓòÉ 28.23.1. WAN ΓòÉΓòÉΓòÉ
WAN
See Wide Area Network (WAN).
ΓòÉΓòÉΓòÉ 28.23.2. wide area network (WAN) ΓòÉΓòÉΓòÉ
wide area network (WAN)
A network that provides communication services to a geographic area larger than
that served by a local area network (LAN). In relation to the LAN Distance
product, communication on a WAN is accomplished across telephone lines.
ΓòÉΓòÉΓòÉ <hidden> ΓòÉΓòÉΓòÉ
Some modems may not support this value.
ΓòÉΓòÉΓòÉ <hidden> ΓòÉΓòÉΓòÉ
Some modems may not support this value.
ΓòÉΓòÉΓòÉ <hidden> ΓòÉΓòÉΓòÉ
Some modems may not support this value.