home *** CD-ROM | disk | FTP | other *** search
/ OS/2 Shareware BBS: 10 Tools / 10-Tools.zip / wxos2240.zip / wxWindows-2.4.0 / src / zlib / inflate.c < prev    next >
C/C++ Source or Header  |  2002-04-25  |  11KB  |  393 lines

  1. /* inflate.c -- zlib interface to inflate modules
  2.  * Copyright (C) 1995-2002 Mark Adler
  3.  * For conditions of distribution and use, see copyright notice in zlib.h
  4.  */
  5.  
  6. #include "zutil.h"
  7. #include "infblock.h"
  8.  
  9. struct inflate_blocks_state {int dummy;}; /* for buggy compilers */
  10.  
  11. typedef enum {
  12.       METHOD,   /* waiting for method byte */
  13.       FLAG,     /* waiting for flag byte */
  14.       DICT4,    /* four dictionary check bytes to go */
  15.       DICT3,    /* three dictionary check bytes to go */
  16.       DICT2,    /* two dictionary check bytes to go */
  17.       DICT1,    /* one dictionary check byte to go */
  18.       DICT0,    /* waiting for inflateSetDictionary */
  19.       BLOCKS,   /* decompressing blocks */
  20.       CHECK4,   /* four check bytes to go */
  21.       CHECK3,   /* three check bytes to go */
  22.       CHECK2,   /* two check bytes to go */
  23.       CHECK1,   /* one check byte to go */
  24.       DONE,     /* finished check, done */
  25.       BAD}      /* got an error--stay here */
  26. inflate_mode;
  27.  
  28. /* inflate private state */
  29. struct internal_state {
  30.  
  31.   /* mode */
  32.   inflate_mode  mode;   /* current inflate mode */
  33.  
  34.   /* mode dependent information */
  35.   union {
  36.     uInt method;        /* if FLAGS, method byte */
  37.     struct {
  38.       uLong was;                /* computed check value */
  39.       uLong need;               /* stream check value */
  40.     } check;            /* if CHECK, check values to compare */
  41.     uInt marker;        /* if BAD, inflateSync's marker bytes count */
  42.   } sub;        /* submode */
  43.  
  44.   /* mode independent information */
  45.   int  nowrap;          /* flag for no wrapper */
  46.   uInt wbits;           /* log2(window size)  (8..15, defaults to 15) */
  47.   inflate_blocks_statef
  48.     *blocks;            /* current inflate_blocks state */
  49.  
  50. };
  51.  
  52.  
  53. #if defined(__VISAGECPP__) /* Visualage can't handle this antiquated interface */
  54. int ZEXPORT inflateReset(z_streamp z)
  55. #else
  56. int ZEXPORT inflateReset(z)
  57. z_streamp z;
  58. #endif
  59. {
  60.   if (z == Z_NULL || z->state == Z_NULL)
  61.     return Z_STREAM_ERROR;
  62.   z->total_in = z->total_out = 0;
  63.   z->msg = Z_NULL;
  64.   z->state->mode = z->state->nowrap ? BLOCKS : METHOD;
  65.   inflate_blocks_reset(z->state->blocks, z, Z_NULL);
  66.   Tracev((stderr, "inflate: reset\n"));
  67.   return Z_OK;
  68. }
  69.  
  70.  
  71. #if defined(__VISAGECPP__) /* Visualage can't handle this antiquated interface */
  72. int ZEXPORT inflateEnd(z_streamp z)
  73. #else
  74. int ZEXPORT inflateEnd(z)
  75. z_streamp z;
  76. #endif
  77. {
  78.   if (z == Z_NULL || z->state == Z_NULL || z->zfree == Z_NULL)
  79.     return Z_STREAM_ERROR;
  80.   if (z->state->blocks != Z_NULL)
  81.     inflate_blocks_free(z->state->blocks, z);
  82.   ZFREE(z, z->state);
  83.   z->state = Z_NULL;
  84.   Tracev((stderr, "inflate: end\n"));
  85.   return Z_OK;
  86. }
  87.  
  88. #if defined(__VISAGECPP__) /* Visualage can't handle this antiquated interface */
  89. int ZEXPORT inflateInit2_(z_streamp z, int w, const char* version, int stream_size)
  90. #else
  91. int ZEXPORT inflateInit2_(z, w, version, stream_size)
  92. z_streamp z;
  93. int w;
  94. const char *version;
  95. int stream_size;
  96. #endif
  97. {
  98.   if (version == Z_NULL || version[0] != ZLIB_VERSION[0] ||
  99.       stream_size != sizeof(z_stream))
  100.       return Z_VERSION_ERROR;
  101.  
  102.   /* initialize state */
  103.   if (z == Z_NULL)
  104.     return Z_STREAM_ERROR;
  105.   z->msg = Z_NULL;
  106.   if (z->zalloc == Z_NULL)
  107.   {
  108.     z->zalloc = zcalloc;
  109.     z->opaque = (voidpf)0;
  110.   }
  111.   if (z->zfree == Z_NULL) z->zfree = zcfree;
  112.   if ((z->state = (struct internal_state FAR *)
  113.        ZALLOC(z,1,sizeof(struct internal_state))) == Z_NULL)
  114.     return Z_MEM_ERROR;
  115.   z->state->blocks = Z_NULL;
  116.  
  117.   /* handle undocumented nowrap option (no zlib header or check) */
  118.   z->state->nowrap = 0;
  119.   if (w < 0)
  120.   {
  121.     w = - w;
  122.     z->state->nowrap = 1;
  123.   }
  124.  
  125.   /* set window size */
  126.   if (w < 8 || w > 15)
  127.   {
  128.     inflateEnd(z);
  129.     return Z_STREAM_ERROR;
  130.   }
  131.   z->state->wbits = (uInt)w;
  132.  
  133.   /* create inflate_blocks state */
  134.   if ((z->state->blocks =
  135.       inflate_blocks_new(z, z->state->nowrap ? Z_NULL : adler32, (uInt)1 << w))
  136.       == Z_NULL)
  137.   {
  138.     inflateEnd(z);
  139.     return Z_MEM_ERROR;
  140.   }
  141.   Tracev((stderr, "inflate: allocated\n"));
  142.  
  143.   /* reset state */
  144.   inflateReset(z);
  145.   return Z_OK;
  146. }
  147.  
  148. #if defined(__VISAGECPP__) /* Visualage can't handle this antiquated interface */
  149. int ZEXPORT inflateInit_(z_streamp z, const char* version, int stream_size)
  150. #else
  151. int ZEXPORT inflateInit_(z, version, stream_size)
  152. z_streamp z;
  153. const char *version;
  154. int stream_size;
  155. #endif
  156. {
  157.   return inflateInit2_(z, DEF_WBITS, version, stream_size);
  158. }
  159.  
  160. #define NEEDBYTE {if(z->avail_in==0)return r;r=f;}
  161. #define NEXTBYTE (z->avail_in--,z->total_in++,*z->next_in++)
  162.  
  163. #if defined(__VISAGECPP__) /* Visualage can't handle this antiquated interface */
  164. int ZEXPORT inflate(z_streamp z, int f)
  165. #else
  166. int ZEXPORT inflate(z, f)
  167. z_streamp z;
  168. int f;
  169. #endif
  170. {
  171.   int r;
  172.   uInt b;
  173.  
  174.   if (z == Z_NULL || z->state == Z_NULL || z->next_in == Z_NULL)
  175.     return Z_STREAM_ERROR;
  176.   f = f == Z_FINISH ? Z_BUF_ERROR : Z_OK;
  177.   r = Z_BUF_ERROR;
  178.   while (1) switch (z->state->mode)
  179.   {
  180.     case METHOD:
  181.       NEEDBYTE
  182.       if (((z->state->sub.method = NEXTBYTE) & 0xf) != Z_DEFLATED)
  183.       {
  184.         z->state->mode = BAD;
  185.         z->msg = (char*)"unknown compression method";
  186.         z->state->sub.marker = 5;       /* can't try inflateSync */
  187.         break;
  188.       }
  189.       if ((z->state->sub.method >> 4) + 8 > z->state->wbits)
  190.       {
  191.         z->state->mode = BAD;
  192.         z->msg = (char*)"invalid window size";
  193.         z->state->sub.marker = 5;       /* can't try inflateSync */
  194.         break;
  195.       }
  196.       z->state->mode = FLAG;
  197.     case FLAG:
  198.       NEEDBYTE
  199.       b = NEXTBYTE;
  200.       if (((z->state->sub.method << 8) + b) % 31)
  201.       {
  202.         z->state->mode = BAD;
  203.         z->msg = (char*)"incorrect header check";
  204.         z->state->sub.marker = 5;       /* can't try inflateSync */
  205.         break;
  206.       }
  207.       Tracev((stderr, "inflate: zlib header ok\n"));
  208.       if (!(b & PRESET_DICT))
  209.       {
  210.         z->state->mode = BLOCKS;
  211.         break;
  212.       }
  213.       z->state->mode = DICT4;
  214.     case DICT4:
  215.       NEEDBYTE
  216.       z->state->sub.check.need = (uLong)NEXTBYTE << 24;
  217.       z->state->mode = DICT3;
  218.     case DICT3:
  219.       NEEDBYTE
  220.       z->state->sub.check.need += (uLong)NEXTBYTE << 16;
  221.       z->state->mode = DICT2;
  222.     case DICT2:
  223.       NEEDBYTE
  224.       z->state->sub.check.need += (uLong)NEXTBYTE << 8;
  225.       z->state->mode = DICT1;
  226.     case DICT1:
  227.       NEEDBYTE
  228.       z->state->sub.check.need += (uLong)NEXTBYTE;
  229.       z->adler = z->state->sub.check.need;
  230.       z->state->mode = DICT0;
  231.       return Z_NEED_DICT;
  232.     case DICT0:
  233.       z->state->mode = BAD;
  234.       z->msg = (char*)"need dictionary";
  235.       z->state->sub.marker = 0;       /* can try inflateSync */
  236.       return Z_STREAM_ERROR;
  237.     case BLOCKS:
  238.       r = inflate_blocks(z->state->blocks, z, r);
  239.       if (r == Z_DATA_ERROR)
  240.       {
  241.         z->state->mode = BAD;
  242.         z->state->sub.marker = 0;       /* can try inflateSync */
  243.         break;
  244.       }
  245.       if (r == Z_OK)
  246.         r = f;
  247.       if (r != Z_STREAM_END)
  248.         return r;
  249.       r = f;
  250.       inflate_blocks_reset(z->state->blocks, z, &z->state->sub.check.was);
  251.       if (z->state->nowrap)
  252.       {
  253.         z->state->mode = DONE;
  254.         break;
  255.       }
  256.       z->state->mode = CHECK4;
  257.     case CHECK4:
  258.       NEEDBYTE
  259.       z->state->sub.check.need = (uLong)NEXTBYTE << 24;
  260.       z->state->mode = CHECK3;
  261.     case CHECK3:
  262.       NEEDBYTE
  263.       z->state->sub.check.need += (uLong)NEXTBYTE << 16;
  264.       z->state->mode = CHECK2;
  265.     case CHECK2:
  266.       NEEDBYTE
  267.       z->state->sub.check.need += (uLong)NEXTBYTE << 8;
  268.       z->state->mode = CHECK1;
  269.     case CHECK1:
  270.       NEEDBYTE
  271.       z->state->sub.check.need += (uLong)NEXTBYTE;
  272.  
  273.       if (z->state->sub.check.was != z->state->sub.check.need)
  274.       {
  275.         z->state->mode = BAD;
  276.         z->msg = (char*)"incorrect data check";
  277.         z->state->sub.marker = 5;       /* can't try inflateSync */
  278.         break;
  279.       }
  280.       Tracev((stderr, "inflate: zlib check ok\n"));
  281.       z->state->mode = DONE;
  282.     case DONE:
  283.       return Z_STREAM_END;
  284.     case BAD:
  285.       return Z_DATA_ERROR;
  286.     default:
  287.       return Z_STREAM_ERROR;
  288.   }
  289. #ifdef NEED_DUMMY_RETURN
  290.   return Z_STREAM_ERROR;  /* Some dumb compilers complain without this */
  291. #endif
  292. }
  293.  
  294. #if defined(__VISAGECPP__) /* Visualage can't handle this antiquated interface */
  295. int ZEXPORT inflateSetDictionary(z_streamp z, const Bytef* dictionary, uInt dictLength)
  296. #else
  297. int ZEXPORT inflateSetDictionary(z, dictionary, dictLength)
  298. z_streamp z;
  299. const Bytef *dictionary;
  300. uInt  dictLength;
  301. #endif
  302. {
  303.   uInt length = dictLength;
  304.  
  305.   if (z == Z_NULL || z->state == Z_NULL || z->state->mode != DICT0)
  306.     return Z_STREAM_ERROR;
  307.  
  308.   if (adler32(1L, dictionary, dictLength) != z->adler) return Z_DATA_ERROR;
  309.   z->adler = 1L;
  310.  
  311.   if (length >= ((uInt)1<<z->state->wbits))
  312.   {
  313.     length = (1<<z->state->wbits)-1;
  314.     dictionary += dictLength - length;
  315.   }
  316.   inflate_set_dictionary(z->state->blocks, dictionary, length);
  317.   z->state->mode = BLOCKS;
  318.   return Z_OK;
  319. }
  320.  
  321. #if defined(__VISAGECPP__) /* Visualage can't handle this antiquated interface */
  322. int ZEXPORT inflateSync(z_streamp z)
  323. #else
  324. int ZEXPORT inflateSync(z)
  325. z_streamp z;
  326. #endif
  327. {
  328.   uInt n;       /* number of bytes to look at */
  329.   Bytef *p;     /* pointer to bytes */
  330.   uInt m;       /* number of marker bytes found in a row */
  331.   uLong r, w;   /* temporaries to save total_in and total_out */
  332.  
  333.   /* set up */
  334.   if (z == Z_NULL || z->state == Z_NULL)
  335.     return Z_STREAM_ERROR;
  336.   if (z->state->mode != BAD)
  337.   {
  338.     z->state->mode = BAD;
  339.     z->state->sub.marker = 0;
  340.   }
  341.   if ((n = z->avail_in) == 0)
  342.     return Z_BUF_ERROR;
  343.   p = z->next_in;
  344.   m = z->state->sub.marker;
  345.  
  346.   /* search */
  347.   while (n && m < 4)
  348.   {
  349.     static const Byte mark[4] = {0, 0, 0xff, 0xff};
  350.     if (*p == mark[m])
  351.       m++;
  352.     else if (*p)
  353.       m = 0;
  354.     else
  355.       m = 4 - m;
  356.     p++, n--;
  357.   }
  358.  
  359.   /* restore */
  360.   z->total_in += p - z->next_in;
  361.   z->next_in = p;
  362.   z->avail_in = n;
  363.   z->state->sub.marker = m;
  364.  
  365.   /* return no joy or set up to restart on a new block */
  366.   if (m != 4)
  367.     return Z_DATA_ERROR;
  368.   r = z->total_in;  w = z->total_out;
  369.   inflateReset(z);
  370.   z->total_in = r;  z->total_out = w;
  371.   z->state->mode = BLOCKS;
  372.   return Z_OK;
  373. }
  374.  
  375. /* Returns true if inflate is currently at the end of a block generated
  376.  * by Z_SYNC_FLUSH or Z_FULL_FLUSH. This function is used by one PPP
  377.  * implementation to provide an additional safety check. PPP uses Z_SYNC_FLUSH
  378.  * but removes the length bytes of the resulting empty stored block. When
  379.  * decompressing, PPP checks that at the end of input packet, inflate is
  380.  * waiting for these length bytes.
  381.  */
  382. #if defined(__VISAGECPP__) /* Visualage can't handle this antiquated interface */
  383. int ZEXPORT inflateSyncPoint(z_streamp z)
  384. #else
  385. int ZEXPORT inflateSyncPoint(z)
  386. z_streamp z;
  387. #endif
  388. {
  389.   if (z == Z_NULL || z->state == Z_NULL || z->state->blocks == Z_NULL)
  390.     return Z_STREAM_ERROR;
  391.   return inflate_blocks_sync_point(z->state->blocks);
  392. }
  393.