home *** CD-ROM | disk | FTP | other *** search
/ OS/2 Shareware BBS: 10 Tools / 10-Tools.zip / perl560.zip / hints / hpux.sh < prev    next >
Linux/UNIX/POSIX Shell Script  |  2000-03-14  |  13KB  |  409 lines

  1. #! /bin/sh
  2.  
  3. # hints/hpux.sh
  4. # Perl Configure hints file for Hewlett-Packard's HP-UX 9.x and 10.x
  5. # (Hopefully, 7.x through 11.x.)
  6. #
  7. # This file is based on hints/hpux_9.sh, Perl Configure hints file for
  8. # Hewlett Packard HP-UX 9.x
  9. #
  10. # Use Configure -Dcc=gcc to use gcc.
  11. #
  12. # From: Jeff Okamoto <okamoto@corp.hp.com>
  13. # and
  14. # hints/hpux_10.sh, Perl Configure hints file for Hewlett Packard HP-UX 10.x
  15. # From: Giles Lean <giles@nemeton.com.au>
  16. # and
  17. # Use #define CPU_* instead of comments for >= 10.x.
  18. # Support PA1.2 under 10.x.
  19. # Distinguish between PA2.0, PA2.1, etc.
  20. # Distinguish between MC68020, MC68030, MC68040
  21. # Don't assume every OS != 10 is < 10, (e.g., 11).
  22. # From: Chuck Phillips <cdp@fc.hp.com>
  23. # HP-UX 10 pthreads hints: Matthew T Harden <mthard@mthard1.monsanto.com>
  24. # From: Dominic Dunlop <domo@computer.org>
  25. # Abort and offer advice if bundled (non-ANSI) C compiler selected
  26.  
  27. # This version: March 8, 2000
  28. # Current maintainer: Jeff Okamoto <okamoto@corp.hp.com>
  29.  
  30. #--------------------------------------------------------------------
  31. # Use Configure -Dcc=gcc to use gcc.
  32. # Use Configure -Dprefix=/usr/local to install in /usr/local.
  33. #
  34. # You may have dynamic loading problems if the environment variable
  35. # LDOPTS='-a archive'.  Under >= 10.x, you can instead LDOPTS='-a
  36. # archive_shared' to prefer archive libraries without requiring them.
  37. # Regardless of HPUX release, in the "libs" variable or the ext.libs
  38. # file, you can always give explicit path names to archive libraries
  39. # that may not exist on the target machine.  E.g., /usr/lib/libndbm.a
  40. # instead of -lndbm.  See also note below on ndbm.
  41. #
  42. # ALSO, bear in mind that gdbm and Berkely DB contain incompatible
  43. # replacements for ndbm (and dbm) routines.  If you want concurrent
  44. # access to ndbm files, you need to make sure libndbm is linked in
  45. # *before* gdbm and Berkely DB.  Lastly, remember to check the
  46. # "ext.libs" file which is *probably* messing up the order.  Often,
  47. # you can replace ext.libs with an empty file to fix the problem.
  48. #
  49. # If you get a message about "too much defining", as may happen
  50. # in HPUX < 10, you might have to append a single entry to your
  51. # ccflags: '-Wp,-H256000'
  52. # NOTE: This is a single entry (-W takes the argument 'p,-H256000').
  53. #--------------------------------------------------------------------
  54.  
  55. # Turn on the _HPUX_SOURCE flag to get many of the HP add-ons
  56. # regardless of compiler.  For the HP ANSI C compiler, you may also
  57. # want to include +e to enable "long long" and "long double".
  58. #
  59. # HP compiler flags to include (if at all) *both* as part of ccflags
  60. # and cc itself so Configure finds (and builds) everything
  61. # consistently:
  62. #    -Aa -D_HPUX_SOURCE +e
  63. #
  64. # Lastly, you may want to include the "-z" HP linker flag so that
  65. # reading from a NULL pointer causes a SEGV.
  66. ccflags="$ccflags -D_HPUX_SOURCE"
  67.  
  68. # Check if you're using the bundled C compiler.  This compiler doesn't support
  69. # ANSI C (the -Aa flag) and so is not suitable for perl 5.5 and later.
  70. case "$cc" in
  71. '') if cc $ccflags -Aa 2>&1 | $contains 'option' >/dev/null
  72.     then
  73.          cat <<'EOM' >&4
  74.  
  75. The bundled C compiler is not ANSI-compliant, and so cannot be used to
  76. build perl.  Please see the file README.hpux for advice on alternative
  77. compilers.
  78.  
  79. Cannot continue, aborting.
  80. EOM
  81.     exit 1
  82.     else
  83.     ccflags="$ccflags -Aa"    # The add-on compiler supports ANSI C
  84.     # cppstdin and cpprun need the -Aa option if you use the unbundled 
  85.     # ANSI C compiler (*not* the bundled K&R compiler or gcc)
  86.     # [XXX this should be set automatically by Configure, but isn't yet.]
  87.     # [XXX This is reported not to work.  You may have to edit config.sh.
  88.     #  After running Configure, set cpprun and cppstdin in config.sh,
  89.     #  run "Configure -S" and then "make".]
  90.     cpprun="${cc:-cc} -E -Aa"
  91.     cppstdin="$cpprun"
  92.     cppminus='-'
  93.     cpplast='-'
  94.     fi
  95.     case "$optimize" in
  96.     # For HP's ANSI C compiler, up to "+O3" is safe for everything
  97.     # except shared libraries (PIC code).  Max safe for PIC is "+O2".
  98.     # Setting both causes innocuous warnings.
  99.     '')    optimize='-O'
  100.         #optimize='+O3'
  101.         #cccdlflags='+z +O2'
  102.         ;;
  103.     esac
  104.     cc=cc
  105.     ;;
  106. esac
  107.  
  108. case `$cc -v 2>&1`"" in
  109. *gcc*) ccisgcc="$define" ;;
  110. *) ccisgcc='' ;;
  111. esac
  112.  
  113. # Determine the architecture type of this system.
  114. # Keep leading tab below -- Configure Black Magic -- RAM, 03/02/97
  115.     xxOsRevMajor=`uname -r | sed -e 's/^[^0-9]*//' | cut -d. -f1`;
  116.     #xxOsRevMinor=`uname -r | sed -e 's/^[^0-9]*//' | cut -d. -f2`;
  117. if [ "$xxOsRevMajor" -ge 10 ]
  118. then
  119.     # This system is running >= 10.x
  120.  
  121.     # Tested on 10.01 PA1.x and 10.20 PA[12].x.  Idea: Scan
  122.     # /usr/include/sys/unistd.h for matches with "#define CPU_* `getconf
  123.     # CPU_VERSION`" to determine CPU type.  Note the part following
  124.     # "CPU_" is used, *NOT* the comment.
  125.     #
  126.     # ASSUMPTIONS: Numbers will continue to be defined in hex -- and in
  127.     # /usr/include/sys/unistd.h -- and the CPU_* #defines will be kept
  128.     # up to date with new CPU/OS releases.
  129.     xxcpu=`getconf CPU_VERSION`; # Get the number.
  130.     xxcpu=`printf '0x%x' $xxcpu`; # convert to hex
  131.     archname=`sed -n -e "s/^#[ \t]*define[ \t]*CPU_//p" /usr/include/sys/unistd.h |
  132.         sed -n -e "s/[ \t]*$xxcpu[ \t].*//p" |
  133.         sed -e s/_RISC/-RISC/ -e s/HP_// -e s/_/./`;
  134. else
  135.     # This system is running <= 9.x
  136.     # Tested on 9.0[57] PA and [78].0 MC680[23]0.  Idea: After removing
  137.     # MC6888[12] from context string, use first CPU identifier.
  138.     #
  139.     # ASSUMPTION: Only CPU identifiers contain no lowercase letters.
  140.     archname=`getcontext | tr ' ' '\012' | grep -v '[a-z]' | grep -v MC688 |
  141.         sed -e 's/HP-//' -e 1q`;
  142.     selecttype='int *'
  143. fi
  144.  
  145. # Do this right now instead of the delayed callback unit approach.
  146. case "$use64bitall" in
  147. $define|true|[yY]*) use64bitint="$define" ;;
  148. esac
  149. case "$use64bitint" in
  150. $define|true|[yY]*)
  151.     if [ "$xxOsRevMajor" -lt 11 ]; then
  152.         cat <<EOM >&4
  153.  
  154. 64-bit compilation is not supported on HP-UX $xxOsRevMajor.
  155. You need at least HP-UX 11.0.
  156. Cannot continue, aborting.
  157.  
  158. EOM
  159.         exit 1
  160.     fi
  161.  
  162.     # Without the 64-bit libc we cannot do much.
  163.     libc='/lib/pa20_64/libc.sl'
  164.     if [ ! -f "$libc" ]; then
  165.         cat <<EOM >&4
  166.  
  167. *** You do not seem to have the 64-bit libraries in /lib/pa20_64.
  168. *** Most importantly, I cannot find the $libc.
  169. *** Cannot continue, aborting.
  170.  
  171. EOM
  172.         exit 1
  173.     fi
  174.  
  175.     ccflags="$ccflags +DD64"
  176.     ldflags="$ldflags +DD64"
  177.     test -d /lib/pa20_64 && loclibpth="$loclibpth /lib/pa20_64"
  178.     libscheck='case "`/usr/bin/file $xxx`" in
  179. *LP64*|*PA-RISC2.0*) ;;
  180. *) xxx=/no/64-bit$xxx ;;
  181. esac'
  182.     if test -n "$ccisgcc" -o -n "$gccversion"; then
  183.     ld="$cc"
  184.     else    
  185.     ld=/usr/bin/ld
  186.     fi
  187.     ar=/usr/bin/ar
  188.     full_ar=$ar
  189.  
  190.     if test -z "$ccisgcc" -a -z "$gccversion"; then
  191.        # The strict ANSI mode (-Aa) doesn't like the LL suffixes.
  192.        ccflags=`echo " $ccflags "|sed 's@ -Aa @ @g'`
  193.        case "$ccflags" in
  194.        *-Ae*) ;;
  195.        *) ccflags="$ccflags -Ae" ;;
  196.        esac
  197.     fi
  198.  
  199.     set `echo " $libswanted " | sed -e 's@ dl @ @'`
  200.     libswanted="$*"
  201.  
  202.     ;;
  203. esac
  204.  
  205. case "$ccisgcc" in
  206. # Even if you use gcc, prefer the HP math library over the GNU one.
  207. "$define") test -d /lib/pa1.1 && ccflags="$ccflags -L/lib/pa1.1" ;;
  208. esac
  209.     
  210. case "$ccisgcc" in
  211. "$define") ;;
  212. *)  case "`getconf KERNEL_BITS 2>/dev/null`" in
  213.     *64*) ldflags="$ldflags -Wl,+vnocompatwarnings" ;;
  214.     esac
  215.     ;;
  216. esac
  217.  
  218. # Remove bad libraries that will cause problems
  219. # (This doesn't remove libraries that don't actually exist)
  220. # -lld is unneeded (and I can't figure out what it's used for anyway)
  221. # -ldbm is obsolete and should not be used
  222. # -lBSD contains BSD-style duplicates of SVR4 routines that cause confusion
  223. # -lPW is obsolete and should not be used
  224. # The libraries crypt, malloc, ndir, and net are empty.
  225. # Although -lndbm should be included, it will make perl blow up if you should
  226. # copy the binary to a system without libndbm.sl.  See ccdlflags below.
  227. set `echo " $libswanted " | sed -e 's@ ld @ @' -e 's@ dbm @ @' -e 's@ BSD @ @' -e 's@ PW @ @'`
  228. libswanted="$*"
  229.  
  230. # By setting the deferred flag below, this means that if you run perl
  231. # on a system that does not have the required shared library that you
  232. # linked it with, it will die when you try to access a symbol in the
  233. # (missing) shared library.  If you would rather know at perl startup
  234. # time that you are missing an important shared library, switch the
  235. # comments so that immediate, rather than deferred loading is
  236. # performed.  Even with immediate loading, you can postpone errors for
  237. # undefined (or multiply defined) routines until actual access by
  238. # adding the "nonfatal" option.
  239. # ccdlflags="-Wl,-E -Wl,-B,immediate $ccdlflags"
  240. # ccdlflags="-Wl,-E -Wl,-B,immediate,-B,nonfatal $ccdlflags"
  241. ccdlflags="-Wl,-E -Wl,-B,deferred $ccdlflags"
  242.  
  243. case "$usemymalloc" in
  244. '') usemymalloc='y' ;;
  245. esac
  246.  
  247. alignbytes=8
  248. # For native nm, you need "-p" to produce BSD format output.
  249. nm_opt='-p'
  250.  
  251. # When HP-UX runs a script with "#!", it sets argv[0] to the script name.
  252. toke_cflags='ccflags="$ccflags -DARG_ZERO_IS_SCRIPT"'
  253.  
  254. # If your compile complains about FLT_MIN, uncomment the next line
  255. # POSIX_cflags='ccflags="$ccflags -DFLT_MIN=1.17549435E-38"'
  256.  
  257. # Comment this out if you don't want to follow the SVR4 filesystem layout
  258. # that HP-UX 10.0 uses
  259. case "$prefix" in
  260. '') prefix='/opt/perl5' ;;
  261. esac
  262.  
  263. # HP-UX can't do setuid emulation offered by Configure
  264. case "$d_dosuid" in
  265. '') d_dosuid="$undef" ;;
  266. esac
  267.  
  268. # HP-UX 11 groks also LD_LIBRARY_PATH but SHLIB_PATH
  269. # is recommended for compatibility.
  270. case "$ldlibpthname" in
  271. '') ldlibpthname=SHLIB_PATH ;;
  272. esac
  273.  
  274. # HP-UX 10.20 and gcc 2.8.1 break UINT32_MAX.
  275. case "$ccisgcc" in
  276. "$define") ccflags="$ccflags -DUINT32_MAX_BROKEN" ;;
  277. esac
  278.  
  279. cat > UU/cc.cbu <<'EOSH'
  280. # XXX This script UU/cc.cbu will get 'called-back' by Configure after it
  281. # XXX has prompted the user for the C compiler to use.
  282. # Get gcc to share its secrets.
  283. echo 'main() { return 0; }' > try.c
  284.     # Indent to avoid propagation to config.sh
  285.     verbose=`${cc:-cc} -v -o try try.c 2>&1`
  286. if echo "$verbose" | grep '^Reading specs from' >/dev/null 2>&1; then
  287.     # Using gcc.
  288.     : nothing to see here, move on.
  289. else
  290.     # Using cc.
  291.         ar=${ar:-ar}
  292.     case "`$ar -V 2>&1`" in
  293.     *GNU*)
  294.         if test -x /usr/bin/ar; then
  295.             cat <<END >&2
  296.  
  297. *** You are using HP cc(1) but GNU ar(1).  This might lead into trouble
  298. *** later on, I'm switching to HP ar to play safe.
  299.  
  300. END
  301.         ar=/usr/bin/ar
  302.         fi
  303.     ;;
  304.     esac
  305. fi
  306.  
  307. EOSH
  308.  
  309. # Date: Fri, 6 Sep 96 23:15:31 CDT
  310. # From: "Daniel S. Lewart" <d-lewart@uiuc.edu>
  311. # I looked through the gcc.info and found this:
  312. #   * GNU CC compiled code sometimes emits warnings from the HP-UX
  313. #     assembler of the form:
  314. #          (warning) Use of GR3 when frame >= 8192 may cause conflict.
  315. #     These warnings are harmless and can be safely ignored.
  316.  
  317. cat > UU/usethreads.cbu <<'EOCBU'
  318. # This script UU/usethreads.cbu will get 'called-back' by Configure 
  319. # after it has prompted the user for whether to use threads.
  320. case "$usethreads" in
  321. $define|true|[yY]*)
  322.         if [ "$xxOsRevMajor" -lt 10 ]; then
  323.             cat <<EOM >&4
  324. HP-UX $xxOsRevMajor cannot support POSIX threads.
  325. Consider upgrading to at least HP-UX 11.
  326. Cannot continue, aborting.
  327. EOM
  328.             exit 1
  329.         fi
  330.         case "$xxOsRevMajor" in
  331.         10)
  332.             # Under 10.X, a threaded perl can be built, but it needs
  333.             # libcma and OLD_PTHREADS_API.  Also <pthread.h> needs to
  334.             # be #included before any other includes (in perl.h)
  335.             if [ ! -f /usr/include/pthread.h -o ! -f /usr/lib/libcma.sl ]; then
  336.                 cat <<EOM >&4
  337. In HP-UX 10.X for POSIX threads you need both of the files
  338. /usr/include/pthread.h and /usr/lib/libcma.sl.
  339. Either you must install the CMA package or you must upgrade to HP-UX 11.
  340. Cannot continue, aborting.
  341. EOM
  342.                  exit 1
  343.             fi
  344.  
  345.             # HP-UX 10.X uses the old pthreads API
  346.             case "$d_oldpthreads" in
  347.             '') d_oldpthreads="$define" ;;
  348.             esac
  349.  
  350.             # include libcma before all the others
  351.             libswanted="cma $libswanted"
  352.  
  353.             # tell perl.h to include <pthread.h> before other include files
  354.             ccflags="$ccflags -DPTHREAD_H_FIRST"
  355.  
  356.             # CMA redefines select to cma_select, and cma_select expects int *
  357.             # instead of fd_set * (just like 9.X)
  358.             selecttype='int *'
  359.             ;;
  360.         11 | 12) # 12 may want upping the _POSIX_C_SOURCE datestamp...
  361.             ccflags=" -D_POSIX_C_SOURCE=199506L $ccflags"
  362.             set `echo X "$libswanted "| sed -e 's/ c / pthread c /'`
  363.             shift
  364.             libswanted="$*"
  365.         ;;
  366.         esac
  367.     usemymalloc='n'
  368.     ;;
  369. esac
  370. EOCBU
  371.  
  372. case "$uselargefiles-$ccisgcc" in
  373. "$define-$define"|'-define') 
  374.     cat <<EOM >&4
  375.  
  376. *** I'm ignoring large files for this build because
  377. *** I don't know how to do use large files in HP-UX using gcc.
  378.  
  379. EOM
  380.     uselargefiles="$undef"
  381.     ;;
  382. esac
  383.  
  384. cat > UU/uselargefiles.cbu <<'EOCBU'
  385. # This script UU/uselargefiles.cbu will get 'called-back' by Configure 
  386. # after it has prompted the user for whether to use large files.
  387. case "$uselargefiles" in
  388. ''|$define|true|[yY]*)
  389.     # there are largefile flags available via getconf(1)
  390.     # but we cheat for now.
  391.     ccflags="$ccflags -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64"
  392.  
  393.         if test -z "$ccisgcc" -a -z "$gccversion"; then
  394.            # The strict ANSI mode (-Aa) doesn't like large files.
  395.            ccflags=`echo " $ccflags "|sed 's@ -Aa @ @g'`
  396.            case "$ccflags" in
  397.            *-Ae*) ;;
  398.            *) ccflags="$ccflags -Ae" ;;
  399.            esac
  400.     fi
  401.  
  402.     ;;
  403. esac
  404. EOCBU
  405.  
  406. # keep that leading tab.
  407.     ccisgcc=''
  408.  
  409.