home *** CD-ROM | disk | FTP | other *** search
/ OS/2 Shareware BBS: 10 Tools / 10-Tools.zip / perl502b.zip / pod / perldiag.pod < prev    next >
Text File  |  1996-01-31  |  78KB  |  2,327 lines

  1. =head1 NAME
  2.  
  3. perldiag - various Perl diagnostics
  4.  
  5. =head1 DESCRIPTION
  6.  
  7. These messages are classified as follows (listed in increasing order of
  8. desperation):
  9.  
  10.     (W) A warning (optional).
  11.     (D) A deprecation (optional).
  12.     (S) A severe warning (mandatory).
  13.     (F) A fatal error (trappable).
  14.     (P) An internal error you should never see (trappable).
  15.     (X) A very fatal error (non-trappable).
  16.     (A) An alien error message (not generated by Perl).
  17.  
  18. Optional warnings are enabled by using the B<-w> switch.  Warnings may
  19. be captured by setting C<$^Q> to a reference to a routine that will be
  20. called on each warning instead of printing it.  See L<perlvar>.
  21. Trappable errors may be trapped using the eval operator.  See
  22. L<perlfunc/eval>.
  23.  
  24. Some of these messages are generic.  Spots that vary are denoted with a %s,
  25. just as in a printf format.  Note that some message start with a %s!
  26. The symbols C<"%-?@> sort before the letters, while C<[> and C<\> sort after.
  27.  
  28. =over 4
  29.  
  30. =item "my" variable %s can't be in a package
  31.  
  32. (F) Lexically scoped variables aren't in a package, so it doesn't make sense
  33. to try to declare one with a package qualifier on the front.  Use local()
  34. if you want to localize a package variable.
  35.  
  36. =item "no" not allowed in expression
  37.  
  38. (F) The "no" keyword is recognized and executed at compile time, and returns
  39. no useful value.  See L<perlmod>.
  40.  
  41. =item "use" not allowed in expression
  42.  
  43. (F) The "use" keyword is recognized and executed at compile time, and returns
  44. no useful value.  See L<perlmod>.
  45.  
  46. =item % may only be used in unpack
  47.  
  48. (F) You can't pack a string by supplying a checksum, since the
  49. checksumming process loses information, and you can't go the other
  50. way.  See L<perlfunc/unpack>.
  51.  
  52. =item %s (...) interpreted as function
  53.  
  54. (W) You've run afoul of the rule that says that any list operator followed
  55. by parentheses turns into a function, with all the list operators arguments 
  56. found inside the parens.  See L<perlop/Terms and List Operators (Leftward)>.
  57.  
  58. =item %s argument is not a HASH element
  59.  
  60. (F) The argument to delete() or exists() must be a hash element, such as
  61.  
  62.     $foo{$bar}
  63.     $ref->[12]->{"susie"}
  64.  
  65. =item %s did not return a true value
  66.  
  67. (F) A required (or used) file must return a true value to indicate that
  68. it compiled correctly and ran its initialization code correctly.  It's
  69. traditional to end such a file with a "1;", though any true value would
  70. do.  See L<perlfunc/require>.
  71.  
  72. =item %s found where operator expected
  73.  
  74. (S) The Perl lexer knows whether to expect a term or an operator.  If it
  75. sees what it knows to be a term when it was expecting to see an operator,
  76. it gives you this warning.  Usually it indicates that an operator or
  77. delimiter was omitted, such as a semicolon.
  78.  
  79. =item %s had compilation errors.
  80.  
  81. (F) The final summary message when a C<perl -c> fails.
  82.  
  83. =item %s has too many errors.
  84.  
  85. (F) The parser has given up trying to parse the program after 10 errors.
  86. Further error messages would likely be uninformative.
  87.  
  88. =item %s matches null string many times
  89.  
  90. (W) The pattern you've specified would be an infinite loop if the
  91. regular expression engine didn't specifically check for that.  See L<perlre>.
  92.  
  93. =item %s never introduced
  94.  
  95. (S) The symbol in question was declared but somehow went out of scope
  96. before it could possibly have been used.
  97.  
  98. =item %s syntax OK
  99.  
  100. (F) The final summary message when a C<perl -c> succeeds.
  101.  
  102. =item %s: Command not found.
  103.  
  104. (A) You've accidentally run your script through B<csh> instead
  105. of Perl.  Check the <#!> line, or manually feed your script
  106. into Perl yourself.
  107.  
  108. =item %s: Expression syntax.
  109.  
  110. (A) You've accidentally run your script through B<csh> instead
  111. of Perl.  Check the <#!> line, or manually feed your script
  112. into Perl yourself.
  113.  
  114. =item %s: Undefined variable.
  115.  
  116. (A) You've accidentally run your script through B<csh> instead
  117. of Perl.  Check the <#!> line, or manually feed your script
  118. into Perl yourself.
  119.  
  120. =item %s: not found
  121.  
  122. (A) You've accidentally run your script through the Bourne shell 
  123. instead of Perl.  Check the <#!> line, or manually feed your script
  124. into Perl yourself.
  125.  
  126. =item B<-P> not allowed for setuid/setgid script
  127.  
  128. (F) The script would have to be opened by the C preprocessor by name,
  129. which provides a race condition that breaks security.
  130.  
  131. =item C<-T> and C<-B> not implemented on filehandles
  132.  
  133. (F) Perl can't peek at the stdio buffer of filehandles when it doesn't
  134. know about your kind of stdio.  You'll have to use a filename instead.
  135.  
  136. =item ?+* follows nothing in regexp
  137.  
  138. (F) You started a regular expression with a quantifier.  Backslash it
  139. if you meant it literally.   See L<perlre>.
  140.  
  141. =item @ outside of string
  142.  
  143. (F) You had a pack template that specified an absolution position outside
  144. the string being unpacked.  See L<perlfunc/pack>.
  145.  
  146. =item accept() on closed fd
  147.  
  148. (W) You tried to do an accept on a closed socket.  Did you forget to check
  149. the return value of your socket() call?  See L<perlfunc/accept>.
  150.  
  151. =item Allocation too large: %lx
  152.  
  153. (F) You can't allocate more than 64K on an MSDOS machine.
  154.  
  155. =item Arg too short for msgsnd
  156.  
  157. (F) msgsnd() requires a string at least as long as sizeof(long).
  158.  
  159. =item Ambiguous use of %s resolved as %s
  160.  
  161. (W)(S) You said something that may not be interpreted the way
  162. you thought.  Normally it's pretty easy to disambiguate it by supplying
  163. a missing quote, operator, paren pair or declaration.
  164.  
  165. =item Args must match #! line
  166.  
  167. (F) The setuid emulator requires that the arguments Perl was invoked
  168. with match the arguments specified on the #! line.
  169.  
  170. =item Argument "%s" isn't numeric
  171.  
  172. (W) The indicated string was fed as an argument to an operator that
  173. expected a numeric value instead.  If you're fortunate the message
  174. will identify which operator was so unfortunate.
  175.  
  176. =item Array @%s missing the @ in argument %d of %s()
  177.  
  178. (D) Really old Perl let you omit the @ on array names in some spots.  This
  179. is now heavily deprecated.
  180.  
  181. =item assertion botched: %s
  182.  
  183. (P) The malloc package that comes with Perl had an internal failure.
  184.  
  185. =item Assertion failed: file "%s"
  186.  
  187. (P) A general assertion failed.  The file in question must be examined.
  188.  
  189. =item Assignment to both a list and a scalar
  190.  
  191. (F) If you assign to a conditional operator, the 2nd and 3rd arguments
  192. must either both be scalars or both be lists.  Otherwise Perl won't
  193. know which context to supply to the right side.
  194.  
  195. =item Attempt to free non-arena SV: 0x%lx
  196.  
  197. (P) All SV objects are supposed to be allocated from arenas that will
  198. be garbage collected on exit.  An SV was discovered to be outside any
  199. of those arenas.
  200.  
  201. =item Attempt to free temp prematurely
  202.  
  203. (W) Mortalized values are supposed to be freed by the free_tmps()
  204. routine.  This indicates that something else is freeing the SV before
  205. the free_tmps() routine gets a chance, which means that the free_tmps()
  206. routine will be freeing an unreferenced scalar when it does try to free
  207. it.
  208.  
  209. =item Attempt to free unreferenced glob pointers
  210.  
  211. (P) The reference counts got screwed up on symbol aliases.
  212.  
  213. =item Attempt to free unreferenced scalar
  214.  
  215. (W) Perl went to decrement the reference count of a scalar to see if it
  216. would go to 0, and discovered that it had already gone to 0 earlier,
  217. and should have been freed, and in fact, probably was freed.  This
  218. could indicate that SvREFCNT_dec() was called too many times, or that
  219. SvREFCNT_inc() was called too few times, or that the SV was mortalized
  220. when it shouldn't have been, or that memory has been corrupted.
  221.  
  222. =item Bad arg length for %s, is %d, should be %d
  223.  
  224. (F) You passed a buffer of the wrong size to one of msgctl(), semctl() or
  225. shmctl().  In C parlance, the correct sized are, respectively,
  226. S<sizeof(struct msqid_ds *)>, S<sizeof(struct semid_ds *)> and
  227. S<sizeof(struct shmid_ds *)>.
  228.  
  229. =item Bad associative array
  230.  
  231. (P) One of the internal hash routines was passed a null HV pointer.
  232.  
  233. =item Bad filehandle: %s
  234.  
  235. (F) A symbol was passed to something wanting a filehandle, but the symbol
  236. has no filehandle associated with it.  Perhaps you didn't do an open(), or
  237. did it in another package.
  238.  
  239. =item Bad free() ignored
  240.  
  241. (S) An internal routine called free() on something that had never been
  242. malloc()ed in the first place.
  243.  
  244. =item Bad name after %s::
  245.  
  246. (F) You started to name a symbol by using a package prefix, and then didn't
  247. finish the symbol.  In particular, you can't interpolate outside of quotes,
  248. so
  249.  
  250.     $var = 'myvar';
  251.     $sym = mypack::$var;
  252.  
  253. is not the same as
  254.  
  255.     $var = 'myvar';
  256.     $sym = "mypack::$var";
  257.  
  258. =item Bad symbol for array
  259.  
  260. (P) An internal request asked to add an array entry to something that
  261. wasn't a symbol table entry.
  262.  
  263. =item Bad symbol for filehandle
  264.  
  265. (P) An internal request asked to add a filehandle entry to something that
  266. wasn't a symbol table entry.
  267.  
  268. =item Bad symbol for hash
  269.  
  270. (P) An internal request asked to add a hash entry to something that
  271. wasn't a symbol table entry.
  272.  
  273. =item Badly places ()'s
  274.  
  275. (A) You've accidentally run your script through B<csh> instead
  276. of Perl.  Check the <#!> line, or manually feed your script
  277. into Perl yourself.
  278.  
  279. =item BEGIN failed--compilation aborted
  280.  
  281. (F) An untrapped exception was raised while executing a BEGIN subroutine.
  282. Compilation stops immediately and the interpreter is exited.
  283.  
  284. =item bind() on closed fd
  285.  
  286. (W) You tried to do a bind on a closed socket.  Did you forget to check
  287. the return value of your socket() call?  See L<perlfunc/bind>.
  288.  
  289. =item Bizarre copy of %s in %s
  290.  
  291. (P) Perl detected an attempt to copy an internal value that is not copiable.
  292.  
  293. =item Callback called exit
  294.  
  295. (F) A subroutine invoked from an external package via perl_call_sv()
  296. exited by calling exit.
  297.  
  298. =item Can't "last" outside a block
  299.  
  300. (F) A "last" statement was executed to break out of the current block,
  301. except that there's this itty bitty problem called there isn't a
  302. current block.  Note that an "if" or "else" block doesn't count as a
  303. "loopish" block.  You can usually double the curlies to get the same
  304. effect though, since the inner curlies will be considered a block
  305. that loops once.  See L<perlfunc/last>.
  306.  
  307. =item Can't "next" outside a block
  308.  
  309. (F) A "next" statement was executed to reiterate the current block, but
  310. there isn't a current block.  Note that an "if" or "else" block doesn't
  311. count as a "loopish" block.  You can usually double the curlies to get
  312. the same effect though, since the inner curlies will be considered a block
  313. that loops once.  See L<perlfunc/last>.
  314.  
  315. =item Can't "redo" outside a block
  316.  
  317. (F) A "redo" statement was executed to restart the current block, but
  318. there isn't a current block.  Note that an "if" or "else" block doesn't
  319. count as a "loopish" block.  You can usually double the curlies to get
  320. the same effect though, since the inner curlies will be considered a block
  321. that loops once.  See L<perlfunc/last>.
  322.  
  323. =item Can't bless non-reference value
  324.  
  325. (F) Only hard references may be blessed.  This is how Perl "enforces"
  326. encapsulation of objects.  See L<perlobj>.
  327.  
  328. =item Can't break at that line
  329.  
  330. (S) A warning intended for while running within the debugger, indicating
  331. the line number specified wasn't the location of a statement that could
  332. be stopped at.
  333.  
  334. =item Can't call method "%s" in empty package "%s"
  335.  
  336. (F) You called a method correctly, and it correctly indicated a package
  337. functioning as a class, but that package doesn't have ANYTHING defined
  338. in it, let alone methods.  See L<perlobj>.
  339.  
  340. =item Can't call method "%s" on unblessed reference
  341.  
  342. (F) A method call must know what package it's supposed to run in.  It
  343. ordinarily finds this out from the object reference you supply, but
  344. you didn't supply an object reference in this case.  A reference isn't
  345. an object reference until it has been blessed.  See L<perlobj>.
  346.  
  347. =item Can't call method "%s" without a package or object reference
  348.  
  349. (F) You used the syntax of a method call, but the slot filled by the
  350. object reference or package name contains an expression that returns
  351. neither an object reference nor a package name.  (Perhaps it's null?)
  352. Something like this will reproduce the error:
  353.  
  354.     $BADREF = undef;
  355.     process $BADREF 1,2,3;
  356.     $BADREF->process(1,2,3);
  357.  
  358. =item Can't chdir to %s
  359.  
  360. (F) You called C<perl -x/foo/bar>, but C</foo/bar> is not a directory
  361. that you can chdir to, possibly because it doesn't exist.
  362.  
  363. =item Can't coerce %s to integer in %s
  364.  
  365. (F) Certain types of SVs, in particular real symbol table entries
  366. (type GLOB), can't be forced to stop being what they are.  So you can't
  367. say things like:
  368.  
  369.     *foo += 1;
  370.  
  371. You CAN say
  372.  
  373.     $foo = *foo;
  374.     $foo += 1;
  375.  
  376. but then $foo no longer contains a glob.
  377.  
  378. =item Can't coerce %s to number in %s
  379.  
  380. (F) Certain types of SVs, in particular real symbol table entries
  381. (type GLOB), can't be forced to stop being what they are.
  382.  
  383. =item Can't coerce %s to string in %s
  384.  
  385. (F) Certain types of SVs, in particular real symbol table entries
  386. (type GLOB), can't be forced to stop being what they are.
  387.  
  388. =item Can't create pipe mailbox
  389.  
  390. (P) An error peculiar to VMS.  The process is suffering from exhausted quotas
  391. or other plumbing problems.
  392.  
  393. =item Can't declare %s in my
  394.  
  395. (F) Only scalar, array and hash variables may be declared as lexical variables.
  396. They must have ordinary identifiers as names.
  397.  
  398. =item Can't do inplace edit on %s: %s
  399.  
  400. (S) The creation of the new file failed for the indicated reason.
  401.  
  402. =item Can't do inplace edit without backup
  403.  
  404. (F) You're on a system such as MSDOS that gets confused if you try reading
  405. from a deleted (but still opened) file.  You have to say B<-i>C<.bak>, or some
  406. such.
  407.  
  408. =item Can't do inplace edit: %s > 14 characters
  409.  
  410. (S) There isn't enough room in the filename to make a backup name for the file.
  411.  
  412. =item Can't do inplace edit: %s is not a regular file
  413.  
  414. (S) You tried to use the B<-i> switch on a special file, such as a file in
  415. /dev, or a FIFO.  The file was ignored.
  416.  
  417. =item Can't do setegid!
  418.  
  419. (P) The setegid() call failed for some reason in the setuid emulator
  420. of suidperl.
  421.  
  422. =item Can't do seteuid!
  423.  
  424. (P) The setuid emulator of suidperl failed for some reason.
  425.  
  426. =item Can't do setuid
  427.  
  428. (F) This typically means that ordinary perl tried to exec suidperl to
  429. do setuid emulation, but couldn't exec it.  It looks for a name of the
  430. form sperl5.000 in the same directory that the perl executable resides
  431. under the name perl5.000, typically /usr/local/bin on Unix machines.
  432. If the file is there, check the execute permissions.  If it isn't, ask
  433. your sysadmin why he and/or she removed it.
  434.  
  435. =item Can't do waitpid with flags
  436.  
  437. (F) This machine doesn't have either waitpid() or wait4(), so only waitpid()
  438. without flags is emulated.
  439.  
  440. =item Can't do {n,m} with n > m
  441.  
  442. (F) Minima must be less than or equal to maxima.  If you really want
  443. your regexp to match something 0 times, just put {0}.  See L<perlre>.
  444.  
  445. =item Can't emulate -%s on #! line
  446.  
  447. (F) The #! line specifies a switch that doesn't make sense at this point.
  448. For example, it'd be kind of silly to put a B<-x> on the #! line.
  449.  
  450. =item Can't exec "%s": %s
  451.  
  452. (W) An system(), exec() or piped open call could not execute the named
  453. program for the indicated reason.  Typical reasons include: the permissions
  454. were wrong on the file, the file wasn't found in C<$ENV{PATH}>, the
  455. executable in question was compiled for another architecture, or the
  456. #! line in a script points to an interpreter that can't be run for
  457. similar reasons.  (Or maybe your system doesn't support #! at all.)
  458.  
  459. =item Can't exec %s
  460.  
  461. (F) Perl was trying to execute the indicated program for you because that's
  462. what the #! line said.  If that's not what you wanted, you may need to
  463. mention "perl" on the #! line somewhere.
  464.  
  465. =item Can't execute %s
  466.  
  467. (F) You used the B<-S> switch, but the script to execute could not be found
  468. in the PATH, or at least not with the correct permissions.
  469.  
  470. =item Can't find label %s
  471.  
  472. (F) You said to goto a label that isn't mentioned anywhere that it's possible
  473. for us to go to.  See L<perlfunc/goto>.
  474.  
  475. =item Can't find string terminator %s anywhere before EOF
  476.  
  477. (F) Perl strings can stretch over multiple lines.  This message means that
  478. the closing delimiter was omitted.  Since bracketed quotes count nesting
  479. levels, the following is missing its final parenthesis:
  480.  
  481.     print q(The character '(' starts a side comment.)
  482.  
  483. =item Can't fork
  484.  
  485. (F) A fatal error occurred while trying to fork while opening a pipeline.
  486.  
  487. =item Can't get filespec - stale stat buffer?
  488.  
  489. (S) A warning peculiar to VMS.  This arises because of the difference between
  490. access checks under VMS and under the Unix model Perl assumes.  Under VMS,
  491. access checks are done by filename, rather than by bits in the stat buffer, so
  492. that ACLs and other protections can be taken into account.  Unfortunately, Perl
  493. assumes that the stat buffer contains all the necessary information, and passes
  494. it, instead of the filespec, to the access checking routine.  It will try to
  495. retrieve the filespec using the device name and FID present in the stat buffer,
  496. but this works only if you haven't made a subsequent call to the CRTL stat()
  497. routine, since the device name is overwritten with each call.  If this warning
  498. appears, the name lookup failed, and the access checking routine gave up and
  499. returned FALSE, just to be conservative.  (Note: The access checking routine
  500. knows about the Perl C<stat> operator and file tests, so you shouldn't ever
  501. see this warning in response to a Perl command; it arises only if some internal
  502. code takes stat buffers lightly.)
  503.  
  504. =item Can't get pipe mailbox device name
  505.  
  506. (P) An error peculiar to VMS.  After creating a mailbox to act as a pipe, Perl
  507. can't retrieve its name for later use.
  508.  
  509. =item Can't get SYSGEN parameter value for MAXBUF
  510.  
  511. (P) An error peculiar to VMS.  Perl asked $GETSYI how big you want your
  512. mailbox buffers to be, and didn't get an answer.
  513.  
  514. =item Can't goto subroutine outside a subroutine
  515.  
  516. (F) The deeply magical "goto subroutine" call can only replace one subroutine
  517. call for another.  It can't manufacture one out of whole cloth.  In general
  518. you should only be calling it out of an AUTOLOAD routine anyway.  See
  519. L<perlfunc/goto>.
  520.  
  521. =item Can't localize a reference
  522.  
  523. (F) You said something like C<local $$ref>, which is not allowed because
  524. the compiler can't determine whether $ref will end up pointing to anything
  525. with a symbol table entry, and a symbol table entry is necessary to
  526. do a local.
  527.  
  528. =item Can't localize lexical variable %s
  529.  
  530. (F) You used local on a variable name that was previous declared as a
  531. lexical variable using "my".  This is not allowed.  If you want to
  532. localize a package variable of the same name, qualify it with the
  533. package name.
  534.  
  535. =item Can't locate %s in @INC
  536.  
  537. (F) You said to do (or require, or use) a file that couldn't be found
  538. in any of the libraries mentioned in @INC.  Perhaps you need to set
  539. the PERL5LIB environment variable to say where the extra library is,
  540. or maybe the script needs to add the library name to @INC.  Or maybe
  541. you just misspelled the name of the file.  See L<perlfunc/require>.
  542.  
  543. =item Can't locate object method "%s" via package "%s"
  544.  
  545. (F) You called a method correctly, and it correctly indicated a package
  546. functioning as a class, but that package doesn't define that particular
  547. method, nor does any of it's base classes.  See L<perlobj>.
  548.  
  549. =item Can't locate package %s for @%s::ISA
  550.  
  551. (W) The @ISA array contained the name of another package that doesn't seem
  552. to exist.
  553.  
  554. =item Can't mktemp()
  555.  
  556. (F) The mktemp() routine failed for some reason while trying to process
  557. a B<-e> switch.  Maybe your /tmp partition is full, or clobbered.
  558.  
  559. =item Can't modify %s in %s
  560.  
  561. (F) You aren't allowed to assign to the item indicated, or otherwise try to
  562. change it, such as with an autoincrement.
  563.  
  564. =item Can't modify non-existent substring
  565.  
  566. (P) The internal routine that does assignment to a substr() was handed
  567. a NULL.
  568.  
  569. =item Can't msgrcv to readonly var
  570.  
  571. (F) The target of a msgrcv must be modifiable in order to be used as a receive
  572. buffer.
  573.  
  574. =item Can't open %s: %s
  575.  
  576. (S) An inplace edit couldn't open the original file for the indicated reason.
  577. Usually this is because you don't have read permission for the file.
  578.  
  579. =item Can't open bidirectional pipe
  580.  
  581. (W) You tried to say C<open(CMD, "|cmd|")>, which is not supported.  You can
  582. try any of several modules in the Perl library to do this, such as
  583. "open2.pl".  Alternately, direct the pipe's output to a file using ">",
  584. and then read it in under a different file handle.
  585.  
  586. =item Can't open error file %s as stderr
  587.  
  588. (F) An error peculiar to VMS.  Perl does its own command line redirection, and
  589. couldn't open the file specified after '2>' or '2>>' on the command line for
  590. writing.
  591.  
  592. =item Can't open input file %s as stdin
  593.  
  594. (F) An error peculiar to VMS.  Perl does its own command line redirection, and
  595. couldn't open the file specified after '<' on the command line for reading.
  596.  
  597. =item Can't open output file %s as stdout
  598.  
  599. (F) An error peculiar to VMS.  Perl does its own command line redirection, and
  600. couldn't open the file specified after '>' or '>>' on the command line for
  601. writing.
  602.  
  603. =item Can't open output pipe (name: %s)
  604.  
  605. (P) An error peculiar to VMS.  Perl does its own command line redirection, and
  606. couldn't open the pipe into which to send data destined for stdout.
  607.  
  608. =item Can't open perl script "%s": %s
  609.  
  610. (F) The script you specified can't be opened for the indicated reason.
  611.  
  612. =item Can't rename %s to %s: %s, skipping file
  613.  
  614. (S) The rename done by the B<-i> switch failed for some reason, probably because
  615. you don't have write permission to the directory.
  616.  
  617. =item Can't reopen input pipe (name: %s) in binary mode
  618.  
  619. (P) An error peculiar to VMS.  Perl thought stdin was a pipe, and tried to
  620. reopen it to accept binary data.  Alas, it failed.
  621.  
  622. =item Can't reswap uid and euid
  623.  
  624. (P) The setreuid() call failed for some reason in the setuid emulator
  625. of suidperl.
  626.  
  627. =item Can't return outside a subroutine
  628.  
  629. (F) The return statement was executed in mainline code, that is, where
  630. there was no subroutine call to return out of.  See L<perlsub>.
  631.  
  632. =item Can't stat script "%s"
  633.  
  634. (P) For some reason you can't fstat() the script even though you have
  635. it open already.  Bizarre.
  636.  
  637. =item Can't swap uid and euid
  638.  
  639. (P) The setreuid() call failed for some reason in the setuid emulator
  640. of suidperl.
  641.  
  642. =item Can't take log of %g
  643.  
  644. (F) Logarithms are only defined on positive real numbers.
  645.  
  646. =item Can't take sqrt of %g
  647.  
  648. (F) For ordinary real numbers, you can't take the square root of a
  649. negative number.  There's a Complex package available for Perl, though,
  650. if you really want to do that.
  651.  
  652. =item Can't undef active subroutine
  653.  
  654. (F) You can't undefine a routine that's currently running.  You can,
  655. however, redefine it while it's running, and you can even undef the
  656. redefined subroutine while the old routine is running.  Go figure.
  657.  
  658. =item Can't unshift
  659.  
  660. (F) You tried to unshift an "unreal" array that can't be unshifted, such
  661. as the main Perl stack.
  662.  
  663. =item Can't upgrade that kind of scalar
  664.  
  665. (P) The internal sv_upgrade routine adds "members" to an SV, making
  666. it into a more specialized kind of SV.  The top several SV types are
  667. so specialized, however, that they cannot be interconverted.  This
  668. message indicates that such a conversion was attempted.
  669.  
  670. =item Can't upgrade to undef
  671.  
  672. (P) The undefined SV is the bottom of the totem pole, in the scheme
  673. of upgradability.  Upgrading to undef indicates an error in the
  674. code calling sv_upgrade.
  675.  
  676. =item Can't use "my %s" in sort comparison
  677.  
  678. (F) The global variables $a and $b are reserved for sort comparisons.
  679. You mentioned $a or $b in the same line as the <=> or cmp operator,
  680. and the variable had earlier been declared as a lexical variable.
  681. Either qualify the sort variable with the package name, or rename the
  682. lexical variable.
  683.  
  684. =item Can't use %s for loop variable
  685.  
  686. (F) Only a simple scalar variable may be used as a loop variable on a foreach.
  687.  
  688. =item Can't use %s ref as %s ref
  689.  
  690. (F) You've mixed up your reference types.  You have to dereference a
  691. reference of the type needed.  You can use the ref() function to
  692. test the type of the reference, if need be.
  693.  
  694. =item Can't use \1 to mean $1 in expression
  695.  
  696. (W) In an ordinary expression, backslash is a unary operator that creates
  697. a reference to its argument.  The use of backslash to indicate a backreference
  698. to a matched substring is only valid as part of a regular expression pattern.
  699. Trying to do this in ordinary Perl code produces a value that prints
  700. out looking like SCALAR(0xdecaf).  Use the $1 form instead.
  701.  
  702. =item Can't use string ("%s") as %s ref while "strict refs" in use
  703.  
  704. (F) Only hard references are allowed by "strict refs".  Symbolic references
  705. are disallowed.  See L<perlref>.
  706.  
  707. =item Can't use an undefined value as %s reference
  708.  
  709. (F) A value used as either a hard reference or a symbolic reference must
  710. be a defined value.  This helps to de-lurk some insidious errors.
  711.  
  712. =item Can't use delimiter brackets within expression
  713.  
  714. (F) The ${name} construct is for disambiguating identifiers in strings, not
  715. in ordinary code.
  716.  
  717. =item Can't use global %s in "my"
  718.  
  719. (F) You tried to declare a magical variable as a lexical variable.  This is
  720. not allowed, because the magic can only be tied to one location (namely
  721. the global variable) and it would be incredibly confusing to have
  722. variables in your program that looked like magical variables but
  723. weren't.
  724.  
  725. =item Can't use subscript on %s
  726.  
  727. (F) The compiler tried to interpret a bracketed expression as a
  728. subscript.  But to the left of the brackets was an expression that
  729. didn't look like an array reference, or anything else subscriptable.
  730.  
  731. =item Can't write to temp file for B<-e>: %s
  732.  
  733. (F) The write routine failed for some reason while trying to process
  734. a B<-e> switch.  Maybe your /tmp partition is full, or clobbered.
  735.  
  736. =item Can't x= to readonly value
  737.  
  738. (F) You tried to repeat a constant value (often the undefined value) with
  739. an assignment operator, which implies modifying the value itself.
  740. Perhaps you need to copy the value to a temporary, and repeat that.
  741.  
  742. =item Cannot open temporary file
  743.  
  744. (F) The create routine failed for some reaon while trying to process
  745. a B<-e> switch.  Maybe your /tmp partition is full, or clobbered.
  746.  
  747. =item chmod: mode argument is missing initial 0
  748.  
  749. (W) A novice will sometimes say
  750.  
  751.     chmod 777, $filename
  752.  
  753. not realizing that 777 will be interpreted as a decimal number, equivalent
  754. to 01411.  Octal constants are introduced with a leading 0 in Perl, as in C.
  755.  
  756. =item Close on unopened file <%s>
  757.  
  758. (W) You tried to close a filehandle that was never opened.
  759.  
  760. =item connect() on closed fd
  761.  
  762. (W) You tried to do a connect on a closed socket.  Did you forget to check
  763. the return value of your socket() call?  See L<perlfunc/connect>.
  764.  
  765. =item Corrupt malloc ptr 0x%lx at 0x%lx
  766.  
  767. (P) The malloc package that comes with Perl had an internal failure.
  768.  
  769. =item corrupted regexp pointers
  770.  
  771. (P) The regular expression engine got confused by what the regular
  772. expression compiler gave it.
  773.  
  774. =item corrupted regexp program
  775.  
  776. (P) The regular expression engine got passed a regexp program without
  777. a valid magic number.
  778.  
  779. =item Deep recursion on subroutine "%s"
  780.  
  781. (W) This subroutine has called itself (directly or indirectly) 100
  782. times than it has returned.  This probably indicates an infinite
  783. recursion, unless you're writing strange benchmark programs, in which
  784. case it indicates something else.
  785.  
  786. =item Did you mean &%s instead?
  787.  
  788. (W) You probably referred to an imported subroutine &FOO as $FOO or some such.
  789.  
  790. =item Did you mean $ or @ instead of %?
  791.  
  792. (W) You probably said %hash{$key} when you meant $hash{$key} or @hash{@keys}.
  793. On the other hand, maybe you just meant %hash and got carried away.
  794.  
  795. =item Do you need to predeclare %s?
  796.  
  797. (S) This is an educated guess made in conjunction with the message "%s
  798. found where operator expected".  It often means a subroutine or module
  799. name is being referenced that hasn't been declared yet.  This may be
  800. because of ordering problems in your file, or because of a missing
  801. "sub", "package", "require", or "use" statement.  If you're
  802. referencing something that isn't defined yet, you don't actually have
  803. to define the subroutine or package before the current location.  You
  804. can use an empty "sub foo;" or "package FOO;" to enter a "forward"
  805. declaration.
  806.  
  807. =item Don't know how to handle magic of type '%s'
  808.  
  809. (P) The internal handling of magical variables has been cursed.
  810.  
  811. =item do_study: out of memory
  812.  
  813. (P) This should have been caught by safemalloc() instead.
  814.  
  815. =item Duplicate free() ignored
  816.  
  817. (S) An internal routine called free() on something that had already
  818. been freed.
  819.  
  820. =item elseif should be elsif
  821.  
  822. (S) There is no keyword "elseif" in Perl because Larry thinks it's
  823. ugly.  Your code will be interpreted as an attempt to call a method
  824. named "elseif" for the class returned by the following block.  This is
  825. unlikely to be what you want.
  826.  
  827. =item END failed--cleanup aborted
  828.  
  829. (F) An untrapped exception was raised while executing an END subroutine.
  830. The interpreter is immediately exited.
  831.  
  832. =item Error converting file specification %s
  833.  
  834. (F) An error peculiar to VMS.  Since Perl may have to deal with file
  835. specifications in either VMS or Unix syntax, it converts them to a
  836. single form when it must operate on them directly.  Either you've
  837. passed an invalid file specification to Perl, or you've found a
  838. case the conversion routines don't handle.  Drat.
  839.  
  840. =item Execution of %s aborted due to compilation errors.
  841.  
  842. (F) The final summary message when a Perl compilation fails.
  843.  
  844. =item Exiting eval via %s
  845.  
  846. (W) You are exiting an eval by unconventional means, such as a
  847. a goto, or a loop control statement.
  848.  
  849. =item Exiting subroutine via %s
  850.  
  851. (W) You are exiting a subroutine by unconventional means, such as a
  852. a goto, or a loop control statement.
  853.  
  854. =item Exiting substitution via %s
  855.  
  856. (W) You are exiting a substitution by unconventional means, such as a
  857. a return, a goto, or a loop control statement.
  858.  
  859. =item Fatal VMS error at %s, line %d
  860.  
  861. (P) An error peculiar to VMS.  Something untoward happened in a VMS system
  862. service or RTL routine; Perl's exit status should provide more details.  The
  863. filename in "at %s" and the line number in "line %d" tell you which section of
  864. the Perl source code is distressed.
  865.  
  866. =item fcntl is not implemented
  867.  
  868. (F) Your machine apparently doesn't implement fcntl().  What is this, a
  869. PDP-11 or something?
  870.  
  871. =item Filehandle %s never opened
  872.  
  873. (W) An I/O operation was attempted on a filehandle that was never initialized.
  874. You need to do an open() or a socket() call, or call a constructor from
  875. the FileHandle package.
  876.  
  877. =item Filehandle %s opened only for input
  878.  
  879. (W) You tried to write on a read-only filehandle.  If you
  880. intended it to be a read-write filehandle, you needed to open it with
  881. "+<" or "+>" or "+>>" instead of with "<" or nothing.  If you only
  882. intended to write the file, use ">" or ">>".  See L<perlfunc/open>.
  883.  
  884. =item Filehandle only opened for input
  885.  
  886. (W) You tried to write on a read-only filehandle.  If you
  887. intended it to be a read-write filehandle, you needed to open it with
  888. "+<" or "+>" or "+>>" instead of with "<" or nothing.  If you only
  889. intended to write the file, use ">" or ">>".  See L<perlfunc/open>.
  890.  
  891. =item Final $ should be \$ or $name
  892.  
  893. (F) You must now decide whether the final $ in a string was meant to be
  894. a literal dollar sign, or was meant to introduce a variable name
  895. that happens to be missing.  So you have to put either the backslash or
  896. the name.
  897.  
  898. =item Final @ should be \@ or @name
  899.  
  900. (F) You must now decide whether the final @ in a string was meant to be
  901. a literal "at" sign, or was meant to introduce a variable name
  902. that happens to be missing.  So you have to put either the backslash or
  903. the name.
  904.  
  905. =item Format %s redefined
  906.  
  907. (W) You redefined a format.  To suppress this warning, say
  908.  
  909.     {
  910.     local $^W = 0;
  911.     eval "format NAME =...";
  912.     }
  913.  
  914. =item Format not terminated
  915.  
  916. (F) A format must be terminated by a line with a solitary dot.  Perl got
  917. to the end of your file without finding such a line.
  918.  
  919. =item Found = in conditional, should be ==
  920.  
  921. (W) You said
  922.  
  923.     if ($foo = 123)
  924.  
  925. when you meant
  926.  
  927.     if ($foo == 123)
  928.  
  929. (or something like that).
  930.  
  931. =item gdbm store returned %d, errno %d, key "%s"
  932.  
  933. (S) A warning from the GDBM_File extension that a store failed.
  934.  
  935. =item gethostent not implemented
  936.  
  937. (F) Your C library apparently doesn't implement gethostent(), probably
  938. because if it did, it'd feel morally obligated to return every hostname
  939. on the Internet.
  940.  
  941. =item get{sock,peer}name() on closed fd
  942.  
  943. (W) You tried to get a socket or peer socket name on a closed socket.
  944. Did you forget to check the return value of your socket() call?
  945.  
  946. =item getpwnam returned invalid UIC %#o for user "%s"
  947.  
  948. (S) A warning peculiar to VMS.  The call to C<sys$getuai> underlying the
  949. C<getpwnam> operator returned an invalid UIC.
  950.  
  951.  
  952. =item Glob not terminated
  953.  
  954. (F) The lexer saw a left angle bracket in a place where it was expecting
  955. a term, so it's looking for the corresponding right angle bracket, and not
  956. finding it.  Chances are you left some needed parentheses out earlier in
  957. the line, and you really meant a "less than".
  958.  
  959. =item Global symbol "%s" requires explicit package name
  960.  
  961. (F) You've said "use strict vars", which indicates that all variables must
  962. either be lexically scoped (using "my"), or explicitly qualified to
  963. say which package the global variable is in (using "::").
  964.  
  965. =item goto must have label
  966.  
  967. (F) Unlike with "next" or "last", you're not allowed to goto an
  968. unspecified destination.  See L<perlfunc/goto>.
  969.  
  970. =item Had to create %s unexpectedly
  971.  
  972. (S) A routine asked for a symbol from a symbol table that ought to have
  973. existed already, but for some reason it didn't, and had to be created on
  974. an emergency basis to prevent a core dump.
  975.  
  976. =item Hash %%s missing the % in argument %d of %s()
  977.  
  978. (D) Really old Perl let you omit the % on hash names in some spots.  This
  979. is now heavily deprecated.
  980.  
  981. =item Identifier "%s::%s" used only once: possible typo
  982.  
  983. (W) Typographical errors often show up as unique identifiers.  If you
  984. had a good reason for having a unique identifier, then just mention it
  985. again somehow to suppress the message.
  986.  
  987. =item Illegal division by zero
  988.  
  989. (F) You tried to divide a number by 0.  Either something was wrong in your
  990. logic, or you need to put a conditional in to guard against meaningless input.
  991.  
  992. =item Illegal modulus zero
  993.  
  994. (F) You tried to divide a number by 0 to get the remainder.  Most numbers
  995. don't take to this kindly.
  996.  
  997. =item Illegal octal digit
  998.  
  999. (F) You used an 8 or 9 in a octal number.
  1000.  
  1001. =item Illegal octal digit ignored
  1002.  
  1003. (W) You may have tried to use an 8 or 9 in a octal number.  Interpretation
  1004. of the octal number stopped before the 8 or 9.
  1005.  
  1006. =item Insecure dependency in %s
  1007.  
  1008. (F) You tried to do something that the tainting mechanism didn't like. 
  1009. The tainting mechanism is turned on when you're running setuid or setgid,
  1010. or when you specify B<-T> to turn it on explicitly.  The tainting mechanism
  1011. labels all data that's derived directly or indirectly from the user,
  1012. who is considered to be unworthy of your trust.  If any such data is
  1013. used in a "dangerous" operation, you get this error.  See L<perlsec>
  1014. for more information.
  1015.  
  1016. =item Insecure directory in %s
  1017.  
  1018. (F) You can't use system(), exec(), or a piped open in a setuid or setgid
  1019. script if $ENV{PATH} contains a directory that is writable by the world.
  1020. See L<perlsec>.
  1021.  
  1022. =item Insecure PATH
  1023.  
  1024. (F) You can't use system(), exec(), or a piped open in a setuid or
  1025. setgid script if $ENV{PATH} is derived from data supplied (or
  1026. potentially supplied) by the user.  The script must set the path to a
  1027. known value, using trustworthy data.  See L<perlsec>.
  1028.  
  1029. =item Internal inconsistency in tracking vforks
  1030.  
  1031. (S) A warning peculiar to VMS.  Perl keeps track of the number
  1032. of times you've called C<fork> and C<exec>, in order to determine
  1033. whether the current call to C<exec> should be affect the current
  1034. script or a subprocess (see L<perlvms/exec>).  Somehow, this count
  1035. has become scrambled, so Perl is making a guess and treating
  1036. this C<exec> as a request to terminate the Perl script
  1037. and execute the specified command.
  1038.  
  1039. =item internal disaster in regexp
  1040.  
  1041. (P) Something went badly wrong in the regular expression parser.
  1042.  
  1043. =item internal urp in regexp at /%s/
  1044.  
  1045. (P) Something went badly awry in the regular expression parser.
  1046.  
  1047. =item invalid [] range in regexp
  1048.  
  1049. (F) The range specified in a character class had a minimum character
  1050. greater than the maximum character.  See L<perlre>.
  1051.  
  1052. =item ioctl is not implemented
  1053.  
  1054. (F) Your machine apparently doesn't implement ioctl(), which is pretty
  1055. strange for a machine that supports C.
  1056.  
  1057. =item junk on end of regexp
  1058.  
  1059. (P) The regular expression parser is confused.
  1060.  
  1061. =item Label not found for "last %s"
  1062.  
  1063. (F) You named a loop to break out of, but you're not currently in a
  1064. loop of that name, not even if you count where you were called from.
  1065. See L<perlfunc/last>.
  1066.  
  1067. =item Label not found for "next %s"
  1068.  
  1069. (F) You named a loop to continue, but you're not currently in a loop of
  1070. that name, not even if you count where you were called from.  See
  1071. L<perlfunc/last>.
  1072.  
  1073. =item Label not found for "redo %s"
  1074.  
  1075. (F) You named a loop to restart, but you're not currently in a loop of
  1076. that name, not even if you count where you were called from.  See
  1077. L<perlfunc/last>.
  1078.  
  1079. =item listen() on closed fd
  1080.  
  1081. (W) You tried to do a listen on a closed socket.  Did you forget to check
  1082. the return value of your socket() call?  See L<perlfunc/listen>.
  1083.  
  1084. =item Literal @%s now requires backslash
  1085.  
  1086. (F) It used to be that Perl would try to guess whether you wanted an
  1087. array interpolated or a literal @.  It did this when the string was
  1088. first used at runtime.  Now strings are parsed at compile time, and
  1089. ambiguous instances of @ must be disambiguated, either by putting a
  1090. backslash to indicate a literal, or by declaring (or using) the array
  1091. within the program before the string (lexically).  (Someday it will simply
  1092. assume that an unbackslashed @ interpolates an array.)
  1093.  
  1094. =item Method for operation %s not found in package %s during blessing
  1095.  
  1096. (F) An attempt was made to specify an entry in an overloading table that
  1097. doesn't somehow point to a valid method.  See L<perlovl>.
  1098.  
  1099. =item Might be a runaway multi-line %s string starting on line %d
  1100.  
  1101. (S) An advisory indicating that the previous error may have been caused
  1102. by a missing delimiter on a string or pattern, because it eventually
  1103. ended earlier on the current line.
  1104.  
  1105. =item Misplaced _ in number
  1106.  
  1107. (W) An underline in a decimal constant wasn't on a 3-digit boundary.
  1108.  
  1109. =item Missing $ on loop variable
  1110.  
  1111. (F) Apparently you've been programming in csh too much.  Variables are always
  1112. mentioned with the $ in Perl, unlike in the shells, where it can vary from 
  1113. one line to the next.
  1114.  
  1115. =item Missing comma after first argument to %s function
  1116.  
  1117. (F) While certain functions allow you to specify a filehandle or an
  1118. "indirect object" before the argument list, this ain't one of them.
  1119.  
  1120. =item Missing operator before %s?
  1121.  
  1122. (S) This is an educated guess made in conjunction with the message "%s
  1123. found where operator expected".  Often the missing operator is a comma.
  1124.  
  1125. =item Missing right bracket
  1126.  
  1127. (F) The lexer counted more opening curly brackets (braces) than closing ones.
  1128. As a general rule, you'll find it's missing near the place you were last
  1129. editing.
  1130.  
  1131. =item Missing semicolon on previous line?
  1132.  
  1133. (S) This is an educated guess made in conjunction with the message "%s
  1134. found where operator expected".  Don't automatically put a semicolon on
  1135. the previous line just because you saw this message.
  1136.  
  1137. =item Modification of a read-only value attempted
  1138.  
  1139. (F) You tried, directly or indirectly, to change the value of a
  1140. constant.  You didn't, of course, try "2 = 1", since the compiler
  1141. catches that.  But an easy way to do the same thing is:
  1142.  
  1143.     sub mod { $_[0] = 1 }
  1144.     mod(2);
  1145.  
  1146. Another way is to assign to a substr() that's off the end of the string.
  1147.  
  1148. =item Modification of non-creatable array value attempted, subscript %d
  1149.  
  1150. (F) You tried to make an array value spring into existence, and the
  1151. subscript was probably negative, even counting from end of the array
  1152. backwards.
  1153.  
  1154. =item Modification of non-creatable hash value attempted, subscript "%s"
  1155.  
  1156. (F) You tried to make a hash value spring into existence, and it couldn't
  1157. be created for some peculiar reason.
  1158.  
  1159. =item Module name must be constant
  1160.  
  1161. (F) Only a bare module name is allowed as the first argument to a "use".
  1162.  
  1163. =item msg%s not implemented
  1164.  
  1165. (F) You don't have System V message IPC on your system.
  1166.  
  1167. =item Multidimensional syntax %s not supported
  1168.  
  1169. (W) Multidimensional arrays aren't written like $foo[1,2,3].  They're written
  1170. like $foo[1][2][3], as in C.
  1171.  
  1172. =item Negative length
  1173.  
  1174. (F) You tried to do a read/write/send/recv operation with a buffer length
  1175. that is less than 0.  This is difficult to imagine.
  1176.  
  1177. =item nested *?+ in regexp
  1178.  
  1179. (F) You can't quantify a quantifier without intervening parens.  So
  1180. things like ** or +* or ?* are illegal.
  1181.  
  1182. Note, however, that the minimal matching quantifiers, *?, +? and ?? appear
  1183. to be nested quantifiers, but aren't.  See L<perlre>.
  1184.  
  1185. =item No #! line
  1186.  
  1187. (F) The setuid emulator requires that scripts have a well-formed #! line
  1188. even on machines that don't support the #! construct.
  1189.  
  1190. =item No %s allowed while running setuid
  1191.  
  1192. (F) Certain operations are deemed to be too insecure for a setuid or setgid
  1193. script to even be allowed to attempt.  Generally speaking there will be
  1194. another way to do what you want that is, if not secure, at least securable.
  1195. See L<perlsec>.
  1196.  
  1197. =item No B<-e> allowed in setuid scripts
  1198.  
  1199. (F) A setuid script can't be specified by the user.
  1200.  
  1201. =item No comma allowed after %s
  1202.  
  1203. (F) A list operator that has a filehandle or "indirect object" is not
  1204. allowed to have a comma between that and the following arguments.
  1205. Otherwise it'd be just another one of the arguments.
  1206.  
  1207. =item No command into which to pipe on command line
  1208.  
  1209. (F) An error peculiar to VMS.  Perl handles its own command line redirection,
  1210. and found a '|' at the end of the command line, so it doesn't know whither you
  1211. want to pipe the output from this command.
  1212.  
  1213. =item No DB::DB routine defined
  1214.  
  1215. (F) The currently executing code was compiled with the B<-d> switch,
  1216. but for some reason the perl5db.pl file (or some facsimile thereof)
  1217. didn't define a routine to be called at the beginning of each
  1218. statement.  Which is odd, because the file should have been required
  1219. automatically, and should have blown up the require if it didn't parse
  1220. right.
  1221.  
  1222. =item No dbm on this machine
  1223.  
  1224. (P) This is counted as an internal error, because every machine should
  1225. supply dbm nowadays, since Perl comes with SDBM.  See L<SDBM_File>.
  1226.  
  1227. =item No DBsub routine
  1228.  
  1229. (F) The currently executing code was compiled with the B<-d> switch,
  1230. but for some reason the perl5db.pl file (or some facsimile thereof)
  1231. didn't define a DB::sub routine to be called at the beginning of each
  1232. ordinary subroutine call.
  1233.  
  1234. =item No error file after 2> or 2>> on command line
  1235.  
  1236. (F) An error peculiar to VMS.  Perl handles its own command line redirection,
  1237. and found a '2>' or a '2>>' on the command line, but can't find the name of the
  1238. file to which to write data destined for stderr.
  1239.  
  1240. =item No input file after < on command line
  1241.  
  1242. (F) An error peculiar to VMS.  Perl handles its own command line redirection,
  1243. and found a '<' on the command line, but can't find the name of the file from
  1244. which to read data for stdin.
  1245.  
  1246. =item No output file after > on command line
  1247.  
  1248. (F) An error peculiar to VMS.  Perl handles its own command line redirection,
  1249. and found a lone '>' at the end of the command line, so it doesn't know whither
  1250. you wanted to redirect stdout.
  1251.  
  1252. =item No output file after > or >> on command line
  1253.  
  1254. (F) An error peculiar to VMS.  Perl handles its own command line redirection,
  1255. and found a '>' or a '>>' on the command line, but can't find the name of the
  1256. file to which to write data destined for stdout.
  1257.  
  1258. =item No Perl script found in input
  1259.  
  1260. (F) You called C<perl -x>, but no line was found in the file beginning
  1261. with #! and containing the word "perl".
  1262.  
  1263. =item No setregid available
  1264.  
  1265. (F) Configure didn't find anything resembling the setregid() call for
  1266. your system.
  1267.  
  1268. =item No setreuid available
  1269.  
  1270. (F) Configure didn't find anything resembling the setreuid() call for
  1271. your system.
  1272.  
  1273. =item No space allowed after B<-I>
  1274.  
  1275. (F) The argument to B<-I> must follow the B<-I> immediately with no
  1276. intervening space.
  1277.  
  1278. =item No such pipe open
  1279.  
  1280. (P) An error peculiar to VMS.  The internal routine my_pclose() tried to
  1281. close a pipe which hadn't been opened.  This should have been caught earlier as
  1282. an attempt to close an unopened filehandle.
  1283.  
  1284. =item No such signal: SIG%s
  1285.  
  1286. (W) You specified a signal name as a subscript to %SIG that was not recognized.
  1287. Say C<kill -l> in your shell to see the valid signal names on your system.
  1288.  
  1289. =item Not a CODE reference
  1290.  
  1291. (F) Perl was trying to evaluate a reference to a code value (that is, a
  1292. subroutine), but found a reference to something else instead.  You can
  1293. use the ref() function to find out what kind of ref it really was.
  1294. See also L<perlref>.
  1295.  
  1296. =item Not a format reference
  1297.  
  1298. (F) I'm not sure how you managed to generate a reference to an anonymous
  1299. format, but this indicates you did, and that it didn't exist.
  1300.  
  1301. =item Not a GLOB reference
  1302.  
  1303. (F) Perl was trying to evaluate a reference to a "type glob" (that is,
  1304. a symbol table entry that looks like C<*foo>), but found a reference to
  1305. something else instead.  You can use the ref() function to find out
  1306. what kind of ref it really was.  See L<perlref>.
  1307.  
  1308. =item Not a HASH reference
  1309.  
  1310. (F) Perl was trying to evaluate a reference to a hash value, but
  1311. found a reference to something else instead.  You can use the ref()
  1312. function to find out what kind of ref it really was.  See L<perlref>.
  1313.  
  1314. =item Not a perl script
  1315.  
  1316. (F) The setuid emulator requires that scripts have a well-formed #! line
  1317. even on machines that don't support the #! construct.  The line must
  1318. mention perl.
  1319.  
  1320. =item Not a SCALAR reference
  1321.  
  1322. (F) Perl was trying to evaluate a reference to a scalar value, but
  1323. found a reference to something else instead.  You can use the ref()
  1324. function to find out what kind of ref it really was.  See L<perlref>.
  1325.  
  1326. =item Not a subroutine reference
  1327.  
  1328. (F) Perl was trying to evaluate a reference to a code value (that is, a
  1329. subroutine), but found a reference to something else instead.  You can
  1330. use the ref() function to find out what kind of ref it really was.
  1331. See also L<perlref>.
  1332.  
  1333. =item Not a subroutine reference in %OVERLOAD
  1334.  
  1335. (F) An attempt was made to specify an entry in an overloading table that
  1336. doesn't somehow point to a valid subroutine.  See L<perlovl>.
  1337.  
  1338. =item Not an ARRAY reference
  1339.  
  1340. (F) Perl was trying to evaluate a reference to an array value, but
  1341. found a reference to something else instead.  You can use the ref()
  1342. function to find out what kind of ref it really was.  See L<perlref>.
  1343.  
  1344. =item Not enough arguments for %s
  1345.  
  1346. (F) The function requires more arguments than you specified.
  1347.  
  1348. =item Not enough format arguments
  1349.  
  1350. (W) A format specified more picture fields than the next line supplied.
  1351. See L<perlform>.
  1352.  
  1353. =item Null filename used
  1354.  
  1355. (F) You can't require the null filename, especially since on many machines
  1356. that means the current directory!  See L<perlfunc/require>.
  1357.  
  1358. =item NULL OP IN RUN
  1359.  
  1360. (P) Some internal routine called run() with a null opcode pointer.
  1361.  
  1362. =item Null realloc
  1363.  
  1364. (P) An attempt was made to realloc NULL.
  1365.  
  1366. =item NULL regexp argument
  1367.  
  1368. (P) The internal pattern matching routines blew it bigtime.
  1369.  
  1370. =item NULL regexp parameter
  1371.  
  1372. (P) The internal pattern matching routines are out of their gourd.
  1373.  
  1374. =item Odd number of elements in hash list
  1375.  
  1376. (S) You specified an odd number of elements to a hash list, which is odd,
  1377. since hash lists come in key/value pairs.
  1378.  
  1379. =item oops: oopsAV
  1380.  
  1381. (S) An internal warning that the grammar is screwed up.
  1382.  
  1383. =item oops: oopsHV
  1384.  
  1385. (S) An internal warning that the grammar is screwed up.
  1386.  
  1387. =item Operation `%s' %s: no method found,
  1388.  
  1389. (F) An attempt was made to use an entry in an overloading table that
  1390. somehow no longer points to a valid method.  See L<perlovl>.
  1391.  
  1392. =item Operator or semicolon missing before %s
  1393.  
  1394. (S) You used a variable or subroutine call where the parser was
  1395. expecting an operator.  The parser has assumed you really meant
  1396. to use an operator, but this is highly likely to be incorrect.
  1397. For example, if you say "*foo *foo" it will be interpreted as
  1398. if you said "*foo * 'foo'".
  1399.  
  1400. =item Out of memory for yacc stack
  1401.  
  1402. (F) The yacc parser wanted to grow its stack so it could continue parsing,
  1403. but realloc() wouldn't give it more memory, virtual or otherwise.
  1404.  
  1405. =item Out of memory!
  1406.  
  1407. (X) The malloc() function returned 0, indicating there was insufficient
  1408. remaining memory (or virtual memory) to satisfy the request.
  1409.  
  1410. =item page overflow
  1411.  
  1412. (W) A single call to write() produced more lines than can fit on a page.
  1413. See L<perlform>.
  1414.  
  1415. =item panic: ck_grep
  1416.  
  1417. (P) Failed an internal consistency check trying to compile a grep.
  1418.  
  1419. =item panic: ck_split
  1420.  
  1421. (P) Failed an internal consistency check trying to compile a split.
  1422.  
  1423. =item panic: corrupt saved stack index
  1424.  
  1425. (P) The savestack was requested to restore more localized values than there
  1426. are in the savestack.
  1427.  
  1428. =item panic: die %s
  1429.  
  1430. (P) We popped the context stack to an eval context, and then discovered
  1431. it wasn't an eval context.
  1432.  
  1433. =item panic: do_match
  1434.  
  1435. (P) The internal pp_match() routine was called with invalid operational data.
  1436.  
  1437. =item panic: do_split
  1438.  
  1439. (P) Something terrible went wrong in setting up for the split.
  1440.  
  1441. =item panic: do_subst
  1442.  
  1443. (P) The internal pp_subst() routine was called with invalid operational data.
  1444.  
  1445. =item panic: do_trans
  1446.  
  1447. (P) The internal do_trans() routine was called with invalid operational data.
  1448.  
  1449. =item panic: goto
  1450.  
  1451. (P) We popped the context stack to a context with the specified label,
  1452. and then discovered it wasn't a context we know how to do a goto in.
  1453.  
  1454. =item panic: INTERPCASEMOD
  1455.  
  1456. (P) The lexer got into a bad state at a case modifier.
  1457.  
  1458. =item panic: INTERPCONCAT
  1459.  
  1460. (P) The lexer got into a bad state parsing a string with brackets.
  1461.  
  1462. =item panic: last
  1463.  
  1464. (P) We popped the context stack to a block context, and then discovered
  1465. it wasn't a block context.
  1466.  
  1467. =item panic: leave_scope clearsv
  1468.  
  1469. (P) A writable lexical variable became readonly somehow within the scope.
  1470.  
  1471. =item panic: leave_scope inconsistency
  1472.  
  1473. (P) The savestack probably got out of sync.  At least, there was an
  1474. invalid enum on the top of it.
  1475.  
  1476. =item panic: malloc
  1477.  
  1478. (P) Something requested a negative number of bytes of malloc.
  1479.  
  1480. =item panic: mapstart
  1481.  
  1482. (P) The compiler is screwed up with respect to the map() function.
  1483.  
  1484. =item panic: null array
  1485.  
  1486. (P) One of the internal array routines was passed a null AV pointer.
  1487.  
  1488. =item panic: pad_alloc
  1489.  
  1490. (P) The compiler got confused about which scratch pad it was allocating
  1491. and freeing temporaries and lexicals from.
  1492.  
  1493. =item panic: pad_free curpad
  1494.  
  1495. (P) The compiler got confused about which scratch pad it was allocating
  1496. and freeing temporaries and lexicals from.
  1497.  
  1498. =item panic: pad_free po
  1499.  
  1500. (P) An invalid scratch pad offset was detected internally.
  1501.  
  1502. =item panic: pad_reset curpad
  1503.  
  1504. (P) The compiler got confused about which scratch pad it was allocating
  1505. and freeing temporaries and lexicals from.
  1506.  
  1507. =item panic: pad_sv po
  1508.  
  1509. (P) An invalid scratch pad offset was detected internally.
  1510.  
  1511. =item panic: pad_swipe curpad
  1512.  
  1513. (P) The compiler got confused about which scratch pad it was allocating
  1514. and freeing temporaries and lexicals from.
  1515.  
  1516. =item panic: pad_swipe po
  1517.  
  1518. (P) An invalid scratch pad offset was detected internally.
  1519.  
  1520. =item panic: pp_iter
  1521.  
  1522. (P) The foreach iterator got called in a non-loop context frame.
  1523.  
  1524. =item panic: realloc
  1525.  
  1526. (P) Something requested a negative number of bytes of realloc.
  1527.  
  1528. =item panic: restartop
  1529.  
  1530. (P) Some internal routine requested a goto (or something like it), and
  1531. didn't supply the destination.
  1532.  
  1533. =item panic: return
  1534.  
  1535. (P) We popped the context stack to a subroutine or eval context, and
  1536. then discovered it wasn't a subroutine or eval context.
  1537.  
  1538. =item panic: scan_num
  1539.  
  1540. (P) scan_num() got called on something that wasn't a number.
  1541.  
  1542. =item panic: sv_insert
  1543.  
  1544. (P) The sv_insert() routine was told to remove more string than there
  1545. was string.
  1546.  
  1547. =item panic: top_env
  1548.  
  1549. (P) The compiler attempted to do a goto, or something weird like that.
  1550.  
  1551. =item panic: yylex
  1552.  
  1553. (P) The lexer got into a bad state while processing a case modifier.
  1554.  
  1555. =item Parens missing around "%s" list
  1556.  
  1557. (W) You said something like
  1558.  
  1559.     my $foo, $bar = @_;
  1560.  
  1561. when you meant
  1562.  
  1563.     my ($foo, $bar) = @_;
  1564.  
  1565. Remember that "my" and "local" bind closer than comma.
  1566.  
  1567. =item Perl %3.3f required--this is only version %s, stopped
  1568.  
  1569. (F) The module in question uses features of a version of Perl more recent
  1570. than the currently running version.  How long has it been since you upgraded,
  1571. anyway?  See L<perlfunc/require>.
  1572.  
  1573. =item Permission denied
  1574.  
  1575. (F) The setuid emulator in suidperl decided you were up to no good.
  1576.  
  1577. =item pid %d not a child
  1578.  
  1579. (W) A warning peculiar to VMS.  Waitpid() was asked to wait for a process which
  1580. isn't a subprocess of the current process.  While this is fine from VMS'
  1581. perspective, it's probably not what you intended.
  1582.  
  1583. =item POSIX getpgrp can't take an argument
  1584.  
  1585. (F) Your C compiler uses POSIX getpgrp(), which takes no argument, unlike
  1586. the BSD version, which takes a pid.
  1587.  
  1588. =item Possible memory corruption: %s overflowed 3rd argument
  1589.  
  1590. (F) An ioctl() or fcntl() returned more than Perl was bargaining for.
  1591. Perl guesses a reasonable buffer size, but puts a sentinel byte at the
  1592. end of the buffer just in case.  This sentinel byte got clobbered, and
  1593. Perl assumes that memory is now corrupted.  See L<perlfunc/ioctl>.
  1594.  
  1595. =item Precedence problem: open %s should be open(%s)
  1596.  
  1597. (S) The old irregular construct
  1598.  
  1599.     open FOO || die;
  1600.  
  1601. is now misinterpreted as
  1602.  
  1603.     open(FOO || die);
  1604.  
  1605. because of the strict regularization of Perl 5's grammar into unary and
  1606. list operators.  (The old open was a little of both.) You must put
  1607. parens around the filehandle, or use the new "or" operator instead of "||".
  1608.  
  1609. =item print on closed filehandle %s
  1610.  
  1611. (W) The filehandle you're printing on got itself closed sometime before now.
  1612. Check your logic flow.
  1613.  
  1614. =item printf on closed filehandle %s
  1615.  
  1616. (W) The filehandle you're writing to got itself closed sometime before now.
  1617. Check your logic flow.
  1618.  
  1619. =item Probable precedence problem on %s
  1620.  
  1621. (W) The compiler found a bare word where it expected a conditional,
  1622. which often indicates that an || or && was parsed as part of the
  1623. last argument of the previous construct, for example:
  1624.  
  1625.     open FOO || die;
  1626.  
  1627. =item Prototype mismatch: (%s) vs (%s)
  1628.  
  1629. (S) The subroutine being defined had a predeclared (forward) declaration
  1630. with a different function prototype.
  1631.  
  1632. =item Read on closed filehandle <%s>
  1633.  
  1634. (W) The filehandle you're reading from got itself closed sometime before now.
  1635. Check your logic flow.
  1636.  
  1637. =item Reallocation too large: %lx
  1638.  
  1639. (F) You can't allocate more than 64K on an MSDOS machine.
  1640.  
  1641. =item Recompile perl with B<-D>DEBUGGING to use B<-D> switch
  1642.  
  1643. (F) You can't use the B<-D> option unless the code to produce the
  1644. desired output is compiled into Perl, which entails some overhead,
  1645. which is why it's currently left out of your copy.
  1646.  
  1647. =item Recursive inheritance detected
  1648.  
  1649. (F) More than 100 levels of inheritance were used.  Probably indicates
  1650. an unintended loop in your inheritance hierarchy.
  1651.  
  1652. =item Reference miscount in sv_replace()
  1653.  
  1654. (W) The internal sv_replace() function was handed a new SV with a
  1655. reference count of other than 1.
  1656.  
  1657. =item regexp memory corruption
  1658.  
  1659. (P) The regular expression engine got confused by what the regular
  1660. expression compiler gave it.
  1661.  
  1662. =item regexp out of space
  1663.  
  1664. (P) A "can't happen" error, because safemalloc() should have caught it earlier.
  1665.  
  1666. =item regexp too big
  1667.  
  1668. (F) The current implementation of regular expression uses shorts as
  1669. address offsets within a string.  Unfortunately this means that if
  1670. the regular expression compiles to longer than 32767, it'll blow up.
  1671. Usually when you want a regular expression this big, there is a better
  1672. way to do it with multiple statements.  See L<perlre>.
  1673.  
  1674. =item Reversed %s= operator
  1675.  
  1676. (W) You wrote your assignment operator backwards.  The = must always
  1677. comes last, to avoid ambiguity with subsequent unary operators.
  1678.  
  1679. =item Runaway format
  1680.  
  1681. (F) Your format contained the ~~ repeat-until-blank sequence, but it
  1682. produced 200 lines at once, and the 200th line looked exactly like the
  1683. 199th line.  Apparently you didn't arrange for the arguments to exhaust
  1684. themselves, either by using ^ instead of @ (for scalar variables), or by
  1685. shifting or popping (for array variables).  See L<perlform>.
  1686.  
  1687. =item Scalar value @%s[%s] better written as $%s[%s]
  1688.  
  1689. (W) You've used an array slice (indicated by @) to select a single value of
  1690. an array.  Generally it's better to ask for a scalar value (indicated by $).
  1691. The difference is that $foo[&bar] always behaves like a scalar, both when
  1692. assigning to it and when evaluating its argument, while @foo[&bar] behaves
  1693. like a list when you assign to it, and provides a list context to its
  1694. subscript, which can do weird things if you're only expecting one subscript.
  1695.  
  1696. On the other hand, if you were actually hoping to treat the array
  1697. element as a list, you need to look into how references work, since
  1698. Perl will not magically convert between scalars and lists for you.  See
  1699. L<perlref>.
  1700.  
  1701. =item Script is not setuid/setgid in suidperl
  1702.  
  1703. (F) Oddly, the suidperl program was invoked on a script with its setuid
  1704. or setgid bit set.  This doesn't make much sense.
  1705.  
  1706. =item Search pattern not terminated
  1707.  
  1708. (F) The lexer couldn't find the final delimiter of a // or m{}
  1709. construct.  Remember that bracketing delimiters count nesting level.
  1710.  
  1711. =item seek() on unopened file
  1712.  
  1713. (W) You tried to use the seek() function on a filehandle that was either
  1714. never opened or has been closed since.
  1715.  
  1716. =item select not implemented
  1717.  
  1718. (F) This machine doesn't implement the select() system call.
  1719.  
  1720. =item sem%s not implemented
  1721.  
  1722. (F) You don't have System V semaphore IPC on your system.
  1723.  
  1724. =item semi-panic: attempt to dup freed string
  1725.  
  1726. (S) The internal newSVsv() routine was called to duplicate a scalar
  1727. that had previously been marked as free.
  1728.  
  1729. =item Semicolon seems to be missing
  1730.  
  1731. (W) A nearby syntax error was probably caused by a missing semicolon,
  1732. or possibly some other missing operator, such as a comma.
  1733.  
  1734. =item Send on closed socket
  1735.  
  1736. (W) The filehandle you're sending to got itself closed sometime before now.
  1737. Check your logic flow.
  1738.  
  1739. =item Sequence (?#... not terminated
  1740.  
  1741. (F) A regular expression comment must be terminated by a closing
  1742. parenthesis.  Embedded parens aren't allowed.  See L<perlre>.
  1743.  
  1744. =item Sequence (?%s...) not implemented
  1745.  
  1746. (F) A proposed regular expression extension has the character reserved
  1747. but has not yet been written.  See L<perlre>.
  1748.  
  1749. =item Sequence (?%s...) not recognized
  1750.  
  1751. (F) You used a regular expression extension that doesn't make sense.
  1752. See L<perlre>.
  1753.  
  1754. =item setegid() not implemented
  1755.  
  1756. (F) You tried to assign to $), and your operating system doesn't support
  1757. the setegid() system call (or equivalent), or at least Configure didn't
  1758. think so.
  1759.  
  1760. =item seteuid() not implemented
  1761.  
  1762. (F) You tried to assign to $>, and your operating system doesn't support
  1763. the seteuid() system call (or equivalent), or at least Configure didn't
  1764. think so.
  1765.  
  1766. =item setrgid() not implemented
  1767.  
  1768. (F) You tried to assign to $(, and your operating system doesn't support
  1769. the setrgid() system call (or equivalent), or at least Configure didn't
  1770. think so.
  1771.  
  1772. =item setruid() not implemented
  1773.  
  1774. (F) You tried to assign to $<, and your operating system doesn't support
  1775. the setruid() system call (or equivalent), or at least Configure didn't
  1776. think so.
  1777.  
  1778. =item Setuid/gid script is writable by world
  1779.  
  1780. (F) The setuid emulator won't run a script that is writable by the world,
  1781. because the world might have written on it already.
  1782.  
  1783. =item shm%s not implemented
  1784.  
  1785. (F) You don't have System V shared memory IPC on your system.
  1786.  
  1787. =item shutdown() on closed fd
  1788.  
  1789. (W) You tried to do a shutdown on a closed socket.  Seems a bit superfluous.
  1790.  
  1791. =item SIG%s handler "%s" not defined.
  1792.  
  1793. (W) The signal handler named in %SIG doesn't, in fact, exist.  Perhaps you
  1794. put it into the wrong package?
  1795.  
  1796. =item sort is now a reserved word
  1797.  
  1798. (F) An ancient error message that almost nobody ever runs into anymore.
  1799. But before sort was a keyword, people sometimes used it as a filehandle.
  1800.  
  1801. =item Sort subroutine didn't return a numeric value
  1802.  
  1803. (F) A sort comparison routine must return a number.  You probably blew
  1804. it by not using C<E<lt>=E<gt>> or C<cmp>, or by not using them correctly.
  1805. See L<perlfunc/sort>.
  1806.  
  1807. =item Sort subroutine didn't return single value
  1808.  
  1809. (F) A sort comparison subroutine may not return a list value with more
  1810. or less than one element.  See L<perlfunc/sort>.
  1811.  
  1812. =item Split loop
  1813.  
  1814. (P) The split was looping infinitely.  (Obviously, a split shouldn't iterate
  1815. more times than there are characters of input, which is what happened.)
  1816. See L<perlfunc/split>.
  1817.  
  1818. =item Stat on unopened file <%s>
  1819.  
  1820. (W) You tried to use the stat() function (or an equivalent file test)
  1821. on a filehandle that was either never opened or has been closed since.
  1822.  
  1823. =item Statement unlikely to be reached
  1824.  
  1825. (W) You did an exec() with some statement after it other than a die().
  1826. This is almost always an error, because exec() never returns unless
  1827. there was a failure.  You probably wanted to use system() instead,
  1828. which does return.  To suppress this warning, put the exec() in a block
  1829. by itself.
  1830.  
  1831. =item Subroutine %s redefined
  1832.  
  1833. (W) You redefined a subroutine.  To suppress this warning, say
  1834.  
  1835.     {
  1836.     local $^W = 0;
  1837.     eval "sub name { ... }";
  1838.     }
  1839.  
  1840. =item Substitution loop
  1841.  
  1842. (P) The substitution was looping infinitely.  (Obviously, a
  1843. substitution shouldn't iterate more times than there are characters of
  1844. input, which is what happened.) See the discussion of substitution in
  1845. L<perlop/"Quote and Quotelike Operators">.
  1846.  
  1847. =item Substitution pattern not terminated
  1848.  
  1849. (F) The lexer couldn't find the interior delimiter of a s/// or s{}{}
  1850. construct.  Remember that bracketing delimiters count nesting level.
  1851.  
  1852. =item Substitution replacement not terminated
  1853.  
  1854. (F) The lexer couldn't find the final delimiter of a s/// or s{}{}
  1855. construct.  Remember that bracketing delimiters count nesting level.
  1856.  
  1857. =item substr outside of string
  1858.  
  1859. (W) You tried to reference a substr() that pointed outside of a string.
  1860. That is, the absolute value of the offset was larger than the length of
  1861. the string.  See L<perlfunc/substr>.
  1862.  
  1863. =item suidperl is no longer needed since...
  1864.  
  1865. (F) Your Perl was compiled with B<-D>SETUID_SCRIPTS_ARE_SECURE_NOW, but a
  1866. version of the setuid emulator somehow got run anyway.
  1867.  
  1868. =item syntax error
  1869.  
  1870. (F) Probably means you had a syntax error.  Common reasons include:
  1871.  
  1872.     A keyword is misspelled.
  1873.     A semicolon is missing.
  1874.     A comma is missing.
  1875.     An opening or closing parenthesis is missing.
  1876.     An opening or closing brace is missing.
  1877.     A closing quote is missing.
  1878.  
  1879. Often there will be another error message associated with the syntax
  1880. error giving more information.  (Sometimes it helps to turn on B<-w>.)
  1881. The error message itself often tells you where it was in the line when
  1882. it decided to give up.  Sometimes the actual error is several tokens
  1883. before this, since Perl is good at understanding random input.
  1884. Occasionally the line number may be misleading, and once in a blue moon
  1885. the only way to figure out what's triggering the error is to call
  1886. C<perl -c> repeatedly, chopping away half the program each time to see
  1887. if the error went away.  Sort of the cybernetic version of S<20 questions>.
  1888.  
  1889. =item syntax error at line %d: `%s' unexpected
  1890.  
  1891. (A) You've accidentally run your script through the Bourne shell 
  1892. instead of Perl.  Check the <#!> line, or manually feed your script
  1893. into Perl yourself.
  1894.  
  1895. =item System V IPC is not implemented on this machine
  1896.  
  1897. (F) You tried to do something with a function beginning with "sem", "shm"
  1898. or "msg".  See L<perlfunc/semctl>, for example.
  1899.  
  1900. =item Syswrite on closed filehandle
  1901.  
  1902. (W) The filehandle you're writing to got itself closed sometime before now.
  1903. Check your logic flow.
  1904.  
  1905. =item tell() on unopened file
  1906.  
  1907. (W) You tried to use the tell() function on a filehandle that was either
  1908. never opened or has been closed since.
  1909.  
  1910. =item Test on unopened file <%s>
  1911.  
  1912. (W) You tried to invoke a file test operator on a filehandle that isn't
  1913. open.  Check your logic.  See also L<perlfunc/-X>.
  1914.  
  1915. =item That use of $[ is unsupported
  1916.  
  1917. (F) Assignment to $[ is now strictly circumscribed, and interpreted as
  1918. a compiler directive.  You may only say one of
  1919.  
  1920.     $[ = 0;
  1921.     $[ = 1;
  1922.     ...
  1923.     local $[ = 0;
  1924.     local $[ = 1;
  1925.     ...
  1926.  
  1927. This is to prevent the problem of one module changing the array base
  1928. out from under another module inadvertently.  See L<perlvar/$[>.
  1929.  
  1930. =item The %s function is unimplemented
  1931.  
  1932. The function indicated isn't implemented on this architecture, according
  1933. to the probings of Configure.
  1934.  
  1935. =item The crypt() function is unimplemented due to excessive paranoia.
  1936.  
  1937. (F) Configure couldn't find the crypt() function on your machine,
  1938. probably because your vendor didn't supply it, probably because they
  1939. think the U.S. Govermnment thinks it's a secret, or at least that they
  1940. will continue to pretend that it is.  And if you quote me on that, I
  1941. will deny it.
  1942.  
  1943. =item The stat preceding C<-l _> wasn't an lstat
  1944.  
  1945. (F) It makes no sense to test the current stat buffer for symbolic linkhood
  1946. if the last stat that wrote to the stat buffer already went past
  1947. the symlink to get to the real file.  Use an actual filename instead.
  1948.  
  1949. =item times not implemented
  1950.  
  1951. (F) Your version of the C library apparently doesn't do times().  I suspect
  1952. you're not running on Unix.
  1953.  
  1954. =item Too few args to syscall
  1955.  
  1956. (F) There has to be at least one argument to syscall() to specify the
  1957. system call to call, silly dilly.
  1958.  
  1959. =item Too many ('s
  1960.  
  1961. =item Too many )'s
  1962.  
  1963. (A) You've accidentally run your script through B<csh> instead
  1964. of Perl.  Check the <#!> line, or manually feed your script
  1965. into Perl yourself.
  1966.  
  1967. =item Too many args to syscall
  1968.  
  1969. (F) Perl only supports a maximum of 14 args to syscall().
  1970.  
  1971. =item Too many arguments for %s
  1972.  
  1973. (F) The function requires fewer arguments than you specified.
  1974.  
  1975. =item trailing \ in regexp
  1976.  
  1977. (F) The regular expression ends with an unbackslashed backslash.  Backslash
  1978. it.   See L<perlre>.
  1979.  
  1980. =item Translation pattern not terminated
  1981.  
  1982. (F) The lexer couldn't find the interior delimiter of a tr/// or tr[][]
  1983. construct.
  1984.  
  1985. =item Translation replacement not terminated
  1986.  
  1987. (F) The lexer couldn't find the final delimiter of a tr/// or tr[][]
  1988. construct.
  1989.  
  1990. =item truncate not implemented
  1991.  
  1992. (F) Your machine doesn't implement a file truncation mechanism that
  1993. Configure knows about.
  1994.  
  1995. =item Type of arg %d to %s must be %s (not %s)
  1996.  
  1997. (F) This function requires the argument in that position to be of a
  1998. certain type.  Arrays must be @NAME or @{EXPR}.  Hashes must be
  1999. %NAME or %{EXPR}.  No implicit dereferencing is allowed--use the
  2000. {EXPR} forms as an explicit dereference.  See L<perlref>.
  2001.  
  2002. =item umask: argument is missing initial 0
  2003.  
  2004. (W) A umask of 222 is incorrect.  It should be 0222, since octal literals
  2005. always start with 0 in Perl, as in C.
  2006.  
  2007. =item Unable to create sub named "%s"
  2008.  
  2009. (F) You attempted to create or access a subroutine with an illegal name.
  2010.  
  2011. =item Unbalanced context: %d more PUSHes than POPs
  2012.  
  2013. (W) The exit code detected an internal inconsistency in how many execution
  2014. contexts were entered and left.
  2015.  
  2016. =item Unbalanced saves: %d more saves than restores
  2017.  
  2018. (W) The exit code detected an internal inconsistency in how many
  2019. values were temporarily localized.
  2020.  
  2021. =item Unbalanced scopes: %d more ENTERs than LEAVEs
  2022.  
  2023. (W) The exit code detected an internal inconsistency in how many blocks
  2024. were entered and left.
  2025.  
  2026. =item Unbalanced tmps: %d more allocs than frees
  2027.  
  2028. (W) The exit code detected an internal inconsistency in how many mortal
  2029. scalars were allocated and freed.
  2030.  
  2031. =item Undefined format "%s" called
  2032.  
  2033. (F) The format indicated doesn't seem to exist.  Perhaps it's really in
  2034. another package?  See L<perlform>.
  2035.  
  2036. =item Undefined sort subroutine "%s" called
  2037.  
  2038. (F) The sort comparison routine specified doesn't seem to exist.  Perhaps
  2039. it's in a different package?  See L<perlfunc/sort>.
  2040.  
  2041. =item Undefined subroutine &%s called
  2042.  
  2043. (F) The subroutine indicated hasn't been defined, or if it was, it
  2044. has since been undefined.
  2045.  
  2046. =item Undefined subroutine called
  2047.  
  2048. (F) The anonymous subroutine you're trying to call hasn't been defined,
  2049. or if it was, it has since been undefined.
  2050.  
  2051. =item Undefined subroutine in sort
  2052.  
  2053. (F) The sort comparison routine specified is declared but doesn't seem to
  2054. have been defined yet.  See L<perlfunc/sort>.
  2055.  
  2056. =item Undefined top format "%s" called
  2057.  
  2058. (F) The format indicated doesn't seem to exist.  Perhaps it's really in
  2059. another package?  See L<perlform>.
  2060.  
  2061. =item unexec of %s into %s failed!
  2062.  
  2063. (F) The unexec() routine failed for some reason.  See your local FSF
  2064. representative, who probably put it there in the first place.
  2065.  
  2066. =item Unknown BYTEORDER
  2067.  
  2068. (F) There are no byteswapping functions for a machine with this byte order.
  2069.  
  2070. =item unmatched () in regexp
  2071.  
  2072. (F) Unbackslashed parentheses must always be balanced in regular
  2073. expressions.  If you're a vi user, the % key is valuable for finding
  2074. the matching paren.  See L<perlre>.
  2075.  
  2076. =item Unmatched right bracket
  2077.  
  2078. (F) The lexer counted more closing curly brackets (braces) than opening
  2079. ones, so you're probably missing an opening bracket.  As a general
  2080. rule, you'll find the missing one (so to speak) near the place you were
  2081. last editing.
  2082.  
  2083. =item unmatched [] in regexp
  2084.  
  2085. (F) The brackets around a character class must match.  If you wish to
  2086. include a closing bracket in a character class, backslash it or put it first.
  2087. See L<perlre>.
  2088.  
  2089. =item Unquoted string "%s" may clash with future reserved word
  2090.  
  2091. (W) You used a bare word that might someday be claimed as a reserved word.
  2092. It's best to put such a word in quotes, or capitalize it somehow, or insert
  2093. an underbar into it.  You might also declare it as a subroutine.
  2094.  
  2095. =item Unrecognized character \%03o ignored
  2096.  
  2097. (S) A garbage character was found in the input, and ignored, in case it's
  2098. a weird control character on an EBCDIC machine, or some such.
  2099.  
  2100. =item Unrecognized signal name "%s"
  2101.  
  2102. (F) You specified a signal name to the kill() function that was not recognized.
  2103. Say C<kill -l> in your shell to see the valid signal names on your system.
  2104.  
  2105. =item Unrecognized switch: -%s
  2106.  
  2107. (F) You specified an illegal option to Perl.  Don't do that.
  2108. (If you think you didn't do that, check the #! line to see if it's
  2109. supplying the bad switch on your behalf.)
  2110.  
  2111. =item Unsuccessful %s on filename containing newline
  2112.  
  2113. (W) A file operation was attempted on a filename, and that operation
  2114. failed, PROBABLY because the filename contained a newline, PROBABLY
  2115. because you forgot to chop() or chomp() it off.  See L<perlfunc/chop>.
  2116.  
  2117. =item Unsupported directory function "%s" called
  2118.  
  2119. (F) Your machine doesn't support opendir() and readdir().
  2120.  
  2121. =item Unsupported function %s
  2122.  
  2123. (F) This machines doesn't implement the indicated function, apparently.
  2124. At least, Configure doesn't think so.
  2125.  
  2126. =item Unsupported socket function "%s" called
  2127.  
  2128. (F) Your machine doesn't support the Berkeley socket mechanism, or at
  2129. least that's what Configure thought.
  2130.  
  2131. =item Unterminated <> operator
  2132.  
  2133. (F) The lexer saw a left angle bracket in a place where it was expecting
  2134. a term, so it's looking for the corresponding right angle bracket, and not
  2135. finding it.  Chances are you left some needed parentheses out earlier in
  2136. the line, and you really meant a "less than".
  2137.  
  2138. =item Use of $# is deprecated
  2139.  
  2140. (D) This was an ill-advised attempt to emulate a poorly defined awk feature.
  2141. Use an explicit printf() or sprintf() instead.
  2142.  
  2143. =item Use of $* is deprecated
  2144.  
  2145. (D) This variable magically turned on multiline pattern matching, both for
  2146. you and for any luckless subroutine that you happen to call.  You should
  2147. use the new C<//m> and C<//s> modifiers now to do that without the dangerous
  2148. action-at-a-distance effects of C<$*>.
  2149.  
  2150. =item Use of %s in printf format not supported
  2151.  
  2152. (F) You attempted to use a feature of printf that is accessible only
  2153. from C.  This usually means there's a better way to do it in Perl.
  2154.  
  2155. =item Use of %s is deprecated
  2156.  
  2157. (D) The construct indicated is no longer recommended for use, generally
  2158. because there's a better way to do it, and also because the old way has
  2159. bad side effects.
  2160.  
  2161. =item Use of bare << to mean <<"" is deprecated
  2162.  
  2163. (D) You are now encouraged to use the explicitly quoted form if you
  2164. wish to use a blank line as the terminator of the here-document.
  2165.  
  2166. =item Use of implicit split to @_ is deprecated
  2167.  
  2168. (D) It makes a lot of work for the compiler when you clobber a
  2169. subroutine's argument list, so it's better if you assign the results of
  2170. a split() explicitly to an array (or list).
  2171.  
  2172. =item Use of uninitialized value
  2173.  
  2174. (W) An undefined value was used as if it were already defined.  It was
  2175. interpreted as a "" or a 0, but maybe it was a mistake.  To suppress this
  2176. warning assign an initial value to your variables.
  2177.  
  2178. =item Useless use of %s in void context
  2179.  
  2180. (W) You did something without a side effect in a context that does nothing
  2181. with the return value, such as a statement that doesn't return a value
  2182. from a block, or the left side of a scalar comma operator.  Very often
  2183. this points not to stupidity on your part, but a failure of Perl to parse
  2184. your program the way you thought it would.  For example, you'd get this
  2185. if you mixed up your C precedence with Python precedence and said
  2186.  
  2187.     $one, $two = 1, 2;
  2188.  
  2189. when you meant to say
  2190.  
  2191.     ($one, $two) = (1, 2);
  2192.  
  2193. Another common error is to use ordinary parentheses to construct a list
  2194. reference when you should be using square or curly brackets, for
  2195. example, if you say
  2196.  
  2197.     $array = (1,2);
  2198.  
  2199. when you should have said
  2200.  
  2201.     $array = [1,2];
  2202.  
  2203. The square brackets explicitly turn a list value into a scalar value,
  2204. while parentheses do not.  So when a parenthesized list is evaluated in
  2205. a scalar context, the comma is treated like C's comma operator, which
  2206. throws away the left argument, which is not what you want.  See
  2207. L<perlref> for more on this.
  2208.  
  2209. =item Variable "%s" is not exported
  2210.  
  2211. (F) While "use strict" in effect, you referred to a global variable
  2212. that you apparently thought was imported from another module, because
  2213. something else of the same name (usually a subroutine) is exported
  2214. by that module.  It usually means you put the wrong funny character
  2215. on the front of your variable.
  2216.  
  2217. =item Variable syntax.
  2218.  
  2219. (A) You've accidentally run your script through B<csh> instead
  2220. of Perl.  Check the <#!> line, or manually feed your script
  2221. into Perl yourself.
  2222.  
  2223. =item Warning: unable to close filehandle %s properly.
  2224.  
  2225. (S) The implicit close() done by an open() got an error indication on the 
  2226. close(0.  This usually indicates your filesystem ran out of disk space.
  2227.  
  2228. =item Warning: Use of "%s" without parens is ambiguous
  2229.  
  2230. (S) You wrote a unary operator followed by something that looks like a
  2231. binary operator that could also have been interpreted as a term or
  2232. unary operator.  For instance, if you know that the rand function
  2233. has a default argument of 1.0, and you write
  2234.  
  2235.     rand + 5;
  2236.  
  2237. you may THINK you wrote the same thing as
  2238.  
  2239.     rand() + 5;
  2240.  
  2241. but in actual fact, you got
  2242.  
  2243.     rand(+5);
  2244.  
  2245. So put in parens to say what you really mean.
  2246.  
  2247. =item Write on closed filehandle
  2248.  
  2249. (W) The filehandle you're writing to got itself closed sometime before now.
  2250. Check your logic flow.
  2251.  
  2252. =item X outside of string
  2253.  
  2254. (F) You had a pack template that specified a relative position before
  2255. the beginning of the string being unpacked.  See L<perlfunc/pack>.
  2256.  
  2257. =item x outside of string
  2258.  
  2259. (F) You had a pack template that specified a relative position after
  2260. the end of the string being unpacked.  See L<perlfunc/pack>.
  2261.  
  2262. =item Xsub "%s" called in sort
  2263.  
  2264. (F) The use of an external subroutine as a sort comparison is not yet supported.
  2265.  
  2266. =item Xsub called in sort
  2267.  
  2268. (F) The use of an external subroutine as a sort comparison is not yet supported.
  2269.  
  2270. =item You can't use C<-l> on a filehandle
  2271.  
  2272. (F) A filehandle represents an opened file, and when you opened the file it
  2273. already went past any symlink you are presumably trying to look for.
  2274. Use a filename instead.
  2275.  
  2276. =item YOU HAVEN'T DISABLED SET-ID SCRIPTS IN THE KERNEL YET!
  2277.  
  2278. (F) And you probably never will, since you probably don't have the
  2279. sources to your kernel, and your vendor probably doesn't give a rip
  2280. about what you want.  Your best bet is to use the wrapsuid script in
  2281. the eg directory to put a setuid C wrapper around your script.
  2282.  
  2283. =item You need to quote "%s"
  2284.  
  2285. (W) You assigned a bareword as a signal handler name.  Unfortunately, you
  2286. already have a subroutine of that name declared, which means that Perl 5
  2287. will try to call the subroutine when the assignment is executed, which is
  2288. probably not what you want.  (If it IS what you want, put an & in front.)
  2289.  
  2290. =item [gs]etsockopt() on closed fd
  2291.  
  2292. (W) You tried to get or set a socket option on a closed socket.
  2293. Did you forget to check the return value of your socket() call?
  2294. See L<perlfunc/getsockopt>.
  2295.  
  2296. =item \1 better written as $1
  2297.  
  2298. (W) Outside of patterns, backreferences live on as variables.  The use
  2299. of backslashes is grandfathered on the righthand side of a
  2300. substitution, but stylistically it's better to use the variable form
  2301. because other Perl programmers will expect it, and it works better
  2302. if there are more than 9 backreferences.
  2303.  
  2304. =item '|' and '<' may not both be specified on command line
  2305.  
  2306. (F) An error peculiar to VMS.  Perl does its own command line redirection, and
  2307. found that STDIN was a pipe, and that you also tried to redirect STDIN using
  2308. '<'.  Only one STDIN stream to a customer, please.
  2309.  
  2310. =item '|' and '>' may not both be specified on command line
  2311.  
  2312. (F) An error peculiar to VMS.  Perl does its own command line redirection, and
  2313. thinks you tried to redirect stdout both to a file and into a pipe to another
  2314. command.  You need to choose one or the other, though nothing's stopping you
  2315. from piping into a program or Perl script which 'splits' output into two
  2316. streams, such as
  2317.  
  2318.     open(OUT,">$ARGV[0]") or die "Can't write to $ARGV[0]: $!";
  2319.     while (<STDIN>) {
  2320.         print;
  2321.         print OUT;
  2322.     }
  2323.     close OUT;
  2324.  
  2325. =back
  2326.  
  2327.