home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
OS/2 Shareware BBS: 10 Tools
/
10-Tools.zip
/
pcm45tkt.zip
/
bootdrv
/
itlutil
/
cube
/
cube.cmd
< prev
next >
Wrap
OS/2 REXX Batch file
|
1997-07-09
|
36KB
|
712 lines
/*
╔═══════════════════════════════════════════════════════════════════════╗
║ Config Update/Batch Editing ║
║ ║
║ Batch update of CONFIG.SYS-like files. CUBE modifies a Target ASCII ║
║ file, given a set of commands in a Procedure file. ║
║ ║
║ 04/06/93: V2.6 - Add 'procedure read from QUEUE' (from Steve Farrell)║
║ 03/06/93: V2.5 - Add IF/IFNOT to xLINE cmds (generalize N. Marks req)║
║ Correct ADDSTRING BEFORE option (Neil Marks) ║
║ 07/04/93: V2.4 - Corrected ADDBOTTOM/ADDTOP in ADDSTRING (Per Hertz) ║
║ Address cmd + CHECK Option + new exit rtne ║
║ 21/01/93: V2.3 - Added user defined string delimiter in CUBE cmds ║
║ 21/12/92: V2.2 - Added conditionnal command processing (WHEN) ║
║ 26/11/92: V2.1 - RS() for DL, DS (desinstallation case) ║
║ New LINEID command (strip leading chars) ║
║ ADDTOP,ADDBOTTOM for AS (W. Pachl requirement) ║
║ Fix Whereis (Walter Pachl). ║
║ Exit with SaveFile return code (Walter Pachl) ║
║ 18/11/92: V2.0 - Changes with environment variable substitution (RS) ║
║ (AS, RS, AL & AL now all have same RS() option) ║
║ Logging of all changes made to Target File ║
║ Adapt/Include some of Walter Pachl's enhancements: ║
║ Single CUBE command on command line ║
║ Add'l string substitution at command line level ║
║ PAUSE option (debugging purposes) ║
║ 05/11/92: V1.5 - AL with pre substitution ║
║ 03/11/92: V1.4 - AS with substitution ; fix RS recursion. ║
║ 02/11/92: V1.3 - Bug fixes & cmds abbrev, thanks to Walter Pachl. ║
║ Target Backup & lineid no more limited to col 1. ║
║ 30/10/92: V1.2 - Added env variable substitution + version # ║
║ 31/08/92: V1.1 - Bug fix ║
║ 21/07/92: V1.0 - Initial revision ║
║ Didier LAFON - LAFON at CBEPROFS ║
╚═══════════════════════════════════════════════════════════════════════╝ */
'@echo off'
version = '2.6'
pf = 0
if left(arg(1),1) = '{' then parse arg '{'PFile'}' TFile Bkup . '(' Opt
else do
parse arg PFile TFile Bkup . '(' Opt
pf = 1
end
parse upper source source /* who am I ? */
if pf then do
if PFile = '' then call Exit 0 'no procedure !' /* no or missing PFile */
if Pfile <> 'QUEUE' then if exists(PFile)='' then call Exit 0 PFile 'not found'
end
if TFile = '' then call Exit 0 'no target !' /* no or missing Tfile */
if exists(TFile)='' then call Exit 0 TFile 'not found'
pause=(wordpos('PAUSE',translate(Opt))>0) /* Pause mode ? */
chkmd=(wordpos('CHECK',translate(Opt))>0) /* Check mode ? */
ap = wordpos('MAKE',translate(Opt)) /* make specified ? */
if ap>0 then Make=translate(word(Opt,ap+1)) /* ...when */
else Make = '*' /* default make = all */
MWhen='*' /* Default when = all */
dlm = wordpos('DLM',translate(Opt)) /* New delimiter specified?*/
if dlm>0 then _d_=left(word(Opt,dlm+1),1) /* yes use it */
else _d_ = '"' /* else use default */
OnErr = 'STOP' /* Default OnError setting */
LStrip= '' /* No lineid strip */
CaseM = 'I' /* String compare default */
call get_cmdrs(Opt)
NumberOfChanges = 0
say arg
say 'CUBE' version 'applying' PFile 'to' TFile 'on' date() time()
if Bkup <> "" then do
address cmd 'copy' Tfile Bkup '1>nul 2>nul'
if rc = 0 then say Tfile 'backup is:' Bkup
end
Proc. = ''
if pf then do
If PFile = 'QUEUE' then Do
i = 1
Do Queued()
Parse Pull procline
proc.i = proc.i || upkw(procline)
if right(Proc.i,1) = ',' /* continuation char ? */
then proc.i=left(proc.i,length(proc.i)-1)' ' /* yes: blank it out */
else i = i + 1 /* no: new Proc line */
end
Proc.0 = i-1 /* Proc.0 = # of lines */
if Proc.0 <= 0 then call Exit 0 PFile 'empty'
end
Else do
i = 1 ; /* current Proc line: null */
do while lines(PFile) /* for all PFile's lines */
Proc.i = Proc.i || upkw(linein(PFile)) /* concat to Proc line */
if right(Proc.i,1) = ',' /* continuation char ? */
then proc.i=left(proc.i,length(proc.i)-1)' ' /* yes: blank it out */
else i = i + 1 /* no: new Proc line */
end
Proc.0 = i-1 /* Proc.0 = # of lines */
call close PFile
if Proc.0 <= 0 then call Exit 0 PFile 'empty'
End
end
else do
Proc.0 = 1
Proc.1 = upkw(Pfile)
end
i = 0
do while lines(TFile) /* for all TFile's lines */
i = i + 1 /* get line in */
Target.i = linein(TFile) /* Target. stem */
end
Target.0 = i /* Target.0 = # of lines */
call close Tfile
/* ╔═══════════════════════════════════════════════════════════════════════╗
║The real thing: go thru procedure file, interpret/execute its commands ║
║sequentially. ║
╚═══════════════════════════════════════════════════════════════════════╝ */
p = 0 /* Proc lines index */
do while p <= Proc.0 /* for all PFile's lines */
p = p + 1 /* index next line */
if Proc.p = '' then iterate /* ignore null lines */
parse var Proc.p Verb Parms /* Isolate command verb */
say ''
say '>>>' Proc.p
Verb = translate(Verb)
Select /* Process verb */
When left(Verb,1) = '*' then iterate
When left(Verb,2) = '--' then iterate
/* commands that always get executed */
When Verb = 'WHEN' then call APPLYWHEN
When Verb = 'ONERROR' then call ONERROR
When Verb = 'CASE' then call CASE
When Verb = 'LINEID' then call SLINEID
When wordpos(Make,MWhen)=0 then iterate
/* commands executed when WHEN/MAKE match */
When Verb = 'REPLINE' | verb = 'RL' then call REPLINE
When Verb = 'ADDLINE' | verb = 'AL' then call ADDLINE
When Verb = 'ADDSTRING' | verb = 'AS' then call ADDSTRING
When Verb = 'DELSTRING' | verb = 'DS' then call DELSTRING
When Verb = 'REPSTRING' | verb = 'RS' then call REPSTRING
When Verb = 'COMMENTLINE' | verb = 'CL' then call COMMENTL
When Verb = 'DELLINE' | verb = 'DL' then call DELLINE
Otherwise rc=OnErrorDo(p,"Don't know what to do")
end
if pause then Pull .
end
if chkmd = 0 then call exit 1 source 'ended.' /* It's OVER !! and OK !! */
if chkmd = 1 then call exit 2 source 'ended.' /* */
/* ╒═══════════════════════════════════════════════════════════════════════╕
│ Error report and action (based on Onerr setting, from ONERROR cmd) ╞
╘═══════════════════════════════════════════════════════════════════════╛ */
OnErrorDo:
parse arg line,msg
say PFile', line' line':' msg
if OnErr = 'STOP' then call Exit 0 source 'stopped.'
else return 0
/* ╒═══════════════════════════════════════════════════════════════════════╕
│ Searches All or First or Last lines in Target starting with string ╞
│ Returns the line number(s) found. ╞
╘═══════════════════════════════════════════════════════════════════════╛ */
Whereis: procedure expose Target. CaseM LStrip
parse arg string,direction,mode
if wordpos(direction,'F A')>0 then do; de=1; a=Target.0; par=1; end
else do; de=Target.0; a=1; par=-1; end
stringlength=length(string); ret = ''
do i = de to a by par
If CaseM = 'S' then do; T = Target.i ; S = string ; end
else do; T = translate(Target.i) ; S = translate(string) ; end
If length(LStrip) = 1 then T = strip(T,'L',Lstrip)
if mode=1 then do
if left(T,stringlength)=S then do
ret = ret i
if direction \= 'A' then leave
end
end
else do
if pos(S,T) > 0 then do
ret = ret i
if direction \= 'A' then leave
end
end
end
return ret
/* ╒═══════════════════════════════════════════════════════════════════════╕
│ Update Target file from Target. stem. Remove ' ' lines ╞
╘═══════════════════════════════════════════════════════════════════════╛ */
SaveFile:
address cmd 'erase' TFile
src = rc
if src = 0 then do
do i = 1 to Target.0
if Target.i = ' ' then iterate
rc=lineout(TFile,Target.i)
end
call close Tfile
end
return src
/* ╒═══════════════════════════════════════════════════════════════════════╕
│ Insert a line in Target file (stem) after line number i. ╞
╘═══════════════════════════════════════════════════════════════════════╛ */
Insert: procedure expose Target. NumberOfChanges
parse arg i string
if i = Target.0 then k = Target.0 + 1
else do
do j = Target.0 to i+1 by -1
k = j + 1
Target.k = Target.j
end
k = i + 1
end
Target.k = string
Target.0 = Target.0 + 1
say 'Inserted line' k ': "'Target.k'"'
NumberOfChanges = NumberOfChanges + 1
return
/* ╒═══════════════════════════════════════════════════════════════════════╕
│ returns a procedure command line with all strings uppercased, except╞
│ doubled-quoted strings. ╞
╘═══════════════════════════════════════════════════════════════════════╛ */
upkw: procedure expose vn. vv. _d_
parse arg sentence
sentence = strip(sentence)
phrase = ""
do forever
if sentence = '' then leave
if left(word(sentence,1),1) = _d_ then do
parse var sentence (_d_) y (_d_) sentence
phrase = phrase _d_ || y || _d_
end
else do
parse var sentence y sentence
phrase = phrase translate(y)
end
end
return phrase
/* ╒═══════════════════════════════════════════════════════════════════════╕
│ apply command line-specified substitutions within a string ╞
╘═══════════════════════════════════════════════════════════════════════╛ */
Cmdrs: procedure expose vn. vv.
parse arg y
do i = 1 to vn.0
out = ''
do forever
if pos(vn.i,y) > 0 then do
parse var y x (vn.i) y
out = out || x || vv.i
end
else leave
end
y = out || y
end
return y
/* ╒═══════════════════════════════════════════════════════════════════════╕
│ apply env. variables substitutions to STRING if req. in OPTION. ╞
╘═══════════════════════════════════════════════════════════════════════╛ */
Envrs: procedure
Parse arg String,Option
out = ''
parse var Option x 'RS('c')' .
if length(c) = 1 then do
do forever
parse var String x (c) name (c) String
if name = "" then leave
out = out || x || value(name,,'OS2ENVIRONMENT')
end
String = out || x
end
return String
/* ╒═══════════════════════════════════════════════════════════════════════╕
│ All that must be done to quit and more: say msg, save Target file if ╞
│ necessary (type=1). ╞
╘═══════════════════════════════════════════════════════════════════════╛ */
Exit:
parse arg type msg
src=0
Select
When type=1 then do
src = SaveFile()
if src <> 0 then msg = msg 'Error writing' TFile
else msg = msg NumberOfChanges 'changes applied'
end
When type=2 then do
src = NumberOfChanges
msg = msg NumberOfChanges 'changes applied'
end
Otherwise nop
End
say msg
Exit src
/* ┌─────────────────────────────────────────────────────────┐
│ ONERROR [CONTINUE] [STOP] : what to do on syntax errors │
└─────────────────────────────────────────────────────────┘ */
ONERROR:
if wordpos(translate(Parms),'CONTINUE STOP')>0 then OnErr = translate(Parms)
else rc=OnErrorDo(p,'On Error what ?')
return
/* ┌─────────────────────────────────────────────────────────┐
│ WHEN ... wordlist of when codes ... │
└─────────────────────────────────────────────────────────┘ */
APPLYWHEN:
MWhen = strip(translate(Parms),'B')
if MWhen = '*' then MWhen = Make
return
/* ┌─────────────────────────────────────────────────────────┐
│ CASE [SENSITIVE] [IGNORE] : string compare mode │
└─────────────────────────────────────────────────────────┘ */
CASE:
if wordpos(translate(Parms),'SENSITIVE IGNORE')>0 then CaseM = translate(left(Parms,1))
else rc=OnErrorDo(p,'Case what ?')
return
/* ┌─────────────────────────────────────────────────────────┐
│ LINEID [NOSTRIP] [STRIP "x"] │
└─────────────────────────────────────────────────────────┘ */
SLINEID:
Select
When word(translate(Parms),1) = 'NOSTRIP' then Lstrip = ""
When word(translate(Parms),1) = 'STRIP' then do
Parse var Parms 'STRIP' (_d_) ww (_d_)
if length(ww) <> 1 then rc=OnErrorDo(p,'Strip leading what ?')
else Lstrip = ww
end
Otherwise rc=OnErrorDo(p,'Lineid what ?')
end
return
/* ┌─────────────────────────────────────────────────────────┐
│ REPLINE lineid WITH replacement [( options] │
└─────────────────────────────────────────────────────────┘ */
REPLINE:
parse var Parms (_d_) Lineid (_d_) 'WITH' (_d_) With (_d_) '(' Opt
if Lineid = '' then do /* No line identifier */
rc=OnErrorDo(p,'Replace what line ?')
return
end
if With = '' then do /* No replacement string */
rc=OnErrorDo(p,'Replace line with ?') /* process error */
return /* ignore command */
end
With = Cmdrs(With) /* cmd substitution */
With = Envrs(With,Opt) /* env substitution if req */
dir = Searchdir(opt) /* What target lines ? */
mod = Lidmod(opt) /* floating line id ? */
select /* What if no target lines?*/
when wordpos('ADDTOP',Opt)>0 then after=0 /* add after line 0 */
when wordpos('ADDBOTTOM',Opt)>0 then after=Target.0 /* add after last line */
when wordpos('DONTADD',Opt)>0 then after=-1 /* don't add */
otherwise after=-1 /* don't add is the default*/
end
if ififnot() then return /* Process only when */
where = Whereis(Lineid,dir,mod) /* Get target lines numbers*/
if where \= '' then do /* if target(s) found */
do until where = '' /* process all targets */
parse var where w where /* 1 at a time */
was = Target.w /* save old value for log */
Target.w = With /* target = replacmnt. */
call logrep w,was,Target.w /* log action */
if dir \= 'A' then leave /* quit if not ALL */
end
end
else if after>-1 then call insert after With /* if no target, try add */
return
/* ┌───────────────────────────────────────────────────────────┐
│ ADDLINE line [( options] │
└───────────────────────────────────────────────────────────┘ */
ADDLINE:
parse var Parms (_d_) Line (_d_) '(' Opt
if Line = '' then do /* No line identifier */
rc=OnErrorDo(p,'Add what line ?') /* process error */
return /* ignore command */
end
select /* When to add ? */
when wordpos('IFNEW',Opt)>0 then always=0 /* if not already there */
when wordpos('ALWAYS',Opt)>0 then always=1 /* even if already there */
otherwise always=0 /* IFNEW is the default */
end
Line = Cmdrs(Line) /* cmd substitution */
Line = envrs(Line,Opt) /* env substitution if req */
mod = Lidmod(opt) /* floating line id ? */
exist = Whereis(Line,'F',mod) /* If this line exists and */
if exist \= '' & always = 0 then return /* IFNEW , don't add ! */
if ififnot() then return
select /* Where to add ? */
when wordpos('AFTER',Opt)>0 then do; /* 1) After a given line */
parse var Opt 'AFTER' (_d_) astr (_d_) . /* line identifier ? */
if astr = '' then after = Target.0 /* no id = add bottom */
else after = Whereis(astr,'F',mod) /* else get # of 1st */
parse var after after . /* line with this id. */
if after='' then do /* no match found */
if wordpos('ONLY',Opt)>0 then after=-1 /* if ONLY, don't add */
else after=Target.0 /* else add bottom */
end
end
when wordpos('BEFORE',Opt)>0 then do; /* 2) Before a given line */
parse var Opt 'BEFORE' (_d_) bstr (_d_) . /* line identifier ? */
if bstr = '' then after = 0 /* no id = add top */
else after = Whereis(bstr,'F',mod) /* else get # of 1st */
parse var after after . /* line with this id. */
if after ='' then do /* no match found */
if wordpos('ONLY',Opt)>0 then after=-1 /* if ONLY don't add */
else after=0 /* else add top */
end
else after=max(0,after-1) /* match found */
end
otherwise after=Target.0 /* 3) default = add bottom */
end
if after \= -1 then call insert after Line /* add the line */
return
/* ┌───────────────────────────────────────────────────────────┐
│ ADDSTRING string IN lineid [(Options] │
└───────────────────────────────────────────────────────────┘ */
ADDSTRING:
parse var Parms (_d_) With (_d_) 'IN' (_d_) Lineid (_d_) '(' Opt
if Lineid = '' then do /* No line identifier */
rc=OnErrorDo(p,'Add string where ?') /* process error */
return /* ignore command */
end
if With = '' then do /* No string to add */
rc=OnErrorDo(p,'Add what string ?') /* process error */
return /* ignore command */
end
With = Cmdrs(With) /* cmd substitution */
With = Envrs(With,Opt) /* env substitution if req */
dir=Searchdir(opt) /* Which target line ? */
mod=Lidmod(opt) /* floating line id ? */
where = Whereis(Lineid,dir,mod) /* Select target(s) */
if where \= '' then do /* if target found */
do until where = '' /* process target(s) */
parse var where w where /* 1 at a time */
if CaseM = 'S' then do
Tar= Target.w; Wi = With; end /* string compare mode */
else do
Tar = translate(Target.w); Wi=translate(With); end /* string compare mode */
if pos(Wi,Tar) > 0 & , /* String already there & */
wordpos('ALWAYS',Opt) = 0 then leave /* ALWAYS not specified. */
select /* Where to add ? */
when wordpos('AFTER',Opt)>0 then do /* 1) After a given string */
astr='' /* defaulted to null */
parse var Opt 'AFTER' (_d_) astr (_d_) . /* what is this string */
If CaseM = 'I' then astr=translate(astr)
was = Target.w /* save for logging */
if astr = '' | pos(astr,Tar)=0 /* if no string or no match*/
then Target.w = Target.w || With /* add at end of target */
else do
parse var Tar xx (astr) rest /* insert string after */
Target.w = xx || astr || With || rest /* specified string */
end
call logrep w,was,Target.w /* log action */
end
when wordpos('BEFORE',Opt)>0 then do /* 2) Before a given string*/
bstr='' /* defaulted to null */
parse var Opt 'BEFORE' (_d_) bstr (_d_) . /* what is this string */
If CaseM = 'I' then bstr=translate(bstr)
was = Target.w /* save for logging */
if bstr = '' | pos(bstr,Tar)=0 /* if no string or no match*/
then do /* add at beginning */
If CaseM = 'I' then Lid=translate(Lineid)
Parse var Tar (Lid) rest /* but after identifier */
Target.w = Lineid || With || rest /* */
end
else do
parse var Tar xx (bstr) rest /* insert string before */
Target.w = xx || With || bstr || rest /* specified string */
end
call logrep w,was,Target.w /* log action */
end
otherwise nop
end
if dir \= 'A' then leave /* leave if not ALL targets*/
end
end
else do /* no target : add line ? */
if wordpos('ADDTOP',Opt)>0 then call insert 0 Lineid || With
if wordpos('ADDBOTTOM',Opt)>0 then call insert Target.0 Lineid || With
end
return
/* ┌───────────────────────────────────────────────────────────┐
│ DELSTRING string [IN lineid] [(Options] │
└───────────────────────────────────────────────────────────┘ */
DELSTRING:
parse var Parms (_d_) What (_d_) 'IN' (_d_) Lineid (_d_) '(' Opt
if Lineid = '' then parse var Parms (_d_) What (_d_) '(' Opt
if What = '' then do /* No string to del */
rc=OnErrorDo(p,'Delete what string ?') /* process error */
return /* ignore command */
end
What = Cmdrs(What) /* cmd substitution */
What = envrs(What,Opt) /* env substitution if req */
dir=Searchdir(opt) /* Which target line ? */
mod=Lidmod(opt) /* floating line id ? */
where = Whereis(Lineid,dir,mod) /* Select target(s) */
if where \= '' then do /* if target found */
do until where = '' /* process target(s) */
parse var where w where /* 1 at a time */
do forever /* for all occurences */
if CaseM = 'S' then do
Tar = Target.w; Wh=What; end /* string compare mode */
else do
Tar = translate(Target.w); Wh=translate(What); end /* string compare mode */
if pos(Wh,Tar) > 0 then do /* String is there */
was = Target.w /* save for logging */
parse var Tar xx (Wh) rest /* isolate string */
Target.w = xx || rest /* delete string */
call logrep w,was,Target.w /* log action */
end
else leave
end
if dir \= 'A' then leave /* leave if not ALL targets*/
end
end
return
/* ┌───────────────────────────────────────────────────────────┐
│ REPSTRING ostring [WITH nstring] [IN lineid] [(Options] │
└───────────────────────────────────────────────────────────┘ */
REPSTRING:
parse var Parms (_d_) Ostr (_d_) 'WITH' (_d_) With (_d_) 'IN' (_d_) Lineid (_d_) '(' Opt
if Ostr = '' then do /* No old string specif. */
rc=OnErrorDo(p,'Replace what string ?') /* process error */
return /* ignore command */
end
if With = '' then parse var Parms (_d_) Ostr (_d_) 'IN' (_d_) Lineid (_d_) '(' Opt
if Lineid = '' then parse var Parms (_d_) Ostr (_d_) '(' Opt
if With = '' then With = Ostr /* No rep string specif. */
With = Cmdrs(With) /* cmd substitution */
With = envrs(With,Opt) /* env substitution if req.*/
dir=Searchdir(opt) /* Which target line ? */
mod=Lidmod(opt) /* floating line id ? */
where = Whereis(Lineid,dir,mod) /* Select target(s) */
do while where \= '' /* if target found */
parse var where w where /* 1 at a time */
was = Target.w
newtar = ''
do forever /* for all occurences */
if CaseM = 'S' then do
Tar = Target.w; Os=Ostr; end /* string compare mode */
else do
Tar = translate(Target.w); Os=translate(Ostr); end /* string compare mode */
if pos(Os,Tar) > 0 then do /* String is there */
parse var Tar xx (Os) rest /* isolate string */
newtar = newtar || xx || With /* replace occurrence */
Target.w = rest /* next */
end
else leave
end
Target.w = newtar || target.w
call logrep w,was,Target.w /* log action */
if dir \= 'A' then leave /* leave if not ALL targets*/
end
return
/* ┌─────────────────────────────────────────────────────────┐
│ COMMENTLINE lineid WITH type [(options ] │
└─────────────────────────────────────────────────────────┘ */
COMMENTL:
parse var Parms (_d_) Lineid (_d_) 'WITH' (_d_) cmnt (_d_) '(' Opt
if Lineid = '' then do /* No identifier */
rc=OnErrorDo(p,'Comment what ?') /* process error */
return /* ignore command */
end
if cmnt = '' then do /* No comment string */
rc=OnErrorDo(p,'Comment how ?') /* process error */
return /* ignore command */
end
dir=Searchdir(opt) /* Which target lines ? */
mod=Lidmod(opt) /* floating line id ? */
if ififnot() then return
where= whereis(Lineid,dir,mod) /* get target lines #s */
if where \= '' then do /* if match(es) found */
do until where = '' /* process target(s) */
parse var where w where /* 1 at a time */
was = Target.w /* save for logging */
Target.w = cmnt Target.w /* comment target */
call logrep w,was,Target.w /* log action */
if dir \= 'A' then leave /* leave if not ALL targets*/
end
end
return
/* ┌─────────────────────────────────────────────────────────┐
│ DELLINE lineid [(options ] │
└─────────────────────────────────────────────────────────┘ */
DELLINE:
parse var Parms (_d_) Lineid (_d_) '(' Opt
if Lineid = '' then do /* No identifier */
rc=OnErrorDo(p,'Delete what line ?') /* process error */
return /* ignore command */
end
Lineid = Cmdrs(Lineid) /* cmd substitution */
Lineid = envrs(Lineid,Opt) /* env substitution if req */
dir=Searchdir(opt) /* Which target line(s) ? */
mod=Lidmod(opt) /* floating line id ? */
if ififnot() then return
where= whereis(Lineid,dir,mod) /* Get target lin(s) #s */
if where \= '' then do /* if match(es) found */
do until where = '' /* process all targets */
parse var where w where /* one at a time */
say 'Deleted line' w
say ' was:' Target.w
NumberOfChanges = NumberOfChanges + 1
Target.w = ' ' /* mark for delete */
if dir \= 'A' then leave /* leave if not ALL targets*/
end
end
return
/* ┌─────────────────────────────────────────────────────────┐
│ SEARCHDIR: Direction for line search in Target File │
└─────────────────────────────────────────────────────────┘ */
Searchdir: procedure
select /* What target lines ? */
when wordpos('LAST',arg(1))>0 then dir='L' /* set reverse search */
when wordpos('FIRST',arg(1))>0 then dir='F' /* set forward search */
otherwise dir='A' /* default is all lines */
end
return dir
/* ┌─────────────────────────────────────────────────────────┐
│ LIDMOD: Identify line at 1st col or anywhere in line │
└─────────────────────────────────────────────────────────┘ */
Lidmod: procedure
if wordpos('*ID',arg(1))>0 then return(0)
else return(1)
/* ┌─────────────────────────────────────────────────────────┐
│ Stream functions (close & exists) │
└─────────────────────────────────────────────────────────┘ */
close:
return stream(arg(1),'C','CLOSE')
exists:
return stream(arg(1),'C','QUERY EXISTS')
/* ┌─────────────────────────────────────────────────────────┐
│ get substitution variables and their values in cmdline. │
│ ( RS(#aaa#=aaa #bbb#=bbb) │
│Output: vn.i = number and names of subst. variables │
│ vv.i = values of these variables │
│Adapted from Walter Pachl's │
└─────────────────────────────────────────────────────────┘ */
get_cmdrs: procedure expose vn. vv.
parse arg Opt
vn.0 = 0
p = pos('RS(',translate(Opt))
if p > 0 then do
rs = substr(Opt,p+3)
Parse var rs rs ')'
Do i=1 By 1 While rs<>''
rs=strip(rs,'L')
Parse Var rs vn '=' vv rs
if left(vn,1) = right(vn,1) then do
vn.i = vn
vv.i = vv
end
else call Exit 0 'Invalid substitution variables ('vn vv')'
End
vn.0=i-1
end
Return
/* ┌─────────────────────────────────────────────────────────┐
│ Log a change in a target line │
└─────────────────────────────────────────────────────────┘ */
logrep: procedure expose NumberOfChanges
parse arg ln,old,new
if old<>new then do
say 'Changed line' ln
say ' old: "'old'"'
say ' new: "'new'"'
NumberOfChanges = NumberOfChanges + 1
end
return
/* ┌─────────────────────────────────────────────────────────┐
│ Process IF/IFNOT logic for Lines commands │
│ returns 1 if IF/IFNOT condition is false !! │
│ returns 0 otherwise │
└─────────────────────────────────────────────────────────┘ */
ififnot:
if wordpos('IFNOT',Opt)>0 Then Do /* Process only when */
parse var Opt 'IFNOT' (_d_) istr (_d_) . /* another line doesn't */
iexist = Whereis(istr,'F',mod) /* exists */
if iexist \= '' then return(1) /* */
end /* */
if wordpos('IF',Opt)>0 Then Do /* Process only when */
parse var Opt 'IF' (_d_) istr (_d_) . /* another line exists */
iexist = Whereis(istr,'F',mod) /* */
if iexist = '' then return(1) /* */
end /* */
return(0)