OS/2 Shareware BBS: 10 Tools/10-Tools.zip/lansystk.zip/MPTSUTIL/SRVIFS/XI1.MSG

OS/2 Message File | 1998-05-08 | 9KB | 126 lines

MKMSGF
    C    t
 5 ; C M S Z
ECommand line invocation errors.  Either not all required parameters were specified or unsupported parameters/values were supplied.
ECONFIG.SYS file cannot be located as prescribed by the "/TU:" parameter.
EUnsupported value supplied for the "/D:" parameter on ThinIFS program invocation.
EValue supplied for the "/R:" parameter is invalid.
EValue supplied for the "/U:" parameter is invalid.
EUnsupported value supplied for the "/SRV:" parameter on ThinIFS invocation.
EUnsupported value supplied for the "/REQ:" parameter on ThinIFS invocation.
EUnsupported value supplied for the "/NS:" parameter on ThinIFS invocation.
EUnsupported value supplied for the "/W" parameter on ThinIFS invocation.
EUnsupported value supplied for the /A: parameter.
EError attempting to create the target path specified by the /T: parameter.
ENetBIOS not configured in CONFIG.SYS.
EUnable to read file attributes of the CONFIG.SYS file.
EUnable to set or restore file attributes of the CONFIG.SYS file.
EDrive letter %1 is already being used as a drive specifier on a SRVATTCH statement in the CONFIG.SYS file.
EError attempting to copy the file "%1" to target.
EUnsupported value for "ADAPTER =" statement on line %1 in response file.
EUnable to process response file.
ESyntax error on line %1 in response file.
EUnsupported value for "MAXFILES =" statement on line %1 in response file.
EInvalid value for "PATH =" statement or path on "ALIAS =" statement on line %1 in response file.
EInvalid value for "NAME =" statement on line %1 in response file.
EInvalid value for "GROUPNAME =" statement on line %1 in response file.
EUnable to open AuthList file "%1" for validation of users.
EInvalid value for "PERMITWRITE =" statement on line %1 in response file.
EInvalid value for "CLIENTWORKERS =" statement on line %1 in response file.
EInvalid value in "ALIAS =" statement on line %1 in response file.
EResponse file does not contain the required "PATH =" statement.
EInvalid entry in the AuthList file on line %1.
ECannot open log file as specified by the "/L1:" parameter on the invocation command line.
EInvalid value for "MAXCLIENTS =" parameter on line %1 in response file.
ESERVER file SERVICE.EXE already exists on the target.  The file will not be overlaid.
EError attempting to create the path "%1".
EUsage: [<path>]THINSRV /s: /t: /r: {/l1: /u: /tu:}
EUsage: [<path>]THINIFS /s: /t: /req: /srv: /d: {/l1: /ns: /a: /tu:}
EThe specified source is not valid.
EThe source must be a valid path specification.
EThe specified target is not valid.
I%1 completed successfully.
EUnable to write to %1; the return code is %2.
EUnable to read from %1; the return code is %2.
E%1 did not complete successfully.
EA syntax error caused SRVATTCH not to start.
IEnter the name of the Server.EThe drive letter was entered incorrectly.EThe SRVIFS redirector is not started on this system.
EThe LAN Adapter for SRVIFS is not active.
EThe SRVIFS DEVICE= statement, the IFS= statement, or both are not installed in CONFIG.SYS file.
EThe server name %1 cannot be found.
EThe alias name %1 was not found.
ESRVIFS could not start.
EThe specified drive could not be detached.
EDrive %1 is already assigned.
EThe connection request to server %1 is denied.
EThe client could not be attached to server %1.
EThe connection attempt was not successful.
EThe client could not be started.
EThe command could not be completed successfully.
E%1 failed with rc = %2.
IThe drive %1 attached successfully.
IEnter the client name.EThe client name must contain only letters and numbers.EAn invalid client name was specified.EThe specified adapter could not be used.IDefaultEA NetBIOS error occurred with rc = %1 (in decimal).
IAuthListEAdapter 0 failed to register with the network.
EAdapter 1 failed to register with the network.
ESRVIFS was unable to create a shared memory segment.
EThe configuration parameters defined in the SRVIFS Server .INI file exceeds the 64kb work area.
ESRVIFS was unable to create a system semaphore.
EThe PATH= statement, in the .INI file for SRVIFS, is missing or is incorrect.
EThe syntax for SERVICE is: SERVICE [ /Quit | /Force | /Status | /Authlist | /ini=name ].
EThe SERVICE command was not specified correctly.
ESERVICE was unable to open the adapters for requested NetBIOS configuration.
ESERVICE was unable to establish NetBIOS Services.
E%1 cannot be started.
IMAXFILESE%1 is not running.
I%1 Status Report Version %2IServer Name = %1IGroupname   = %1IAdapter     = %1IClient workers     = %1IMaximum Clients    = %1IMaximum Files      = %1IOpen    Files      = %1IAuthorizations     = %1IShutdown Requested = %1IAlias Name    Readwrite    PerClient    PathIActive Clients on Adapter 0 = %1IActive Clients on Adapter 1 = %1IClient Name       Session  Adapter  Address    OpenFiles  Current DirectoryIAlias    DriveIThere are no active Clients.IAuthorizations for the .LST file %1 are not enabled.EInsufficient session resources are available on adapter %1 : Requested = %2  Available = %3
EInsufficient command resources are available on adapter %1 : Requested = %2  Available = %3
EInsufficient names resources are available on adapter %1 : Requested = %2  Available = %3
EA NetBIOS reset call failed on adapter %1 with rc = %2.
IPERCLIENTENetBIOS could not add a name on adapter %1.  The rc = %2.
ESERVICE could not find the NetBIOS files on the system.
EThe return code for Listen was  %1 on adapter  %2.
IThe shutdown request was accepted.ISome clients are still active.  When the clients detach, the server will shut down.IThe authorization update was accepted.E%2 rejected a connection from %1.
ESession initiation from the client %1 timed out on adapter %2.
IALIASEUnknown case value %1 was received.
EA system semaphore was interrupted with rc = %1.
EAn unexpected RECEIVE return code = %1 was received on Adapter %2.
E%1 is terminating.
ILOGEXECEThe ADAPTER parameter could not be set.
EThe MAXCLIENTS parameter must be an integer.
EThe MAXCLIENTS parameter must be 1 to %1.
EThe MAXCLIENTS parameter could not be set.
EThe MAXFILES parameter must be 100 to %1.
EThe directory %1 specified for the PATH= parameter could not be found.
EThe PATH= parameter %1 is incorrect.
EAn incorrect value was used for NAME in the .INI file for SRVIFS.
EThe NAME parameter could not be set.
EThe GROUPNAME parameter could not be set.
EThe authorization list %1 could not be found.
EAn incorrect parameter was specified for AUTHLIST.
EThe LOGEXEC parameter %1 could not be found.
EThe alias directory %1 on line %2 of %3 could not be found.
EThe alias path specified on line %1 of %2 could not be found.
EThe read_style parameter is incorrect on line %1 of %2.
EThe alias access parameter is incorrect on line %1 of %2.
EThe alias %1 on line %2 of %3 could not be used.
EThe alias name on line %1 of %2 could not be used.
EAn alias syntax on line %1 of %2 was found.
EA syntax error was found on line %1 of %2.
EThe .INI file %1 for SRVIFS could not be opened.
EThe .INI file %1 for SRVIFS could not be found.
EThe memory allocation used for an authorization entry failed.
EThe authorization ID %1 could not be used.
EThe authorization address %2 for %1 could not be found.
EA blank entry was found on line %1 of the .LST file, but SERVICE is continuing.
ESERVICE was unable to open the .LST file %1.
INoIYesIBOTHEThe server name cannot be used.
IThe forced shutdown request was accepted.EThe MAXFILES parameter must be an integer.
EThe MAXFILES parameter value could not be used.
EThe PERMITWRITE parameter could not be used.
EThe PERCLIENT parameter could not be used.
EThe CLIENTWORKERS parameter must be an integer.
EThe CLIENTWORKERS parameter must be between 2 and %1.
EThe CLIENTWORKERS parameter could not be used.
I/QUITI/STATUSI/AUTHLISTI/INI=I/FORCEISRVIFS initialization has completed.
IADAPTERIMAXCLIENTSIPATHINAMEIGROUPNAMEICLIENTWORKERSIPERMITWRITEI%1 Server is active, Version %2IShutdown is complete for Server %1.EAn allocation error has occurred for the worker stack.