ICode Server SetupEUnable to open Code Server Setup profile (%1) return code (%2).
Profile is required to continue, terminating utility.ICode server reportEA "configuration" selection is required.EServer name (SRVNAME=) value missing for entry within file (%1). ESRVIFS flag (SRVIFSFLAG=) value missing for entry within file (%1). EApplication title (APPNAME=) value for entry within storage file, defaulted to nickname (%1).WApplication icon (APPICON=) value missing for entry within file (%1) for application %2.
A default icon has been assigned to the object.
Continue? Press YES to continue or NO to terminate processing.EApplication profile variable PROGTYPE= value (%1) is invalid.
o Value must be 1, 2, 3 or 4.
Application profile (%2) must be corrected before this operation can be performed.
Note: The setup utility must be stopped and restarted to apply profile changes.EStorage file %1 can not be accessed (rc=%2).
Check that the storage path (%3) is correct. If correct..IFatal error - Terminating ApplicationIWarning - Abnormal processing occurredICode Server Setup
Applet - Use as is
Copyright 1992, 1993, 1994
International Business Machines Corp.IGenerate LAN CID Utility casprep fileELAN CID utility casprep file specification (%1) is invalid or the path can not be accessed.ENo Applications are selected for LAN CID utility casprep file output.EGenerate LAN CID utility casprep file ended in error rc=(%1).EAn error was encountered removing application (%1) images. The following directories should have been deleted:
Image: %2
Work: %3
DLL: %4EAn error was encountered reading the configuration file (%1) rc=(%2).
The utility is unable to display details of the configuration file.IApplication (%1) Images removed from Code Server successfully.
The following Application directories and contents ARE NOT automatically removed:
Response: %2
Log: %3IPatience - Loading application images for %1.IApplication %1 was loaded on the Code server successfully.IApplication %1 Image load failed (rc=%2).IApplication %1 was registered as loaded on the Code Server.IApplication Image loadICode server report fileI* Date: %1 Time: %2 IClient (Boot) Diskettes created successfully.ICreate Client DiskettesILoad SRVIFS supportILoad SRVIFS support completed successfully.IRemove SRVIFS supportIRemove SRVIFS support completed successfully.IWARNING all SRVIFS support will be removed from Code Server path (%1).IWARNING the Application Images for (%1) will be removed from Code Server (%2).
The following directories and all files WILL be removed:
Images: %3
Work: %4
DLL: %5IRemove Application Images from Code ServerISRVIFS Configuration ParametersICode Server SettingsICode Server Setup settingsIRemove Application Images from Code ServerEError encountered creating Client (boot) diskettes, rc=(%1).EError encountered loading SRVIFS support on code server, rc=(%1).ETarget path (%1) can not be accessed.ESource path (%1) can not be accessed.ETarget path is required.ESource path must be valid and accessible.ECode Server path (%1) can not be accessed.ERemove SRVIFS support failed with a return code of (%1).ESRVIFS removal was requested, but SRVIFS has not been loaded.ETarget drive is required input.
ETarget drive (%1) is invalid or can not be accessed.
Note: Target drive must be either "A:" or "B:".EClient name is invalid or blank.
When Client Identification Method = "CLIENT" then Client name is required.
o Client name must not be blank.
o Client name must be composed of characters A-Z, z-z or 0-9.EInvalid Maximum Session number (%1). The value must be between (%2) and (%3).
Update Code Server Settings notebook "SRVIFS" page.EInvalid Files open number (%1). The value must be between (%2) and (%3).
Update Code Server Settings notebook "SRVIFS" page.EInvalid Maximun Threads number (%1). The value must be between (%2) and (%3).
Update Code Server Settings notebook "SRVIFS" page.ECode Server drive (%1) is invalid or can not be accessed.ECode Server name (%1) is invalid or blank.
Server name is required and must be composed of characters A-Z, a-z or 0-9.ECode Server Client default access drive is a required field.EAttempting to load "FIX" for Application (%1) which has not been loaded.
Primary Application must be loaded prior to "FIX".ECode Server Setup "Persistent Storage file path" is a required field.
o File path must specify a drive and optionally a path.ECode Server Setup "Persistent Storage file path" (%1) can not be accessed.
o Insure that the drive is accessible.
o Insure that the path is valid and exists.EAdapter number is a required field.
Update Code Server Settings notebook "SRVIFS" page.EApplication nick name is missing from application profile.
Load process is unable to proceed.IDiskette Build Configuration File DetailsIReport generation completed successfully.EApplication nick name (%1) is not unique.
Application (%2) has the same nick name.EApplication nick name (%1) is invalid.
Nick name must not contain the following characters:
"." (period), ":" (colon),
"\" (slash), " " (blank)
"?" (question mark), "%" (percent sign)ILAN CID utility casprep file generated successfully.EUnable to generate LAN CID utility casprep file
An included Application requires a maintenance system.
And no Operating System was selected for maintenance system.EError unable to generate LAN CID utility casprep file
The Client boot drive letter (%1) is invalid.
o Drive letter is required.
o Drive letter must not be "A" or "B".EUnable to generate LAN CID utility casprep file
The Maintenance system drive letter (%1) is invalid.
o Drive letter is required.
o Drive letter must not be "A" or "B".ELAN CID utility target drive is required.EThe drive to the SRVIFS client / LAN CID utility target (%1) is invalid or can not be accessed.EAlias is a required field.EAlias (%1) is invalid.
o Alias must be composed of only characters A-Z, a-z or 0-9.
o Alias must not be blank.
o Alias must be eight character or less.IClient access alias definitionsEAlias drive (%1) is invalid or not accessible.EAlias name duplicates and existing alias name (%1).EAlias name (%1) can not be deleted.
It is used by Application (%2).
The Alias is necessary in order to access the Applications information.EAlias name (%1) can not be deleted.
It is used within the Code Server Settings for Client (%2) access.
The Alias is necessary in order to access Application information.EAlias name (%1) can not be deleted.
It is used within the Code Server Settings for Client (%2) access.
The Code Server Settings can be updated and then the Alias can be deleted as no application images have been loaded.EAlias name (%1) can not be deleted.
It is used within the Code Server Settings as the default image alias.
Change the default value and then the Alias can be deleted.EApplication container "Application Profile directory path" can not be accessed.
o Path (%1).
o Insure that the drive is accessible.
o Insure that the paths are valid and exist.IApplication Container Settings NotebookEUnable to generate LAN CID Utility command file.
o One or both of the required files can not be located.
o The files, CASPREP.CMD and CASBASE.FILE, should be located within directory
(%1).ETarget path is invalid or can not be accessed.
o Alias (%1)
o Path (%2)
o Directory (%3)ISRVIFS configuration has been updated successfully.
Changes are caused by either adding / deleting ALIAS definitions or SRVIFS parameter values. In order for the changes to take affect the SRVIFS server must be stopped and then restarted. You may issues the following from an OS/2 command prompt:
o SERVICE /S to check status.
o SERVICE /Q to stop the server.
o SERVICE /F to force stop the server.ISRVIFS Server configuation changesEUnable to build SRVIFS configuration "ini" file (%1).
o Check to insure that the file is not read-only.EBoot drive field (%1) is invalid.EUnable to access Code Server report file (%1).
Insure that the report file specification is valid.ICode Server Utility InstallationIOperating System level (%1) must be OS/2 2.x or greater.ITerminating installation processing.ITarget Path parameter /T= is required with Log /L= parameter.IEnter target path for installing Code Server Utility ->IRequested installation drive (%1) can not be accessed.IUnable to change to or create target (%1).IError encountered copying files rc(%1).I--- Copying Code Server Setup FilesI--- Establishing Execution profileI Error updating CASSETUP profile rc(%1)I--- Creating Workplace shell objectI Code Server Setup WorkPlace object createdI Error creating Code Server WorkPlace object rc(%1)ICode Server installation endedIInvalid parameter (%1) passed to installation program.Etarget path (%2) is invalid.
For Application (%1).
o Path can not be for drive "A" or "B".
o Path can not contain characters: /:*"<>|,+=[];&?EPath (%1) is invalid, insure that it is only path information.
o Path can not contain characters: /:*"<>|,+=[];&?EFailure in creating backup copy prior to updating storage file.
Insure that the drive and path access to (%1) are valid and that the storage directory has disk space.
Press "YES" button to retry or "NO" button to cancel the storage operation.
If the storage operation is cancelled, all records of updates made since the utility was lasted stored will be lost.ICode server setup storage processingEUnable to access or create Server directory (%1).EField (%1) does not contain a fully qualified path.ITesting drive / pathEUnable to make subdirectory (%1) within path (%2).
o Insure that the directory value is valid before retrying.EUnable to make / change to target path (%1).EUnable to change to drive within target path (%1).EAlias name (%1) can not be deleted.
It is used as the LAN CID utility alias established during SRVIFS/LAN CID utility load.
The Alias can not be deleted while SRVIFS/LAN CID utility is loaded.EAdapter type selection is required.EDrive (%1) is either not valid or accessible.EUnable to access NIF file list (%1).
o Insure that the path and file name are valid and the file exists.EUnable to access code server report file (%1).
Problem - %2.EError encountered writing code server report file (%1).
Ensure that sufficient space is available for the report file.ETarget drive (%1) is invalid.
o Target drive can not be either "A" or "B".EAlias (%1) can not be found, check Alias definitions.EAn error was encountered saving the code server setup persistent storage file.
o The last operation executed will not be recorded within the storage file.
o Insure sufficient disk space is available for storage file (%1) prior to attempting other operations.ICode Servers ContainerECode server title can not be blank.EThe combination of command line parameters is greater than the valid length (%1) by %2 character(s).
The operating system command processor can not execute this command.
o This situation is caused by long paths derived from Alias' and subdirectories.EUnable to read NIF file list (%1).
NIF file list is used to define the available Network Interface Files in order to provide "Adapter selection Types".?
PCASENG1 copies an application's code images.
Correct invocation is
CASENG1 /S=src /T=tgt /W=wkdir /P=profPHelp RequestedEThe program was invoked with a bad command line:
CASENG1 %1
Correct invocation is
CASENG1 /S=src /T=tgt /W=wkdir /P=prof /D=dlldir /F=fixdirPProgram Invocation ErrorEThe file %1 is not a valid application profile. PBad Application ProfileERexxUtil could not be loaded on this machine. It may not have been installed during operating system installation, or REXXUTIL.DLL may not be in a LIBPATH directory. PCan't find REXXUTILPInsert
in drive %2 EAn error occured executing
The return code was %2PCommand Execution ErrorPInsert DiskettePYou chose to cancel this operation. Is that really what you want to do?PAre you sure??
EThe application to be applied to the diskettes, %1, is not loaded on this code serverPApplication Not FoundEThe application profile
was not found.PApplication Profile Not FoundECould not find the images directory
for application %2PApplication Images Not FoundEThe Application's work directory,
was not foundPWork Directory Not FoundPCASENG3 builds boot diskettes
Correct invocation is
CASENG3 /S=script /T=tgt /D=databasePCASENG3 HelpPCommand Line ErrorEData specified for the command line /S parm was either missing or incorrect.
Data specified was %1 EData specified for the command line /D parm was either missing or incorrect.
Data specified was %1ENo data was specified for the command line /T parm.EThe Boot Diskette Build script file %1 contains no commands.PBoot Diskette Build-Script ErrorESRVIFS must be loaded on the code server before boot diskettes can be created PSRVIFS not on Code Server
EThe application profile %1 did not contain the command line specified in the diskette-build script.
E%1 failed with rc=%2 at %3 in %4.
PFatal Error
PInsert Diskette
PConfirmation
PLAPS Not Installed
PREXX Not Installed
PErrors Logged
PProgram Not Found
PInvalid Version
PCONFIG.SYS Modified
EThe operating system for the code server has to be at IBM OS/2 version 2.0 or greater.
EThe source path does not contain the Redirected Installation Support programs (for example, \APPLETS\MPTSAPLT.ZIP).
Please insert the one of the following diskettes into drive %1:
* MPTS Utilities Diskette (diskette 3)
* NTS/2 Utilities diskette (WR07060 or later)
* NTS/2 Service Pak WR07060 Bonus Pak diskette
Or, select the Cancel pushbutton and correct the source path.
PA version of CASAGENT.EXE is already installed. Do you want to continue with this install?
EREXX is not installed on this workstation. REXX is required for Redirected Install Support. Before continuing, you must first install REXX using the OS/2 installation program.
ELAPS must be installed and configured for NETBIOS for this Code Server to be operational.
Before retrying this operation use the MPTS.EXE program on the MPTS diskette 1 or the LAPS.EXE program on the NTS/2 LAPS diskette to install and configure LAPS.
PThe source diskette drive is not ready.
Please insert the one of the following diskettes into the source drive to continue:
* MPTS Utilities Diskette (diskette 3)
* NTS/2 Utilities diskette (WR07060 or later)
* NTS/2 Service Pak WR07060 Bonus Pak diskette
EThe PKUNZIP2.EXE program is required for the installation of Redirected Install Support.
Insert one of the following diskettes into the source drive:
* MPTS diskette 1
* NTS/2 LAPS diskette
EThe disk does not contain the PKUNZIP2.EXE program.
Insert the correct diskette (MPTS diskette 1 or NTS/2 diskette 1) into the A drive or select the Cancel pushbutton.
EThere is %1 bytes available on the "%2" drive. The load for this drive requires %3 bytes. Do you want to continue with the load?
ERefer to, %1, for an explanation of the %2 failure.
PThe subdirectory, %1, has been added to the PATH= and DPATH= statements in CONFIG.SYS.
Stop the Code Server Setup Utility, then shutdown and restart this workstation.
STARTUP.CMD was also updated.
PInsufficient Diskspace
PMaximum Path Exceeded
EThe path, %1, exceeds the maximum by %2 character(s).
PInvalid Drive/Path
EThe syntax of the path, %1, is not correct or is not accessible. Correct the specified drive/path or make it accessible and retry the load.
PBoot Diskette InformationPBoot diskettes created will be created for use with default command files.
Command files generated by CASSETUP may need to be modified before they can be used with these diskettes.
See the LAN CID Utility Guide for information.EData specified for the command line /P parameter is missing or incorrect.
Data specified was
%1PApp Not in DatabaseEThe application
which is needed for the install, is not on this code server.PApplication Profile Not FoundEThe input file
did not specify any application profiles.PCASPREP Advanced Format input filePGenerated by %1, Version %2 Pat %1 on %2 P%1 was invoked with these parameters:PApplications to be installed taken from file %1Pthe contents of which were:EThe list of programs to be installed included two operating systems:
%1 and %2 PCommand file can not be builtPThe list of programs to be installed included two fixes to the same component:
%1 and %2 EIncorrect or invalid information was specified for the the command line %1 parameter. Data specified was:
%2PBad Command LinePCASENG6 builds LCU command files. Correct invocation is
CASENG6 /P=<profile list> /T=<target>
/D=<database> /R=<parms>PCASENG6 HelpEDrive %1 is not ready to write on. Press OK when it is ready.PDrive Not ReadyP**** No Command Line found. Check INSTCMD line in app profile ****EDisk Full trying to write %1. Free some space and press OK to continue.EUnable to write %1. Press OK to retry or CANCEL to end.PError Writing CASPREP FileP**** No Command Line found. Check %1 line in app profile ****POS Fix Mismatch
EThe OS fix level specified does not apply to the version of the operating system being installed.PThere may be one or more errors in the CASPREP file because of blank or missing information in one or more application profiles.
In particular, check the "invoke" lines in the :prog sections.
PPossible CASPREP file errors
P**** No OS Installed on Code Server ****
ESRVIFS/LAN CID Utility support must be loaded prior to this application.EApplication nick name (%1) must be loaded prior to this application.IChanging an alias selection will cause all references to these files (loaded or registered) to be done using the newly selected alias.
If you want future operations (such as removing an application, creating CASPREP files or creating client boot diskettes) to function properly, you must insure that the files have been copied or moved to the new alias directory structure for CASSETUP and subsequent LAN CID Utility operations.IThe code server image directory, for application %1, is shared by application: %2
No files or directories will be removed, but all references to application %3 will be removed.IGenerate LAN CID Utility command fileESelected casprep file (%1) does not exist.ILAN CID Utility command file (%1) created.ELAN CID Utility command file creation ended in error (rc=%1).ESRVIFS / LAN CID Utility must be installed prior to this operation.?
(.txt)