home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
OS/2 Shareware BBS: 10 Tools
/
10-Tools.zip
/
detk45he.zip
/
ERRLOG.H
< prev
next >
Wrap
C/C++ Source or Header
|
1999-04-29
|
35KB
|
1,038 lines
/**************************************************************************/
/* */
/* IBM OS/2(tm) Local Area Network (LAN) Server */
/* Version 5.03 */
/* (C) Copyright IBM Corp. 1988, 1998 */
/* Licensed Materials - Property of IBM */
/* */
/**************************************************************************/
/********************************************************************/
/********************************************************************
* *
* About this file ... ERRLOG.H *
* *
* This file contains information about the NetErrorLog APIs. *
* *
* Function prototypes. *
* *
* Data structure templates. *
* *
* Definition of special values. *
* *
* *
* NOTE: You must include NETCONS.H before this file, since this *
* file depends on values defined in NETCONS.H. *
* *
********************************************************************/
#ifndef NETERRLOG_INCLUDED
#define NETERRLOG_INCLUDED
#pragma pack(1)
/****************************************************************
* *
* Data Structures for LogRead *
* *
****************************************************************/
#ifndef LOGFLAGS_FORWARD
typedef struct loghandle
{
unsigned long time; /* Timestamp of first record */
unsigned long last_flags; /* Last call's flags */
unsigned long offset; /* Current byte offset in log */
unsigned long rec_offset; /* Current record offset in log */
} HLOG;
#define LOGFLAGS_FORWARD 0
#define LOGFLAGS_BACKWARD 0x1
#define LOGFLAGS_SEEK 0x2
#endif
/****************************************************************
* *
* Function prototypes *
* *
****************************************************************/
extern API_FUNCTION
NetErrorLogClear ( const unsigned char LSFAR * pszServer,
const unsigned char LSFAR * pszBackupFile,
unsigned char LSFAR * pszReserved );
extern API_FUNCTION
NetErrorLogOpen ( const unsigned char LSFAR * pszServer,
unsigned LSFAR * phErrorLog,
unsigned char LSFAR * pszReserved );
extern API_FUNCTION
NetErrorLogRead ( const unsigned char LSFAR * pszServer,
const unsigned char LSFAR * pszReserved1,
HLOG LSFAR * phErrorLog,
unsigned long ulOffset,
unsigned short LSFAR * pusReserved2,
unsigned long ulReserved3,
unsigned long flOffset,
unsigned char LSFAR * pbBuffer,
unsigned short cbBuffer,
unsigned short LSFAR * pcbReturned,
unsigned short LSFAR * pcbTotalAvail );
extern API_FUNCTION
NetErrorLogWrite ( unsigned char LSFAR * pszReserved1,
unsigned short usCode,
const unsigned char LSFAR * pszComponent,
const unsigned char LSFAR * pbBuffer,
unsigned short cbBuffer,
const unsigned char LSFAR * pszStrBuf,
unsigned short cStrBuf,
unsigned char LSFAR * pszReserved2 );
/****************************************************************
* *
* Data structure templates *
* *
****************************************************************/
struct error_log {
unsigned short el_len;
unsigned short el_reserved;
unsigned long el_time;
unsigned short el_error;
unsigned char el_name[SNLEN+1];
unsigned short el_data_offset;
unsigned short el_nstrings;
}; /* error_log */
#ifdef PURE_32
/****************************************************************
* *
* Function prototypes for "pure" 32-bit code *
* *
****************************************************************/
extern API32_FUNCTION
Net32ErrorLogClear ( const unsigned char * pszServer,
const unsigned char * pszBackupFile,
unsigned char * pszReserved );
extern API32_FUNCTION
Net32ErrorLogRead ( const unsigned char * pszServer,
const unsigned char * pszReserved1,
HLOG * phErrorLogHandle,
unsigned long ulOffset,
unsigned short * pusReserved2,
unsigned long ulReserved3,
unsigned long ulOpenflags,
unsigned char * pbBuffer,
unsigned long ulBuffer,
unsigned long * pulReturned,
unsigned long * pulTotalAvail );
extern API32_FUNCTION
Net32ErrorLogWrite ( unsigned char * pszReserved1,
unsigned short usCode,
const unsigned char * pszComponent,
const unsigned char * pbBuffer,
unsigned long ulBuffer,
const unsigned char * pszStrBuf,
unsigned short cStrBuf,
unsigned char * pszReserved2 );
#endif /* PURE_32 */
/****************************************************************
* *
* Special values and constants *
* *
****************************************************************/
#define ERRLOG_BASE 3100 /* NELOG errors start here */
/*
* Generic (could be used by more than one service)
* error log messages from 0 to 25
*/
#define NELOG_Internal_Error (ERRLOG_BASE + 0)
/*
* The operation failed because a network software error occurred.
*/
#define NELOG_Resource_Shortage (ERRLOG_BASE + 1)
/*
* The system ran out of a resource controlled by the %1 option.
*/
#define NELOG_Unable_To_Lock_Segment (ERRLOG_BASE + 2)
/*
* The service failed to obtain a long-term lock on the
* segment for NCBs. The error code is the data.
*/
#define NELOG_Unable_To_Unlock_Segment (ERRLOG_BASE + 3)
/*
* The service failed to release the long-term lock on the
* segment for NCBs. The error code is the data.
*/
#define NELOG_Uninstall_Service (ERRLOG_BASE + 4)
/*
* There was an error stopping service %1.
* The error code from NetServiceControl is the data.
*/
#define NELOG_Init_Exec_Fail (ERRLOG_BASE + 5)
/*
* Initialization failed because of an OS/2 exec failure on
* path %1. The OS/2 error code is the data.
*/
#define NELOG_Ncb_Error (ERRLOG_BASE + 6)
/*
* An unexpected NCB was received. The NCB is the data.
*/
#define NELOG_Ioctl_Error (ERRLOG_BASE + 8)
/*
* A DosDevIoctl or DosFsCtl to NETWKSTA.SYS failed.
* The data shown is in this format:
* DWORD approx CS:IP of call to ioctl or fsctl
* WORD error code
* WORD ioctl or fsctl number
*/
#define NELOG_System_Semaphore (ERRLOG_BASE + 9)
/*
* Unable to create or open system semaphore %1.
* The error code is the data.
*/
#define NELOG_Init_OpenCreate_Err (ERRLOG_BASE + 10)
/*
* Initialization failed because of an open/create error on the
* file %1. The OS/2 error code is the data.
*/
#define NELOG_NetBios (ERRLOG_BASE + 11)
/*
* An unexpected NetBios error occurred.
* The error code is the data.
*/
#define NELOG_SMB_Illegal (ERRLOG_BASE + 12)
/*
* An illegal SMB was received.
* The SMB is the data.
*/
#define NELOG_Service_Fail (ERRLOG_BASE + 13)
/*
* Initialization failed because the requested service %1
* could not be started.
*/
#define NELOG_Entries_Lost (ERRLOG_BASE + 14)
/*
* Some entries in the error log were lost because of a buffer
* overflow.
*/
/*
* Server specific error log messages from 20 to 40
*/
#define NELOG_Init_Seg_Overflow (ERRLOG_BASE + 20)
/*
* Initialization parameters controlling resource usage other
* than net buffers are sized so that too much memory is needed.
*/
#define NELOG_Srv_No_Mem_Grow (ERRLOG_BASE + 21)
/*
* The server cannot increase the size of a memory segment.
*/
#define NELOG_Access_File_Bad (ERRLOG_BASE + 22)
/*
* Initialization failed because account file: %1 is either incorrect
* or not present.
*/
#define NELOG_Srvnet_Not_Started (ERRLOG_BASE + 23)
/*
* Initialization failed because network: %1 was not started.
*/
#define NELOG_Init_Chardev_Err (ERRLOG_BASE + 24)
/*
* The server failed to start. Either all three chdev
* parameters must be zero or all three must be nonzero.
*/
#define NELOG_Remote_API (ERRLOG_BASE + 25)
/* A remote API request was halted due to the following
* invalid description string: %1.
*/
#define NELOG_Ncb_TooManyErr (ERRLOG_BASE + 26)
/* The network %1 ran out of NCBs. You may need to increase NCBs
* for this network. The following information includes the
* number of NCBs submitted by the server when this error occurred:
*/
#define NELOG_Mailslot_err (ERRLOG_BASE + 27)
/* The server cannot create the %1 mailslot needed to send
* the ReleaseMemory alert message. The error received is:
*/
#define NELOG_ReleaseMem_Alert (ERRLOG_BASE + 28)
/* The server failed to register for the RELEASEMEMORY alert,
* with recipient %1. The error code from
* NetAlertStart is the data.
*/
#define NELOG_AT_cannot_write (ERRLOG_BASE + 29)
/* The server cannot update the AT schedule file. The file
* is corrupt.
*/
#define NELOG_Cant_Make_Msg_File (ERRLOG_BASE + 30)
/* The server encountered an error when calling
* NetIMakeLMFileName. The error code is the data.
*/
#define NELOG_Exec_Netservr_NoMem (ERRLOG_BASE + 31)
/* Initialization failed because of an OS/2 exec failure on
* path %1. There is not enough memory to start the process.
* The OS/2 error code is the data.
*/
#define NELOG_Server_Lock_Failure (ERRLOG_BASE + 32)
/* Longterm lock of server buffers failed.
* Check swap disk free space and reboot system to start server.
*/
/*
* Message service and POPUP specific error log messages from 40 to 55
*/
#define NELOG_Msg_Shutdown (ERRLOG_BASE + 40)
/*
* The service has stopped due to repeated consecutive
* occurrences of an NCB error. The last bad NCB follows
* in raw data.
*/
#define NELOG_Msg_Sem_Shutdown (ERRLOG_BASE + 41)
/*
* The Message server has stopped due to a lock on the
* Message server shared data segment.
*/
#define NELOG_Msg_Log_Err (ERRLOG_BASE + 50)
/*
* A file system error occurred while opening or writing to the
* system message log file, %1. Message logging has been
* switched off due to the error. The error code is the data.
*/
#define NELOG_VIO_POPUP_ERR (ERRLOG_BASE + 51)
/*
* Unable to display message POPUP due to OS/2 VIO call error.
* The error code is the data.
*/
#define NELOG_Msg_Unexpected_SMB_Type (ERRLOG_BASE + 52)
/*
* An illegal SMB was received. The SMB is the data.
*/
/*
* Requester specific error log messages from 60 to 75
*/
#define NELOG_Wksta_Infoseg (ERRLOG_BASE + 60)
/*
* The workstation information segment is bigger than 64K bytes.
* The size follows, in DWORD format:
*/
#define NELOG_Wksta_Compname (ERRLOG_BASE + 61)
/*
* The workstation was unable to get the name-number of computer name.
*/
#define NELOG_Wksta_BiosThreadFailure (ERRLOG_BASE + 62)
/*
* The workstation could not initialize the Async NetBios Thread.
* The error code is the data.
*/
#define NELOG_Wksta_IniSeg (ERRLOG_BASE + 63)
/*
* The workstation could not open the initial shared segment.
* The error code is the data.
*/
#define NELOG_Wksta_HostTab_Full (ERRLOG_BASE + 64)
/*
* The workstation host table is full.
*/
#define NELOG_Wksta_Bad_Mailslot_SMB (ERRLOG_BASE + 65)
/*
* A bad mailslot SMB was received. The SMB is the data.
*/
#define NELOG_Wksta_UASInit (ERRLOG_BASE + 66)
/*
* The workstation encountered an error while trying to start the UAS.
* The error code is the data.
*/
#define NELOG_Wksta_SSIRelogon (ERRLOG_BASE + 67)
/*
* The workstation encountered an error while responding to an SSI revalidation request.
* The function code and the error codes are the data.
*/
/*
* Alerter service specific error log messages from 70 to 79
*/
#define NELOG_Build_Name (ERRLOG_BASE + 70)
/*
* The Alerter service had a problem creating the list of
* alert recipients. The error code is %1.
*/
#define NELOG_Name_Expansion (ERRLOG_BASE + 71)
/*
* There was an error expanding %1 as a group name. Try
* splitting the group into two or more smaller groups.
*/
#define NELOG_Message_Send (ERRLOG_BASE + 72)
/*
* There was an error sending %2 the alert message -
* (
* %3 )
* The error code is %1.
*/
#define NELOG_Mail_Slt_Err (ERRLOG_BASE + 73)
/*
* There was an error in creating or reading the alerter mailslot.
* The error code is %1.
*/
#define NELOG_AT_cannot_read (ERRLOG_BASE + 74)
/*
* The server could not read the AT schedule file.
*/
#define NELOG_AT_sched_err (ERRLOG_BASE + 75)
/*
* The server found an invalid AT schedule record.
*/
#define NELOG_AT_schedule_file_created (ERRLOG_BASE + 76)
/*
* The server could not find an AT schedule file so it created one.
*/
#define NELOG_Srvnet_NB_Open (ERRLOG_BASE + 77)
/*
* The server could not access the %1 network with NetBiosOpen.
*/
#define NELOG_AT_Exec_Err (ERRLOG_BASE + 78)
/*
* The AT command processor couldn't run %1.
*/
/*
* Cache Lazy Write and HPFS386 specific error log messages from 80 to 89
*/
#define NELOG_Lazy_Write_Err (ERRLOG_BASE + 80)
/*
* WARNING: Because of a lazy-write error, drive %1 now
* contains some corrupt data. The cache is stopped.
*/
#define NELOG_HotFix (ERRLOG_BASE + 81)
/*
* A defective sector on drive %1 has been replaced (hotfixed).
* No data was lost. You should run CHKDSK soon to restore full
* performance and replenish the volume's spare sector pool.
*
* The hotfix occurred while processing a remote request.
*/
#define NELOG_HardErr_From_Server (ERRLOG_BASE + 82)
/*
* A disk error occurred on the HPFS volume in drive %1.
* The error occurred while processing a remote request.
*/
#define NELOG_SrvNoResource (ERRLOG_BASE + 86)
/*
* The server ran out of the following resource: %1
*/
#define NELOG_BadSpareB (ERRLOG_BASE + 87)
/*
* A critical sector error was detected on drive %1. Back up the drive. No data was lost.
*/
#define NELOG_NoHotFix (ERRLOG_BASE + 88)
/*
* A bad sector on drive %1 cannot be fixed . Run CHKDSK /F on the drive.
*/
#define NELOG_BadVolume (ERRLOG_BASE + 89)
/*
* Drive %1 is experiencing severe disk errors. Back up the drive immediately.
*/
/*
* NETWKSTA.SYS specific error log messages from 90 to 99
*/
#define NELOG_NetWkSta_Internal_Error (ERRLOG_BASE + 90)
/*
* A NetWksta internal error has occurred:
* %1
*/
#define NELOG_NetWkSta_No_Resource (ERRLOG_BASE + 91)
/*
* The redirector is out of a resource: %1.
*/
#define NELOG_NetWkSta_SMB_Err (ERRLOG_BASE + 92)
/*
* An SMB error occurred on connection to %1.
* The SMB header is the data.
*/
#define NELOG_NetWkSta_VC_Err (ERRLOG_BASE + 93)
/*
* A virtual circuit error occurred on the session to %1.
* The NCB command and return code is the data.
*/
#define NELOG_NetWkSta_Stuck_VC_Err (ERRLOG_BASE + 94)
/*
* Hanging up a stuck session to %1.
*/
#define NELOG_NetWkSta_NCB_Err (ERRLOG_BASE + 95)
/*
* An NCB error occurred (%1).
* The NCB is the data.
*/
#define NELOG_NetWkSta_Write_Behind_Err (ERRLOG_BASE + 96)
/*
* A write operation to %1 failed.
* Data may have been lost.
*/
#define NELOG_NetWkSta_Reset_Err (ERRLOG_BASE + 97)
/*
* Reset of driver %1 failed to complete the NCB.
* The NCB is the data.
*/
#define NELOG_NetWkSta_Too_Many (ERRLOG_BASE + 98)
/*
* The amount of resource %1 requested was more
* than the maximum. The maximum amount was allocated.
*/
/*
* Sideband specific error log messages from 99 to 101
*/
#define NELOG_SB_Disabled (ERRLOG_BASE + 99)
/*
* Sideband transmissions have been disabled for the session
* with server %1.
*/
#define NELOG_SB_Reenabled (ERRLOG_BASE + 100)
/*
* Sideband transmissions have been re-enabled for the session
* with server %1.
*/
#define NELOG_SB_Not_Supported (ERRLOG_BASE + 101)
/*
* Sideband transmissions are not supported on %1 as defined in
* IBMLAN.INI.
*/
/*
* Spooler specific error log messages from 102 to 103
*/
#define NELOG_Srv_Thread_Failure (ERRLOG_BASE + 104)
/*
* The server could not create a thread.
* The THREADS parameter in CONFIG.SYS should be increased.
*/
#define NELOG_Srv_Close_Failure (ERRLOG_BASE + 105)
/*
* The server could not close %1.
* The file is probably corrupt.
*/
#define NELOG_ReplUserCurDir (ERRLOG_BASE + 106)
/*
*The replicator cannot update directory %1. It has tree integrity
* and is the current directory for some process.
*/
#define NELOG_ReplCannotMasterDir (ERRLOG_BASE + 107)
/*
*The server cannot export directory %1, to client %2.
* It is exported from another server.
*/
#define NELOG_ReplUpdateError (ERRLOG_BASE + 108)
/*
*The replication server could not update directory %2 from the source
*on %3 due to error %1.
*/
#define NELOG_ReplLostMaster (ERRLOG_BASE + 109)
/*
*Master %1 did not send an update notice for directory %2 at the expected
* time.
*/
#define NELOG_NetlogonAuthDCFail (ERRLOG_BASE + 110)
/*
*Failed to authenticate with %2, the domain controller for domain %1.
*/
#define NELOG_ReplLogonFailed (ERRLOG_BASE + 111)
/*
*The replicator attempted to log on at %3 as %2 and failed.
*/
#define NELOG_ReplNetErr (ERRLOG_BASE + 112)
/*
* Network error %1 occurred.
*/
#define NELOG_ReplMaxFiles (ERRLOG_BASE + 113)
/*
* Replicator limit for files in a directory has been exceeded.
*/
#define NELOG_ReplMaxTreeDepth (ERRLOG_BASE + 114)
/*
* Replicator limit for tree depth has been exceeded.
*/
#define NELOG_ReplBadMsg (ERRLOG_BASE + 115)
/*
* Unrecognized message received in mailslot.
*/
#define NELOG_ReplSysErr (ERRLOG_BASE + 116)
/*
* System error %1 occurred.
*/
#define NELOG_ReplUserLoged (ERRLOG_BASE + 117)
/*
* Cannot log on. User is currently logged on and argument TRYUSER
* is set to NO.
*/
#define NELOG_ReplBadImport (ERRLOG_BASE + 118)
/*
* IMPORT path %1 cannot be found.
*/
#define NELOG_ReplBadExport (ERRLOG_BASE + 119)
/*
* EXPORT path %1 cannot be found.
*/
#define NELOG_ReplSignalFileErr (ERRLOG_BASE + 120)
/*
* Replicator failed to update signal file in directory %2 due to
* %1 system error.
*/
#define NELOG_DiskFT (ERRLOG_BASE+121)
/*
* Disk Fault Tolerance Error
*
*%1
*/
#define NELOG_ReplAccessDenied (ERRLOG_BASE + 122)
/*
* Replicator could not access %2
* on %3 due to %1 system error.
*/
#define NELOG_NetlogonFailedPrimary (ERRLOG_BASE + 123)
/*
*The primary domain controller for domain %1 has apparently failed.
*/
#define NELOG_NetlogonPasswdSetFailed (ERRLOG_BASE + 124)
/*
* Error in changing this machine's password.
*/
#define NELOG_NetlogonTrackingError (ERRLOG_BASE + 125)
/*
*Error in updating the logon or logoff information for %1.
*/
#define NELOG_NetlogonSyncError (ERRLOG_BASE + 126)
/*
*Error in synchronizing with primary domain controller %1
*/
#define NELOG_BadReplIniParm (ERRLOG_BASE + 127)
/*
* The replicator detected the following invalid parameter in
* REPL.INI in subdirectory %1 : %2
*/
#define NELOG_ReplUpdateACL (ERRLOG_BASE + 128)
/*
* The following error occured while updating the access control
* profile for %1
*/
/*
* UPS service specific error log messages from 130 to 135
*/
#define NELOG_UPS_Shutdown (ERRLOG_BASE + 131)
/*
* The UPS service performed server shutdown.
*/
#define NELOG_UPS_CmdFileError (ERRLOG_BASE + 132)
/*
* The UPS service did not complete execution of the
* user specified shutdown command file.
*/
#define NELOG_UPS_CannotOpenDriver (ERRLOG_BASE+133)
/* The UPS driver could not be opened. The error code is
* the data.
*/
#define NELOG_UPS_LowBattery (ERRLOG_BASE + 134)
/*
* Low battery detected.
*/
/*
* HPFS386 'Out of Resource' messages from 135 to 143
*
*/
#define NELOG_R0SV_NO_RAM_WORKBUF (ERRLOG_BASE + 135)
/*
* RAM for 64Kb work buffer
*/
#define NELOG_R0SV_NO_RAM_HEAP (ERRLOG_BASE + 136)
/*
* RAM for heap expansion
*/
#define NELOG_R0SV_NO_RAM_HANDLE_TBL (ERRLOG_BASE + 137)
/*
* RAM for file handle table growth
*/
#define NELOG_R0SV_NO_CONNECTIONS (ERRLOG_BASE + 138)
/*
* LAN connections
*/
#define NELOG_R0SV_NO_OPEN_FILE_HANDLES (ERRLOG_BASE + 139)
/*
* Open file handles
*/
#define NELOG_R0SV_NO_SEARCH_HANDLES (ERRLOG_BASE + 140)
/*
* Search handles
*/
#define NELOG_R0SV_NO_FIND_HANDLES (ERRLOG_BASE + 141)
/*
* Find handles
*/
#define NELOG_R0SV_NO_WORKBUF (ERRLOG_BASE + 142)
/*
* 64Kb work buffers
*/
#define NELOG_R0SV_NO_HEAP (ERRLOG_BASE + 143)
/*
* Heap space
*/
#define NELOG_R0SV_NO_RAM_RABUF (ERRLOG_BASE + 144)
/*
* RAM for 64KB read-ahead buffer
*/
/*
* Multimedia, Isochronous LAN and Bandwidth Management from 145 to 149
*/
#define NELOG_BM_GenFailure (ERRLOG_BASE + 145)
/*
* A bandwidth management error occurred. The error is the data %1.
*/
#define NELOG_BM_SessFailure (ERRLOG_BASE +146)
/*
* A bandwidth management error occurred on the session to %1.
* The error is the data %2.
*/
#define NELOG_R0SV_NO_RABUF (ERRLOG_BASE + 147)
/*
* 64KB read-ahead buffers
*/
/*
* Remote boot server specific error log messages are from 150 to 164
*/
#define NELOG_Missing_Parameter (ERRLOG_BASE + 150)
/*
* Initialization failed because of an invalid or missing
* parameter in IBMLAN.INI: %1.
*/
#define NELOG_Invalid_Config_Line (ERRLOG_BASE + 151)
/*
* Initialization failed because of an invalid line in the
* configuration file %1. The invalid line is the data.
*/
#define NELOG_Invalid_Config_File (ERRLOG_BASE + 152)
/*
* Initialization failed because of an error in the configuration
* file %1.
*/
#define NELOG_File_Changed (ERRLOG_BASE + 153)
/*
* The file %1 has been changed after initialization.
* The boot block loading was temporarily terminated.
*/
#define NELOG_Files_Dont_Fit (ERRLOG_BASE + 154)
/*
* The files do not fit to the 'boot' block configuration
* file %1. Change BASE and ORG definitions or the order
* of the files.
*/
#define NELOG_Wrong_DLL_Version (ERRLOG_BASE + 155)
/*
* Initialization failed because the dynamic link
* library %1 returned a wrong version number.
*/
#define NELOG_Error_in_DLL (ERRLOG_BASE + 156)
/*
* There was an unrecoverable error in the dynamic
* link library of the service.
*/
#define NELOG_System_Error (ERRLOG_BASE + 157)
/*
* The system returned an unexpected error code.
* The error code is the data.
*/
#define NELOG_FT_ErrLog_Too_Large (ERRLOG_BASE + 158)
/*
* The fault-tolerance error log file, LANROOT\LOGS\FT.LOG
* is more than 64K.
*/
#define NELOG_FT_Update_In_Progress (ERRLOG_BASE + 159)
/*
* The fault-tolerance error-log file, LANROOT\LOGS\FT.LOG, had the
* update in progress bit set upon opening, which means that the
* system crashed while working on the errorlog.
*/
#define NELOG_DCDBChecksumError (ERRLOG_BASE+165)
/*
* A checksum error occurred when accessing the domain control
* database file %1.
*/
#define NELOG_DCDBIOError (ERRLOG_BASE+166)
/*
* An error occurred when reading from or writing to the
* domain control database file %1.
*/
#define NELOG_DCDBFileNotFound (ERRLOG_BASE+167)
/*
* The domain control database file %1 was not found.
*/
#define NELOG_DirAlerts_Threshold (ERRLOG_BASE+168)
/*
* The write operation was successful, but the size of directory %1
* crossed a threshold. The remaining space in the directory is %2 KB.
*
* (%1 is the directory name)
*/
#define NELOG_DirAlerts_DirFull (ERRLOG_BASE+169)
/*
* There was not enough space within directory %1 to perform a write
* operation.
*
* (%1 is the directory name)
*/
#define NELOG_DirAlerts_FatalError (ERRLOG_BASE+170)
/*
* The server encountered an error while initializing internal
* data structures. The server uses these structures to process
* alerts that pertain to directory limits. The server will not post
* alerts. The OS/2 return code is %1.
*/
#define NELOG_DirAlerts_IniFailure (ERRLOG_BASE+171)
/*
* The server encountered an error while initializing internal
* data structures. The server uses these structures to process
* alerts that pertain to directory limits. The server will now
* use its own default values. The INI file in use is %1. The
* return code is %2.
*/
#define NELOG_DirAlerts_NoAlerts (ERRLOG_BASE+172)
/*
* An error occurred as the server attempted to send a message
* concerning a directory limit. No message was sent. The OS/2
* return code is %1.
*/
#define NELOG_DlimNoHeap (ERRLOG_BASE+173)
/*
* The 386 HPFS server failed to enable directory limits on drive
* %1 because of insufficient heap space. The drive is still
* operational.
*/
#define NELOG_DlimDskErr (ERRLOG_BASE+174)
/*
* The 386 HPFS server failed to enable directory limits
* on drive %1 because of a disk error. The drive is still
* operational.
*/
#define NELOG_DirAlerts_BadIniParm (ERRLOG_BASE+175)
/*
* The server detected a parameterin the INI file %1 that is not
* valid. The parameter is: %2.
*/
#define NELOG_DirAlerts_BadIniSyntax (ERRLOG_BASE+176)
/*
* The server detected a parameter in the INI file %1 that does
* not have a valid syntax. The parameter is %2.
*/
#define NELOG_DirAlerts_BadDrive (ERRLOG_BASE+177)
/*
* The server detected and ignored a drive letter that is not valid
* within a parameter in the INI file %1. The parameter is %2.
*/
/****************************************************************
* Microsoft has created a generic error log entry for OEMs to use to
* log errors from OEM value added services. The code, which is the
* 2nd arg to NetErrorLogWrite, is 3299. This value is manifest in
* NET/H/ERRLOG.H as NELOG_OEM_Code. The text for error log entry
* NELOG_OEM_Code is: "%1 %2 %3 %4 %5 %6 %7 %8 %9.".
*
* Microsoft suggests that OEMs use the insertion strings as follows:
* %1: OEM System Name (e.g. 3+Open)
* %2: OEM Service Name (e.g. 3+Mail)
* %3: Severity level (e.g. error, warning, etc.)
* %4: OEM error log entry sub-identifier (e.g. error code #)
* %5 - % 9: Text.
*
* The call to NetErrorWrite must set nstrings = 9, and provide 9
* ASCIIZ strings. If the caller does not have 9 insertion strings,
* provide null strings for the empty insertion strings.
****************************************************************/
#define NELOG_OEM_Code (ERRLOG_BASE + 199)
/*
* %1 %2 %3 %4 %5 %6 %7 %8 %9.
*/
#pragma pack()
#endif /* NETERRLOG_INCLUDED */