OS/2 Shareware BBS: 10 Tools

home *** CD-ROM | disk | FTP | other *** search

/ OS/2 Shareware BBS: 10 Tools / 10-Tools.zip / VSCPPv2.zip / VACPP / IBMCPP / BIN / BETA / README < prev next >

Wrap

Text File | 1994-11-17 | 28KB | 609 lines

P2STRING USER'S GUIDE AND REFERENCE SECTION 1. INTRODUCTION ________________________ P2STRING is a test tool that exercises MMPM/2 via MCISENDSTRING and other APIs. It accepts scripts of string commands and tool directives to control the tests. Screen and file output of results are produced and overall test termination status is logged. SECTION 2. RUNNING P2STRING ____________________________ 2.1 INVOKING THE TOOL ______________________ P2STRING is invoked using the syntax shown below: p2string Script-file [-a]Output-file [-eError-file] [-d|D] [-E] ______________________________________________________ SCRIPT-FILE The name of the file containing the MMPM/2 commands and P2STRING directives to be executed. The format for the script file is described along with the script language syntax in the next section. [-a]OUTPUT-FILE The name of the file to hold the dialog of the test. This includes sent strings, logged strings, results, etc. By default, the output-file will contain only results from this test (eg. existing output will be lost). If the -a command switch is used, the output of this __ test will be appended to existing output. Thus, a number of tests can be logged to the same output file. -EERROR-FILE The name of the file to receive messages of strings that failed. -d Instructs the tool to automatically terminate at the con- clusion of the scripts. This switch should be used when test cases are run automatically. There is no change in the output. By default, the tool will display a message indicating the script has finished and require the user to terminate the test. -D Behaves the same as the -d option except that the script __ directives requiring user input are ignored. -E This switch causes the script to exit after the first error. By default, scripts will run to conclusion regardless of errors. -s The P2STRING session will stop after the first error, if there is one, and the dialog will remain on the screen. If there are no errors, the tool will automatically terminate at the conclusion of the script. NOTE: The command-line switches are case-sensitive. Sample command invocation lines: p2string cap_cdmc.001 cap_cdmc.l01 p2string cap_cdmc.001 -ap2string.OUT p2string cap_cdmc.001 cap_cdmc.l01 -d p2string cap_cdmc.001 -ap2string.OUT -d p2string cap_cdmc.001 cap_cdmc.l01 -d -eMDM.ERR p2string cap_cdmc.001 -aMDM.OUT -d -eMDM.ERR -E 2.2 OUTPUTS FROM THE TOOL __________________________ 1. Messages are displayed in the P2STRING window and logged to the output- file specified on the command line. Messages include all non-comment lines read from the script, eg. script directives, command strings, expected return values, expected and received notify messages, and status lines. 2. The test termination status is logged. 3. Errors and debugging statements are logged to the PMSTRING.LOG file, opened in the current execution directory. The amount of information is controled by debugging switches in the source files. Critical error statements are logged to this file unconditionally. There is no error logging to the STDERR and if errors are suspected, piping handle 2 into a file will not have any effect. PMSTRING.LOG file serves as STDERR. 2.3 DISPLAY OPTIONS ____________________ The tool recognizes two environment variables which allow the user to manipu- late the size and type of the fonts. To specify the font, use P2STRING_FONTFACE with a value of: SYSTEM, COURIER, TIMES, or HELVETICA (default). For example: To specify the font size, use P2STRING_FONTSIZE with possible values of: 8 (default), 10, 12, 14, or 18. For example, type the following from the command line before executing P2STRING: set P2STRING_FONTFACE=SYSTEM set P2STRING_FONTSIZE=10 NOTE: Either or both may be specified. SECTION 3. P2STRING SCRIPT SYNTAX __________________________________ Script files may contain several types of lines: o Comments o Tool Directives o MMPM/2 String Commands o Expected Return Strings o Expected Errors o Expected Notifies 3.1 COMMENTS ______________ Script comment lines must start with either ";" or "#" in the first column. These comment lines will not be displayed nor echoed into the output-file. If you wish a remark to appear in the output, use the @REM directive. 3.2 TOOL DIRECTIVES _____________________ Tool directives start with @ in the first column. These directives effect the execution and appearance of the output. The following classes of direc- tives are recognized: initialization and execution. 3.2.1 INITIALIZATION DIRECTIVES These are used to setup the script. As such, they must appear before any execution commands. o @PROCESSES="processes" "processes" = the number of processes the script will be dealing with. o @THREADS="threads" "threads"= the number of threads script will be dealing with. NOTE: @PROCESSES and @THREADS are mutually exclusive! NOTE: There is a limitation of 10 processes or threads per script! o @EVENTS={name[=0|1][,name[=0|1]]} Names of events are user defined with a maximum of 15 characters. Events may be set to 1 (for SET), or 0 (for CLEAR). If no initialization values is specified, the event is initialized to 0. For example: @EVENTS={trey=1,jennifer=1,test=0} 3.2.2 EXECUTION DIRECTIVES o @THREAD "number" Denotes that until the next @THREAD directive is encountered all of the script lines belong to thread "number". o @PROCESS "number" Denotes that until the next @PROCESS directive is encountered all of the script lines belong to process "number". NOTE: @THREAD and @PROCESS are mutually exclusive. P2STRING supports either multi-threaded or multi-process execution, but not both. o @SET_EVENT "name" 0|1 Used to set event "name" to either 1 (for SET), or 0 (for CLEAR). The event must have been declared via the @EVENTS directive. o @WAIT_EVENT "name" "[time-out]" Wait until event "name" is set to 1. The "time-out" is specified in milliseconds. If omitted, it defaults to 3 minutes. NOTE: Timing out on a @WAIT_EVENT is NOT considered a failure. o @WAIT_NOTIFY "number" "[time-out]" Wait for a specific expected MM_MCINOTIFY labled "number". Please see Section 4, "Multi-Thread Multi-Process Testing." on page 11 for more information. The "time-out" is specified in milliseconds. If omitted, it defaults to 3 minutes. If the associated mciSendString fails, the event is posted to prevent delays for notifications that are never going to be sent. NOTE: Timing out on a @WAIT_NOTIFY is NOT considered a failure. o @WAIT_PASSDEVICE "alias" "[time-out]" Wait until the device instance with an alias of "alias" gains use. This assumes that the alias names used within a script are unique. The maximum alias name length is 20 characters. The "time-out" is specified in milliseconds. If omitted, it defaults to 3 minutes. The tool assumes that a unique alias is specified on each open... string command. If unique aliases are not used, errors conditions of "Event already posted" may occur. o @REM "comment" Echos "comment" to the screen and the output log file. All other script comment lines (those starting with ";" or "#") are not transferred nor displayed. o @PAUSE "time-out" Pauses processing of the current thread or process in the input script file for the specified time. It does not stop the processing of the notifications or window functions. Other threads or processes are not effected by this directive. o @BREAK "[message]" Causes a message box to pop-up and stops the input script processing until user reponds. The optional message is displayed in the box and can be used as a prompt to the operator, eg. "replace the CD". o @CHECK "[message]" This directive will grade the success of the previous command based on the user's response. A pop-up will display the "message" and offer Yes and No button. The status is passed if user selects Yes, or failed if No is selected. For example: @BREAK The music will play for 5 secs. Get ready to time it. play cdaudio notify @PAUSE 5000 @CHECK Did it play? 3.3 MMPM/2 STRING COMMANDS ___________________________ All lines that don't fall into any of the other categories are interpreted as MMPM/2 string commands. These lines are passed to MDM via MCISENDSTRING after environment variable substitution. Any tokens in the string command line bracketed by question marks (eg. ?FOO?) is interpreted as an environment variable. The actual value of the environ- ment variable will be substituted into the string before it is passed to mciSendString. If the variable is not found, a warning is issued and the token is replaced with a null string. For example, assuming the environment string MMDATA is set to D:\DATA, then the command "open ?mmdata?\temp.wav alias a" is equivalent to "open d:\data\temp.wav alias a". 3.4 EXPECTED RETURN STRINGS ____________________________ Many MMPM/2 commands return strings. It is possible to check these strings against an expected value with an expected return string line. An expected return string line has the format: "=result". The "=" must be in column 1 and should have no trailing spaces. If an empty string is expected, nothing should follow the "=" (not even spaces). For example: status cdaudio ready wait =TRUE status cdaudio mode wait =stopped The expected result is always always interpreted as a string. This may produce some strange outputs for any commands that returns binary data. Where the return is a textual numerical value, it may be matched to a toler- ance range of +/- 10% using a tilde ("&tilde.") before the number. This is typically used when the exact value cannot be known. For example: set foo time format milliseconds wait play foo notify @PAUSE 1000 stop foo wait status foo position wait =&tilde.1000 Thus, the status command will be considered successful if the returned string is in the range 900-1100. 3.5 EXPECTED ERRORS ____________________ When an MMPM/2 string command is expected to fail with an error, use the the expected error line to specify the error expected. The expected error line has the format: "=!error". The "=!' must start in column 1. If any error is acceptable, then use the keyword "ERROR". If a specific error is expected, enter the exact error message after the "=!". For example: open sequencer alias mymidi wait load mymidi nofile.foo =!File not found. Be careful about extra blanks in the expected error and expected result lines. The case of the strings is unimportant, however the comparison will fail if the spacing or punctuation does not match exactly. 3.6 EXPECTED NOTIFIES ______________________ Many MMPM/2 string commands will cause notification messages to be sent to the tool. It is possible to verify that the proper notifications are received via an expected notify line. Each expected notification line will begin with a "+" in column 1. Three types of notification lines are pos- sible: command completion/error notifications, event notifications, and posi- tion change notifications. Any or all may be expected for a single MMPM/2 string command. These are detailed below: o +MM_MCINOTIFY notify-code message [#number] notify-code This is the notification message code, eg. MCI_NOTIFY_SUCCESSFUL. The spelling should be the same as the #defines in the os2me.h for the notify codes. message The MCI message that caused the notification, eg. MCI_PLAY. The spelling should be the same as the #defines in the os2me.h for the MCI messages. number The number is a unique lable used to associate @WAIT_NOTIFY directives with particular notifications. This number has nothing to do with the order in which strings are sent. The number must be unique and in the range 1-99. Please see Section 4, "Multi-Thread Multi- Process Testing." on page 11 for more information. o +MM_MCIPOSITIONCHANGE position %user-parameter #number position The expected MMTIME position of the first position change message. user-parameter The user parameter to be returned - this should be the same as specified as the RETURN value in SETPOSITIONADVICE send string. Note that return value should be an unique integer in the range of 1 - 99. number The number of position change messages expected. For more information, please see Section 6, "Limitations of MM_MCIPOSITIONCHANGE Verification" on page 15. o +MM_MCICUEPOINT position %user-parameter The parameters position and user-parameter are the same as above. NOTE: Other notification messages can not be compared because they do not allow for a UserParameter as part of the message which is essential for the tracking of related notifications. SECTION 4. MULTI-THREAD MULTI-PROCESS TESTING. _______________________________________________ Thread/Process testing is mutually exclusive. Thread/Process blocks can be layed out in any order within the script. The tool preprocesses the script and builds process command buffers. Each command is uniquely marked by an index which represents the command order in the entire script, not within its thread block. This key is used as the user parameter with notification callback handle. Use this key to track the return codes and notifications for a string command. Tool output represents the chronological order of exe- cution of the commands from all the threads and processes. There is a small chance of that order being disturbed by i/o scheduling of the threads, when they request the file logging at the same time. In case of multiprocessed testing, parent process performs all the preprocessing, initialization and status report. Children processes are spawned during the initialization but released (via a semaphore) only when everything is ready for the execution. Concurrent execution of the processes is not enforced by the tool, and if needed can be specified by the script writer. The parent is always ready before all the children are and therefore, it can post a script event on which all the children processes are waiting. The processes are closed at ExitListProcedure time. In case of threads, all the threads are concurrently executed. EVENTS have two states (1,0). 1 is used to mark that event has happened. 0 is used to reset the event. Waiting on the event means wait until somebody marks the event as happened (1). If the event is in state 1, setting it to state 0 is the only meaningful operation. WAIT would in this case return immediately. If event is in state 0, SET to 0 would also make no difference, but WAIT would wait until someone sets the event to 1. WAIT doesn't cause a change of the event state. @WAIT_NOTIFY number must match the index used in the MM_MCINOTIFY reference line. The WAIT_NOTIFY events are not reusable because there is no events that logically resets it. If you need a reusable event, opt for WAIT_EVENT. @WAIT_PASSDEVICE events are keyed by the alias names and these should be unique across the script. Remark: The assumed thread number from the start of the script body is 1. Maximum size of the display buffer is 500 lines per process. If the display requires more than this, the window will wrap-up and the first 500 lines can't be scrolled thru, once passed. Maximum number of wait events 100, pass device 10, notify events 100. The tool has a low-tolerance parsing. All of the string comparisons will fail if entire strings are not equal. It doesn't tolerate multiple blanks or tabs. Aliases used in @WAIT_PASSDEVICE direc- tives should match cases with real instance aliases. Maximum string line should not exceed 170 characters. The tool will exit if this condition fails. The tool doesn't allow multiple copies being executed at the same time. The size of the stack for each thread is 64K. The size of the message queues for all window threads is 100. P2STRING tool consists of an executable (P2STRING.EXE) and a DLL (P2S_DLL.DLL). SECTION 5. PROCESSING LOGIC _____________________________ A string command line can be followed by zero to one return value lines, or zero to three notification lines. Note that this is an exclusive OR, meaning that specifying both expected return value and expected notification is not going to give reliable results due to the fact that returned buffer doesn't become valid prior to the end of the notify message. Also in case of notify flags, return values are in the PROCEDURAL INTERFACE format rather than in the STRING INTERFACE format. The MDM will not be able to convert return values to strings for commands executed with the notify flag because MCI drivers will be sending their notify messages directly to the application. Status of each command is determined in two stages. First stage is at string execution. If mciSendString returns an error and there was no =!ERROR refer- ence line in the script following the command string line, command is consid- ered as failed. If a return value was found after mciSendString is executed, the tool will check for expected return and perform comparison of the two. It they do not match, the command is considered as failed. In case of an error that is not in the range understood by the mciGetErrorString API, the command is considered failed even if the !ERROR was encountered. Second stage of the comparison is after a notification is received and after all the commands were issued. If a notification was received and it success- fully compared to the expected notification line, the command is considered successful. If there was no reference notification line, status of the command will not be assigned, unless notify-error was returned. After all the scripts are processed, expected reference notifications will be used to determine if all the notifications were received. The commands that did not receive a notify and had an expected notification line of the type will be marked as failed. Note that command strings are not examined for presence of "notify" flag and it is the writer's responsibility to create an expected notify line if it is of importance. In case of expected notify_successful messages, all codes other than notify_error are considered valid. This includes notify_successful, notify_aborted and notify_superceded. If any other notify code was specified as expected, and exact match will be checked for. If NOTIFY_ERROR is expected, all errors in the range are verified as passed. There is no facility for verification of an exact error code returned in the notification. SECTION 6. LIMITATIONS OF MM_MCIPOSITIONCHANGE VERIFICATION ____________________________________________________________ Verification of MM_MCIPOSITIONCHANGE messages is limited in the P2STRING tool. It requires usage of the "RETURN UserParameter" options in the respec- tive strings. It also doesn't provide for timing start point (eg. playing has started or similar). The tool can only count the number of messages received for a specific UserParameter (used as a key) and check if subsequent messages have positions approximate the given expected position interval. The script writer has the responsibility to premeditate how many positionadvice messages are expected, taken into account the duration of playing, time format and start position of the play/record. The reference POSITION given in the expected notification line must be in MMTIME (since the MM_MCI.. message returns the same format). If expected number of messages parameter is omitted, the tool will not verify the number, just the position interval. In case of scripts where play/seek/record are used to cover non- monotonic ranges, the tool may report failures on position-advises because it expects each positionadvise to be in the next position interval from the pre- vious message. If the script makes a jump to a position that doesn't conform to this, the status will be logged as failed. For example: setpositionadvise SomeDevice every 10000 on return 5 +MM_MCIPOSITIONCHANGE 10000 %5 play SomeDevice from 35000 to 55000 notify (will produce 3 positionchange messages) seek SomeDevice to 30000 wait play SomeDevice notify ( will produce a number of messages starting at 30000) PositionChange messages are logged as failed, because of the lapse in posi- tion interval. A way to handle this situation is to disable the positionchange before an explicit position jump is made and enable the same positionadvise with a dif- ferent user parameter. For Example: setpositionadvise SomeDevice every 10000 on return 5 +MM_MCIPOSITIONCHANGE 10000 %5 play SomeDevice from 35000 to 55000 notify (will produce 3 positionchange messages) setpositionadvise SomeDevice every 10000 off seek SomeDevice to 30000 wait setpositionadvise SomeDevice every 10000 on return 6 +MM_MCIPOSITIONCHANGE 10000 %6 play SomeDevice notify ( will produce a number of messages starting at 30000) SECTION 7. ADDITIONAL CONSIDERATIONS _____________________________________ P2STRING allows for variable number of lines for display in its window. Regular comment lines (header lines) are not displayed nor written to the output file. If input file can't be opened, the execution is terminated. The tool will attempt to allocate memory for its display and internal buffers and will not proceed if it fails to obtain all of its memory at the very beginning of its execution. It allocates 3 notification buffers, 2 status buffers, 1 return value buffer, n command buffers (threads/processes), and a display buffer whose size is estimated based on the number of lines in the first input file. In case of a script with bigger display requirements than what was estimated and allocated, the display screen may wrap up and lose the first half of the screen (scrolling back will stop at the line which had to wrap up). However, this does not disrupt the logging to the output file and should not be a major inconvenience. In cases where this is unacceptable, a work-around is to add more comment lines to the main script. The tool esti- mates that each line of input takes 5 lines of output. The tool is a multithreaded program and its window can be manipulated even if a "wait" string command is in progress. If the window is closed, the string execution thread is immediately killed and entire process terminated. The termination closes all of the open files and destroys both message queues and performs WinTerminate before it issues DosExit. In case of multi-threaded execution, the main script processing thread spawns n (@THREADS=n) threads in suspended mode during the initialization and resumes them at the time of exe- cution. That means that during the execution there are n+2 P2STRING threads. In case of multi-process execution, the tool prepares all the buffers and spawns (n-1) processes (@PROCESSES=n). The processes are signaled to execute at the end of pre-processing. The parent process executes its buffer and then waits for all of the children. At the time of execution, there are n processes with 2 threads each. Each process logs to its own display window, but all processes log to the same output and debug files. APPENDIX A. SAMPLE SCRIPT __________________________ A sample script file, called sample.scr, has been placed in this directory for your use. Please refer to that file for examples on the use of P2STRING syntax and directives, etc. APPENDIX B. SAMPLE OUTPUT ___________________________ The sample script file, sample.scr, creates an output file called sample.out. This file has also been placed in this directory for your use. Please refer to sample.out for an example of the type of output created by P2STRING. APPENDIX C. A NOTE ABOUT ALIASES _________________________________ The tool preprocess the script and creates list of aliases that are tracked. For every received gaining or losing use message, the tool determines if the Device ID corresponds to one of the tracked aliases and posts/reset the appropriate event. If an alias is re-used, the tool will handle the change in the Device ID's. However, in case where the same alias is used twice and happened to be given the same Device ID by the MDM, the losing use message is the only way to clear the event. So if no losing use message was received for the alias, the tool can't detect that alias now addresses a fresh instance and may return "Event already posted". The recommendation is to use unique aliases for the scripts that are taking advantage of this directive. NOTE: use a unique alias for every OPEN command.!!!!