home *** CD-ROM | disk | FTP | other *** search
/ OS/2 Shareware BBS: 2 BBS / 02-BBS.zip / v611docs.zip / VMAIN611.ZIP / VC2-AD < prev    next >
Text File  |  1993-10-08  |  4KB  |  98 lines

  1.                                            VBBS 6.11 Documentation -- 2-D-1
  2.  
  3.  
  4.          ╔════════════════════════════════════════════════════════════════╗
  5.          ║ CHAPTER TWO ANNEX D    2. CHANNEL CONFIGURATION                ║
  6.          ╚════════════════════════════════════════════════════════════════╝
  7.  
  8.                 In this section of VCONFIG, you can configure the multi-
  9.          user communications aspects of VBBS and define the correct modem
  10.          port for single-line installations.
  11.  
  12.          ╔═╗    If you have only one line, you won't spend much time in
  13.          ╚═╝    this section of VCONFIG.  You only need to tell VBBS which
  14.                 COM port to use for Channel 1.
  15.  
  16.                 When you bring up the CHANNEL configuration screen, you
  17.          will see a long list of channel numbers and their current charac-
  18.          teristics.  To edit a particular line, use the arrow keys to move
  19.          the highlight bar to the channel you want to edit, then press
  20.          [Enter].  This will bring up a second screen with the following
  21.          information:
  22.  
  23.          1) Serial Port
  24.             ═══════════
  25.             This setting can range from COM1 to COM8 for communica-
  26.             tions ports.  Whichever COM port you specify is what this
  27.             channel will use.
  28.  
  29.             If set to LOCAL, then no COM port at all is used for this
  30.             channel.  By using the LOCAL setting, VBBS could be used
  31.             as the interoffice mail system on a LAN.
  32.  
  33.          2) Base Address (Hex)
  34.          3) IRQ (Hex)
  35.             ══════════════════
  36.             For unique addressing, you may configure the port base ad-
  37.             dress and IRQ directly.  Both entries should be entered in
  38.             hexadecimal format.
  39.  
  40.          4) Baud Rate
  41.             ═════════
  42.             This field sets the baud rate of the COM port.
  43.  
  44.          5) Init String
  45.             ═══════════
  46.             The modem commands needed to properly initialize your mo-
  47.             dem for VBBS go here.  For initialization strings for sev-
  48.             eral of the more popular modems, see MODEM.DOC.
  49.  
  50.          ╔═╗    There are several message bases on VirtualNET from which
  51.          ╚═╝    you can get help in "tweaking" your init string to fit
  52.                 your exact setup.  These include the "VBBS Modem
  53.                 Technical Support Sub" and "Modem Mania". Run VAREA
  54.                 to see the latest subslist entries.
  55.  
  56.          6) Locked Baud Rate
  57.             ════════════════
  58.             If you are using a standard 2400-baud modem without error
  59.  
  60.                                            VBBS 6.11 Documentation -- 2-D-2
  61.  
  62.  
  63.             correction, this should be set to NO; if you are using a
  64.             high-speed modem, or a modem with error correction, this
  65.             should be set to YES.
  66.  
  67.          7) Hardware (RTS/CTS) Handshake
  68.             ════════════════════════════
  69.             If you are using a standard 2400-baud modem without error
  70.             correction, this should be set to NO; if you are using a
  71.             high-speed modem, or a modem with error correction, this
  72.             should be set to YES.
  73.  
  74.             Yes, this says the very same thing as 6); I had to check
  75.             the original documentation myself to make sure I hadn't
  76.             made a typo!  :-)
  77.  
  78.          8) Minimum Baud Rate Allowed
  79.             ═════════════════════════
  80.             This feature can be used to "lock out" users using slower
  81.             modems, should you desire to do so.  This can be config-
  82.             ured independently for each active channel.  For example,
  83.             a sysop running a single-channel installation might wish
  84.             to lock out 300-baud callers; she would enter a value of
  85.             1200 in this field.  A value of 0 in this field disables
  86.             the minimum-baud-rate feature.
  87.  
  88.             A text file called TOOSLOW.TXT (found in your \TXT direc-
  89.             tory) is displayed to the user immediately upon connect
  90.             if his modem is at a disallowed speed.  This ASCII text
  91.             file may, of course, be customized to suit your needs.
  92.  
  93.          ╔═╗    If you're running more than one channel, one of which
  94.          ╚═╝    uses a high-speed modem, you may wish to use the minimum-
  95.                 baud-rate feature to reserve the high-speed channel for
  96.                 the exclusive use of high-speed callers.
  97.  
  98.