uae.notfound: Could not find %s. That's not too good, actually that means we can't start it!
uae.notstart: UAE did not want to stay. Perhaps there is not enough memory free.
err.header: Wrong header (must be "# UAE Setup"). This is not an UAE Setup file.
err.norom: The ROM image %s doesn't exist.
err.nodisk: The File %s is not a disk image.
err.nodir: The Object %s is not a directory.
err.hfuaerunning: You can't create a hardfile when UAE is already running.
err.hfthere: Hardfile is already existing. Owerwrite existing Hardfile?
err.hfwrong: Something went wrong when creating new Hardfile.
err.uaedied: UAE seems to have died neanwhile.
iconbar.*: This is the UAE icon.|MClick MENU to open the main menu.|MClick SELECT to start UAE or to switch back to UAE.|MReturn from UAE by pressing F12.
Setup.*: This is the UAE setup window. Here you can alter the configuration of UAE.|MNote that you will need to reset UAE for the changes to take effect.
Setup.1: <Setup.*>|MClick to alter the screen configuartion.
Setup.2: <Setup.*>|MClick to alter the sound configuartion.
Setup.3: <Setup.*>|MClick to change the joystick keymap or the devices in the joystick ports.
Setup.4: <Setup.*>|MClick to alter the memory configuartion.
Setup.5: <Setup.*>|MClick to change the disks.
Setup.6: <Setup.*>|MClick to alter the mounted directories or hardfile options.
Setup.7: <Setup.*>|MClick to alter some miscellanous configuration.
Setup.8: <Setup.*>|MClick at Cancel to forget your changes.
Setup.9: <Setup.*>|MClick at Save to save the actual setup to a file.
Setup.10: <Setup.*>|MClick at OK to take over the setup.
Screen.*: This ist the UAE screen setup. UAE fails if the mode is not defined in your MDF!
Screen.2: <Screen.*>|MClick at the arrows to alter screen width. Click ADJUST to change faster.
Screen.3: <Screen.2>
Screen.4: <Screen.2>
Screen.5: <Screen.2>
Screen.6: <Screen.*>|MAutocentering: No means no centering, Yes means center always.|MClever tries to avoid recentering if it is not necessary.
Screen.7: <Screen.6>
Screen.8: <Screen.6>
Screen.9: <Screen.6>
Screen.10: <Screen.*>|MTick Half Width if you want to use a LoRes mode like 320*256 mode to drop every second pixel in a line.
Screen.13: <Screen.*>|MClick at the arrows to alter screen height. Click ADJUST to change faster.
Screen.14: <Screen.13>
Screen.15: <Screen.13>
Screen.16: <Screen.13>
Screen.17: <Screen.6>
Screen.18: <Screen.6>
Screen.19: <Screen.6>
Screen.20: <Screen.6>
Screen.21: <Screen.*>|MTick if you use a HiRes mode like 800*600 to draw each line twice.
Screen.22: <Screen.*>|MTick if you use a HiRes mode like 800*600 and want to scale the screen height exactly and not twice.
Screen.24: <Screen.*>|MClick at the menu icon to open the colour menu.
Screen.25: <Screen.24>
Screen.26: <Screen.24>
Screen.27: <Screen.*>|MBy clicking at the arrows you can adjust after how much Amiga frames UAE will do a screen refresh.
Screen.28: <Screen.27>
Screen.29: <Screen.27>
Screen.30: <Screen.27>
Sound.*: This is the UAE sound setup.
Sound.1: <Sound.*>|MTick if you want to use Sound. But note that some programs (for instance Turrican II) wo'nt run then due to an undiscovered bug. Also the emulator will run somewhat slower.
Sound.2: <Sound.*>|MUsually you will set this to 2.
Sound.3: <Sound.2>
Sound.4: <Sound.2>
Sound.5: <Sound.2>
Sound.6: <Sound.*>|MClick at the arrows to adjust the sampling frequency. Click ADJUST to adjust faster.
Sound.7: <Sound.6>
Sound.8: <Sound.6>
Sound.9: <Sound.6>
Sound.10: <Sound.*>|MClick at the arrows to adjust the size of the sample buffer. Click ADJUST to adjust faster.
Sound.11: <Sound.10>
Sound.12: <Sound.10>
Sound.13: <Sound.10>
Joystick.*: This is the UAE joystick setup.|MSelect which device you want in which joystick port. Currently no real joysticks are supported, only keyboard emulation. And don't forget the mouse if you need one!
Memory.*: This is the UAE memory setup.
Memory.1: <Memory.0>|MSelect how many slow memory you want. But on the emulator there is no speed difference between fast and slow memory.
Memory.2: <Memory.1>
Memory.3: <Memory.1>
Memory.4: <Memory.1>
Memory.5: <Memory.0>|MSelect how many chip memory you want. You will need at least 512K to be able to watch something on the screen!
Memory.6: <Memory.5>
Memory.7: <Memory.5>
Memory.8: <Memory.5>
Memory.9: <Memory.0>|MSelect how many fast memory you want. But on the emulator there is no speed difference between fast and slow memory.
Memory.10: <Memory.9>
Memory.11: <Memory.9>
Memory.12: <Memory.9>
Disks.*: This is the UAE disk setup.|MDrag your ADF files onto the corresponding icon of the drive.|MClick at the Eject icon to eject a disk.|MPut the disk you want to boot from into drive 0.
Mount.*: This is the UAE mounted devices setup.
Mount.2: <Mount.*>|MThat is the location of the hardfile. A hardfile is a kind of harddisk image.|MYou can for instance install your Workbench onto it.
Mount.4: <Mount.*>|MHere you can change the size of the hardfile you want to create.
Mount.5: <Mount.*>|MClick at the Create icon if you want to create a new hardfile.
Mount.7: <Mount.*>|MDrag a RiscOS directory you want to access from inside UAE onto this icon or type in the name.|M(I hope installing the Workbench to such a directory works one day...)
Mount.9: <Mount.*>|MType in the Amiga device name for your mounted directory.
Mount.10: <Mount.*>|MTick this if you want to mount a directory as a read-only device, e.g. for CD-Roms.
Mount.12: <Mount.7>
Mount.14: <Mount.9>
Mount.15: <Mount.10>
Mount.17: <Mount.7>
Mount.19: <Mount.9>
Mount.20: <Mount.10>
Misc.*: This is the UAE miscellaneous setup.
Misc.2: <Misc.*>|MDrag you Kickstart ROM image onto that icon or type in the name.
Misc.3: <Misc.*>|MUsually you will set this to 2.
Misc.4: <Misc.3>
Misc.5: <Misc.3>
Misc.6: <Misc.3>
Misc.7: <Misc.*>|MTicking this enables a faster but not 100% correct Blitter emulation.
Misc.8: <Misc.*>|MTicking this causes Blitter actions to finish immediately and does not emulate that also the blitter needs time. It might be faster but some programs may not like it.
Misc.9: <Misc.*>|MTicking this disables all expansion units as there are: hardfile, mounted directories, fast memory, slow memory.
Change.*: Here you can change some parameters of UAE while it is running so that they take immediately effect.
Change.1: <Change.0>|MClick to change the devices in the joystick ports or the joystick keymap.
Change.2: <Change.0>|MClick to change the disks.
Change.3: <Change.0>|MClick at Cancel to forget your changes.
Change.4: <Change.0>|MClick at OK to take over your changes.
Info.*: Contact the authors via email:|MBernd Schmidt: crux@pool.informatik.rwth-aachen.de|MPeter Teichmann: sol@space.wh1.tu-dresden.de|MGet the newest version: fttp://www.wh1.tu-dresden.de/~sol/acorn.shtml
