# The following lines refer to system messages and should not be changed at
# all. This is because, some are used in icons which have a maximum space
# defined, and if a message is too long, you may get an address exception
# or Abort on data transfer error.
Error1:Net Reader cannot create the reply file correctly. Before making any replies, you should check the reply file.
Error2:Net Reader has become corrupted. Please re-install from your original copy.
Error3:Usenet message file too long to create menu structure.
Error4:Can't access reply file. Does it exist?
Error5:That doesn't appear to be a valid message file. Check the header information to see if it follows the conventions given in the manual.
Error6:Menu block overflows buffer.
Error7:Indirected data overflows menu block allocation.
Error8:There are no stored
Error9:You are not reading a message.
Error10:Can't find start of message header.
Error11:Negative number of lines detected in message.
Error12:There are no messages loaded in order to search.
Error13:That's no text file!
Error14:You are already writing a message.
Error15:You must enter a subject line.
Error16:Unknown savetype received.
Error17:Unknown filetype when attempting wimpsave.
Error18:Sorry. This feature is not implemented in this version.
Error19:Invalid block terminators.
Error20:Sorry. There are no more references to you.
Error21:The input file has closed while multitasking loading is in progress.
Error22:Attempt to access a closed or non-existent file.
Error23:Click OK to continue.
Error24:Click OK to continue or click CANCEL to Quit application.
Error25:NetReader has suffered the same error more than three times. To avoid the possibility of a fatal recursive error, NetReader has now decided to give you the option to Quit.
Error26:Click OK to Quit application.
Error27:Sorry. The source file is archived, yet SparkFS is not loaded.
Error28:You can't add blank Newsgroup items.
Error29:Newsmenu block overflows buffer.
Error30:Newsmenu indirected data overflows memory allocation.
Error31:Peoplemenu block overflows buffer.
Error32:Peoplemenu indirected data overflows memory allocation.
Error33:The current message senders name is already in your skipfile.
Error34:The whole message file must be loaded before you can goto a message by subject reference.
Error35:Sorry. !NetReader Can't extract an Email address from message header on this message.
Error36:Mail lists block overflows buffer.
Error37:Mail lists indirected data overflows memory allocation.
Error38:No mail list entered.
Error39:Sorry. There is no MailList with that name. Have you created one?
Error40:Sorry. !NetReader can't find a full email address for that name in your address book.
Error41:That message file is empty. Please try another one!
Error42:That option doesn't work if you're using Ant message files.
Error43:Sorry. !NetReader cannot locate any Ant resources.
Error44:NetReader is unable to read it's global choices file.
Error45:NetReader has no user directory filepath setup. Please ensure one is set up before logging on as a user.
Error46:Your user directory filepath is not set to a directory. Please check it now.
Error47:You already have a message file open. Close the existing file before attempting to load a new one.
Error48:Can't re-create Ant INS 'INBOX' file after purging.
Error49:NetReader has no source filename set for this mode. Please check your choices.
Error50:You have entered an incorrect password. Please try again.
Error51:No mail type specified. Please drag the file over one of the mode selector icons.
Error52:You haven't supplied a username.
Error53:The password and confirmation you have entered do not match. Please re-enter.
Error54:That choice of password is too short. Please enter a longer one.
Error55:That username already exists. Please choose a new one.
Error56:Sorry. That is an invalid user ID.
Error57:Sorry. Your 30 day evaluation period is up. In order to continue using !NetReader, please register your copy.
Error58:NetReader cannot find the source message file you want to load. Please double check your settings and try again.
Error59:That user doesn't exist. Please check whose password you are trying to change.
Error60:You need to register your copy of NetReader before you can enter or change the Global password.
Error61:NetReader can't find that address in your address book. Check that you have entered the full name correctly.
Error62:NetReader has no full name in order to delete an entry from the address book.
Error63:You can't add mailing lists to the address book.
Error64:There is no local user with that name. Please check the email address.
Error65:Sorry. That person has not setup their inbox correctly. They cannot receive new email.
Warn1:About to jump to last message.
Warn2:About to jump to first message.
Warn3:To save, drag the file icon to a directory display.
Warn4:About to abort replying to this message.
Warn5:No matches found.
Warn6:Click Delete to delete all the tagged files
Warn7:Confirm importing file into reply.
Warn8:This message is already stored.
Warn9:To save, drag the directory icon to a directory display.
Warn10:Warning: Message truncated at line
Warn11:No lines have been marked for quoting.
Warn12:that have been read, else click Cancel.
Warn13:Are you sure you want to close the
Warn14:currently loaded message file?
Warn15:Are you sure you want to Quit?
Warn16:There are no replies to this message.
Warn17:Are you sure you want to
Warn18:delete this email address?
Warn20:Quick print the current message?
Warn21:Quick print your current reply?
Prom1:Click OK to continue, or Cancel to stop.
Prom2:Click OK to delete, or Cancel to continue.
Prom3:Click OK to import data, or Cancel not to.
Prom4:OK
Prom5:Abort
Prom6:Quit
Prom7:Cancel
Prom8:Delete
Prom9:Import
Prom10:Enter the range of messages you wish to
Prom11:mark as tagged for deletion:-
Prom12:unmark as tagged for deletion:-
Prom13:mark as Read:-
Prom14:mark as Unread:-
Prom15:Click Abort to abandon reply, or click Cancel
Prom16:Close
Prom22:Leave alone
Prom25:Continue
Scan0:#! rnews
Scan1:Article
Scan2:From
Scan3:Date
Scan4:Subject
Scan5:Lines
Scan6:Newsgroups
Scan7:Message-ID
Scan8:References
Scan9:mail to
Scan10:Path
Scan11:NNTP-Posting-Host
Scan12:Memo
Scan13:NetReader
Scan14:Cc
Scan15:Bcc
Scan16:Followup-To
Scan17:Content-Type: TEXT/PLAIN; CHARSET=US-ASCII
Scan18:X-Organisation
Scan19:X-Mailer
Scan20:Reply-To
Scan21:Received
Scan22:X-
Scan23:To
Scan24:Return-path
Scan25:MIME-Version
Scan26:Content-Transfer-Encoding
Ant1:MAIL FROM:
Ant2:RCPT TO:
Ant3:DATA
Misc1:Message Index: No./Subject/Sender/Length
Misc2:Private Email
Misc3:messages.
Misc4:<Message skipped>
Misc5:Reply to message #
Misc6:Select a mail list...
Misc7:Newsgroup:
Misc8:Follow-up:
Misc9:List:
Misc10:Unknown recipient
Misc11:<No subject>
NoFile1:WARNING: The Usenet reply file can't be created. Check 'Choices' settings.
NoFile2:WARNING: The Private reply file can't be created. Check 'Choices' settings.
NoFile3:WARNING: !NetReader has been unable to create/locate either the Usenet or the Private reply files. Please check the 'Choices' settings.
# The information below is for Acorn's interactive help application.
W-2.0:This is Paul Vigay's NetReader icon. \Slogin as a local user
W1.1:The name of this application
W1.2:The purpose of this application
W1.3:Paul Vigay is the author of NetReader
W1.4:The version of this application
W1.10:The registered user of this copy of NetReader
W1.12:The type of licence this copy of NetReader is registered as
W3.0:Drag the icon to a directory display (or another application) to export the data
W3.1:Enter the filename for the data here. Not needed, if exporting to another application
W3.2:\Ssave the data, if a full pathname is entered in the box on the left
W4.0/W4.1/W4.2:NetReader is displaying a warning. You need to decide what you want to do
W4.4:\Scancel the action
W4.3:\Sconfirm and carry out the action
W5.1:This is the name of the newsgroup the current message was posted to. If this is a private email, NetReader will tell you so
W5.10:This is the subject of the message
W5.9:This tells you the number of the message you are currently reading, and how many messages there are in total in the file
W5.17:This LED will light up if there is a reference to yourself within the current message
W5.16:A question mark will appear here if the current message looks like it was sent with an incorrect email address. If so, it could be anonymous or the sender hadn't set up their email software correctly
W5.2:Whether the message was from a single user or a mailing list
W5.3:The sender of the message
W5.6:\Sview the previous message
W5.7:\Sview the next message
W5.11:\Sgo to a specific message within the current file
W5.5:The date the message was sent
W5.18:A small graphical display of how far you are through the message file
W5.8:\Sreply to the current message
W5.21:\Sopen your address book
W5.19/W5.20:\Stoggle whether or not the killfile is active. If active, any email addresses in your killfile will be skipped over when moving forwards and backwards
W5.13/W5.14:\Stoggle whether or not the current message will be stored within your stored messages file
W5.15:\Sdetermine whether or not the current message will be deleted when you close the file. If the bin is dark, the message will be deleted. If it is greyed out the message will be left intact
W6.3:This is the full name of the person
W6.4:This is an abbreviated 'nickname' of the person
W6.5:This is the full email address of the person
W6.9:\Sdelete the current person from your address book
W6.8:\Sclose your address book
W6.7:\Ssave the current name permanently in your address book
W6.6:\Ssee a menu of all the names in your address book
W7.0:Drag this icon to a filer window to create a directory full of the exploded messages
W7.5/W7.6:\Stoggle whether or not the message file will be purged (deleted) after exploding it
W7.3:This is the name of the directory to explode the messages into
W7.4:If the icon to the left contains a full pathname, click here to start the exploding process. If not, drag the icon above into a suitable filer window
W8.0/W1.1:The type of utility currently active
W8.3:Set the start message here
W8.5:Set the end message here
W8.6:\Sactivate the utility
W9.3:The filename of the file being loaded
W9.5:The size of the file being loaded
W9.7:The date of the file being loaded
W9.1:The amount loaded so far of the file being loaded
W10.0:\Sview the message that the current message is a reply to
W10.1:\Ssee the first reply to this message
W10.2:\Sto back to the message you were last looking at
W11.11:\Sto quit NetReader
W11.10:\Sregister this copy of NetReader now
W11.9:\Scontinue using this unregistered copy of NetReader
W12.2:Enter the user name here
W12.3:Enter the users password here
W12.5:\Sstop trying to login
W12.6:\Slogin as the person listed above
W12.7:\Schange your password (you need to enter the existing password first)
W12.4:\Sselect a user name from all those currently known to NetReader
W13.2:\Sedit the global choices
W13.1:\Sedit the personal choices such as email address etc
W13.7:\Sedit the filenames of the source and destinations files etc
W13.0:\Sedit the various colours used in the message and reply windows
W13.3:\Sedit the miscellaenous choices
W13.6:\Ssave all the choices and settings back to disc for permanent changes
W13.4:\Scancel any changes and reload the previous choices
W13.5:\Sactivate the current choices but don't save them back to disc. ie, just use for this session only
W14.3:The email mode being edited below
W14.4:\Sselect the required email mode
W14.0:Enter your full email address here
W14.10:Enter a string of characters in here that NetReader will use to scan each message to see if there are any references to you. If so, they will be highlighted in the message text
W14.5:\Sedit your signature for this email mode
W14.7/W14.8:\Stoggle whether or not a random fortune cookie will be added to the end of your signature each time you sign a message
W14.9:\Sclose this choices window
W15.4:The number of spaces each tab character is expanded by
W15.5:The width of the window you type your reply in
W15.7:\Stoggle between ADFS (10 character) and DOS (8 character) filenames to use for exploding messages
W15.2/W15.6:\Stoggle whether or not NetReader will multi-task when loading message files
W15.9/W15.10:\Stoggle whether or not NetReader will automatically cancel the storing of messages as you read each message in the inbox
W15.11/W15.12:\Stoggle through short, long or full headers. This will determine the amount of header information that NetReader will save when you export or explode messages
W15.17:\Sdecrease the expiry count
W15.16:\Sincrease the expiry count
W15.18/W15.15:The number of days (or months) that NetReader will use to determine whether or not read messages should be binned
W15.14/W15.13:\Sselect whether NetReader should expire messages after days, months or years
W15.8:\Sclose this choices window
W16.3:The email mode being edited below
W16.4:\Sselect the required email mode
W16.10:Enter the name of the source file for messages of this email mode here
W16.0:Enter the name of the file to save any replies into for this email mode here
W16.6/W16.7:\Sdetermine whether or not NetReader will keep a copy of all your replies within your user directory
W16.5:\Sclose this choices window
W17.6:\Sselect the colour for the text in the main message window
W17.8:\Sselect the colour for the background in the main message window
W17.32:\Sselect the colour to mark any lines for quoting in the main message window
W17.34:\Sselect the colour to highlight any web URL's or email addresses in the main message window
W17.10:\Sselect the colour to highlight any lines containing text that matches the self reference
W17.12:\Sselect the colour to highlight any single quoted text
W17.22:\Sselect the colour to highlight any double quoted text
W17.16:\Sselect the colour of the text in the reply window
W17.18:\Sselect the colour of the background in the reply window
W17.20:\Sselect the colour of any single quoted text in the reply window
W17.13:\Sselect the colour of any double quoted text in the reply window
W17.26:\Sselect the colour of un-read messages in the message index window
W17.28:\Sselect the colour of read messages in the message index window
W17.30:\Sselect the background colour of the message index window
W17.1:\Sclose this choices window
W18.0:Enter the global choices password here before you can edit the global choices or create new users
W18.3:Enter the directory path of the directory that NetReader will look in for all the user directories
W18.9:Enter the local domain name here. For example, if someone enters an email address with no @ symbol, NetReader will automatically send it to the domain listed here. Enter "localsite" to re-direct to local users
W18.6:Ths displays the default user name that is entered in the box when you activate NetReader
W18.7:\Sdisplay a menu containing all the users known to NetReader
W18.5:\Sclose this choices window
W19.0/W19.1/W19.2/W19.3/W19.4:\Sload the required message file
W19.6/W19.7/W19.8/W19.9/W19.10:\Sload stored messages for the required email mode
W19.11/W19.12/W19.13/W19.14/W19.15:\Sload your sent messages for the required email mode
W19.16/W13.9/W12.8:\Sload the interactive help program
W19.5:\Slog out and leave NetReader ready for the next person to login to
W20.3:Enter the username here
W20.4:Enter the required password here
W20.5:Enter the required password again here, to confirm it
W20.6:Cancel this operation and close the window
W20.7:Carry out this operation
W21.2:Enter the user name given in your registration details here. It is case specific
W21.3:Enter your unique registration ID here
W21.6/W21.7:\Sselect whether or not this is registered as a site licence version. This requires a specific user ID to be entered
W21.5:\Scancel the registration procedure and return to the title screen
W21.4:\Scontinue with the registration process, if you have entered the correct username and password
W22.-1:This is the text of the message
W23.-1:This is the reply window. Type your reply here
W24.-1:This is the index of currently loaded messages. Double-click on one to jump straight to it
M-2.00:\Rsee the programme info
M-2.01/M5.03:\Rcompose a new message
M-2.02:\Sclose the current message file
M-2.03:\Sopen the choices window which allows you to customise NetReader
M-2.04:\SQuit NetReader
M-2.0100/M5.0300/M22.0300/M24.0300:\Swrite a new message to a public newsgroup
M-2.0101/M5.0301/M22.0301/M24.0301:\Swrite a new private email message
M5.00/M22.00/M24.00:\Squickly send the current message to the printer using the standard printer font
M5.01/M22.01/M24.01:\Rexport the current message (or link if the mouse pointer is over one)
M5.0100/M22.0100/M24.0100:\Rexport the current message to a filer window or paste into another application
M5.0101/M22.0101/M24.0101:\Rexport any link below the mouse pointer to a file or paste into another application
M5.02/M22.02/M24.02:\Rexplode the current message file into seperate files for each message
M5.04/M22.04/M24.04:\Rjump to a specific message number
M5.0400/M22.0400/M24.0400:Enter the number of the message you want to jump to and press return
M5.05/M22.05/M24.05:\Rsearch for a specific keyword within the message file
M5.0500/M22.0500/M24.0500:Enter the text you wish to search for and press return
M5.06/M5.0600/M22.06/M22.0600/M24.06/M24.0600:\Renter the sender of the current email message into your killfile. In future messages by this person will automatically be skipped over
M5.07/M22.07/M24.07:\Squote the highlighted text in the message file into your reply. This only works if you have a reply window open and some text marked in the main message window
M5.08/M22.08/M24.08:\Rselect various utilities available
M5.0800/M22.0800/M24.0800:\Stag specific messages for deletion
M5.0801/M22.0801/M24.0801:\Suntag specific messages for deletion
M5.0802/M22.0802/M24.0802:\Smark specific messages as read
M5.0803/M22.0803/M24.0803:\Smark specific messages as unread
M5.0804/M22.0804/M24.0804:\Sfind the next reference in a message to yourself
M5.09/M22.09/M24.09:\Sclose the current message file
M12.00:\Screate a new local user (requires global password to be entered)
M23.00:\Ssend blind copies of the message to other people
M23.01:\Squote highlighted lines in the original message into your reply
M23.02:\Ssign the reply and send the message
M23.03:\Ssend the message without signing it
M23.04:\Ssend your reply to the printer as raw text to allow the printer to print it out using it's built-in font
M23.05:\Sabort replying to this message and close the reply window
