icon:This is the DAA application.|MClick select or drag a sprite file to the icon to start.
main:Double-click with select to select an area to calculate.|MDrag adjust to draw a line.|MDrag adjust with shift held down to remove a line.
# toolbox icons
titl:Click this icon to input the title data.
calb:Click here to select calibrate.|MThis must be done before cutting and filling can begin.
cuti:Click here to select cut.
fill:Click here to select fill.
calc:Click here to reveal the area calculations.
magn:Use the arrows to scale the view up and down, or type the values in.
magi:Click here to show the 'magnifier' window.
dsci:Click here to show the 'save results' window.
# data save window
dat0:Click 'OK' to save the file as the current filename (if valid).
dat1:Type in the filename here and click 'OK', or drag the icon above to a directory display.
dat2:Drag this icon to a directory display to save, or to a suitable application to edit.
dat4:When selected the new data will be appended to the file, otherwise a new file will be created.
# printer
prin:Click the printer icon to print the data.|MUse adjust to close the calculation windows automatically.
tprn:Click here to print the area totals and analysis.|MTo print the image, drag the icon in the 'Save Image' window to a printer driver.
# OK's
OK01:Click 'OK' to accept the data and save it.|MIt can be altered by clicking the 'title' icon again.
OK02:Click 'OK' to accept this value.|MIt can be altered by clicking the 'calibration' icon again.
# calc window
down:These icons display the cut and fill types selected.|MThey can be changed by choosing the types in the cut and fill submenus.
# errors
maxi:The maximum number of cuts/fills has been reached.
notfound:not found.
# menu items
# icon menu
M000:Info
M001:Preferences...
M002:Quit
# main menu
M100:Cut
M101:Fill
M102:Calibrate...
M103:Save types
# -------------
M1010:Show headings...
M104:Save results
M105:Print results
M106:Show results...
# -------------
M107:Reload
# M108:Calculate
M108:Magnify
M109:Save image
M400:Keep results
# menu titles
T000:D.A.A.
T200:Cut Type
T300:Fill Type
T400:Reload
# more errors/warnings
SOPT:Couldn't save options.
nfnd: not found.
room:No room for image.
cal0:WARNING: The calibration area is zero.
cal1:There is no calibration area.
cal2:The known area has not been entered.
cal3:The known area is zero.
line:Line colour must be between 0 and 15 inclusive.
Tdat:Title data not found - entries will be blank.
Mdat:Menu data not found - entries will be blank.
# help for menu items
H100:Choose this item for a plain 'cut' and to select the 'cut' tool from the toolbox.|mMove the pointer to the right to select and alter user cut types.
H101:Choose this item for a plain 'fill' and to select the 'fill' tool from the toolbox.|mMove the pointer to the right to select and alter user fill types.
H102:Choose this to save the user's cut and fill type preferences.
H103:Choose this item to reload this file.|mALL the calculations done on this file will be cleared.|mChoose the option in the sub-menu if you wish to keep them.
H104:This item will calculate the cut and fill areas, displaying the results in two windows.|mThis can also be done using the calculator icon in the 'toolbox'.
H105:Move the pointer to the right to scale the view to the desired magnification.
H106:Click select to save with the current filename. Move the pointer to the right to reveal the save window.
H400:This item will reload this file, keeping the calculated results.
H200:Choose this item to select the user's cut type or alter it by typing.
H300:Choose this item to select the user's fill type or alter it by typing.
H000:Move the pointer to the right to display information about this version of DAA.
H001:Choose this entry to display, alter and save the user's preferences.
H002:'Quit' will end your session with DAA.
# help for the windows
Hinf:This window displays information about DAA.
#Hop1:Enter your printer's code for the 'squared' character in the box to the right.
Hop2:Enter the correction factor here if the results are consistently different from known values.
#Hop2:Click here to enter the code.|mThis must be in the range 0-255.|mConsult your printer manual for further details.
#Hop3:Enter the colour of the lines your scanner produces in the box to the right.|mThis can be found using !Paint.|mThe anti-aliasing option improves the display of the image, particularly on lo-res monitors, but is slower.
#Hop4:Click here to enter the image's line colour.|mThis must be in the range 0-15 and can be found using !Paint.
Hop4:Enter the line colour here.|mThis must be in the range 0-15 and can be found using !Paint.
Hop5:Click here to accept and save your preferences to file.
Hop6:Click here to abandon any changes made.
Hop7:Click here to accept the changes.
Hop8:Click here to toggle the anti-aliasing option.|mThe anti-aliasing option improves the display of the image, particularly on lo-res monitors, but is slower.
Hop11:Click with SELECT to increase the value for the correction factor and with ADJUST to decrease it.
Hop12:Click with SELECT to decrease the value for the correction factor and with ADJUST to increase it.
Hop13:Click with SELECT to increase the value for the correction factor and with ADJUST to decrease it.
Hop14:Click with SELECT to decrease the value for the correction factor and with ADJUST to increase it.
# a few more messages
mode:For optimum speed, DAA can only process 16 colour images. Please refer to your RISC OS and scanner manuals for further details.
drag:To save, drag the icon to a directory display.
derr:Filing system error:
bads:Could not save as
nopr:The printer driver is not loaded.
# the save image window
sav0:Click 'OK' to save the file as the current filename (if valid).
sav1:Type in the filename here and click 'OK', or drag the icon above to a directory display.
sav2:Drag this icon to a directory display to save, or to a suitable application to edit.
# Scale window
Hscl1:Click SELECT and enter the scale here as a percentage and press RETURN to update the view.
Hscl2:Click SELECT to decrease the current scale and ADJUST to increase it.
Hscl3:Click SELECT to increase the current scale and ADJUST to decrease it.
Hscl5:Click here to set the scale to the percentage shown.
Hscl6:Click here to set the scale to the percentage shown.
Hscl7:Click here to set the scale to the percentage shown.
Hscl8:Click here to set the scale to the percentage shown.
Hscl9:Click here to close the scale window and leave the view unchanged.
Hscl10:Click here to accept the scale shown and update the view.
