home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
ARM Club 3
/
TheARMClub_PDCD3.iso
/
hensa
/
converters
/
spr2jpeg_1
/
!Spr2Jpeg
/
Documents
/
QuickGuide
< prev
Wrap
Text File
|
1995-02-19
|
772b
|
17 lines
Guide to Sprite 2 Jpeg
======================
You may have read the help file - if you haven't, then read it
before reading this. It explains a lot, but if you don't really
understand, then this is probably the easiest place to start.
Basically, you load Sprite 2 Jpeg, and drag image files onto
it. These might typically be Sprites, Jpegs, Clear, PCXs or
most anything. A standard save box pops up. Save the converted
image. You can select the type of image to save, if the
original was a Jpeg, from the pop-up menu at the bottom. And
that is pretty much that.
The options window allows you to change the advanced options,
which are explained in the help file. You can also save the
options etc. in the normal way from here.