home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
ARM Club 3
/
TheARMClub_PDCD3.iso
/
hensa
/
comms
/
streamer
/
streamerdoc
/
html
/
conf_ser
< prev
next >
Wrap
Text File
|
1995-04-13
|
1KB
|
30 lines
<html>
<head>
<title>Streamer User Guide - Configuring Streamer - Serial</title>
</head>
<body>
<h4><a name = "serial">Serial </a></h4>
This dialogue box controls Streamer's serial port parameters. It has two groups of settings; block driver and
setup.<p>
<h4><img src = "sprites/10" align = middle>Configuring the serial port</h4>
This version uses the block drivers system. "Internal" and "InternalPC" drivers are provided within
Streamer, which will be used if Streamer is not able to find a block drivers application. These are the drivers
for the internal serial port, either for Archimedes wired or PC wired serial cables respectively. Select the
required driver from the popup menu at the top of the dialogue box. Some serial interfaces have more than
one port. Set the port number using the arrow icons. <p>
The setup area controls the baud rate, word length parity and stop bits setting. Make your choices from the
popup menus. The XON/XOFF option controls whether or not XON/XOFF software hand-shaking is
employed in place of hardware hand-shaking (which is preferable). <p>
When you have made all your choices click on OK. A click on Cancel will cause all of your settings to
revert back to their status the last time OK was clicked. <p>
<a href = "conf_main">Back to configuration contents page</a><p>
<a href = "../Manl_html">Back to contents page</a>
</body>
</html>