DELQU:Do you really want to remove the selected text?
DELFA:Failed
BOPNIN:streamwin_openinput called for inputless streamwin
CNCT:Could not contract text
WRONGIND:Index seems wrong at line %d.
LOGSTUP:Startup
LOGCLSDWN:Closedown
LOGDISCON:disconnected
LOGCON:connected to
CNWTSPSU:Could not open spool setup file for writing
CNRFSPSU:Could not open spool setup file for reading
NOROOM:No room. Loss of text at the start of the stream has occured. Please free some memory.
MEMSHORT:Warning: Memory shortage. Please free some more memory. (eg: quit applications, clear a stream, reduce font cache)
STRINIFA:Could not allocate enough memory to initialize stream window.
UTLBD:Unable to load block driver
DINIFA:driver_initialise failed
SPFNDR:Could not setup port - no driver loaded
SPFPB:Could not setup port - port busy
CNFSBR:Unable to find suitable baud rate.
BBSSUER:Error in BBS setup
CNOHLSUO:Could not open highlights setup file for output
CNOHLSUI:Could not open highlights setup file for input
SUDSDBXO:The serial setup dialogue is already open
SUDTMPNF:template not found
SUDSSCER:Stream switch must be a single switch character or a hexadecimal number starting with '&'.
SUDMSTLG:Max streams too large. Maximum %d
SUDMSAL1:Max streams must be at least 1
SUDWTLMX:Width too large. Maximum %d
SUDWTSMI:Width too small. Minimum %d
SUDENTSS:You must enter a stream switch character. Default is '|'
SUDTMIMX:Too many input lines. Maximum %d
SUDIPLAL:Input lines must be at least 1
SUDWWATL:Word wrap at must be at least 16
SUDWWNGT:Wordwrap at cannot be greater than the width
ERRDRGSA:To save, drag the icon to a directory display.
SUDCDBXO:The colours setup dialogue is already open
SUDGESUO:Could not open setup file for reading
SUDMMFAI:Could not make menu
SDRFAIL:Unable to register a shutdown proc
TITCHFAI:Not enough memory to change window title -- increase wimpslot
STSVDBFC:Failed to create save box.
TNCCONTO:- connected to
TNCDISCO:- disconnected
TNCDSTIT:Dump Stream
TNCILLEV:warning: illegal value in line end setup
TNCMCERR:Error on mode change. Unknown new mode.
TNCOBOVF:Warning: output buffer overflow: data lost
TNCIBOVF:Warning: input data buffer overflow: data lost
TNCCLSTF:could not claim new stream
TNCCOSUF:Could not open TNC setup file
TNCNRFSF:No room to load TNC setup file
TNCINCSF:Incomplete TNC setup file
UUCCNOSF:Could not open UU coder setup file for output
HLENTMOD:Entry modified - do you really want to lose the changes?
HLMEMERR:Memory error
HLNOROOM:No room
HLDELQRY:Do you really want to delete this entry?
TNCSUWO:Could not open TNC setup file
:Can't have negative time in BREAK
FNKNOSEL:warning: no selected
FNKSHFK:Shift function keys
FNKCTFK:Ctrl function keys
FNKSCFK:Shift ctrl function keys
BUFPSE:Pause upload
BUFRES:Resume upload
CRUPBUF:You cannot remove a buffer that is currently being uploaded. Abort the upload first.
NOSELBUF:No selected buffer
TBALRUPL:This buffer is already being uploaded
TBALRUPQ:This buffer is already in the upload queue
TBALRUPA:This buffer is being uploaded, abort the upload first
NOUPTOPA:No upload to pause
NOUTABRT:Nothing to abort
CONFABRT:Do you really want to abort the upload?
WRNNEGBS:warning: buffer size <= 0
NOSBUFS:No spare buffers
NORMFBUF:No room to create new buffer
ZSFCBL:Files of 0 size cannot be loaded into a buffer
CNMSTMEN:buffers: could not make stream menu
ACONERR:A node connect has occurred on an unconnected stream!
OPSTRFA:Could not make open stream menu
PRELSTR:Out of streams. Please release some.
SFILTIT:Stream Data file
HTRSE:This is the terminal setup window.
HTRSESC:The characters entered here will be sent to the TNC immediately.
HTRSESL:This the the line feed / carriage return combination used for line ends.|MMake your selection from the popup menu.
HTRSELM:Click here for the popup menu to choose the line end combination.
HTRSEBT:This is the break time (in centi seconds) used for BREAK signals.
HTRSE8B:Select this option to strip the top bit from incoming data.|MThis must not be select when RXBlock is in use.
HTRSEWD:This is the maximum number of characters displayed on each stream window line.
HTRSEWR:This is the number of characters at which input data will be put onto a new line.
HTRSEIL:This is the default number of input lines for a stream window.
HTRSEDI:If this is selected input text will be dispalyed in the stream window.|MIt is better to use this and set your TNC not to echo, as input data thus displayed are rendered in a seperate colour.
HTRSEFI:This is the input data switching method.|MMake your choice from the popup menu.
HTRSEFM:Click here for the switch method popup menu.
HTRSEMS:This is the maximum number of streams.|MYou should set USERS to the same value.|MFor a value of 10 use USERS 0.
HTRSESS:This is the stream switch character.
HTRSEGB:Select this option for beeps from Ctrl G characters.
HTRSEDB:Select this option for beeps on disconnection.
HTRSECB:Select this option for beeps on connection.
HTRSEAB:Select this option for beeps on connection from a node.
HTRSEOK:Click here to accept the terminal setup options.
HTRSECA:Click here to cancel this setup and return to the last set of options.
HSSPA:This is the serial port parity setting.|MYou may select a different setting from the popup menu.
HSSDR:This is the currently selected block driver.|MYou may select a different driver from the popup menu.
HSSDRA:Click here for the driver popup menu.
HSSBDA:Click here for the baud rate popup menu.
HSSPAA:Click here for the parity popup menu.
HSSSB:This is the serial port stop bits setting.|MYou may select a different setting from the popup menu.
HSSCA:Click here to cancel this setup and return to the last set of options.
HSSOK:Click here to accept the serial port setup options.
HSSBD:This is the serial port baud rate setting.|MYou may select a different baud rate from the popup menu.
HSSWL:This is the serial port word length setting.|MYou may select a different setting from the popup menu.|MSelect 8 bit words for binary transfer or RXBlock, etc.
HSSWLA:Click here for the word length popup menu.
HSSSBA:Click here for the stop bits popup menu.
HSSXX:Select this option for xon / xoff operation.|MThis is not recommended for modes such as RXBlock.
HSSPN:This is the portnumber setting for the selected serial driver.|MClick on the up and down arrows to change the port number.
HSS23:Click here to decrement the port number.
HSS24:Click here to increment the port number.
HSS:This is the serial port setup window.
HINFOPU:This is a multi-stream packet radio terminal driver.|MTo find out more about amateur radio contact the RSGB.
HINFOSOQ:Streamer was originally written by Ben Summers, G0SOQ.
HINFOTJC:Streamer has been extended to this version by Dr. Simon Melhuish, G4TJC.|MHe may be contacted at G4TJC@GB7CHS|Mor sjm@jb.man.ac.uk if you have internet access.
HINFOVE:This is the version number.|MPlease quote it in any correspondance.
HINFONA:This program is called "Streamer".|MPlease read the associated documentation for more information.
HINFO:Information about Streamer.
HSCO:This is the colour setup window.
HSCOCM:Click here for a choice of colours.
HSCOBA:This will be the stream window background colour.|MYou may choose another colour from the popup menu.
HSCOIF:This will be the colour used for text in the input pane.|MYou may choose another colour from the popup menu.
HSCOIB:This will be the background colour of the input pane.|MYou may choose another colour from the popup menu.
HSCOHI:This will be the colour used to highlight text.|MYou may choose another colour from the popup menu.
HSCOFR:This will be the colour of received text.|MYou may choose another colour from the popup menu.
HSCOCR:This will be the colour of the caret.|MYou may choose another colour from the popup menu.
HSCOCA:Click here to cancel this setup and return to the last set of options.
HSCOOK:Click here to accept the colour setup options.
HSLBHE:This is the first line that will be entered at the start of a logbook session.
HSLB2L:This is the second line that will be entered at the start of a logbook session.
HSLBEN:This is the format of the text to be entered for each logbook entry.|MThe format follows the printf conventions of C, with added tags for call signs, etc.
HSLBFR:This is the frequency value that will be used for logbook entries.
HSLBMO:This is the emission mode that will be used for logbook entries.
HSLBPW:This is the power value that will be used for logbook entries.
HSLBLO:If this option is selected, events will be logged.
HSLBOK:Click here to use these settings for log keeping.
HSLBCA:Click here to cancel any changes to the log keeping setup.
HSLBNI:This is the filename of the logbook file.
HSLBFC:Click here to cancel spooling of logbook entries.
HSLBFS:Click here to start spooling logbook entries to a file.
HSLB14:Drag this icon to a filer window to spool logbook entries to a file.
HSLB:This is the log keeping setup window.
HSSBOK:Click here to confirm the save operation.
HSSBPR:Select this option for processed data format.|MThe file will be of type "text", editable by Edit.
HSSBST:Select this option for Streamer data format.|MWith this format the TX/RX information is retained.|MUse Streamer to view this type of file.
HSSBRA:Select this option for raw data format.|MThe file will be of type "data".
HSSBTX:Select this option to save transmitted data, as well as received data.|MThis is not required for Streamer format saving.
HSSB7:Drag this icon to a filer window to spool logbook entries to a file.
HSSBCA:Click here to cancel the save operation.
HSSBNI:This is the filename for the save operation.|MYou may enter a full path name, or just a leafname and drag the file icon to a directory.
HSSB:This is the save dialogue box.|MDrag the file icon to a directory to save.|MDrag a file or directory onto this window for automatic name entry.
HTOBOK:Click here to copy the text to a buffer.
HTOBRA:With this option selected the raw data will be copied.
HTOBTX:With this option selected the transmitted data will be copied as well as the received data.
HTOBPR:With this option selected the processed data will be copied.
HTOB:This is the "To buffer" window.
HHLDPA:This shows the currently defined highlight words.|MClick on an entry to select it for update or deletion.
HHLDIP:Enter a word to highlight here.
HHLDCH:Click here to re-define the selected entry.
HHLDSA:Click here to save the list.
HHLDDE:Click here to delete the selected entry.
HHLDAD:Click here add the new entry to the list.
HHLD:This is the "Highlights" window.|MItems in the list are displayed in the highlight colours.
HFKDOK:Click here to use these function key definitions.
HFKDSH:Select this option to edit the Shift + FN key definitions.
HFKDCT:Select this option to edit the Ctrl + FN key definitions.
HFKDSC:Select this option to edit the Shift + Ctrl + FN key definitions.
HFKDWH:This is the function key set being editted at present.
HFKDCA:Click here to cancel any changes to function key definitions.
HFKDSA:Click here to use and save the function key definitions.
HFKD:This is the function key definition window.|MSelect which set to edit from the options at the bottom.|MSelect the "CR" icons for those keys to which you want to append a return.
HBUWRB:Click here to remove the selected buffer.
HBUWAU:Click here to abort the current upload.
HBUWAL:Click here to cancel all pending uploads.
HBUWCA:Click here to cancel the selected pending upload.
HBUWPU:Click here to pause/resume the current upload.
HBUWPA:This is the buffer pane.|MYou may click on a buffer to select it for uploading, removing, etc.
HBUWUP:Click here to start uploading the selected buffer.|MIf there is already an upload in progress, this buffer will be added to the queue.
HBUWTM:Click here for a popup menu of streams to which buffers may be uploaded.
HBUWTS:This is the selected stream to which a buffer will be uploaded when "Upload" is clicked.|MYou may select another stream from the popup menu.
HBUWRA:If this option is selected, buffers will be removed from memory once they have been uploaded.
HBUW:This is the buffers window.|MDrag a file onto this window to put it in a buffer ready for uploading.|MYou may also copy stream text directly to a buffer.
MHELP0:Move the pointer to the right for operations on the window text.
MHELP1:Move the pointer to the right for operations on the selection.
MHELP2:Click here for buffer control.
MHELP3:Move the pointer to the right for miscellaneous menu options.
MHELP4:Click here to open a new view on this stream.
MHELP00:Click here to clear the stream text or remove a "new view".
MHELP01:Move the pointer to the right to choose how to send stream text to a buffer.
MHELP02:Move the pointer to the right to choose how to save the stream text.
MHELP03:Move the pointer to the right to choose how to spool incoming text.
MHELP04:Move the pointer to the right for other menu options on this type of stream.
MHELP10:Click here to clear your selection.
MHELP11:Click here to delete the selected text.
MHELP12:Move the pointer to the right to choose how to send the selected text to a buffer.
MHELP13:Move the pointer to the right to choose how to save the selected text.
MHELP30:Click here for control over highlighting.
MHELP31:Clcik here to define function keys.
MHELP32:Not implemented yet.
MHELP33:Click here to send a break signal on the serial device.
TNCHLP04:Move the pointer to the right for other menu options on this TNC stream.
TNCHLP040:Click here to put this stream in command mode.
TNCHLP041:Click here to put this stream in converse mode.
TNCHLP042:Click here to put this stream in transparent mode.
TNCHLP043:This option determines whether or not the stream mode is automatically changed on connects/disconnects.
TNCHLPTX:This is a tnc stream input window.|MClick on the window to gain the caret.|MUse the arrow keys and "return" to re-enter previous text lines.
TNCHLPRX:This is a tnc stream output window.|MFiles dragged onto this window will be placed in a buffer.|MThe title bar shows the mode and connect status.
DMPHLP04:No client options available for the dump stream.
DMPHLPRX:This is the dump stream window.|MIt is for data diverted from other streams by RXBlock filtering.|MFiles dragged onto this window will be placed in a buffer.
LOGHLP04:No client options available for the log book stream.
LOGHLPRX:This is the log book window.|MTo change the format of log entries use the Setup -> Terminal... iconbar menu.
STFHLP04:No client options available for Streamer file (StrmData) streams.
??????TX:This stream should not have a TX window!
??????RX:This is a stream window.
IHELP0:Move the pointer to the right for information on Streamer.
IHELP1:Move the pointer to the right for setup options.
IHELP2:Move the pointer to the right to choose a stream window to open.
IHELP2?:Choose a stream window to open.
#Be sure to compile with doctored version of RISCOS_Lib
IHELP3:Click here to quit Streamer.|MAny unsaved text will be lost.
IHELP10:Click here for setup options on the serial port.
IHELP11:Click here for terminal setup options.
IHELP12:Click here to setup the colour options.
IHELP13:Click here for log keeping setup options.
IHELP14:Not implemented yet.
IHELP15:Click here to save your setup options.|MStreamer will load with this setup in future.
BHELP?:Click on a stream name to set the upload destination for the selected buffer.|MIt is not possible to upload to the greyed-out streams.
SDRHLP?:Click on the driver you want to use:|If you are using your machine's standard port pick the sriver suited to the cable you are using.
SBRHLP?:Click on the baud rate at which you want to communicate with your TNC.
SWLHLP?:Click on word length you want to use.|MYou must use 8 bit words for RXBlock or binary transfer modes.
SPAHLP?:Click on the parity type you want to use.
SSBHLP?:Click on the number of stop bits you require.
TLEHLP0:Select this option to send a carriage return at line ends.
TLEHLP1:Select this option to send a line feed at line ends.
TLEHLP2:Select this option to send carriage return then line feed at line ends.
TLEHLP3:Select this option to send line feed then carriage return at line ends.
TFIHLP0:Select this option to turn off stream switching.
TFIHLP1:Select this option to use simple stream switching.
TFIHLP2:Select this option to use RXBlock stream switching.|MThis allows simultaneous multi-stream connections and monitoring, but is only available on TNC2-compatible TNC's.
TFIHLP3:Select this option to use "cmd" switching.|MThis is the same as "Simple" mode, but it attempts to stop "cmd:" prompts appearing on the wrong streams.