Hib:This is the StrongED text editor.|MClick to create empty textfile.
Hwn05??:This is a StrongED view.
Hwn0600:This shows the status of the text :|M blank : Positively unchanged.|M ? : Length is same, but may be changed anyway.|M * : Positively changed.
Hwn0601:This shows the position of the caret in the text.
Hwn0602:This shows whether the editor is in insert or overwrite modus.
Hwn0603:This shows what will happen when you press the TAB key.
Hwn0604:This shows whether there is a block marked or not.|M blank : There is no block marked.|M b : There is a block marked, but not in this text.|M B : There is a block marked in this text.
Hwn0605
Hwn0606
Hwn0607
Hwn0608:These are the bookmarks.|MIf white, no mark is set, if grey then mark is in another text, and if black then mark is in this text.|M\Sgoto mark. \Aset mark. Doubleclick to clear mark.
Hwn0609:This is not used in this version, and will always show the same.
Hwn060A:This shows which wrap-type is selected for this view.|M CW : Character wrap.|M WW : Word wrap.|MIf small letters, then no lines are currently wrapped.
Hwn060B:This shows which newline type this text has.
Hwn06??:This is the infobar.
Hwn07:This is a list of all texts currently loaded into StrongED.
Hwn08:This is a "list of found" window.
Hwn09:This is the alert/message window.
Hwn0A:This is a Throwback window.|MClick on a line and StrongED will load the file and move to the correct line.
# Iconbar:
MIconbar:StrongED II
# Info \Rto get information about this version of StrongED.|MClick to get help on StrongED.
# Switches \Rsee or set any of the switches.
# TextList c-L Click to open a window continually showing all loaded texts.
# Infobar Click to turn the infobar on/off.|M\Rconfigure what it should show.
# Cursortype \Rconfigure which cursortype to use.
# Create Click to create an empty textfile.|M\Rcreate other filetypes.
# Quit Click to Quit StrongED.|M(Not that you'd ever want to..)
# Iconbar:Switches->
MSwitch:Switches
# Trap DClick When this is off, StrongED won't load any file you double click on.
# Trap EditRequest When this is off, StrongED won't respond to requests from other aplications to do External Edit for them.
# Open behind When this is on, and you drag multiple files to StrongED, the first file loaded will be on top.
# Throwback When this is on, StrongED will respond to Throwback messages from Desktop-C (or any other app using throwback)
# Merge Throwbacks When this is on, new throwbacks will not get a separate window, but appear at the end of the current one.
# Strip linenumbers When this is on, StrongED will remove linenumbers from the start of loaded BASIC files.
# Fastchars When this is on, and you are in a suitable 16-colour mode, StrongED will use its own routines for writing text to screen.
# Undo When this is off, StrongED won't keep any Undo information. This is for those that never make mistakes..
# Beep When this is off, StrongED won't beep when an error occurs.
# Suppress Spurious When this is off, StrongED will report certain dubious messages from other applications as errors.
# Load duplicates When this is off, StrongED will not load a file when double-clicked, if a file with the same name is already loaded.
# Hide pointer When this is on, StrongED will hide the mouse pointer when you start typing.
# Print formfeed When this is on, StrongED will issue a form-feed (eject paper) when it is done printing. This is for those with laser printers.
# Coredump file \Rset which file, if any, should be produced if the program crashes.
# Save setup Click to save settings.
MCore:Coredump
# None No file will be written if the program crashes.
# Small A file containing all the texts will be tried written to $.SmallDump (The root of your current disc/filing system)|M This only happens if you answer "no" to continue.
# Large A file containing 'everything' (the whole wimpslot + list of registers) will be written $.LargeDump if you crash.|MIf you want to report a bug to us, you can send us this file.
# Iconbar:Infobar->
MInfobar:Filepos
# (x,y) Click here if you want the infobar to show the caret's x,y position in the text.
# (Offset) Click here if you want the infobar to show the caret's offset position in the text.
# Iconbar:Infobar->(x,y)->
Mxy:(x,y)
# x is column
# x is char
# x starts from 0
# x starts from 1
# y is textline
# y is wrapline
# y starts from 0
# y starts from 1
# Iconbar:Infobar->(offset)->
Moffset:(offset)
# Decimal offset
# Hex offset
# Offset starts from 0
# Offset starts from 1
# Iconbar:Cursortype->
MCurtyp:Cursortype
# Caret Click here if you want the text cursor to appear as a thin vertical line.
# Block Click here if you want the text cursor to appear as a block.
# Flashing Click to turn switch on/off.|MWhen this is on, the text cursor will continously flash on/off/on/off..
# Iconbar:Create->
MCreate:Filetype
# Text Click to create an empty textfile.
# Obey Click to create an empty Obey file.
# Exec Click to create an empty Exec file.
# Click to create an empty file of given type.
# View:
MView:StrongED
# Misc \Rget to the miscellaneous menu.
# Save \Rsave text, block or viewers.|MClick here to save text directly.
# Block \Rget to the block menu.
# Edit \Rget to the Edit menu.
# Display \Rget to the Display menu.
# TaskWindow \Rget to the Task Window menu.
# Mode \Rget to the Mode menu.
# View:Misc->
MMisc:Misc
# Help F1 Click to get help on StrongED.
# Print \Rprint text or marked block.
# File info \Ropen the fileinfo box.
# Filetype \Rset the filetype for this text.|M(This can also be done in the savebox)
# Match )}] Click to turn matching of parantheses on/off.|M(When you type a ")", StrongED will search backwards for the corresponding "(", and mark it. If not found, it will beep)
# View:Misc->Print->
MPrint:Print
# Text Print Click to print text.
# Block ⇧Print Click to print marked block.
MFTyp:Filetype
# Type filetype and press RETURN.
# View:Save->
MSave:Save
# Text F3 \Ropen savebox for this text.
# Block s-F3 \Ropen savebox for the marked block.
# Viewers \Ropen savebox for the viewers.|M(A file containing definitions of which texts are loaded, and where the views are..)
# View:Block->
MBlock:Block
# Mark \Rget to the mark menu.
# Clear mark c-Z Click to clear the currently marked block.
# Process \Rget to the block process menu.
# View:Block->Mark->
MMark:Mark
# Start F6 Click to set start or end of block.
# End F6 Click to set start or end of block.
# Word c-A 2 Click to mark the word at the cursor.
# Line c-A 3 Click to mark the line at the cursor.
# Text c-A 4 Click to mark the entire text.
# View:Block->Process->
MProcess:Process
# Copy c-C Click to copy block to where cursor is now.
# Move c-V Click to move block to where cursor is now.
# Delete c-X Click to delete block.
# Uppercase c-BU Click to force text in block to uppercase.
# Lowercase c-BL Click to force text in block to lowercase.
# Swap case c-BS Click to swap case on text in block.
# Indent \Rindent marked block.
# View:Block->Process->Indent->
MIndent:Indent
# Type a positive number to indent each line in block with that many spaces. Type a negative number to remove characters.|MAnything else will be inserted as written (but \\t will be converted to TAB)
# View:Edit->
MEdit:Edit
# Auto indent Click to turn auto indent on/off.|MWhen this is on, and you press return, StrongED will start the new line with the same number of spaces and TABs as the current line has.
# Insert Click to toggle between insert and overwrite mode.
# Auto trim Click to toggle auto trim on/off.|MWhen it is on, StrongED will remove any spaces and TABs from the end of a line when you move away from it.
# Protect \n Click to toggle protection of line-end on/off.|MWhen this is on, you can't use the [COPY] key to join two lines.
# After Block Click to toggle After Block on/off.|MWhen on, the cursor will be placed at the end of the block when you move or copy it.
# Tabkey \Rdecide how the TAB key should behave.
# Search F4 \Ropen the interactive searc dbox.
# Replace s-F4 \Ropen the Search/Replace dbox.
# ListOfFound F2 \Ropen the List of Found dbox.
# Goto line F5 \Ropen the Goto Line dbox.
# Goto block s-F5 Click here to move cursor to start/end of marked block.
# Undo F8 Click here to undo the last change done to the text.
# Redo c-F8 Click here to redo the last change that was undone.
# Change \n \Rchange physical line ending
# Unwrap Click here to insert newlines where lines wrap.
# View:Edit->Tabkey->
MTabkey:Tabkey
# 'Truetab' Click here to make the TAB key insert a TAB character.
# Nearest Click here to make the TAB key insert enough spaces to position cursor under/over start of word on line above/below.
# Click here to make the TAB key insert enough spaces to move caret to the next column divisible by the given number.
# View:Edit->Change \n->
MNewline:Newlines
# LF (0A) This is the standard line ending on the Archimedes.
# CR (0D) I can't quite remember where this line ending is used, but it is..
# LF+CR (0A0D) This is what you get when you store output from the VDU|M*Modules { > ModList } The file ModList will have this line ending.
# CR+LF (0D0A) This is the standard line ending on MSDOS machines.
# View:Display->
MDisplay:Display
# New view c-WC Click here to create a new view for the text.
# Linespacing \Rset the distance between the lines.
# Margin \Rset the left and right margin.
# Wordwrap Click here to turn wordwrap on/off.
# Wrapwidth \Rset width of text.
# ShowTab \Rdecide how a TAB character should be displayed.
# ShowCtrl \Rdecide how a control character should be displayed.
# \n type \Rdecide which line ending StrongED should assume the text has.|MThis will alter how the text is displayed, and which character is inserted when you press RETURN
# Colour \Rmove to the colour menu.
# Default pos Click here to set default window position to where current view is now.|MThis is used to decide where new windows should be opened.|MThis only takes effect after you've saved the setup and started again.
# View:Display->Linespacing->
MLSpace:Linespacing
# After \n \Rset the vertical distance between the end of a textline and the next line.
# All lines \Rset the vertical distance between all lines.
# View:Display->Linespacing->After \n->
MAfterNL:Linespacing
# Type the new vertical distance between the end of a textline and the next line.
# View:Display->Linespacing->All lines->
MAfterAll:Linespacing
# Type the vertical distance between all lines.
# View:Display->Margin->
MMargin:Margin
# Type new value for margin, then press RETURN.
# View:Display->Wrapwidth->
MWrapW:Wrapwidth
# Automatic Click here to set wrapwidth to automatic.|MWhen this is on, the width of the text will always be the same as the visible width of the window.
# 80 Click here to set wrapwidth to 80 chars.
# 132 Click here to set wrapwidth to 132 chars.
# Click here to set wrapwidth to the given value.
# View:Display->ShowTab->
MShowTab:ShowTab
# As Ctrl chars If this is on, TAB characters will be displayed in the same way as other control characters.
# Tab to 4 column If this is on, TAB characters will force a jump to the next column divisible by 4.
# Tab to 8 column If this is on, TAB characters will force a jump to the next column divisible by 8.
# |------| TAB If this is on, TAB characters will be visible.
# View:Display->ShowCtrl->
MShowCtrl:ShowCtrl
# Don't show If this is on, control characters will not be displayed at all.
# [hx] If this is on, control characters will be displayed with its hexadecimal value.
# [dec] If this is on, control characters will be displayed with its decimal value.
# . If this is on, control characters will be displayed as a "."
# View:Display->Colour->
MColour:Colour
# Invert Switch foreground and background colours.
# Foreground \Rselect foreground textcolour.
# Background \Rselect background textcolour.
# Background 2 \Rselect which colour to use to the right of the line.
# Block foregr \Rselect foreground textcolour inside a block.
# Block backgr \Rselect background textcolour inside a block.
# Mark foregr \Rselect foreground textcolour inside a mark.
# Mark backgr \Rselect background textcolour inside a mark.
# Control \Rselect foreground textcolour to use for control characters.
# Caret \Rselect which colour to use for the caret.
# View:Task->
MTask:TaskWindow
# AutoScroll When On, view will automatically scroll to show output.
# Suspend Click to halt task.
# Resume Click to resume a halted task.
# Kill Click to kill task.
# View:Mode->
MModeFN:Mode
# Change mode \Rselect which mode to use.|MThis only changes the key bindings and this menu.
# ListOfFound:
MLoF:ListOfFound
# Save \Ropen savebox for this list.
MRScope:Scope
# Block Replace all occurences inside marked block.
# Text Replace all occurences after caret in this text.
# All Texts Replace all occurences
MLoT:List o Texts
# New View Create new view for this text.
# Save text Save this text without question.
# Kill View Kill this view.
# Save changed Save all changed files without question.
# Kill unchanged Kill all files that are unchanged.
# Kill all Kill all files.
# Errors..
Err00:%s
Err01:Not enough memory.
Err02:Too many windows. Can't create View.
Err03:Cannot load here!
Err04:File not found
Err05:Can't load a directory.
Err06:Load failed. Did sender die?
Err07:Has recieved uncorrect DataSave message..
Err08:Has recieved spurious DataSaveAck message..
Err09:Has recieved spurious DataLoad message..
Err10:Has recieved spurious DataLoadAck message..
Err11:Has recieved uncorrect DataOpen message..
Err12:Has recieved spurious RamFetch message..
Err13:Has recieved spurious RamTransmit message..
Err14:Can't save text to itself.
Err15:No help on that word.
Err16:No block is marked.
Err17:Block not in this Text.
Err18:Can't copy block into itself.
Err19:Can't have fastchars for this mode.
Err20:Not enough memory for fastchars.
Err21:Mark is undefined.
Err22:Can't move block into itself.
Err23:String contains unknown escape character.
Err24:Please enter a search expression 1st..
Err25:String not found.
Err26:Couldn't replace more than %u4 occurences
Err27:Unable to convert to/from BASIC.
Err28:Can't find !StrongHlp.
Err29:Text is locked while printing.
Err30:You must quit old print-job first.
Err31:Searching for null-strings isn't very productive.. :-)
Err32:Undo is turned off for this text.
Err33:Nothing to Undo.
Err34:Nothing to Redo.
Err35:Unknown Undo/Redo code %u4.
Err36:This entry does nothing.
Err37:Don't know where to save. Drag to directory.
Err38:Oops.. Unknown internal error..!?! (%u4)
Err39:BASIC unconvertable/corrupt
Err40:Nothing to playback.
Err41:The DDEUtils module is needed for throwback
Err42:Learn buffer is full. Turned off.
Err43:This only works for BASIC programs.
Err44:Unknown token in mode-file '%s' at offset %u4.
Err45:Unexpected end of mode-file '%s'.
Err46:Expected keyname in mode-file '%s' at offset %u4.
Err47:Only c-? supported. (Mode-file '%s' at offset %u4.)
Err48:This character can't be used as a control key. (Mode-file '%s' at offset %u4.)
Err49:Only 3 keys allowed per keystroke. (Mode-file '%s' at offset %u4.)
Err50:Unknown function in mode-file '%s' at offset %u4.
Err51:Bad keylist name in mode-file '%s' at offset %u4.
Err52:Function don't take parameters. (Mode-file '%s' at offset %u4.)
Err53:Function desn't take numbers as parameter. (Mode-file '%s' at offset %u4.)
Err54:Function desn't take strings as parameter. (Mode-file '%s' at offset %u4.)
Err55:This is not an 'ExternalEdit' text..
Err56:"%s" not present.
Err57:Menuline expected in mode-file '%s' at offset %u4.
# Messages and warnings..
Msg00:None found
Msg01:One found
Msg02:%u4 found
Msg03:Welcome to StrongED version 2.30
Msg04:One or more texts are altered. Are you sure?
