{S:X;X;0;0;Camera Club Labels{ITR-X}by Steve Harratt}
{S:X;X;0;1;Dear Gerald}
{S:X;X;0;2;Thank you for your recent replies to my problems with the printing of Logos on each of the labels.}
{S:X;X;0;3;I have now experimented with a combination of your suggestions and ones I had previously had, and I think I have come up with something that appears to work, though like you have found the left margins seem to move and displace the text, to a degree.}
{S:X;X;0;4;I have included on this disc your original workings and my latest solution to the problem.}
{S:X;X;0;5;First of all the idea of using 18 copies of the draw file was great, and I was going along the path of trying to insert one in each label slot, I think I would never of thought of it, but it is the logical way. My draw file was easily modified to the correct size by putting the original into Artworks and using its scaling facility to reduce the file in proportion. Once I had got the drawfile to the right scale I saved it as a standard draw file into Drawplus then copied it 3 times. I then set out the first line of logos so that they printed into the correct place.}
{S:X;X;0;6;I then grouped the three across the page and copied those 6 times, the next stage was simpler than I thought I merely aligned the bottom row of logos, so far having printed about four sheets of paper. Then I used the SPACE OUT feature of drawplus and surprisingly it put the rest of the logos in the correct place. I then saved it as [logo_01].}
{S:X;X;0;7;Following your instructions I loaded it into my template file and placed it as a backdrop and printed it out, initially it printed in the wrong place, ie. it wasn't far enough down the page and for a few hours I couldn't work it out. Then I placed a marker in the draw file slightly above the logos, on the file [logo_01] you can see it as 'Top' by careful positioning I was able to get the logo file to print in the correct place. In the final version of my drawfile I simply altered the colour of the word top to white, hey presto it worked.}
{S:X;X;0;8;Finally I don't know why but your label text appears to move to the left as you have explained, however in my file [L7161_01] which is in fact a slightly modified one that came with Wordz doesn't seem to move the text as far to the left as your. I don't know why but it doesn't. I have printed out two sheets of labels one from your file [GF_07] and one from my file [L7161_01] and as you can see there is a difference, perhaps you can spot it.}
{S:X;X;0;9;I think that for now I like you will run PipeDream along side Wordz until I'm satisfied that I know what I am doing. Another problem I am trying to solve is how to put a horizontal line across the page, perhaps at the end of selected paragraphs. I have used the box feature but it appears to put it across the whole width of the page. I have managed to find a way of altering the right hand side margin, but there doesn't seem to be a way of altering the left hand side, though I could have missed it.}
{S:X;X;0;10;Once again thank you for your help with the labels, and by the way if you wish to use it to assist other members of Zline then please do.}
