{S:X;X;0;4;Thank you for your recent reply to my letter, and for the help you have given. I think I now understand how to save Styles, though I do get a little confused by what seems to be happening. I have also tried putting an extra line prior to a table or graphic and that seems to work, and is quite logical really, in the end.}
{S:X;X;0;5;However I am still having great difficulty with labels.}
{S:X;X;0;6;Some months ago after many hours of trial and error I finally managed to get a label to print how I wanted it via Pipedream 4. Infact it was initially based on your label files with the Abacus logo, which was substituted for our Camera club logo.}
{S:X;X;0;7;At that time I bought a small supply of Avery Laser labels code L18-50 these labels measure 66mm * 46.5mm having three across and 6 down, a total of 18 labels. I had no sooner got my labels as I wanted them when Avery changed the sizes slightly and the code. However I managed to buy a box of 250 labels giving me a total of 4,500 bearing in mind that at the most I would use about 350 a year I had obtained approximately 13 years supply ! very pleased I thought.}
{S:X;X;0;8;Now I find myself again trying to create a label file for these labels only this time it is more important to be able to do it, as I have said I have got the labels now.}
{S:X;X;0;10;I have altered the settings in some of the dialog boxes and understand some of what is happening, but when I load in my CSV file everything changes again.}
{S:X;X;0;11;Finally as I am writing this letter I decided to try and modify the second label file on the examples disk, and I think I have now got the text printing as I want it.}
{S:X;X;0;12;I really am at a loss in understanding what is going on at the present time, despite now getting what I want, but I can clearly see that when it is set up correctly it will be far quicker and easier than using Pd4.}
{S:X;X;0;13;I don't know if it is possible but I would also like to include our logo on some of the labels, as shown on the enclosed membership card. But again I am at a loss as to how to do it.}
{S:X;X;0;14;I have included on the disk a file called [temp] which is the CSV data, a file called [DccLogosm] which is the logo, and a file called [DCC-Label] which is the label file. I do hope that you will be able to demonstrate how I can get the logo into the labels, so that it to replicate down with the text.}