home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
ftp.sunet.se/pub/OS2/
/
2014.11.ftp.sunet.se_pub_OS2.tar
/
ftp.sunet.se
/
pub
/
OS2
/
hobbes
/
os2
/
system
/
drivers
/
storage
/
os2_2318.exe
/
RELEASE.TXT
< prev
next >
Wrap
Text File
|
1999-05-25
|
18KB
|
532 lines
PCI IDE Device Driver Ver 2.3.18
────────────────────────────────────
1) Driver Name: VIA Bus Master PCI IDE Driver
2) Description: IDE driver for VIA TECHNOLOGIES, INC.
3) Release Date: 99/05/25
4) Supported Operating Systems:
a. DOS 5.x or above
b. NewWare 3.x or above (Note)
c. OS/2 2.x or above
d. Windows 3.1 or above
e. Windows 9x 4.00.950 or above
f. Windows NT 3.51 or above
g. Unix SCO 3.2.4 or above
h. Linux
Note : If you want to combine the Hard disk & CD-ROM on the same channel
above the Netware 4.x version. VIA Netware driver only supports
to handle the Hard disk & CD-ROM on the separately channel for
Netware 4.x. But it is no limitation for the Netware 3.x. We
recommend that you use the Netware 4.x default driver if you want
to have the Hard disk & CD-ROM on the same channel.
5) Revision Number: 2.3.18
6) Number of Files: 37
7) Feature List:
* For Windows 9x and Windows NT:
Support silent mode install:
Available parameters: -b, -u, -s
Parameter Description
-b Causes Setup.exe automatically to reboot after
the silent mode install successfully.
-u Uninstall driver. This parameter must works with
the '-s' parameter.
-s Silent install driver.
Note:
- A dash(-) must precede the command line parameters.
- The parameters '-b' and '-u' must be specified before the '-s'
parameter.
Examples:
setup.exe -b -s Silent install driver and reboot the computer.
setup.exe -u -b -s Silent uninstall driver and reboot the computer.
setup.exe -s Silent install driver but not reboot the computer.
setup.exe -u -s Silent uninstall driver but not reboot the computer.
Supported drive includes:
- ATA fixed disk
- ATAPI CD-ROM devices
- ATAPI Tape Drives
- ATAPI CD-ROM Changer Drives
- ATAPI DVD-ROM Drives
- ATAPI Writeable CD Drives
- ATA/ATAPI LS-120, ZIP, Cartridge and Removable Media Drives
Support transfer mode:
- PIO Mode
- Single Word DMA
- Multiword DMA
- Ultra DMA Mode 0/1/2
Compatible with enhanced CD application:
- Video CD
- Music CD
- DVD
- Multi-CD changer
- CD recordor
* For Windows 3.1 and MS-DOS:
Support transfer mode:
- PIO Mode
- Single Word DMA
- Multiword DMA
- Ultra DMA Mode 0/1/2
* For OS2:
Supported drive includes:
- ATA fixed disk
- ATAPI CD-ROM devices
- ATAPI CD-ROM Changer Drives
- ATA/ATAPI ZIP, Cartridge and Removable Media Drives
Support transfer mode:
- PIO Mode
- Single Word DMA
- Multiword DMA
- Ultra DMA Mode 0/1/2
8) Driver installation:
a) DOS Driver
*************************
** Driver Installation **
*************************
DOS device driver could be installed by using the "SETUP16.EXE" setup
program.
C> SETUP16
It will add the following line to CONFIG.SYS,
DEVICE=C:\VIAIDE\DOS\VIAIDE.SYS /SET_DMAM=Y,Y,Y,Y
and copy the VIAIDE.SYS to the \VIAIDE directory.
************************
** Enable/Disable DMA **
************************
If you want to disable the DMA, you could change the "Y" to "N". For
example, you want to disable the PM DMA mode.
/SET_DMAM=N,Y,Y,Y : DMA mode for PM, PS, SM, SS.
* PM - Primary Channel Master drive
PS - Primary Channel Slave drive
SM - Second Channel Master drive
SS - Second Channel Slave drive
***************************
** Driver Uninstallation **
***************************
If you want to remove the "VIA Bus Master PCI IDE driver" from your
system then you could remove the \VIAIDE\VIAIDE.SYS file and delete
the DEVICE item from the CONFIG.SYS. After the reboot, the VIA Bus Master
PCI IDE Driver is not existing in your system.
b) NetWare Driver
*************************
** Driver Installation **
*************************
NetWare device driver could be installed by using the "SETUP16.EXE"
setup program.
C> SETUP16
It will add the following line to the STARTUP.NCF file,
LOAD C:\VIAIDE\VIAIDE.DSK /SET_DMAM=Y,Y,Y,Y
and copy the VIAIDE.DSK to the \VIAIDE directory.
************************
** Enable/Disable DMA **
************************
If you want to disable the DMA, you could change the "Y" to "N". For
example, you want to disable the PM DMA mode.
/SET_DMAM=N,Y,Y,Y : DMA mode for PM, PS, SM, SS.
* PM - Primary Channel Master drive
PS - Primary Channel Slave drive
SM - Second Channel Master drive
SS - Second Channel Slave drive
***************************
** Driver Uninstallation **
***************************
If you want to remove the "VIA Bus Master PCI IDE driver" from your
system then you could remove the \VIAIDE\VIAIDE.SYS file and delete the
LOAD item from the STARTUP.NCF. After the reboot, the VIA Bus Master PCI
IDE Driver is not existing in your system.
c) OS/2 Driver
*************************
** Driver Installation **
*************************
Boot from the OS/2 hard disk and type the "DDINSTAL" command to install
the device driver.
C> DDINSTAL
After the "DDINSTAL", the original CONFIG.SYS will be renamed to
CONFIG.VIA and add two lines into the CONFIG.SYS.
BASEDEV=VIAIDE.ADD
BASEDEV=VIACD.FLT
************************
** Enable/Disable DMA **
************************
The default setting for the hard disk is DMA enabled and for the CD-ROM
is DMA disabled. You can enable or disable a single device by setting the
following parameters after VIAIDE.ADD in CONFIG.SYS.
/A:[0|1] Select primary or secondary channel.
/U:[0|1] Select master or slave device in the same channel.
/BM Enable DMA mode.
/!BM Disable DMA mode.
Example:
BASEDEV=VIAIDE.ADD /A:0 /U:0 /BM /A:1 /!BM
This setting will enable the DMA mode for the device connected
under primary channel master position and disable the DMA mode
for the entire secondary channel.
Note: The undefined position in the above example, ie. primary channel
slave position, is using the default setting.
***************************
** Driver Uninstallation **
***************************
You could remove the "VIA Bus Master PCI IDE Device Driver for OS/2" by
removing above two lines from the config.sys file and deleting the VIA
drivers named "VIAIDE.ADD" and "VIACD.FLT" located in the \OS2 directory
by manual operations. After the reboot, the "VIA Bus Master PCI IDE
Driver" is not existing in your system.
d) Windows 3.1 Driver
*************************
** Driver Installation **
*************************
Windows device driver could be installed by using the "SETUP.EXE"
setup program. It will add the following lines and one section to the
SYSTEM.INI.
[386Enh]
device=C:\WINDOWS\SYSTEM\INT13.386
device=C:\WINDOWS\SYSTEM\VIAIDE.386
VIRTUALHDIRQ=OFF
32BITDISKACCESS=ON
[VIAIDE]
SET_DMAM=Y,Y,Y,Y
************************
** Enable/Disable DMA **
************************
If you want to disable the DMA, you could run the SETUP.EXE again and
select the "Enable/Disable DMA" button to enable or disable DMA of those
drives. The parameter of the SET_DMAM will be modified in the SYSTEM.INI
to reflect those changes. For example, if you select to disable the DMA
of the PM drive then the SET_DMAM will be modified as
SET_DMAM=N,Y,Y,Y : DMA mode for PM, PS, SM, SS.
* PM - Primary Channel Master drive
PS - Primary Channel Slave drive
SM - Second Channel Master drive
SS - Second Channel Slave drive
***************************
** Driver Uninstallation **
***************************
You could remove the "VIA Bus Master PCI IDE Device Driver" by running
the "SETUP.EXE" again to uninstall the driver. All of the related setting
and driver will be removed from the system.
e) Windows 9x Driver
*************************
** Driver Installation **
*************************
Click the SETUP.EXE program and select "Install" button then it will
install the "VIA IDE Bus Master Driver" automatically on your Windows 9x
system. It will copy the driver to the \WINDOWS\SYSTEM\IOSUBSYS and set
the related registry tree.
************************
** Enable/Disable DMA **
************************
The default setting is the DMA mode. You could turn off the DMA setting
by running the VIADMATool.
***************************
** Driver Uninstallation **
***************************
You could remove the "VIA Bus Master PCI IDE Driver" by selecting the
"Uninstall" button. It will completely remove the driver from the sytsem.
f) Windows NT Driver
*************************
** Driver Installation **
*************************
Click the SETUP.EXE program and select "Install" button then it will
install the "VIA IDE Bus Master Driver" automatically on your Windows NT
system. It will copy the driver to the \WINNT\SYSTEM32\DRIVERS and set
the related registry tree.
************************
** Enable/Disable DMA **
************************
The default setting is the DMA mode. You could turn off the DMA setting
by running the VIADMATool.
***************************
** Driver Uninstallation **
***************************
You could remove the "VIA Bus Master PCI IDE Driver" by selecting the
"Uninstall" button. It will completely remove the driver from the sytsem.
g) Unix Driver
**********************
** Before You Start **
**********************
"VIA Bus Master PCI IDE Driver" is compressed to fix them in only one
floppy. Before you install the Unix Driver. You should uncompress it
first under the DOS prompt and only need to copy the \unix directory to
the floppy and follow the "Driver Installation" to setup your system.
*************************
** Driver Installation **
*************************
The following steps are used to convert the diskette prepared with DOS
format to a SCO UNIX "custom" installable diskette. You should prepare
an extra blank diskette, 1.2MB (5.25") or 1.44MB (3.5"), to
complete the installation.
1. Login to the SCO UNIX with "root" supper user account.
2. Insert our diskette into the 3.5" disk drive.
3. Type the following commands under the SCO UNIX prompt "#":
# doscp /dev/fd0135ds18:/unix/install /tmp
# sh /tmp/install
You could change the device name according to your system configuration.
You could also copy it to 5.25" diskette and install from it.
It will require you to insert a new blank diskette. After this "install"
command, you will get a SCO UNIX "custom" installable diskette.
Insert the "custom" installable diskette to the floppy drive and type :
# custom
If you have installed the IDE drives on the 17x channel, you should
execute the following command to attach those drives.
# /usr/bin/attachhd
************************
** Enable/Disable DMA **
************************
You could enable and disable the DMA operation by changing the
"/etc/conf/pack.d/vth1/space.c". The DMA_Supp[4] is defined for the
enable/disable parameters ordering by the PM, PS, SM and SS. After the
changing, you should relink the unix kernel and reboot again to active
the change.
int DMA_Supp[4] = {1,1,1,1};
* PM - Primary Channel Master drive
PS - Primary Channel Slave drive
SM - Second Channel Master drive
SS - Second Channel Slave drive
***************************
** Driver Uninstallation **
***************************
You could remove the "VIA Bus Master PCI IDE Device Driver" by using
# custom
command and by selecting the "Remove" item. After the reboot, the "VIA
Bus Master PCI IDE Device Driver" will be removed from the system.
h) Linux Driver
Please read the README.TXT in directory .\Linux .
9) File Size: (byte)
Root
│ _USER1 CAB 76,148
│ SETUP ISS 403
│ RELEASE TXT 17,686
│ _INST16 EX_ 280,100
│ _INST32I EX_ 316,937
│ _ISDEL EXE 8,192
│ _SETUP DLL 11,264
│ _SYS1 CAB 386,987
│ DATA TAG 136
│ DATA1 CAB 2,356
│ LANG DAT 352
│ LAYOUT BIN 353
│ OS DAT 419
│ SETUP BMP 375,478
│ SETUP EXE 59,392
│ SETUP INI 70
│ SETUP INS 90,805
│ SETUP LID 47
│ SETUP16 EXE 87,447
│ VIAIDE DDP 440
│ README TXT 18,598
│
├───DOS
│ VIAIDE SYS 6,536
│
├───NETWARE
│ VIAIDE DSK 9,367
│
├───OS2
│ OS2 EXE 34,304
│ VIACD FLT 24,096
│ VIAIDE ADD 69,485
│
├───WIN31
│ INT13 386 10,095
│ VIAIDE 386 28,410
│
├───WIN9x
│ VIADSK MPD 44,544
│ VIAIDE INF 2,141
│ VIAIDE VXD 9,116
│
├───WINNT
│ VIADSK SYS 45,216
│ VIAIDE INF 22,242
│
├───UNIX
│ INSTALL 1,915
│ README 1,539
│ VIAIDE TAR 110,080
│
├───Linux
│ README TXT 1,274
│
└───DMATOOL
SETDMA EXE 145,920
10) Bug Fixed:
******************
* Version 2.3.13 *
******************
WIN9x\ Fix LITE-ON 32X copy-compare failed problem.
Fix Vuego 24X can't detect CD-ROM problem. (Win95)
Fix LS-120 can't access problem.
Fix HP 7200I CD-Writer read/write failed problem.
Fix BTC CD0R/W boot failed.
Fix Pioneer 24X VCD play failed problem.(Win98)
Fix CREATIVE DVD can't play problem. (Win98)
WINNT\ Fix LITE-ON 32X copy-compare failed problems.
Fix HP 7200I CD-Writer read/write failed problem.
Fix SYQUEST SPARQ1A1 boot fail problem on the
second channel.
******************
* Version 2.3.14 *
******************
WIN9x\ Fix can't enable DMA mode.
******************
* Version 2.3.15 *
******************
WIN9x\ Fix HP COLORADO TAPE backup fail.
Fix RICOH MP7040A CD-R/RW detecting fail.
Fix BTC CD-R/RW boot fail.
Fix LS-120 access disk fail if booting without a disk
in the ls-120 drive.
Support turn off hard disks.
WinNT\ Fix HP COLORADO TAPE backup fail.
Fix Segate TapeStor 8GB TAPE backup fail.
******************
* Version 2.3.16 *
******************
Win9x\ Fix Mishikawa 24X CD-ROM DMA boot fail.
Enhance the system's stability.
Fix WD AC38400-32LK.
Support DMA utility (Ver 1.0).
Support CD-changer for Windows 95.
(Note: Please update atapchng.vxd from the Microsoft's Web Site.
http://support.microsoft.com/support/kb/articles/q194/9/36.asp)
WinNT\ Fix AOPEN DVD-ROM boot fail.
Support DMA utility (Ver 1.0).
******************
* Version 2.3.17 *
******************
WinNT\ Fix can't play VCD.
******************
* Version 2.3.18 *
******************
DOS\ Fix only can boot from primary channel master position.
Win9x\ Fix AIWA BOLT TD-AS10 tape format fail.
Fix MATSHITA DVD-ROM SR-8583-B DMA boot fail.
Fix LS-120 DMA boot fail.
Fix HP 8200i CD-RW write fail.
Fix Matshita SR-8583-B DVD-ROM boot fail.
Fix Creative IR CD-ROM remote function cause system hang.
WinNT\ Fix BTC CD-R/W DMA boot fail.
Fix EASY CD-PRO Write fail.
SCO UNIX\ Fix the driver will enter an infinite loop while detecting
secondary channel devices.
OS/2\ Rebuild from the new IBM's OS/2 DDK.
Linux\ Add README.TXT file.