SIMPLE = T / Data conforms to FITS standard BITPIX = 16 / Bits per data value NAXIS = 0 / Number of data axes EXTEND = T / File may contain standard extensions NEXTEND = 1 / Number of standard extensions GROUPS = F / Image is in group format DATE = '2007-12-20T14:51:04' / file creation date (YYYY-MM-DDThh:mm:ss UT) DATA DESCRIPTION KEYWORDS TELESCOP= 'FUSE ' / Telescope used to acquire data INSTRUME= 'FUV ' / Instrument in use (one of FUV, FESA, or FESB) ROOTNAME= 'D0230101030 ' / Rootname of the observation set (ppppttooeee) FILENAME= 'D02301010302asic4ttagfcal.fit' / Name of file FILETYPE= 'CALIBRATED EXTRACTED SPECTRUM' / Type of data found in data file EXP_STAT= 0 / Science data processing status (0=good) PROPOSAL INFORMATION PRGRM_ID= 'D023 ' / Program ID from data header TARG_ID = '01 ' / Target ID from data header SCOBS_ID= '01 ' / Observation ID from data header EXP_ID = '030 ' / Exposure ID from data header OBS_ID = '01 ' / Observation ID from proposal database PR_INV_L= 'Vennes ' / Last name of principal investigator PR_INV_F= 'Stephane ' / First name of principal investigator TARGET INFORMATION TARGNAME= 'WD0106-358 ' / Target name on proposal RA_TARG = 17.086542 / [deg] Right ascension of the target (J2000) DEC_TARG= -35.578139 / [deg] Declination of the target (J2000) APER_PA = 118.917297 / [deg] Position angle of Y axis (E of N) EQUINOX = 2000.0 / Equinox of celestial coordinate system ELAT = -3.896594172631E+01 / [deg] Ecliptic latitude ELONG = 3.591019785182E+02 / [deg] Ecliptic longitude GLAT = -8.081401231521E+01 / [deg] Galactic latitude GLONG = 2.808779507154E+02 / [deg] Galactic longitude OBJCLASS= 37 / Object class (modified IUE classification) SP_TYPE = 'DA ' / MK spectral type and luminosity class (or otherSRC_TYPE= 'PC ' / [P]oint or [E]xtended, [C]ontinuum, [E]mission VMAG = 14.75 / Target V magnitude EBV = 0.0 / Color excess E(B-V) Z = 0.0 / Redshift EFLX_950= 1.0E-13 / Expected flux at 950 A EFLX1050= 8.0E-13 / Expected flux at 1050 A EFLX1150= 8.0E-13 / Expected flux at 1150 A HIGH_PM = 'F ' / High proper motion target (T or F) MOV_TARG= 'F ' / [F]ixed or [M]oving target PCNTRATE= 464.0 / Expected count rate (sum of all channels) SUMMARY EXPOSURE INFORMATION DATEOBS = '2004-11-23' / UT date of start of exposure (yyyy-mm-dd) TIMEOBS = '04:50:53' / UT start time of exposure (hh:mm:ss) EXPSTART= 5.333220200231E+04 / Exposure start time (Modified Julian Date) EXPEND = 5.333221522099E+04 / Exposure end time (Modified Julian Date) EXPTIME = 1049. / [s] Total time after screening EXPENDC = 'SAA ' / End condition (ENDO; SAA; OCC; NGHT; ENDE) NEVENTS = 131381 / Number of events in raw data file RAWTIME = 1.142093750000E+03 / [s] Exposure duration of raw data file PLANTIME= 1464 / [s] Planned exposure time SUNANGLE= 111.346587316318 / [deg] Angle between sun and Z axis MOONANGL= 42.0839048340961 / [deg] Angle between moon and Z axis POLEANGL= 100.59331120759 / [deg] Angle between orbit pole and Z axis GEO_LONG= -129.143846748606 / [deg] Geocentric longitude GEO_LAT = -24.7924318806783 / [deg] Geocentric latitude MAG_LAT = -30.1690410063849 / [deg] Geomagnetic latitude MIN_LIMB= 73.8479384562727 / [deg] Minimum angle above Earth limb NBADEVNT= 23182 / Number of events deleted in screening NBADPHA = 1894 / Number of events deleted in PHA screening EXP_BAD = 93 / [s] Time lost to screening EXP_BRST= 93 / [s] Time lost to event bursts EXP_HV = 0 / [s] Time lost to low voltage/FIFO overflow EXP_JITR= 0 / [s] Time lost to jitter EXP_LIM = 0 / [s] Time with low limb angle EXP_SAA = 0 / [s] Time while in SAA EXPNIGHT= 433 / [s] Night time after screening V_GEOCEN= 0.986476877174316 / [km/s] Observed to geocentric velocity V_HELIO = -20.8380851372774 / [km/s] Geocentric to heliocentric velocity V_LSRDYN= -8.52042484283447 / [km/s] Heliocentric to dynamical LSR V_LSRSTD= -9.73174953460693 / [km/s] Heliocentric to standard solar LSR Geocentric and helocentric conversions are applied by the CALFUSE calibration pipeline. LSR conversion is not. SCIENCE INSTRUMENT CONFIGURATION INSTMODE= 'TTAG ' / Instrument mode (TTAG or HIST) DETECTOR= '2A ' / Detector for data in this file (1A, 1B, 2A, 2B)APERTURE= 'LWRS ' / Planned target aperture: HIRS, MDRS, LWRS, RFPTBRIT_OBJ= 'NO ' / Special configuration for bright-object obs APER_ACT= 'LWRS_SIC' / Extracted aperture in this file DET_MASK= 'AIC1 ' / Detector mask used NUM_APS = 1 / Number of apertures in use in the observation INITBINX= 1 / Initial binning in X coordinate INITBINY= 1 / Initial binning in Y coordinate SPECBINX= 1 / Current binning in X coordinate SPECBINY= 1 / Current binning in Y coordinate SIA_TBL = ' ' / SIA Table name NUM_HIST= 0 / Number of histograms in the observation INT_CAL = ' ' / Internal Calibration (STIM, NONE) FPSPLIT = 0 / Number of FP Split positions FPASXPOS= 348.889 / [microns] FPA SiC X position FPALXPOS= 349.095 / [microns] FPA LiF X position FPASZPOS= 59.7486 / [microns] FPA SiC Z position FPALZPOS= 145.009 / [microns] FPA LiF Z position MIRL1FOC= 0.000000 / [microns] LiF 1 mirror position MIRL2FOC= 0.000000 / [microns] LiF 2 mirror position MIRS1FOC= 0.000000 / [microns] SiC 1 mirror position MIRS2FOC= 0.000000 / [microns] SiC 2 mirror position TTPERIOD= 1.0 / [s] Time marker insertion period ENGSNAPT= 300 / [s] Engineering snapshot period TACQSEQ = 'ACQ-T-NOPKUP ' / Target acquisition sequence ROLLOFF = 10.0 / [Deg] Roll offset FES_BIN = 1 / FES binning factor (1;2;4;8) FES_FILT= 'CLR ' / FES filter wheel position: CLR=Clear, COL=ColorFES_TPOS= 'IN ' / FES target position: IN or OUT DETECTOR HV BIAS RANGES DET1HVAL= 164 / Det1 MCP A HV bias minimum setting DET1HVAH= 164 / Det1 MCP A HV bias maximum setting DET1HVBL= 161 / Det1 MCP B HV bias minimum setting DET1HVBH= 161 / Det1 MCP B HV bias maximum setting DET2HVAL= 148 / Det2 MCP A HV bias minimum setting DET2HVAH= 148 / Det2 MCP A HV bias maximum setting DET2HVBL= 126 / Det2 MCP B HV bias minimum setting DET2HVBH= 126 / Det2 MCP B HV bias maximum setting HV_FLAG = 4 / Detector voltage full throughout exposure ORBITAL EPHEMERIS EPCHTIMD= 53332. / Epoch time of parameters whole day (MJD) EPCHTIMF= 0.573331510000571 / Epoch time of parameters fraction of day (MJD) INCLINAT= 24.9793 / [deg] Inclination ECCENTRY= 0.0010123 / Eccentricity MEANANOM= 312.8675 / [deg] Mean anomaly ARGPERIG= 47.2662 / [deg] Argument of perigee RASCASCN= 103.4235 / [deg] RA of ascending node SEMIMAJR= 7131.47745184505 / [km] Semi-major axis MEANMOTN= 14.41562657 / [revs/day] Mean motion FDM2COEF= 1.09E-06 / First time derivative of mean motion / 2 SDM6COEF= 0. / Second time derivative of mean motion / 6 DRAGCOEF= -2.1595E-05 / B star drag coefficient PROPMODL= 'SGP4 ' / Propagation model SCIENCE DATA PROCESSING STEPS INIT_COR= 'COMPLETE' / Initialize processing DIGI_COR= 'COMPLETE' / Check digitizer values ELEC_COR= 'COMPLETE' / Detector dead-time correction IDS__COR= 'COMPLETE' / IDS dead-time correction FIFO_COR= 'COMPLETE' / FIFO overflow correction DEAD_COR= 'COMPLETE' / Apply all dead-time corrections THRM_COR= 'COMPLETE' / Thermal distortion correction RATE_COR= 'COMPLETE' / Count-rate Y distortion TMXY_COR= 'COMPLETE' / Temporal X and Y corrections GEOM_COR= 'COMPLETE' / Geometric distortion PHAH_COR= 'OMIT ' / Assign pulse heights to HIST data PHAX_COR= 'COMPLETE' / Low pulse-height X distortion (walk) ACTV_COR= 'COMPLETE' / Define detector active region LIMB_COR= 'COMPLETE' / Limb-angle screening SAA__COR= 'COMPLETE' / SAA screening VOLT_COR= 'COMPLETE' / Confirm detector voltage BRST_COR= 'COMPLETE' / Screen for bursts APER_COR= 'COMPLETE' / Screen for target out of aperture UGTI_COR= 'COMPLETE' / Set user good-time intervals FLAG_COR= 'COMPLETE' / Set individual photon flags GTI__COR= 'COMPLETE' / Determine good-time intervals TIME_COR= 'OMIT ' / Modify photon arrival times (HIST only) AIRG_COR= 'COMPLETE' / Flag events in airglow regions BPIX_COR= 'COMPLETE' / Flag events in bad-pixel regions PHA__COR= 'COMPLETE' / Pulse-height screening FIND_COR= 'COMPLETE' / Find spectra on detector YMOT_COR= 'COMPLETE' / Track motion of Y centroid GRAT_COR= 'COMPLETE' / Grating motion correction FPA__COR= 'COMPLETE' / FPA offset correction MIRR_COR= 'COMPLETE' / Mirror motion correction JITR_COR= 'COMPLETE' / Satellite jitter correction YCNT_COR= 'COMPLETE' / Y centroid of corrected data CHID_COR= 'COMPLETE' / Final channel assignment TCRT_COR= 'COMPLETE' / Calculate target count rate ASTG_COR= 'COMPLETE' / Astigmatism correction WAVE_COR= 'COMPLETE' / Assign wavelength to photons DOPP_COR= 'COMPLETE' / Heliocentric reference frame FLAT_COR= 'OMIT ' / Flat-field correction FLUX_COR= 'COMPLETE' / Flux-calibrate each photon COMB_COR= 'PERFORM ' / Generate observation-level spectrum SCIENCE DATA PROCESSING CALIBRATION FILES AEFF1CAL= 'aeff2a119.fit ' / Effective-area curve #1 AEFF2CAL= 'aeff2a120.fit ' / Effective-area curve #2 AIRG_CAL= 'airg2a004.fit ' / Geocoronal line locations ASTG_CAL= 'astg2a011.fit ' / Astigmatism correction BCHR_CAL= 'bchr2a003.fit ' / Background characteristics BKGD_CAL= 'bkgd2a018.fit ' / Background/scattered-light model BPM_CAL = 'D02301010302attagfbpm.fit' / Bad-pixel map for this exposure CHID_CAL= 'chid2a014.fit ' / Windows for spectral extraction DIGI_CAL= 'digi001.fit ' / Reference file for digitizer values ELEC_CAL= 'elec005.fit ' / Detector parameters FLAT1CAL= ' ' / Flat-field correction #1 FLAT2CAL= ' ' / Flat-field correction #2 GEOM_CAL= 'geom2a016.fit ' / X and Y geometric corrections GRAT_CAL= 'grat005.fit ' / Grating motions HSKP_CAL= 'D0230101030hskpf.fit' / Housekeeping data JITR_CAL= 'D0230101030jitrf.fit' / Spacecraft jitter data MIRR_CAL= 'mirr002.fit ' / Mirror motions PARM_CAL= 'parm2a015.fit ' / Master parameter file PHAH_CAL= 'phah2a001.fit ' / Pulse height map for HIST data PHAX_CAL= 'phax2a005.fit ' / Low-pulse-height X distortion QUAL_CAL= 'qual2a020.fit ' / Quality flag (bad pixel) map RATE_CAL= 'rate2a002.fit ' / Y stretch with count rate SAAC_CAL= 'saac004.fit ' / SAA contours for data screening SCRN_CAL= 'scrn2a015.fit ' / Parameters for data screening SPEC_CAL= 'spec002.fit ' / Spectrograph parameters STIM_CAL= 'stim2a001.fit ' / Default thermal drift parameters TMXY_CAL= 'tmxy2a002.fit ' / Temporal X and Y corrections VOLT_CAL= 'volt2a009.fit ' / Detector bias voltages and dates WAVE_CAL= 'wave2a023.fit ' / Wavelength calibration WGTS_CAL= 'wgts2a011.fit ' / Pixel weights for extraction WORM1CAL= ' ' / Worm correction #1 WORM2CAL= ' ' / Worm correction #2 SCIENCE DATA PROCESSING KEYWORDS OPUSVERS= '2.7 ' / FUSE OPUS version number CF_VERS = '3.2.1 ' / CALFUSE pipeline version number HKEXISTS= 'yes ' / Housekeeping data file exists DAYNIGHT= 'BOTH ' / Use only DAY, NIGHT, or BOTH BRITLIMB= 15. / [deg] Bright limb avoidance angle DARKLIMB= 10. / [deg] Dark limb avoidance angle ORBPERID= 5989. / [s] Estimate of orbital period PHALOW = 3 / Pulse height screening low limit PHAHIGH = 23 / Pulse height screening high limit OPT_EXTR= 8 / Number of optimal extraction iterations STIM_L_X= 243.0019 / X centroid of left stim pulse STIM_L_Y= 619.3701 / Y centroid of left stim pulse STIM_R_X= 16116.59 / X centroid of right stim pulse STIM_R_Y= 627.4084 / Y centroid of right stim pulse FPADXLIF= -26.70765 / [pixels] Correction for FPA position (LIF) FPADXSIC= -26.65425 / [pixels] Correction for FPA position (SIC) WPC = 0.013 / [A] Wavelength increment per pixel W0 = 909.997 / [A] Wavelength of first pixel DET_DEAD= 1.001662 / Mean detector deadtime correction factor IDS_DEAD= 1. / Mean IDS deadtime correction factor TOT_DEAD= 1.001662 / TOTAL deadtime correction factor MEASURED SPECTRAL CENTROIDS YCENT1 = 679.8278 / [pixels] Y centroid of LIF HIRS spectrum YCENT2 = 560.9279 / [pixels] Y centroid of LIF MDRS spectrum YCENT3 = 796.5941 / [pixels] Y centroid of LIF LWRS spectrum YCENT5 = 282.821 / [pixels] Y centroid of SIC HIRS spectrum YCENT6 = 174.1211 / [pixels] Y centroid of SIC MDRS spectrum YCENT7 = 403.6905 / [pixels] Y centroid of SIC LWRS spectrum YQUAL1 = 'MEDIUM ' / Quality of Y centroid value (LIF HIRS) YQUAL2 = 'MEDIUM ' / Quality of Y centroid value (LIF MDRS) YQUAL3 = 'HIGH ' / Quality of Y centroid value (LIF LWRS) YQUAL5 = 'MEDIUM ' / Quality of Y centroid value (SIC HIRS) YQUAL6 = 'MEDIUM ' / Quality of Y centroid value (SIC MDRS) YQUAL7 = 'HIGH ' / Quality of Y centroid value (SIC LWRS) BACKGROUND SAMPLE REGIONS BKGD_NUM= 3 / Number of background regions specified BKG_MIN0= 82 / [pixels] bkgd sample region 0 - lower limit BKG_MIN1= 500 / [pixels] bkgd sample region 1 - lower limit BKG_MIN2= 890 / [pixels] bkgd sample region 2 - lower limit BKG_MIN3= 0 / [pixels] bkgd sample region 3 - lower limit BKG_MIN4= 0 / [pixels] bkgd sample region 4 - lower limit BKG_MIN5= 0 / [pixels] bkgd sample region 5 - lower limit BKG_MIN6= 0 / [pixels] bkgd sample region 6 - lower limit BKG_MIN7= 0 / [pixels] bkgd sample region 7 - lower limit BKG_MAX0= 335 / [pixels] bkgd sample region 0 - upper limit BKG_MAX1= 720 / [pixels] bkgd sample region 1 - upper limit BKG_MAX2= 905 / [pixels] bkgd sample region 2 - upper limit BKG_MAX3= 0 / [pixels] bkgd sample region 3 - upper limit BKG_MAX4= 0 / [pixels] bkgd sample region 4 - upper limit BKG_MAX5= 0 / [pixels] bkgd sample region 5 - upper limit BKG_MAX6= 0 / [pixels] bkgd sample region 6 - upper limit BKG_MAX7= 0 / [pixels] bkgd sample region 7 - upper limit ENGINEERING KEYWORDS THERMCON= 'ON ' / Thermal control flag FESSRC = 'FES A ' / Source of FES dump data FESCENT = 'FES A ' / Source of FES centroid data GMODE = 'IDENTIFIED_TRACKING ' / Guidance mode TRACKON = 'OFF ' / Guide star tracking on ATCMDATT= 'AT COMMANDED ATTITUD ' / At commanded attitude Segment 2A Counters C2ASIC_B= 15806614 / SIC counter at beginning of integration C2ASIC_E= 15817901 / SIC counter at end of integration C2ALIF_B= 3455604 / LIF counter at beginning of integration C2ALIF_E= 3553610 / LIF counter at end of integration C2ADE_B = 7371651 / Digitized events counter at beginning of integrC2ADE_E = 7503145 / Digitized events counter at end of integration C2AAS_B = 15102288 / Autonomous shutdown (SAA) counter at beginning C2AAS_E = 15103939 / Autonomous shutdown (SAA) counter at end of intC2AFE_B = 14374338 / Fast event counter at beginning of integration C2AFE_E = 14514324 / Fast event counter at end of integration C2AFE_CR= 122.579681 / Count rate from fast event counter Active Image Counters CTIME_B = 5.333220200231E+04 / [MJD] Time of first engineering snapshot CTIME_E = 5.333221521991E+04 / [MJD] Time of last engineering snapshot C1AAI_B = 13352779 / Seg 1A at beginning C1AAI_E = 13461970 / Seg 1A at end of integration C1BAI_B = 5265892 / Seg 1B at beginning C1BAI_E = 5359945 / Seg 1B at end of integration C2AAI_B = 7353841 / Seg 2A at beginning C2AAI_E = 7485335 / Seg 2A at end of integration C2BAI_B = 8938058 / Seg 2B at beginning C2BAI_E = 9014611 / Seg 2B at end of integration Detector 2 parameters DET2ETMP= 24.2721 / DET2 electronics temperature DET2PTMP= 18.6787 / DET2 Baseplate temperature DET2ASCL= 65.0 / DET2 segment A Time (X) image scale factor DET2BSCL= 78.0 / DET2 segment B Time (X) image scale factor DET2AXOF= 107.0 / DET2 segment A Time (X) image position offset DET2BXOF= 80.0 / DET2 segment B Time (X) image position offset DET2TEMP= 18.4255 / DET2 Detector temperature DET2HVMT= 23.7661 / DET2 High Voltage Module temperature DET2HVFT= 20.9761 / DET2 High Voltage Filter temperature DET2AMAT= 26.7594 / DET2 segment A Amplifier temperature DET2AMBT= 27.4819 / DET2 segment B Amplifier temperature DET2TDAT= 20.561899 / DET2 TDC A temperature DET2TDBT= 20.9761 / DET2 TDC B temperature DET2HVA = 44.0 / DET2 MCP A Bias Current DET2HVB = 39.0 / DET2 MCP B Bias Current DET2AUCT= 228.0 / DET2 TDC-A Upper Charge Threshold setting DET2BUCT= 228.0 / DET2 TDC-B Upper Charge Threshold setting DET2ABWK= 113.0 / DET2 TDC-A Begin CFD Walk setting DET2BBWK= 111.0 / DET2 TDC-B Begin CFD Walk setting DET2AEWK= 114.0 / DET2 TDC-A End CFD Walk setting DET2BEWK= 112.0 / DET2 TDC-B End CFD Walk setting DET2ABSL= 228.0 / DET2 TDC-A charge Baseline threshold setting DET2BBSL= 228.0 / DET2 TDC-B charge Baseline threshold setting DET2ALCT= 6.0 / DET2 TDC-A Lower Charge Threshold setting DET2BLCT= 7.0 / DET2 TDC-B Lower Charge Threshold setting DET2ALTT= 159.0 / DET2 TDC-A Lower Time Threshold setting DET2BLTT= 149.0 / DET2 TDC-B Lower Time Threshold setting DET2HVGR= 1.0 / DET2 Grid High Voltage Status DET2HVPW= 1.0 / DET2 Bias High Voltage Status DET2STIM= 'OFF ' / DET2 Stimulation Lamp Status ARCHIVE SEARCH KEYWORDS BANDWID = 100.009 / [Angstroms] Bandwidth of the data CENTRWV = 960.0015 / [Angstroms] Central wavelength of the data WAVEMIN = 909.997 / [Angstroms] Minimum wavelength of the data WAVEMAX = 1010.006 / [Angstroms] Maximum wavelength of the data PLATESC = -0.6335 / [arcsec/pixel] Plate scale ASSOCIATION KEYWORDS ASN_ID = 'D0230101000 ' / Unique identifier assigned to association ASN_TAB = 'D0230101000asn.fit ' / Name of the association table ASN_MTYP= 'EXPOSURE ' / Role of the exposure in the association END XTENSION= 'BINTABLE' / binary table extension BITPIX = 8 / 8-bit bytes NAXIS = 2 / 2-dimensional binary table NAXIS1 = 26 / width of table in bytes NAXIS2 = 7694 / number of rows in table PCOUNT = 0 / size of special data area GCOUNT = 1 / one data group (required keyword) TFIELDS = 7 / number of fields in each row TTYPE1 = 'WAVE ' / label for field 1 TFORM1 = '1E ' / data format of field: 4-byte REAL TUNIT1 = 'ANGSTROMS' / physical unit of field TTYPE2 = 'FLUX ' / label for field 2 TFORM2 = '1E ' / data format of field: 4-byte REAL TUNIT2 = 'ERG CM^-2 S^-1 ANG^-1' / physical unit of field TTYPE3 = 'ERROR ' / label for field 3 TFORM3 = '1E ' / data format of field: 4-byte REAL TUNIT3 = 'ERG CM^-2 S^-1 ANG^-1' / physical unit of field TTYPE4 = 'COUNTS ' / label for field 4 TFORM4 = '1J ' / data format of field: 4-byte INTEGER TUNIT4 = 'COUNTS ' / physical unit of field TTYPE5 = 'WEIGHTS ' / label for field 5 TFORM5 = '1E ' / data format of field: 4-byte REAL TUNIT5 = 'COUNTS ' / physical unit of field TTYPE6 = 'BKGD ' / label for field 6 TFORM6 = '1E ' / data format of field: 4-byte REAL TUNIT6 = 'COUNTS ' / physical unit of field TTYPE7 = 'QUALITY ' / label for field 7 TFORM7 = '1I ' / data format of field: 2-byte INTEGER TUNIT7 = 'UNITLESS' / physical unit of field EXTNAME = 'SPECTRUM' / name of this binary table extension COMMENT COMMENT RAW COUNTS = COUNTS COMMENT TARGET COUNTS = WEIGHTS - BKGD COMMENT TARGET FLUX = TARGET COUNTS * HC / LAMBDA / AEFF / EXPTIME / WPC COMMENT END Dc╧ DcÇñ Dcüy DcéN Dcâ# Dcâ° Dcä═ Dcàó Dcåw DcçL Dcê! Dcê÷ Dcë╦ Dcèá Dcïu DcîJ Dcì Dcì⌠ DcÄ╔ DcÅ₧ DcÉs DcæH DcÆ DcÆ≥ Dcô╟ Dcö£ Dcòq DcûF Dcù Dcù≡ Dcÿ┼ DcÖÜ DcÜo Dc¢D Dc£ Dc£ε Dc¥├ Dc₧ÿ Dcƒm DcáB Dcí Dcí∞ Dcó┴ Dcúû Dcñk DcÑ@ Dcª DcªΩ Dcº┐ Dc¿ö Dc⌐i Dc¬> Dc½ Dc½Φ Dc¼╜ Dc¡Æ Dc«g Dc»< Dc░ Dc░µ Dc▒╗ Dc▓É Dc│e Dc┤9 Dc╡ Dc╡π Dc╢╕ Dc╖ì Dc╕b Dc╣7 Dc║ Dc║ß Dc╗╢ Dc╝ï Dc╜` Dc╛5 Dc┐
