home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Columbia Kermit
/
kermit.zip
/
archives
/
k10mit-135.tar.gz
/
k10mit-135.tar
/
k10mit-135
/
k10com.req
< prev
next >
Wrap
Text File
|
2001-06-19
|
6KB
|
205 lines
!++
! FACILITY:
! KERMIT-32/36
!
! ABSTRACT:
! This file contains the common definitions for KERMIT-32 and KERMIT-36.
!
! ENVIRONMENT:
! User mode
!
! AUTHOR: Robert C. McQueen, CREATION DATE: 24-January-1983
!
! MODIFIED BY:
!
! 13-June-83 Nick Bush
! Change maximum record length for RMS records to be 4096 instead
! of 256.
!
! 3-Jan-1984 Nick Bush
! Add FNM_xxx symbols for type of file specification to send.
!
! 6-July-1984 Nick Bush
! Increase MAX_MSG so that it includes space for the start-of-packet
! and end-of-line characters, plus a little slop, just in case.
!
! 3.2.074 By: Robert McQueen On: 11-March-1986
! Put MAX_MSG back the way it was.
!
! 17-June-1989 Dan Norstedt
! Adjust MAX_MSG for Extended Length packets
!--
%SBTTL 'Table of Contents'
%SBTTL 'Symbol definitions -- Routine calls'
!
! EQUATED SYMBOLS:
!
!
! Function types passed to FILE_OPEN routine.
!
LITERAL
FNC_READ = 0, ! Open for reading
FNC_WRITE = 1; ! Open for writing
!
! File types used
!
LITERAL
FILE_ASC = 1, ! ASCII files (SEVEN-BIT)
FILE_BIN = 2, ! Binary files. (EIGHT-BIT)
FILE_BLK = 3, ! Block transfer of files
FILE_FIX = 4; ! Fixed 512 byte records Files-11
! (for PRO/KERMIT .TSK files)
!
! File naming forms
!
! Note: Only FNM_NORMAL should be a true value (have LSB on). Other
! values must be false, or the name will be normalized.
!
GLOBAL LITERAL
FNM_NORMAL = 1, ! Normal form file names
FNM_FULL = 2, ! Complete file names
FNM_UNTRAN = 4; ! Untranslated (but not full) names
!
! Parity types
!
GLOBAL LITERAL
PR_MIN = 0, ! Min offset
PR_NONE = 0, ! No parity
PR_MARK = 1, ! Mark parity
PR_EVEN = 2, ! Even parity
PR_ODD = 3, ! Odd parity
PR_SPACE = 4, ! Space
PR_MAX = 4; ! Max offset
!
! DO_GENERIC commands
!
! Generic commands that we can send
!
GLOBAL LITERAL
GC_MIN = 1, ! Min command
GC_EXIT = 1, ! EXIT command
GC_DIRECTORY = 2, ! List DIRECTORY command
GC_DISK_USAGE = 3, ! Display disk usage summary
GC_DELETE = 4, ! DELETE file command
GC_TYPE = 5, ! TYPE file command
GC_HELP = 6, ! Display HELP information
GC_LOGOUT = 7, ! LOGOUT command
GC_LGN = 8, ! LOGIN command
GC_CONNECT = 9, ! CONNECT (CWD) command
GC_RENAME =10, ! RENAME file command
GC_COPY =11, ! COPY file command
GC_WHO =12, ! WHO is logged in (Finger)
GC_SEND_MSG =13, ! Send a message
GC_STATUS =14, ! Get status of server
GC_COMMAND =15, ! Perform host command
GC_KERMIT =16, ! Perform Kermit command
GC_JOURNAL =17, ! Perform journal functions
GC_VARIABLE =18, ! Set/get variable value
GC_PROGRAM =19, ! Run program and pass command
GC_MAX =19; ! Max command
!++
!The following denotes the type of communications line that is being used.
!--
GLOBAL LITERAL
DP_FULL = 0, ! Full duplex line
DP_HALF = 1; ! Half duplex line
!++
! The following are the various checksum types that are allowed.
!--
GLOBAL LITERAL
CHK_1CHAR = %C'1', ! One character checksums
CHK_2CHAR = %C'2', ! Two character checksums
CHK_CRC = %C'3'; ! Three character CRC.
%SBTTL 'Character definitions'
!
! Character definitions
!
LITERAL
CHR_NUL = %O'000', ! Null
CHR_SOH = %O'001', ! Start of header
CHR_STX = %O'002', ! Start of text
CHR_ETX = %O'003', ! End of text
CHR_EOT = %O'004', ! End of transmission
CHR_ENQ = %O'005', ! Enquiry (WRU "Who are you?")
CHR_ACK = %O'006', ! Acknowledge
CHR_BEL = %O'007', ! Bell
CHR_BS = %O'010', ! Backspace
CHR_TAB = %O'011', ! Horizontal tab
CHR_LFD = %O'012', ! Line feed
CHR_VTB = %O'013', ! Vertical tab
CHR_FFD = %O'014', ! Form feed
CHR_CRT = %O'015', ! Carriage return
CHR_SO = %O'016', ! Shift out
CHR_SI = %O'017', ! Shift in
CHR_DLE = %O'020', ! Data link escape
CHR_DC1 = %O'021', ! Device control 1 (also XON)
CHR_DC2 = %O'022', ! Device control 2 (also TAPE, AUX ON)
CHR_DC3 = %O'023', ! Device control 3 (also XOFF)
CHR_DC4 = %O'024', ! Device control 4 (also AUX OFF)
CHR_NAK = %O'025', ! Negative acknowledge
CHR_SYN = %O'026', ! Synchronous idle (SYNC)
CHR_ETB = %O'027', ! End of transmission block
CHR_CAN = %O'030', ! Cancel
CHR_EM = %O'031', ! End of medium
CHR_SUB = %O'032', ! Substitute
CHR_ESC = %O'033', ! Escape
CHR_FS = %O'034', ! File separator
CHR_GS = %O'035', ! Group separator
CHR_RS = %O'036', ! Record separator
CHR_US = %O'037', ! Unit separator
CHR_CTL_A = %O'001', ! Control-A
CHR_CTL_B = %O'002', ! Control-B
CHR_CTL_C = %O'003', ! Control-C
CHR_CTL_D = %O'004', ! Control-D
CHR_CTL_E = %O'005', ! Control-E
CHR_CTL_F = %O'006', ! Control-F
CHR_CTL_G = %O'007', ! Control-G
CHR_CTL_H = %O'010', ! Control-H
CHR_CTL_I = %O'011', ! Control-I
CHR_CTL_J = %O'012', ! Control-J
CHR_CTL_K = %O'013', ! Control-K
CHR_CTL_L = %O'014', ! Control-L
CHR_CTL_M = %O'015', ! Control-M
CHR_CTL_N = %O'016', ! Control-N
CHR_CTL_O = %O'017', ! Control-O
CHR_CTL_P = %O'020', ! Control-P
CHR_CTL_Q = %O'021', ! Control-Q
CHR_CTL_R = %O'022', ! Control-R
CHR_CTL_S = %O'023', ! Control-S
CHR_CTL_T = %O'024', ! Control-T
CHR_CTL_U = %O'025', ! Control-U
CHR_CTL_V = %O'026', ! Control-V
CHR_CTL_W = %O'027', ! Control-W
CHR_CTL_X = %O'030', ! Control-X
CHR_CTL_Y = %O'031', ! Control-Y
CHR_CTL_Z = %O'032', ! Control-Z
CHR_SP = %C' ', ! Space
CHR_DEL = %O'177', ! Delete
CHR_ESCAPE = %O'035', ! Connect escape character
CHR_SIZE = 8; ! Character size
!! Constants
!
LITERAL
TRUE = (0 EQL 0), ! Value of true
FALSE = (0 NEQ 0), ! Value of FALSE.
MAX_FILE_NAME = 132, ! Maximum length of a file spec
MAX_REC_LENGTH = 4096, ! Maximum record length for us
INIT_DELAY = 5; ! Initial delay time
GLOBAL LITERAL
MAX_MSG = 1002; ! 96; ! Maximum message length