home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
ftp.tcs3.com
/
ftp.tcs3.com.tar
/
ftp.tcs3.com
/
DRIVERS
/
Video
/
Diamond
/
Win95
/
95Mach64
/
Utilities.ZIP
/
DRVRNOTE.LZH
/
ONLINE.3DS
next >
Wrap
Text File
|
1995-07-06
|
3KB
|
90 lines
3D Studio Installation Notes
***********************************************************************
READ THIS FILE COMPLETELY BEFORE ATTEMPTING TO USE THIS PRODUCT !
You must run QUICK SETUP from the Main Menu and select an appropriate
monitor type, prior to installing the 3D Studio Display Driver.
***********************************************************************
1) Make sure 3D Studio has already been installed on your hard drive.
2) To complete the install successfully, you will require the following
information:
a) The full path name of the 3D Studio directory.
b) The batch file is called ADI3DS.BAT.
3) From the "Drivers Installation" menu, select 3D Studio.
4) When INSTALL has completed copying all necessary files, exit the
program.
5) Go to the directory where the 386 Protected mode driver files are
installed, and run ADI3DS.BAT.
6) Go to the 3D Studio base directory and delete 3DADI.CFG.
7) For 3D Studio version 1.0:
a) Type "EDIT 3DS.SET", this will display the 3DS.SET file in the
DOS editor.
b) Use the Search function <Alt> S and Find to locate and change
the following entries:
Old line 123 (approx.):
DEFAULT-DISPLAY = "vga320x200"
New line 123 (approx.):
DEFAULT-DISPLAY = "RCPADI"
Old line 138 (approx.):
;MAIN-DISPLAY = RCPADI
New line 138 (approx.): (remove the ";")
MAIN-DISPLAY = RCPADI
Old line 145 (approx.):
;MATERIAL-DISPLAY = RCPADI
New line 145 (approx.): ( remove the ";")
MATERIAL-DISPLAY = RCPADI
c) Launch 3D Studio by typing 3DS.
d) Configure the screens that appear to the desired mode.
8) For 3D Studio version 2.0:
a) Type "EDIT 3DS.SET", this will display the 3DS.SET file in the
DOS editor.
b) Use the Search function <Alt> S and Find to locate and change
the following entries:
Old line 231 (approx.):
RENDER-DISPLAY = "vga320X200"
New line 231 (approx.):
RENDER-DISPLAY = "RCPADI"
Old line 245 (approx.):
;MAIN-DISPLAY = RCPADI
New line 245 (approx.): (remove the ";")
MAIN-DISPLAY = RCPADI
Old line 264 (approx.):
;MATERIAL-DISPLAY = RCPADI
New line 264 (approx.): ( remove the ";")
MATERIAL-DISPLAY = RCPADI
c) Launch 3D Studio by typing 3DS.
d) Configure the screens that appear to the desired mode.
9) For 3D Studio version 3.0 and 4.0:
a) Type "3DS VIBCFG", this will display the 3D Studio Inline
Video Driver Configuration program.
b) Using the TAB, ARROW and ENTER keys, set Main-Display, Materials-
Display and Render-Display fields to RCPADI.
c) Press OK to continue.
d) Configure the screens that appear to the desired mode.
10) For further details, please see MANUAL.TXT and README.DLD after
installing the driver. The files will be copied to the 3D Studio
sub-directory specified during installation.