home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
ftp.tcs3.com
/
ftp.tcs3.com.tar
/
ftp.tcs3.com
/
DRIVERS
/
Setup_Utils
/
Gateway
/
GATEISA
/
34FCFG.ZIP
/
!USC0340.CFG
Wrap
Text File
|
1992-12-16
|
7KB
|
295 lines
;************************************************************************
;
; UltraStor VESA VL-BUS MASTER Host Adapter (ULTRA 34F)
;
; UltraStor ULTRA 34F EISA configuration file
; Version: 1.00
; Date : December 16, 1992
;
;************************************************************************
;------------------------------------------------------------------------
; Board Identification Block
;------------------------------------------------------------------------
BOARD
ID = "USC0340"
NAME = "UltraStor - ULTRA 34F VESA VL-BUS Host Adapter"
MFR = "UltraStor"
CATEGORY = "MSD" ;Mass Storage Device
SLOT = ISA16 ;For ISA-16 bit slot
LENGTH = 210
AMPERAGE = 800
SKIRT = NO
READID = NO
COMMENTS = "ULTRA 34F is a high performance SCSI host adapter interfacing
the VL-VESA local bus supporting up to 7 SCSI devices. A high speed
32 bit micro-processor provides the local intelligence for command
processing.\n\n
The ULTRA 34F features:\n
. VL-VESA Local Bus BUS Master data transfers.\n
. Low overhead Command Processing.\n
. MailBox Command Protocol, Command Chaining,\n
Command Queuing, and Scatter/Gather.\n
. Coexits with other disk controllers / H/A in a system.\n
. SCSI Sync/Async, Disconnect, and Multi Media Device support.\n"
;------------------------------------------------------------------------
; Initialization Information Block
;------------------------------------------------------------------------
;************** Jumper Configuration Statement Block ******************
JUMPER(3) = 8
NAME = "JP3"
JTYPE = PAIRED
VERTICAL = NO
REVERSE = YES
INITVAL = LOC(1-8) xxxxxxxx
FACTORY = LOC(1-8) 00010010
LABEL = LOC(1-8) "SpinUp Sequen" "Sync Nego" "6 5" "8 7" "Parity Ctrl"
"12 11" "14 13" "16 15"
COMMENTS =
"\tInterrupt Channel:\n
\tIRQ 5-6 7-8\n
\t15 OUT OUT\n
\t14 OUT IN\n
\t11 IN OUT\n
\t10 IN IN\n\n
\tBIOS Address Setting:\n
\tAddress 11-12 13-14 15-16\n
\tDisable OUT OUT OUT\n
\tC4000 OUT OUT IN\n
\tC8000 OUT IN OUT\n
\tCC000 OUT IN IN\n
\tD0000 IN OUT OUT\n
\tD4000 IN OUT IN\n
\tD8000 IN IN OUT\n
\tDC000 IN IN IN"
JUMPER(4) = 8
NAME = "JP4"
JTYPE = PAIRED
VERTICAL = NO
REVERSE = YES
INITVAL = LOC(1-8) xxxxxxxx
FACTORY = LOC(1-8) 10001111
LABEL = LOC(1-8) "2 1" "4 3" "NoDrvsSupp" "8 7" "10 9"
"12 11" "14 13" "16 15"
COMMENTS =
"\tMailBox Port I/O Address:\n
\tBase Addr 1-2 3-4\n
\t 330H OUT OUT\n
\t 340H OUT IN \n
\t 230H IN OUT\n
\t 130H IN IN \n\n
\tMapping Mode:\n
\tMapping 7-8 9-10\n
\t16Hd/63Sec OUT OUT\n
\t64Hd/32Sec OUT IN\n
\t64Hd/63Sec IN OUT\n\n
\tH/A SCSI ID:\n
\tID 11-12 13-14 15-16\n
\t0 OUT OUT OUT\n
\t1 OUT OUT IN\n
\t2 OUT IN OUT\n
\t3 OUT IN IN\n
\t4 IN OUT OUT\n
\t5 IN OUT IN\n
\t6 IN IN OUT\n
\t7 IN IN IN"
;***********************************************************************
GROUP = "UltraStor ULTRA 34F Disk Controller"
TYPE = "MSD"
FUNCTION = "Host Adapter Options"
TYPE = "HDKCTL"
SUBFUNCTION = "Interrupt Selection"
CHOICE = "IRQ 14"
FREE
IRQ = 14
SHARE = NO
TRIGGER = EDGE
INIT = JUMPER(3) LOC(3 4) 01
CHOICE = "IRQ 15"
FREE
IRQ = 15
SHARE = NO
TRIGGER = EDGE
INIT = JUMPER(3) LOC(3 4) 00
CHOICE = "IRQ 11"
FREE
IRQ = 3
SHARE = NO
TRIGGER = EDGE
INIT = JUMPER(3) LOC(3 4) 10
CHOICE = "IRQ 10"
FREE
IRQ = 10
SHARE = NO
TRIGGER = EDGE
INIT = JUMPER(3) LOC(3 4) 11
SUBFUNCTION = "BIOS Address Selection"
CHOICE = "C8000h"
FREE
MEMORY = 16K
ADDRESS = 0C8000h
MEMTYPE = OTH
WRITABLE = YES
SHARE = NO
SIZE = BYTE
CACHE = YES
INIT = JUMPER(3) LOC(6 7 8) 010
CHOICE = "C4000h"
FREE
MEMORY = 16K
ADDRESS = 0C4000h
MEMTYPE = OTH
WRITABLE = YES
SHARE = NO
SIZE = BYTE
CACHE = YES
INIT = JUMPER(3) LOC(6 7 8) 001
CHOICE = "CC000h"
FREE
MEMORY = 16K
ADDRESS = 0CC000h
MEMTYPE = OTH
WRITABLE = YES
SHARE = NO
SIZE = BYTE
CACHE = YES
INIT = JUMPER(3) LOC(6 7 8) 011
CHOICE = "D0000h"
FREE
MEMORY = 16K
ADDRESS = 0D0000h
MEMTYPE = OTH
WRITABLE = YES
SHARE = NO
SIZE = BYTE
CACHE = YES
INIT = JUMPER(3) LOC(6 7 8) 100
CHOICE = "D4000h"
FREE
MEMORY = 16K
ADDRESS = 0D4000h
MEMTYPE = OTH
WRITABLE = YES
SHARE = NO
SIZE = BYTE
CACHE = YES
INIT = JUMPER(3) LOC(6 7 8) 101
CHOICE = "D8000h"
FREE
MEMORY = 16K
ADDRESS = 0D8000h
MEMTYPE = OTH
WRITABLE = YES
SHARE = NO
SIZE = BYTE
CACHE = YES
INIT = JUMPER(3) LOC(6 7 8) 110
CHOICE = "DC000h"
FREE
MEMORY = 16K
ADDRESS = 0DC000h
MEMTYPE = OTH
WRITABLE = YES
SHARE = NO
SIZE = BYTE
CACHE = YES
INIT = JUMPER(3) LOC(6 7 8) 111
CHOICE = "Disable"
FREE
INIT = JUMPER(3) LOC (6 7 8) 000
SUBFUNCTION = "Number of Hard Drives Supported"
CHOICE = "Maximum 2 hard drives"
FREE
INIT = JUMPER(4) LOC(3) 0
CHOICE = "Maximum 7 hard drives"
FREE
INIT = JUMPER(4) LOC(3) 1
SUBFUNCTION = "Drive Mapping Mode Selection"
COMMENTS = "Select Drive Mapping Mode.\n
64 HD/32 SCTR : Used by most SCSI H/A for compatibility.\n
16 HD/63 SCTR : Required if ISA mode is enabled.\n
64 HD/63 SCTR : Required if the drive capacity is > 1.2 Gbyte."
CHOICE = "64 HD/32 SCTR"
FREE
INIT = JUMPER(4) LOC(4 5) 01
CHOICE = "16 HD/63 SCTR"
FREE
INIT = JUMPER(4) LOC(4 5) 00
CHOICE = "64 HD/63 SCTR"
FREE
INIT = JUMPER(4) LOC(4 5) 10
CHOICE = "64 HD/32 SCTR"
FREE
INIT = JUMPER(4) LOC(4 5) 11
SUBFUNCTION = "Host Adapter SCSI ID"
COMMENTS = "Select ULTRA 34F SCSI Host Adapter ID."
CHOICE = "7"
FREE
INIT = JUMPER(4) LOC(6 7 8) 111
CHOICE = "6"
FREE
INIT = JUMPER(4) LOC(6 7 8) 110
CHOICE = "5"
FREE
INIT = JUMPER(4) LOC(6 7 8) 101
CHOICE = "4"
FREE
INIT = JUMPER(4) LOC(6 7 8) 100
CHOICE = "3"
FREE
INIT = JUMPER(4) LOC(6 7 8) 011
CHOICE = "2"
FREE
INIT = JUMPER(4) LOC(6 7 8) 010
CHOICE = "1"
FREE
INIT = JUMPER(4) LOC(6 7 8) 001
CHOICE = "0"
FREE
INIT = JUMPER(4) LOC(6 7 8) 000
ENDGROUP ;(Host Adapter)