home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
ftp.tcs3.com
/
ftp.tcs3.com.tar
/
ftp.tcs3.com
/
DRIVERS
/
Network
/
LinkSYS
/
LNE100TX
/
lne100txv42.exe
/
NETWARE
/
SERVER
/
NW50
/
README.TXT
< prev
Wrap
Text File
|
2000-01-27
|
2KB
|
61 lines
==============================================================
Linksys LNE100TX Fast Ethernet Adapter(LNE100TX v4)
NetWare 32-bit ODI Driver Installation
==============================================================
Copyright (C) 2000 Linksys.
All rights reserved.
NetWare DOS ODI Server Driver Installation (NetWare 5.0)
=========================================================
Requirements:
-------------
Linksys LNE100TX(v4) Fast Ethernet Adapter Driver Disk (LNE100TX.LAN)
Installation Procedure:
-----------------------
1. Insert the Driver Disk into drive A and check the contents
of subdirectory NETWARE\SERVER\NW50
It should contain the following file :
LNE100.LAN Novell NetWare V5.0 Server Driver for
Linksys LNE100TX Fast Ethernet adapter(LNE100TX v4)
LNE100.LDI Novell NetWare V5.0 Server Driver Installation
Information File.
AUTOEXEC.NCF
2. At the NetWare prompt (indicated by the Server name),
run the NWCONFIG.NLM program by typing:
server name: LOAD NWCONFIG <Enter>
3. Select "Maintenance/Selective Install" and press <Enter>.
4. Select "LAN Driver Options (Configure/Load/...)"
and press <Enter>.
5. Press the <Ins> key to specify other drivers to install.
6. Press <F3> and specify the driver path (A:\ or
A:\NETWARE\SERVER\NW50) and press <Enter>.
7. The LNE100.LAN driver should appear in your choice list for
the 'Select a LAN Driver' field. Choose this driver to
start the driver loading and binding procedure. This
will allow you to load and bind all 4 frame types supported
by NetWare.
8. Next time you start up your system, simply follow steps
2 to 4 to complete the installation.
All trademarks and brand names mentioned belong to their
respective owners.
-- THE END --