home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
ftp.tcs3.com
/
ftp.tcs3.com.tar
/
ftp.tcs3.com
/
DRIVERS
/
Network
/
3COM
/
3c90x
/
Ver5.01
/
3c90xx2.exe
/
HELP
/
ADVCONFG.TXT
next >
Wrap
Text File
|
1999-06-10
|
2KB
|
68 lines
3Com (R) Corporation
3C90x EtherLink PCI NIC Family
Advanced NIC Configuration Information
--------------------------------------------------------------------------
The EtherLink 10/100 PCI For Complete PC Management (3C905C-TX-M) NIC
supports advanced features such as Remote Wake-Up, remote system alerts
(heartbeat packets), and a workgroup keep-alive packet.
IMPORTANT: These features should be configured by
system administrators only.
To configure the 3C905C-TX-M NIC's advanced features:
1. Install the 3Com NIC Diagnostics program for Windows.
See the user guide for instructions.
2. Open the Windows Start menu and select Run.
3. At the prompt, enter:
tcaudiag -a
The 3Com NIC Diagnostics program starts.
4. Select the Configuration tab.
The advanced settings appear on the screen.
Select a setting to configure it.
Remote Wake-Up
--------------
Enabled Defaults -- allows the NIC to wake up the
PC when one of the default events is received.
Disabled -- disables Remote Wake-Up on the NIC.
Enabled Custom -- allows you to determine which
events can wake up the NIC.
Workgroup Keep-Alive
--------------------
Enabled -- a packet is sent periodically by the
NIC to ensure that the PC's MAC address is not
aged-out of switch forwarding tables.
Disabled -- the workgroup keep-alive packet is
not sent by the NIC.
Alerts
------
Enabled Custom -- allows you to determine which
remote system alerts are generated by the NIC.
Disabled -- disables the NIC's ability to generate
a remote system alert.
3Com and EtherLink are registered trademarks of 3Com Corporation.
(%VER ADVCONFG.TXT - Advanced Configuration v5.1.0)