ftp.tcs3.com/ftp.tcs3.com.tar/ftp.tcs3.com/DRIVERS/Audio/Pro_Sonic/CD16.ZIP/PROSINST.INF

Text File | 1994-10-21 | 10KB | 348 lines

0 Pro Sonic 16 Quick Start Installation Program
0 ════════════════════════════════════════════

1 Welcome to the Pro Sonic 16 Quick Start Installation Program.

2 Quick Start installs the Pro Sonic 16 software and tests your system
2 to ensure it is ready to run your games and applications. Quick Start
2 automatically assigns DMA and IRQ settings for the Pro Sonic 16 sound
2 card to use, and updates your DOS and Windows system files.

3 If you want to use a directory other than \PROSONIC to store your
3 software (\PROSONIC is recommended), press the BACKSPACE key to erase
3 the name shown below and then type the name of the directory.
3 Press ENTER to continue when the new directory name is correct.

4 This is a test of the Pro Sonic 16 hardware settings.

5 Use the UP and DOWN arrow keys to highlight an item and press ENTER
5 to select.

6 Quick Start is now ready to copy files into the directory shown
6 below.

7 Below are the values Quick Start selected for your sound card.
7 You will hear a test sound each time an IRQ or DMA channel is tested.

8 If you want to change any settings, use the UP and DOWN arrow keys
8 to select and press ENTER.  To continue, select 'Complete
8 Changes' and press ENTER.

9 The DMA channel setting was determined by Quick Start avoid possible
9 system conflicts.  Select another available DMA channel if you want to
9 change this setting.

10 The IRQ setting was determined by Quick Start to avoid system conflicts.
10 Select another available IRQ if you want to change this setting.

11 If you select YES (recommended), your DOS configuration files -
11 CONFIG.SYS and AUTOEXEC.BAT - will be modified.  The previous
11 versions of these files will be saved as CONFIG.000 and AUTOEXEC.000.

12 Use the UP and DOWN arrow keys and press ENTER to select a setting.
12 Press ESC to cancel.

13 If you select YES, your Windows configuration files (SYSTEM.INI and
13 WIN.INI) will be modified and the previous versions will be saved
13 as SYSTEM.000 and WIN.000.  Also, current sound drivers in your
13 Windows "system" directory will be updated.

14 Installation Information:

15 Quick Start has finished installing your Pro
15 Sonic 16 sound card.  Press F3 to exit to DOS,
15 then restart your computer by simultaneously
15 pressing the CTRL-ALT-DEL keys.

16 Unable to perform system test.

17 Please Insert the Disk Containing:

18 WARNING:  The file listed above was not found!  The installation is not
18           complete.  Press F3 to exit.

19 WARNING:  The software may not be fully
19           installed since you did not choose
19           to update Windows' system files.

20 No changes were made by Quick Start.

21 Error: Unable to copy files.  Please run Quick Start
21 from the installation diskette to Install Software.

22 Press <F3> to exit.

23 Unable to initialize the Pro Sonic 16 sound card.
23 Please perform the installation again.
23 Is the sound card installed in your computer?
23 If so, call Technical Support [phone].

24          Insert the disk with MSCDEX.EXE
24                and press <ENTER>

25 The file FILELIST.TXT has an invalid format.

26 Press ESC if you do not want to install this program.

27 This file is required for unarchiving the
27 installation files.

28 Quick Start detects that the directory shown below
28 already exists.

29 Press ENTER to continue.

30 Data Compression provided courtesy of LHARC
30   - Copyright Haruyasu Yoshizaki -

31 If you select YES, the Pro Sonic 16 files will be copied to the
31 directory you specified.
31 If you select NO, the Pro Sonic 16 files will NOT be copied.

32 If you select YES, the DMA channel and IRQ settings will be tested.
32 The tests will not be performed if you select NO.

33 If you select YES, the joystick port will be enabled.  If you
33 select NO, the joystick will be disabled.  The default setting is YES.

34 Select an IRQ setting.  Quick Start has determined the initial setting
34 to avoid any system conflict.

35 Press ESC if you want to change the name, or
35 Press F3 to exit Quick Start.

36 WARNING:
36     Quick Start detects that a DMA channel
36     caused the system to halt.  You should
36     manually select DMA channels, and keep
36     track of which one causes this problem.
36     Channels 5, 6 and 7 are the usual source
36     of failure.  Be sure to test the DMA
36     channels on the next screen.

41 Software has not been installed in the default:

42 directory.  Install the software before setting
42 up the hardware, or run the install program from
42 the directory where the software is installed.

43 Select a 16 bit DMA channel. This will be used for playing
43 and recording 16 bit audio. Quick Start has determined the
43 initial setting to avoid system conflict.

44 To enable Sound Blaster Emulation, select YES.  To disable it, select
44 NO.  The default value is YES.

45 To enable MPU-401 Emulation, select YES. To disable it, select NO.
45 The default value is NO.

46 Select the Sound Blaster port address.  Quick Start has
46 determined the initial setting of port address '220'.

47 Select the Prosonic card IRQ setting.  Quick Start has
47 determined the initial setting to avoid system conflict.

48 Select the Prosonic card DMA channel.  Quick Start has
48 determined the initial setting to avoid system conflict.
48 WARNING:  Only DMA 1 is fully Sound Blaster compatible.

49 Select an MPU-401 port address.  The default setting is port "330".

50 Select an MPU-401 IRQ setting.  Quick Start has determined the
50 initial setting to avoid system conflict.

51 NOTE: Many DOS-based software programs use
51       IRQ 2 for the MPU-401 feature.

52 WARNING:  The Prosonic software is not fully
52           installed since you did not choose
52           to update the DOS system files.
52 NOTE:     System files are saved before being
52           modified.  You may undo changes
52           made by renaming the saved versions
52           of the original files.

53 WARNING: The Prosonic software is not fully
53          installed since you did not choose
53          to update the DOS or Windows system
53          files.
53 NOTE:    System files are saved before being
53          modified. You may undo changes made
53          by renaming the saved versions of the
53          original files.

58 Select the PORT # for the CD-ROM Drive. This value is
58 determined by Jumper JP1 on the board. If you do not
58 know this value, exit the Install Program, and check
58 JP1 on the board. The factory default setting is 340.

59 59

60 PORT #%d not available

67 67

68 Select the IRQ # for the CD-ROM Drive. This value is
68 determined by Jumper 8 on the board. If you do not
68 know this Value, exit the Install Program, and check
68 J8 on the board. The factory default setting is 11.

69 This disk is required to complete the installation.

71 Please specify the DMA parameter

72 Please specify the IRQ parameter

73 Please specify the SB parameters

74 Please specify the MPU parameters

75 That is an invalid directory name

76 OS/2 Detected, no updates

77 Modifying:  CONFIG.SYS

78 Modifying:  AUTOEXEC.BAT

79 mv.ini exists, not altered

80 Error: - the disk is write protected

81 Error: - invalid disk drive

82 Error: - insert the diskette in the floppy drive

83 Error: not enough memory to run the install program.

84 Building: %s

85 Copying:  %s

86 De-archiving:  %s

87 Error opening file TBPRO.BAT.

88 Copying files...

91 Do you have Windows 3.1 on your system?

92 Analyzing System Configuration

93 System Analysis Completed

94 Analyzing Quick Start Output

95 Skipping Auto-Detect Phase

96 Testing DMA/IRQ Combinations

97 No valid DMA/IRQ combinations found

98 Error: Insufficient Disk Space

99 DMA #%d not available

100 Testing DMA/IRQ Combination

101 Select a different combination

102 DMA/IRQ Combination okay

103 IRQ #%d not available

105 error: can not create mv.ini

106 Creating mv.ini

107 Updating system.ini

108 Updating win.ini

110 Error: not a Valid Drive

131 Warning: If you have Windows but do not let Quick Start

132 update your Windows files, you will need to refer to the

133 Installation Guide and perform this task manually.

134 Quick Start will backup these files before modifying

135 them, and save them as 'win.000' and 'system.000'

136

137 Press ESCAPE to Continue without Updating Windows

138 Press ENTER to Return to Previous Screen

141 Type a directory name or [ESC] to Cancel

142 Error: Not a Valid Directory

143 Error: Not a Windows Directory

151 Testing IRQ=%d

152 Missing file TESTWAV (see filelist.txt)

153 Missing file PCMCOM (see filelist.txt)

154 Error during test

155 Missing file PLAYEXE (see filelist.txt)

160 The Prosonic Software appears to be already

161 installed. If you want to reinstall the

162 software, please use the original

163 diskette.

165 Press ENTER to Return to Previous Screen

167 Quick Start will use the default or current IRQ/DMA settings.

171 Please Enter the Full Path Name of the Windows Directory

172 Press Enter to Continue, ESCAPE to Cancel

173 Please power-on the CDPC XL subsystem.  Do you wish to continue?

196 Cannot create directory

197 Cannot use specified drive

198 Insufficient Disk Space

199 Exit Install?

200 Can't find FILELIST.TXT.
200 Please install from original
200 disk.

201              !!! WARNING !!!
201 Some Sound Blaster compatible applications
201 require the sound card to be set to use I/O
201 port address 220H. The I/O port address you
201 have selected is different and may cause you
201 to experience some difficulty in using your
201 sound card.


205 Please select Install Software and Setup

206 Hardware.

207

208 Hardware Setup can be run only after

209 the software has been installed.

210 Press ENTER to Return to Previous Screen

211 Please select the CD-ROM drive you want to install.