home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
kermit.columbia.edu
/
kermit.columbia.edu.tar
/
kermit.columbia.edu
/
e
/
v14.3
< prev
next >
Wrap
Internet Message Format
|
1991-08-22
|
10KB
From cmg Fri Aug 23 15:13:06 1991
Return-Path: <cmg>
Received: by watsun.cc.columbia.edu (5.59/FCB)
id AA08669; Fri, 23 Aug 91 15:13:06 EDT
Date: Fri, 23 Aug 91 15:13:05 EDT
From: Christine M Gianone <cmg@watsun.cc.columbia.edu>
To: Info-Kermit
Subject: Info-Kermit Digest V14 #3
Reply-To: Info-Kermit@watsun.cc.columbia.edu
Queries-To: Info-Kermit-Request@WATSUN.CC.COLUMBIA.EDU
Errors-To: Info-Kermit-Request@watsun.cc.columbia.edu
Message-Id: <CMM.0.90.0.682974785.cmg@watsun.cc.columbia.edu>
Info-Kermit Digest Fri, 23 Aug 1991 Volume 14 : Number 3
Today's Topics:
MS-DOS Kermit 3.11 Prerelease Ready for Testing
Termcap/Terminfo for MS-DOS Kermit on the Wang PC
MS-DOS Kermit Speed under Windows
Digest submissions may be sent to Info-Kermit@WATSUN.CC.COLUMBIA.EDU or
KERMIT@CUVMA.BITNET. Requests for addition to or deletion from the
Info-Kermit subscriber list should be sent to LISTSERV@CUVMA.BITNET or
LISTSERV@CUVMA.CC.COLUMBIA.EDU. These messages must be of the form:
SUBSCRIBE I-KERMIT <your-personal-name> (To start a subscription)
UNSUBSCRIBE I-KERMIT (To cancel a subscription)
REGISTER I-KERMIT <your-personal-name> (To correct your name)
Kermit files may be obtained over networks and by mail order. On the
Internetwork, use FTP to log in to host WATSUN.CC.COLUMBIA.EDU, a SUN-4/280
running UNIX (SUNOS 4.1), IP host number 128.59.39.2. Login as user anonymous
(note, lower case), any password, and GET or MGET (MULTIPLE GET) the desired
files. The Kermit files are in directories kermit/a, kermit/b, kermit/c,
kermit/d, and kermit/e. Test versions are in kermit/test. All files in these
directories should be transferred in text (ASCII) mode. Binaries are in
kermit/bin (use ftp in binary mode). You can also get Kermit files over the
BITNET/EARN network; to get started send a message with text HELP to KERMSRV,
the Kermit file server, at host CUVMA. For detailed instructions, read the
file kermit/a/aanetw.hlp (AANETW.HLP on KERMSRV). To order by mail, request a
complete list of Kermit versions and an order form from Kermit Distribution,
Columbia University Center for Computing Activities, 612 West 115th Street,
New York, NY 10025 USA.
----------------------------------------------------------------------
Date: Fri, 23 Aug 1991 15:28 EDT
>From: Christine M Gianone <cmg@watsun.cc.columbia.edu>
Subject: MS-DOS Kermit 3.11 Prerelease Ready for Testing
Keywords: MS-DOS Kermit 3.11, TCP/IP
>From Professor Joe R. Doupnik (JRD) of Utah State University, a new release
of MS-DOS Kermit. The final release will occur in about one week, so rapid
testing and reporting of bugs is needed. Please report problems directly via
e-mail to Joe: jrd@cc.usu.edu (Internet), JRD@USU (BITNET/EARN), with cc to
Info-Kermit@watsun.cc.columbia.edu. Please limit your reports to bugs
(and/or fixes) -- the design and features of this release are frozen. The
sooner you get your bug reports in, the greater the chances of getting the
bugs fixed!
The differences from version 3.10 are:
NETWORKS:
. Built-in TCP/IP network support for PCs with Ethernet-style packet drivers.
. New SET PORT TCP/IP <host>, SET TCP/IP <parameter> <value> commands.
. Alt-n has \Knethold assigned by default.
. SET NETBIOS-NAME allows you to set the PC's Netbios node name.
TERMINAL EMULATION:
. VT220 terminal type now supported.
. Alt-minus now toggles between current text terminal and graphics screens,
rather than all possible terminal types.
. SET TERMINAL CHARACTER-SET DEC-SPECIAL.
. SET TERMINAL UPSS {DEC-MCS, LATIN1}.
SCRIPT PROGRAMMING:
. New OPEN, CLOSE, READ, and WRITE commands for local file access.
. "Long variable names": \m(this-is-a-variable-name).
. Maximum length for macro definitions raised from 255 to 1000.
. GOTO is now global, rather than confined to current macro or command file.
OTHER:
. New simplified and expanded dialing directory using a plain text file.
. All known 3.10 bugs are fixed.
. Improved help and status screens.
. New help and beware files.
The long variables work like this. Define them as if they were macros:
define telephone-number 7654321
Refer to them using the new \m() construct:
output atdt \m(telephone-number)\13
Those who want to try out the TCP/IP networking support, but don't have
packet drivers, use anonymous FTP to get them from Clarkson College in
Potsdam, NY, host sun.soe.clarkson.edu [128.153.12.3], cd pub/ka9q, use "type
binary", get the appropriate zip, arc, zoo, etc, files, and use PKUNZIP or
ZOO on your PC to unpack them. Only Ethernet-style packet drivers are
supported. The new version of Kermit has been sucessfully tested with the
following boards and accompanying packet drivers:
Ungermann-Bass PC/NIC board with Clarkson UBNICPC packet driver 9.1
3COM 3C503 with Clarkson 3C503 packet driver 9.4.0
Western Digital WD8003E with Clarkson WD8003E packet driver
Cabletron boards with Cabletron CSIPD_E (1.05) and CSIPD_X packet drivers
IBMTOKEN.COM 3C501 emulation packet driver 1.9 over Token Ring board+drivers
DIS_PKT over NDIS for LAN Manager networks (incl DECnet/DOS, AT&T StarGROUP)
The new Kermit commands are:
SET TCP/IP ADDRESS <ip-address> Tell Kermit the IP address of your PC
SET TCP/IP BROADCAST <ip-address> IP broadcast address
SET TCP/IP SUBNETMASK <ip-address> Your local IP network subnet mask
SET TCP/IP GATEWAY <ip-address> IP address of nearest gateway
SET TCP/IP DOMAIN <domain-name> Domain name for your local IP network
SET TCP/IP PRIMARY-NAMESERVER <ip-address> Address of primary nameserver
SET TCP/IP SECONDARY-NAMESERVER <ip-address> Address of fallback nameserver
SET TCP/IP HOST <ip-address or host-name> Default host for SET PORT TCP
SET PORT TCP/IP <ip-address or host-name> Specify host to connect to
Automatic downloading of some of these parameters via BOOTP or RARP is also
supported. Before using Kermit's TCP/IP features, be sure to read the TCP/IP
sections at the end of MSKERM.HLP and MSKERM.BWR!
Many thanks to Erick Engelke of Waterloo University in Ontario for
contributing his Waterloo TCP package (WATTCP), and for his cooperation in
adapting it to Kermit.
The new files are in kermit/test/ms* on watsun.cc.columbia.edu, and in T:MS*.*
on KERMSRV at CUVMA on BITNET/EARN. Convert the MSTIBM.BOO file into
MSTIBM.EXE with any of the MSBPCT.* programs available in kermit/a or
kermit/bin, or from KERMSRV. On the Internet only, the binary MSTIBM.EXE
program is available via binary-mode FTP from kermit/bin/mstibm.exe.
FTP users: remember -- transfer files from the kermit/bin directory in binary
mode, transfer all files from all the other directories in text (ASCII) mode.
Source code will appear with the final release.
See MSKERM.HLP for information about the new commands and about how to use
the dialing directory. Make sure to get the new MSKERMIT.INI and MSIHAY.SCR
files too, since the dialing directory is implemented by these files (note,
you must rename MSIHAY.SCR to HAYES.SCR so the DIAL command can find it).
There is also a sample dialing directory file MSIDIA.TXT (rename to
DIALUPS.TXT). The "beware file" for the new version is MSKERM.BWR -- be sure
to read it before reporting problems.
As always, our deepest thanks to Joe for his skill, generosity, patience, and
long hours of hard work in making this new version of MS-DOS Kermit available.
------------------------------
Date: Thu, 8 Aug 91 16:35:49 EDT
>From: pfm@BOURBAKI.MIT.EDU
Subject: Termcap/Terminfo for MS-DOS Kermit on the Wang PC
Keywords: Wang PC Kermit
In case it's of interest to anyone else, I am sending my cheap way out of not
having a terminal emulator with the Wang PC version of MS-DOS Kermit: UNIX
termcap and terminfo files that will make the PC work as a VT100 minus
function keys. (it has the correct screen and cursor escapes and the cursor
arrow keys which makes it completely adequate for full screen use but not
function keys).
Let me also mention that I've put the IBM-PC version of Kermit on several PC's
here we use as terminals, which had vt100 emulators only. The vt320/tek
emulators are great and will probably save us from buying new graphics
terminals. Keep up the good work!
Best regards,
Paul Mende
pfm@math.mit.edu Center for Theoretical Physics
pfm@mitlns.bitnet Massachusetts Inst. of Technology
[Ed. - Thanks, Paul. The Wang PC termcap/terminfo material has been added
to the Kermit distribution as MSVWNG.TC.]
------------------------------
Date: Tue, 20 Aug 91 15:15:19 EST
>From: Pat Zerkle <PLZSYS%RITVM@cuvmb.cc.columbia.edu>
Subject: MS-DOS Kermit Speed under Windows
Keywords: MS-DOS Kermit and MS Windows
Regarding newsletter comments re MS-DOS 5.0, Windows 3.0, and serial speeds
above 9600. I use a 386/25MHz 64k cache, 4mb RAM 'AT Clone' (Club American)
with AMI BIOS, connecting via a DEC LAT to an IBM 7171. I have had no
problem using MS-Kermit 3.1 at 19200 bps under MS-DOS 4.01, MS-DOS 5.0, and
via Windows 3.0 Enhanced under either DOS version. In Windows, I use the
switch to enable background execution. The maximum speed is probably limited
by a combination of software/BIOS/architecture/serial hardware/system load, so
we can probably only use empirical methods to get it to work. As for Windows,
the files \WINDOWS\SYSIN*.TXT installed by Windows (at least, my 5/1/90 files)
explain several SYSTEM.INI settings related to COM ports. The COMxBuffer and
COMBoostTime settings may help (hurt?) some users.
Cordially,
Pat Zerkle
[Ed. - Thanks for the encouraging report. Another user, E.W. Carlson says,
"I don't understand the July 25 comment that MS-Kermit can not run faster
than 9600 baud under Windows. I routinely run MS-Kermit at 19,200 baud
under Windows on a PS/2 55SX. The machine is standard IBM equipment with
no special chips added."]
------------------------------
End of Info-Kermit Digest
*************************