home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
kermit.columbia.edu
/
kermit.columbia.edu.tar
/
kermit.columbia.edu
/
archives
/
mskermit.zip
/
msvibmzip.uue
/
MSVIBM.ZIP
/
NETWORKS
/
SLIP8250.DOC
< prev
next >
Wrap
Text File
|
1994-09-28
|
948b
|
29 lines
SLIP8250 -- SLIP-CLASS (CLASS 6) PACKET DRIVER FOR DOS
Command-Line format:
SLIP8250 [-n] [-d] [-w] packet_int_no [-h] [driver_class] [int_no]
[io_addr] [baud_rate] [recv_buf_size]
Note: All parameters are given on one line, in the order shown. Trailing
arguments (after packet_int_no) can be omitted. The defaults are:
driver_class = SLIP (Class 6)
int_no = 4 (for IRQ 4)
io_addr = 03f8h (for COM1)
baud_rate = Whatever the port is presently set to
recv_buf_size = 3000
The driver_class should be SLIP, KISS, AX.25, or a number. A 3000-byte
receive buffer is about twice as large as most programs need, but
experimenting is ok.
-h enables hardware handshaking (RTS/CTS) (recommended!). Software flow
control (Xon/Xoff) is not available.
Run SLIP8250 from the DOS prompt, or from your AUTOEXEC.BAT file. Example:
slip8250 0x60 SLIP 4 0x3f8 19200 3000
(End of SLIP8250.DOC)