home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
kermit.columbia.edu
/
kermit.columbia.edu.tar
/
kermit.columbia.edu
/
archives
/
cku196.zip
/
ckaaaa.txt
next >
Wrap
Text File
|
2000-01-02
|
16KB
|
386 lines
CKAAAA.TXT 1 Jan 2000
C-KERMIT VERSION 7.0.196
OVERVIEW OF FILES
Communications software for UNIX, (Open)VMS, Stratus VOS, AOS/VS, QNX,
Plan 9, OS-9, Apollo Aegis, and the Commodore Amiga.
Copyright (C) 1985, 2000,
Trustees of Columbia University in the City of New York.
All rights reserved. See the C-Kermit COPYING.TXT file or the
copyright text in the ckcmai.c module for disclaimer and permissions.
DOCUMENTATION
C-Kermit is documented in the book "Using C-Kermit", Second Edition, by
Frank da Cruz and Christine M. Gianone, Digital Press, ISBN 1-55558-164-1.
Available at book and computer stores, or order from Columbia University
by calling +1 212 854-3703 (MasterCard and Visa accepted), or by calling
Digital Press / Butterworth-Heinemann at one of the numbers below
(MasterCard, Visa, and American Express accepted). PLEASE PURCHASE THE
DOCUMENTATION: it shows you step-by-step how to use C-Kermit with lots of
examples and illustrations, it will answer most of your questions, and
sales help to fund the Kermit development and support effort. Digital
Press phone numbers:
+1 800 366-2665 (Newton, Massachusetts office for USA & Canada)
+44 1865 314627 (Oxford, England distribution centre for UK & Europe)
+61 03 9245 7111 (Melbourne, Vic, office for Australia & NZ)
+65 356-1968 (Singapore office for Asia)
+27 (31) 2683111 (Durban office for South Africa)
The second editon of Using C-Kermit corresponds to version 6.0. The changes
since 6.0 are documented in the file ckermit2.txt, which supplements the
second edition of the manual until the third edition is published.
A German edition is available from Verlag Heinz Heise in Hannover, Germany,
Tel. +49 (05 11) 53 52-0, Fax. +49 (05 11) 53 52-1 29.
FILE NAMING CHANGES
After C-Kermit 6.1 Beta.05, the names of all the text files were changed
to have a filetype of ".txt" to allow them to be handled properly by
Windows-based applications, Web browsers, etc:
ckermit2.upd => ckermit2.txt
ckaaaa.hlp => ckaaaa.txt
ckc195.upd => ckc195.txt
ckuins.doc => ckuins.txt
ckvins.doc => ckvins.txt
ckermit.bwr => ckcbwr.txt
ckuker.bwr => ckubwr.txt
ckvker.bwr => ckvbwr.txt
ckcplm.doc => ckcplm.txt
ckccfg.doc => ckccfg.txt
QUICK START FOR FTP USERS (UNIX, VMS, AOS/VS, VOS, ...)
If you have a Web browser, go to:
http://www.columbia.edu/kermit/ckermit.html
And take it from there. Otherwise...
The definitive FTP source for Kermit software is kermit.columbia.edu.
Kermit software obtained from other FTP sites is not necessarily complete
or up to date, and may have been modified. (Note: C-Kermit is now available
from the Kermit Project on CDROM.)
C-Kermit for UNIX computers that have a C compiler and 'make' program:
Directory kermit/archives, binary mode, file cku196.tar.Z or cku196.tar.gz
This is a compressed tar archive of UNIX C-Kermit source code, makefile, and
other files. Transfer in binary mode, uncompress (or gunzip), untar (tar
xvf cku196.tar), and then give the appropriate "make" command to build for
your UNIX system; read the comments in the makefile and ckuins.txt for
further info.
C-Kermit for VMS:
If you have VMS UNZIP, get the file kermit/archives/ckv196.zip in binary
mode, unzip, and build with CKVKER.COM. Otherwise get the file
kermit/f/ckvaaa.hlp in text mode, read it, take it from there.
Others: In the kermit/f or kermit/test directories under the appropriate
prefixes, explained below.
INSTALLATION
Installation procedures depend on the system. Please read the CK?INS.TXT,
if any, file for your system (?=U for UNIX, V for VMS, etc). Please note
the naming and placement for the initialization files:
CKERMIT.INI
The standard initialization file. Please leave it as is unless you
know what you are doing and (if you are changing it or replacing it
for others to use) you are prepared to support it. Rename this file
to .kermrc in UNIX, OS-9, BeBox, or Plan 9. In Stratus VOS, rename
it ckermit.ini (lowercase). On multiuser systems, it goes either in the
(or EACH) user's home (login) directory, or else in a common shared
place if C-Kermit has been configured to look in that place (see
ckccfg.txt for details).
CKERMOD.INI
A *sample* customization file. On multiuser OS's, a copy of this file
goes in each user's home directory, and then each user edits it to suit
her needs and preferences; e.g. by defining macros for their common
connections.
DIALING DIRECTORIES
Dialing directory files can be system-wide, per-group, or per-user, or
any combination. For example, there can be a corporate wide directory
shared by all users, a supplemental directory for each division or
department, and a personal directory for each user. Simply be sure the
dialing directory files are identified a SET DIAL DIRECTORY command in
the user's (or the system-wide) C-Kermit initialization file, or in the
environment variable (logical name, symbol) K_DIAL_DIRECTORY. (The
standard initialization file looks by default in the user's home or login
directory.) When installing C-Kermit on multiuser platforms from which
users will dial out, you can also set environment variables for area
code, country code, and the various dialing prefixes as described on page
478 of "Using C-Kermit" (second edition), so users don't have to worry
about defining these items themselves. Network directories and service
directories can also be set up in a similar manner.
DOCUMENTATION
In UNIX, the general C-Kermit man page (or one of the versions tailored
for a specific platform, like HP-UX or Solaris) should be installed in
the appropriate place. In VMS, the VMS help topic (CKVKER.HLP) should
be installed as described in CKVINS.TXT. Plain-text documentation such
as CKERMIT2.TXT should be put in whatever place people are accustomed
to looking.
FILES AND FILE NAMING CONVENTIONS
C-Kermit is a family of Kermit programs for many different computer systems.
The program shares a common set of system-independent file transfer protocol
modules, written in the C language. System-dependent operations are collected
into system-specific modules for each system.
C-Kermit file names all start with the letters "CK", followed by a single
letter indicating the subgroup. When referring to these files in the UNIX,
AOS/VS, or VOS environments, use lowercase letters, rather than the uppercase
letters shown here. Subgroups:
A: General descriptive material and documentation
B: BOO file encoders and decoders (obsolete)
C: All systems with C compilers
D: Data General AOS/VS
E: Reserved for "ckermit" files, like CKERMIT.INI, CKERMIT2.TXT
F: (reserved)
G: (reserved)
H: (reserved)
I: Commodore Amiga (Intuition)
J: (unused)
K: (unused)
L: Stratus VOS
M: Macintosh with Mac OS
N: Microsoft Windows NT
O: OS/2 and/or Microsoft Windows 95/98/NT
P: Bell Labs Plan 9
Q: (reserved)
R: DEC PDP-11 with RSTS/E (reserved)
S: Atari ST GEMDOS (last supported in version 5A(189))
T: DEC PDP-11 with RT-11 (reserved)
U: UNIX or environments with UNIX-like C libraries
V: VMS and OpenVMS
W: Wart (Lex-like preprocessor, used with all systems)
X: Build lists (most recent build for each platform), e.g. ckx196.txt.
Y: (reserved)
Z: (reserved)
0-3: (reserved)
4: IBM AS/400
5-8: (reserved)
9: Microware OS-9
Examples (use lowercase on UNIX, VOS, or AOS/VS):
CKAAAA.TXT - This file
CKVAAA.TXT - Read-me file for the VMS version
CKUFIO.C - File i/o for UNIX
CKSTIO.C - Communications i/o for the Atari ST
MAKEFILE - Makefile for building UNIX C-Kermit
CKOKER.MAK - Makefile for building OS/2 C-Kermit
IMPORTANT FILES (use lowercase names on UNIX, VOS, or AOS/VS):
CKAAAA.TXT - This file (overview of the C-Kermit files).
For system-specific distributions, this will normally
be replaced by a system-specific READ.ME file.
CKERMIT2.TXT - Updates: Supplement to "Using C-Kermit", 2nd Ed.
CKCBWR.TXT - "Beware file" (limitations, known bugs, hints), general.
CKERMIT.INI - Standard initialization file (rename to .kermrc in UNIX, OS-9)
CKERMOD.INI - Sample customization file (rename to .mykermrc in UNIX, OS-9)
CKERMIT.KDD - Sample dialing directory file (rename to .kdd in UNIX, OS-9)
CKERMIT.KND - Sample dialing directory file (rename to .knd in UNIX, OS-9)
CKERMIT.KSD - Sample services directory file (rename to .ksd in UNIX, OS-9)
CKEDEMO.KSC - Demonstration macros from "Using C-Kermit"
CKEPAGE.KSC - Ditto
CKEVT.KSC - Ditto
UNIX-specific files (use lowercase names on UNIX, VOS, or AOS/VS):
CKUINS.TXT - UNIX-specific installation instructions.
CKUBWR.TXT - UNIX-specific beware file.
CKUKER.NR - "man page" for UNIX.
CKURZSZ.INI - Macros for external protocols.
VMS-specific files:
CKVINS.TXT - VMS-specific installation instructions.
CKVBWR.TXT - VMS-specific beware file
CKVKER.HLP - VMS C-Kermit HELP topic
DG AOS/VS-specific files:
CKDINS.TXT - Data General AOS/VS C-Kermit installation instructions
CKDBWR.TXT - AOS/VS "beware" file
CKD*.CLI - Procedures for building AOS/VS C-Kermit
The following files are of interest mainly to programmers and historians:
CKCKER.ANN - Release announcements.
CKCCFG.TXT - Configuration information (feature selection), general.
CKCPLM.TXT - Program logic manual (for programmers).
CKC196.TXT - Program update history for edit 195-196 (big)
CKC190.TXT - Program update history for edits 189-190 (big).
CKC188.TXT - Program update history, edits 179-188 (big).
CKC178.TXT - Program edit history, 5A edits through 178 (very big).
CKCV4F.TXT - Program edit history, version 4F.
CKCV4E.TXT - Program edit history, version 4E.
BINARIES
If you have FTP access to kermit.columbia.edu (also known as
kermit.cc.columbia.edu, ftp.cc.columbia.edu, watsun.cc.columbia.edu), you can
also retrieve various C-Kermit binaries from the directory kermit/bin/ck*.*.
Test versions would be in kermit/test/bin/ck*.*. Be sure to transfer these
files in binary mode. The READ.ME file in that directory explains what's what.
SOURCE FILES
The source files for the UNIX version (all UNIX versions) are available in
kermit/archives/ckuNNN.tar.Z, approximately 1MB in size. Transfer this file
in binary mode. This is a compressed tar archive. There is also a gzip'd
version, cku196.tar.gz. To get the binary tar archive:
mkdir kermit (at shell prompt, make a Kermit directory)
cd kermit (make it your current directory)
ftp kermit.columbia.edu (make an ftp connection)
user: anonymous (log in as user "anonymous", lower case!)
password: (use your email id as a password)
cd kermit/archives (go to the archives directory)
type binary (specify binary file transfer)
get cku196.tar.Z (get the tar archive) (or get cku192.tar.gz)
bye (disconnect and exit from ftp)
uncompress cku196.tar.Z (at the shell prompt, uncompress the archive)
tar xvf cku196.tar (extract the files from the tar archive)
make xxx (build C-Kermit for your system)
(where "xxx" is the makefile entry appropriate for your system.)
All C-Kermit source and other text files are also kept separately in the
kermit/f directory. The files necessary to build a particular implementation
of C-Kermit are listed in the appropriate makefile or equivalent:
UNIX: makefile (or rename ckuker.mak to makefile)
2.11 BSD: ckubs2.mak (rename to makefile), ckustr.sed
Plan 9: ckpker.mk (rename to mkfile)
Macintosh: ckmker.mak (rename to kermit.make, use MPW C 3.2)
VMS: CKVKER.COM (DCL) (and optionally also CKVKER.MMS)
or CKVOLD.COM (for VMS 4.x)
Amiga: CKIKER.MAK (Aztec C) or CKISAS.MAK (SAS C)
Atari ST: CKSKER.MAK
OS-9: CK9KER.MAK or CK9KER.GCC
AOS/VS: CKDMAK.CLI, CKDCC.CLI, CKDLNK.CLI
Stratus VOS: CKLMAK.CM
Minimal source files for building selected versions (these patterns get all
the files you need, and in some cases maybe a few extra):
UNIX: ck[cuw]*.[cwh] (including QNX, Plan 9, and BeBox)
VMS: ck[cuwv]*.[cwh]
Mac: ck[cuwm]*.[cwhr]
AOS/VS: ck[cuwd]*.[cwh]
VOS: ck[cwhl]*.[cwh]
Amiga: ck[cuwi]*.[cwh]
Atari: ck[cuws]*.[cwh]
OS-9: ck[cuw9]*.[cwha]
For a detailed, specific source file list for this C-Kermit release, see the
file CKCxxx.TXT, where xxx is the current C-Kermit edit number, such as 196.
Finally, here is a more detailed description of the C-Kermit file naming
conventions. A C-Kermit filename has the form:
CK<system><what>.<type>
where:
<system> is described earlier in this file;
<type> is the file type (use lowercase on UNIX, VOS, or AOS/VS):
C: C language source
H: Header file for C language source
W: Wart preprocessor source, converted by Wart (or Lex) to a C program
R: Macintosh resource file (8-bit text)
A: Assembler source
TXT: Plain text.
NR: Nroff/Troff text formatter source for UNIX "man page"
MSS: Scribe text formatter source
PS: Typeset material to be printed on a PostScript printer
HLP: A VMS Help topic
INI: Initialization file
KSC: A Kermit Script to be executed by the TAKE command
KDD: A Kermit Dialing Directory
KND: A Kermit Network Directory
KSD: A Kermit Services Directory
MAK: A Makefile or other build procedure (often needs renaming)
COM: (VMS only) a DCL command procedure
CLI: (AOS/VS only) a command procedure
CMD: (OS/2 only) a Rexx command procedure
BOO: "boo"-encoded executable program, decode with CKBUNB program.
HEX: "hex"-encoded executable program, decode with CKVDEH program (VMS only).
HQX: BinHex'd Macintosh Kermit program, decode with BinHex version 4.0.
UUE: A uuencoded binary file, decode with uudecode or (DG only) CKDECO.
DEF: An OS/2 linker definitions file.
SED: A UNIX sed (editor) script.
STR: A file of character strings extracted from C-Kermit (BSD 2.1x).
<what> is mnemonic (up to 3 characters) for what's in the file:
NOTE: After C-Kermit 6.0, text filetypes such as .DOC and .HLP were changed
to .TXT to avoid confusion in Windows-based Web browsers, which would
otherwise mistake them for Microsoft Word or Windows Help documents.
AAA: A "read-me" file, like this one
INS: Installation instructions or procedures
BWR: "Beware" file -- things to watch out for, hints and tips
KER: General C-Kermit definitions, information, documentation
nnn: Digits: C-Kermit edit number (e.g. cku196.tar.gz)
CMD: Command parsing
CON: CONNECT command
CNS: CONNECT command (UNIX only - version that uses select(), not fork())
DEB: Debug/Transaction Log formats, Typedefs
DIA: Modem/Dialer control
FIO: System-depdendent File I/O
FNS: Protocol support functions
FN2: More protocol support functions (and FN3, ...)
LIB: Common library routines module
MAI: Main program
NET: Network i/o module
PRO: Protocol
SCR: SCRIPT command
TEL: Telnet protocol module
TIO: System-dependent communications i/o & control and interrupt handing
SIG: Signal handling module
USR: Interactive/script user interface
US2: More user interface (mainly help text)
US3: Still more user interface (and USR4, USR5, USR6, USR7)
USX: Common user interface functions
USY: Command-line parsing
XLA: Character set translation module
UNI: Unicode support
PTY: Pseudoterminal support
MDB: Malloc-debugging module (not included in real builds)
STR: Strings module (only for 2.xBSD)
(End of CKAAAA.TXT)