home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
kermit.columbia.edu
/
kermit.columbia.edu.tar
/
kermit.columbia.edu
/
archives
/
ckc190.zip
/
ckvcon.c
< prev
next >
Wrap
C/C++ Source or Header
|
1994-09-18
|
35KB
|
1,048 lines
#ifndef VMS
ERROR -- CKVCON.C is used only on the OpenVMS(tm) Operating System
#endif /* VMS */
#define CONN_OS_ARCH_STRING \
"Connect Command 5A(036) 15 Sep 94";
#ifdef __ALPHA
/* do nothing */
#else
# ifdef VAX
# module ckvcon "5.0-036"
# else
#ifndef __GNUC__
ERROR -- CKVCON.C unknown architecture, neither VAX(tm) nor Alpha
# endif /* __GNUC__ */
# endif /* VAX */
#endif /* __ALPHA */
char *connv = CONN_OS_ARCH_STRING;
/* C K V C O N -- Dumb terminal connection to remote system, for VMS */
/*
Author: Frank da Cruz (fdc@columbia.edu, FDCCU@CUVMA.BITNET),
Columbia University Academic Information Systems, New York City.
Copyright (C) 1985, 1994, Trustees of Columbia University in the City of New
York. The C-Kermit software may not be, in whole or in part, licensed or
sold for profit as a software product itself, nor may it be included in or
distributed with commercial products or otherwise distributed by commercial
concerns to their clients or customers without written permission of the
Office of Kermit Development and Distribution, Columbia University. This
copyright notice must not be removed, altered, or obscured.
*/
/*
* Orignally adapted from the UNIX C-Kermit CONNECT module by S. Rubenstein
* for systems without fork(). This version of conect() uses contti(&c, &src)
* to return when a character is available from either the console or the comm
* line, to allow sending/receiving without breaking the connection.
*
* Edit by
*
* 010 06-Mar-1989 mab General cleanup
* 011 23-Mar-1989 mab Clean up doesc() code. Add malloc() in place of
* static buffer space. Also increase buffer space.
* 012 27-Sep-1989 mab Add XON sequence.
* 013 30-Mar-1991 fdc Add so/si, character set translation.
* 014 06-Apr-1991 fdc Adapted for TGV MultiNet TCP/IP connections.
* 015 21-Jun-1991 tmk Cleaned up typo in session logging display.
* 016 28-Nov-1991 fdc "Back at <hostname>", disallow CONNECT in background
* 017 25-Dec-1991 fdc Added support for NOPUSH, added "Hanging up" message
* 018 11-Jan-1992 fdc Added support for key mapping
* 019 27-Jan-1992 fdc Added support for ANSI escape sequence recognition
* 020 00-May-1992 fdc Rewrote conect() to used buffered i/o.
* 021 10-Jun-1992 fdc Added support for Wollongong WIN/TCP from Ray Hunter.
* Fix messed-up help message.
* 022 20-Jun-1992 fdc Fixed handling of CR on TELNET sessions.
* 023 28-Jun-1992 fdc Cosmetic cleanup of "Connecting..." message.
* 024 12-Jul-1992 fdc Added mdmhup() feature (see ckudia.c).
* 025 29-Jul-1992 fdc Grouped TELNET IP and AYT into single writes.
* 026 13-Aug-1992 fdc Added support for SET TELNET NEWLINE-MODE.
* 027 05-Sep-1992 lt Added architecture ifdefs for OpenVMS, Alpha, at top.
* 028 08-Sep-1992 fdc Separated input and output SO/SO shift states.
* 029 11-Oct-1992 fdc Reduce modem-vs-net confusion in ttopen() calls.
* 030 27-Oct-1993 fdc Correct a typo in network protocol-checking code.
* 031 23-Oct-1993 fdc Reset i/o buffer pointers upon new connection.
* 032 14-Feb-1994 fdc Some minor cleanups.
* 033 9-Mar-1994 fdc Fixed failure to display quoted TELNET IAC (255).
* 034 2-Jul-1994 fdc Add initial APC support.
* 035 9-Jul-1994 fdc Fix APC support.
* 036 15-Sep-1994 fdc Add support for SET TELNET NEWLINE RAW.
*/
#include "ckcdeb.h"
#include "ckcasc.h"
#include "ckcker.h"
#include "ckucmd.h"
#include "ckcnet.h"
#include "ckvvms.h"
#ifndef NOCSETS
#include "ckcxla.h" /* Character set translation */
#endif /* NOCSETS */
#include <stdio.h>
#include <ctype.h>
#include <signal.h>
#include <setjmp.h>
static int src; /* Where input character came from */
extern int local, speed, escape, duplex, parity, flow, seslog, mdmtyp, batch;
extern int cmask, cmdmsk, debses, sosi, ttyfd, what, quiet, tnlm,
tt_crd, tn_nlm;
extern char ttname[], sesfil[], myhost[];
#ifndef NOICP /* Keyboard mapping */
#ifndef NOSETKEY
extern KEY *keymap; /* Single-character key map */
extern MACRO *macrotab; /* Key macro pointer table */
static MACRO kmptr = NULL; /* Pointer to current key macro */
#endif /* NOSETKEY */
#endif /* NOICP */
/* Network support */
extern int ttnproto, /* Virtual terminal protocol */
network, /* Network connection active */
nettype; /* Network type */
#ifndef NOCSETS
#ifdef CK_ANSIC
extern CHAR (*xls[MAXTCSETS+1][MAXFCSETS+1])(CHAR); /* Character set */
extern CHAR (*xlr[MAXTCSETS+1][MAXFCSETS+1])(CHAR); /* translation functions */
static CHAR (*sxo)(CHAR); /* Local translation functions */
static CHAR (*rxo)(CHAR); /* for output (sending) terminal chars */
static CHAR (*sxi)(CHAR); /* and for input (receiving) terminal chars. */
static CHAR (*rxi)(CHAR);
#else
extern CHAR (*xls[MAXTCSETS+1][MAXFCSETS+1])(); /* Character set */
extern CHAR (*xlr[MAXTCSETS+1][MAXFCSETS+1])(); /* translation functions. */
static CHAR (*sxo)(); /* Local translation functions */
static CHAR (*rxo)(); /* for output (sending) terminal chars */
static CHAR (*sxi)(); /* and for input (receiving) terminal chars. */
static CHAR (*rxi)();
#endif /* CK_ANSIC */
extern int language; /* Current language. */
extern struct csinfo fcsinfo[]; /* File character set info */
extern int tcsr, tcsl; /* Terminal character sets, remote & local. */
static int langsv; /* Remember language */
static int tcs; /* Intermediate (xfer) char set */
_PROTOTYP( VOID doesc, (unsigned char) );
#endif /* NOCSETS */
#ifdef NOCSETS /* No character sets */
#ifndef CK_APC /* No APC */
#ifndef NOESCSEQ
#define NOESCSEQ /* So no escape sequence recognizer */
#endif /* NOESCSEQ */
#endif /* CK_APC */
#endif /* NOCSETS */
#ifdef CK_APC
extern int apcactive; /* Application Program Command (APC) */
extern int apcstatus; /* items ... */
static int apclength = 0;
#ifdef DCMDBUF
extern char *apcbuf;
#else
extern char apcbuf[];
#endif /* DCMDBUF */
static int apcbuflen = APCBUFLEN - 2;
#endif /* CK_APC */
int i, active; /* Variables global to this module */
static char *p;
#ifndef NOESCSEQ
/*
As of edit 178, the CONNECT command will skip past ANSI escape sequences
to avoid translating the characters within them. This allows the CONNECT
command to work correctly when connected to a remote host that uses a
7-bit ISO 646 national character set, in which characters like '[' would
normally be translated into accented characters, ruining the terminal's
interpretation (and generation) of escape sequences.
Escape sequences of non-ANSI/ISO-compliant terminals are not handled.
*/
/*
States for the escape-sequence recognizer.
*/
#define ES_NORMAL 0 /* Normal, not in escape sequence */
#define ES_GOTESC 1 /* Current character is ESC */
#define ES_ESCSEQ 2 /* Inside an escape sequence */
#define ES_GOTCSI 3 /* Inside a control sequence */
#define ES_STRING 4 /* Inside OSC, PM, or APC string */
#define ES_TERMIN 5 /* 1st char of string terminator */
static int
escseq = 0, /* Skip over ANSI escape sequences */
inesc = ES_NORMAL, /* State of sequence recognizer */
oldesc = -1; /* Previous state of recognizer */
/*
ANSI escape sequence handling. Only the 7-bit form is treated, because
translation is not a problem in the 8-bit environment, in which all GL
characters are ASCII and no translation takes place. So we don't check
for the 8-bit single-character versions of CSI, DCS, OSC, APC, or ST. Here
is the ANSI sequence recognizer state table, followed by the code that
implements it.
Definitions:
CAN = Cancel 01/08 Ctrl-X
SUB = Substitute 01/10 Ctrl-Z
DCS = Device Control Sequence 01/11 05/00 ESC P
CSI = Control Sequence Introducer 01/11 05/11 ESC [
ST = String Terminator 01/11 05/12 ESC \
OSC = Operating System Command 01/11 05/13 ESC ]
PM = Privacy Message 01/11 05/14 ESC ^
APC = Application Program Command 01/11 05/15 ESC _
ANSI escape sequence recognizer:
State Input New State ; Commentary
NORMAL (start) ; Start in NORMAL state
(any) CAN NORMAL ; ^X cancels
(any) SUB NORMAL ; ^Z cancels
NORMAL ESC GOTESC ; Begin escape sequence
NORMAL other ; NORMAL control or graphic character
GOTESC ESC ; Start again
GOTESC [ GOTCSI ; CSI
GOTESC P STRING ; DCS introducer, consume through ST
GOTESC ] STRING ; OSC introducer, consume through ST
GOTESC ^ STRING ; PM introducer, consume through ST
GOTESC _ STRING ; APC introducer, consume through ST
GOTESC 0..~ NORMAL ; 03/00 through 17/14 = Final character
GOTESC other ESCSEQ ; Intermediate or ignored control character
ESCSEQ ESC GOTESC ; Start again
ESCSEQ 0..~ NORMAL ; 03/00 through 17/14 = Final character
ESCSEQ other ; Intermediate or ignored control character
GOTCSI ESC GOTESC ; Start again
GOTCSI @..~ NORMAL ; 04/00 through 17/14 = Final character
GOTCSI other ; Intermediate char or ignored control char
STRING ESC TERMIN ; Maybe have ST
STRING other ; Consume all else
TERMIN \ NORMAL ; End of string
TERMIN other STRING ; Still in string
*/
/*
chkaes() -- Check ANSI Escape Sequence.
Call with EACH character in input stream.
Sets global inesc variable according to escape sequence state.
*/
VOID
#ifdef CK_ANSIC
chkaes(char c)
#else
chkaes(c) char c;
#endif /* CK_ANSIC */
/* chkaes */ {
oldesc = inesc; /* Remember previous state */
if (c == CAN || c == SUB) /* CAN and SUB cancel any sequence */
inesc = ES_NORMAL;
else /* Otherwise */
switch (inesc) { /* enter state switcher */
case ES_NORMAL: /* NORMAL state */
if (c == ESC) /* Got an ESC */
inesc = ES_GOTESC; /* Change state to GOTESC */
break; /* Otherwise stay in NORMAL state */
case ES_GOTESC: /* GOTESC state */
if (c == '[') /* Left bracket after ESC is CSI */
inesc = ES_GOTCSI; /* Change to GOTCSI state */
else if (c == 'P' || (c > 0134 && c < 0140)) { /* P, [, ^, or _ */
inesc = ES_STRING; /* Switch to STRING-absorption state */
#ifdef CK_APC
if (c == '_' && apcstatus != APC_OFF) { /* APC */
debug(F100,"APC begin","",0);
apcactive = 1; /* Set APC-Active flag */
apclength = 0; /* and reset APC buffer pointer */
}
#endif /* CK_APC */
} else if (c > 057 && c < 0177) /* Final character '0' thru '~' */
inesc = ES_NORMAL; /* Back to normal */
else if (c != ESC) /* ESC in an escape sequence... */
inesc = ES_ESCSEQ; /* starts a new escape sequence */
break; /* Intermediate or ignored ctrl char */
case ES_ESCSEQ: /* ESCSEQ -- in an escape sequence */
if (c > 057 && c < 0177) /* Final character '0' thru '~' */
inesc = ES_NORMAL; /* Return to NORMAL state. */
else if (c == ESC) /* ESC ... */
inesc = ES_GOTESC; /* starts a new escape sequence */
break; /* Intermediate or ignored ctrl char */
case ES_GOTCSI: /* GOTCSI -- In a control sequence */
if (c > 077 && c < 0177) /* Final character '@' thru '~' */
inesc = ES_NORMAL; /* Return to NORMAL. */
else if (c == ESC) /* ESC ... */
inesc = ES_GOTESC; /* starts over. */
break; /* Intermediate or ignored ctrl char */
case ES_STRING: /* Inside a string */
if (c == ESC) /* ESC may be 1st char of terminator */
inesc = ES_TERMIN; /* Go see. */
#ifdef CK_APC
else if (apcactive && (apclength < apcbuflen)) /* If in APC string */
apcbuf[apclength++] = c; /* deposit this character */
#endif /* CK_APC */
break; /* Absorb all other characters. */
case ES_TERMIN: /* May have a string terminator */
if (c == '\\') { /* which must be backslash */
inesc = ES_NORMAL; /* If so, back to NORMAL */
#ifdef CK_APC
if (apcactive) { /* If it was an APC string, */
apcbuf[apclength] = NUL; /* terminate it and then ... */
debug(F111,"APC complete",apcbuf,apclength);
printf("\r\n"); /* prevent CR-overstriking and... */
ckcputf(); /* flush screen-output buffer and... */
active = 0; /* exit from the terminal emulator.. */
return; /* with the apcactive flag still set */
}
#endif /* CK_APC */
} else { /* Otherwise */
inesc = ES_STRING; /* Back to string absorption. */
#ifdef CK_APC
if (apcactive && (apclength+1 < apcbuflen)) { /* In APC string */
apcbuf[apclength++] = ESC; /* deposit the Esc character */
apcbuf[apclength++] = c; /* and this character too */
}
#endif /* CK_APC */
}
}
}
#endif /* NOESCSEQ */
static char *ibp; /* Input buffer pointer */
static int ibc; /* Input buffer count */
#define IBUFL 1024 /* Input buffer length */
static char *obp; /* Output buffer pointer */
static int obc; /* Output buffer count */
#define OBUFL 1024 /* Output buffer length */
#ifdef DYNAMIC
static char *ibuf = NULL, *obuf = NULL; /* Line and temp buffers */
#else
static char ibuf[IBUFL], obuf[OBUFL];
#endif /* DYNAMIC */
char kbuf[10], *kbp; /* Keyboard buffer */
/* C O N E C T -- Perform terminal connection */
int inshift, outshift; /* SO/SI shift states */
/* C K C P U T C -- C-Kermit CONNECT Put Character to Screen */
/*
Output is buffered to avoid slow screen writes on fast connections.
*/
int
ckcputf() { /* Dump the output buffer */
int x;
if (obc > 0) /* If we have any characters, */
x = conxo(obc,obuf); /* dump them, */
obp = obuf; /* reset the pointer */
obc = 0; /* and the counter. */
return(x); /* Return conxo's return code */
}
int
ckcputc(c) int c; {
int x;
*obp++ = c & 0xff; /* Deposit the character */
obc++; /* Count it */
if (ibc == 0 || /* If input buffer empty */
obc == OBUFL) { /* or output buffer full */
x = conxo(obc,obuf); /* dump the buffer, */
obp = obuf; /* reset the pointer */
obc = 0; /* and the counter. */
return(x); /* Return conxo's return code */
} else return(0);
}
/* C K C G E T C -- C-Kermit CONNECT Get Character */
/*
Buffered read from communication device.
Returns the next character, refilling the buffer if necessary.
On error, returns ttinc's return code (see ttinc() description).
Dummy argument for compatible calling conventions with ttinc().
NOTE: We don't have a macro for this because we have to pass
a pointer to this function as an argument to tn_doop().
*/
int
ckcgetc(dummy) int dummy; {
int c, n;
if (ibc > 0) { /* Have buffered port characters */
src = 1; /* Say source is port */
c = *ibp++ & 0xff; /* Get next character */
ibc--; /* Reduce input buffer count */
debug(F101,"CKCGETC buffered port char","",c);
return(c); /* Return buffered port character */
} else { /* Need to refill buffer */
contti(&c, &src); /* Read one character */
if (src < 0) { /* If error, return error code */
return(src);
} else if (src == 0) { /* Got a character from the keyboard */
debug(F101,"CKCGETC keyboard char","",c);
return(c);
} else { /* Got a port character */
ibp = ibuf; /* Reset buffer pointer */
*ibp++ = c; /* Deposit the character */
ibc++; /* and count it */
if ((n = ttchk()) > 0) { /* Any more characters waiting? */
if (n > (IBUFL - ibc)) /* Get them all at once. */
n = IBUFL - ibc; /* Don't overflow the buffer */
if ((n = ttxin(n,(CHAR *)ibp)) > 0) /* Read waiting chars */
ibc += n; /* Advance counter */
}
ibp = ibuf; /* Reset buffer pointer again */
c = *ibp++ & 0xff; /* Get first character from buffer */
ibc--; /* Reduce buffer count */
debug(F101,"CKCGETC port char","",c);
return(c); /* Return the character */
}
}
}
int
conect() {
int c; /* c is a character, but must be signed
integer to pass thru -1, which is the
modem disconnection signal, and is
different from the character 0377 */
int c2, csave; /* Copies of c */
char errmsg[50], *erp, *cp;
int n, x; /* Workers */
if (!local) {
#ifdef NETCONN
printf("Sorry, you must SET LINE or SET HOST first\n");
#else
printf("Sorry, you must SET LINE first\n");
#endif /* NETCONN */
return(-2);
}
if (batch) {
printf("\n\
Sorry, Kermit's CONNECT command can be used only on a real terminal.\n");
printf("If this is not a batch a job, then you must:\n\n");
printf("$ DEFINE SYS$INPUT SYS$COMMAND\n\n");
printf("in your DCL command procedure before starting Kermit.\n\n");
return(0);
}
#ifdef TCPSOCKET
if (network && (nettype != NET_TCPB)) {
printf("Sorry, network type not supported yet\n");
return(0);
}
#endif /* TCPSOCKET */
if (speed < 0 && network == 0) {
printf("Sorry, you must SET SPEED first\n");
return(-2);
}
if ((escape < 0) || (escape > 0177)) {
printf("Your escape character is not ASCII - %d\n",escape);
return(-2);
}
if (ttyfd < 0) { /* If communication device not open */
debug(F111,"ckvcon opening",ttname,0); /* Open it now. */
if (ttopen(ttname,
&local,
network ? -nettype : mdmtyp,
0
) < 0) {
erp = errmsg;
sprintf(erp,"Sorry, can't open %s",ttname);
perror(errmsg);
debug(F110,"ckvcon open failure",errmsg,0);
return(-2);
}
}
if (!quiet) {
#ifdef NETCONN
if (network) {
printf("\nConnecting to host %s",ttname);
} else {
#endif /* NETCONN */
printf("\nConnecting to %s",ttname);
if (speed > -1L) printf(", speed %ld",speed);
#ifdef NETCONN
}
#endif /* NETCONN */
printf(".\r\nThe escape character is %s (ASCII %d).\r\n",
dbchr(escape),escape);
printf("Type the escape character followed by C to get back,\r\n");
printf("or followed by ? to see other options.\r\n");
if (seslog) {
printf("(Session logged to %s)\r\n",sesfil);
}
if (debses) printf("Debugging Display...)\r\n");
printf("\r\n");
}
/* Condition console terminal and communication line */
if (conbin(escape) < 0) {
printf("Sorry, can't condition console terminal\n");
return(-2);
}
if (ttvt(speed,flow) < 0) {
/* tthang(); */ /* Closing it should be quite enough! */
ttclos(0);
if (ttopen(ttname, /* Open it again... */
&local,
network ? -nettype : mdmtyp,
0
) < 0) {
erp = errmsg;
sprintf(erp,"Sorry, can't reopen %s",ttname);
perror(errmsg);
return(0);
}
if (ttvt(speed,flow) < 0) { /* Try virtual terminal mode again. */
conres(); /* Failure this time is fatal. */
printf("Sorry, Can't condition communication line\n");
return(0);
}
}
debug(F101,"connect ttvt ok, escape","",escape);
#ifdef CK_APC
apcactive = apclength = 0;
#endif /* CK_APC */
#ifndef NOCSETS
/* Set up character set translations */
#ifdef KANJI
/* Kanji not supported yet */
if (fcsinfo[tcsr].alphabet == AL_JAPAN ||
fcsinfo[tcsl].alphabet == AL_JAPAN ) {
tcs = TC_TRANSP;
} else
#endif /* KANJI */
#ifdef CYRILLIC
if (fcsinfo[tcsl].alphabet == AL_CYRIL) {
tcs = TC_CYRILL;
} else
#endif /* CYRILLIC */
tcs = TC_1LATIN;
if (tcsr == tcsl) { /* Remote and local sets the same? */
sxo = rxo = NULL; /* If so, no translation. */
sxi = rxi = NULL;
} else { /* Otherwise, set up */
sxo = xls[tcs][tcsl]; /* translation function */
rxo = xlr[tcs][tcsr]; /* pointers for output functions */
sxi = xls[tcs][tcsr]; /* and for input functions. */
rxi = xlr[tcs][tcsl];
}
/*
This is to prevent use of zmstuff() and zdstuff() by translation functions.
They only work with disk i/o, not with communication i/o. Luckily Russian
translation functions don't do any stuffing...
*/
langsv = language;
#ifndef NOCYRIL
if (language != L_RUSSIAN)
#endif /* NOCYRIL */
language = L_USASCII;
#ifndef NOESCSEQ
/*
We need to activate escape-sequence recognition when:
(a) translation is elected, and:
(b) the local and/or remote set is 7-bit set other than US or UK ASCII, or:
(c) TERMINAL APC is not OFF.
*/
escseq = (tcs != TC_TRANSP) && /* Not transparent */
(fcsinfo[tcsl].size == 128 || fcsinfo[tcsr].size == 128) && /* 7 bits */
(fcsinfo[tcsl].code != FC_USASCII) && /* Not US ASCII */
(fcsinfo[tcsl].code != FC_UKASCII); /* Not UK ASCII */
#ifdef COMMENT
debug(F101,"tcs","",tcs);
debug(F101,"tcsl","",tcsl);
debug(F101,"tcsr","",tcsr);
debug(F101,"fcsinfo[tcsl].size","",fcsinfo[tcsl].size);
debug(F101,"fcsinfo[tcsr].size","",fcsinfo[tcsr].size);
#endif /* COMMENT */
#endif /* NOESCSEQ */
#endif /* NOCSETS */
#ifndef NOESCSEQ
#ifdef CK_APC
escseq = escseq || (apcstatus != APC_OFF);
#endif /* CK_APC */
inesc = ES_NORMAL; /* Initial state of recognizer */
debug(F101,"escseq","",escseq);
#endif /* NOESCSEQ */
#ifdef DYNAMIC
if (!ibuf) {
if (!(ibuf = malloc(IBUFL+1))) { /* Allocate input line buffer */
printf("Sorry, CONNECT input buffer can't be allocated\n");
return(0);
} else {
ibp = ibuf;
ibc = 0;
}
}
if (!obuf) {
if (!(obuf = malloc(OBUFL+1))) { /* Allocate output line buffer */
printf("Sorry, CONNECT output buffer can't be allocated\n");
return(0);
} else {
obp = obuf;
obc = 0;
}
}
#else
ibp = ibuf;
ibc = 0;
obp = obuf;
obc = 0;
#endif /* DYNAMIC */
inshift = outshift = 0; /* Initial SI/SO states */
active = 1;
do { /* Top of big loop */
#ifndef NOSETKEY
/*
Before reading anything from the keyboard, continue expanding the current
active keyboard macro, if any.
*/
if (kmptr) { /* Have active macro */
src = 0; /* Pretend char came from keyboard */
if ((c = (CHAR) *kmptr++) == NUL) { /* but get it from the macro */
kmptr = NULL; /* If no more chars in macro, */
continue; /* reset pointer and continue. */
}
} else /* OTHERWISE... */
#endif /* NOSETKEY */
/*
contti() samples the keyboard and the communication device, in that order,
in what amounts to a busy loop, and does not return until it has something
from one or the other. This drives the VAX crazy, and also gives poor
performance: input is character-at a time, and the keyboard buffer is
checked at least once for every character that comes in from the remote.
Somebody who knows something about VMS, PLEASE FIND A BETTER WAY.
We want a version of contti() that does what select() does in BSD, and we
also want it to be buffered internally, so it doesn't have to call the
operating system for every single input character. And most of all we don't
want it to run a busy loop all the time. No doubt this involves ASTs,
things of which I know nothing. - fdc
*/
c = ckcgetc(0); /* Calls contti()... */
/*
Get here with a character in c, and:
src = -1 Communication error
1 Character from comm line
0 Character from console
*/
if (src < 0) { /* Comm line hangup or other error */
/*
We should check WHY src < 0 and not just dive under for ANY reason.
*/
if (!quiet) printf("\r\nCommunications disconnect ");
active = 0;
} else if (!src) {
/*
Character from console
*/
c &= cmdmsk; /* Do requested masking */
#ifndef NOICP
#ifndef NOSETKEY
/*
Note: kmptr is NULL if we got character c from the keyboard, and it is
not NULL if it came from a macro. In the latter case, we must avoid
expanding it again.
*/
if (!kmptr && macrotab[c]) { /* If a macro is assigned to it */
kmptr = macrotab[c]; /* set up the pointer */
continue; /* and do this again. */
} else c = keymap[c]; /* Else use single-char keymap */
#endif /* NOSETKEY */
#endif /* NOICP */
csave = c;
if (
#ifndef NOICP
#ifndef NOSETKEY
!kmptr &&
#endif /* NOSETKEY */
#endif /* NOICP */
((c & 0x7f) == escape)) { /* Escape character? */
conresne(); /* Restore to normal attributes */
c = coninc(0) & 0177;
doesc(c);
conbin(escape);
} else { /* Ordinary character */
#ifndef NOCSETS
#ifdef NOESCSEQ
/* Translate character sets */
if (sxo) c = (*sxo)(c); /* From local to intermediate. */
if (rxo) c = (*rxo)(c); /* From intermediate to remote. */
#else
if (inesc == ES_NORMAL) { /* If not inside escape seq.. */
/* Translate character sets */
if (sxo) c = (*sxo)(c); /* Local to intermediate. */
if (rxo) c = (*rxo)(c); /* Intermediate to remote. */
}
if (escseq) chkaes(c); /* Check escape sequence status */
#endif /* NOESCSEQ */
#endif /* NOCSETS */
/*
If Shift-In/Shift-Out is selected and we have a 7-bit connection,
handle shifting here.
*/
if (sosi) { /* Shift-In/Out selected? */
if (cmask == 0177) { /* In 7-bit environment? */
if (c & 0200) { /* 8-bit character? */
if (outshift == 0) { /* If not shifted, */
if (ttoc(dopar(SO)) < 0) { /* shift. */
active = 0;
continue;
}
outshift = 1;
}
} else {
if (outshift == 1) { /* 7-bit character */
if (ttoc(dopar(SI)) < 0) { /* If shifted, */
active = 0;
continue;
}
outshift = 0; /* unshift. */
}
}
}
if (c == SO) outshift = 1; /* User typed SO */
if (c == SI) outshift = 0; /* User typed SI */
}
c &= cmask; /* Apply Kermit-to-host mask now. */
if (c == '\015') { /* Carriage Return */
int stuff = -1;
if (tnlm) { /* TERMINAL NEWLINE ON */
stuff = LF; /* Stuff LF */
#ifdef TNCODE
} else if (network && /* TELNET NEWLINE ON/OFF/RAW */
(ttnproto == NP_TELNET) &&
(tn_nlm != TNL_CR)) {
stuff = (tn_nlm == TNL_CRLF) ? LF : NUL;
#endif /* TNCODE */
}
if (stuff > -1) {
ttoc(dopar('\015')); /* Send CR */
if (duplex) conoc('\015'); /* Maybe echo CR */
c = stuff; /* Char to stuff */
csave = c;
}
}
#ifdef TNCODE
/* If user types the 0xff character (TELNET IAC), it must be doubled. */
else
if (dopar(c) == IAC && network && ttnproto == NP_TELNET) {
/* Send one copy now */
ttoc(IAC); /* and the other one just below. */
}
#endif /* TNCODE */
if (ttoc(dopar(c)) < 0) { /* Now send the character. */
active = 0;
continue;
}
if (duplex) { /* Half duplex? */
if (debses) /* Yes, echo locally */
conol(dbchr(csave)); /* in appropriate mode */
else
conoc(csave);
if (seslog) zchout(ZSFILE,c); /* And maybe log it. */
}
}
} else {
/*
Character from communications device or network connection...
*/
#ifdef TNCODE
/* Handle telnet options */
if (network && ttnproto == NP_TELNET && ((c & 0xff) == IAC)) {
ckcputf(); /* Dump output buffer */
if ((x = tn_doop(c & 0xff, duplex, ckcgetc)) == -1 && !quiet)
printf("\r\nCommunications disconnect ");
if (x == 1) duplex = 1; /* Change duplex if necessary. */
if (x == 2) duplex = 0;
if (x == 3) /* Quoted IAC */
c = 255;
else
continue;
}
#endif /* TNCODE */
if (debses) { /* Output character to screen */
char *s; /* Debugging display... */
s = dbchr(c);
while (*s)
ckcputc(*s++);
} else { /* or regular... */
c &= cmask; /* Do first masking */
if (sosi) { /* Handle SI/SO */
if (c == SO) { /* Shift Out */
inshift = 1;
continue;
} else if (c == SI) { /* Shift In */
inshift = 0;
continue;
}
if (inshift) c |= 0200;
}
#ifndef NOCSETS
if (
#ifndef NOESCSEQ
inesc == ES_NORMAL /* If not in an escape sequence */
#else
1
#endif /* NOESCSEQ */
) { /* Translate character sets */
if (sxi) c = (*sxi)((CHAR)c);
if (rxi) c = (*rxi)((CHAR)c);
}
#endif /* NOCSETS */
#ifndef NOESCSEQ
if (escseq) /* If handling escape sequences */
chkaes((char)c); /* update our state */
#ifdef CK_APC
/*
If we are handling APCs, we have several possibilities at this point:
1. Ordinary character to be written to the screen.
2. An Esc; we can't write it because it might be the beginning of an APC.
3. The character following an Esc, in which case we write Esc, then char,
but only if we have not just entered an APC sequence.
*/
if (escseq && apcstatus != APC_OFF) {
if (inesc == ES_GOTESC) /* Don't write ESC yet */
continue;
else if (oldesc == ES_GOTESC && !apcactive) {
ckcputc(ESC); /* Write saved ESC */
if (seslog) zchout(ZSFILE,c);
}
}
#endif /* CK_APC */
#endif /* NOESCSEQ */
if (
#ifdef CK_APC
!apcactive
#else
1
#endif /* CK_APC */
) {
c &= cmdmsk; /* Apply mask */
if (c == CR && tt_crd) { /* SET TERM CR-DISPLA CRLF? */
ckcputc(c); /* Yes, output CR */
if (seslog) zchout(ZSFILE,c);
c = LF; /* and insert a linefeed */
}
ckcputc(c); /* Put it on the screen. */
}
if (seslog) zchout(ZSFILE,c); /* If logging, log it. */
}
}
} while (active);
cancio();
conres();
if (!quiet
#ifdef CK_APC
&& !apcactive
#endif /* CK_APC */
)
printf("\r\n(Back at %s)\r\n",
*myhost ? myhost : "local VMS system");
what = W_NOTHING;
#ifndef NOCSETS
language = langsv; /* Restore language */
#endif /* NOCSETS */
return(1);
}
/* H C O N N E -- Give help message for connect. */
VOID
hconne() {
int c;
static char *hlpmsg[] = {
"\n",
" C to return to C-Kermit prompt, H to hangup and close the connection,\n",
" B to send a BREAK, L to send a Long BREAK,\n",
#ifdef TNCODE
" A to send TELNET Are You There, I to send TELNET Interrupt,\n",
#endif /* TNCODE */
" 0 (zero) to send a null, X to send an XON,\n",
#ifdef NOPUSH
" S for status of connection, ? for this message, or:\n",
#else
" @ to enter DCL, S for status of connection,\n",
" ? for this message, or:\n",
#endif /* NOPUSH */
" \\ to begin a backslash escape:\n",
" \\nnn (decimal character code)\n",
" \\Onnn (octal character code)\n",
" \\Xhh (hexadecimal character code)\n",
" Terminate with carriage return.\n\n",
" Type the escape character again to send the escape character, or\n",
" press the space-bar to resume the CONNECT command.\n\n",
"" };
/*
Need to save term characteristics/ allow disable binary mode
print message, get text and then restore previous state.
*/
conol("\r\nPress C to return to ");
conol(*myhost ? myhost : "the C-Kermit prompt");
conoll(", or:");
conola(hlpmsg); /* Print the help message. */
conol("Command>"); /* Prompt for command. */
c = coninc(0) & 0x7f;
conoc(c); /* Echo it. */
if (c != CMDQ)
conoll("");
doesc(c);
}
/* D O E S C -- Process an escape character argument */
VOID
#ifdef CK_ANSIC
doesc(register unsigned char c)
#else
doesc(c) register unsigned char c;
#endif /* CK_ANSIC */
/* doesc() */ {
int d;
char sbuf[35];
c &= 0177; /* Mask off 8th bit */
if (c == escape) { /* If it's the escape character, */
d = dopar(c); /* just send it. */
ttoc(d);
return;
}
if (isupper(c)) c = tolower(c); /* Convert to lowercase letter. */
if (iscntrl(c)) c += 'a' - '\001';
switch (c) { /* Take requested action. */
case 'b':
ttsndb(); /* Send a BREAK signal */
break;
#ifdef TNCODE
case 'i': /* Send TELNET interrupt */
#ifndef IP
#define IP 244
#endif /* IP */
if (network && ttnproto == NP_TELNET) { /* TELNET */
CHAR temp[3];
temp[0] = IAC; /* I Am a Command */
temp[1] = IP; /* Interrupt Process */
temp[2] = NUL;
ttol((CHAR *)temp,2);
} else conoc(BEL);
break;
case 'a': /* "Are You There?" */
case '\01':
#ifndef AYT
#define AYT 246
#endif /* AYT */
if (network && ttnproto == NP_TELNET) {
CHAR temp[3];
temp[0] = IAC; /* I Am a Command */
temp[1] = AYT; /* Are You There? */
temp[2] = NUL;
ttol((CHAR *)temp,2);
} else conoc(BEL);
#endif /* TNCODE */
break;
case 'c': /* Return to prompt */
active = 0;
conol("\r\n");
break;
case 'h': /* Hang up the connection */
#ifndef NODIAL
if (mdmhup() < 1) /* Try via modem first, otherwise */
#endif /* NODIAL */
tthang(); /* the old-fashioned way. */
conol("\r\nHanging up ");
break;
case 'l': /* Send a Long BREAK signal */
ttsndlb();
break;
case 's': /* Status */
sprintf(sbuf,"Connected thru %s",ttname);
conol(sbuf);
sprintf(sbuf,", speed: %d",speed);
conol(sbuf);
if (seslog) {
sprintf(sbuf,", logging file: %s",sesfil);
conol(sbuf);
}
conoll("");
break;
#ifndef NOPUSH
case '!':
case '@':
conres(); /* Put console back to normal */
zshcmd(""); /* Start DCL. */
if (conbin(escape) < 0) {
printf("Error returning to remote session\n");
active = 0;
}
return;
#endif /* NOPUSH */
case 'x': /* XON */
/*
NOTE: Here we should also issue QIO's to clear XOFF deadlock.
*/
ttoc(dopar(XON));
break;
case '?': /* Give Help */
hconne();
break;
case '0': /* Send a NULL */
c = '\0';
d = dopar(c);
ttoc(d);
break;
case SP: /* Ignore space */
break;
default:
if (c == CMDQ) { /* Backslash escape */
int x;
kbp = kbuf;
*kbp++ = c;
while (((c = (coninc(0) & cmdmsk)) != '\r') && (c != '\n'))
*kbp++ = c;
*kbp = NUL; kbp = kbuf;
x = xxesc(&kbp);
if (x >= 0) {
c = dopar(x);
ttoc(c);
return;
} else {
conoc(BEL);
return;
}
}
conoc(BEL); return; /* Invalid esc arg, beep */
}
}