home *** CD-ROM | disk | FTP | other *** search
/ 8bitfiles.net/archives / archives.tar / archives / genie-commodore-file-library / Information / C64-CPM-CARTRIDGE-PART2 < prev    next >
Encoding:
Text File  |  2019-04-13  |  4.6 KB  |  128 lines

  1.  
  2. **********
  3. Topic 28        Sat Sep 27, 1986
  4. W.SMITH [Grandizer]          at 16:04 EDT
  5. Sub: CP/M modules                           
  6.  
  7. I need help on the use of a cp/m module and the software with it. Any 
  8. suggestions
  9.                William Sint
  10.                Grandizer
  11. ----------
  12. Category 11,  Topic 28
  13. Message 1         Sat Sep 27, 1986
  14. MICHAEL.M                    at 17:53 EDT
  15.  
  16. William -  What exactly do you mean by 'CP/M Module'?  And which
  17. computer are you using? A C-64 or a C-128?
  18.  
  19. If you are just getting started in CP/M on the C128, you might
  20. want to download and read the CP/M Primer articles that have
  21. been a part of the StarBoard Journal here in the FlagShip
  22. software libraries.  The file numbers are #1703 and #2146.
  23.  
  24. Other sources of CP/M information can be found in the CP/M
  25. Roundtable at page 685 here on GEnie, where we have our own
  26. software library and bulletin board area dealing with the C-128.
  27. There are alot of knowledgeable folks there that are more than
  28. willing to answer any questions you might have.
  29.  
  30. If you're looking for paperback publications to help you get
  31. started in CP/M, I can recommend two good books:
  32. CP/M Users Guide - by ABACUS
  33. The CP/M Plus Handbook - by Alan R. Miller
  34.  
  35. And, of course, you can always just post a message here in this
  36. category stating what you'd like to know!  We're always glad
  37. to help!
  38.  
  39. -Mike
  40. ----------
  41. Category 11,  Topic 28
  42. Message 3         Sun Sep 28, 1986
  43. W.SMITH [Grandizer]          at 16:09 EDT
  44.  
  45. Sorry for being so blunt but I have a C-64 with a CP/M module ( I got it cheap) 
  46. and i am having trouble getting the 
  47. disk to boot and I could use all the help I can getyt.    
  48. ----------
  49. Category 11,  Topic 28
  50. Message 4         Sun Sep 28, 1986
  51. WHIRT [WDHIRT]               at 20:36 CDT
  52.  
  53. Bad news maybe for the 64 and CP/M Cart. Unless you have an ancient
  54. 64 (older than about 2 1/2 years), the probability of the CP/M
  55. cart working on the 64 is less than 50/50. That's why the CP/M
  56. cart is no longer sold and all remaining carts were supposedly
  57. recalled by Commodore. A change was made in the 64 circuitry with
  58. 64 revison 5 I think that no longer insured compatibility with the
  59. CP/M. Rev 5 64's have been mfgd since around spring 84 if my
  60. memory serves me right.
  61.                                            Bill
  62. ----------
  63. Category 11,  Topic 28
  64. Message 5         Wed Oct 01, 1986
  65. W.SMITH [Grandizer]          at 21:14 EDT
  66.  
  67. Could you pleasse tell me about the changes as I am somewhat of a hardware nut 
  68. nad
  69.               WBS
  70. ----------
  71. Category 11,  Topic 28
  72. Message 6         Thu Oct 02, 1986
  73. DEB [*deb!*]                 at 04:31 EDT
  74.  
  75. The changes?!?   <<gulp>>
  76.   
  77.     It was just a *small* thing, they relaxed the timing specs of the 
  78. VIC chip ... and that was all it took.
  79.   
  80.        Its *RIP* for that CP/M cart!   Commodore Customer Support line
  81. may have some info for you about all this, BUT, even inthe best of
  82. situations, the CP/M on the 64 was not compatible with much of anything,
  83. PD, commercial or whatever.
  84.   
  85.      Running around here somewhere are some of the pioneers of the C-64
  86. CP/M cartridge like Chris Lampton <CFLAMPTON, i think> and Frank Prindle
  87. <PRINDLE, i believe>...in fact, they may be reading this.  <<Hi guys>>
  88.   
  89.      What were the problems with the C-64 CP/M?  Well, besides a not-quite
  90. standard CP/M version, 40 columns and a Commodore formatted disk, there was
  91. also the matter of processor switching on the serial bus, and other little
  92. niceties.
  93.   
  94.         *deb!*
  95. ----------
  96. Category 11,  Topic 28
  97. Message 7         Sat Oct 04, 1986
  98. WHIRT [WDHIRT]               at 20:08 CDT
  99.  
  100. It was great for messing around with. Chris Lampton wrote a dandy
  101. 80 column program using the hi-res mode of the 64 which was very
  102. usable with a green screen monitor. I tell you though that you
  103. really had to want to putz around with it because working with
  104. 1541 was agonizing slow. There was also the great CBM error of
  105. writing the BIOS so only 1 1541 drive would work in CP/M mode 
  106. (Fortunately, a pd patch was created to solve the problem). Unless
  107. you have an old 64 and access to IEEE drives, forget about CP/M
  108. on the 64 and go to the 128. The implementation on the 128 is
  109. a 1000 times better.
  110.                                        Bill
  111. ----------
  112. Category 11,  Topic 28
  113. Message 8         Sun Oct 05, 1986
  114. DEB [*deb!*]                 at 01:24 EDT
  115.  
  116. Bill....hahaha, I had forgotten all about the 1 drive situation!  Yes,
  117. I remember the days....
  118. ----------
  119. Category 11,  Topic 28
  120. Message 9         Sat Oct 11, 1986
  121. W.SMITH [Grandizer]          at 00:09 EDT
  122.  
  123. Ok, I guess I have a expansion port card and a z-80 ti o play with!
  124. Thanks for all the help....
  125.  
  126. ----------
  127.  
  128.