home *** CD-ROM | disk | FTP | other *** search
- CBTerm Customizer
-
-
-
- The CBTerm Customizer was written to allow users to create their
- own customized versions of CBTerm. It was designed to be as easy to
- use as CBTerm itself.
-
- With the CBTerm Customizer the user can set all of the desired
- paramaters he/she wants to have whenever CBTerm is loaded:
-
- -Any color settings
- -40 or 80 Col Mode
- -Ram Buffer Opened/Closed
- -7/8 Bit Words
- -Positive or Negative Dialing Mode
- -Default Printer Secondary Address
- -300/1200 Baud (If <CR> to Prompt)
- -Batch Xmit On/Off
- -Default User Fkeys (CBTerm 5.0 Only)
- -Clock Display 0n/Off
- -Caps On/Off (CBTerm 4.9 or 5.0 Only)
- -Parity (CBTerm 5.0 Only)
-
-
- Note: Although the Clock can be displayed with versions of CBTerm
- prior to 5.0, it will not start on Power-Up until the C=J key is used
- to set the time.
-
-
- To use the CBTerm Customizer it can be loaded like any other
- overlay. Version 5.0 allows overlays to be loaded with C=L key. The
- Customizer will also work with earlier versions of CBTerm- Load it
- like any other overlay as follows:
-
- Load CBTCust,8,1 (or The Name you saved it as)
- New
- Load CBTerm
- Run
-
-
- Once Loaded all paramaters can be set with the C= (Commodore) Key.
- See C=H for help in setting paramaters. When you are happy with all
- the settings hit the C=\ (Pound Sign) key. This will exit to Basic
- where the New Version can be saved. If you have Epyx's fastload
- cartridge plugged in it will still be enabled. DO NOT destroy your old
- version, until you have tried out the new one for at least a couple of
- weeks. You can return to CBTerm just by typing: Run.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- CBTerm Customizer
-
-
-
-
- Here are the Key settings you can use with the C= (Commodore)
- key to Set Paramaters:
-
- C=A Send Line Feed after <Cr>
- B Batch Xmit in 80 Column Mode
- C Close Ram Buffer
- E Add Line Feed for Received Data
- F Assume Ram is Ascii/Petscii
- I Default Word Length: 7/8 Bits
- J Set Clock Display.
- (Time Displayed at Power on Cannot Be Set)
- K Clock Display On/Off
- M Mask Local Line Feeds
- O Open Ram Buffer
- V Set Printer Secondary Address
- X Full/Half Duplex
- 4 40 Column Mode
- 7 Toggle 300/1200 Baud Rate
- 8 80 Column Mode
- 9 Parity Toggle (CBTerm 5.0 Only)
- ^ (Up Arrow-) Capitals Mode On/Off -CBTerm 4.9 or 5.0 Only
- f7 User Keys On/Off (User keys saved with CBTerm 5.0 Only)
- f8 Load User Keys (User keys saved with CBTerm 5.0 Only)
- + Step Foreground Colors
- - Step Screen Colors
- @ 40 Col Mode: Step Border Color
- 80 Col Mode: Step Char Color in Bottom Line
- * 40 Col Mode: Start/Stop Cursor Flash
- 80 Col Mode: Step Line Color in Bottom Line
-
-
- Note: Steping Border Color in 40 Column mode also sets Border for
- the 80 column mode.
-
-
-
-
- Tony Romer, Edmonton, Alberta, Canada
- 76606-364
-
-
- ┼