├ERTAIN FEATURES OF THIS ┬┬╙ ARE AVAILABLE ONLY TO CONTRIBUTING MEMBERS. ╘HIS FILE CONTAINS INFORMATION ABOUT HOW TO BECOME A ═EMBER.
╘HE ├OMMODORE ╔NFORMATION ┼XCHANGE WAS ESTABLISHED TO PROMOTE FREE EXCHANGE OF INFORMATION AND NEW ╨UBLIC ─OMAIN SOFTWARE FOR ALL ├OMMODORE ├OMPUTERS.
╘HE ┬┬╙ OFFERS THREE DISTINCT SECTIONS FOR USE BY CALLERS:
1) ╨UBLIC & ╨RIVATE ═ESSAGING.
2) ┬ULLETINS & ┴RTICLES.
3) ╒P/─OWN ╠OADING OF ╨UBLIC
─OMAIN ╙OFTWARE.
╔T IS EASY TO BECOME A ├ONTRIBUTING ═EMBER OF THIS ┬┬╙. ┴LL YOU HAVE TO DO IS CONTRIBUTE! ╔N OTHER WORDS, BE WILLING TO GIVE, AS WELL AS TAKE.
┘OU CAN BECOME A ═EMBER BY:
1) ╚ELPING TO ANSWER MESSAGES FROM OTHER USERS WHO HAVE QUESTIONS OR, BY WRITING MESSAGES THAT CONTAIN GENERAL OR SPECIFIC INFORMATION THAT WOULD BE HELPFUL TO OTHERS.
2) ┴NOTHER WAY WOULD BE TO CONTRIBUTE BULLETINS OR ARTICLES TO THE ┬ULLETIN ╙ECTION. ╘HESE COULD BE ON A WIDE VARIETY OF TOPICS SUCH AS PROGRAMMING TIPS, EDITORIALS, MOVIE REVIEWS, OR ANYTHING THAT WOULD BE OF INTEREST TO OTHER USERS.
3) ╞INALLY, YOU CAN ALSO PARTICIPATE BY UPLOADING ╨UBLIC ─OMAIN PROGRAMS THAT YOU HAVE WRITTEN OR GOTTEN FROM ├OMPU╙ERVE, OR OTHER ┬┬╙'S. ╘HERE ARE A LOT OF NEW ONES OUT THERE!
─O YOU THINK THAT YOU ARE MAKING AN ON-GOING CONTRIBUTION TO THE POOL OF INFORMATION AND TO THE OVERALL QUALITY OF *OUR* ┬┬╙? ╘HEN ALL YOU NEED TO DO IS BE SURE THAT YOU HAVE LOGGED ON USING YOUR REAL NAME, LEAVE A MESSAGE ADDRESSED TO "═┼═┬┼╥╙╚╔╨" WITH YOUR MAILING ADDRESS AND PHONE NUMBER, AND WE'LL HAVE A LOOK.
╨LEASE NOTE: ┘OUR MESSAGE MUST BE ADDRESSED TO "═┼═┬┼╥╙╚╔╨".
├OMMAND > B
┬ULLETIN ╙ECTION:
╘OPIC ┼NTER
----- -----
╬EW ╒SER ╔NFORMATION.............╬╒
┬┬╙ ═EMBERSHIP ╔NFORMATION.......═╔
╙YSTEM ─OCUMENTATION.............╙┘╙
╟╧ ├OMMODORE ╒SERS ╟ROUP.........╟╧├├
├OMPUTER ╚UMOR...................╚╒═╧╥
╟ETTING A ╘ERMINAL ╨ROGRAM.......╘┼╥═
├OMMAND (┬) > SYS
--------------------------------------
╙┘╙╘┼═ ─╧├╒═┼╬╘┴╘╔╧╬ ┴╬─ ╔╬╞╧
(07/15/84)
--------------------------------------
╘OPIC ┼NTER
----- -----
═ESSAGE ┼DITOR...................┼─╔╘
┴BORT ╙EQUENCES..(╨╠┼┴╙┼ ╥┼┴─!)..┴╙
═ESSAGE ╥EFERENCE ╬UMBERS........╥┼╞
═ESSAGE ╞ORWARDING...............╞╫─
┴BOUT ╨UNTER ╨ROTOCOL............╨╥╧╘
┬UYING AND ╥UNNING THIS ┬┬╙......┬┬╙64
─ETAILED DESCRIPTIONS FOR VARIOUS ┬┬╙ COMMANDS MAY BE LISTED BY ENTERING THE APPROPRIATE COMMAND NAME BELOW:
╘OPIC ┼NTER
----- -----
╠╧┴─ (─OWNLOAD)..................╠╧┴─
╙┴╓┼ (╒PLOAD)....................╙┴╓┼
├ONTINUOUS/╬ON-├ONTINUOUS ═ODES..├╧╬╘
╠ISTING ┴VAILABLE ╨ROGRAMS.......╠╔╙╘
╥EAD NEW ═ESSAGES TO YOU.........╥┼┴─
╥EAD ALL ╬EW ═ESSAGES............╬┼╫
╘O GET A ═ESSAGE ╙UMMARY.........╙
├ONTINUE ═ESSAGE ╥EADING.........╬┼╪╘
├OMMAND (┬) > PROT
--------------------------------------
╒PLOAD/─OWNLOAD ╨ROTOCOL
--------------------------------------
╘HE FOLLOWING DOCUMENTATION WILL COVER THE PROTOCOL USED BY ┴╠╠ ┬┬╙'S OF THIS TYPE, AND WILL HEREBY BE REFERRED TO AS THE ╨UNTER ╘RANSFER ╨ROTOCOL.
┴╙├╔╔ ╞ILES
-----------
╔N ORDER TO ALLOW COMPLETE COMPATABILITY WITH ALL MODEMS AND COMPUTERS, A 7-BIT TRANSMISSION CODE HAS BEEN ADOPTED INSTEAD OF AN 8-BIT. ╔N ORDER TO ALLOW 8-BIT DATA TO BE TRANSFERRED, IT MUST FIRST BE CONVERTED INTO AN ┴╙├╔╔ TYPE FILE (THIS CAN BE DONE AS A SEPARATE OPERATION, OR AT THE TIME OF TRANSMISSION). ╘O CONVERT TO AN ┴╙├╔╔ FILE, THE FOLLOWING IS DONE TO EACH BYTE:
╘REAT THE BYTE AS A HEX NUMBER (EG: ┴5, ╞╞, 03, ┬╞, ETC...). ╘AKE THE LOW ORDER PART AND STORE IT AS ┴╙├╔╔, THEN TAKE THE HIGH ORDER PART AND STORE IT AS ┴╙├╔╔. ╞OR EXAMPLE, THE BYTE '┴5' WOULD BE STORED AS '5' (DECIMAL 53) AND '┴' (DECIMAL 65).
┴SSUME YOU WISH TO SEND THE FOLLOWING STREAM OF 5 BYTES:
┴5 ┬7 05 4├ 8─
╘HEY WOULD BE CONVERTED INTO THE FOLLOWING STREAM OF CHARACTERS:
5┴7┬50├4─8
WHICH IS THE FOLLOWING STREAM OF BYTES (IN HEX):
35 41 37 42 35 30 43 34 44 38
┴LSO NOTE THAT THIS REDUCES THE POSSIBLE BYTES TO BE TRANSMITTED TO 0 THRU 9, ┴ THRU ╞.
┬LOCK ╙TRUCTURE
---------------
╘HE PROGRAM, NOW IN AN ┴╙├╔╔ FORM, IS READY FOR TRANSMISSION. ╔T WILL BE SENT OUT IN 254 CHARACTER BLOCKS PLUS A TWO BYTE (14 BIT) CHECKSUM. ┼ACH BLOCK WILL BE STRUCTURED AS FOLLOWS:
1 254 255 256
! ! ! !
-------/------ --------
┴╙├╔╔ BYTES ╠O ╚I
├HECKSUM
┬YTES 1 TO 254 ARE ┴╙├╔╔ BYTES (OF THE PROGRAM BEING TRANSMITTED), WHILE BYTES 255 AND 256 ARE THE ╠OW ╧RDER, THEN ╚IGH ╧RDER BYTES OF THE CHECKSUM.
├HECKSUM ├ALCULATION
--------------------
╘HE CHECKSUM OF A BLOCK IS CALCULATED BY FIRST DOING A 2 BYTE ADDITION OF EACH OF THE 254 ┴╙├╔╔ BYTES. ╘HE ╚IGH ╧RDER BYTE OF THIS SUM COULD NEVER BE 8 BIT, SO THERE IS NOTHING TO WORRY ABOUT THERE, BUT THE ╠OW ╧RDER BYTE COULD BE. ╘O REMEDY THIS, CHECK THE HIGHEST BIT IN THE ╠OW ╧RDER BYTE OF THE CHECKSUM. ╔F IT IS SET, ADD ONE TO THE ╚IGH ╧RDER BYTE, BUT IF CLEAR, ADD ZERO TO THE ╚IGH ╧RDER BYTE. ╬OW CLEAR THE HIGHEST BIT IN THE ╠OW ╧RDER BYTE OF THE CHECKSUM TO INSURE THAT IS ONLY 7 BIT.
╘HE ╞INAL ┬LOCK
---------------
╙INCE PROGRAMS DO NOT CONVENIENTLY WORK OUT TO MULTIPLES OF 254 BYTES, THE LAST BLOCK OF THE PROGRAM IS ALMOST SURELY GOING TO BE LESS THAN 254 BYTES IN LENGTH. ╘O REMEDY THIS, FILL IN ALL UNUSED BYTES OF THE 254 ┴╙├╔╔ POSITIONS IN THE BLOCK WITH HEX $77 (77╚ WHATEVER). ╘HE CHECKSUM IS CALCULATED AS USUAL.
╙ENDING (╒PLOADING)
-------------------
╞IRST OFF, YOU ARE GOING TO HAVE TO TELL THE ┬┬╙ WHAT KIND OF FILE YOU ARE ABOUT TO ╒╨╠╧┴─ (╫ORD╨RO, ╙EQUENCIAL, OR ╨ROGRAM). ╫HEN YOU HAVE YOUR FILE OPEN AND READY TO SEND, TRANSMIT TEN (10) ╫'S, ╙'S, OR ╨'S (DEPENDING UPON THE TYPE OF FILE BEING SENT). ╬OW WAIT FOR THE ┬┬╙ TO TELL YOU IT IS READY TO GO.
╫HEN A '╒' COMES ACROSS THE MODEM, THROW AWAY ALL FOLLOWING CHARACTERS, IT IS TIME TO BEGIN ╒╨╠╧┴─╔╬╟.
╞ILL POSITIONS 1 THROUGH 254 OF THE BLOCK BUFFER WITH BYTES FROM YOUR ┴╙├╔╔ FILE (OR FROM THE PROGRAM, DOING ONLINE CONVERSION). ├ALCULATE THE CHECKSUM AND PLACE IT IN BYTES 255 AND 256. ╬OW YOU MUST CLEAR YOUR MODEM OF ANY BUFFERED CHARACTERS (THE BEST WAY TO DO THIS IS TO READ CHARACTERS UNTIL YOU RECEIVE NO MORE). ╫AIT FOR ABOUT 0.2 SECONDS, THEN START TRANSMITTING THE BLOCK, FOLLOWING IT WITH TEN (10) PADDING CHARACTERS (ANY 7-BIT CHARACTER WILL DO. ╔ PERSONALLY USE ┌'S). ╘HESE EXTRA CHARACTERS WILL ENSURE THE ┬┬╙ RECEIVES A FULL 256 BYTES, EVEN IF SOME ARE LOST DUE TO A BAD LINE. ╬╧╘┼: ╘HE 0.2 SECOND WAIT TIME IS VITAL!
╬OW START READING YOUR MODEM UNTIL YOU RECEIVE EITHER A DECIMAL 29 (╚┼╪ $1─) OR A DECIMAL 17 (╚┼╪ $11). ╔F THE CHARACTER RECEIVED WAS A DECIMAL 17, THE ┬┬╙ IS TELLING YOU THE BLOCK WAS NOT RECEIVED CORRECTLY, SO BRANCH BACK AND RE-SEND THE BLOCK (INCLUDING THE 0.2 SECOND DELAY).
╔F YOU RECEIVED A DECIMAL 29, THE ┬┬╙ IS TELLING YOU THAT THE BLOCK WAS ╧╦, AND IT IS READY FOR THE NEXT. ╟O BACK AND FILL IN THE NEXT BLOCK.
╧NCE YOU'VE TRANSMITTED THE LAST BLOCK, ┴╬─ RECEIVED AN ╧╦ SIGNAL FROM THE ┬┬╙, CLEAR YOUR MODEM BUFFER (VERY IMPORTANT) AND RETURN TO TERMINAL MODE.
╥ECEIVING (─OWNLOADING)
-----------------------
╔T WILL NOT BE POSSIBLE TO OPEN THE FILE TO WHICH THE INCOMING DATA WILL BE SENT UNTIL YOU KNOW WHAT TYPE OF FILE YOU ARE GETTING. ╔N ORDER TO GET THE ┬┬╙ TO TELL WHAT TYPE, SEND 10 CONSECUTIVE LETTER ╒'S. ╔MMEDIATELY, THE ┬┬╙ WILL SEND BACK A '╫' (FOR ╫ORD╨RO), A '╨' (FOR ╨ROGRAM), OR AN '╙' (FOR ╙EQUENTIAL). ╘HROW AWAY ALL EXTRA CHARACTERS, OPEN YOUR FILE, THEN TRANSMIT 10 CONSECUTIVE ╘'S. ─╧╫╬╠╧┴─╔╬╟ WILL NOW BEGIN.
╞IRST, ENSURE THAT YOUR MODEM BUFFER IS CLEAR (THE BEST WAY TO DO THAT IS TO READ THE MODEM UNTIL NO MORE CHARACTERS ARE RECEIVED). ─ON'T WORRY ABOUT INADVERTANTLY CLEARING THE ┬╠╧├╦ AS WELL, THE ┬┬╙ HAS A 0.2 SECOND WAIT TIME TO ALLOW THIS OPERATION ON YOUR PART.
╬OW SET UP A ROUTINE TO RECEIVE AND BUFFER 256 CHARACTER, BUT ALSO BUILD IN A TIME-OUT CAPABILITY. ╫HAT ╔ MEAN BY TIME OUT IS, THAT IF NO CHARACTER IS RECEIVED FOR AT LEAST 3 SECONDS, A TIME-OUT HAS OCCURED. ╔F A TIME-OUT IS NOTICED, THE ┬┬╙ HAS NO MORE BLOCKS TO SEND (THIS CAN OCCUR IN TWO WAYS, AS YOU WILL SOON SEE).
┴S YOU DO WHEN ╒PLOADING, THE ┬┬╙ SENDS 10 EXTRA 'PADDING' CHARACTERS ALONG WITH THE BLOCK TO ENSURE THAT YOU RECEIVE A FULL 256 CHARACTERS, EVEN IF SOME ARE LOST BECAUSE OF A BAD LINE. ┘OU MUST THROW THESE CHARACTERS AWAY BEFORE DOING ANYTHING ELSE!
╒SING THE METHOD DESCRIBED UNDER '├ALCULATING THE ├HECKSUM', WORK IT OUT AND COMPARE IT WITH BYTES 255 AND 256 OF THE RECEIVED BLOCK. ╔F THEY MATCH, PUT THE 254 ┴╙├╔╔ BYTES ON DISK (OR DO ONLINE CONVERSION AND STORE AS PROGRAM), THEN SEND 10 CONSECUTIVE DECIMAL 29'S TO TELL THE ┬┬╙ THE BLOCK WAS ╧╦. (╘EN ARE SENT TO ENSURE THAT AT LEAST ONE GETS THERE).
╔F THE CHECKSUMS DO NOT MATCH, SEND 10 CONSECUTIVE DECIMAL 17'S (╚┼╪ $11) TO TELL THE ┬┬╙ TO RESEND THE BLOCK.
╔N EITHER CASE, GO BACK AND RECEIVE ANOTHER BLOCK OF DATA.
╬╧╫, IF YOU GET A TIME-OUT WHILE WAITING FOR A BLOCK, CLOSE YOUR FILE, THEN SEND AN '╙' (DECIMAL 83, ╚┼╪ $53). ╘HE ┬┬╙ WILL ALREADY BE WAITING FOR THIS SIGNAL (IT IS TO HOLD BACK THE ┬┬╙ FROM RETURNING TO '├OMMAND >' BEFORE YOU ARE READY TO RECEIVE IT). ╬OW RETURN TO TERMINAL MODE AND WAIT FOR THE ┬┬╙'S RESPONSE.
╧NE OF THOSE RESPONSES COULD BE JUST '├OMMAND >', MEANING YOU HAVE BEEN SUCCESSFULLY SENT THE PROGRAM. ╧N THE OTHER HAND, YOU MIGHT GET:
╧VER 5 TRIES FOR A SINGLE BLOCK!
├OMMAND >
╘HIS TELLS YOU THAT YOU TRIED 5 TIMES, UNSUCCESSFULLY TO RECEIVE A SINGLE BLOCK OF PROGRAM. ╙OMETHING MUST BE WRONG!
┼RROR ═ESSAGES
--------------
─ESPITE THE CHECKSUMS AND ╟OOD - ┬AD ╙IGNALS USED TO ENSURE TRANSMISSION QUALITY, THINGS CAN STILL GO WRONG, SO A NUMBER OF ERROR MESSAGES HAVE BEEN PUT IN THE SYSTEM TO TELL YOU WHAT WENT WRONG.
┴ SIMPLE SYSTEM WAS TRIED PREVIOUSLY, BUT IT SUFFERED FROM ONE PROBLEM, IF THE ╒╙┼╥ WASN'T ╧╬╠╔╬┼ AT THE TIME THE MESSAGE WAS SENT, HE NEVER GOT TO SEE THE MESSAGE. ╬OW, AS WELL AS SENDING THE MESSAGE WHEN THE FUNCTION FINISHES, THAT MESSAGE IS ALSO SAVED IN A VARIABLE, WHICH CAN BE READ AT ANY TIME FROM '├OMMAND >' BY TYPING:
╙╘┴╘ <╥┼╘╒╥╬>
═ESSAGES ┴VAILABLE ARE:
╠╧┴─ (─OWNLOADING)
----
- ╧╦
- ╟/┬ ╙IGNAL ╠OST
- ╧VER 5 ╘RIES ╞OR A ╙INGLE ┬LOCK
- ╠OAD ┴BORTED
╙┴╓┼ (╒PLOADING)
----
- ─ONE: ╪╪ ┬LOCKS
- ╙AVE ┴BORTED
╪╪ EQUALS THE NUMBER OF BLOCKS OF CODING RECEIVED, THUS ALLOWING YOU TO DETERMINE IF THE ENTIRE PROGRAM WAS SENT.
├OMMAND (┬) > LOAD
╠╧┴─ - ╠OAD A ╨ROGRAM ╞ROM THE ┬┬╙
╘HE FOLLOWING FUNCTION IS CONNECTED WITH THE RECEPTION OF PROGRAMS FROM THE ┬┬╙. ╒NLESS YOU HAVE A TERMINAL PROGRAM CAPABLE OF SUPPORTING THE PROTOCOL USED BY THIS BOARD, THIS FUNCTION WILL NOT WORK.
┴LL OF THE DOWNLOAD SECTION OF THIS BOARD IS CONTAINED ON WHAT IS CALLED A PROGRAM LINK. ╫HEN THE '╨ROGRAM ╠INK' IS BEING LOADED, THE FOLLOWING MESSAGE WILL BE DISPLAYED:
╙TANDBY, LOADING ╒PLOAD/─OWNLOAD
PROGRAM LINK. ╘O RETURN TO ═┴╔╬ ┬┬╙
TYPE ┬┬╙ <╥┼╘╒╥╬>
╘O REMIND YOU THAT YOU ┴╥┼╬'╘ IN THE ═┴╔╬ ┬┬╙ THE COMMAND PROMPT WILL NOW LOOK LIKE THIS:
├OMMAND (╠) >
╘O ─╧╫╬╠╧┴─ A PROGRAM FROM THE ┬┬╙ TYPE ╠╧┴─ <╥┼╘╒╥╬>. ┘OU WILL BE ASKED:
╨ROGRAM ╬AME?
╘YPE IN THE FULL NAME OF THE PROGRAM. ╘HE ┬┬╙ WILL NOW SEARCH THE DIRECTORY FOR THE NAME GIVEN. ╔F IT IS NOT FOUND, YOU WILL BE INFORMED AND RETURNED TO THE '╨ROGRAM ╬AME?' PROMPT. ╔F IT IS FOUND, YOU WILL BE TOLD THE APPROXIMATE TRANSMISSION TIME:
┼STIMATED ╘RANSMISSION
╘IME = 14.2 ═INUTES
╫AITING ╞OR ╙TART ╙IGNAL
(OR '┴' FOR ┴BORT)
┘OU ARE NOW READY TO RECEIVE THE PROGRAM (SEE INSTRUCTIONS FOR YOUR TERMINAL PROGRAM TO PROCEED FROM HERE).
╔F YOU DECIDE THAT YOU DON'T WANT TO GO AHEAD WITH THE ╠╧┴─, SIMPLY PRESS THE '┴' KEY AND YOU WILL BE RETURNED TO THE '├OMMAND (╠) >' PROMPT.
╘HERE ARE THREE WAYS IN WHICH A ╠╧┴─ COULD END UP. ╫HEN THE LOAD IS COMPLETE, ONE OF THREE STATUS MESSAGES WILL BE SENT:
╧╦
╫HICH MEANS THE PROGRAM HAS BEEN RECEIVED PROPERLY.
╟/┬ ╙IGNAL ╠OST
╫HICH MEANS THAT YOUR TRANSMISSION OF THE '╟OOD - ┬AD' SIGNAL FOR THE CURRENT BLOCK WAS SOMEHOW LOST, TRANSMISSION HAS BEEN ABORTED.
╧VER 5 ╘RIES ╞OR A ╙INGLE ┬LOCK
╫HICH MEANS THAT THE BOARD TRIED FIVE TIMES UNSUCCESSFULLY TO SEND A BLOCK, TRANSMISSION HAS BEEN ABORTED.
├OMMAND (┬) > SAVE
╙┴╓┼ - ╙┴╓┼ A ╨ROGRAM TO THE ┬┬╙
╘HE FOLLOWING FUNCTION IS CONNECTED WITH THE RECEPTION OF PROGRAMS FROM THE ┬┬╙. ╒NLESS YOU HAVE A TERMINAL PROGRAM CAPABLE OF SUPPORTING THE PROTOCOL USED BY THIS BOARD, THIS FUNCTION WILL NOT WORK.
┴LL OF THE DOWNLOAD SECTION OF THIS BOARD IS CONTAINED ON WHAT IS CALLED A PROGRAM LINK. ╫HEN THE '╨ROGRAM ╠INK' IS BEING LOADED, THE FOLLOWING MESSAGE WILL BE DISPLAYED:
╙TANDBY, LOADING ╒PLOAD/─OWNLOAD
PROGRAM LINK. ╘O RETURN TO ═┴╔╬ ┬┬╙
TYPE ┬┬╙ <╥┼╘╒╥╬>
╘O REMIND YOU THAT YOU ┴╥┼╬'╘ IN THE ═┴╔╬ ┬┬╙ THE COMMAND PROMPT WILL NOW LOOK LIKE THIS:
├OMMAND (╠) >
╘O UPLOAD A PROGRAM TO THE ┬┬╙, TYPE ╙┴╓┼ <╥┼╘╒╥╬>. ┘OU WILL BE ASKED:
╨ROGRAM ╬AME?
╟IVE THE NAME BY WHICH YOU WOULD LIKE YOUR FILE STORED. ╘HE ┬┬╙ WILL NOW SEARCH THE DIRECTORY TO DETERMINE WHETHER THAT NAME HAS BEEN USED BEFORE OR NOT. ╔F IT HAS, YOU WILL BE TOLD SO AND RETURNED TO THE '╨ROGRAM ╬AME?' PROMPT. ╔F THE NAME HAS NOT BEEN USED, YOU WILL BE ASKED:
╙ECURITY ├ODE (OR <╥┼╘╒╥╬>
FOR ╟ENERAL ─ISTRIBUTION)?
┴S IT SAYS, IF YOU ENTER NOTHING, THE PROGRAM CAN BE DOWNLOADED BY ANYONE (WITH THE PROPER TERMINAL PROGRAM OF COURSE), WHILE IF YOU DO ENTER SOMETHING (UP TO 6 CHARACTERS), ONLY THOSE PERSONS KNOWING THIS CODE WILL BE ABLE TO ╠╧┴─ THE PROGRAM. ┘OU WILL NOW SEE:
─ELETION ├ODE?
╔F YOU WISH TO BE ABLE TO DELETE THE PROGRAM AT A FUTURE TIME, THIS CODE WILL BE NECESSARY. ┼NTER UP TO 6 CHARACTERS. ╔F NOTHING IS ENTERED, THE PROGRAM WILL ONLY BE DELETABLE BY THE ╙┘╙╧╨. ┘OU WILL NOW SEE:
╫AITING ╞OR ╙TART ╙IGNAL
(OR '┴' FOR ┴┬╧╥╘)
╙EE THE INSTRUCTIONS FOR YOUR TERMINAL PROGRAM TO PROCEED FROM HERE.
╧NCE THE ╙┴╓┼ IS FINISHED, THE NUMBER OF BLOCKS RECEIVED WILL BE SENT BACK TO YOU SO THAT YOU CAN DETERMINE WHETHER THE ENTIRE FILE WAS SENT OR NOT:
─ONE: 25 ┬LOCKS
╙╘┴╘ - ╞ILE ╘RANSFER ╙TATUS ═ESSAGE
╫HEN YOU ARE DOING ╠╧┴─S OR ╙┴╓┼S, A MESSAGE IS SENT AT THE END TO TELL YOU HOW THE TRANSFER WORKED. ╔F, FOR SOME REASON, YOU DIDN'T GET TO SEE THIS MESSAGE, OR YOU WOULD LIKE TO SEE IT AGAIN, SIMPLY TYPE ╙╘┴╘ <╥┼╘╒╥╬>.
┴LSO VIEWABLE WITH ╙╘┴╘ ARE:
╠╧┴─ ┴BORTED
╙┴╓┼ ┴BORTED
╫HICH ARE NOT DISPLAYED IF YOU CANCEL ╠╧┴─ OR ╙┴╓┼.
