╙ELECT THIS TO HAVE YOUR 128 SWITCH TO 64 MODE AND AUTOBOOT THE DESIRED PROGRAM
2. 128 BOOT.
╙ELECT THIS TO AUTOBOOT THE DESIRED 128 PROGRAM.
3. ╙AVE NEW VERSION.
╙ELECT THIS TO SAVE ANOTHER VERSION OF THIS PROGRAM TO YOUR DISK. ╒SE THIS WHENYOU'VE CHANGED THE BUILT IN MESSAGES OR ADDED YOUR OWN. ╘HE ROUTINE WILL CHECK
THE DISK FOR THE LATEST VERSION NUMBER, AND WILL AUTOMATICALLY POKE THE NEXT
HIGHER NUMBER INTO THE PROGRAM AND SAVE ITSELF.
4. ─IRECTORY.
─ISPLAYS THE CURRENT DISK'S DIRECTORY.
5. ╓ALIDATE.
╙ELECT THIS TO FREE UP UNUSED SECTORS ON A DISK. *** ╫┴╥╬╔╬╟!!!!! *** ─O NOT USETHIS ON A COMMERCIAL DISK UNLESS IT IS A BACKUP COPY.
6. ╙CAN.
╙ELECT THIS TO VIEW THE CONTENTS OF SECTORS ON A DISK.
╤. ╤UIT THE PROGRAM.
╔╬╞╧
╔F THE PROGRAM DECIDES THAT THE BOOT SECTOR ON A GIVEN DISK IS CURRENTLY IN USE,YOU WILL HAVE A CHOICE TO EITHER ABORT, OVERWRITE THE SECTOR (IT WILL BE
DISPLAYED ON THE SCREEN FOR YOU TO SEE IT), OR RELOCATE IT. ╔F YOU CHOOSE TO
RELOCATE IT, THE PROGRAM WILL SEARCH THE DISK FOR A FREE SECTOR, COPY THE BOOT
SECTOR TO IT, CHANGE THE SECTOR LINKS AND RE-ALLOCATE WHERE NECESSARY. ┘OU WILL
THEN BE ABLE TO PROCEED WITH CREATING THE NEW AUTOBOOT.*** ╫┴╥╬╔╬╟!! *** ─O NOT
TRY TO RELOCATE A SECTOR ON A COMMERCIAL DISK UNLESS IT IS A BACKUP! ─ATA ON
MOST COMMERCIAL DISKS IS STORED DIFFERENTLY THAN THE WAY ├OMMODORE ─╧╙ DOES IT,
AND YOU MAY LOSE DATA.
╬╧╘┼╙
╔F YOU WISH TO CHANGE OR CREATE YOUR OWN MESSAGES, SOME MINIMAL PROGRAMMING
SKILL IS NEEDED....┴LL YOU HAVE TO KNOW IS HOW TO EDIT A BASIC PROGRAM LINE.
╘HE LINES WILL BE LISTED AUTOMATICALLY WHEN YOU ANSWER 'NO' TO THE PROMPT '╒╙┼
╘╚╔╙ ═┼╙╙┴╟┼?'. ╘O CREATE A NEW MESSAGE, CURSOR OVER TO THE FIRST QUOTE MARK ON
THE LINE, PRESS AND RELEASE ┼╙├┴╨┼, THEN PRESS AND RELEASE '╤' TO ERASE THE RESTOF THE LINE. ╘HEN TYPE A QUOTE MARK AND START YOUR MESSAGE. ╘HE WHOLE MESSAGE
PLUS THE LINE NUMBER AND VARIABLE MUST FIT INTO ONE ├┬═128 PROGRAM LINE, WHICH
IS 4 SCREEN LINES LONG. ┴T THE END OF YOUR MESSAGE, ADD A COLOR CHARACTER THAT
MATCHES THE DESIRED SCREEN COLOR AND THEN THE END QUOTE MARK, PRESS ╥┼╘╒╥╬, AND
CURSOR DOWN TO WHERE IT SAYS '╥┼-┼─╔╘,├╧╬╘╔╬╒┼' AND PRESS ╥┼╘╒╥╬ ON THAT LINE.
╨RESS THE '+' KEY AT THE '╒╙┼ ╘╚╔╙ ═┼╙╙┴╟┼?' PROMPT TO CYCLE SCREEN COLORS. ═AKESURE THERE IS A '╥┼═' AT THE BEGINNING OF THE MESSAGES YOU ARE NOT USING, AND
THAT THERE IS NOT A '╥┼═' IN THE MESSAGE YOU WANT TO USE. ╔ SUGGEST THAT YOU
BRUSH UP ON ┬┴╙╔├ EDITING BY LOOKING THROUGH YOUR USERS MANUAL IF YOU ARE NOT
SURE HOW TO DO IT.
╔F YOU MAKE A MISTAKE AND CAN'T RECOVER, SIMPLY LOAD THE PROGRAM AGAIN AND STARTOVER. ╥EMEMBER YOU DON'T HAVE TO USE THIS FEATURE, YOU CAN JUST USE THE BUILT INMESSAGES IF YOU WISH, NO PROGRAMMING EXPERIENCE REQUIRED.
╙╨┼├╔┴╠ ├64 BOOT ╬╧╘┼╙
╫HEN USING THE OPTION, '128 TO 64 BOOT', THE MESSAGE LENGTH HAS TO BE SLIGHTLY
SHORTER. ─ETAILS ON THIS ARE IN THE PROGRAM. ┴LSO THE FILENAME OF THE BOOT
PROGRAM MUST BE INCLUDED SOMEWHERE IN THE MESSAGE. ╞OR EXAMPLE, THE MESSAGE
'╠╧┴─╔╬╟ ═┼╬╒' WILL BE ABLE TO BOOT A PROGRAM ENTITLED '═┼╬╒', OR '═┼╬', OR '═',OR '╠╧┴─', ETC. ═AKE SURE THERE ARE NO COLOR OR CURSOR CONTROL CHARACTERS
BETWEEN THE LETTERS IN THIS PART OF THE MESSAGE (THE PART USED TO DETERMINE THE
FILENAME). ╔N THE 128 BOOT, ANY FILENAME CAN BE USED, IRREGARDLESS OF THE
MESSAGE. ╔N BOTH 64 AND 128 BOOTS, USING AN ASTERISK FOR A FILENAME WILL BOOT
THE FIRST FILE ON THE DISK. ┴GAIN IF YOU DO THIS FOR THE 64 BOOT, THE ASTERISK
MUST ALSO BE INCLUDED IN THE MESSAGE SOMEWHERE. ┴N EXAMPLE OF THIS TYPE OF
MESSAGE WOULD BE: '┬╧╧╘╔╬╟.... ** ╟┼╧╙ **'. ┬Y THE WAY, YOU ├┴╬ AUTOBOOT A ╟┼╧╙BOOT DISK WITH THIS PROGRAM.
╘HESE SPECIAL INSTRUCTIONS, ALONG WITH SOME OTHERS, ALSO APPEAR IN THE PROGRAM.
╔F YOU FIND USE FOR THIS PROGRAM, PLEASE SEND $5.00 MINIMUM ╙╚┴╥┼╫┴╥┼ FEE TO:
