ftp.whtech.com/ftp.whtech.com.tar/ftp.whtech.com/club100/ref/pinout.dvi

Text File | 2006-10-19 | 2KB | 49 lines

 Appendix A from the DVI Manual
 Connector Pin Assignments

 System Bus Connector

 Pin No.  Symbol    Description
 1        VDD       +5V Power Supply from TRS-80 Model 100
 2        VDD       +5V Power Supply from TRS-80 Model 100
 3        GND       Logic Ground
 4        GND       Logic Ground
 5        AD1       Address Data Signal bit 1
 6        AD0       Address Data Signal bit 0
 7        AD3       Address Data Signal bit 3
 8        AD2       Address Data Signal bit 2
 9        AD5       Address Data Signal bit 5
 10       AD4       Address Data Signal bit 4
 11       AD7       Address Data Signal bit 7
 12       AD6       Address Data Signal bit 6
 13       A 9       Address Signal bit  9
 14       A 8       Address Signal bit  8
 15       A 11      Address Signal bit 11
 16       A 10      Address Signal bit 10
 17       A 13      Address Signal bit 13
 18       A 12      Address Signal bit 12
 19       A 15      Address Signal bit 15
 20       A 14      Address Signal bit 14
 21       GND       Logic Ground
 22       GND       Logic Ground
 23       WR        Write enable Signal
 24       RD        Read enable Signal
 25       S0        Status 0 Signal
 26       IO/M      I/O or Memory Signal
 27       S 1       Status 1 Signal
 28       ALE       Address Latch enable Signal
 29       Y0        I/O Controller enable Signal
 30       CLK       2.54 MHz Clock Signal
 31       RESET     TRS-*) Model 100 Reset Signal
 32       A         Memory or I/O Access enable Signal
 33       INTA      Interrupt acknowledge Signal
 34       INTR      Interrupt request Signal
 35       GND       Logic Ground
 36       GND       Logic Ground
 37       NC        No connection
 38       RAM RST   TRS-80 Model 100 RAM reset Signal
 39       NC        No connection
 40       NC        No connection

<EOF>