home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
ftp.whtech.com
/
ftp.whtech.com.tar
/
ftp.whtech.com
/
articles
/
limanews
/
8CM515.TXT
< prev
next >
Wrap
Text File
|
2006-10-19
|
7KB
|
134 lines
ORIGINALLY PUBLISHED IN LIMA NEWSLETTER OCTOBER 1989
^^^^^^^ SOME COMMENTS ABOUT 80 COLUMN MONITORS
^^^^^^^^AND IN PARTICULAR THE MAGNAVOX 8CM515.
^^^^^^^^^^^^^^^^^^by Charles Good
^^^^^^^^^^^^^^^^Lima Ohio User Group
In one of our exchange newsletters I noticed a
statement to the effect that VGA monitors should work with
the Geneve and AVPC. These monitors are described as having
unlimited colors and analog input, both characteristics
needed by the 9938 video chip of the Geneve and AVPC. I
talked to Tom Spillane, maker of the AVPC, and he stated
that VGA monitors DO NOT WORK WITH THE AVPC OR GENEVE. The
Sync speed of VGA monitors is too fast.
Probably the best single indicator of color monitor
resolution is "dot pitch" which refers to how close the red,
green, and blue color dots are physically placed on the
monitor screen. The smaller the dot pitch the better the
resolution. There is a specific definition of "dot pitch",
but there is apparently no specific definition of "pixels of
resolution". I have seen identical resolution claims made
for monitors of different dot pitches. I recently purchased
the Magnavox 8CM515 professional color monitor for use with
my AVPC equipped 99/4A system. This monitor is apparently
identical to the Commodore 1084 and has a dot pitch of 0.42.
Tony McGovern, in the doc file that accompanies the
Funnelweb 80 column editor, describes th Commodore 1084S as
"only just good enough for 80 column work." I agree with
this statement, but I need to add that this 0.42 dot
pitch IS in fact adequate, in my opinion, for 80 column
work. I believe the 8CM515 is probably the color monitor of
choice for AVPC an Geneve users. I have looked at a 0.5 dot
pitch Radio Shack CM5 monitor. This is the monitor you see
on prominant display at most Radio Shack stores. I find its
display of 80 column text unacceptable. The fuzzy text
displayed by the CM5 would give me a headache if I had to
look at it for awhile. The only easy way to buy an AVPC or
Geneve compatible monotor with better than 0.42 dot pitch is
to purchase a multi sync monotor. These expensive monitors
all have good resolution (0.39 or better dot pitch) and can
be driven by a variety of frequencies, making them the most
versitile in terms of present and future graphics standards.
Tenex, in their Fall 89 catalog, lists one with a 0.31 dot
pitch for $516. Often they cost much more. It is too bad
that Magnavox discontinued production of their 8CM536
monitor with a 0.31 dot pitch and features otherwise
identical to the 8CM515 that I purchased.
I had been using a cheap monochrome green monitor with
noticably better resolution than my new 8CM515. However,
this better resolution is only apparent when you can adjust
the software you are using for the colors white (actually
green) on black. Changing the default colors on some TI
software is quite difficult and may require the use of a
Gram device. Non white on black color combinations
sometimes produced real problems with my green monitor. My
monochrome monitor had better resolution, but the 8CM515 is
sharp enough for text work and the color is great! I do not
want to go back to my green monitor.
The Magnavox 8CM515 is relatively inexpensive and has
alot of nice features. There are phono plug composite color
video and audio inputs so you can run a VCR or regular 99/4A
(using a monitor cable) through these inputs. In fact, you
can have a Geneve or AVPC system AND a VCR or unmodified
99/4A connected to the 8CM515 and operate both AT THE SAME
TIME. A front panel button allows you to switch between the
two displays. The 8CM515 has a "green switch" that imitates
that simulates the display of a green monitor and is useful
o text work. Back pannel controls allow you to stretch the
screen display vertically and horizontally and then center
this display. This means that you can get any video input
to exactly fill the monitor screen. If you want to use your
IBM clone with this monitor in CGA mode there is an
appropriate 8 pin DIN socket for TTL color input.
The Fall TENEX catalog lists the 8CM515 for $259, an
excellent price. I purchased my 8CM515 for $269 from
Midwest Microperipherals. This is the outfit with all those
full page ads in each issue of Compuer Shopper. I called
their 800 number to make sure that the monitor was in fact
in stock and then drove there the same day to pick it up.
Midwest is easy to reach from anyplace in Ohio that has
access to Interstate 75. The people there were very pleasant
and gave me quick service. Midwest has expanded greatly
over the years. They used to be in a little store front in
the tiny town of St. Paris. Then they moved to a concrete
block building in a nearby rural location out in th middle
of noplace. The concrete block building has now been
boarded up and Midwest is now in a new large modern
insulated steel building. Standing in their warehouse area
waiting for the customer service person to bring me my
monitor, I saw about 400 STAR NX1000 printers stacked neatly
on pallets. They are an authorized STAR service center. I
saw an assembly line for boxing equipment for shipping by
UPS to customers all over the country. What a place!
CGA, EGA, VGA, and the 9938 chip's COLOR DISPLAYS:
The following information comes from various sources
including the Fall 89 Tenex catalog and the Sept. 88 issue
of Micropendium.
The CGA (Color Graphics Adapter) standard resolution
is 320 x 200, that is, 320 pixels per line and 200 lines per
screen. The simultaneous display of 4 colors from a
palette of 64 is possible.
The EGA (Enhanced Graphics Adapter) will simultaneously
display 16 colors from a palette of 64 with a resolution of
640 x 350.
A VGA (Video Graphics Array, some call it the "Very
expensive Graphics Aarray") display can include
simultaneous display of 16 colors from a palette of 256000
with a resolution of 640 x 350. Alternatively, a VGA
display can simultaneously display 256 of these 256000
colors with 320 x 200 resolution. There are also, I
believe, several "super" VGA formats with higher
resolution. I have seen fantastic demo displays of VGA
graphics showing pictures of flowers and outdoor landscapes.
The subtle colors and lack of pixel graininess in these
demos made the monitor display resemble a Kodacolor
projction slide.
The Geneve computer, and 99/4A computers with an AVPC
have a display based on the 9938 video chip. This chip's
high resolution color displays include 16 colors from a
palette of 512 with 512 x 212 pixels resolution.
Alternatively, you can display all 256 of 256 possible
colors with a resolution of 256 x 212 pixels. These figures
suggest tht the 9938's color display is, in most respects,
better than EGA, and approaches what is possible with VGA.
.PL 1