home *** CD-ROM | disk | FTP | other *** search
/ ftp.whtech.com / ftp.whtech.com.tar / ftp.whtech.com / articles / archives / limanews.exe / TITOEMUL.TXT < prev    next >
Text File  |  2006-10-19  |  5KB  |  93 lines

  1.      ORIGINALLY PUBLISHED IN LIMA NEWSLETTER OCTOBER 1994
  2.  
  3.       CONVERTING TI DISKS SO THEY RUN ON A PC WITH 
  4.           ED SWARTZ'S "TI EMULATOR!" SOFTWARE  
  5.           by Charles Good 
  6.           Lima Ohio User Group 
  7.            
  8.           You need an IBM compatible 286 or higher PC computer with a cable
  9.      running from a COM port of the PC to the RS232 port of a 99/4A.
  10.      Such cables can be custom made by L.L. Conner Enterprise.  On the
  11.      99/4A you will run the transfer software you get in the mail after
  12.      sending in your registration fee for the TI Emulator!  On the PC you
  13.      will need the Windows "Terminal" accessory program that comes bundled
  14.      with Windows. 
  15.            
  16.           On the PC: 
  17.           Launch Windows. 
  18.           Open the "Accessories" window. 
  19.           Double click on the "Terminal" icon to start the terminal
  20.      program. 
  21.           Move the pointer to "Settings" at the top of the screen and click
  22.      to pull down a menu. 
  23.           Click on "Communications" from the "Settings" menu. 
  24.           From the "Communications" window select  COM1 or COM2 (whichever
  25.      com port your TI-to-PC cable is connected to) and Baud 1200.  You can
  26.      use Baud 9600, but I sometimes get errors at this speed. 
  27.           Click on Data bits 7, Parity None, and then click on OK. 
  28.           Move the pointer to "Transfers" at the top of the screen and
  29.      click to pull down the "Transfers" menu. 
  30.           Click on "Receive Text File" 
  31.           Select a file name and directory.  I use c:-windows-bootlog.txt
  32.      for my file name and directory. 
  33.           Click on OK. 
  34.           Answer YES to the "Do you want to replace existing file?" prompt. 
  35.            
  36.           On the 99/4A: 
  37.           Insert the EA module and the transfer software disk in DSK1. 
  38.           Put the disk of software you want to transfer to the PC in DSK2. 
  39.           Start the 99/4A, select 2- editor/assembler, and 5- Run Program
  40.      File. 
  41.           Use DSK1.TRANSA0 as the file name. 
  42.           The destination name is RS232.PA=N.BA=1200 
  43.           The source drive is 2. 
  44.           Press <enter> to transfer all the files on the disk and watch
  45.      the data scroll across the PC screen.  At 1200 baud, an almost full
  46.      DSSD TI disk takes about 20 minutes to transfer. 
  47.            
  48.           On the PC: 
  49.           When new data ceases appearing on the PC screen and when the TI
  50.      screen indicates transfer is completed click on STOP at bottom left of
  51.      PC screen. 
  52.           Close Terminal window. 
  53.           Exit Windows. 
  54.           CD to the directory where your TI Emulator! files reside.  I use
  55.      c:-994A as my directory name. 
  56.           Run ASC2BIN using the format ASC2BIN (destination subdirectory)
  57.      (source file).  For example, type "ASC2BIN c:-99/4A-games1
  58.      c:-windows-bootlog.txt" and press <enter> to convert all the files on
  59.      the disk you just transfered temporarily to bootlog.txt into a group
  60.      of files in the subdirectory "games1".  These files can new be run
  61.      usin TI Emulator! just as if they were TI files on a TI disk being run
  62.      with a 99/4A. 
  63.            
  64.            
  65.            
  66.            
  67.       TWO SPECIAL OFFERS TO MEMBERS OF THE LIMA USER GROUP  
  68.            
  69.           ONE:  Send me a 3.5 inch high density disk and a paid return
  70.      mailer.  I will return your disk with the sharware version of TI
  71.      EMULATOR! v5.1 installed in such a way that you can run the whole
  72.      thing directly off the disk without having to install it on your IBM
  73.      compatible computer's hard drive. 
  74.            
  75.           TWO:  If you have paid your sharware donation for Ed Swartz's TI
  76.      EMULATOR!, I will do the conversion process described above for you.
  77.      I can convert any TI disk, including disks of module gram files into
  78.      TI EMULATOR! format.  Send me your TI disks and a paid return mailer
  79.      and I will return your software on the same disks in 360K IBM
  80.      compatible TI EMULATOR! format.  Please note that not all TI software
  81.      and particularly not all TI modules will work with TI EMULATOR! I can
  82.      convert the software to TI EMULATOR! format, but this doesn't
  83.      guarantee that the converted software will actually work on your PC. 
  84.            
  85.           To prove that you paid your sharware donation, put the TI-to-PC
  86.      conversion program TRANSA0 on one of the TI disks.  Ed sends you this
  87.      program after you send him your shareware money.  Only registered TI
  88.      EMULATOR! users are supposed to have TRANSA0.  Send your disks and
  89.      paid return mailer to Charles Good at P.O. Box 647, Venedocia OH
  90.      45894. 
  91.           .PL 1 
  92.  
  93.