Usenet 1994 October

home *** CD-ROM | disk | FTP | other *** search

/ Usenet 1994 October / usenetsourcesnewsgroupsinfomagicoctober1994disk2.iso / misc / volume44 / unzip / part19 < prev next >

Wrap

Internet Message Format | 1994-09-19 | 70.4 KB

From: zip-bugs@wkuvx1.wku.edu (Info-ZIP group) Newsgroups: comp.sources.misc Subject: v44i084: unzip - Info-ZIP portable UnZip, version 5.12, Part19/20 Date: 18 Sep 1994 23:17:07 -0500 Organization: Sterling Software Sender: kent@sparky.sterling.com Approved: kent@sparky.sterling.com Message-ID: <35j3c3$qs6@sparky.sterling.com> X-Md4-Signature: 95464830f482147162e66d3e0da511d2 Submitted-by: zip-bugs@wkuvx1.wku.edu (Info-ZIP group) Posting-number: Volume 44, Issue 84 Archive-name: unzip/part19 Environment: UNIX, VMS, OS/2, MS-DOS, MACINTOSH, WIN-NT, LINUX, MINIX, COHERENT, AMIGA?, ATARI TOS, SGI, DEC, Cray, Convex, Amdahl, Sun Supersedes: unzip50: Volume 31, Issue 104-117 #! /bin/sh # This is a shell archive. Remove anything before this line, then feed it # into a shell via "sh file" or similar. To overwrite existing files, # type "sh file -c". # Contents: unzip-5.12/Contents unzip-5.12/ToDo # unzip-5.12/amiga/Contents unzip-5.12/amiga/amiga.h # unzip-5.12/amiga/crc_68.a unzip-5.12/amiga/z-stat.h # unzip-5.12/crypt.h unzip-5.12/funzip.doc # unzip-5.12/human68k/Contents unzip-5.12/human68k/Makefile.gcc # unzip-5.12/inflate.h unzip-5.12/mac/Contents # unzip-5.12/mac/macdir.h unzip-5.12/mac/macstat.h # unzip-5.12/msdos/Borland.fix unzip-5.12/msdos/Contents # unzip-5.12/msdos/makefile.bc unzip-5.12/msdos/makefile.msc # unzip-5.12/msdos/makefile.tc unzip-5.12/nt/Makefile # unzip-5.12/os2/Contents unzip-5.12/os2/zipgrep.cmd # unzip-5.12/unix/Contents unzip-5.12/vms/Contents # unzip-5.12/vms/clean.com unzip-5.12/vms/make.com # unzip-5.12/vms/unz_cld.cld unzip-5.12/zip.h # Wrapped by kent@sparky on Sat Sep 17 23:33:50 1994 PATH=/bin:/usr/bin:/usr/ucb:/usr/local/bin:/usr/lbin:$PATH ; export PATH echo If this archive is complete, you will see the following message: echo ' "shar: End of archive 19 (of 20)."' if test -f 'unzip-5.12/Contents' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'unzip-5.12/Contents'\" else echo shar: Extracting \"'unzip-5.12/Contents'\" $2790 characters$ sed "s/^X//" >'unzip-5.12/Contents' <<'END_OF_FILE' XContents of the UnZip 5.11 archive (the OS-specific subdirectories at the Xend contain their own Contents listings): X X Contents this file X README what UnZip is; general information X INSTALL how to compile and install UnZip and related utilities X Where where Zip/UnZip and encryption/decryption support can be found X History.511 new features and fixes in this release X ZipPorts Info-ZIP rules and guidelines on contributions to the cause X ToDo rough priority list of new features to be added in next release X BUGS known bugs, problems, and (possible) other features to be added X unzip.doc UnZip manual page, human-readable format X unzipsfx.doc UnZipSFX manual page, human-readable format X zipinfo.doc ZipInfo manual page, human-readable format X funzip.doc fUnZip manual page, human-readable format X CONTRIBS list of contributors to UnZip X COPYING copyrights and distribution policy X file_id.diz BBS-oriented file describing this archive X crypt.c dummy decryption routines (required*) X crypt.h dummy decryption header file (required*) X envargs.c code to read options from UNZIP environment var. (required) X explode.c code for exploding (required) X extract.c high-level extraction and decryption code (required) X file_io.c file manipulation and password code (required) X funzip.c filter unzip: extracts from stdin to stdout (pipes) X inflate.c code for inflating (required*) X inflate.h header file for inflating (required*) X match.c pattern-matching code for filename wildcards (required) X tables.h static lookup tables used in file_io.c and funzip.c (required*) X unreduce.c code for unreducing (required) X unshrink.c code for unshrinking (required) X unzip.c main UnZip driver code (required) X unzip.h main UnZip header file (required*) X version.h header with UnZip/UnZipSFX and ZipInfo version info (required) X zip.h dummy header for use with crypt.c (required*) X zipinfo.c UnZip listing routines, mainly for ZipInfo mode (required) X amiga/ support files for compiling under AmigaDOS X atari/ support files for compiling under Atari TOS X human68k/ support files for compiling under X68000/Human68K X mac/ support files for compiling under Macintosh OS X msdos/ support files for compiling under MS-DOS X nt/ support files for compiling under Windows NT X os2/ support files for compiling under OS/2 X tops20/ support files for compiling under TOPS-20 X unix/ support files for compiling under Unix X vms/ support files for compiling under VMS X XFiles marked "required*" are also needed to compile fUnZip. The normal Xunzip makefile targets now make both unzipsfx and funzip, except in a few Xcases; zipinfo is now incorporated into unzip (and invoked with unzip's X-Z option or by linking/renaming the executable to "zipinfo[.exe]" or X"ii[.exe]"). END_OF_FILE if test 2790 -ne `wc -c <'unzip-5.12/Contents'`; then echo shar: \"'unzip-5.12/Contents'\" unpacked with wrong size! fi # end of 'unzip-5.12/Contents' fi if test -f 'unzip-5.12/ToDo' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'unzip-5.12/ToDo'\" else echo shar: Extracting \"'unzip-5.12/ToDo'\" $2854 characters$ sed "s/^X//" >'unzip-5.12/ToDo' <<'END_OF_FILE' X================================ XFor UnZip 5.1/5.2/6.0/who knows: X================================ X XThe Big Plan [original 26 Jan 93]: X X o extract-to-dir capability X X DONE. X X o add wildcard zipfiles X X DONE. X X o incorporate zipinfo X X DONE. X X o clean up unzip.h X X DONE. X X o rewrite to use fwrite/no outbuf X X DONE. X X o replace EOL conversion code and make text/binary conversion automatic X X DONE. X X o add self-extracting unzip: deflated/stored only, suppress "extra bytes" X message, use argv[0] with path search, remove do_wild, etc. X X DONE. X X o move all strings to far memory under small-memory OS's, copying X back to local memory (slide[] buffer?) only when ready to print X X DONE, except for possible use of slide[]; os2.c; crypt.c; X inflate.c (incomplete trees messages); other decompression X routines?; etc. X X o add -C option for case-insensitivity of filename matching X X DONE. X Xfor 5.2: X o enable CHECK_EOF and RETURN_SEVERITY by default X X immediately! (start testing...) X X o incorporate Scott Maxwell OS/2 DLL mods X X next X X o add Unix extra field (GMT modification and status-change times) X X next X X o rename all nt/NT stuff to win32/WIN32 (works with Chicago, too...) X X soon X X o rewrite to use fread/fseek/no ReadByte/etc. [eventually: test X write(bytes) vs. fwrite(words), especially on Crays/Alphas] X X soon; ReadByte gone already. X X o incorporate new backfill version of inflate() X X next after fread/fseek/ReadByte X X o add multi-part zipfile handling X X next after that X X o check NEXTBYTE for EOF in crypt.c, funzip.c and explode.c, too X X soon X X o use (simple!) configure script in combination with Unix Makefile X X someday X X o add option to force completely non-interactive operation (no queries X for overwrite/rename, password, etc.); also allow some sort of non- X interactive password provision? (file? command-line? env. variable?) X X someday? X X o add ONLY_ZIPINFO compilation for 16-bit compiles X X later, possibly never X X o add testing of extra fields (if have CRC) X X later X X o change all output so goes through configurable routines (msg(), X warn(), err()) for simpler GUI interfacing X X later X X o rewrite to allow use as a filter X X way, way later... X X o add option to search zipfile contents for a string and print the X results? ("zipgrep" option--e.g., unzip -g or unzip -S) (easy for X fixed strings, hard for wildcards/true regex's) X X way, way later, if at all... X X o add -y "display symlinks" option to zipinfo? various sorting options? X (-St date/time, -Sn name)? X X who knows X X o add "in-depth" option to zipinfo? (check local headers against X central, etc.)--make it a better debugging tool (or just create X zipfix) X X who knows X X o ports underway: Acorn/RISCos, AOS/VS, ... X X X- allow multiple dir creation with -d option? (Bob Maynard) X END_OF_FILE if test 2854 -ne `wc -c <'unzip-5.12/ToDo'`; then echo shar: \"'unzip-5.12/ToDo'\" unpacked with wrong size! fi # end of 'unzip-5.12/ToDo' fi if test -f 'unzip-5.12/amiga/Contents' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'unzip-5.12/amiga/Contents'\" else echo shar: Extracting \"'unzip-5.12/amiga/Contents'\" $2025 characters$ sed "s/^X//" >'unzip-5.12/amiga/Contents' <<'END_OF_FILE' XContents of the "amiga" sub-archive for UnZip 5.11 and later: X X Contents this file X amiga.c Amiga-specific file I/O routines X amiga.h Amiga-specific header file X filedate.c SetFileDate() clone for OS 1.3, based on Paul Wells' utime() X X SMakeFile SAS/C makefile for UnZip and fUnZip X X makefile.azt Aztec C makefile for UnZip and fUnZip X stat.c stat() emulation for Aztec X z-stat.h "real" stat.h header file for Aztec X flate.a assembler version of inflate_codes() (define ASM_INFLATECODES) X crc_68.a assembler version of crc_32_tab loop (define ASM_CRC, REGARGS) X XNotes: X X Both the routines, flate.a and crc_68.a, require arg passing via registers. X X To include flate.a, unzip must be built using 16-bit integers. X (currently not possible with SAS/C) X X The DICE makefile has been removed since no one is supporting that X compiler anymore. X X It was discovered on release of UnZip 5.1 that the latest SAS compiler X revision (6.50 or 6.51) changed the timezone handling. The result is X that UnZip can extract files with the wrong times, usually off by an X offset of a few hours which is a function of the how the TZ environment X variable is set. Now the TZ variable needs to be set according to the X timezone you are in, because the tzname() function operates correctly X now (it didn't used to). If you do not set TZ to your current timezone, X files will be restored with times corrsponding to CST6, which is US/Central X time, the SAS/C default. On the Amiga, the TZ variable cannot utilize X the daylight savings time extentions, so don't use them. For example, X specify "EST5" instead of "EST5EDT". The latter form will confuse the X SAS/C libraries. To set the TZ environment variable, place the following X line in your startup sequence: X X setenv TZ XXXN X X where XXX is the 3-character timezone notation X N is the offset from Greenwich mean time X X example: X X setenv TZ PST8 ; for California time END_OF_FILE if test 2025 -ne `wc -c <'unzip-5.12/amiga/Contents'`; then echo shar: \"'unzip-5.12/amiga/Contents'\" unpacked with wrong size! fi # end of 'unzip-5.12/amiga/Contents' fi if test -f 'unzip-5.12/amiga/amiga.h' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'unzip-5.12/amiga/amiga.h'\" else echo shar: Extracting \"'unzip-5.12/amiga/amiga.h'\" $1126 characters$ sed "s/^X//" >'unzip-5.12/amiga/amiga.h' <<'END_OF_FILE' X/* amiga.h X * X * Globular definitions that affect all of AmigaDom. X * X * Originally included in unzip.h, extracted for simplicity and eeze of X * maintenance by John Bush. X * X * THIS FILE IS #INCLUDE'd by unzip.h X * X */ X X#include <time.h> X X X#ifdef AZTEC_C /* Manx Aztec C, 5.0 or newer only */ X# include <clib/dos_protos.h> X# include <pragmas/dos_lib.h> X# define MODERN X# define O_BINARY 0 X# include "amiga/z-stat.h" X# define dirent direct X# ifdef ASM_CRC X# pragma regcall(CalcCRC(a0,d0,a1,d1)) X# endif X#endif /* AZTEC_C */ X X X#if defined(LATTICE) || defined(__SASC) || defined(__SASC_60) X# include <sys/types.h> X# include <sys/stat.h> X# include <sys/dir.h> X# include <dos.h> X# include <proto/dos.h> /* needed? */ X# if ( (!defined(O_BINARY)) && defined(O_RAW)) X# define O_BINARY O_RAW X# endif X# ifdef ASM_CRC X /* PUT SOMETHING HERE TO PASS ARGS IN REGISTERS TO CalcCRC() */ X# endif X#endif /* LATTICE */ X X/* Funkshine Prough Toe Taipes */ X Xint cmptime (struct tm *, struct tm *); Xtime_t invlocal (struct tm *); XLONG FileDate (char *, time_t[]); X X#define dup /* needed? */ END_OF_FILE if test 1126 -ne `wc -c <'unzip-5.12/amiga/amiga.h'`; then echo shar: \"'unzip-5.12/amiga/amiga.h'\" unpacked with wrong size! fi # end of 'unzip-5.12/amiga/amiga.h' fi if test -f 'unzip-5.12/amiga/crc_68.a' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'unzip-5.12/amiga/crc_68.a'\" else echo shar: Extracting \"'unzip-5.12/amiga/crc_68.a'\" $1758 characters$ sed "s/^X//" >'unzip-5.12/amiga/crc_68.a' <<'END_OF_FILE' X; Not copyrighted by Paul Kienitz, 18 Jun 94. X; X; Return an updated 32 bit CRC value, given the old value and a block of data. X; This substitutes for the following lines at the top of flush() in file_io.c X; in UnZip, or a similar loop in updcrc() in util.c in Zip: X; X; register ulg crcval = crc32val; X; register ulg n = size; X; register uch *p=rawbuf; X; while (n--) X; crcval = crc_32_tab[((uch)crcval ^ (*p++)) & 0xff] ^ (crcval >> 8); X; crc32val = crcval; X; X; Those lines are replace with this call: X; X; crc32val = CalcCRC(crc_32_tab, crc32val, rawbuf, size); X; X; We have here the CalcCRC() code for Amiga. Define REGARGS if you can cause X; your compiler to put the four args in the registers A0, D0, A1, D1. I'm not X; sure, but I think you should define ATSIGN when using the SAS/C assembler. X; I wrote this because I found that, at least with the Aztec compiler, this loop X; was occupying about a quarter of the CPU time with UnZip -t commands. X X xdef _CalcCRC X Xtemp equr d2 X Xcrc_table equr a0 array of unsigned long Xcrcval equr d0 unsigned long initial value Xrawbuf equr a1 array of unsigned char Xrawbufsize equr d1 unsigned long (count of bytes in rawbuf) X X X IFD REGARGS X IFD ATSIGN X xdef @CalcCRC X@CalcCRC: X ELSE X_CalcCRC: ; args already in registers as named above X ENDC X ELSE ; !REGARGS X_CalcCRC: X move.l 4(sp),crc_table X move.l 8(sp),crcval X move.l 12(sp),rawbuf X move.l 16(sp),rawbufsize X ENDC X X move.l temp,-(sp) Xloop: X subq.l #1,rawbufsize X blt.s done ; we treat it as signed X moveq #0,temp X move.b (rawbuf)+,temp X eor.b crcval,temp X lsl.w #2,temp X move.l 0(crc_table,temp.w),temp X lsr.l #8,crcval X eor.l temp,crcval X bra.s loop Xdone: X;;; move.l crcval,d0 ; crcval already is d0 X move.l (sp)+,temp X rts END_OF_FILE if test 1758 -ne `wc -c <'unzip-5.12/amiga/crc_68.a'`; then echo shar: \"'unzip-5.12/amiga/crc_68.a'\" unpacked with wrong size! fi # end of 'unzip-5.12/amiga/crc_68.a' fi if test -f 'unzip-5.12/amiga/z-stat.h' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'unzip-5.12/amiga/z-stat.h'\" else echo shar: Extracting \"'unzip-5.12/amiga/z-stat.h'\" $2562 characters$ sed "s/^X//" >'unzip-5.12/amiga/z-stat.h' <<'END_OF_FILE' X#ifndef __Z_STAT_H X#define __Z_STAT_H X#define __STAT_H X X/* Since older versions of the Lattice C compiler for Amiga, and all current */ X/* versions of the Manx Aztec C compiler for Amiga, either provide no stat() */ X/* function or provide one inadequate for unzip (Aztec's has no st_mode */ X/* field), we provide our own stat() function in stat.c by Paul Wells, and */ X/* this fake stat.h file by Paul Kienitz. Paul Wells originally used the */ X/* Lattice stat.h but that does not work for Aztec and is not distributable */ X/* with this package, so I made a separate one. This has to be pulled into */ X/* unzip.h when compiling an Amiga version, as "amiga/z-stat.h". */ X X/* We also provide here a "struct direct" for use with opendir() & readdir() */ X/* functions included in amiga/stat.c. If you use amiga/stat.c, this must */ X/* be included wherever you use either readdir() or stat(). */ X X/* This include file should ONLY be loaded if AZTEC_C is defined, and X * you are using the substitute version of stat() from amiga/stat.c. X * Bit definitions are based on those in headers for SAS/C v6.0 X */ X X#include <time.h> X Xstruct stat { X unsigned short st_mode; X time_t st_ctime, st_atime, st_mtime; X long st_size; X long st_ino; X long st_blocks; X short st_attr, st_dev, st_nlink, st_uid, st_gid, st_rdev; X}; X X#define S_IFDIR (1<<11) X#define S_IFREG (1<<10) X X#if 0 X /* these values here are totally random: */ X# define S_IFLNK (1<<14) X# define S_IFSOCK (1<<13) X# define S_IFCHR (1<<8) X# define S_IFIFO (1<<7) X# define S_IFMT (S_IFDIR|S_IFREG|S_IFCHR|S_IFLNK) X#else X# define S_IFMT (S_IFDIR|S_IFREG) X#endif X X#define S_IHIDDEN (1<<7) X#define S_ISCRIPT (1<<6) X#define S_IPURE (1<<5) X#define S_IARCHIVE (1<<4) X#define S_IREAD (1<<3) X#define S_IWRITE (1<<2) X#define S_IEXECUTE (1<<1) X#define S_IDELETE (1<<0) X Xint stat(char *name, struct stat *buf); X X X#include <libraries/dos.h> X Xtypedef struct direct { X struct direct *d_cleanuplink, X **d_cleanupparent; X BPTR d_parentlock; X struct FileInfoBlock d_fib; X} DIR; X#define d_name d_fib.fib_FileName X Xextern unsigned short disk_not_mounted; /* flag set by opendir() */ X XDIR *opendir(char *); Xvoid closedir(DIR *); Xvoid close_leftover_open_dirs(void); /* call this if aborted in mid-run */ XDIR *readdir(DIR *); X Xint rmdir(char *); X X# ifdef AZTEC_C Xvoid tzset(void); Xint chmod(char *filename, int bits); X# endif X X#endif /* __Z_STAT_H */ END_OF_FILE if test 2562 -ne `wc -c <'unzip-5.12/amiga/z-stat.h'`; then echo shar: \"'unzip-5.12/amiga/z-stat.h'\" unpacked with wrong size! fi # end of 'unzip-5.12/amiga/z-stat.h' fi if test -f 'unzip-5.12/crypt.h' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'unzip-5.12/crypt.h'\" else echo shar: Extracting \"'unzip-5.12/crypt.h'\" $708 characters$ sed "s/^X//" >'unzip-5.12/crypt.h' <<'END_OF_FILE' X/* X crypt.h (dummy version) by Info-ZIP. Last revised: 18 Apr 94 X X This is a non-functional version of Info-ZIP's crypt.h encryption/ X decryption header file for Zip, ZipCloak, UnZip and fUnZip. This X file is not copyrighted and may be distributed without restriction. X See the "Where" file for sites from which to obtain the full crypt X sources (zcrypt21.zip or later). X */ X X#ifndef __crypt_h /* don't include more than once */ X#define __crypt_h X X#ifdef CRYPT X# undef CRYPT /* dummy version */ X#endif X X#define RAND_HEAD_LEN 12 /* needed to compile funzip */ X X#define zencode X#define zdecode X X#define zfwrite fwrite X X#define echoff(f) X#define echon() X X#endif /* !__crypt_h */ END_OF_FILE if test 708 -ne `wc -c <'unzip-5.12/crypt.h'`; then echo shar: \"'unzip-5.12/crypt.h'\" unpacked with wrong size! fi # end of 'unzip-5.12/crypt.h' fi if test -f 'unzip-5.12/funzip.doc' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'unzip-5.12/funzip.doc'\" else echo shar: Extracting \"'unzip-5.12/funzip.doc'\" $3592 characters$ sed "s/^X//" >'unzip-5.12/funzip.doc' <<'END_OF_FILE' X XFUNZIP(1) USER COMMANDS FUNZIP(1) X XNAME X funzip - filter for extracting from a ZIP archive in a pipe X XSYNOPSIS X [...] | funzip [-password] | [...] X X funzip [-password] input.zip | [...] X XARGUMENTS X [-password] X Optional password to be used if ZIP archive is X encrypted. Decryption may not be supported at some X sites. See DESCRIPTION for more details. X XDESCRIPTION X funzip acts as a filter; that is, it assumes that a ZIP X archive is being piped into standard input, and it extracts X the first member from the archive to stdout. If there is an X argument, then the input comes from the specified file X instead of from stdin. A password for encrypted zip files X can be specified on the command line (preceding the file X name, if any) by prefixing the password with a dash. Note X that this constitutes a security risk on many systems; X currently running processes are often visible via simple X commands (e.g., ps(1) under Unix), and command-line his- X tories can be read. If the first entry of the zip file is X encrypted and no password is specified on the command line, X then the user is prompted for a password and the password is X not echoed on the console. X X Given the limitation on single-member extraction, funzip is X most useful in conjunction with a secondary archiver program X such as tar(1). The following section includes an example X illustrating this usage in the case of disk backups to tape. X XEXAMPLES X To use funzip to extract the first member file of the X archive test.zip and to pipe it into more(1): X X funzip test.zip | more X X To use funzip to test the first member file of test.zip (any X errors will be reported on standard error): X X funzip test.zip > /dev/null X X To use zip and funzip in place of compress(1) and zcat(1) X (or gzip(1L) and gzcat(1L)) for tape backups: X X tar cf - . | zip -7 | dd of=/dev/nrst0 obs=8k X dd if=/dev/nrst0 ibs=8k | funzip | tar xf - X XInfo-ZIP Last change: 28 Aug 94 (v3.83) 1 X XFUNZIP(1) USER COMMANDS FUNZIP(1) X X (where, for example, nrst0 is a SCSI tape drive). X XBUGS X When piping an encrypted file into more and allowing funzip X to prompt for password, the terminal may sometimes be reset X to a non-echo mode. This is apparently due to a race condi- X tion between the two programs; funzip changes the terminal X mode to non-echo before more reads its state, and more then X ``restores'' the terminal to this mode before exiting. To X recover, run funzip on the same file but redirect to X /dev/null rather than piping into more; after prompting X again for the password, funzip will reset the terminal prop- X erly. X X There is presently no way to extract any member but the X first from a ZIP archive. This would be useful in the case X where a ZIP archive is included within another archive. In X the case where the first member is a directory, funzip sim- X ply creates the directory and exits. X X The functionality of funzip should be incorporated into X unzip itself (future release). X XSEE ALSO X gzip(1L), unzip(1L), unzipsfx(1L), zip(1L), zipcloak(1L), X zipinfo(1L), zipnote(1L), zipsplit(1L) X XAUTHOR X Mark Adler (Info-ZIP) X XInfo-ZIP Last change: 28 Aug 94 (v3.83) 2 X END_OF_FILE if test 3592 -ne `wc -c <'unzip-5.12/funzip.doc'`; then echo shar: \"'unzip-5.12/funzip.doc'\" unpacked with wrong size! fi # end of 'unzip-5.12/funzip.doc' fi if test -f 'unzip-5.12/human68k/Contents' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'unzip-5.12/human68k/Contents'\" else echo shar: Extracting \"'unzip-5.12/human68k/Contents'\" $411 characters$ sed "s/^X//" >'unzip-5.12/human68k/Contents' <<'END_OF_FILE' XContents of the "human68k" sub-archive for UnZip 5.1 and later: X X Contents this file X Makefile.gcc (shorter) makefile for GNU C on X68000 X human68k.c Human68K-specific routines for UnZip X options.s TwentyOne option checker (assembler routines) for Human68K X XNote that options.s contains high-order ASCII characters; it must be Xtreated as a binary file when e-mailing or posting via Usenet. END_OF_FILE if test 411 -ne `wc -c <'unzip-5.12/human68k/Contents'`; then echo shar: \"'unzip-5.12/human68k/Contents'\" unpacked with wrong size! fi # end of 'unzip-5.12/human68k/Contents' fi if test -f 'unzip-5.12/human68k/Makefile.gcc' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'unzip-5.12/human68k/Makefile.gcc'\" else echo shar: Extracting \"'unzip-5.12/human68k/Makefile.gcc'\" $2235 characters$ sed "s/^X//" >'unzip-5.12/human68k/Makefile.gcc' <<'END_OF_FILE' X# Makefile for UnZip 5.11 and later: Human68K with gcc NIIMI Satoshi X# X# The original Makefile maybe works fine, but X68000 is too slow X# to process it. So I split out needed part. X# X# Last revised: 10 Jul 94 X XVPATH = HUMAN68K X XCC = gcc XCFLAGS = -Wall -O -I. -fomit-frame-pointer -fstrength-reduce XLDFLAGS = -s X XLIBS = -lsignal -ldos -lmb X X# UnZipSFX flags XXC = -DSFX X X# fUnZip flags XFC = -DFUNZIP X X# object files XOBJS = unzip.o crypt.o envargs.o explode.o extract.o file_io.o inflate.o \ X match.o unreduce.o unshrink.o zipinfo.o human68k.o options.o XOBJX = unzipsfx.o crypt.o extract_.o file_io.o inflate.o match.o human68_.o XOBJF = funzip.o crypt_.o inflate_.o X XUNZIPS = unzip.x unzipsfx.x funzip.x X X.c.o: X $(CC) $(CFLAGS) -I. -c $< -o $@ X X# for debugging X.c.s: X $(CC) $(CFLAGS) -c $< -o $@ X Xall: unzips Xunzips: $(UNZIPS) Xdocs: $(DOCS) Xunzipsman: unzips docs Xunzipsdocs: unzips docs X Xclean: X rm -f $(OBJS) $(OBJF) $(OBJX) $(UNZIPS) X Xunzip.x: $(OBJS) X $(CC) $(LDFLAGS) -o $@ $(OBJS) $(LIBS) X Xunzipsfx.x: $(OBJX) X $(CC) $(LDFLAGS) -o $@ $(OBJX) $(LIBS) X Xfunzip.x: $(OBJF) X $(CC) $(LDFLAGS) -o $@ $(OBJF) $(LIBS) X Xcrypt.o: crypt.c unzip.h zip.h crypt.h Xenvargs.o: envargs.c unzip.h Xexplode.o: explode.c unzip.h Xextract.o: extract.c unzip.h crypt.h Xfile_io.o: file_io.c unzip.h crypt.h tables.h Xfunzip.o: funzip.c unzip.h crypt.h tables.h Xinflate.o: inflate.c inflate.h unzip.h Xmatch.o: match.c unzip.h Xunreduce.o: unreduce.c unzip.h Xunshrink.o: unshrink.c unzip.h Xunzip.o: unzip.c unzip.h crypt.h version.h Xzipinfo.o: zipinfo.c unzip.h X Xcrypt_.o: crypt.c unzip.h zip.h crypt.h # used by funzip X $(CC) $(CFLAGS) $(FC) -c $< -o $@ X Xextract_.o: extract.c unzip.h crypt.h # used by unzipsfx X $(CC) $(CFLAGS) $(XC) -c $< -o $@ X Xhuman68k.o: human68k/human68k.c unzip.h X $(CC) $(CFLAGS) -I. -c human68k/human68k.c -o $@ X Xhuman68_.o: human68k/human68k.c unzip.h # used by unzipsfx X $(CC) $(CFLAGS) $(XC) -I. -c human68k/human68k.c -o $@ X Xinflate_.o: inflate.c inflate.h unzip.h crypt.h # used by funzip X $(CC) $(CFLAGS) $(FC) -c $< -o $@ X Xunzipsfx.o: unzip.c unzip.h crypt.h version.h # used by unzipsfx X $(CC) $(CFLAGS) $(XC) -c $< -o $@ X Xdiff: X -(cd ..; diff -cNr unz51f unz51f-x68k -x GNUmakefile -x "*.[ox]" > unzip68k.dif) END_OF_FILE if test 2235 -ne `wc -c <'unzip-5.12/human68k/Makefile.gcc'`; then echo shar: \"'unzip-5.12/human68k/Makefile.gcc'\" unpacked with wrong size! fi # end of 'unzip-5.12/human68k/Makefile.gcc' fi if test -f 'unzip-5.12/inflate.h' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'unzip-5.12/inflate.h'\" else echo shar: Extracting \"'unzip-5.12/inflate.h'\" $887 characters$ sed "s/^X//" >'unzip-5.12/inflate.h' <<'END_OF_FILE' X/* inflate.h for UnZip -- put in the public domain by Mark Adler X version c14e, 29 September 1993 */ X X X/* You can do whatever you like with this source file, though I would X prefer that if you modify it and redistribute it that you include X comments to that effect with your name and the date. Thank you. X X History: X vers date who what X ---- --------- -------------- ------------------------------------ X c14 12 Mar 93 M. Adler made inflate.c standalone with the X introduction of inflate.h. X c14d 28 Aug 93 G. Roelofs replaced flush/FlushOutput with new version X c14e 29 Sep 93 G. Roelofs moved everything into unzip.h; added crypt.h X */ X X#include "unzip.h" /* provides slide[], typedefs and macros */ X#ifdef FUNZIP X# include "crypt.h" /* provides NEXTBYTE macro for crypt version of funzip */ X#endif END_OF_FILE if test 887 -ne `wc -c <'unzip-5.12/inflate.h'`; then echo shar: \"'unzip-5.12/inflate.h'\" unpacked with wrong size! fi # end of 'unzip-5.12/inflate.h' fi if test -f 'unzip-5.12/mac/Contents' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'unzip-5.12/mac/Contents'\" else echo shar: Extracting \"'unzip-5.12/mac/Contents'\" $1060 characters$ sed "s/^X//" >'unzip-5.12/mac/Contents' <<'END_OF_FILE' XContents of the "mac" sub-archive for UnZip 5.1 and later: X X Contents this file X mac.c Mac-specific filesystem code X macdir.c Macintosh Unix-style directory emulation X macdir.h header file for directory emulation X macscreen.c Macintosh window handling routines X macstat.c Macintosh stat() emulation X macstat.h header file for stat() emulation X macunzip.c Macintosh standalone version main program X rsrc.hqx resource file for Macintosh unzip (BinHex) X thinkc.hqx Think C project file (BinHex) X XThe resource file and the Think C project file are in BinHex form because Xthey contain Macintosh resource forks (only) and as such can not be simply Xstored a normal file on a non-Macintosh system. BinHex form is the Xtraditional way for transferring such files via non-Macintosh systems. It's Xalso the safest since it uses only printable characters. Both of the ".hqx" Xfiles must be converted with BinHex 4.0 (or equivalent) on a Macintosh Xsystem prior to attempted use. END_OF_FILE if test 1060 -ne `wc -c <'unzip-5.12/mac/Contents'`; then echo shar: \"'unzip-5.12/mac/Contents'\" unpacked with wrong size! fi # end of 'unzip-5.12/mac/Contents' fi if test -f 'unzip-5.12/mac/macdir.h' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'unzip-5.12/mac/macdir.h'\" else echo shar: Extracting \"'unzip-5.12/mac/macdir.h'\" $780 characters$ sed "s/^X//" >'unzip-5.12/mac/macdir.h' <<'END_OF_FILE' X/***************************************************************** X * X * dirent.h X * X *****************************************************************/ X X#ifndef __DIRENT_H X#define __DIRENT_H X X#include <errno.h> X X#ifndef ENOTDIR X#define ENOTDIR 20 X#endif X X#ifndef NAME_MAX X#define NAME_MAX 31 X#endif X Xstruct dirent { X unsigned long d_fileno; X short d_reclen; X short d_namlen; X char d_name[NAME_MAX + 1]; X}; X Xtypedef struct { X short ioFDirIndex; X short ioVRefNum; X long ioDrDirID; X short flags; X struct dirent currEntry; X} DIR; X X#define direct dirent X XDIR *opendir(char *); Xstruct dirent *readdir(DIR *); Xvoid rewinddir(DIR *); Xint closedir(DIR *); X#endif END_OF_FILE if test 780 -ne `wc -c <'unzip-5.12/mac/macdir.h'`; then echo shar: \"'unzip-5.12/mac/macdir.h'\" unpacked with wrong size! fi # end of 'unzip-5.12/mac/macdir.h' fi if test -f 'unzip-5.12/mac/macstat.h' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'unzip-5.12/mac/macstat.h'\" else echo shar: Extracting \"'unzip-5.12/mac/macstat.h'\" $974 characters$ sed "s/^X//" >'unzip-5.12/mac/macstat.h' <<'END_OF_FILE' X/***************************************************************** X * X * stat.h X * X *****************************************************************/ X X#include <time.h> Xextern int macstat(char *path, struct stat *buf, short nVRefNum, long lDirID ); Xtypedef long dev_t; Xtypedef long ino_t; Xtypedef long off_t; X Xstruct stat { X dev_t st_dev; X ino_t st_ino; X unsigned short st_mode; X short st_nlink; X short st_uid; X short st_gid; X dev_t st_rdev; X off_t st_size; X time_t st_atime, st_mtime, st_ctime; X long st_blksize; X long st_blocks; X}; X X#define S_IFMT 0xF000 X#define S_IFIFO 0x1000 X#define S_IFCHR 0x2000 X#define S_IFDIR 0x4000 X#define S_IFBLK 0x6000 X#define S_IFREG 0x8000 X#define S_IFLNK 0xA000 X#define S_IFSOCK 0xC000 X#define S_ISUID 0x800 X#define S_ISGID 0x400 X#define S_ISVTX 0x200 X#define S_IREAD 0x100 X#define S_IWRITE 0x80 X#define S_IEXEC 0x40 END_OF_FILE if test 974 -ne `wc -c <'unzip-5.12/mac/macstat.h'`; then echo shar: \"'unzip-5.12/mac/macstat.h'\" unpacked with wrong size! fi # end of 'unzip-5.12/mac/macstat.h' fi if test -f 'unzip-5.12/msdos/Borland.fix' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'unzip-5.12/msdos/Borland.fix'\" else echo shar: Extracting \"'unzip-5.12/msdos/Borland.fix'\" $3818 characters$ sed "s/^X//" >'unzip-5.12/msdos/Borland.fix' <<'END_OF_FILE' XNotes on patching Borland (binary) executables so they'll understand Unix- Xstyle, LF-delimited ASCII files (from Onno van der Linden, c/o Frank van Xder Linden, vdlinden@fwi.uva.nl). X X X1. The CPP used by TC 2.0 can't handle unix-style (LF-terminated) lines. X The CPP used by BC++ 2.0 can. X The CPP used by BC++ 3.0 can't handle #if statements with unix-style lines. X Fixes for both these problems below (GRR: offset, new byte, old byte). X X Comparing files \TC\CPP.EXE and \TC\CPP.OLD X 00004F25: 0D 0A X 00005E3D: 0D 0A X 00007916: 0D 0A X 000079D6: 0D 0A X 00007AC1: 0A 0D X 0000D8EE: EC F7 X 0000D8F1: F7 EC X 0000D9EE: EC F7 X 0000D9F1: F7 EC X 0000DC80: 0A 0D X 0000DC90: 0A 0D X X Comparing files \BORLANDC\BIN\CPP.EXE and \BORLANDC\BIN\CPP.OLD X 0001D150: 89 75 X 0001D151: 36 08 X 0001D152: 30 89 X 0001D153: 23 36 X 0001D154: 75 30 X 0001D155: 04 23 X 0001D288: 9A 89 X 0001D289: FF 36 X 0001D28A: FF 30 X 0001D28B: 00 23 X 0001D28C: 00 9A X 0001D28E: 0E FF X 0001D28F: 30 00 X 0001D290: 23 00 X 0001E5A7: 89 8D X X X2. The compilers (tcc 2.0 and bcc 3.0) are both one-pass compilers; i.e., X cpp.exe isn't used when compiling with tcc or bcc. The earlier statements X about both cpp's are the same for the builtin preprocesser in the compilers. X To fix the unix-style line stuff for the compilers, apply the fixes below. X I do have something called bpatch.c which reads in the output of fc /b and X changes the executable. If anyone is too lazy to write it himself, just X send out a mail. X X Comparing files TCC.EXE and TCC.OLD X 00005E06: BF 88 X 00005E07: 02 01 X 00005E0C: 88 BF X 00005E0D: 01 02 X 00006E7C: 0A 0D X 00011FF9: 0A 0D X 00012059: 0A 0D X 00017E6C: 0A 0D X 00018181: 0A 0D X 000181F6: 0A 0D X 00018AC1: 0A 0D X 00018B27: 0D 0A X 00018BBE: 0A 0D X 00018C12: 0A 0D X 00018C6A: 0A 0D X 0001948A: 0A 0D X 000194B7: 0D 0A X 00019507: 0A 0D X 0001C093: 0A 0D X 0001C495: 3C 89 X 0001C496: 0D 46 X 0001C497: 74 FC X 0001C498: DF 3D X 0001C499: FF 0D X 0001C49A: 0E 00 X 0001C49B: 34 75 X 0001C49C: 50 03 X 0001C49D: 3C E9 X 0001C49E: 0A F6 X 0001C49F: 75 FB X 0001C4A0: 03 FF X 0001C4A1: E9 0E X 0001C4A2: F2 34 X 0001C4A3: FB 50 X 0001C4D0: 0A 0D X 0001CFA7: 0A 0D X 0001CFBA: 0D 0A X 0001D007: 0A 0D X 0002A13C: 0A 0D X 0002A14C: 0A 0D X 0002A2B6: EC F7 X 0002A2B9: F7 EC X 0002A3B6: EC F7 X 0002A3B9: F7 EC X 0002A4B6: EC F7 X 0002A4B9: F7 EC X 0002BDC3: 20 21 X 0002BDC6: 21 20 X X Comparing files BCC.EXE and BCC.OLD X 0002B877: 89 75 X 0002B878: 36 08 X 0002B879: 5C 89 X 0002B87A: 5F 36 X 0002B87B: 75 5C X 0002B87C: 04 5F X 0002B9AF: 0E 89 X 0002B9B0: E8 36 X 0002B9B1: 56 5C X 0002B9B2: DC 5F X 0002B9B3: FF 90 X 0002B9B5: 5C E8 X 0002B9B6: 5F 51 X 0002B9B7: 90 DC X X Just an addition: the first one was for the cpp.exe's, the recent one is for X the compilers (bcc.exe, tcc.exe). The first one is a bit redundant because X cpp.exe is hardly ever used. See it as an attempt to make things complete. X X X3. For those of you who are using NDMAKE45 under MSDOS: X version 4.5 predefines the macro's MAKE and MFLAGS as readonly's. X So there was no way you could use $(MAKE) with ndmake45. X Here are the fc /b's that make things work: X X Comparing files MAKE45.EXE and MAKE45.OLD X 000019C0: 00 03 # MFLAG X 000019DC: 00 03 # MAKE X 00007BEA: 0A 7E # output of make -p X 00007BEB: 00 0A # X X Comparing files MAKE45L.EXE and MAKE45L.OLD X 0000277E: 00 03 # MFLAG X 0000279D: 00 03 # MAKE X 0000A6A8: 0A 7E # output of make -p X 0000A6A9: 00 0A X END_OF_FILE if test 3818 -ne `wc -c <'unzip-5.12/msdos/Borland.fix'`; then echo shar: \"'unzip-5.12/msdos/Borland.fix'\" unpacked with wrong size! fi # end of 'unzip-5.12/msdos/Borland.fix' fi if test -f 'unzip-5.12/msdos/Contents' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'unzip-5.12/msdos/Contents'\" else echo shar: Extracting \"'unzip-5.12/msdos/Contents'\" $2323 characters$ sed "s/^X//" >'unzip-5.12/msdos/Contents' <<'END_OF_FILE' XContents of the "msdos" sub-archive for UnZip 5.11 and later: X X Contents this file X README notes about quirks in MS-DOS executables and compilers X msdos.c OS-dependent UnZip routines for MS-DOS X makefile.bc makefile for Borland C++ and Turbo C++ X makefile.msc makefile for Microsoft C and make or nmake X makefile.tc makefile for Turbo C and make X Borland.fix patches to fix Borland executables for grokking Unix EOLs X XNotes: X X(1) As of UnZip 5.1, Borland project files are no longer included. They X were not as flexible as the makefiles, and the binary ones caused prob- X lems for both the comp.sources.misc moderator and the UnZip maintainer. X By way of compensation, what used to be called simply "makefile" has X been split into makefile.msc and makefile.tc (the latter for old Turbo C X compilers). X X(2) As of UnZip 5.11, makefile.gcc (for djgpp/GNU make) is no longer provided. X Instead use the gcc_dos target in the Unix makefile (unix/Makefile) after X copying it to the main UnZip directory. Note that, because of bugs in X the MS-DOS port of GNU make, the gcc_dos target does not make use of the X MAKE variable; therefore users of other makes (e.g., nmake) will have to X edit the target or rename their make utility to "make". X X(3) The Unix makefile also has an msc_dos target which can be used for MSC 6.0 X or later, but such use is discouraged and the target may disappear in the X future--use makefile.msc instead. X X(4) For DOS emx+gcc use the gccdos target in the OS/2 makefile.os2. This X target has only been tested in cross-compilation from OS/2 to MS-DOS, X but it should work under plain MS-DOS with a proper make utility. The X resulting executables require emx.exe to run (akin to djgpp's go32.exe). X X(5) The binary patches in Borland.fix are NOT required; they may be useful X if you regularly deal with Unix sources, but casual users should probably X make use of an external utility like Rahul Dhesi's FLIP to convert between X Unix and DOS/OS2 end-of-line characters. If you know how to patch binary X executables, you should be able to figure out how to use these patches. X Presumably they don't work for more recent versions of the executables X anyway; they'll probably be removed in the next version. END_OF_FILE if test 2323 -ne `wc -c <'unzip-5.12/msdos/Contents'`; then echo shar: \"'unzip-5.12/msdos/Contents'\" unpacked with wrong size! fi # end of 'unzip-5.12/msdos/Contents' fi if test -f 'unzip-5.12/msdos/makefile.bc' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'unzip-5.12/msdos/makefile.bc'\" else echo shar: Extracting \"'unzip-5.12/msdos/makefile.bc'\" $3487 characters$ sed "s/^X//" >'unzip-5.12/msdos/makefile.bc' <<'END_OF_FILE' X# Makefile for UnZip(SFX) and fUnZip for Borland C++ 2.x/3.0 and Turbo C++ 1.0 X# Version: 5.12 and later Alvin Koh, Jim Knoble, Christian Spieler, etc. X# X# Last revised: 11 Aug 94 X X X# for Borland C++ uncomment this and comment out the tcc line: XCC = bcc X X# for Turbo C++ uncomment this and comment out the bcc line: X#CC = tcc X X#TASM = tasm # not used X X#UNMODEL = s # small model for UnZip and ZipInfo, now that strings moved XUNMODEL = l # large model for UnZip (M. Lawler/BC 4.0: _text > 64K w/ "s") XFUMODEL = s # always use small model for fUnZip X X# GNU make doesn't like the return value from "rem" X#STRIP=rem XSTRIP=echo Ignore this line. X# If you don't have LZEXE or PKLITE, get one of them. Then define: X#STRIP=lzexe X# or X#STRIP=pklite X# This makes a big difference in .exe size (and possibly load time). X X X# Optional nonstandard preprocessor flags (as -DCHECK_EOF or -DDOS_WILD) X# should be added to the environment via "set LOCAL_UNZIP=-DFOO" or added X# to the declaration of LOC here: XLOC = $(LOCAL_UNZIP) X X X# compiler flags X XCFLAGS = -O -ff- -k- -P-.C -I. $(LOC) XUNFLAGS = -m$(UNMODEL) $(CFLAGS) XFUFLAGS = -m$(FUMODEL) $(CFLAGS) -K -d XLDFLAGS = -lxncd -l-P # for bcc X#LDFLAGS = -lxncd # for tcc X X# implicit rules X X.c.obj: X $(CC) -c $(UNFLAGS) {$< } X X# list macros X Xunzip_dependencies = \ X unzip.obj \ X crypt.obj \ X envargs.obj \ X explode.obj \ X extract.obj \ X file_io.obj \ X inflate.obj \ X match.obj \ X unreduce.obj \ X unshrink.obj \ X zipinfo.obj \ X msdos.obj X Xfunzip_dependencies = \ X funzip.obj \ X crypt_.obj \ X inflate_.obj X Xunzipsfx_dependencies = \ X unzip_.obj \ X crypt.obj \ X extract_.obj \ X file_io.obj \ X inflate.obj \ X match.obj \ X msdos_.obj X X# explicit rules X Xall: unzip.exe funzip.exe unzipsfx.exe X Xunzip.exe: $(unzip_dependencies) X $(CC) -m$(UNMODEL) $(LDFLAGS) -eunzip.exe @&&| Xunzip.obj Xcrypt.obj Xenvargs.obj Xexplode.obj Xextract.obj Xfile_io.obj Xinflate.obj Xmatch.obj Xunreduce.obj Xunshrink.obj Xzipinfo.obj Xmsdos.obj X| X $(STRIP) unzip.exe X Xfunzip.exe: $(funzip_dependencies) X $(CC) -m$(FUMODEL) $(LDFLAGS) -efunzip.exe @&&| Xfunzip.obj Xcrypt_.obj Xinflate_.obj X| X $(STRIP) funzip.exe X Xunzipsfx.exe: $(unzipsfx_dependencies) X $(CC) -m$(UNMODEL) $(LDFLAGS) -eunzipsfx.exe @&&| Xunzip_.obj Xcrypt.obj Xextract_.obj Xfile_io.obj Xinflate.obj Xmatch.obj Xmsdos_.obj X| X $(STRIP) unzipsfx.exe X X# individual file dependencies X Xcrypt.obj: crypt.c unzip.h zip.h crypt.h Xenvargs.obj: envargs.c unzip.h Xexplode.obj: explode.c unzip.h Xextract.obj: extract.c unzip.h crypt.h Xfile_io.obj: file_io.c unzip.h crypt.h tables.h Xinflate.obj: inflate.c inflate.h unzip.h Xmatch.obj: match.c unzip.h Xunreduce.obj: unreduce.c unzip.h Xunshrink.obj: unshrink.c unzip.h Xunzip.obj: unzip.c unzip.h crypt.h version.h Xzipinfo.obj: zipinfo.c unzip.h X Xmsdos.obj: msdos/msdos.c unzip.h X $(CC) -c $(UNFLAGS) msdos/msdos.c X Xfunzip.obj: funzip.c unzip.h crypt.h tables.h X $(CC) -c $(FUFLAGS) funzip.c X Xcrypt_.obj: crypt.c unzip.h zip.h crypt.h X $(CC) -c $(FUFLAGS) -DFUNZIP -ocrypt_.obj crypt.c X Xinflate_.obj: inflate.c inflate.h unzip.h crypt.h X $(CC) -c $(FUFLAGS) -DFUNZIP -oinflate_.obj inflate.c X Xunzip_.obj: unzip.c unzip.h crypt.h version.h X $(CC) -c $(UNFLAGS) -DSFX -ounzip_.obj unzip.c X Xextract_.obj: extract.c unzip.h crypt.h X $(CC) -c $(UNFLAGS) -DSFX -oextract_.obj extract.c X Xmsdos_.obj: msdos/msdos.c unzip.h X $(CC) -c $(UNFLAGS) -DSFX -omsdos_.obj msdos/msdos.c END_OF_FILE if test 3487 -ne `wc -c <'unzip-5.12/msdos/makefile.bc'`; then echo shar: \"'unzip-5.12/msdos/makefile.bc'\" unpacked with wrong size! fi # end of 'unzip-5.12/msdos/makefile.bc' fi if test -f 'unzip-5.12/msdos/makefile.msc' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'unzip-5.12/msdos/makefile.msc'\" else echo shar: Extracting \"'unzip-5.12/msdos/makefile.msc'\" $3972 characters$ sed "s/^X//" >'unzip-5.12/msdos/makefile.msc' <<'END_OF_FILE' X#------------------------------------------------------------------------------ X# Makefile for UnZip 5.11 and later Greg Roelofs and others X# Version: Microsoft C (5.x and later) 11 August 1994 X#------------------------------------------------------------------------------ X X# Users of MSC 6/7 and NMAKE can use the Unix Makefile (target msc_dos), X# if desired. This makefile works just fine, too, however. OS/2 users X# can cross-compile using os2/makefile.os2 (target mscdos). Note that X# there is possibly a bug in MSC 6 which screws up funzip (goes into X# infinite loop? --this has not been confirmed in over a year...). There X# is definitely a bug (internal compiler error) in MSC 6.00 while com- X# piling explode.c (fixed in 6.0a, 6.0ax, 6.0ax2, 7.*, 8.*). X X X# GNU make doesn't like the return value from "rem" X#STRIP=rem XSTRIP=echo Ignore this line. X# If you don't have LZEXE or PKLITE, get one of them. Then define: X#STRIP=lzexe X# or X#STRIP=pklite X# and remove /e from LDFLAGS. This makes a big difference in X# .exe size (and possibly load time). X X# Optional nonstandard preprocessor flags (as -DCHECK_EOF or -DDOS_WILD) X# should be added to the environment via "set LOCAL_UNZIP=-DFOO" or added X# to the declaration of LOC here: XLOC = $(LOCAL_UNZIP) X X# small model (should work now, but if problems, use L) XMODEL=S X XCC = cl # -Ox does not work for inflate.c X# add -G2(3,4) for 286 (386, 486) and/or -FPi87 for 80x87: XCFLAGS = -nologo -DMSC $(LOC) -Oait -Gs -I. X XLD = link XLDFLAGS = /nologo/noi/e/st:0x0c00 # remove /e if you have LZEXE or PKLITE XLDFLAGS2 = ,$*; X XOBJS1 = unzip.obj crypt.obj envargs.obj explode.obj extract.obj file_io.obj XOBJS2 = inflate.obj match.obj unreduce.obj unshrink.obj zipinfo.obj XOBJS3 = msdos.obj XOBJS = $(OBJS1) $(OBJS2) $(OBJS3) X XOBJX = unzip_.obj crypt.obj extract_.obj file_io.obj inflate.obj match.obj\ X msdos_.obj X XOBJF = funzip.obj crypt_.obj inflate_.obj X X Xdefault: unzip.exe funzip.exe unzipsfx.exe X X.c.obj: X $(CC) -c -A$(MODEL) $(CFLAGS) $*.c X Xcrypt.obj: crypt.c unzip.h crypt.h zip.h X Xcrypt_.obj: crypt.c unzip.h crypt.h zip.h X $(CC) -c -AS $(CFLAGS) -DFUNZIP -Focrypt_.obj crypt.c X Xenvargs.obj: envargs.c unzip.h X Xexplode.obj: explode.c unzip.h X Xextract.obj: extract.c unzip.h crypt.h X Xextract_.obj: extract.c unzip.h crypt.h X $(CC) -c -A$(MODEL) $(CFLAGS) -DSFX -Foextract_.obj extract.c X Xfile_io.obj: file_io.c unzip.h crypt.h tables.h X Xfunzip.obj: funzip.c unzip.h crypt.h tables.h X $(CC) -c -AS $(CFLAGS) funzip.c X Xinflate.obj: inflate.c unzip.h X Xinflate_.obj: inflate.c inflate.h unzip.h crypt.h X $(CC) -c -AS $(CFLAGS) -DFUNZIP -Foinflate_.obj inflate.c X Xmatch.obj: match.c unzip.h X Xmsdos.obj: msdos/msdos.c unzip.h X $(CC) -c -A$(MODEL) $(CFLAGS) msdos/msdos.c X Xmsdos_.obj: msdos/msdos.c unzip.h X $(CC) -c -A$(MODEL) $(CFLAGS) -DSFX -Fomsdos_.obj msdos/msdos.c X Xunreduce.obj: unreduce.c unzip.h X Xunshrink.obj: unshrink.c unzip.h X Xunzip.obj: unzip.c unzip.h crypt.h version.h X Xunzip_.obj: unzip.c unzip.h crypt.h version.h X $(CC) -c -A$(MODEL) $(CFLAGS) -DSFX -Founzip_.obj unzip.c X Xzipinfo.obj: zipinfo.c unzip.h X X X# MS make: X# ------- Xunzip.exe: $(OBJS) X echo $(OBJS1)+ > unzip.rsp X echo $(OBJS2)+ >> unzip.rsp X echo $(OBJS3); >> unzip.rsp X $(LD) $(LDFLAGS) @unzip.rsp X del unzip.rsp X $(STRIP) unzip.exe X X# better makes which know how to deal with 128 char limit on command line: X# ----------------------------------------------------------------------- X#unzip.exe: $(OBJS) X# $(LD) $(LDFLAGS) $(OBJS) $(LDFLAGS2) X# $(STRIP) unzip.exe X X# both makes: X# ---------- Xfunzip.exe: $(OBJF) X $(LD) $(LDFLAGS) $(OBJF) $(LDFLAGS2) X $(STRIP) funzip.exe X Xunzipsfx.exe: $(OBJX) X echo $(OBJX), $@; > unzipsfx.rsp X $(LD) $(LDFLAGS) @unzipsfx.rsp X del unzipsfx.rsp X $(STRIP) unzipsfx.exe END_OF_FILE if test 3972 -ne `wc -c <'unzip-5.12/msdos/makefile.msc'`; then echo shar: \"'unzip-5.12/msdos/makefile.msc'\" unpacked with wrong size! fi # end of 'unzip-5.12/msdos/makefile.msc' fi if test -f 'unzip-5.12/msdos/makefile.tc' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'unzip-5.12/msdos/makefile.tc'\" else echo shar: Extracting \"'unzip-5.12/msdos/makefile.tc'\" $3520 characters$ sed "s/^X//" >'unzip-5.12/msdos/makefile.tc' <<'END_OF_FILE' X#----------------------------------------------------------------------------- X# Makefile for UnZip 5.11 and later Jean-loup Gailly X# Version: Turbo C (edit and use makefile.bc for Turbo C++) 10 July 1994 X#----------------------------------------------------------------------------- X X# GNU make doesn't like the return value from "rem" X#STRIP=rem XSTRIP=echo Ignore this line. X# If you don't have LZEXE or PKLITE, get one of them. Then define: X#STRIP=lzexe X# or X#STRIP=pklite X# This makes a big difference in .exe size (and possibly load time). X X# memory model for UnZip (conflicting reports on whether Turbo C can or X# cannot put strings into far memory; for now assume it can and use small X# model *with* ZipInfo enabled...if fails, either define NO_ZIPINFO or X# use large model) [GRR 940712: sigh, no go--inflate fails. Back to X# large model...] X#MODEL = s XMODEL = l X XCC = tcc XLD = $(CC) X XUCFLAGS = -m$(MODEL) -O -Z -I. -DFar= XULDFLAGS = -m$(MODEL) X X# funzip is always small-model XFCFLAGS = -ms -O -Z -I. XFLDFLAGS = -ms X XLDFLAGS2 = X XOBJS = unzip.obj crypt.obj envargs.obj explode.obj extract.obj file_io.obj \ X inflate.obj match.obj unreduce.obj unshrink.obj zipinfo.obj msdos.obj X XOBJX = unzip_.obj crypt.obj extract_.obj file_io.obj inflate.obj match.obj \ X msdos_.obj X XOBJF = funzip.obj crypt_.obj inflate_.obj X Xdefault: unzip.exe funzip.exe unzipsfx.exe X Xclean: X rem Ignore any errors in the following... X del *.ob X del *.obj X del unzip.exe X del funzip.exe X X.c.obj: X $(CC) -c $(UCFLAGS) $*.c X Xcrypt.obj: crypt.c unzip.h crypt.h zip.h X Xcrypt_.obj: crypt.c unzip.h crypt.h zip.h X $(CC) -c $(FCFLAGS) -DFUNZIP -ocrypt_.obj crypt.c X Xenvargs.obj: envargs.c unzip.h X Xexplode.obj: explode.c unzip.h X Xextract.obj: extract.c unzip.h crypt.h X Xextract_.obj: extract.c unzip.h crypt.h X $(CC) -c $(UCFLAGS) -DSFX -oextract_.obj extract.c X Xfile_io.obj: file_io.c unzip.h crypt.h tables.h X Xfunzip.obj: funzip.c unzip.h crypt.h tables.h X $(CC) -c $(FCFLAGS) funzip.c X Xinflate_.obj: inflate.c inflate.h unzip.h crypt.h X $(CC) -c $(FCFLAGS) -DFUNZIP -oinflate_.obj inflate.c X Xinflate.obj: inflate.c inflate.h unzip.h X Xmatch.obj: match.c unzip.h X Xmsdos.obj: msdos/msdos.c unzip.h X $(CC) -c $(UCFLAGS) msdos/msdos.c X Xmsdos_.obj: msdos/msdos.c unzip.h X $(CC) -c $(UCFLAGS) -DSFX -omsdos_.obj msdos/msdos.c X Xunreduce.obj: unreduce.c unzip.h X Xunshrink.obj: unshrink.c unzip.h X Xunzip.obj: unzip.c unzip.h crypt.h version.h X Xunzip_.obj: unzip.c unzip.h crypt.h version.h X $(CC) -c $(UCFLAGS) -DSFX -ounzip_.obj unzip.c X Xzipinfo.obj: zipinfo.c unzip.h X X X# Turbo Make which cannot deal with the MS-DOS 128 byte limit: X# ----------------------------------------------------------- Xunzip.exe: $(OBJS) X rem Ignore any warnings in the following commands: X del funzip.ob X ren funzip.obj *.ob X del crypt_.ob X ren crypt_.obj *.ob X del inflate_.ob X ren inflate_.obj *.ob X $(LD) $(ULDFLAGS) -eunzip.exe *.obj X ren *.ob *.obj X $(STRIP) unzip.exe X X# better makes which know how to deal with 128 char limit on command line: X# ----------------------------------------------------------------------- X#unzip.exe: $(OBJS) X# $(LD) $(ULDFLAGS) $(OBJS) $(LDFLAGS2) X# $(STRIP) unzip.exe X X# both makes: X# ---------- Xfunzip.exe: $(OBJF) X $(LD) $(FLDFLAGS) $(OBJF) $(LDFLAGS2) X $(STRIP) funzip.exe X Xunzipsfx.exe: $(OBJX) X $(LD) $(ULDFLAGS) $(OBJX) $(LDFLAGS2) X rename unzip_.exe unzipsfx.exe X $(STRIP) unzipsfx.exe END_OF_FILE if test 3520 -ne `wc -c <'unzip-5.12/msdos/makefile.tc'`; then echo shar: \"'unzip-5.12/msdos/makefile.tc'\" unpacked with wrong size! fi # end of 'unzip-5.12/msdos/makefile.tc' fi if test -f 'unzip-5.12/nt/Makefile' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'unzip-5.12/nt/Makefile'\" else echo shar: Extracting \"'unzip-5.12/nt/Makefile'\" $2794 characters$ sed "s/^X//" >'unzip-5.12/nt/Makefile' <<'END_OF_FILE' X# NMAKE Makefile for Windows NT X# D. Feinleib 7/92 t-davefe@microsoft.com X# H. Gessau 9/93 <henryg@kullmar.kullmar.se> X# X# Last revised: 10 Jul 94 X# X# Tested with NT SDK, VC++ 1.0 for NT, and DEC C/C++ beta. X# X# For DEC C/C++, comment out the "cdebug = -Ogityb2" line (or X# define debug?). [Jack Stansbury] X X# Nmake macros for building Windows NT applications X# To build with debug info use 'nmake debug=1' X!IFNDEF debug XNODEBUG=1 X!ENDIF X!include <ntwin32.mak> X X# object files XOBJS1 = unzip.obj crypt.obj envargs.obj explode.obj extract.obj file_io.obj XOBJS2 = inflate.obj match.obj unreduce.obj unshrink.obj zipinfo.obj nt.obj XOBJS = $(OBJS1) $(OBJS2) XOBJX1 = unzipsfx.obj crypt.obj extract_.obj file_io.obj inflate.obj match.obj XOBJX2 = nt_.obj XOBJX = $(OBJX1) $(OBJX2) XOBJF = funzip.obj crypt_.obj inflate_.obj X X# cvars = $(cvars) -nologo -DMSDOS -DNO_ASM -J Xcvars = $(cvars) -nologo -DNO_ASM -J X X# Some optimization (if not debugging) X!IFDEF NODEBUG Xcdebug = -Ogityb2 X!ENDIF X X# How to compile sources X.c.obj: X $(cc) $(cdebug) $(cflags) $(cvars) $< X X# How to link X.obj.exe: X $(link) $(ldebug) $(conflags) $(conlibs) $** -out:$@ X X X# Default target is all the executables Xunzips : unzip.exe funzip.exe unzipsfx.exe X X Xunzip.exe: $(OBJS) Xunzipsfx.exe: $(OBJX) Xfunzip.exe: $(OBJF) X Xcrypt.obj: crypt.c unzip.h zip.h crypt.h Xenvargs.obj: envargs.c unzip.h Xexplode.obj: explode.c unzip.h Xextract.obj: extract.c unzip.h crypt.h Xfile_io.obj: file_io.c unzip.h crypt.h tables.h Xfunzip.obj: funzip.c unzip.h crypt.h tables.h Xinflate.obj: inflate.c inflate.h unzip.h Xmatch.obj: match.c unzip.h Xunreduce.obj: unreduce.c unzip.h Xunshrink.obj: unshrink.c unzip.h Xunzip.obj: unzip.c unzip.h crypt.h version.h Xzipinfo.obj: zipinfo.c unzip.h X Xnt.obj: nt\nt.c unzip.h X $(cc) $(cdebug) $(cflags) $(cvars) -I. nt\nt.c X Xnt_.obj: nt\nt.c unzip.h # unzipsfx only X copy nt\nt.c nt_.c X $(cc) $(cdebug) $(cflags) $(cvars) -DSFX nt_.c X del nt_.c X Xcrypt_.obj: crypt.c unzip.h zip.h crypt.h # funzip only X copy crypt.c crypt_.c X $(cc) $(cdebug) $(cflags) $(cvars) -DFUNZIP crypt_.c X del crypt_.c X Xextract_.obj: extract.c unzip.h crypt.h # unzipsfx only X copy extract.c extract_.c X $(cc) $(cdebug) $(cflags) $(cvars) -DSFX extract_.c X del extract_.c X Xinflate_.obj: inflate.c inflate.h unzip.h crypt.h # funzip only X copy inflate.c inflate_.c X $(cc) $(cdebug) $(cflags) $(cvars) -DFUNZIP inflate_.c X del inflate_.c X Xunzipsfx.obj: unzip.c unzip.h crypt.h version.h # unzipsfx only X copy unzip.c unzipsfx.c X $(cc) $(cdebug) $(cflags) $(cvars) -DSFX unzipsfx.c X del unzipsfx.c X Xzipinfo_.obj: zipinfo.c unzip.h # unzipsfx only X copy zipinfo.c zipinfo_.c X $(cc) $(cdebug) $(cflags) $(cvars) -DSFX zipinfo_.c X del zipinfo_.c X Xclean: X del /q $(OBJS) unzip.exe $(OBJF) funzip.exe $(OBJX) unzipsfx.exe END_OF_FILE if test 2794 -ne `wc -c <'unzip-5.12/nt/Makefile'`; then echo shar: \"'unzip-5.12/nt/Makefile'\" unpacked with wrong size! fi # end of 'unzip-5.12/nt/Makefile' fi if test -f 'unzip-5.12/os2/Contents' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'unzip-5.12/os2/Contents'\" else echo shar: Extracting \"'unzip-5.12/os2/Contents'\" $613 characters$ sed "s/^X//" >'unzip-5.12/os2/Contents' <<'END_OF_FILE' XContents of the "os2" sub-archive for UnZip 5.12 and later: X X Contents this file X makefile.os2 makefile for almost every compiler available under OS/2 X os2.c OS/2-specific support routines X unzip16.def OS/2 linker definition file (16-bit) X unzip.def OS/2 linker definition file (32-bit) X zipgrep.cmd really cool REXX script to search for strings in a zipfile X wat_met.dif patch for Watcom C DOS/OS2-1.x versions and Metaware High C++ X XThere is no support for the Zortech or GCC/2 (Michael Johnson/Colin XJensen) compilers. emx+gcc is supported. New makefile targets are Xwelcome... END_OF_FILE if test 613 -ne `wc -c <'unzip-5.12/os2/Contents'`; then echo shar: \"'unzip-5.12/os2/Contents'\" unpacked with wrong size! fi # end of 'unzip-5.12/os2/Contents' fi if test -f 'unzip-5.12/os2/zipgrep.cmd' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'unzip-5.12/os2/zipgrep.cmd'\" else echo shar: Extracting \"'unzip-5.12/os2/zipgrep.cmd'\" $1601 characters$ sed "s/^X//" >'unzip-5.12/os2/zipgrep.cmd' <<'END_OF_FILE' X/*--------------------------------------------------------------------------- X X zipgrep.cmd (ye olde REXX procedure for OS/2) X X Script to search members of a zipfile for a string or regular expression X and print the names of any such members (and, optionally, the matching X text). The search is case-insensitive by default. X X History: X original Bourne shell version by Jean-loup Gailly X modified by Greg Roelofs for Ultrix (no egrep -i) and zipinfo -1 X OS/2 REXX script by Greg Roelofs X X Last modified: 19 Jul 93 X X ---------------------------------------------------------------------------*/ X XPARSE ARG string zipfile members X Xif (string == '') then do X say 'usage: zipgrep search_string zipfile [members...]' X say ' Displays the names of zipfile members containing a given string,' X say ' in addition to the matching text. This procedure requires unzip' X say ' and egrep in the current path, and it is quite slow....' X exit 1 Xend X X/* doesn't seem to work... Xnewq = RXQUEUE("Create",zipgrep_pipe) Xoldq = RXQUEUE("Set",newq) X */ X X/* flush the queue before starting */ Xdo QUEUED() X PULL junk Xend X X/* GRR: can also add "2>&1" before pipe in following external command */ X'@unzip -Z1' zipfile members '| rxqueue' X Xdo while QUEUED() > 0 X PARSE PULL file X '@unzip -p' zipfile file '| egrep -is' string X if rc == 0 then do X SAY file':' X /* can comment out following line if just want filenames */ X '@unzip -p' zipfile file '| egrep -i' string X end Xend X X/* Xcall RXQUEUE "Delete",newq Xcall RXQUEUE "Set",oldq X */ X Xexit 0 END_OF_FILE if test 1601 -ne `wc -c <'unzip-5.12/os2/zipgrep.cmd'`; then echo shar: \"'unzip-5.12/os2/zipgrep.cmd'\" unpacked with wrong size! fi # end of 'unzip-5.12/os2/zipgrep.cmd' fi if test -f 'unzip-5.12/unix/Contents' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'unzip-5.12/unix/Contents'\" else echo shar: Extracting \"'unzip-5.12/unix/Contents'\" $640 characters$ sed "s/^X//" >'unzip-5.12/unix/Contents' <<'END_OF_FILE' XContents of the "unix" sub-archive for UnZip 5.11 and later: X X Contents this file X Makefile makefile for UnZip for various architectures and OS's X unix.c Unix-specific support routines X unzip.1 UnZip manual page, nroff format X unzipsfx.1 UnZipSFX manual page, nroff format X zipinfo.1 ZipInfo manual page, nroff format X funzip.1 fUnZip manual page, nroff format X XType "make" or "make help" to get general compile instructions (beyond Xthose in the INSTALL file), or "make list" for a list of makefile targets. XNote that there are some MS-DOS and cross-compilation targets thrown in Xjust to make things more exciting. END_OF_FILE if test 640 -ne `wc -c <'unzip-5.12/unix/Contents'`; then echo shar: \"'unzip-5.12/unix/Contents'\" unpacked with wrong size! fi # end of 'unzip-5.12/unix/Contents' fi if test -f 'unzip-5.12/vms/Contents' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'unzip-5.12/vms/Contents'\" else echo shar: Extracting \"'unzip-5.12/vms/Contents'\" $1682 characters$ sed "s/^X//" >'unzip-5.12/vms/Contents' <<'END_OF_FILE' XContents of the "vms" sub-archive for UnZip 5.12 and later: X X Contents this file X README general VMS info about using UnZip and zipfiles X unzip_def.rnh UnZip default help page, RUNOFF format X unzip_cli.help UnZip VMSCLI help page, TPU format X unzipsfx.hlp UnZipSFX pre-formatted help page X cvthelp.tpu TPU macro file to convert .help file to RUNOFF format X cmdline.c VMS-style command-line-interface code (if VMSCLI defined) X unz_cld.cld more VMS-command-line stuff (if VMSCLI defined) X vms.c VMS file manipulation code X vms.h VMS header file for UnZip X make.com command file to make UnZip with GNU or DEC C on VAX or AXP X descrip.mms MMK/MMS makefile for UnZip/ZipInfo and UnZipSFX X vmsshare.opt options file used by descrip.mms X unzip.opt options file used by descrip.mms and make.com X unzipsfx.opt options file used by descrip.mms and make.com X clean.com command file to remove .obj and .exe files; used with MMS X makesfx.com command file to create self-extracting archives X XMAKE/VMS is no longer supported since MMK (MMS clone by Matt Madison/MadGoat XEnterprises, compatible with descrip.mms) is both free and becoming quite Xpopular. MMK is available by anonymous ftp from ftp.spc.edu/ftp.wku.edu and Xby mailserver at wkuvx1.wku.edu. Check VMS newsgroups for announcements and Xexact location. X XThe MAKE.COM command file accepts compilation options in a LOCAL_UNZIP Xsymbol or logical; the format is "VMSCLI,RETURN_SEVERITY" (for example). XDESCRIP.MMS must be edited in order to use special options. END_OF_FILE if test 1682 -ne `wc -c <'unzip-5.12/vms/Contents'`; then echo shar: \"'unzip-5.12/vms/Contents'\" unpacked with wrong size! fi # end of 'unzip-5.12/vms/Contents' fi if test -f 'unzip-5.12/vms/clean.com' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'unzip-5.12/vms/clean.com'\" else echo shar: Extracting \"'unzip-5.12/vms/clean.com'\" $803 characters$ sed "s/^X//" >'unzip-5.12/vms/clean.com' <<'END_OF_FILE' X$! X$! Clean.com -- procedure to delete files. It always returns success X$! status despite any error or warnings. Also it extracts X$! filename from MMS "module=file" format. X$! X$ on control_y then goto ctly X$ if p1.eqs."" then exit 1 X$ i = -1 X$scan_list: X$ i = i+1 X$ item = f$elem(i,",",p1) X$ if item.eqs."" then goto scan_list X$ if item.eqs."," then goto done ! End of list X$ item = f$edit(item,"trim") ! Clean of blanks X$ wild = f$elem(1,"=",item) X$ show sym wild X$ if wild.eqs."=" then wild = f$elem(0,"=",item) X$ vers = f$parse(wild,,,"version","syntax_only") X$ if vers.eqs.";" then wild = wild - ";" + ";*" X$scan: X$ f = f$search(wild) X$ if f.eqs."" then goto scan_list X$ on error then goto err X$ on warning then goto warn X$ delete/log 'f' X$warn: X$err: X$ goto scan X$done: X$ctly: X$ exit 1 END_OF_FILE if test 803 -ne `wc -c <'unzip-5.12/vms/clean.com'`; then echo shar: \"'unzip-5.12/vms/clean.com'\" unpacked with wrong size! fi # end of 'unzip-5.12/vms/clean.com' fi if test -f 'unzip-5.12/vms/make.com' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'unzip-5.12/vms/make.com'\" else echo shar: Extracting \"'unzip-5.12/vms/make.com'\" $3756 characters$ sed "s/^X//" >'unzip-5.12/vms/make.com' <<'END_OF_FILE' X$ ! X$ ! "Makefile" for VMS versions of UnZip/ZipInfo and UnZipSFX X$ ! X$ ! To define additional options, define the global symbol X$ ! LOCAL_UNZIP prior to executing MAKE.COM: X$ ! X$ ! $ LOCAL_UNZIP == "VMSCLI,RETURN_SEVERITY," X$ ! $ @MAKE X$ ! X$ ! The trailing "," may be omitted. Valid VMS-specific options X$ ! include VMSCLI, VMSWILD, RETURN_SEVERITY and RETURN_CODES; see X$ ! the INSTALL file for other options (e.g., CHECK_EOF). X$ ! X$ ! X$ ! Find out current disk, directory, compiler and options X$ ! X$ my_name = f$env("procedure") X$ here = f$parse(my_name,,,"device") + f$parse(my_name,,,"directory") X$ if f$type(LOCAL_UNZIP).eqs."" X$ then X$ local_unzip = "" X$ else ! Trim blanks and append comma if missing X$ local_unzip = f$edit(local_unzip, "TRIM") X$ if f$extract(f$length(local_unzip)-1, 1, local_unzip).nes."," then - X local_unzip = local_unzip + "," X$ endif X$ axp = f$getsyi("HW_MODEL").ge.1024 X$ if axp X$ then X$ cc = "cc/standard=vaxc/ansi/nowarnings/include=[]" X$ defs = "''local_unzip'MODERN" X$ opts = "" X$ else X$ defs = "''local_unzip'VMS" X$ opts = ",[.VMS]VMSSHARE.OPT/OPTIONS" X$ if (f$search("SYS$SYSTEM:VAXC.EXE").eqs."" .and. - X f$trnlnm("GNU_CC").nes."") .or. (p1.eqs."GCC") X$ then X$ cc = "gcc" X$ opts = "''opts',GNU_CC:[000000]GCCLIB.OLB/LIB" X$ else X$ cc = "cc" X$ endif X$ endif X$ def = "/define=(''defs')" X$ old_ver = f$ver(1) ! Turn echo on to see what's happening X$ on error then goto error X$ on control_y then goto error X$ ! X$ x = "" X$ if f$search("SYS$LIBRARY:SYS$LIB_C.TLB").nes."" then - X x = "+SYS$LIBRARY:SYS$LIB_C.TLB/LIBRARY" X$ 'CC'/NOLIST'DEF' /OBJ=UNZIP.OBJ UNZIP.C X$ 'CC'/NOLIST'DEF' /OBJ=CRYPT.OBJ CRYPT.C X$ 'CC'/NOLIST'DEF' /OBJ=ENVARGS.OBJ ENVARGS.C X$ 'CC'/NOLIST'DEF' /OBJ=EXPLODE.OBJ EXPLODE.C X$ 'CC'/NOLIST'DEF' /OBJ=EXTRACT.OBJ EXTRACT.C X$ 'CC'/NOLIST'DEF' /OBJ=FILE_IO.OBJ FILE_IO.C X$ 'CC'/NOLIST'DEF' /OBJ=INFLATE.OBJ INFLATE.C X$ 'CC'/NOLIST'DEF' /OBJ=MATCH.OBJ MATCH.C X$ 'CC'/NOLIST'DEF' /OBJ=UNREDUCE.OBJ UNREDUCE.C X$ 'CC'/NOLIST'DEF' /OBJ=UNSHRINK.OBJ UNSHRINK.C X$ 'CC'/NOLIST'DEF' /OBJ=ZIPINFO.OBJ ZIPINFO.C X$ 'CC'/INCLUDE=SYS$DISK:[]'DEF' /OBJ=[.VMS]VMS.OBJ; [.VMS]VMS.C'x' X$ ! X$ local_unzip = f$edit(local_unzip,"UPCASE,TRIM") X$ if f$locate("VMSCLI",local_unzip).ne.f$length(local_unzip) X$ then X$ 'CC'/INCLUDE=SYS$DISK:[]'DEF' /OBJ=[.VMS]CMDLINE.OBJ; [.VMS]CMDLINE.C'x' X$ 'CC'/INCLUDE=SYS$DISK:[]/DEF=('DEFS',SFX) /OBJ=[.VMS]CMDLINE_.OBJ; - X [.VMS]CMDLINE.C'x' X$ set command/obj=[.vms]unz_cld.obj [.vms]unz_cld.cld X$ cliobjs = ",[.vms]cmdline.obj, [.vms]unz_cld.obj" X$ cliobjx = ",[.vms]cmdline_.obj, [.vms]unz_cld.obj" X$ set default [.vms] X$ edit/tpu/nosection/nodisplay/command=cvthelp.tpu unzip_cli.help X$ set default [-] X$ runoff/out=unzip.hlp [.vms]unzip_cli.rnh X$ else X$ cliobjs = "" X$ cliobjx = "" X$ runoff/out=unzip.hlp [.vms]unzip_def.rnh X$ endif X$ ! X$ LINK /NOTRACE/EXE=UNZIP.EXE unzip.obj;, crypt.obj;, envargs.obj;, - X explode.obj;, extract.obj;, file_io.obj;, inflate.obj;, match.obj;, - X unreduce.obj;, unshrink.obj;, zipinfo.obj;, [.VMS]vms.obj; - X 'cliobjs' 'opts', [.VMS]unzip.opt/opt X$ ! X$ 'CC'/DEF=('DEFS',SFX)/NOLIST /OBJ=UNZIPSFX.OBJ UNZIP.C X$ 'CC'/DEF=('DEFS',SFX)/NOLIST /OBJ=EXTRACT_.OBJ EXTRACT.C X$ 'CC'/DEF=('DEFS',SFX)/INCLUDE=SYS$DISK:[] /OBJ=[.VMS]VMS_.OBJ; [.VMS]VMS.C'x' X$ LINK /NOTRACE/EXE=UNZIPSFX.EXE unzipsfx.obj;, crypt.obj;, extract_.obj;, - X file_io.obj;, inflate.obj;, match.obj;, [.VMS]vms_.obj; - X 'cliobjx' 'opts', [.VMS]unzipsfx.opt/opt X$ ! X$ ! Next line: put similar lines (full pathname for unzip.exe) in X$ ! login.com. Remember to include the leading "$" before disk name. X$ ! X$! unzip == "$''here'unzip.exe" ! set up symbol to use unzip X$! zipinfo == "$''here'unzip.exe ""-Z""" ! set up symbol to use zipinfo X$ ! X$error: X$ tmp = f$ver(old_ver) X$ exit END_OF_FILE if test 3756 -ne `wc -c <'unzip-5.12/vms/make.com'`; then echo shar: \"'unzip-5.12/vms/make.com'\" unpacked with wrong size! fi # end of 'unzip-5.12/vms/make.com' fi if test -f 'unzip-5.12/vms/unz_cld.cld' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'unzip-5.12/vms/unz_cld.cld'\" else echo shar: Extracting \"'unzip-5.12/vms/unz_cld.cld'\" $1711 characters$ sed "s/^X//" >'unzip-5.12/vms/unz_cld.cld' <<'END_OF_FILE' X Module VMS_UNZIP_CLD X Ident "01-000" X XDefine Verb UNZIP X Parameter P1, Label=ZIPFILE, Prompt="Zip file" X Parameter P2, Label=INFILE, VALUE(LIST), Prompt="Files to UnZip" X Qualifier TEXT, Negatable X Qualifier AUTOTEXT, Negatable X Qualifier SCREEN, Negatable X Qualifier DIRECTORY, VALUE(REQUIRED,TYPE=$FILE), Nonnegatable X Qualifier FRESHEN, Negatable X Qualifier JUNK, Negatable X Qualifier LIST, Nonnegatable X Qualifier BRIEF, Nonnegatable, Default X Qualifier FULL, Nonnegatable X Qualifier OVERWRITE, Negatable X Qualifier QUIET, Nonnegatable X Qualifier SUPER_QUIET, Nonnegatable X Qualifier TEST, Negatable X Qualifier TYPE, Nonnegatable X Qualifier PIPE, Nonnegatable X Qualifier UPPERCASE, Negatable X Qualifier UPDATE, Negatable X Qualifier VERSION, Negatable X Qualifier VERBOSE, Nonnegatable X Qualifier RESTORE, Negatable X Qualifier COMMENT, Negatable X Qualifier EXCLUDE, VALUE(LIST), Nonnegatable X Qualifier CASE_INSENSITIVE, Negatable X Qualifier LOWERCASE, Negatable X Qualifier YYZ, NonNegatable, Default X Qualifier ZIPINFO, Syntax=INFORMATION, NonNegatable X DisAllow BRIEF and FULL X DisAllow DIRECTORY and SCREEN X XDefine Type COMMENTS_KEYWORDS X Keyword ZIP_FILE, DEFAULT X Keyword FILES X XDefine Syntax INFORMATION X Parameter P1, Label=ZIPFILE, Prompt="Zip file" X Parameter P2, Label=INFILE, VALUE(LIST), Prompt="Files to display" X Qualifier ZIPINFO, NonNegatable, Default X Qualifier SHORT, Nonnegatable X Qualifier MEDIUM, Nonnegatable X Qualifier LONG, Nonnegatable X Qualifier VERBOSE, Nonnegatable X Qualifier HEADER, Nonnegatable X Qualifier COMMENT, Nonnegatable X Qualifier TOTALS, Nonnegatable X Qualifier TIMES, Nonnegatable X Qualifier EXCLUDE, VALUE(LIST), Nonnegatable X Qualifier ONE_LINE, Nonnegatable END_OF_FILE if test 1711 -ne `wc -c <'unzip-5.12/vms/unz_cld.cld'`; then echo shar: \"'unzip-5.12/vms/unz_cld.cld'\" unpacked with wrong size! fi # end of 'unzip-5.12/vms/unz_cld.cld' fi if test -f 'unzip-5.12/zip.h' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'unzip-5.12/zip.h'\" else echo shar: Extracting \"'unzip-5.12/zip.h'\" $442 characters$ sed "s/^X//" >'unzip-5.12/zip.h' <<'END_OF_FILE' X/* This is a dummy zip.h to allow crypt.c from Zip to compile for UnZip */ X X#ifndef __zip_h /* don't include more than once */ X#define __zip_h X X#include "unzip.h" X X#define decrypt_member decrypt /* for compatibility with zcrypt20 */ X#define local static X#define CRC32(c, b) (crc_32_tab[((int)(c) ^ (b)) & 0xff] ^ ((c) >> 8)) X X#ifdef FUNZIP X extern ulg near crc_32_tab[]; X#else X extern ulg *crc_32_tab; X#endif X X#endif /* !__zip_h */ END_OF_FILE if test 442 -ne `wc -c <'unzip-5.12/zip.h'`; then echo shar: \"'unzip-5.12/zip.h'\" unpacked with wrong size! fi # end of 'unzip-5.12/zip.h' fi echo shar: End of archive 19 $of 20$. cp /dev/null ark19isdone MISSING="" for I in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 ; do if test ! -f ark${I}isdone ; then MISSING="${MISSING} ${I}" fi done if test "${MISSING}" = "" ; then echo You have unpacked all 20 archives. rm -f ark[1-9]isdone ark[1-9][0-9]isdone else echo You still must unpack the following archives: echo " " ${MISSING} fi exit 0 exit 0 # Just in case...