Usenet 1994 October

home *** CD-ROM | disk | FTP | other *** search

/ Usenet 1994 October / usenetsourcesnewsgroupsinfomagicoctober1994disk2.iso / misc / volume21 / ecu / part31 < prev next >

Wrap

Text File | 1991-08-05 | 53.4 KB | 1,754 lines

Newsgroups: comp.sources.misc From: Warren Tucker <wht@n4hgf.Mt-Park.GA.US> Subject: v21i083: ecu - ECU async comm package rev 3.10, Part31/37 Message-ID: <1991Aug5.211927.8288@sparky.IMD.Sterling.COM> X-Md4-Signature: bde7e60cbaf1053f2a017290c496cccb Date: Mon, 5 Aug 1991 21:19:27 GMT Approved: kent@sparky.imd.sterling.com Submitted-by: Warren Tucker <wht@n4hgf.Mt-Park.GA.US> Posting-number: Volume 21, Issue 83 Archive-name: ecu/part31 Environment: SCO, XENIX, ISC Supersedes: ecu3: Volume 16, Issue 25-59 ---- Cut Here and feed the following to sh ---- #!/bin/sh # this is ecu310.31 (part 31 of ecu310) # do not concatenate these parts, unpack them in order with /bin/sh # file fasi/fas.c continued # if touch 2>&1 | fgrep 'amc' > /dev/null then TOUCH=touch else TOUCH=true fi if test ! -r _shar_seq_.tmp; then echo 'Please unpack part 1 first!' exit 1 fi (read Scheck if test "$Scheck" != 31; then echo Please unpack part "$Scheck" next! exit 1 else exit 0 fi ) < _shar_seq_.tmp || exit 1 if test ! -f _shar_wnt_.tmp; then echo 'x - still skipping fasi/fas.c' else echo 'x - continuing file fasi/fas.c' sed 's/^X//' << 'SHAR_EOF' >> 'fasi/fas.c' && X int num_save; X int old_level; X X ttyp = fip->tty; X X for (;;) X { X /* Check if tbuf is empty. If it is empty, reset buffer X pointer and counter and get the next chunk of output X characters. X */ X if (!ttyp->t_tbuf.c_ptr || !ttyp->t_tbuf.c_count) X { X if (ttyp->t_tbuf.c_ptr) X ttyp->t_tbuf.c_ptr -= ttyp->t_tbuf.c_size; X if (!((*linesw [ttyp->t_line].l_output) (ttyp) X & CPRES)) X break; X } X X /* set the maximum character limit */ X num_to_xfer = fip->xmit_ring_size - fip->xmit_ring_cnt; X X /* Return if transmitter ring buffer is full. */ X if (num_to_xfer < 1) X break; X X /* Determine how many chars to transfer this time. */ X if (&fip->xmit_buffer [XMIT_BUFF_SIZE] - fip->xmit_ring_put_ptr X < num_to_xfer) X num_to_xfer = &fip->xmit_buffer [XMIT_BUFF_SIZE] X - fip->xmit_ring_put_ptr; X if (ttyp->t_tbuf.c_count < num_to_xfer) X num_to_xfer = ttyp->t_tbuf.c_count; X X num_save = num_to_xfer; X ttyp->t_tbuf.c_count -= num_to_xfer; X ttyp->t_state |= BUSY; X X /* do the transfer */ X do X { X *fip->xmit_ring_put_ptr = *ttyp->t_tbuf.c_ptr; X ttyp->t_tbuf.c_ptr++; X fip->xmit_ring_put_ptr++; X } while (--num_to_xfer); X X if (fip->xmit_ring_put_ptr == &fip->xmit_buffer [XMIT_BUFF_SIZE]) X fip->xmit_ring_put_ptr = &fip->xmit_buffer [0]; X X intr_disable (); X fip->xmit_ring_cnt += num_save; X intr_restore (); X } X} X X/* Input buffer high/low water mark check. */ Xstatic void Xfas_ihlw_check (fip) Xregister struct fas_info *fip; X{ X REGVAR; X X if (fip->flow_flags.i & FF_HWI_STOPPED) X { X /* If input buffer level has dropped below X the low water mark and input was stopped X by hardware handshake, restart input. X */ X if (fip->recv_ring_cnt < HW_LOW_WATER) X { X fip->mcr |= fip->flow.m.ic; X fas_first_outb (fip, MDM_CTL_PORT, fip->mcr); X fip->flow_flags.s &= ~FF_HWI_STOPPED; X } X } X else X { X /* If input buffer level has risen above the X high water mark and input is not yet X stopped, stop input by hardware handshake. X */ X if ((fip->flow_flags.i & FF_HWI_HANDSHAKE) X && (fip->recv_ring_cnt > HW_HIGH_WATER)) X { X fip->mcr &= ~fip->flow.m.ic; X fas_first_outb (fip, MDM_CTL_PORT, fip->mcr); X fip->flow_flags.s |= FF_HWI_STOPPED; X#if defined(FASI) X fip->rcvr_hw_flow_count++; X (void)wakeup((caddr_t)&fip->device_flags.i); X#endif /* FASI */ X } X } X X if (fip->flow_flags.i & FF_SWI_STOPPED) X { X /* If input buffer level has dropped below X the low water mark and input was stopped X by XOFF, send XON to restart input. X */ X if (!(fip->iflag & IXOFF) X || (fip->recv_ring_cnt < SW_LOW_WATER)) X { X fip->flow_flags.s &= ~FF_SWI_STOPPED; X fip->flow_flags.s ^= FF_SW_FC_REQ; X if (fip->flow_flags.i & FF_SW_FC_REQ) X { X fip->tty->t_state |= TTXON; X fas_xproc (fip); X } X else X fip->tty->t_state &= ~TTXOFF; X } X } X else X { X /* If input buffer level has risen above the X high water mark and input is not yet X stopped, send XOFF to stop input. X */ X if ((fip->iflag & IXOFF) X && (fip->recv_ring_cnt > SW_HIGH_WATER)) X { X fip->flow_flags.s |= FF_SWI_STOPPED; X fip->flow_flags.s ^= FF_SW_FC_REQ; X if (fip->flow_flags.i & FF_SW_FC_REQ) X { X fip->tty->t_state |= TTXOFF; X fas_xproc (fip); X#if defined(FASI) X fip->rcvr_sw_flow_count++; X (void)wakeup((caddr_t)&fip->device_flags.i); X#endif /* FASI */ X } X else X fip->tty->t_state &= ~TTXON; X } X } X} X X/* Half-duplex hardware flow control check. */ Xstatic void Xfas_hdx_check (fip) Xregister struct fas_info *fip; X{ X REGVAR; X X /* don't interfere with hardware input handshake */ X if (fip->flow_flags.i & FF_HWI_HANDSHAKE) X return; X X#if defined (HAVE_VPIX) X /* don't touch the mcr if we are in dos mode and hdx hardware X handshake is disabled (dos handles the handshake line(s) X on its own in this mode) X */ X if ((fip->iflag & DOSMODE) && !(fip->flow_flags.i & FF_HDX_HANDSHAKE)) X return; X#endif X if (fip->flow_flags.i & FF_HDX_STARTED) X { X /* If output buffer is empty signal the connected X device that all output is done. X */ X if ((fip->flow_flags.i & FF_HDX_HANDSHAKE) X && !(fip->tty->t_state & BUSY)) X { X fip->mcr &= ~fip->flow.m.hc; X fas_first_outb (fip, MDM_CTL_PORT, fip->mcr); X fip->flow_flags.s &= ~FF_HDX_STARTED; X } X } X else X { X /* If the output ring buffer contains characters X and was previously empty signal the connected X device that output is resumed. X */ X if (!(fip->flow_flags.i & FF_HDX_HANDSHAKE) X || (fip->tty->t_state & BUSY)) X { X fip->mcr |= fip->flow.m.hc; X fas_first_outb (fip, MDM_CTL_PORT, fip->mcr); X fip->flow_flags.s |= FF_HDX_STARTED; X } X } X} X X/* Handle hangup after last close */ Xstatic void Xfas_hangup (fip) Xregister struct fas_info *fip; X{ X int old_level; X REGVAR; X X old_level = SPLINT (); X X if (fip->device_flags.i & DF_DO_HANGUP) X { X /* do the hangup */ X fip->mcr &= ~(fip->modem.m.ei X | fip->modem.m.eo); X fip->mcr |= fip->modem.m.di; X fas_first_outb (fip, MDM_CTL_PORT, fip->mcr); X fip->device_flags.s &= ~(DF_MODEM_ENABLED | DF_DO_HANGUP); X (void) timeout (fas_hangup, fip, (fip->device_flags.i X & DF_DEVICE_CONFIGURED) X ? (HANGUP_TIME) * (HZ) / 1000 X : (RECOVER_TIME) * (HZ)); X } X else X { X /* unlock the device */ X fip->device_flags.s |= DF_DEVICE_CONFIGURED; X /* If there was a waiting getty open on this X port, reopen the physical device. X */ X if (fip->o_state & OS_WAIT_OPEN) X { X fas_open_device (fip); X fas_param (fip, HARD_INIT); /* set up port regs */ X } X release_device_lock (fip); X } X (void) splx (old_level); X} X X/* main timeout function */ Xstatic void Xfas_timeout (fip) Xregister struct fas_info *fip; X{ X int old_level; X REGVAR; X X old_level = SPLINT (); X X /* handle break request */ X if (fip->device_flags.i & DF_DO_BREAK) X { X /* set up break request flags */ X fip->lcr |= LC_SET_BREAK_LEVEL; X fas_first_outb (fip, LINE_CTL_PORT, fip->lcr); X fip->device_flags.s &= ~(DF_DO_BREAK | DF_GUARD_TIMEOUT); X (void) timeout (fas_timeout, fip, (BREAK_TIME) * (HZ) / 1000); X (void) splx (old_level); X return; X } X X /* reset break state */ X if (fip->device_flags.i & DF_XMIT_BREAK) X { X if (fip->lcr & LC_SET_BREAK_LEVEL) X { X fip->lcr &= ~LC_SET_BREAK_LEVEL; X fas_first_outb (fip, LINE_CTL_PORT, fip->lcr); X fip->device_flags.s |= DF_GUARD_TIMEOUT; X fip->timeout_idx = timeout (fas_timeout, fip, X fas_ctimes [fip->cflag & CBAUD]); X (void) splx (old_level); X return; X } X fip->device_flags.s &= ~DF_XMIT_BREAK; X /* restart output after BREAK */ X fas_xproc (fip); X } X X /* handle character guard timeout */ X if (fip->device_flags.i & DF_GUARD_TIMEOUT) X { X fip->device_flags.s &= ~DF_GUARD_TIMEOUT; X if (!fip->xmit_ring_cnt) X { X fip->tty->t_state &= ~BUSY; X fas_hdx_check (fip); X } X } X X fip->tty->t_state &= ~TIMEOUT; X X event_sched (fip, EF_DO_XXFER); X X (void) wakeup ((caddr_t) &(fip)->device_flags.i); X (void) splx (old_level); X} X X/* Several functions for flow control, character output and special event X requests and handling. X*/ Xstatic void Xfas_cmd (fip, ttyp, arg2) Xregister struct fas_info *fip; Xregister struct tty *ttyp; Xint arg2; X{ X REGVAR; X X switch (arg2) X { X case T_TIME: /* timeout */ X goto start_output; X X case T_OUTPUT: /* output characters to the transmitter */ X if (fip->xmit_ring_size > fip->xmit_ring_cnt) X { Xstart_output: X event_sched (fip, EF_DO_XXFER); X } X break; X X case T_SUSPEND: /* suspend character output */ X fip->flow_flags.s |= FF_SWO_STOPPED; X#if defined(FASI) X fip->xmtr_sw_flow_count++; X (void)wakeup((caddr_t)&fip->device_flags.i); X#endif /* FASI */ X ttyp->t_state |= TTSTOP; X break; X X case T_RESUME: /* restart character output */ X fip->flow_flags.s &= ~FF_SWO_STOPPED; X ttyp->t_state &= ~TTSTOP; X fas_xproc (fip); X break; X X case T_BLOCK: /* stop character input, request XOFF */ X ttyp->t_state |= TBLOCK; X break; /* note: we do our own XON/XOFF */ X X case T_UNBLOCK: /* restart character input, request XON */ X ttyp->t_state &= ~TBLOCK; X break; /* note: we do our own XON/XOFF */ X X case T_RFLUSH: /* flush input buffers and restart input */ X if (fip->device_flags.i & DF_DEVICE_IS_NS16550A) X fas_first_outb (fip, NS_FIFO_CTL_PORT, NS_FIFO_SETUP_CMD X | NS_FIFO_CLR_RECV); X else if (fip->device_flags.i & DF_DEVICE_IS_I82510) X { X fas_first_outb (fip, I_BANK_PORT, I_BANK_1); X fas_outb (fip, I_RCM_PORT, I_FIFO_CLR_RECV); X fas_outb (fip, I_BANK_PORT, I_BANK_0); X } X X fip->recv_ring_take_ptr = fip->recv_ring_put_ptr; X fip->recv_ring_cnt = 0; X ttyp->t_state &= ~TBLOCK; X X fas_ihlw_check (fip); X break; X X case T_WFLUSH: /* flush output buffer and restart output */ X if (fip->device_flags.i & DF_DEVICE_IS_NS16550A) X fas_first_outb (fip, NS_FIFO_CTL_PORT, NS_FIFO_SETUP_CMD X | NS_FIFO_CLR_XMIT); X else if (fip->device_flags.i & DF_DEVICE_IS_I82510) X { X fas_first_outb (fip, I_BANK_PORT, I_BANK_1); X fas_outb (fip, I_TCM_PORT, I_FIFO_CLR_XMIT); X fas_outb (fip, I_BANK_PORT, I_BANK_0); X } X X fip->xmit_ring_take_ptr = fip->xmit_ring_put_ptr; X fip->xmit_ring_cnt = 0; X X fip->flow_flags.s &= ~FF_SWO_STOPPED; X ttyp->t_state &= ~TTSTOP; X X if (ttyp->t_tbuf.c_ptr) X ttyp->t_tbuf.c_ptr += ttyp->t_tbuf.c_count; X ttyp->t_tbuf.c_count = 0; X X if (!(fip->device_flags.i & (DF_XMIT_BUSY | DF_GUARD_TIMEOUT))) X { X ttyp->t_state &= ~BUSY; X fas_hdx_check (fip); X goto start_output; X } X break; X X case T_BREAK: /* do a break on the transmitter line */ X fip->device_flags.s |= DF_XMIT_BREAK; X ttyp->t_state |= TIMEOUT; X if (fip->device_flags.i & (DF_XMIT_BUSY | DF_GUARD_TIMEOUT)) X { X fip->device_flags.s |= DF_DO_BREAK; X } X else X { X /* set up break request flags */ X fip->lcr |= LC_SET_BREAK_LEVEL; X fas_first_outb (fip, LINE_CTL_PORT, fip->lcr); X (void) timeout (fas_timeout, fip, (BREAK_TIME) * (HZ) X / 1000); X } X break; X X case T_PARM: /* set up the port according to the termio structure */ X fas_param (fip, SOFT_INIT); X break; X X case T_SWTCH: /* handle layer switch request */ X break; X } X} X X/* open device physically */ Xstatic void Xfas_open_device (fip) Xregister struct fas_info *fip; X{ X REGVAR; X X /* if already open, set up the mcr register only */ X if (fip->device_flags.i & DF_DEVICE_OPEN) X goto setmcr; X X /* init some variables */ X fip->device_flags.s &= DF_DEVICE_CONFIGURED | DF_DEVICE_IS_NS16550A X | DF_DEVICE_IS_I82510 | DF_DEVICE_LOCKED X | DF_CTL_FIRST | DF_CTL_EVERY; X fip->flow_flags.s = 0; X fip->cflag = 0; X fip->iflag = 0; X fip->recv_ring_take_ptr = fip->recv_ring_put_ptr; X fip->recv_ring_cnt = 0; X fip->xmit_ring_take_ptr = fip->xmit_ring_put_ptr; X fip->xmit_ring_cnt = 0; X X /* hook into the interrupt users chain */ X fip->next_int_user = fas_first_int_user [fip->vec]; X if (fip->next_int_user) X fip->next_int_user->prev_int_user = fip; X fas_first_int_user [fip->vec] = fip; X fip->prev_int_user = (struct fas_info *) NULL; X X fip->lcr = 0; X fas_first_outb (fip, LINE_CTL_PORT, fip->lcr); X X /* clear and disable FIFOs */ X if (fip->device_flags.i & DF_DEVICE_IS_NS16550A) X fas_outb (fip, NS_FIFO_CTL_PORT, NS_FIFO_CLEAR_CMD); X else if (fip->device_flags.i & DF_DEVICE_IS_I82510) X { X fas_outb (fip, I_BANK_PORT, I_BANK_1); X fas_outb (fip, I_TCM_PORT, I_FIFO_CLR_XMIT); X fas_outb (fip, I_RCM_PORT, I_FIFO_CLR_RECV); X fas_outb (fip, I_BANK_PORT, I_BANK_2); X fas_outb (fip, I_IDM_PORT, I_FIFO_CLEAR_CMD); X fas_outb (fip, I_BANK_PORT, I_BANK_0); X } X X /* clear interrupts */ X (void) fas_inb (fip, MDM_STATUS_PORT); X (void) fas_inb (fip, RCV_DATA_PORT); X (void) fas_inb (fip, RCV_DATA_PORT); X (void) fas_inb (fip, LINE_STATUS_PORT); X (void) fas_inb (fip, INT_ID_PORT); X X /* enable FIFOs */ X if (fip->device_flags.i & DF_DEVICE_IS_NS16550A) X fas_outb (fip, NS_FIFO_CTL_PORT, NS_FIFO_SETUP_CMD); X else if (fip->device_flags.i & DF_DEVICE_IS_I82510) X { X fas_outb (fip, I_BANK_PORT, I_BANK_2); X fas_outb (fip, I_IDM_PORT, I_FIFO_SETUP_CMD); X fas_outb (fip, I_BANK_PORT, I_BANK_0); X } X X fip->msi_cnt = 0; X fip->msr = fip->new_msr = fas_inb (fip, MDM_STATUS_PORT) X & (MS_CTS_PRESENT X | MS_DSR_PRESENT X | MS_DCD_PRESENT); X X fip->ier = IE_INIT_MODE; /* enable UART interrupts */ X fas_outb (fip, INT_ENABLE_PORT, fip->ier); X Xsetmcr: X /* set up modem and flow control lines */ X fip->mcr &= ~(fip->modem.m.di X | fip->modem.m.ei X | fip->modem.m.eo X | fip->flow.m.ic X | fip->flow.m.hc); X X fip->mcr |= (fip->o_state & OS_WAIT_OPEN) X ? fip->modem.m.ei X : fip->modem.m.eo; X X if (fip->o_state & OS_HWI_HANDSHAKE) X fip->mcr |= fip->flow.m.ic; X else if (!(fip->o_state & OS_HDX_HANDSHAKE)) X { X fip->flow_flags.s |= FF_HDX_STARTED; X fip->mcr |= fip->flow.m.hc; X } X X fas_outb (fip, MDM_CTL_PORT, fip->mcr); X X fip->device_flags.s |= DF_DEVICE_OPEN | DF_MODEM_ENABLED; X} X X/* close device physically */ Xstatic void Xfas_close_device (fip) Xregister struct fas_info *fip; X{ X REGVAR; X X fip->device_flags.s &= ~DF_DEVICE_OPEN; X X fip->ier = IE_NONE; /* disable UART interrupts */ X fas_first_outb (fip, INT_ENABLE_PORT, fip->ier); X X /* drop flow control lines */ X fip->mcr &= (fip->o_state & OS_HWI_HANDSHAKE) X ? ~fip->flow.m.ic X : ~fip->flow.m.hc; X fas_outb (fip, MDM_CTL_PORT, fip->mcr); X X /* clear and disable FIFOs */ X if (fip->device_flags.i & DF_DEVICE_IS_NS16550A) X fas_outb (fip, NS_FIFO_CTL_PORT, NS_FIFO_CLEAR_CMD); X else if (fip->device_flags.i & DF_DEVICE_IS_I82510) X { X fas_outb (fip, I_BANK_PORT, I_BANK_1); X fas_outb (fip, I_TCM_PORT, I_FIFO_CLR_XMIT); X fas_outb (fip, I_RCM_PORT, I_FIFO_CLR_RECV); X fas_outb (fip, I_BANK_PORT, I_BANK_2); X fas_outb (fip, I_IDM_PORT, I_FIFO_CLEAR_CMD); X fas_outb (fip, I_BANK_PORT, I_BANK_0); X } X X /* reset break level */ X fip->lcr &= ~LC_SET_BREAK_LEVEL; X fas_outb (fip, LINE_CTL_PORT, fip->lcr); X X /* unhook from interrupt users chain */ X if (fip->prev_int_user) X fip->prev_int_user->next_int_user = fip->next_int_user; X else X fas_first_int_user [fip->vec] = fip->next_int_user; X if (fip->next_int_user) X fip->next_int_user->prev_int_user = fip->prev_int_user; X X if ((fip->cflag & HUPCL) X || !(fip->device_flags.i & DF_DEVICE_CONFIGURED)) X { X /* request hangup */ X fip->device_flags.s |= DF_DO_HANGUP; X (void) timeout (fas_hangup, fip, (HANGUP_DELAY) * (HZ) / 1000); X } X} X X/* compute the port access control value */ Xstatic uint Xfas_make_ctl_val (fip, unit, num) Xregister struct fas_info *fip; Xuint unit; Xuint num; X{ X register uint mask, val; X uint i; X X if (fip->device_flags.i & DF_CTL_FIRST) X return (fas_ctl_val [unit]); X X if (fip->device_flags.i & DF_CTL_EVERY) X { X for (i = 0, mask = fas_ctl_val [unit], X val = fas_ctl_val [unit] << 8; i < 8; i++) X { X if (mask & 0x100) X { X if (num & 0x01) X val ^= 0x100; X num >>= 1; X } X mask >>= 1; X val >>= 1; X } X return (val); X } X return (0); X} X X/* test device thoroughly */ Xstatic int Xfas_test_device (fip) Xregister struct fas_info *fip; X{ X register unchar *cptr; X int done; X uint delay_count, i; X static uint lcrval [3] = X { X LC_WORDLEN_8, X LC_WORDLEN_8 | LC_ENABLE_PARITY, X LC_WORDLEN_8 | LC_ENABLE_PARITY | LC_EVEN_PARITY X }; X REGVAR; X X /* make sure FIFO is off */ X fas_first_outb (fip, NS_FIFO_CTL_PORT, NS_FIFO_CLEAR_CMD); X fas_outb (fip, I_BANK_PORT, I_BANK_2); X fas_outb (fip, I_IDM_PORT, I_FIFO_CLEAR_CMD); X fas_outb (fip, I_BANK_PORT, I_BANK_0); X X /* set counter divisor */ X fas_outb (fip, LINE_CTL_PORT, LC_ENABLE_DIVISOR); X fas_outb (fip, DIVISOR_LSB_PORT, fas_speeds [B38400]); X fas_outb (fip, DIVISOR_MSB_PORT, fas_speeds [B38400] >> 8); X fas_outb (fip, LINE_CTL_PORT, 0); X X /* switch to local loopback */ X fas_outb (fip, MDM_CTL_PORT, MC_SET_LOOPBACK); X X done = 0; X X /* wait until the transmitter register is empty */ X for (delay_count = 20000; X delay_count && (~fas_inb (fip, LINE_STATUS_PORT) X & (LS_XMIT_AVAIL | LS_XMIT_COMPLETE)); X delay_count--) X ; X X if (!delay_count) X done = 1; X X if (!done) X { X /* clear flags */ X (void) fas_inb (fip, RCV_DATA_PORT); X (void) fas_inb (fip, RCV_DATA_PORT); X (void) fas_inb (fip, LINE_STATUS_PORT); X X /* make sure there are no more characters in the X receiver register X */ X for (delay_count = 20000; X delay_count && !(fas_inb (fip, LINE_STATUS_PORT) & LS_RCV_AVAIL); X delay_count--) X ; X X if (delay_count) X (void) fas_inb (fip, RCV_DATA_PORT); X X /* test pattern */ X cptr = (unchar *) "\ X\377\125\252\045\244\0\ X\377\125\252\045\244\0\ X\377\125\252\045\244\0\ X\377\125\252\045\244\0\ X\377\125\252\045\244\0\0"; X X do X { X for (i = 0; i < 3; i++) X { X /* test transmitter and receiver X with different line settings X */ X fas_outb (fip, LINE_CTL_PORT, lcrval [i]); X X /* wait until the transmitter register X is empty X */ X for (delay_count = 20000; X delay_count && (~fas_inb (fip, LINE_STATUS_PORT) X & (LS_XMIT_AVAIL X | LS_XMIT_COMPLETE)); X delay_count--) X ; X X if (!delay_count) X { X done = 2; X break; X } X X /* send test pattern */ X fas_outb (fip, XMT_DATA_PORT, *cptr); X X /* wait until the test pattern is received */ X for (delay_count = 20000; X delay_count && ((fas_inb (fip, LINE_STATUS_PORT) X & LS_RCV_INT) X != LS_RCV_AVAIL); X delay_count--) X ; X X if (!delay_count) X { X done = 3; X break; X } X X /* check test pattern */ X if (fas_inb (fip, RCV_DATA_PORT) != *cptr) X { X done = 4; X break; X } X } X X if (done) X break; X } while (*((ushort *) cptr++)); X } X X if (!done) X { X /* wait until the transmitter register is empty */ X for (delay_count = 20000; X delay_count && (~fas_inb (fip, LINE_STATUS_PORT) X & (LS_XMIT_AVAIL | LS_XMIT_COMPLETE)); X delay_count--) X ; X X if (!delay_count) X done = 5; X } X X if (!done) X { X /* test pattern */ X cptr = (unchar *) "\ X\005\142\012\237\006\130\011\257\017\361\0\017\ X\005\142\012\237\006\130\011\257\017\361\0\017\ X\005\142\012\237\006\130\011\257\017\361\0\017\ X\005\142\012\237\006\130\011\257\017\361\0\017\ X\005\142\012\237\006\130\011\257\017\361\0\017\0\0"; X X /* clear delta bits */ X (void) fas_inb (fip, MDM_STATUS_PORT); X X do X { X /* test modem control and status lines */ X fas_outb (fip, MDM_CTL_PORT, *cptr | MC_SET_LOOPBACK); X if (fas_inb (fip, MDM_STATUS_PORT) != *(cptr + 1)) X { X done = 6; X break; X } X } while (*((ushort *) cptr)++); X } X X /* switch back to normal operation */ X fas_outb (fip, MDM_CTL_PORT, 0); X X return (done); X} X X#if defined (NEED_PUT_GETCHAR) X Xint Xasyputchar (arg1) Xunchar arg1; X{ X register struct fas_info *fip; X REGVAR; X X if (!fas_is_initted) X (void) fasinit (); X X fip = &fas_info [0]; X if (fip->device_flags.i & DF_DEVICE_CONFIGURED) X { X fas_ctl (fip, LINE_STATUS_PORT); X while (!(inb (LINE_STATUS_PORT.addr) & LS_XMIT_AVAIL)) X ; X fas_outb (fip, XMT_DATA_PORT, arg1); X if (arg1 == 10) X (void) asyputchar (13); X } X return (0); X} X Xint Xasygetchar () X{ X register struct fas_info *fip; X REGVAR; X X if (!fas_is_initted) X (void) fasinit (); X X fip = &fas_info [0]; X if ((fip->device_flags.i & DF_DEVICE_CONFIGURED) X && (fas_first_inb (fip, LINE_STATUS_PORT) & LS_RCV_AVAIL)) X return (fas_inb (fip, RCV_DATA_PORT)); X else X return (-1); X} X#endif X X#if defined (NEED_INIT8250) X X/* reset the requested port to be used directly by a DOS process */ Xint Xinit8250 (port, ier) Xushort port, ier; /* ier not used in this stub */ X{ X register struct fas_info *fip; X register uint physical_unit; X int old_level; X REGVAR; X X /* See if the port address matches a port that is used by X the fas driver. X */ X for (physical_unit = 0; physical_unit < fas_physical_units; X physical_unit++) X if (port == (ushort) (fas_port [physical_unit])) X break; X X if (physical_unit >= fas_physical_units) X return (-1); /* port didn't match */ X X fip = fas_info_ptr [physical_unit]; X X old_level = SPLINT (); X X fip->ier = IE_NONE; X fas_first_outb (fip, INT_ENABLE_PORT, fip->ier); X X fip->mcr &= ~(fip->flow.m.ic | fip->flow.m.hc); X fas_outb (fip, MDM_CTL_PORT, fip->mcr); X X if (fip->device_flags.i & DF_DEVICE_IS_NS16550A) X fas_outb (fip, NS_FIFO_CTL_PORT, NS_FIFO_CLEAR_CMD); X else if (fip->device_flags.i & DF_DEVICE_IS_I82510) X { X fas_outb (fip, I_BANK_PORT, I_BANK_1); X fas_outb (fip, I_TCM_PORT, I_FIFO_CLR_XMIT); X fas_outb (fip, I_RCM_PORT, I_FIFO_CLR_RECV); X fas_outb (fip, I_BANK_PORT, I_BANK_2); X fas_outb (fip, I_IDM_PORT, I_FIFO_CLEAR_CMD); X fas_outb (fip, I_BANK_PORT, I_BANK_0); X } X X (void) fas_inb (fip, MDM_STATUS_PORT); X (void) fas_inb (fip, RCV_DATA_PORT); X (void) fas_inb (fip, RCV_DATA_PORT); X (void) fas_inb (fip, LINE_STATUS_PORT); X (void) fas_inb (fip, INT_ID_PORT); X (void) splx (old_level); X return (0); X} X#endif SHAR_EOF echo 'File fasi/fas.c is complete' && $TOUCH -am 0725125791 'fasi/fas.c' && chmod 0644 fasi/fas.c || echo 'restore of fasi/fas.c failed' Wc_c="`wc -c < 'fasi/fas.c'`" test 81145 -eq "$Wc_c" || echo 'fasi/fas.c: original size 81145, current size' "$Wc_c" rm -f _shar_wnt_.tmp fi # ============= fasi/idfasi ============== if test -f 'fasi/idfasi' -a X"$1" != X"-c"; then echo 'x - skipping fasi/idfasi (File already exists)' rm -f _shar_wnt_.tmp else > _shar_wnt_.tmp echo 'x - extracting fasi/idfasi (Text)' sed 's/^X//' << 'SHAR_EOF' > 'fasi/idfasi' && X: X#+--------------------------------------------------------------- X# idefas - ECU FASI/FAS Installation X# Alas, SCO idinstall has no -z (Define) option like ISC does X#---------------------------------------------------------------- X/etc/conf/bin/idcheck -p fas Xif [ $? -lt 16 ] ; then X /etc/conf/bin/idinstall -a -e -k fas Xelse X /etc/conf/bin/idinstall -u -e -k fas Xfi SHAR_EOF $TOUCH -am 0429171591 'fasi/idfasi' && chmod 0744 fasi/idfasi || echo 'restore of fasi/idfasi failed' Wc_c="`wc -c < 'fasi/idfasi'`" test 370 -eq "$Wc_c" || echo 'fasi/idfasi: original size 370, current size' "$Wc_c" rm -f _shar_wnt_.tmp fi # ============= ecufriend/ecufriend.c ============== if test -f 'ecufriend/ecufriend.c' -a X"$1" != X"-c"; then echo 'x - skipping ecufriend/ecufriend.c (File already exists)' rm -f _shar_wnt_.tmp else > _shar_wnt_.tmp echo 'x - extracting ecufriend/ecufriend.c (Text)' sed 's/^X//' << 'SHAR_EOF' > 'ecufriend/ecufriend.c' && X#define DUMP_SCREEN X/*+------------------------------------------------------------------------- X ecufriend.c -- example of using ecu shared memory access X wht@n4hgf.Mt-Park.GA.US X XExecute by ecu procedure command: system -s 'ecufriend '+%itos(%shmid) XTo manually execute for perusal, do an ipcs command to find the Xshared memory id or HOME pc echo 'shmid='+%itos(%shmid) XThen HOME >ecufriend # where # is replaced by the shmid X--------------------------------------------------------------------------*/ X/*+:EDITS:*/ X/*:07-25-1991-12:56-wht@n4hgf-ECU release 3.10 */ X/*:08-14-1990-20:40-wht@n4hgf-ecu3.00-flush old edit history */ X X#include <stdio.h> X#include <signal.h> X#include <termio.h> X#include <sys/errno.h> X#include <sys/types.h> X#include <sys/stat.h> X#include <time.h> X#include <sys/ipc.h> X#include <sys/msg.h> X#include <sys/shm.h> X#include "../ecushm.h" X XECU_SDS FAR *shm; /* shared segment pointer */ Xint shmid; /* sharged segment id */ X X/*+------------------------------------------------------------------------- X main(argc,argv,envp) X--------------------------------------------------------------------------*/ Xmain(argc,argv,envp) Xint argc; Xchar **argv; Xchar **envp; X{ Xregister itmp; X#ifdef DUMP_SCREEN Xint row,col; Xunsigned char sch; X#endif X X if(argc < 2) X { X printf("usage: ecufriend <ecu-shmid>\n"); X exit(255); X } X shmid = atoi(argv[1]); X X if((shm = (ECU_SDS FAR *)shmat(shmid,(char FAR *)0,SHM_RDONLY)) X == (ECU_SDS FAR *)-1) X { X perror("shmat"); X exit(1); X } X X printf("ecu shm address = %08lx shmid=%d revision=%08lx\n", X shm,shmid,shm->shm_revision); X X if(shm->shm_revision != SHM_REV) X { X printf("incompatible shared memory revision (compiled with %08lx)\n", X SHM_REV); X exit(1); X } X X printf("xmit chars=%lu rcvd chars=%lu\n", X shm->xmit_chars,shm->rcvd_chars); X printf("The receive cursor position is at column %d row %d\n", X shm->cursor_y,shm->cursor_x); X X printf("If this program was not executed by a shell that closed it,\n"); X printf("then fd %d is available to us to write and read from the line.\n", X shm->Liofd); X X if(isatty(shm->Liofd)) X printf("It is available.\n"); X else X printf("It is not available. Even so, we could re-open %s here\n", X shm->Lline); X X if(shm->Lmodem_off_hook) X printf("Hmmm.. we seem to be connected to %s at %s\n", X shm->Ldescr,shm->Ltelno); X X#ifdef DUMP_SCREEN X printf("screen dump\n"); X printf("-----------\n"); X for(row = 0; row < 43; row++) X { X for(col = 0; col < 79; col++) X { X sch = shm->screen[row][col]; X if((sch < 0x20) && (sch > 0x7E)) X putc('.',stdout); X else X putc(sch,stdout); X } X putc('\n',stdout); X } X#endif X X exit(0); X} /* end of main */ X X/* vi: set tabstop=4 shiftwidth=4: */ X/* end of ecufriend.c */ SHAR_EOF $TOUCH -am 0725125691 'ecufriend/ecufriend.c' && chmod 0644 ecufriend/ecufriend.c || echo 'restore of ecufriend/ecufriend.c failed' Wc_c="`wc -c < 'ecufriend/ecufriend.c'`" test 2718 -eq "$Wc_c" || echo 'ecufriend/ecufriend.c: original size 2718, current size' "$Wc_c" rm -f _shar_wnt_.tmp fi # ============= mapkey/README ============== if test ! -d 'mapkey'; then echo 'x - creating directory mapkey' mkdir 'mapkey' fi if test -f 'mapkey/README' -a X"$1" != X"-c"; then echo 'x - skipping mapkey/README (File already exists)' rm -f _shar_wnt_.tmp else > _shar_wnt_.tmp echo 'x - extracting mapkey/README (Text)' sed 's/^X//' << 'SHAR_EOF' > 'mapkey/README' && X X#+:EDITS: X#:05-02-1991-01:57-wht@n4hgf-alt-[a-z] range moved from 0x80-0x99 to 0xe0-0xf9 X XThis file contains information necessary to map ALT-A through ALT-Z Xin accordance with ecuxkey.h to produce unique codes so that XALT-[a-z] can cause ECU to execute procedures with a single keystroke. X XBeginning with ECU 3.10, the key code range changed: X 128 through 153 (0x80 through 0x99) to X 229 through 249 (0xE0 through 0xF9) X XModify your /usr/lib/keyboard/keys value for the ALT values for Xkey codes matching keys [a-z] as follows. If you have made no Xother changes to your key file, use the supplied keys.usa.ecu X XMy apologies to those caught by having already done something Xsimilar for EMACS or CRISP. X XThese are the necessary differences: X X ALT-unshifted X | X V X 16 'q' 'Q' dc1 dc1 0xf0 'Q' dc1 dc1 C X 17 'w' 'W' etb etb 0xf6 'W' etb etb C X 18 'e' 'E' enq enq 0xe4 'E' enq enq C X 19 'r' 'R' dc2 dc2 0xf1 'R' dc2 dc2 C X 20 't' 'T' dc4 dc4 0xf3 'T' dc4 dc4 C X 21 'y' 'Y' em em 0xf8 'Y' em em C X 22 'u' 'U' nak nak 0xf4 'U' nak nak C X 23 'i' 'I' ht ht 0xe8 'I' ht ht C X 24 'o' 'O' si si 0xee 'O' si si C X 25 'p' 'P' dle dle 0xef 'P' dle dle C X 30 'a' 'A' soh soh 0xe0 'A' soh soh C X 31 's' 'S' dc3 dc3 0xf2 'S' dc3 dc3 C X 32 'd' 'D' eot eot 0xe3 'D' eot eot C X 33 'f' 'F' ack ack 0xe5 'F' ack ack C X 34 'g' 'G' bel bel 0xe6 'G' bel bel C X 35 'h' 'H' bs bs 0xe7 'H' bs bs C X 36 'j' 'J' nl nl 0xe9 'J' nl nl C X 37 'k' 'K' vt vt 0xea 'K' vt vt C X 38 'l' 'L' np np 0xeb 'L' np np C X 44 'z' 'Z' sub sub 0xf9 'Z' sub sub C X 45 'x' 'X' can can 0xf7 'X' can can C X 46 'c' 'C' etx etx 0xe2 'C' etx etx C X 47 'v' 'V' syn syn 0xf5 'V' syn syn C X 48 'b' 'B' stx stx 0xe1 'B' stx stx C X 49 'n' 'N' so so 0xed 'N' so so C X 50 'm' 'M' cr cr 0xec 'M' cr cr C X SHAR_EOF $TOUCH -am 0502022691 'mapkey/README' && chmod 0644 mapkey/README || echo 'restore of mapkey/README failed' Wc_c="`wc -c < 'mapkey/README'`" test 2624 -eq "$Wc_c" || echo 'mapkey/README: original size 2624, current size' "$Wc_c" rm -f _shar_wnt_.tmp fi # ============= mapkey/keys.usa.ecu ============== if test -f 'mapkey/keys.usa.ecu' -a X"$1" != X"-c"; then echo 'x - skipping mapkey/keys.usa.ecu (File already exists)' rm -f _shar_wnt_.tmp else > _shar_wnt_.tmp echo 'x - extracting mapkey/keys.usa.ecu (Text)' sed 's/^X//' << 'SHAR_EOF' > 'mapkey/keys.usa.ecu' && X#+---------------------------------------------------------------------------- X# keys.usa.ecu X# SCO keys file for ECU alt-[a-z] support X#----------------------------------------------------------------------------- X#+:EDITS: X#:05-02-1991-01:57-wht@n4hgf-alt-[a-z] range moved from 0x80-0x99 to 0xe0-0xf9 X X# scan cntrl alt alt cntrl lock X# code base shift cntrl shift alt shift cntrl shift state X 0 nop nop nop nop nop nop nop nop O X 1 esc esc esc esc esc esc esc esc O X 2 '1' '!' nop nop '1' '!' nop nop O X 3 '2' '@' nul nul '2' '@' nul nul O X 4 '3' '#' nop nop '3' '#' nop nop O X 5 '4' '$' nop nop '4' '$' nop nop O X 6 '5' '%' nop nop '5' '%' nop nop O X 7 '6' '^' rs rs '6' '^' rs rs O X 8 '7' '&' nop nop '7' '&' nop nop O X 9 '8' '*' nop nop '8' '*' nop nop O X 10 '9' '(' nop nop '9' '(' nop nop O X 11 '0' ')' nop nop '0' ')' nop nop O X 12 '-' '_' ns ns '-' '_' ns ns O X 13 '=' '+' nop nop '=' '+' nop nop O X 14 bs bs del del bs bs del del O X 15 ht btab nop nop ht btab nop nop O X 16 'q' 'Q' dc1 dc1 0xf0 'Q' dc1 dc1 C X 17 'w' 'W' etb etb 0xf6 'W' etb etb C X 18 'e' 'E' enq enq 0xe4 'E' enq enq C X 19 'r' 'R' dc2 dc2 0xf1 'R' dc2 dc2 C X 20 't' 'T' dc4 dc4 0xf3 'T' dc4 dc4 C X 21 'y' 'Y' em em 0xf8 'Y' em em C X 22 'u' 'U' nak nak 0xf4 'U' nak nak C X 23 'i' 'I' ht ht 0xe8 'I' ht ht C X 24 'o' 'O' si si 0xee 'O' si si C X 25 'p' 'P' dle dle 0xef 'P' dle dle C X 26 '[' '{' esc esc '[' '{' esc esc O X 27 ']' '}' gs gs ']' '}' gs gs O X 28 cr cr nl nl cr cr nl nl O X 29 lctrl lctrl lctrl lctrl lctrl lctrl lctrl lctrl O X 30 'a' 'A' soh soh 0xe0 'A' soh soh C X 31 's' 'S' dc3 dc3 0xf2 'S' dc3 dc3 C X 32 'd' 'D' eot eot 0xe3 'D' eot eot C X 33 'f' 'F' ack ack 0xe5 'F' ack ack C X 34 'g' 'G' bel bel 0xe6 'G' bel bel C X 35 'h' 'H' bs bs 0xe7 'H' bs bs C X 36 'j' 'J' nl nl 0xe9 'J' nl nl C X 37 'k' 'K' vt vt 0xea 'K' vt vt C X 38 'l' 'L' np np 0xeb 'L' np np C X 39 ';' ':' nop nop ';' ':' nop nop O X 40 '\'' '"' nop nop '\'' '"' nop nop O X 41 '`' '~' nop nop '`' '~' nop nop O X 42 lshift lshift lshift lshift lshift lshift lshift lshift O X 43 '\\' '|' fs fs '\\' '|' fs fs O X 44 'z' 'Z' sub sub 0xf9 'Z' sub sub C X 45 'x' 'X' can can 0xf7 'X' can can C X 46 'c' 'C' etx etx 0xe2 'C' etx etx C X 47 'v' 'V' syn syn 0xf5 'V' syn syn C X 48 'b' 'B' stx stx 0xe1 'B' stx stx C X 49 'n' 'N' so so 0xed 'N' so so C X 50 'm' 'M' cr cr 0xec 'M' cr cr C X 51 ',' '<' nop nop ',' '<' nop nop O X 52 '.' '>' nop nop '.' '>' nop nop O X 53 '/' '?' nop nop '/' '?' nop nop O X 54 rshift rshift rshift rshift rshift rshift rshift rshift O X 55 '*' '*' nscr nscr '*' '*' nscr nscr O X 56 lalt lalt lalt lalt lalt lalt lalt lalt O X 57 ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' O X 58 clock clock clock clock clock clock clock clock O X 59 fkey1 fkey13 fkey25 fkey37 scr1 scr11 scr1 scr11 O X 60 fkey2 fkey14 fkey26 fkey38 scr2 scr12 scr2 scr12 O X 61 fkey3 fkey15 fkey27 fkey39 scr3 scr13 scr3 scr13 O X 62 fkey4 fkey16 fkey28 fkey40 scr4 scr14 scr4 scr14 O X 63 fkey5 fkey17 fkey29 fkey41 scr5 scr15 scr5 scr15 O X 64 fkey6 fkey18 fkey30 fkey42 scr6 scr16 scr6 scr16 O X 65 fkey7 fkey19 fkey31 fkey43 scr7 scr7 scr7 scr7 O X 66 fkey8 fkey20 fkey32 fkey44 scr8 scr8 scr8 scr8 O X 67 fkey9 fkey21 fkey33 fkey45 scr9 scr9 scr9 scr9 O X 68 fkey10 fkey22 fkey34 fkey46 scr10 scr10 scr10 scr10 O X 69 nlock nlock dc3 dc3 nlock nlock dc3 dc3 O X 70 slock slock del del slock slock del del O X 71 fkey49 '7' '7' '7' '7' '7' '7' '7' N X 72 fkey50 '8' '8' '8' '8' '8' '8' '8' N X 73 fkey51 '9' '9' '9' '9' '9' '9' '9' N X 74 fkey52 '-' '-' '-' '-' '-' '-' '-' N X 75 fkey53 '4' '4' '4' '4' '4' '4' '4' N X 76 fkey54 '5' '5' '5' '5' '5' '5' '5' N X 77 fkey55 '6' '6' '6' '6' '6' '6' '6' N X 78 fkey56 '+' '+' '+' '+' '+' '+' '+' N X 79 fkey57 '1' '1' '1' '1' '1' '1' '1' N X 80 fkey58 '2' '2' '2' '2' '2' '2' '2' N X 81 fkey59 '3' '3' '3' '3' '3' '3' '3' N X 82 fkey60 '0' '0' '0' '0' '0' '0' '0' N X 83 del '.' del del del del del del N X 84 0x1f 0x1f 0x1f 0x1f 0x1f 0x1f 0x1f 0x1f O X 85 nop nop nop nop nop nop nop nop O X 86 nop nop nop nop nop nop nop nop O X 87 fkey11 fkey23 fkey35 fkey47 scr11 scr11 scr11 scr11 O X 88 fkey12 fkey24 fkey36 fkey48 scr12 scr12 scr12 scr12 O X 89 nop nop nop nop nop nop nop nop O X 90 nop nop nop nop nop nop nop nop O X 91 nop nop nop nop nop nop nop nop O X 92 nop nop nop nop nop nop nop nop O X 93 nop nop nop nop nop nop nop nop O X 94 nop nop nop nop nop nop nop nop O X 95 nop nop nop nop nop nop nop nop O X 96 fkey50 fkey50 fkey50 fkey50 fkey50 fkey50 fkey50 fkey50 O X 97 fkey53 fkey53 fkey53 fkey53 fkey53 fkey53 fkey53 fkey53 O X 98 fkey58 fkey58 fkey58 fkey58 fkey58 fkey58 fkey58 fkey58 O X 99 fkey55 fkey55 fkey55 fkey55 fkey55 fkey55 fkey55 fkey55 O X 100 fkey49 fkey49 fkey49 fkey49 fkey49 fkey49 fkey49 fkey49 O X 102 fkey57 fkey57 fkey57 fkey57 fkey57 fkey57 fkey57 fkey57 O X 103 fkey59 fkey59 fkey59 fkey59 fkey59 fkey59 fkey59 fkey59 O X 104 fkey60 fkey60 fkey60 fkey60 fkey60 fkey60 fkey60 fkey60 O X 105 del del del del del del del del N X 106 fkey54 fkey54 fkey54 fkey54 fkey54 fkey54 fkey54 fkey54 O X 107 nop nop nop nop nop nop nop nop O X 108 nop nop nop nop nop nop nop nop O X 109 nop nop nop nop nop nop nop nop O X 110 nop nop nop nop nop nop nop nop O X 111 fkey51 fkey51 fkey51 fkey51 fkey51 fkey51 fkey51 fkey51 O X 111 nop nop nop nop nop nop nop nop O X 112 nop nop nop nop nop nop nop nop O X 113 nop nop nop nop nop nop nop nop O X 114 nop nop nop nop nop nop nop nop O X 116 nop nop nop nop nop nop nop nop O X 117 nop nop nop nop nop nop nop nop O X 118 nop nop nop nop nop nop nop nop O X 119 nop nop nop nop nop nop nop nop O X 120 nop nop nop nop nop nop nop nop O X 121 nop nop nop nop nop nop nop nop O X 122 nop nop nop nop nop nop nop nop O X 123 nop nop nop nop nop nop nop nop O X 124 nop nop nop nop nop nop nop nop O X 125 nop nop nop nop nop nop nop nop O X 126 nop nop nop nop nop nop nop nop O X 127 nop nop nop nop nop nop nop nop O X 128 rctrl rctrl rctrl rctrl rctrl rctrl rctrl rctrl O X 129 ralt ralt ralt ralt ralt ralt ralt ralt O X 130 fkey60 fkey60 fkey60 fkey60 fkey60 fkey60 fkey60 fkey60 O X 131 del del del del del del del del N X 132 fkey49 fkey49 fkey49 fkey49 fkey49 fkey49 fkey49 fkey49 O X 133 fkey57 fkey57 fkey57 fkey57 fkey57 fkey57 fkey57 fkey57 O X 134 fkey51 fkey51 fkey51 fkey51 fkey51 fkey51 fkey51 fkey51 O X 135 fkey59 fkey59 fkey59 fkey59 fkey59 fkey59 fkey59 fkey59 O X 136 fkey55 fkey55 fkey55 fkey55 fkey55 fkey55 fkey55 fkey55 O X 137 fkey53 fkey53 fkey53 fkey53 fkey53 fkey53 fkey53 fkey53 O X 138 fkey50 fkey50 fkey50 fkey50 fkey50 fkey50 fkey50 fkey50 O X 139 fkey58 fkey58 fkey58 fkey58 fkey58 fkey58 fkey58 fkey58 O X 140 '/' nop nop nop '/' nop nop nop O X 141 cr cr nl nl cr cr nl nl O SHAR_EOF $TOUCH -am 0502021091 'mapkey/keys.usa.ecu' && chmod 0644 mapkey/keys.usa.ecu || echo 'restore of mapkey/keys.usa.ecu failed' Wc_c="`wc -c < 'mapkey/keys.usa.ecu'`" test 9889 -eq "$Wc_c" || echo 'mapkey/keys.usa.ecu: original size 9889, current size' "$Wc_c" rm -f _shar_wnt_.tmp fi # ============= xsel386/fixttiocom.c ============== if test ! -d 'xsel386'; then echo 'x - creating directory xsel386' mkdir 'xsel386' fi if test -f 'xsel386/fixttiocom.c' -a X"$1" != X"-c"; then echo 'x - skipping xsel386/fixttiocom.c (File already exists)' rm -f _shar_wnt_.tmp else > _shar_wnt_.tmp echo 'x - extracting xsel386/fixttiocom.c (Text)' sed 's/^X//' << 'SHAR_EOF' > 'xsel386/fixttiocom.c' && X/*+------------------------------------------------------------------------- X fixttiocom.c - change ttiocom to Ttiocom calls in /usr/sys/sys/libsys.a XThis program patched my Xenix 386 2.3.1 system library (a copy of which Xhad been named libfix.a, fixed, verified, then moved to libsys.a) X--------------------------------------------------------------------------*/ X/*+:EDITS:*/ X/*:07-25-1991-12:59-wht@n4hgf-ECU release 3.10 */ X/*:08-14-1990-20:40-wht@n4hgf-ecu3.00-flush old edit history */ X X#include <stdio.h> X#include <sys/types.h> X#include <fcntl.h> X Xchar *lib = "libfix.a"; X X/* file positions where names needed changing */ X#define PLACE1 0xdcaL X#define PLACE2 0x1b1cbL X#define PLACE3 0x1c41bL X X/*+------------------------------------------------------------------------- X main(argc,argv,envp) X--------------------------------------------------------------------------*/ Xmain(argc,argv,envp) Xint argc; Xchar **argv; Xchar **envp; X{ Xint fd = open(lib,O_RDWR,0); Xunsigned char ch1,ch2,ch3; Xlong lseek(); X X if(fd < 0) X { X perror(lib); X exit(9); X } X X if(lseek(fd,PLACE1,0) != PLACE1) X { X perror("seek1"); X exit(1); X } X if(read(fd,&ch1,1) != 1) X { X perror("read1"); X exit(1); X } X printf("char 1 = %02x\n",ch1); X X if(lseek(fd,PLACE2,0) != PLACE2) X { X perror("seek2"); X exit(2); X } X if(read(fd,&ch2,2) != 2) X { X perror("read2"); X exit(2); X } X printf("char 2 = %02x\n",ch2); X X X if(lseek(fd,PLACE3,0) != PLACE3) X { X perror("seek3"); X exit(3); X } X if(read(fd,&ch3,1) != 1) X { X perror("read3"); X exit(3); X } X printf("char 3 = %02x\n",ch3); X X if((ch1 != 't') || (ch2 != 't') || (ch3 != 't')) X exit(8); X if(lseek(fd,PLACE1,0) != PLACE1) X { X perror("seek1"); X exit(1); X } X write(fd,"T",1); X if(lseek(fd,PLACE2,0) != PLACE2) X { X perror("seek1"); X exit(1); X } X write(fd,"T",1); X if(lseek(fd,PLACE3,0) != PLACE3) X { X perror("seek1"); X exit(1); X } X write(fd,"T",1); X printf("done\n"); X close(fd); X X exit(0); X} /* end of main */ X X/* vi: set tabstop=4 shiftwidth=4: */ X/* end of fixttiocom.c */ SHAR_EOF $TOUCH -am 0725125991 'xsel386/fixttiocom.c' && chmod 0644 xsel386/fixttiocom.c || echo 'restore of xsel386/fixttiocom.c failed' Wc_c="`wc -c < 'xsel386/fixttiocom.c'`" test 1999 -eq "$Wc_c" || echo 'xsel386/fixttiocom.c: original size 1999, current size' "$Wc_c" rm -f _shar_wnt_.tmp fi # ============= xsel386/select-update ============== if test -f 'xsel386/select-update' -a X"$1" != X"-c"; then echo 'x - skipping xsel386/select-update (File already exists)' rm -f _shar_wnt_.tmp else > _shar_wnt_.tmp echo 'x - extracting xsel386/select-update (Text)' sed 's/^X//' << 'SHAR_EOF' > 'xsel386/select-update' && XSubject: Re: Select(S) in Xenix 386 2.3.2 XNewsgroups: comp.unix.xenix XKeywords: select, serial, pipes XReferences: <117@accsys.acc.uu.no> <172@prmmbx.UUCP> X XIn article <172@prmmbx.UUCP>, csch@netcs.UUCP (Clemens Schrimpe) writes: X> ivar@acc.uu.no (Ivar Hosteng) writes: X> <> I have experienced some problems using the select call in Xenix 386 V2.3.2. X> <> It does not seems to detect when a pipe gets ready to been read from. X> This is, because there is no provision to select on pipes! X> Why? The stuff is almost totally ported 1:1 from the Berkeley code and X> in BSD pipes should consist of AF_UNIX sockets, on which you can naturally X> select. X> I was very angry, when I found this out after hours of digging with adb in X> the kernel. But I also tried the same on a SUN under SunOS 4.0 and it doesn't X> work either ... seems to be a common illness ??? X> (I wonder, because the code for that is very simple ... ??? ...) X> X> <> I also X> <> have trouble using select on a serial port. When I do that the input X> <> turns into garbage. This does not occur when I use select on the X> <> multiscreen ttys (tty01-tty12). X> Hehe - we had just the same! X> Here is the solution (thanks to my colleague Stefan Koehler, who took one X> look at my screen, into which I had starred for hours, to find it ...) X> X> Select is implemented by an undocumented ioctl X> (0xFFFF == IOC_SELECT -> [sys/slect.h]) X> which is handled by ttiocom() for all devices using the standard X> SYS-V linediscipline! X> X> The ioctl-routine for the serial devices [sioioctl()] just calls X> ttiocom() [after some undefinable VPIX stuff ???] and X> if it returns NON-ZERO it calls sioparam(), which adjusts certain X> parameters and garbles the output! X> OK so far. Now: The Bug lies in the ttiocom-code within the check X> for IOC_SELECT. After detecting the IOC_SELECT, the ttiocom calls X> the select-code and returns NOTHING, which means that if EAX is X> non-zero (randomly) sioparam() is called and garbles the output. X> X> The Fix: (quick and dirty) X> Write a routine called "ttiocom", which might look like this: X> X> ttiocom(ttyp, com, arg, flag) X> struct tty *ttyp; X> int com, arg, flag; /* there should be better types for this :-) */ X> { X> if (com == IOC_SELECT) X> { X> ttselect(ttyp, flag); X> return(0); /*** THIS IS IMPORTANT ***/ X> } X> return(Ttiocom(ttyp, com ,arg, flag)); X> } X> X> Compile something like this, then use whatever you have (GNU-Emacs is X> great in patching strings in binaries) to patch /usr/sys/sys/libsys.a X> to change the original ttiocom into Ttiocom ! X> Link in your code and -by some magic reason- experience a full blown X> select on your System V / Xenix machine!!! X> X> Have fun playing around with it - X> X> Clemens Schrimpe, netCS Informationstechnik GmbH Berlin X> -- X> UUCP: csch@netcs BITNET: csch@db0tui6.BITNET X> ARPA/NSF: csch@garp.mit.edu PSI: PSI%45300033047::CSCH X> PHONE: +49-30-24 42 37 FAX: +49-30-24 38 00 X> BTX: 0303325016-0003 TELEX: 186672 net d X X SHAR_EOF $TOUCH -am 0429171591 'xsel386/select-update' && chmod 0644 xsel386/select-update || echo 'restore of xsel386/select-update failed' Wc_c="`wc -c < 'xsel386/select-update'`" test 2981 -eq "$Wc_c" || echo 'xsel386/select-update: original size 2981, current size' "$Wc_c" rm -f _shar_wnt_.tmp fi # ============= xsel386/select.asm ============== if test -f 'xsel386/select.asm' -a X"$1" != X"-c"; then echo 'x - skipping xsel386/select.asm (File already exists)' rm -f _shar_wnt_.tmp else > _shar_wnt_.tmp echo 'x - extracting xsel386/select.asm (Text)' sed 's/^X//' << 'SHAR_EOF' > 'xsel386/select.asm' && X; CHK=0x1E37 X;+---------------------------------------------------------- X; select(S) X; X;#include <stdio.h> X;#include <sys/select.h> X;#include <fcntl.h> X; X;main(argc,argv,envp) X;int argc; X;char **argv; X;char **envp; X;{ X;struct timeval t; X;int readfds; X;int fd = open("/dev/null",O_RDONLY,0); X; X; readfds = 1<<fd | 1<<0; X; X; t.tv_sec = 5; X; t.tv_usec = 0; X; X; printf("%d\n",select(32,&readfds,0,0,&t)); X; printf("%08x\n",readfds); X; exit(0); X;} /* end of main */ X; X;----------------------------------------------------------- X X title select X X .386 X XSYSNUM equ 2428h X Xextrn _errno:dword X Xpublic _select X X_TEXT segment dword use32 public 'CODE' X assume cs: _TEXT X_select proc near X mov eax, SYSNUM ; Get system call number. X X ; X ; I don't even pretend to understand masm syntax. I tried X ; the following line (and variations) without any success. X ; X X; call far 7:0 ; Switch to kernel and call SYSNUM. X X ; X ; Don't laugh, it works. X ; X X db 9ah X dw 0,0 X dw 7 X X jb short _cerror ; below == error. X X; xor eax, eax ; zero return value (no error). X ret ; done. X X_cerror: X mov _errno, eax ; Save error code in _errno. X mov eax, -1 ; Return -1 (as error). X ret ; done. X X_select endp X X_TEXT ends X X end X; vi: set tabstop=8 : SHAR_EOF $TOUCH -am 0429171591 'xsel386/select.asm' && chmod 0644 xsel386/select.asm || echo 'restore of xsel386/select.asm failed' Wc_c="`wc -c < 'xsel386/select.asm'`" test 1237 -eq "$Wc_c" || echo 'xsel386/select.asm: original size 1237, current size' "$Wc_c" rm -f _shar_wnt_.tmp fi # ============= xsel386/select.txt ============== if test -f 'xsel386/select.txt' -a X"$1" != X"-c"; then echo 'x - skipping xsel386/select.txt (File already exists)' rm -f _shar_wnt_.tmp else > _shar_wnt_.tmp echo 'x - extracting xsel386/select.txt (Text)' sed 's/^X//' << 'SHAR_EOF' > 'xsel386/select.txt' && XNOTE from ...!gatech!emory!tridom!wht: Xthe following is the mail message I originally received; with Xa little tinkering, i got the select call to behave as advertised Xin the BSD manual (my xenix is 386 2.3). Added it to /lib/386/Slibx.a Xand all is well for me. Good luck. X X XFrom emory!gatech!hubcap!ncrcae!ncr-sd!crash!elgar!ag Thu Feb 2 13:04:07 EST 1989 XArticle 4851 of comp.unix.xenix: XPath: tridom!emory!gatech!hubcap!ncrcae!ncr-sd!crash!elgar!ag X>From: ag@elgar.UUCP (Keith Gabryelski) XNewsgroups: comp.unix.xenix XSubject: select() on SCO XENIX 2.3. XMessage-ID: <38@elgar.UUCP> XDate: 24 Jan 89 04:54:17 GMT XReply-To: ag@elgar.UUCP (Keith Gabryelski) XOrganization: Elgar Corporation, San Diego, CA XLines: 474 X XA few days ago I was paging through my SCO XENIX 2.3.1 Release Notes Xand found, on page 44 (section 16), a section describing 4BSD Xenhancements to the current release of SCO XENIX. X Xselect(S) was mentioned specifically. X XI checked the rest of the 2.3 manuals to see if there was a clue on Xhow to access select(); no dice. I tried my 2.2 dev sys libraries to Xsee if it had been supported in previous releases and just not Xmentioned; negative. X XI decided to see if I could get select() to work on my system. And Xthat is what this article is about. X XI checked /xenix and found: X X % nm xenix | grep select X nm: xenix: too many symbols to sort # chuckle X 0020:00015bec T _select X XBingo! I also found <sys/select.h> (which has a comment about Xthe select(2) system call. :-) ). X XWhen a system call is made in a C program on a Unix system (eg Xopen(2)), it actually links in a file from libc.a (/lib/libc.a) (in Xthis case `open.o') written in assembly that loads a register with a Xsystem call number and causes an exception to occur. The `trap' Xinstruction is used on the 68000, on a vax it's `chmk', and on a 370 Xit's `svc'. Control is transfered to the kernel which (in the case of Xthis particular exception) will index the register into a table X(called the sysent table) to get the address of the actual routine in Xkernel memory to call (_open). X XAt least under SCO XENIX this algorithm is modified somewhat. X XWhen a system call is made in a C program on a SCO XENIX system (eg Xopen(S)), it links in a file from libc.a (/lib/386/Slibc.a) (in this Xcase `open.o') written in assembly that loads the register `eax' with Xa system call number and jumps to 7:0 which (a guess) is mapped to an Xinstruction that switches into supervisory mode and jumps to the Xroutine ioint (??) in the kernel address space. The interrupt routine Xhands the system call number (along with the user given arguments) to X_trap with figures out what to sysent table to use (there are a few Xunder SCO XENIX) and does the right thing. X XThe _open routine (in libc.a's open.o) would probably look something Xlike: X X; X; open - open a file for reading or writing X; X X title open X X .386 X XSYSNUM equ 5 ; open's system call number is `5'. Xextrn _errno:dword X Xpublic _open X X_TEXT segment dword use32 public 'CODE' X assume cs: _TEXT X_open proc near X mov eax, SYSNUM ; Get system call number. X X ; X ; I don't even pretend to understand masm syntax. I tried X ; the following line (and variations) without any success. X ; X X; call far 7:0 ; Switch to kernel and call SYSNUM. X X ; X ; Don't laugh, it works. X ; X X db 9ah X dw 0,0 X dw 7 X X jb short _cerror ; below == error. X X xor eax, eax ; zero return value (no error). X ret ; done. X X_cerror: X mov _errno, eax ; Save error code in _errno. X mov eax, -1 ; Return -1 (as error). X ret ; done. X X_open endp X X_TEXT ends X X end X XUnder SCO XENIX the sysent table (struct sysent in <sys/systm.h>) looks Xsomething like: X Xstruct sysent X{ X unsigned char sy_ret; /* Type of return value (int, void ...) */ X unsigned char sy_arg386; /* Number of 386 words args on stack */ X unsigned char sy_nlarg286; /* # of 286 large model word args on stack */ X unsigned char sy_nmarg286; /* 286 Small Middle: max # of args */ X unsigned sy_argmask; /* Argument types on stack. */ X int (*sy_call)(); /* System call address in kernel */ SHAR_EOF true || echo 'restore of xsel386/select.txt failed' fi echo 'End of ecu310 part 31' echo 'File xsel386/select.txt is continued in part 32' echo 32 > _shar_seq_.tmp exit 0 -------------------------------------------------------------------- Warren Tucker, TuckerWare emory!n4hgf!wht or wht@n4hgf.Mt-Park.GA.US Hacker Extraordinaire d' async PADs, pods, proteins and protocols exit 0 # Just in case... -- Kent Landfield INTERNET: kent@sparky.IMD.Sterling.COM Sterling Software, IMD UUCP: uunet!sparky!kent Phone: (402) 291-8300 FAX: (402) 291-4362 Please send comp.sources.misc-related mail to kent@uunet.uu.net.