Usenet 1994 January

home *** CD-ROM | disk | FTP | other *** search

/ Usenet 1994 January / usenetsourcesnewsgroupsinfomagicjanuary1994.iso / sources / unix / volume16 / dist2 / part05 < prev next >

Wrap

Internet Message Format | 1988-10-13 | 49.1 KB

Subject: v16i038: Larry Wall's Configure generator, etc., Part05/07 Newsgroups: comp.sources.unix Sender: sources Approved: rsalz@uunet.UU.NET Submitted-by: lwall@jpl-devvax.jpl.nasa.gov (Larry Wall) Posting-number: Volume 16, Issue 38 Archive-name: dist2/part05 #! /bin/sh # Make a new directory for the dist sources, cd to it, and run kits 1 # thru 7 through sh. When all 7 kits have been run, read README. echo "This is dist 2.0 kit 5 (of 7). If kit 5 is complete, the line" echo '"'"End of kit 5 (of 7)"'" will echo at the end.' echo "" export PATH || (echo "You didn't use sh, you clunch." ; kill $$) mkdir kit mcon mcon/U 2>/dev/null echo Extracting mcon/U/Head.U sed >mcon/U/Head.U <<'!STUFFY!FUNK!' -e 's/X//' X?RCS:$Header: Head.U,v 2.0 88/06/28 23:13:13 lwall Locked $ X?X: X?X: This is the very first unit in the Configure script. It is mostly just X?X: things to keep people from getting into a tizzy right off the bat. X?X: X?RCS: $Log: Head.U,v $ X?RCS: Revision 2.0 88/06/28 23:13:13 lwall X?RCS: Baseline. X?RCS: X?MAKE:Head: Nothing X?MAKE: -pick add $@ %* X#! /bin/sh X# X# If these # comments don't work, trim them. Don't worry about any other X# shell scripts, Configure will trim # comments from them for you. X# X# (If you are trying to port this package to a machine without sh, I would X# suggest you cut out the prototypical config.h from the end of Configure X# and edit it to reflect your system. Some packages may include samples X# of config.h for certain machines, so you might look for one of those.) X# X# $Header: Head.U,v 2.0 88/06/28 23:13:13 lwall Locked $ X# X# Yes, you may rip this off to use in other distribution packages. X# (Note: this Configure script was generated automatically. Rather than X# working with this copy of Configure, you may wish to get metaconfig.) X X: sanity checks XPATH='.:/bin:/usr/bin:/usr/local/bin:/usr/ucb:/usr/local:/usr/lbin:/etc:/usr/new:/usr/new/bin:/usr/nbin' Xexport PATH || (echo "OOPS, this isn't sh. Desperation time. I will feed myself to sh."; sh $0; kill $$) X Xif test ! -t 0; then X echo "Say 'sh Configure', not 'sh <Configure'" X exit 1 Xfi X X(alias) >/dev/null 2>&1 && \ X echo "(I see you are using the Korn shell. Some ksh's blow up on Configure," && \ X echo "especially on exotic machines. If yours does, try the Bourne shell instead.)" X Xif test ! -d ../UU; then X if test ! -d UU; then X mkdir UU X fi X cd UU Xfi X Xcase "$1" in X-d) shift; fastread='yes';; Xesac X !STUFFY!FUNK! echo Extracting kit/makeSH.man sed >kit/makeSH.man <<'!STUFFY!FUNK!' -e 's/X//' X.rn '' }` X''' $Header: makeSH.man,v 2.0 88/06/28 23:12:14 lwall Locked $ X''' X''' $Log: makeSH.man,v $ X''' Revision 2.0 88/06/28 23:12:14 lwall X''' Baseline. X''' X''' X.de Sh X.br X.ne 5 X.PP X\fB\\$1\fR X.PP X.. X.de Sp X.if t .sp .5v X.if n .sp X.. X''' X''' Set up \*(-- to give an unbreakable dash; X''' string Tr holds user defined translation string. X''' X.ie n \{\ X.tr \(*W-\*(Tr X.ds -- \(*W- X.if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10 pitch X.if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\" diablo 12 pitch X.ds L" "" X.ds R" "" X.ds L' ' X.ds R' ' X'br\} X.el\{\ X.ds -- \(em\| X.tr \*(Tr X.ds L" `` X.ds R" '' X.ds L' ` X.ds R' ' X'br\} X.TH MAKESH 1 LOCAL X.SH NAME XmakeSH - a .SH script maker X.SH SYNOPSIS X.B makeSH X[files] X.SH DESCRIPTION X.I MakeSH Xexamines one or more scripts and produces a .SH file that, when run under sh, Xwill produce the original script. XThe .SH script so produced has two sections containing code destined for Xthe output. XThe first section has variable substitutions performed on it (taking values Xfrom config.sh), while the second section does not. XMakeSH does not know which variables you want to have substituted, so it puts Xthe whole script into the second section. XIt's up to you to insert any variable substitutions in the first section Xfor any values you want from config.sh. X.SH AUTHOR XLarry Wall <lwall@jpl-devvax.jpl.nasa.gov> X.SH ENVIRONMENT XNo environment variables are used by X.IR makeSH . X.SH FILES X.SH SEE ALSO Xpat(1) X.br Xmetaconfig(1) X.br Xmakedist(1) X.SH DIAGNOSTICS X.SH BUGS XIt could assume that variables from metaconfig's Glossary need to be Xinitialized in the first section, but I'm too lazy to make it do that. X.rn }` '' !STUFFY!FUNK! echo Extracting mcon/U/fpu.U sed >mcon/U/fpu.U <<'!STUFFY!FUNK!' -e 's/X//' X?RCS:$Header: fpu.U,v 2.0 88/06/28 23:16:43 lwall Locked $ X?RCS: $Log: fpu.U,v $ X?RCS:Revision 2.0 88/06/28 23:16:43 lwall X?RCS:Baseline. X?RCS: X?RCS: X?RCS: Revision 1.0 87/05/22 12:32:25 siegel X?RCS: Initial revision X?RCS: X?MAKE:fpu: contains echo n Myread c X?MAKE: -pick add $@ %* X?S:fpu: X?S: set to be the compile flag for the local floating point unit. X?S:. X?C:FPU: X?C: String containing the flags for the local floating point unit. X?C:. X?H:?%1:#define FPU "$fpu" /**/ X?H:?%1: X: see what floating point compile flags should be used. Xecho " " Xfpu='' Xif $test -r /dev/fpa; then X cat>fpa.c << GOOP X main(){return(1);} XGOOP X cc -ffpa fpa.c -o fpa X fpa > fpa.out 2>&1 X if test ! -s fpa.out; then X dflt='y' X $echo "You seem to have a sun fpa... I can compile the code" X $echo "to use the fpa but it will mean that the code can ONLY" X $echo "run on a machine with a fpa..." X $echo $n "should I compile it in? [$dflt] $c" X rp="use fpa? [$dflt] " X . myread X if $test $ans = "n"; then X fpu='' X else X fpu='-ffpa' X fi X else X $echo " " X $echo "You have the fpa device but I can't seem to use it." X $echo "Maybe you should talk to your sysadmin about this." X $echo "For now, I am not going to compile it in." X $echo " " X fi Xfi Xif $test "$fpu" = ''; then X if $test -r /usr/etc/mc68881version; then X dflt='y' X $echo "There also seems to be the pieces for a 68881. If" X $echo "I compile this in, it will work on all Sun 3's..." X $echo $n "Should I compile for a 68881? [$dflt] $c" X rp="use 68881? [$dflt] " X . myread X if $test $ans = "y"; then X fpu='-f68881' X fi X fi Xfi X !STUFFY!FUNK! echo Extracting mcon/U/active.U sed >mcon/U/active.U <<'!STUFFY!FUNK!' -e 's/X//' X?RCS:$Header: active.U,v 2.0 88/06/28 23:13:58 lwall Locked $ X?RCS: $Log: active.U,v $ X?RCS: Revision 2.0 88/06/28 23:13:58 lwall X?RCS: Baseline. X?RCS: X?MAKE:active myactive: newslib test echo n c d_portable Myread Filexp Oldconfig X?MAKE: -pick add $@ %* X?S:active: X?S: The name of the active file for the news system. This file contains X?S: the list of active newsgroups. The name may have ~ on the front. X?S: The variable myactive is the expanded form. X?S:. X?S:myactive: X?S: This is the same as the active variable, but is filename expanded X?S: so that later Configure units can look at the active file if desired. X?S:. X?C:ACTIVE: X?C: The name of the active file for the news system. This file contains X?C: the list of active newsgroups. The name may have ~ on the front. X?C:. X?H:?%1:#define ACTIVE "$active" /**/ X?H:?%1: X: locate active file Xcase "$active" in X'') X dflt=$newslib/active X ;; X*) dflt="$active";; Xesac Xcont=true Xwhile $test "$cont"; do X echo " " X rp="Where is the active file (~name ok)? [$dflt]" X $echo $n "$rp $c" X . myread X active="$ans" X case "$active" in X ~*) X myactive=`filexp $active` X echo "(That is $myactive on this particular system.)" X case "$d_portable" in X "$undef") active=$myactive ;; X esac X ;; X *) X myactive=$active X ;; X esac X if $test -d $myactive ; then X myactive=$myactive/active X active=$active/active X fi X if $test -f "$myactive"; then X cont='' X else X dflt=n X rp="File $myactive not found. Use that name anyway? [$dflt]" X $echo $n "$rp $c" X . myread X case "$ans" in X y*) cont='';; X esac X dflt='' X fi Xdone X !STUFFY!FUNK! echo Extracting mcon/U/spitshell.U sed >mcon/U/spitshell.U <<'!STUFFY!FUNK!' -e 's/X//' X?RCS:$Header: spitshell.U,v 2.0 88/06/28 23:18:18 lwall Locked $ X?RCS: $Log: spitshell.U,v $ X?RCS: Revision 2.0 88/06/28 23:18:18 lwall X?RCS: Baseline. X?RCS: X?MAKE:spitshell shsharp sharpbang: eunicefix contains X?MAKE: -pick add $@ %* X?S:spitshell: X?S: This variable contains the command necessary to spit out a runnable X?S: shell on this system. It is either cat or a grep -v for # comments. X?S:. X?S:shsharp: X?S: This variable tells further Configure units whether your sh can X?S: handle # comments. X?S:. X?S:sharpbang: X?S: This variable contains the string #! if this system supports that X?S: construct. X?S:. X: see if sh knows # comments Xecho " " Xecho "Checking your sh to see if it knows about # comments..." Xif sh -c '#' >/dev/null 2>&1 ; then X echo "Your sh handles # comments correctly." X shsharp=true X spitshell=cat X echo " " X echo "Okay, let's see if #! works on this system..." X echo "#!/bin/echo hi" > try X $eunicefix try X chmod +x try X try > today X if $contains hi today >/dev/null 2>&1; then X echo "It does." X sharpbang='#!' X else X echo "#! /bin/echo hi" > try X $eunicefix try X chmod +x try X try > today X if test -s today; then X echo "It does." X sharpbang='#! ' X else X echo "It doesn't." X sharpbang=': use ' X fi X fi Xelse X echo "Your sh doesn't grok # comments--I will strip them later on." X shsharp=false X echo "exec grep -v '^#'" >spitshell X chmod +x spitshell X $eunicefix spitshell X spitshell=`pwd`/spitshell X echo "I presume that if # doesn't work, #! won't work either!" X sharpbang=': use ' Xfi X !STUFFY!FUNK! echo Extracting mcon/U/mboxchar.U sed >mcon/U/mboxchar.U <<'!STUFFY!FUNK!' -e 's/X//' X?RCS:$Header: mboxchar.U,v 2.0 88/06/28 23:17:21 lwall Locked $ X?RCS: $Log: mboxchar.U,v $ X?RCS: Revision 2.0 88/06/28 23:17:21 lwall X?RCS: Baseline. X?RCS: X?MAKE:mboxchar: cat package echo n c shsharp Myread Oldconfig X?MAKE: -pick add $@ %* X?S:mboxchar: X?S: This variable contains the eventual value of the MBOXCHAR symbol, X?S: which is how a C program can identify a file as a mailbox. X?S:. X?C:MBOXCHAR: X?C: This symbol contains a character which will match the beginning X?C: of a mailbox file. X?C:. X?H:?%1:#define MBOXCHAR '$mboxchar' /**/ X?H:?%1: X: determine how to determine when a file is a mailbox Xcase "$mboxchar" in X'') dflt=F;; X*) dflt="$mboxchar";; Xesac X$cat <<'EOM' X XIn saving articles, $package wants to differentiate between saving to mailbox Xformat files and normal files. It does this by examining the first character Xof the file in question. On most systems the first line starts "From...", Xso the first character is F. On other systems there are magic cookies like Xcontrol codes between articles, so one of those would be first. On your Xsystem, if a file is in mailbox format, what is the first character of XEOM X$echo $n "that file? [$dflt] $c" Xrp="First char of mailbox? [$dflt]" X. myread Xmboxchar="$ans" Xcase "$mboxchar" in X'F') ;; X*) cat <<'EOM' XYou will need to edit the shell script mbox.saver to properly append an Xarticle to a mailbox. The arguments to the script are documented in XEOM X case "$shsharp" in X false) X echo "comments in mbox.saver.std." X ;; X true) X echo "comments in the shell script itself." X ;; X esac Xesac X !STUFFY!FUNK! echo Extracting mcon/U/d_portable.U sed >mcon/U/d_portable.U <<'!STUFFY!FUNK!' -e 's/X//' X?RCS:$Header: d_portable.U,v 2.0 88/06/28 23:15:29 lwall Locked $ X?RCS: $Log: d_portable.U,v $ X?RCS: Revision 2.0 88/06/28 23:15:29 lwall X?RCS: Baseline. X?RCS: X?MAKE:d_portable: cat echo n c loclist Myread Oldconfig X?MAKE: -pick add $@ %* X?S:d_portable: X?S: This variable conditionally defines the PORTABLE symbol, which X?S: indicates to the C program that it should not assume that it is X?S: running on the machine it was compiled on. X?S:. X?C:PORTABLE: X?C: This symbol, if defined, indicates to the C program that it should X?C: not assume that it is running on the machine it was compiled on. X?C: The program should be prepared to look up the host name, translate X?C: generic filenames, use PATH, etc. X?C:. X?H:?%1:#$d_portable PORTABLE /**/ X?H:?%1: X: decide how portable to be Xcase "$d_portable" in X"$define") dflt=y;; X*) dflt=n;; Xesac X$cat <<'EOH' X XI can set things up so that your shell scripts and binaries are more portable, Xat what may be a noticable cost in performance. In particular, if you Xask to be portable, the following happens: X X 1) shell scripts will rely on the PATH variable rather than using X the paths derived above. X 2) ~username interpretations will be done at run time rather than X by Configure. X 3) the system name will be determined at run time, if at all possible. X XEOH Xrp="Do you expect to run these scripts and binaries on multiple machines? [$dflt]" X$echo $n "$rp $c" X. myread Xcase "$ans" in X y*) d_portable="$define" X for file in $loclist; do X eval $file=$file X done X ;; X *) d_portable="$undef" ;; Xesac X !STUFFY!FUNK! echo Extracting mcon/U/orgname.U sed >mcon/U/orgname.U <<'!STUFFY!FUNK!' -e 's/X//' X?RCS:$Header: orgname.U,v 2.0 88/06/28 23:17:48 lwall Locked $ X?RCS: $Log: orgname.U,v $ X?RCS: Revision 2.0 88/06/28 23:17:48 lwall X?RCS: Baseline. X?RCS: X?MAKE:orgname: sed cat echo n c Myread Loc Oldconfig X?MAKE: -pick add $@ %* X?S:orgname: X?S: This variable contains the eventual value of the ORGNAME symbol, X?S: which contains either the organizaton name or the full pathname X?S: of a file containing the organization name. X?S:. X?C:ORGNAME: X?C: This symbol contains either the organizaton name or the full pathname X?C: of a file containing the organization name, which the program must X?C: be prepared to open and substitute the contents of. X?C:. X?H:?%1:#define ORGNAME "$orgname" /**/ X?H:?%1: X: get organizaton name Xlongshots='/usr/src/new /usr/src/local /usr/local/src' Xcase "$orgname" in X'') if xxx=`loc news/src/defs.h x $longshots`; then X dflt=`$sed -n 's/^.*MYORG[ ]*"$.*$".*$/\1/p' $xxx` X else X dflt='no default' X fi X ;; X*) dflt="$orgname";; Xesac X$cat << 'EOH' X XPlease type the name of your organization as you want it to appear on the XOrganization line of outgoing articles. (It's nice if this also specifies Xyour location. Your city name is probably sufficient if well known.) XFor example: X X University of Southern North Dakota, Hoople X XYou may also put the name of a file, as long as it begins with a slash. XFor example: X X /etc/organization X XEOH Xorgname="no default" Xwhile test "X$orgname" = "Xno default"; do X rp="Organization: [$dflt]" X $echo $n "$rp $c" X . myread X orgname="$ans" Xdone X !STUFFY!FUNK! echo Extracting mcon/U/mallocsrc.U sed >mcon/U/mallocsrc.U <<'!STUFFY!FUNK!' -e 's/X//' X?RCS:$Header: mallocsrc.U,v 2.0 88/06/28 23:17:14 lwall Locked $ X?RCS: $Log: mallocsrc.U,v $ X?RCS: Revision 2.0 88/06/28 23:17:14 lwall X?RCS: Baseline. X?RCS: X?RCS: X?MAKE:mallocsrc mallocobj usemymalloc: echo n c Myread Oldconfig package Guess X?MAKE: -pick add $@ %* X?S:usemymalloc: X?S: This variable contains y if the malloc that comes with this package X?S: is desired over the system's version of malloc. People often include X?S: special versions of malloc for effiency, but such versions are often X?S: less portable. See also mallocsrc and mallocobj. X?S:. X?S:mallocsrc: X?S: This variable contains the name of the malloc.c that comes with X?S: the package, if that malloc.c is preferred over the system malloc. X?S: Otherwise the value is null. This variable is intended for generating X?S: Makefiles. X?S:. X?S:mallocobj: X?S: This variable contains the name of the malloc.o that this package X?S: generates, if that malloc.o is preferred over the system malloc. X?S: Otherwise the value is null. This variable is intended for generating X?S: Makefiles. See mallocsrc. X?S:. X: determine which malloc to compile in Xecho " " Xcase "$usemymalloc" in X'') X if bsd || v7; then X dflt='y' X else X dflt='n' X fi X ;; X*) dflt="$usemymalloc" X ;; Xesac Xrp="Do you wish to attempt to use the malloc that comes with $package? [$dflt]" X$echo $n "$rp $c" X. myread Xcase "$ans" in X'') ans=$dflt;; Xesac Xusemymalloc="$ans" Xcase "$ans" in Xy*) mallocsrc='malloc.c'; mallocobj='malloc.o';; X*) mallocsrc=''; mallocobj='';; Xesac X !STUFFY!FUNK! echo Extracting mcon/U/d_scorfl.U sed >mcon/U/d_scorfl.U <<'!STUFFY!FUNK!' -e 's/X//' X?RCS:$Header: d_scorfl.U,v 2.0 88/06/28 23:15:39 lwall Locked $ X?RCS: $Log: d_scorfl.U,v $ X?RCS: Revision 2.0 88/06/28 23:15:39 lwall X?RCS: Baseline. X?RCS: X?MAKE:d_scorfl: test cat echo n c Myread Oldconfig nametype X?MAKE: -pick add $@ %* X?S:d_scorfl: X?S: This variable conditionally defines the SCOREFULL symbol, which X?S: indicates to the C program that any scoreboard kept by the program X?S: should be kept on the basis of the user's full name as opposed to X?S: the user's login name. X?S:. X?C:SCOREFULL: X?C: This symbol, if defined, indicates that any scoreboard kept by the X?C: program should be kept on the basis of the user's full name as opposed X?C: to the user's login name. If the user can change his full name he X?C: can enter multiple scores if this is defined. X?C:. X?H:?%1:#$d_scorfl SCOREFULL /**/ X?H:?%1: X: see how they want the scoreboard kept Xcase "$d_scorfl" in X"$define") dflt=y ;; X*) dflt=n ;; Xesac Xcase "$nametype" in Xother) d_scorfl="$undef" ;; X*) X $cat <<'EOM' X XThe scoreboard can be kept with one score per login name, or one score Xper full name. If users can change their full name, or if there is Xmore than one person on your system with the same full name, you should Xkeep the score by login name (the full name is still printed). XEOM X rp="Do you want the scoreboard kept by full name? [$dflt]" X $echo $n "$rp $c" X . myread X case "$ans" in X y*) d_scorfl="$define" ;; X *) d_scorfl="$undef" ;; X esac X ;; Xesac X !STUFFY!FUNK! echo Extracting mcon/U/Config_h.U sed >mcon/U/Config_h.U <<'!STUFFY!FUNK!' -e 's/X//' X?RCS:$Header: Config_h.U,v 2.0 88/06/28 23:12:43 lwall Locked $ X?X: X?X: This file ends up producing the config.h.SH script, which is run to produce X?X: the config.h file. The file ./.Config_h below contains all the ?H: lines X?X: extracted out of all the units. Metaconfig itself adds the !GROK!THIS!. X?X: Note that this code isn't included into Configure, but must be shipped with. X?X: X?RCS: $Log: Config_h.U,v $ X?RCS: Revision 2.0 88/06/28 23:12:43 lwall X?RCS: Baseline. X?RCS: X?MAKE:Config_h: End Config_sh X?MAKE: -rm -f $$WD/config.h.SH X?MAKE: -pick c_h_weed $@ %* X?MAKE: -pick c_h_weed $@ ./.Config_h Xcase $CONFIG in X'') X if test ! -f config.sh; then X ln ../config.sh . || \ X ln ../../config.sh . || \ X ln ../../../config.sh . || \ X (echo "Can't find config.sh."; exit 1) X echo "Using config.sh from above..." X fi X . ./config.sh X ;; Xesac Xecho "Extracting config.h (with variable substitutions)" Xsed <<!GROK!THIS! >config.h -e 's!^#undef!/\*#undef!' X?Init:/* config.h X?Init: * This file was produced by running the config.h.SH script, which X?Init: * gets its values from config.sh, which is generally produced by X?Init: * running Configure. X?Init: * X?Init: * Feel free to modify any of this as the need arises. Note, however, X?Init: * that running config.h.SH again will wipe out any changes you've made. X?Init: * For a more permanent change edit config.sh and rerun config.h.SH. X?Init: */ X?Init: X !STUFFY!FUNK! echo Extracting mcon/U/d_index.U sed >mcon/U/d_index.U <<'!STUFFY!FUNK!' -e 's/X//' X?RCS:$Header: d_index.U,v 2.0 88/06/28 23:14:58 lwall Locked $ X?RCS: $Log: d_index.U,v $ X?RCS: Revision 2.0 88/06/28 23:14:58 lwall X?RCS: Baseline. X?RCS: X?MAKE:d_index: echo contains n c Myread libc X?MAKE: -pick add $@ %* X?S:d_index: X?S: This variable conditionally defines the index and rindex symbols, which X?S: remap those functions onto strchr and strrchr as necessary. X?S:. X?C:index: X?C: This preprocessor symbol is defined, along with rindex, if the system X?C: uses the strchr and strrchr routines instead. X?C:. X?C:rindex: X?C: This preprocessor symbol is defined, along with index, if the system X?C: uses the strchr and strrchr routines instead. X?C:. X?H:?%1:#$d_index index strchr /* cultural */ X?H:?%1:#$d_index rindex strrchr /* differences? */ X?H:?%1: X: index or strcpy Xecho " " Xcase "$d_index" in Xn) dflt=n;; X*) dflt=y;; Xesac Xif $contains '^index$' libc.list >/dev/null 2>&1 ; then X if $contains '^strchr$' libc.list >/dev/null 2>&1 ; then X echo "Your system has both index() and strchr(). Shall I use" X rp="index() rather than strchr()? [$dflt]" X $echo $n "$rp $c" X . myread X case "$ans" in X n*) d_index="$define" ;; X *) d_index="$undef" ;; X esac X else X d_index="$undef" X echo "index() found." X fi Xelse X if $contains '^strchr$' libc.list >/dev/null 2>&1 ; then X d_index="$define" X echo "strchr() found." X else X echo "No index() or strchr() found!" X d_index="$undef" X fi Xfi X !STUFFY!FUNK! echo Extracting mcon/U/d_newsadm.U sed >mcon/U/d_newsadm.U <<'!STUFFY!FUNK!' -e 's/X//' X?RCS:$Header: d_newsadm.U,v 2.0 88/06/28 23:15:18 lwall Locked $ X?RCS: $Log: d_newsadm.U,v $ X?RCS: Revision 2.0 88/06/28 23:15:18 lwall X?RCS: Baseline. X?RCS: X?MAKE:d_newsadm newsadmin: contains n c echo Myread Oldconfig X?MAKE: -pick add $@ %* X?S:d_newsadm: X?S: This variable conditionally defines the NEWSADMIN symbol, which X?S: indicates to the C program that there is a user who is in charge X?S: of news administration. X?S:. X?S:newsadmin: X?S: This variable holds the login name of the news administrator, if any. X?S:. X?C:NEWSADMIN: X?C: This symbol, if defined, contains the login name of the news X?C: administrator. X?C:. X?H:?%1:#$d_newsadm NEWSADMIN "$newsadmin" /**/ X?H:?%1: X: get news administrator name Xcase "$newsadmin" in X'') X if $contains "^news:" /etc/passwd >/dev/null 2>&1 ; then X dflt=news X elif $contains "^usenet:" /etc/passwd >/dev/null 2>&1 ; then X dflt=news X elif eunice; then X dflt=system X else X dflt=root X fi X ;; X*) dflt="$newsadmin" X ;; Xesac Xcat <<'EOM' X XMany systems keep their news in a private directory, or have a non-superuser Xin charge of administering news. (If you don't have such a user, take the Xdefault answer.) What is the login name (not directory) that is used for news XEOM X$echo $n "administration? [$dflt] $c" Xrp="News admin login? [$dflt]" X. myread Xnewsadmin="$ans" Xcase "$newsadmin" in Xroot) d_newsadm="$undef" ;; X*) d_newsadm="$define" ;; Xesac X !STUFFY!FUNK! echo Extracting mcon/U/cc.U sed >mcon/U/cc.U <<'!STUFFY!FUNK!' -e 's/X//' X?RCS:$Header: cc.U,v 2.0 88/06/28 23:14:06 lwall Locked $ X?RCS: $Log: cc.U,v $ X?RCS: Revision 2.0 88/06/28 23:14:06 lwall X?RCS: Baseline. X?RCS: X?MAKE:cc: echo mansrc cat n c Mcc Myread Guess Oldconfig large X?MAKE: -pick add $@ %* X?S:cc: X?S: This variable holds the name of a command to execute a C compiler which X?S: can resolve multiple global references that happen to have the same X?S: name. Usual values are "cc", "Mcc", and "cc -M". X?S:. X: see if we need a special compiler Xecho " " Xif usg; then X case "$cc" in X '') X case "$Mcc" in X /*) dflt='Mcc' X ;; X *) X case "$large" in X -M*) X dflt='cc' X ;; X *) X if $contains '\-M' $mansrc/cc.1 >/dev/null 2>&1 ; then X dflt='cc -M' X else X dflt='cc' X fi X ;; X esac X ;; X esac X ;; X *) dflt="$cc";; X esac X $cat <<'EOM' X XOn some systems the default C compiler will not resolve multiple global Xreferences that happen to have the same name. On some such systems the X"Mcc" command may be used to force these to be resolved. On other systems Xa "cc -M" command is required. (Note that the -M flag on other systems Xindicates a memory model to use!) What command will force resolution on XEOM X $echo $n "this system? [$dflt] $c" X rp="Command to resolve multiple refs? [$dflt]" X . myread X cc="$ans" Xelse X echo "Not a USG system--assuming cc can resolve multiple definitions." X cc=cc Xfi X !STUFFY!FUNK! echo Extracting mcon/Makefile.SH sed >mcon/Makefile.SH <<'!STUFFY!FUNK!' -e 's/X//' Xcase $CONFIG in X'') X if test ! -f config.sh; then X ln ../config.sh . || \ X ln ../../config.sh . || \ X ln ../../../config.sh . || \ X (echo "Can't find config.sh."; exit 1) X echo "Using config.sh from above..." X fi X . ./config.sh X ;; Xesac X: This forces SH files to create target in same directory as SH file. X: This is so that make depend always knows where to find SH derivatives. Xcase "$0" in X*/*) cd `expr X$0 : 'X$.*$/'` ;; Xesac Xecho "Extracting Makefile (with variable substitutions)" Xcat >Makefile <<!GROK!THIS! X# $Header: Makefile.SH,v 2.0 88/06/28 23:12:24 lwall Locked $ X# X# $Log: Makefile.SH,v $ X# Revision 2.0 88/06/28 23:12:24 lwall X# Baseline. X# X Xbin = $bin Xmansrc = $mansrc Xmanext = $manext X X!GROK!THIS! Xcat >>Makefile <<'!NO!SUBS!' X Xpublic = metaconfig Xprivate = gloss Xmanpages = metaconfig.man Xutil = Makefile X Xc = X Xobj = X Xaddedbyconf = X X# grrr XSHELL = /bin/sh X Xall: $(public) $(private) $(util) X touch all X Xmetaconfig: metaconfig.SH X sh metaconfig.SH X Xgloss: X chmod +x makegloss X makegloss X X# won't work with csh Xinstall: $(public) X export PATH || exit 1 X - if test `pwd` != $(bin); then cp $(public) $(bin); fi X cd $(bin); chmod +x $(public) X - \ Xif test `pwd` != $(mansrc); then \ Xfor page in $(manpages); do \ Xcp $$page $(mansrc)/`basename $$page .man`.$(manext); \ Xdone; \ Xfi X Xclean: X Xrealclean: X rm -f core $(addedbyconf) X X!NO!SUBS! X$eunicefix Makefile !STUFFY!FUNK! echo Extracting mcon/U/newsspool.U sed >mcon/U/newsspool.U <<'!STUFFY!FUNK!' -e 's/X//' X?RCS:$Header: newsspool.U,v 2.0 88/06/28 23:17:44 lwall Locked $ X?RCS: $Log: newsspool.U,v $ X?RCS: Revision 2.0 88/06/28 23:17:44 lwall X?RCS: Baseline. X?RCS: X?MAKE:newsspool: test echo n c d_portable Myread Filexp Oldconfig X?MAKE: -pick add $@ %* X?S:newsspool: X?S: This variable contains the eventual value of the NEWSSPOOL symbol, X?S: which is the directory name where news articles are spooled. It X?S: may have a ~ on the front of it. X?S:. X?C:NEWSSPOOL: X?C: This symbol contains the directory name where news articles are X?C: spooled. The program must be prepared to do ~ expansion on it. X?C:. X?H:?%1:#define NEWSSPOOL "$newsspool" /**/ X?H:?%1: X: locate news spool directory Xcase "$newsspool" in X'') X dflt=/usr/spool/news X ;; X*) dflt="$newsspool";; Xesac Xans='blurfl/dyick' Xcont=true Xwhile $test "$cont"; do X echo " " X rp="Where is news spooled (~name ok)? [$dflt]" X $echo $n "$rp $c" X . myread X newsspool="$ans" X case "$newsspool" in X ~*) X ans=`filexp $newsspool` X echo "(That is $ans on this particular system.)" X case "$d_portable" in X "$undef") newsspool=$ans ;; X esac X ;; X *) X ans=$newsspool X ;; X esac X if test -d $ans; then X cont='' X else X dflt=n X rp="Directory $ans doesn't exist. Use that name anyway? [$dflt]" X $echo $n "$rp $c" X . myread X dflt='' X case "$ans" in X y*) cont='';; X esac X fi Xdone X !STUFFY!FUNK! echo Extracting mcon/U/randbits.U sed >mcon/U/randbits.U <<'!STUFFY!FUNK!' -e 's/X//' X?RCS:$Header: randbits.U,v 2.0 88/06/28 23:18:07 lwall Locked $ X?RCS: $Log: randbits.U,v $ X?RCS: Revision 2.0 88/06/28 23:18:07 lwall X?RCS: Baseline. X?RCS: X?MAKE:randbits: cat rm Myread echo n c X?MAKE: -pick add $@ %* X?S:randbits: X?S: This variable contains the eventual value of the RANDBITS symbol, X?S: which indicates to the C program how many bits of random number X?S: the rand() function produces. X?S:. X?C:RANDBITS: X?C: This symbol contains the number of bits of random number the rand() X?C: function produces. Usual values are 15, 16, and 31. X?C:. X?H:?%1:#define RANDBITS $randbits /**/ X?H:?%1: X: check for size of random number generator Xecho " " Xcase "$randbits" in X'') X echo "Checking to see how many bits your rand function produces..." X $cat >try.c <<'EOCP' X#include <stdio.h> Xmain() X{ X register int i; X register unsigned long tmp; X register unsigned long max; X X for (i=1000; i; i--) { X tmp = (unsigned long)rand(); X if (tmp > max) max = tmp; X } X for (i=0; max; i++) X max /= 2; X printf("%d\n",i); X} XEOCP X if cc try.c -o try >/dev/null 2>&1 ; then X dflt=`try` X else X dflt='?' X echo "(I can't seem to compile the test program...)" X fi X ;; X*) X dflt="$randbits" X ;; Xesac Xrp="How many bits does your rand() function produce? [$dflt]" X$echo $n "$rp $c" X. myread Xrandbits="$ans" X$rm -f try.c try X !STUFFY!FUNK! echo Extracting kit/makeSH sed >kit/makeSH <<'!STUFFY!FUNK!' -e 's/X//' X#!/bin/sh Xfor file do X if test -f $file.SH; then X mv $file.SH $file.SH.old X fi X X cat >$file.SH <<BLURFL Xcase \$CONFIG in X'') X if test ! -f config.sh; then X ln ../config.sh . || \\ X ln ../../config.sh . || \\ X ln ../../../config.sh . || \\ X (echo "Can't find config.sh."; exit 1) X fi X . config.sh X ;; Xesac X: This forces SH files to create target in same directory as SH file. X: This is so that make depend always knows where to find SH derivatives. Xcase "\$0" in X*/*) cd \`expr X\$0 : 'X$.*$/'\` ;; Xesac Xecho "Extracting $file (with variable substitutions)" X: This section of the file will have variable substitutions done on it. X: Move anything that needs config subs from !NO!SUBS! section to !GROK!THIS!. X: Protect any dollar signs and backticks that you do not want interpreted X: by putting a backslash in front. You may delete these comments. X\$spitshell >$file <<!GROK!THIS! XBLURFL X X case `head -1 $file` in X */bin/sh) echo '$startsh' >>$file.SH ;; X esac X X cat >>$file.SH <<BLURFL X!GROK!THIS! X X: In the following dollars and backticks do not need the extra backslash. X\$spitshell >>$file <<'!NO!SUBS!' XBLURFL X X sed -e '1{' -e '/#!.*\/bin\/sh$/d' -e '}' $file >>$file.SH X X cat >>$file.SH <<BLURFL X!NO!SUBS! Xchmod 755 $file X\$eunicefix $file XBLURFL X chmod 755 $file.SH Xdone !STUFFY!FUNK! echo Extracting mcon/U/prefshell.U sed >mcon/U/prefshell.U <<'!STUFFY!FUNK!' -e 's/X//' X?RCS:$Header: prefshell.U,v 2.0 88/06/28 23:18:00 lwall Locked $ X?RCS: $Log: prefshell.U,v $ X?RCS: Revision 2.0 88/06/28 23:18:00 lwall X?RCS: Baseline. X?RCS: X?MAKE:prefshell: test echo n c Myread Oldconfig X?MAKE: -pick add $@ %* X?S:prefshell: X?S: This variable contains the eventual value of the PREFSHELL symbol, X?S: which contains the full name of the preferred user shell on this X?S: system. Usual values are /bin/csh, /bin/ksh, /bin/sh. X?S:. X?C:PREFSHELL: X?C: This symbol contains the full name of the preferred user shell on this X?C: system. Usual values are /bin/csh, /bin/ksh, /bin/sh. X?C:. X?H:?%1:#define PREFSHELL "$prefshell" /**/ X?H:?%1: X: find out which shell people like to use most Xcase "$prefshell" in X'') X if $test -f /bin/ksh; then X dflt='/bin/ksh' X elif $test -f /bin/csh; then X dflt='/bin/csh' X else X dflt='/bin/sh' X fi X ;; X*) dflt="$prefshell";; Xesac Xcont=true Xwhile $test "$cont" ; do X echo " " X echo "Give the full path name of the shell most people like to use on your" X $echo $n "system: [$dflt] $c" X rp="Preferred shell: [$dflt]" X . myread X prefshell=$ans X if test -f $ans; then X cont='' X else X dflt=n X rp="File $ans doesn't exist. Use that name anyway? [$dflt]" X $echo $n "$rp $c" X . myread X dflt='' X case "$ans" in X y*) cont='';; X esac X fi Xdone X !STUFFY!FUNK! echo Extracting mcon/U/d_speedopt.U sed >mcon/U/d_speedopt.U <<'!STUFFY!FUNK!' -e 's/X//' X?RCS:$Header: d_speedopt.U,v 2.0 88/06/28 23:15:47 lwall Locked $ X?RCS: $Log: d_speedopt.U,v $ X?RCS: Revision 2.0 88/06/28 23:15:47 lwall X?RCS: Baseline. X?RCS: X?MAKE:d_speedopt: echo n c Myread Cppsym models X?MAKE: -pick add $@ %* X?S:d_speedopt: X?S: This variable conditionally defines the SPEEDOVERMEM symbol, which X?S: indicates to the C program that it can burn memory in order to save X?S: CPU time. X?S:. X?C:SPEEDOVERMEM: X?C: This symbol, if defined, indicates that the program can use more X?C: memory in order to reduce CPU time. The symbol doesn't say whether X?C: we are more interested in saving text space or data space. X?C:. X?H:?%1:#$d_speedopt SPEEDOVERMEM /**/ X?H:?%1: X: do we want speed at the expense of memory Xecho " " X$cat <EOM X XI can try to optimize this package for either speed or memory. If you have Xlimited address space you may wish to optimize for memory. Otherwise you Xshould probably optimize for speed. X XEOM Xcase "$d_speedopt" in X'') if Cppsym $smallmach; then X case "$models" in X *large*|*huge*) X dflt=speed X ;; X *) X dflt=memory X ;; X esac X else X dflt=speed X fi X ;; X*define*) dflt=speed;; X*) dflt=memory;; Xesac Xrp="What to optimize for? [$dflt]" X$echo $n "$rp $c" X. myread Xcase "$ans" in Xmem*) X d_speedopt="$undef" X ;; X*) X d_speedopt="$define" X ;; Xesac X !STUFFY!FUNK! echo Extracting mcon/U/mansrc.U sed >mcon/U/mansrc.U <<'!STUFFY!FUNK!' -e 's/X//' X?RCS:$Header: mansrc.U,v 2.0 88/06/28 23:17:17 lwall Locked $ X?RCS: $Log: mansrc.U,v $ X?RCS: Revision 2.0 88/06/28 23:17:17 lwall X?RCS: Baseline. X?RCS: X?MAKE:mansrc manext: test echo n c Myread Loc Filexp Oldconfig X?MAKE: -pick add $@ %* X?S:mansrc: X?S: This variable contains the name of the directory in which manual X?S: source pages are to be put. It is the responsibility of the X?S: Makefile.SH to get the value of this into the proper command. X?S:. X?S:manext: X?S: This variable contains the extension that the manual page should X?S: have: one of 'n', 'l', or '1'. The Makefile must supply the '.'. X?S: See mansrc. X?S:. X: determine where manual pages go Xcase "$mansrc" in X'') X dflt=`loc . /usr/man/man1 /usr/man/mann /usr/man/local/man1 /usr/man/u_man/man1 /usr/man/man1` X ;; X*) dflt="$mansrc" X ;; Xesac Xcont=true Xwhile $test "$cont" ; do X echo " " X rp="Where do the manual pages (source) go? [$dflt]" X $echo $n "$rp $c" X . myread X mansrc=`filexp "$ans"` X if test -d $mansrc; then X cont='' X else X dflt=n X rp="Directory $mansrc doesn't exist. Use that name anyway? [$dflt]" X $echo $n "$rp $c" X . myread X dflt='' X case "$ans" in X y*) cont='';; X esac X fi Xdone Xcase "$mansrc" in X*l) X manext=l X ;; X*n) X manext=n X ;; X*C) X manext=C X ;; X*) X manext=1 X ;; Xesac X !STUFFY!FUNK! echo Extracting mcon/U/privlib.U sed >mcon/U/privlib.U <<'!STUFFY!FUNK!' -e 's/X//' X?RCS:$Header: privlib.U,v 2.0 88/06/28 23:18:04 lwall Locked $ X?RCS: $Log: privlib.U,v $ X?RCS: Revision 2.0 88/06/28 23:18:04 lwall X?RCS: Baseline. X?RCS: X?MAKE:privlib: package echo cat n c d_portable Myread Filexp Oldconfig X?MAKE: -pick add $@ %* X?S:privlib: X?S: This variable contains the eventual value of the PRIVLIB symbol, X?S: which is the name of the private library for this package. It may X?S: have a ~ on the front. X?S:. X?C:PRIVLIB: X?C: This symbol contains the name of the private library for this package. X?C: The library is private in the sense that it needn't be in anyone's X?C: execution path, but it should be accessible by the world. The program X?C: should be prepared to do ~ expansion. X?C:. X?H:?%1:#define PRIVLIB "$privlib" /**/ X?H:?%1: X: determine where private executables go Xcase "$privlib" in X'') X dflt=/usr/lib/$package X test -d /usr/local/lib && dflt=/usr/local/lib/$package X ;; X*) dflt="$privlib" X ;; Xesac X$cat <<EOM X XThe $package package has some auxiliary files that should be put in a library Xthat is accessible by everyone. Where do you want to put these private" XEOM X$echo $n "but accessible files? [$dflt] (~name ok) $c" Xrp="Put private files where? [$dflt]" X. myread Xprivlib="$ans" Xcase "$d_portable" in X"$undef") X privlib=`filexp $privlib` X ;; Xesac X !STUFFY!FUNK! echo Extracting mcon/U/d_normsig.U sed >mcon/U/d_normsig.U <<'!STUFFY!FUNK!' -e 's/X//' X?RCS:$Header: d_normsig.U,v 2.0 88/06/28 23:15:25 lwall Locked $ X?RCS: $Log: d_normsig.U,v $ X?RCS: Revision 2.0 88/06/28 23:15:25 lwall X?RCS: Baseline. X?RCS: X?MAKE:d_normsig jobslib: test Guess X?MAKE: -pick add $@ %* X?S:d_normsig: X?S: This variable conditionally defines the NORMSIG symbol, which X?S: indicates to the C program that the normal signal handling routines X?S: should be used, as opposed to the ones in 4.1bsd (sigset, etc.). X?S:. X?S:jobslib: X?S: This variable holds the argument to be passed to the loader to include X?S: the strange signal handling routines from 4.1bsd. On systems that X?S: have NORMSIG defined this variable is null. X?S:. X?C:NORMSIG: X?C: This symbol, if defined, indicates that normal signal handling routines X?C: should be used, as opposed to the ones in 4.1bsd (sigset, etc.). X?C:. X?H:?%1:#$d_normsig NORMSIG /**/ X?H:?%1: X: see if we need -ljobs and if we have sigset, etc. Xecho " " Xif $test -r /usr/lib/libjobs.a || $test -r /usr/local/lib/libjobs.a ; then X echo "Jobs library found." X d_normsig="$undef" X jobslib='-ljobs' Xelse X if bsd; then X echo "No jobs library found. (I suppose this is at least 4.2...)" X else X echo "No jobs library found. (That's okay, we all have our faults.)" X fi X d_normsig="$define" X jobslib='' Xfi X !STUFFY!FUNK! echo Extracting mcon/U/newslevel.U sed >mcon/U/newslevel.U <<'!STUFFY!FUNK!' -e 's/X//' X?RCS:$Header: newslevel.U,v 2.0 88/06/28 23:17:37 lwall Locked $ X?RCS: $Log: newslevel.U,v $ X?RCS: Revision 2.0 88/06/28 23:17:37 lwall X?RCS: Baseline. X?RCS: X?MAKE:newslevel: contains test myactive echo n c Myread X?MAKE: -pick add $@ %* X?S:newslevel: X?S: The current revision level of the Usenet news system, encoded X?S: as 1000 * major rev + 10 * minor rev + sub rev. For instance, X?S: news 2.10.3 is encode as 2103, and 2.11 as 2110. X?S:. X?C:NEWSLEVEL: X?C: The current revision level of the Usenet news system, encoded X?C: as 1000 * major rev + 10 * minor rev + sub rev. For instance, X?C: news 2.10.3 is encode as 2103, and 2.11 as 2110. X?C:. X?H:?%1:#define NEWSLEVEL $newslevel /**/ X?H:?%1: X: check for news version Xif test -f $myactive; then X if ???; then X dflt=2110 X elif $test -f $newslib/cunbatch; then X dflt=2103 X elif $contains ' [0-9][0-9]* [0-9]' "$myactive" >/dev/null 2>&1; then X dflt=2102 X else X dflt=2101 X fi Xelse X dflt=$newslevel Xfi X$cat <<EOM X XThe following news version number is a multiplexed integer: X 1000 * major rev + 10 * minor rev + sub rev. XNews 2.10.3 would be 2103. 2.11 comes out as 2110. X XEOM Xrp="What version of news are you going to be running? [$dflt]" X$echo $n "$rp $c" X. myread Xnewslevel="$ans" X !STUFFY!FUNK! echo Extracting mcon/U/pager.U sed >mcon/U/pager.U <<'!STUFFY!FUNK!' -e 's/X//' X?RCS:$Header: pager.U,v 2.0 88/06/28 23:17:55 lwall Locked $ X?RCS: $Log: pager.U,v $ X?RCS: Revision 2.0 88/06/28 23:17:55 lwall X?RCS: Baseline. X?RCS: X?MAKE:pager: pg more test echo n c Myread Oldconfig X?MAKE: -pick add $@ %* X?S:pager: X?S: This variable contains the name of the preferred pager on the system. X?S: Usual values are (the full pathnames of) more, less, pg, or cat. X?S:. X: locate the preferred pager for this system Xcase "$pager" in X'') X case "$pg" in X /*) dflt=$pg X ;; X esac X case "$more" in X /*) dflt=$more X ;; X esac X case "$dflt" in X '') dflt=/usr/ucb/more X ;; X esac X ;; X*) dflt="$pager";; Xesac Xpager='blurfl/dyick' Xecho " " Xecho "(If your kernel does terminal paging then you may answer this with '/bin/cat'.)" Xcont=true Xwhile $test "$cont" ; do X rp="What pager is used on your system? [$dflt]" X $echo $n "$rp $c" X . myread X pager="$ans" X case "$ans" in X /*) X if test -f $ans; then X cont='' X else X dflt=n X rp="File $ans doesn't exist. Use that name anyway? [$dflt]" X $echo $n "$rp $c" X . myread X case "$ans" in X y*) cont='';; X esac X fi X *) X echo "Please give the full path name." X ;; X esac Xdone X !STUFFY!FUNK! echo Extracting mcon/U/d_internet.U sed >mcon/U/d_internet.U <<'!STUFFY!FUNK!' -e 's/X//' X?RCS:$Header: d_internet.U,v 2.0 88/06/28 23:15:04 lwall Locked $ X?RCS: $Log: d_internet.U,v $ X?RCS: Revision 2.0 88/06/28 23:15:04 lwall X?RCS: Baseline. X?RCS: X?MAKE:d_internet: echo n c Myread Oldconfig X?MAKE: -pick add $@ %* X?S:d_internet: X?S: This variable conditionally defines the INTERNET symbol, which X?S: indicates to the C program that there is a mailer available which X?S: supports internet-style addresses (user@site.domain). X?S:. X?C:INTERNET: X?C: This symbol, if defined, indicates that there is a mailer available X?C: which supports internet-style addresses (user@site.domain). X?C:. X?H:?%1:#$d_internet INTERNET /**/ X?H:?%1: X: check for internet mailer Xcase "$d_internet" in X"$define") dflt=y;; X"$undef") dflt=n;; X*) dflt=n;; Xesac Xcat <<EOM X XSome newer mailers can deliver mail to addresses of the INTERNET persuasion, Xsuch as user@host.UUCP. Other older mailers require the complete path to Xthe destination to be specified in the address. Does your mailer understand XEOM X$echo $n "INTERNET addresses? [$dflt] $c" Xrp="Does your mailer understand INTERNET addresses? [$dflt]" X. myread Xcase "$ans" in Xy*) d_internet="$define";; X*) d_internet="$undef";; Xesac X !STUFFY!FUNK! echo Extracting mcon/U/mailer.U sed >mcon/U/mailer.U <<'!STUFFY!FUNK!' -e 's/X//' X?RCS:$Header: mailer.U,v 2.0 88/06/28 23:17:06 lwall Locked $ X?RCS: $Log: mailer.U,v $ X?RCS: Revision 2.0 88/06/28 23:17:06 lwall X?RCS: Baseline. X?RCS: X?MAKE:mailer: test newslibexp mailx Guess Myread echo n c X?MAKE: -pick add $@ %* X?S:mailer: X?S: This variable contains the full pathname of a reasonable mailer. X?S:. X: determine mailer for Rnmail to use Xcase "$mailer" in X'') X if $test -f $mailx; then X dflt="$mailx" X elif $test -f /usr/lib/sendmail; then X dflt=/usr/lib/sendmail X elif usg && $test -f $newslibexp/recmail; then X dflt=$newslibexp/recmail X elif $test -f /bin/mail; then X dflt=/bin/mail X else X dflt=$mail X fi X ;; X*) dflt="$mailer";; Xesac Xcont=true Xwhile $test "$cont" ; do X echo " " X echo "Give the full path name of the program used to deliver mail on your" X $echo $n "system: [$dflt] $c" X rp="Preferred mailer: [$dflt]" X . myread X mailer="$ans" X if test -f $ans; then X cont='' X else X dflt=n X rp="Directory $ans doesn't exist. Use that name anyway? [$dflt]" X $echo $n "$rp $c" X . myread X dflt='' X case "$ans" in X y*) cont='';; X esac X fi Xdone X !STUFFY!FUNK! echo Extracting mcon/U/d_charsprf.U sed >mcon/U/d_charsprf.U <<'!STUFFY!FUNK!' -e 's/X//' X?RCS:$Header: d_charsprf.U,v 2.0 88/06/28 23:14:20 lwall Locked $ X?RCS: $Log: d_charsprf.U,v $ X?RCS: Revision 2.0 88/06/28 23:14:20 lwall X?RCS: Baseline. X?RCS: X?MAKE:d_charsprf: contains X?MAKE: -pick add $@ %* X?S:d_charsprf: X?S: This variable conditionally defines CHARSPRINTF if this system X?S: declares "char *sprintf()" in stdio.h. The trend seems to be to X?S: declare it as "int sprintf()". X?S:. X?C:CHARSPRINTF: X?C: This symbol is defined if this system declares "char *sprintf()" in X?C: stdio.h. The trend seems to be to declare it as "int sprintf()". It X?C: is up to the package author to declare sprintf correctly based on the X?C: symbol. X?C:. X?H:?%1:#$d_charsprf CHARSPRINTF /**/ X?H:?%1: X: see if sprintf is declared as int or pointer to char Xecho " " Xcat >.ucbsprf.c <<'EOF' Xmain() { char buf[10]; exit((unsigned long)sprintf(buf,"%s","foo") > 10L); } XEOF Xif cc .ucbsprf.c -o .ucbsprf >/dev/null 2>&1 && .ucbsprf; then X echo "Your sprintf() returns (int)." X d_charsprf="$undef" Xelse X echo "Your sprintf() returns (char*)." X d_charsprf="$define" Xfi X/bin/rm -f .ucbsprf.c .ucbsprf X !STUFFY!FUNK! echo Extracting mcon/U/Filexp.U sed >mcon/U/Filexp.U <<'!STUFFY!FUNK!' -e 's/X//' X?RCS:$Header: Filexp.U,v 2.0 88/06/28 23:12:58 lwall Locked $ X?X: X?X: This unit produces a shell script which will expand filenames beginning X?X: with tildes. The script is deleted at the end of Configure. X?X: X?RCS: $Log: Filexp.U,v $ X?RCS: Revision 2.0 88/06/28 23:12:58 lwall X?RCS: Baseline. X?RCS: X?MAKE:Filexp: startsh sed test expr eunicefix X?MAKE: -pick add $@ %* X: set up shell script to do ~ expansion Xcat >filexp <<EOSS X$startsh X: expand filename Xcase "\$1" in X ~/*|~) X echo \$1 | $sed "s|~|\${HOME-\$LOGDIR}|" X ;; X ~*) X if $test -f /bin/csh; then X /bin/csh -f -c "glob \$1" X echo "" X else X name=\`$expr x\$1 : '..$[^/]*$'\` X dir=\`$sed -n -e "/^\${name}:/{s/^[^:]*:[^:]*:[^:]*:[^:]*:[^:]*:$[^:]*$.*"'\$'"/\1/" -e p -e q -e '}' </etc/passwd\` X if $test ! -d "\$dir"; then X me=\`basename \$0\` X echo "\$me: can't locate home directory for: \$name" >&2 X exit 1 X fi X case "\$1" in X */*) X echo \$dir/\`$expr x\$1 : '..[^/]*/$.*$'\` X ;; X *) X echo \$dir X ;; X esac X fi X ;; X*) X echo \$1 X ;; Xesac XEOSS Xchmod +x filexp X$eunicefix filexp X !STUFFY!FUNK! echo Extracting mcon/U/gidtype.U sed >mcon/U/gidtype.U <<'!STUFFY!FUNK!' -e 's/X//' X?RCS:$Header: gidtype.U,v 1.0 87/05/22 12:33:47 lwall Exp $ X?RCS: $Log: gidtype.U,v $ X?RCS: Revision 1.0 87/05/22 12:33:47 lwall X?RCS: Initial revision X?RCS: X?MAKE:gidtype: echo n c Myread Oldconfig Loc contains X?MAKE: -pick add $@ %* X?S:gidtype: X?S: This variable defines GIDTYPE to be something like gid_t, int, X?S: ushort, or whatever type is used to declare group ids in the kernel. X?S:. X?C:GIDTYPE: X?C: This symbol has a value like gid_t, int, ushort, or whatever type is X?C: used to declare group ids in the kernel. X?C:. X?H:?%1:#define GIDTYPE $gidtype /**/ X?H:?%1: X: see what type gids are declared as in the kernel Xcase "$gidtype" in X'') X if $contains 'gid_t;' /usr/include/sys/types.h >/dev/null 2>&1 ; then X dflt='gid_t'; X else X set `grep 'groups\[NGROUPS\];' /usr/include/sys/user.h 2>/dev/null` unsigned short X case $1 in X unsigned) dflt="$1 $2" ;; X *) dflt="$1" ;; X esac X fi X ;; X*) dflt="$gidtype" X ;; Xesac Xcont=true Xecho " " Xrp="What type are group ids on this system declared as? [$dflt]" X$echo $n "$rp $c" X. myread Xgidtype="$ans" X !STUFFY!FUNK! echo Extracting mcon/U/d_termio.U sed >mcon/U/d_termio.U <<'!STUFFY!FUNK!' -e 's/X//' X?RCS:$Header: d_termio.U,v 2.0 88/06/28 23:16:15 lwall Locked $ X?RCS: $Log: d_termio.U,v $ X?RCS: Revision 2.0 88/06/28 23:16:15 lwall X?RCS: Baseline. X?RCS: X?MAKE:d_termio: test Cppsym X?MAKE: -pick add $@ %* X?S:d_termio: X?S: This variable conditionally defines the TERMIO symbol, which X?S: indicates to the C program that it should include termio.h rather X?S: than sgtty.h. X?S:. X?C:TERMIO: X?C: This symbol, if defined, indicates that the program should include X?C: termio.h rather than sgtty.h. There are also differences in the X?C: ioctl() calls that depend on the value of this symbol. X?C:. X?H:?%1:#$d_termio TERMIO /**/ X?H:?%1: X: see if this is a termio system Xecho " " Xif Cppsym pyr && $test -r /usr/include/sgtty.h ; then X d_termio="$undef" X echo "sgtty.h found." Xelif $test -r /usr/include/termio.h ; then X d_termio="$define" X echo "termio.h found." Xelif $test -r /usr/include/sgtty.h ; then X d_termio="$undef" X echo "sgtty.h found." Xelse X d_termio="$undef" X echo "Neither termio.h nor sgtty.h found--you could have problems." Xfi X !STUFFY!FUNK! echo Extracting mcon/U/d_flexfnam.U sed >mcon/U/d_flexfnam.U <<'!STUFFY!FUNK!' -e 's/X//' X?RCS:$Header: d_flexfnam.U,v 2.0 88/06/28 23:14:33 lwall Locked $ X?RCS: $Log: d_flexfnam.U,v $ X?RCS: Revision 2.0 88/06/28 23:14:33 lwall X?RCS: Baseline. X?RCS: X?MAKE:d_flexfnam: contains X?MAKE: -pick add $@ %* X?S:d_flexfnam: X?S: This variable conditionally defines the FLEXFILENAMES symbol, which X?S: indicates that the system supports filenames longer than 14 characters. X?S:. X?C:FLEXFILENAMES: X?C: This symbol, if defined, indicates that the system supports filenames X?C: longer than 14 characters. X?C:. X?H:?%1:#$d_flexfnam FLEXFILENAMES /**/ X?H:?%1: X: see if we can have long filenames Xecho " " Xrm -f 123456789abcde Xif (echo hi >123456789abcdef) 2>/dev/null; then X : not version 8 X if test -f 123456789abcde; then X echo 'You cannot have filenames longer than 14 characters. Sigh.' X d_flexfnam="$undef" X else X echo 'You can have filenames longer than 14 characters.' X d_flexfnam="$define" X fi Xelse X : version 8 probably X echo "You can't have filenames longer than 14 chars. V8 can't even think about them!" X d_flexfnam="$undef" Xfi !STUFFY!FUNK! echo Extracting mcon/U/Log.U sed >mcon/U/Log.U <<'!STUFFY!FUNK!' -e 's/X//' X?RCS:$Header: Log.U,v 2.0 88/06/28 23:13:29 lwall Locked $ X?X: X?X: This is a unit that helps people who write SH scripts and keep them under X?X: RCS, but don't think to protect the $Log and $Header keywords from variable X?X: substitution. X?X: X?RCS: $Log: Log.U,v $ X?RCS: Revision 2.0 88/06/28 23:13:29 lwall X?RCS: Baseline. X?RCS: X?MAKE:Log Header: Oldconfig X?MAKE: -pick add $@ %* X: preserve RCS keywords in files with variable substitution, grrr XLog='$Log' XHeader='$Header' X !STUFFY!FUNK! echo "" echo "End of kit 5 (of 7)" cat /dev/null >kit5isdone run='' config='' for iskit in 1 2 3 4 5 6 7; do if test -f kit${iskit}isdone; then run="$run $iskit" else todo="$todo $iskit" fi done case $todo in '') echo "You have run all your kits. Please read README and then type Configure." chmod 755 Configure ;; *) echo "You have run$run." echo "You still need to run$todo." ;; esac : Someone might mail this, so... exit